Council Regulation (EU) 2017/1134 of 20 June 2017 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products

Council Regulation (EU) 2017/1134 of 20 June 2017 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products THE COUNCIL OF THE EUROPEAN UNION, Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof, Having regard to the proposal from the European Commission, Whereas: (1) The Union production of 69 agricultural and industrial products that are not listed in the Annex to Council Regulation (EU) No 1387/2013 Council Regulation (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011 (OJ L 354, 28.12.2013, p. 201). is inadequate or non-existent. It is, therefore, in the interest of the Union to completely suspend the autonomous Common Customs Tariff (CCT) duties on those products. (2) It is necessary to modify the conditions for 71 suspensions of autonomous CCT duties currently listed in the Annex to Regulation (EU) No 1387/2013 in order to take into account technical product developments and economic trends on the market. Certain product classifications have been amended to allow the industry to fully benefit from the suspensions in force. Moreover, the Annex to Regulation (EU) No 1387/2013 should be updated due to the need to align or clarify texts in some cases. The modified conditions relate to changes in the product description, classification or end-use requirements. The suspensions that require modifications should be deleted from the list of suspensions in the Annex to Regulation (EU) No 1387/2013, and the modified suspensions should be inserted into that list. (3) It is no longer in the interest of the Union to maintain the suspension of autonomous CCT duties for two of the products that are currently listed in the Annex to Regulation (EU) No 1387/2013. (4) In the interests of clarity, the entries modified by this Regulation should be marked with an asterisk. (5) Regulation (EU) No 1387/2013 should therefore be amended accordingly. (6) As the changes regarding the suspensions for the products concerned provided for in this Regulation have to apply from 1 July 2017, this Regulation should enter into force as a matter of urgency, HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) No 1387/2013 is amended as follows: (1) the rows for the products listed in Annex I to this Regulation are inserted following the order of the CN codes indicated in the first column of the table in the Annex to Regulation (EU) No 1387/2013; (2) the rows for the products for which the CN and TARIC codes are set out in Annex II to this Regulation are deleted.

Article 2

This Regulation shall enter into force on the date of its publication in the Official Journal of the European Union. It shall apply from 1 July 2017. This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Luxembourg, 20 June 2017. For the Council The President H. Dalli

Annex

ANNEX I CN codeTARICDescriptionRate of autonomous dutySupplementary UnitDate foreseen for mandatory reviewex2818300030Aluminium hydroxide oxide in the form of boehmite or pseudoboehmite (CAS RN 1318-23-6)0 %—31.12.2018ex2825700020Molybdic Acid (CAS RN 7782-91-4)0 %—31.12.2021ex2842100040Aluminosilicate (CAS RN 1318-02-1) with a zeolite structure of Aluminophosphate-eighteen (AEI) for use in the manufacture of catalytic preparations (2)0 %—31.12.2021 ex29051100 ex29051900 20 35 Methyl methanesulphonate (CAS RN 66-27-3)0 %—31.12.2021ex29052200203,7-Dimethyloct-6-en-1-ol (CAS RN 106-22-9)0 %—31.12.2021ex2909309015{[(2,2-dimethylbut-3-yn-1-yl)oxy]methyl}benzene (CAS RN 1092536-54-3)0 %—31.12.2021ex29093090251,2-Diphenoxyethane (CAS RN 104-66-5) in the form of powder or as an aqueous dispersion containing by weight 30 % or more but not more than 60 % of 1,2-diphenoxyethane0 %—31.12.2021ex29096000401,4-Di(2-tert-butylperoxyisopropyl)benzene (CAS RN 2781-00-2) or mixture of isomers 1,4-Di(2-tert-butylperoxyisopropyl)benzene and 1,3-di(2-tert-butylperoxyisopropyl)benzene (CAS RN 25155-25-3)0 %—31.12.2017ex2912190010Undecanal (CAS RN 112-44-7)0 %—31.12.2021ex2915120010Aqueous solution containing by weight 60 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1)0 %—31.12.2021ex2916140030 Allyl methacrylate (CAS RN 96-05-9) and its' isomers with a purity by weight of 98 % or more and containing at least: 0,01 % or more but not more than 0,02 % of Allyl alcohol (CAS RN 107-18-6), 0,01 % or more but not more than 0,1 % of Methacrylic acid (CAS RN 79-41-4), and 0,5 % or more but not more than 1 % of 4-Methoxyphenol (CAS RN 150-76-5) 0 %—31.12.2020ex2916399033Methyl 4′-(bromomethyl)biphenyl-2-carboxylate (CAS RN 114772-38-2)0 %—31.12.2021ex2916399073(2,4-Dichlorophenyl)acetyl chloride (CAS RN 53056-20-5)0 %—31.12.2021 ex29202900 ex29209070 50 50 Fosetyl-aluminium (CAS RN 39148-24-8)0 %—31.12.2018 ex29202900 ex29209070 60 40 Fosetyl-sodium (CAS RN 39148-16-8) in form of an aqueous solution with a content by weight of fosetyl-sodium of 35 % or more but not more than 45 % for use in the manufacture of pesticides (2)0 %—31.12.2021 ex2922190040(R)-1-((4-amino-2-bromo-5-fluorophenyl)amino)-3-(benzyloxy)propan-2-ol 4-methylbenzenesulphonate (CAS RN 1294504-64-5)0 %—31.12.2021ex2924297030Sodium 4-(4-methyl-3-nitrobenzoylamino)benzenesulphonate (CAS RN 84029-45-8)0 %—31.12.2021ex2924297050N-Benzyloxycarbonyl-L-tert-leucine isopropylamine salt (CAS RN 1621085-33-3)0 %—31.12.2021ex29269070304,5-Dichloro-3,6-dioxocyclohexa-1,4-diene-1,2-dicarbonitrile (CAS RN 84-58-2)0 %—31.12.2021ex2931900005Diethylmethoxyborane (CAS RN 7397-46-8), whether or not in the form of a solution in tetrahydrofuran according to note 1e to Chapter 29 of the CN0 %—31.12.2020 ex29321400 ex29400000 10 40 1,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4 deoxy-α-D-galactopyranoside (CAS RN 56038-13-2)0 %—31.12.2019ex2932990013(4-Chloro-3-(4-ethoxybenzyl)phenyl)((3aS,5R,6S,6aS)-6-hydroxy 2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-5-yl)methanone (CAS RN 1103738-30-2)0 %—31.12.2021ex29329900184-(4-Bromo-3-((tetrahydro-2H-pyran-2-yloxy)methyl)phenoxy)benzonitrile (CAS RN 943311-78-2)0 %—31.12.2021ex29331990455-Amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1H-pyrazole-3-carbonitrile (CAS RN 120068-79-3)0 %—31.12.2021ex29331990555-Methyl-1-(naphthalen-2-yl)-1,2-dihydro-3H-pyrazol-3-one (CAS RN 1192140-15-0)0 %—31.12.2021ex29332990752,2′-Azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (CAS RN 27776-21-2)0 %—31.12.2021ex29333999102-Aminopyridin-4-ol hydrochloride (CAS RN 1187932-09-7)0 %—31.12.2021ex29333999335-(3-chlorophenyl)-3-methoxypyridine-2-carbonitrile (CAS RN 1415226-39-9)0 %—31.12.2021ex29333999412-chloro-6-(3-fluoro-5-isobutoxyphenyl)nicotinic acid (CAS RN 1897387-01-7)0 %—31.12.2021ex2933399946Fluopicolide (ISO) (CAS RN 239110-15-7) for use in the manufacture of pesticides (2)0 %—31.12.2021

ex29335995 ex29339980 88 51 Diquat dibromide (ISO) (CAS RN 85-00-7) in aqueous solution for use in the manufacture of herbicides (2)0 %—31.12.2021ex2933998042(S)-2,2,4-Trimethylpyrrolidine hydrochloride (CAS RN 1897428-40-8)0 %—31.12.2021ex2933998044(2S,3S,4R)-Methyl 3-ethyl-4-hydroxypyrrolidine-2-carboxylate 4-methylbenzenesulphonate (CAS RN 1799733-43-9)0 %—31.12.2021ex2933998053Potassium (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CUS 0133723-1) (5)0 %—31.12.2018 ex29339980721,4,7-Trimethyl-1,4,7-triazacyclononane (CAS RN 96556-05-7)0 %—31.12.2018ex29349990464-Methoxy-5-(3-morpholin-4-yl-propoxy)-2-nitro-benzonitrile (CAS RN 675126-26-8)0 %—31.12.2021ex2934999047Thidiazuron (ISO) (CAS RN 51707-55-2) for use in the manufacture of pesticides (2)0 %—31.12.2021ex2934999049Cytidine 5′-(disodium phosphate) (CAS RN 6757-06-8)0 %—31.12.2021ex29349990534-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0)0 %—31.12.2021ex29359090306-Aminopyridine-2-sulfonamide (CAS RN 75903-58-1)0 %—31.12.2021ex3204160030 Preparations based on Colourant Reactive Black 5 (CAS RN 17095-24-8) with a content thereof of 60 % or more but not more than 75 % by weight, and including one or more of the following: Colourant Reactive Yellow 201 (CAS RN 27624-67-5), 1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phenyl]azo]-, disodium salt (CAS RN 250688-43-8), or 3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl]azo]-2-[[2-sulfo-4-[[2-(sulphooxy)ethyl]sulfonyl]phenyl]azobenzoic acid sodium salt (CAS RN 906532-68-1) 0 %—31.12.2019ex3204170022Colourant C.I. Pigment Red 169 (CAS RN 12237-63-7) and preparations based thereon with a colourant C.I. Pigment Red 169 content of 50 % or more by weight0 %—31.12.2021ex3204170024Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) and preparations based thereon with a Colourant C.I. Pigment Red 57:1 content of 50 % or more by weight0 %—31.12.2018ex3215907030 Disposable cartridge ink, containing by weight: 1 % or more, but not more than 10 % of amorphous silicon dioxide or 3,8 % or more of dye C.I. Solvent Black 7 in organic solvents for use in the marking of integrated circuits (2) 0 %—31.12.2018 ex35069110 ex35069190 50 50 Preparation containing by weight: 15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers and 10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers dissolved in: Methyl ethyl ketone (CAS RN 78-93-3) Heptane (CAS RN 142-82-5), and Toluene (CAS RN 108-88-3) or light aliphatic solvent naphta (CAS RN 64742-89-8) 0 %—31.12.2020 ex3811210011 Dispersing agent and oxidation inhibitor containing: o-amino polyisobutylenephenol (CAS RN 78330-13-9), more than 30 % by weight but not more than 50 % by weight of mineral oils, used in the manufacture of blends of additives for lubricating oils (2) 0 %—31.12.2021ex3811210019 Additives containing: a polyisobutylene succinimide based mixture, and more than 30 % but not more than 50 % by weight of mineral oils,

having a total base number of more than 40, for use in the manufacture of lubricating oils (2) 0 %—31.12.2019ex3811290075Oxidation inhibitor mainly containing a mixture of isomers of 1-(tert-dodecylthio)propan-2-ol (CAS RN 67124-09-8), used in the manufacture of blends of additives for lubricating oils (2)0 % (2)—31.12.2021ex3811900050 Corrosion inhibitor containing: polyisobutenyl succinic acid and more than 5 % and not more than 20 % by weight of mineral oils for use in the manufacture of blends of additives for fuels (2) 0 %—31.12.2021ex3815909040 Catalyst: containing molybdenum oxide and other metal oxides in a silicon dioxide matrix, in the form of hollow cylindrical solids of a length of 4 mm or more but not more than 12 mm for use in the manufacture of acrylic acid (2) 0 %—31.12.2018ex3824999225 Preparation containing by weight: 25 % or more but not more than 50 % of diethyl carbonate (CAS RN 105-58-8) 25 % or more but not more than 50 % of ethylene carbonate (CAS RN 96-49-1) 10 % or more but not more than 20 % of lithium hexafluorophosphate (CAS RN 21324-40-3) 5 % or more but not more than 10 % of ethyl methyl carbonate (CAS RN 623-53-0) 1 % or more but not more than 2 % of vinylene carbonate (CAS RN 872-36-6) 1 % or more but not more than 2 % of 4-fluoro-1,3-dioxolane-2-one (CAS RN 114435-02-8) Not more than 1 % of 1,5,2,4-Dioxadithiane 2,2,4,4-tetraoxide (CAS RN 99591-74-9) 0 %—31.12.2021 ex38249992274-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0) in an organic solvent0 %—31.12.2021ex3824999230 Aqueous solution of caesium formate and potassium formate containing by weight: 1 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1), 1 % or more but not more than 76 % of potassium formate (CAS RN 590-24-1), and whether or not containing not more than 9 % of additives 0 %—31.12.2021ex3824999240Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent0 %—31.12.2020ex3824999269 Preparation containing by weight: 80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5) 7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate) and not more than 1 % triphenyl phosphate (CAS RN 115-86-6) 0 %—31.12.2020ex3824999345 Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate (CAS RN 4681-22-5) containing by weight: not more than 20 % of disodium sulphate, and not more than 10 % of sodium chloride 0 %—31.12.2021ex3824999670 Powder containing by weight: 28 % or more but not more than 51 % of talc (CAS RN 14807-96-6) 30,5 % or more but not more than 48 % of silicon dioxide (quartz) (CAS RN 14808-60-7) 17 % or more but not more than 26 % of aluminium oxide (CAS RN 1344-28-1) 0 %—31.12.2021ex3824999674 Mixture with a non-stoichiometric composition: with a crystalline structure, with a content of fused magnesia-alumina spinel and with admixtures of silicate phases and aluminates, at least 75 % by weight of which consists of fractions with a grain size of 1-3 mm and at most 25 % consists of fractions with a grain size of 0-1 mm

0 %—31.12.2021ex3824999680 Mixture consisting of: 64 % or more, but not more than 74 % by weight of amorphous silica (CAS RN 7631-86-9) 25 % or more, but not more than 35 % by weight of butanone (CAS RN 78-93-3) and not more than 1 % by weight of 3-(2,3-epoxypropoxy)propyltrimethoxysilane (CAS RN 2530-83-8) 0 %—31.12.2021 ex39011010 ex39019080 20 50 High flow linear low density polyethylene-1-butene/LLDPE (CAS RN 25087-34-7) in form of powder, with a melt flow rate (MFR 190 °C/2,16 kg) of 16 g/10 min or more, but not more than 24 g/10 min and a density (ASTM D 1505) of 0,922 g/cm3 or more, but not more than 0,926 g/cm3 and a vicat softening temperature of min. 94 °C 0 %—31.12.2019ex3906909053 Polyacrylamide powder having an average particle size of less than 2 microns and a melting point of more than 260 °C, containing by weight: 75 % or more but not more than 85 % of polyacrylamide and 15 % or more but not more than 25 % of polyethylene glycol 0 %—31.12.2021ex3906909063Copolymer of (Dimethoxymethylsilyl)propyl methacrylate, butylacrylate, allyl methacrylate, methyl methacrylate and cyclosiloxanes (CAS RN 143106-82-5)0 %—31.12.2021ex3910000045Dimethyl Siloxane, hydroxy-terminated polymer with a viscosity of 38-45 mPa · s (CAS RN 70131-67-8)0 %—31.12.2021ex3910000055 Preparation containing by weight: 55 % or more but not more than 65 % of vinyl terminated polydimethylsiloxane (CAS RN 68083-19-2), 30 % or more but not more than 40 % of dimethylvinylated and trimethylated silica (CAS RN 68988-89-6), and 1 % or more but not more than 5 % of silicic acid, sodium salt, reaction products with chlorotrimethylsilane and isopropyl alcohol (CAS RN 68988-56-7) 0 %—31.12.2021ex3913900030Protein, chemically or enzymatically modified by carboxylation and/or phthalic acid addition, whether or not hydrolysed, having a weight average molecular weight (Mw) of less than 3500000 %—31.12.2018ex3920995970 Tetrafluoroethylene film, put up in rolls, with: a thickness of 50 μm, a melting point of 260 °C, and a specific gravity of 1,75 (ASTM D792) for use in the manufacture of semiconductor devices (2) 0 %—31.12.2021ex3921131010Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,100920 %—31.12.2018 ex3921190050 Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with: a total thickness of more than 0,05 mm but not more than 0,20 mm, a water entry pressure between 5 and 200 kPa according to ISO 811, and an air permeability of 0,08 cm3/cm2/s or more according to ISO 5636-5 0 %—31.12.2021ex3923109010 Photomask or wafer compacts: consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties, having non porous, abrasion resistant or impact resistant surface properties, fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage and

with or without a gasket seal, of a kind used in the photolithography or other semiconductor production to house photomasks or wafers 0 %—31.12.2021 ex39263000 ex87082910 ex87082990 10 10 10 Plastic cover with cips for the exterior rear-view mirror of motor vehicles0 %p/st31.12.2020ex3926909720Housings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene of a kind used for the manufacture of remote controls0 %p/st31.12.2019 ex39269097 ex85129090 77 10 Silicone decoupling ring, with an inner diameter of 15,4 mm (+ 0,0 mm/– 0,1 mm), of a kind used in car parking aid sensor systems0 %p/st31.12.2021ex4016995710 Air intake hose for air supply to the combustion part of the engine comprising at least: one flexible rubber hose, one plastic hose, and metal clips, whether or not a resonator for use in the manufacture of goods of Chapter 87 (2) 0 %p/st31.12.2021ex4016995720Rubber bumper strip with a silicone coating of a length not more than 1200 mm and with at least five plastic clips for use in the manufacture of goods of Chapter 87 (2)0 %p/st31.12.2021 ex59119099 ex84219990 30 92 Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more0 %—31.12.2018ex5911909940Multi-layered non-woven polyester polishing pads, impregnated with polyurethane0 %—31.12.2019ex6805300010Probe tips cleaning material consisting of a polymer matrix containing abrasive particles mounted on a substrate for use in the manufacture of semiconductors (2)0 %—31.12.2021ex7318190030Connecting rod for the master brake cylinder with screw threads on both ends for use in the manufacture of goods of Chapter 87 (2)0 %p/st31.12.2021 ex74101100 ex85079080 ex85459090 10 60 30 Roll of laminate foil of graphite and copper, with: a width of 610 mm or more but not more than 620 mm, and a diameter of 690 mm or more but not more than 710 mm, for use in the manufacture of lithium-ion electric rechargeable batteries (2) 0 %—31.12.2021 ex76071190 ex76071190 47 57 Aluminium foil in rolls: having a purity of 99,99 % by weight, of a thickness of 0,021 mm or more but not more than 0,2 mm, with a width of 500 mm, with a surface oxide layer by 3 to 4 nm thick, and with a cubic texture of more than 95 % 0 %—31.12.2021 ex76071990 ex85079080 10 80 Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with: a width of 595 mm or more but not more than 605 mm, and a diameter of 690 mm or more but not more than 710 mm, for use in the manufacture of cathodes for lithium-ion electric rechargeable batteries (2) 0 %—31.12.2021 ex76169910 ex87089910 ex87089997 30 60 50 Aluminium engine bracket, with dimensions of:

height of more than 10 mm but not more than 200 mm width of more than 10 mm but not more than 200 mm length of more than 10 mm but not more than 200 mm equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics: internal porosity not more than 1 mm; outer porosity not more than 2 mm; Rockwell hardness HRB 10 or more of a kind used in the production of suspensions systems for engines in motor vehicles 0 %p/st31.12.2019 ex8108903020Bars, rods and wire of alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, for use in the manufacture of silencers and exhaust pipes of subheadings 870892 or 87141040 (2)0 %—31.12.2017ex8108905010Alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not more than 3,1 mm, of a width of 1000 mm or more but not more than 1254 mm, for the manufacture of goods of subheading 871410 (2)0 %—31.12.2018ex8108905035Plates, sheets and strips of an alloy of titanium0 %—31.12.2021 ex83016000 ex84139100 ex84199085 ex84389000 ex84689000 ex84769090 ex84799070 ex84819000 ex85030099 ex85159080 ex85369095 ex85371098 ex87089120 ex87089199 ex87089910 ex87089997 20 40 30 20 20 20 83 30 70 30 95 70 10 20 50 40 Keypads of silicone or plastic, whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, whether or not printed or surface treated, whether or not with electrical conducting elements, whether or not with keypads foil glued on the keyboard, whether or not with protective foil, single or multilayer 0 %p/st31.12.2020 ex84099100 ex84099900 30 50 Exhaust manifold with spiral-shaped gas turbine turbocharger component with: a heat-resistance of not more than 1050 °C, and a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm 0 %p/st31.12.2018ex8409990040 Plastic or aluminum cylinder head cover with: a camshaft position sensor (CMPS), metal brackets for mounting on an engine, and two or more gaskets, for use in the manufacture of engines of motor vehicles (2) 0 %p/st31.12.2021 ex8411990065 Spiral-shaped gas turbine turbocharger component: with a heat-resistance of not more than 1050 °C, and with a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm 0 %p/st31.12.2021ex8413302030 Single-cylinder radial-piston high pressure pump for gasoline direct injection with: an operating pressure of 200 bar or more, but not more than 350 bar, a flow control, and a pressure relief valve, for use in the manufacture of engines of motor vehicles (2) 0 %—31.12.2021ex8479907087Fuel hose for internal combustion piston engines with a fuel temperature sensor, with at least two inlet hoses and three outlet hoses for use in the manufacture of engines of motor vehicles (2)0 %p/st31.12.2021ex8481805920Pressure regulating valve for incorporation into compressors of motor vehicle air condition units (2)0 %p/st31.12.2021ex8484200010Mechanical shaft seal for incorporation into rotary compressors for use in the manufacture of motor vehicle air condition units (2)0 %p/st31.12.2021ex8501109956

DC Motor: with a speed rotation of not more than 7000 rpm (without load), with a nominal voltage of 12 V (± 4 V), with a maximum power of 13,78 W (at 3,09 A), with a specified temperature range from – 40 °C to 160 °C, with a gear connection, with a mechanical attachment interface, with 2 electrical connections, with a maximum torque of 100 Nm 0 %—31.12.2021ex8501109958 DC Motor: with a speed rotation of not more than 6500 rpm (without load), with a nominal voltage of 12 V (± 4 V), with a maximal power below than 20 W, with a specified temperature range from – 40 °C to 160 °C, with a worm gear drive, with a mechanical attachment interface, with 2 electrical connections, with a maximum torque of 75 Nm 0 %—31.12.2021 ex8501109965 Electric turbocharger actuator, with: a DC motor, an integrated gear mechanism, a (pulling)force of 200 N or more at a minimum of 140 °C elevated ambient temperature, a (pulling) force of 250 N or more in each position of its stroke, an effective stroke of 15 mm or more but not more than 25 mm, with or without an on-board diagnostics interface 0 %—31.12.2020ex8504318050Transformers for use in the manufacture of electronic drivers, control devices and LED light sources for lighting industry (2)0 %—31.12.2021ex8504409025 Direct current to direct current converter without housing or with housing with connection pins, connection studs, screw connectors, unprotected line connections, connection elements which allow the mounting to a printed circuit board by soldering or any other technology, or other wiring connections requiring further processing 0 %p/st31.12.2021ex8504509570 Solenoid coil with: a rated power of more than 10 W but not more than 15 W, an insulation resistance of 100 M Ohms or more, a DC resistance of not more than 34,8 Ohm (± 10 %) at 20 °C, a rated current of not more than 1,22 A, a rated voltage of not more than 25 V 0 %p/st31.12.2021ex8505110065 Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rectangle, whether or not rounded, with a rectangular or a trapezoidal section having a length of not more than 140 mm, a width of not more than 90 mm, and a thickness of not more than 55 mm, or in the shape of curved rectangle (tile type) having a length of not more than 75 mm, a width of not more than 40 mm, a thickness of not more than 7 mm, and a radius of curvature of more than 86 mm but not more than 241 mm or in the shape of a disc with a diameter of not more than 90 mm, whether or not containing a hole in the centre 0 %p/st31.12.2018 ex8505110075 A quarter sleeve intended to become permanent magnet after magnetization, consisting of at least neodymium, iron and boron, with a width of 9,1 mm or more but not more than 10,5 mm, with a length of 20 mm or more but not more than 30,1 mm, of a kind used on rotors for the manufacture of fuel pumps 0 %p/st31.12.2019ex8507908070 Cut plate of nickel-plated copper foil, with: a width of 70 mm (± 5 mm), a thickness of 0,4 mm (± 0,2 mm),

a length of not more than 55 mm, for use in the manufacture of lithium-ion electric rechargeable batteries (2) 0 %p/st31.12.2021ex8518408093 Audio power amplifier with: an output power of 50 W, an operating voltage of more than 9 V but not more than 16 V, an electrical impedance of not more than 4 Ohm, a sensitivity of more than 80 dB in a metal housing for use in the manufacture of motor vehicles (2) 0 %p/st31.12.2021 ex85229080 ex85299092 30 57 Metal holder, metal fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players (2)0 %p/st31.12.2021 ex85299065 ex85299092 65 53 Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module0 %p/st31.12.2020ex8529909259 LCD modules with: a diagonal measurement of the screen of 14,5 cm or more but not more than 25,5 cm, a LED backlight, a printed circuit board with EPROM (Erasable Programmable Read-only Memory), microcontroller, timing controller, LIN (Local Interconnect Network)bus or APIX2 (Automative Pixel Link) driver module and other active and passive components, 6 to 8 pin plug for power supply and 2 to 4- pin LVDS (Low-voltage differential signalling) or APIX2 interface, whether or not in a housing, for permanent incorporation or permanent mounting into motor vehicles of Chapter 87 (2) 0 %p/st31.12.2020 ex8529909263 LCD module with a diagonal measurement of the screen of 14,5 cm or more but not more than 38,5 cm, with or without a touch screen, with an LED backlight, with a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components, with a plug for power supply and CAN and LVDS interfaces, with or without electronic components for dynamic adjustments of colour, in a housing, with or without mechanical, touch-sensitive or contactless control functions and with or without active cooling system, suitable for installation in motor vehicles of Chapter 87 (2) 0 %p/st31.12.2020ex8529909267 Colour LCD display panel for LCD monitors of heading 8528: with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm, with or without a touch screen, with backlight, micro-controller, with a CAN (Controller area network)-controller with one or more LVDS (Low-voltage differential signalling) interfaces and one or more CAN/power supply sockets or with an APIX (Automotive Pixel Link) controller with APIX interface, in a housing with or without a heat sink at the back of the housing, without a signal-processing module, whether or not with haptic and acoustical feedback, for use in the manufacture of vehicles of Chapter 87 (2) 0 %p/st31.12.2020 ex8536909520Semiconductor chip housing in the form of a plastic frame containing a lead frame equipped with contact pads, for voltages of not more than 1000 V0 %p/st31.12.2020ex8536909592Metallic stamped frame with connections0 %p/st31.12.2018 ex85369095 ex85444993 94 10 Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements0 %p/st31.12.2018ex8537109865

Lever for control module under the steering wheel: with one or more single or multi-positional electrical switches (push-button, rotary or other), whether or not equipped with printed circuit boards and electrical cables, for a voltage of 9 V or more but not more than 16 V, of a kind used in the manufacture of motor vehicles of Chapter 87 0 %p/st31.12.2021ex8537109875 Control unit for keyless access to vehicle and vehicle starting, with electrical switching apparatus, in a plastic housing, for a voltage of 12 V, whether or not with: an antenna, a connector, a metal holder, for use in the manufacture of goods of Chapter 87 (2) 0 %p/st31.12.2021ex8537109892Touch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or sheets, fitted with electric conductors and connectors0 %p/st31.12.2018ex8538909960Front control panel, in the form of a plastic box, with light guides, rotary switches, pressure switches and buttons switches, or other type of switches, without any electrical component, of a kind used in the dashboard of motor vehicles of Chapter 870 %p/st31.12.2021ex8543709015 Laminated electrochromic film consisting of: two outer layers of polyester, a middle layer of acrylic polymer and silicone, and two electric connection terminals 0 %—31.12.2021ex8543709033High-frequency amplifier comprising one or more integrated circuits and one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing0 %—31.12.2021 ex8544429080 12-wire connecting cable containing two connectors of a voltage of 5 V, with a length of not more than 300 mm for use in the manufacture of goods of Chapter 87 (2) 0 %p/st31.12.2021 ex87081010 ex87081090 10 10 Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of Chapter 87 (2)0 %p/st31.12.2021 ex87083010 ex87083091 ex87083099 20 60 10 Motor powered brake actuation unit with a rating of 13,5 V (± 0,5 V) and a ball screw mechanism to control brake fluid pressure in the master cylinder for use in the manufacture of electric motor vehicles (2) 0 %p/st31.12.2019 ex87083010 ex87083091 40 30 Body of disc type brake in BIR (Ball in Ramp) or EPB (Electronic Parking Brake) or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2019 ex87083010 ex87083091 50 10 Drum type parking brake: operating within the service brake disk, with a diameter of 170 mm or more but not more than 195 mm for use in the manufacture of motor vehicles (2) 0 %p/st31.12.2021 ex87083010 ex87083091 60 20 Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87 (2)0 %p/st31.12.2019 ex87083010 ex87083091 70 40 Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2020

ex87084020 ex87084050 20 10 Automatic hydrodynamic gearbox with a hydraulic torque converter, without transfer box and cardan shaft, whether or not with front differential, for use in the manufacture of motor vehicles of Chapter 87 (2) 0 %p/st31.12.2020 ex87085020 ex87085055 10 10 Car axle side-shaft fitted with a constant velocity joint at each end, of a kind used in the manufacture of goods of CN heading 87030 %p/st31.12.2020 ex87085020 ex87085099 20 10 Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle of a length of 1 m or more but not more than 2 m, of a weight of 6 kg or more but not more than 9 kg 0 %p/st31.12.2020 ex87085020 ex87085099 ex87089910 ex87089997 30 20 20 70 Single input, dual output gearcase (transmission) in a cast aluminum housing, with overall dimensions of 273 mm (width) × 131 mm (height) × 187 mm (length), comprising at least: two electro-magnetic one direction clutches, working in opposite sides, an input shaft with an outer diameter of 24 mm (± 1 mm), ended with 22 teeth spline, and a coaxial output bushing with an inner diameter of 22 mm (± 1 mm), ended with 22 teeth spline for use in the manufacture of all-terrain vehicles or utility task vehicles (2) 0 %—31.12.2021 ex87088020 ex87088035 10 10 Upper strut insulator containing a metal holder with three mounting screws, and a rubber bump of a kind used in the manufacture of goods of Chapter 87 0 %p/st31.12.2020 ex87088020 ex87088091 20 10 Rear chassis arm with a protective plastic label equipped with two metal casings with pressed-in rubber silent blocks, of kind used in the manufacture of goods of Chapter 870 %p/st31.12.2020 ex87088020 ex87088091 30 20 Rear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, of kind used in the manufacture of goods of Chapter 870 %p/st31.12.2020ex8708809910Stabilizer bar for front axle equipped with a ball pivot on both ends for use in the manufacture of goods of Chapter 87 (2)0 %p/st31.12.2021 ex87089120 ex87089135 20 10 Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2019 ex87089120 ex87089199 30 30 Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with: an insulating area flatness of not more than 0,1 mm, a permissible particle quantity of 0,3 mg per tank, a distance between pores of 2 mm or more, pore sizes of not more than 0,4 mm, and not more than 3 pores larger than 0,2 mm of a kind used in heat exchangers for car cooling systems 0 %p/st31.12.2020 ex87089420 ex87089435 10 20 Rack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2019 ex87089510 ex87089599 40 10 Front passenger airbag composed of: a metal housing with at least six mounting brackets, an embedded safety cushion, a cartridge filled with compressed gas of a kind used in the manufacture of goods of Chapter 87

0 %p/st31.12.2020 ex87089910 ex87089997 30 15 Front radiator holder whether or not with rubber cushioning for use in the manufacture of goods of Chapter 87 (2)0 %p/st31.12.2021 ex87089910 ex87089997 40 25 Support bracket of iron or steel, with mounting holes, whether or not with fixation nuts, for connecting the gearbox to the car body for use in the manufacture of goods of Chapter 87 (2)0 %p/st31.12.2021 ex87149130 ex87149130 ex87149130 25 35 72 Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (2)0 %—31.12.2018ex9013809020 Electronic semiconductor micro-mirror in a housing suitable for the automatic printing of conductor boards, mainly consisting of a combination of: one or more monolithic application-specific integrated circuits (ASIC), one or more microelectromechanical mirrors (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material of a kind used for incorporation into products of Chapters 84 to 90 and 95 0 %p/st31.12.2019

Annex

ANNEX II CN 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 ex8419908530ex8421990092ex8438900020ex8468900020ex8476901020ex8476909020ex8479907083ex8481900030ex8501109955ex8503009970ex8504318050ex8504409020ex8505110033ex8505110045ex8507908060ex8507908070ex8507908080ex8515908030ex8522908030ex8529906565ex8529909235ex8529909236ex8529909250ex8536904020ex8536904092ex8536904094ex8536904095ex8536909520ex8536909592ex8536909594ex8536909595ex8537109870ex8537109892ex8543709033ex8543900015ex8544499310ex8545909030ex8708299010ex8708301020ex8708301030ex8708309110ex8708309120ex8708309130ex8708309140ex8708309150 ex8708402020ex8708405010ex8708505510ex8708509910ex8708509920ex8708803510ex8708809110ex8708809120ex8708913510ex8708919920ex8708919930ex8708943520ex8708959910ex8708991020ex8708999740ex8708999750ex8708999770ex8714913024ex8714913034ex8714913071ex9013809010