EUR-Lex - 31967R0190 - EN

Article 1

Annex II/2 to Regulation No 23 (1) on the progressive establishment of a common organisation of the market in fruit and vegetables shall be amended as shown in the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the third day following its publication in the Official Journal of the European Communities.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 27 June 1967.

For the Council

The President

Ch. HEGER

ANNEX Amendments to the common quality standards for tomatoes (Annex II/2 to Regulation No 23)

I. Section II, paragraph C

(a) subparagraph (i):

The following shall be substituted for the last subparagraph: (1) OJ No 30, 20.4.1962, p. 965/62.

"A distinction is made between: - "round" tomatoes,

• "elongated" tomatoes,

• "ribbed" tomatoes which are regular in shape but ribbed ; the ribs must not however extend for more than one-third of the peripheral distance between stalk and top."

(b) subparagraph (ii):

The following shall be substituted for the last subparagraph:

"A distinction is made between: - "round" tomatoes,

• "elongated" tomatoes,

• "ribbed" tomatoes. These tomatoes must, however, be regular in shape."

II. The following shall be substituted for Section III:

"Sizing is determined: - by the maximum equatorial diameter for "round" or "ribbed" tomatoes,

• by the maximum diameter of the widest section for "elongated" tomatoes.

A. Minimum sizes

The minimum diameter of tomatoes classified in the "Extra" Class, Classes I and II is: - 35 mm for "elongated" tomatoes,

• 35 mm for "round" and "ribbed" tomatoes.

B. Uniformity

The scale given below is compulsory for the "Extra" Class and Class 1. >PIC FILE= "T0001727">

"Ribbed" tomatoes of the largest size may not be classified in the "Extra" Class."

III. The following shall be substituted for paragraph B of Section IV:

"For "Extra" Class, Classes I and II : 10 % by number or weight of tomatoes per package conforming to the size immediately above or below that stated on the package. However, for tomatoes of the smallest size-grade and for unsized tomatoes of Class II, the tolerance applies only to produce with a diameter of not less than 28 mm for "elongated" tomatoes and 33 mm for "round" and "ribbed" tomatoes."

IV. The following shall be substituted for the second indent of paragraph D of Section VI: - "The indication "ribbed" or "elongated" where appropriate."