Council Regulation (EU) 2018/2069 of 20 December 2018 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products

Council Regulation (EU) 2018/2069 of 20 December 2018 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products THE COUNCIL OF THE EUROPEAN UNION, Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof, Having regard to the proposal from the European Commission, Whereas: (1) In order to ensure a sufficient and uninterrupted supply of certain agricultural and industrial products which are unavailable in the Union and thereby avoid any disturbances in the market for those products, autonomous Common Customs Tariff (CCT) duties on those products have been suspended by Council Regulation (EU) No 1387/2013 Council Regulation (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011 (OJ L 354, 28.12.2013, p. 201). . Those products can be imported into the Union at reduced or zero duty rates. (2) The Union production of 87 products that are not listed in the Annex to Regulation (EU) No 1387/2013 is inadequate or non-existent. It is therefore in the interest of the Union to suspend totally the autonomous CCT duties on those products. (3) It is necessary to modify the conditions for the suspension of autonomous CCT duties for 26 products listed in the Annex to Regulation (EU) No 1387/2013 in order to take into account technical product developments and economic trends in the market. (4) For certain products listed in the Annex to Regulation (EU) No 1387/2013, the classification in the Combined Nomenclature (CN) of the products covered by suspensions should be amended. (5) It is also necessary, in the interest of the Union, to amend the end date for the mandatory review of 720 products listed in the Annex to Regulation (EU) No 1387/2013 in order to allow duty-free imports beyond that date. The autonomous CCT duty suspensions for those products have been reviewed and new revised dates should be set for their next mandatory review. (6) It is no longer in the interest of the Union to maintain the suspension of autonomous CCT duties for 13 products listed in the Annex to Regulation (EU) No 1387/2013. The suspensions for those products should therefore be deleted. Moreover, according to the communication from the Commission concerning autonomous tariff suspensions and quotas OJ C 363, 13.12.2011, p. 6. (the Commission communication), for practical reasons, requests for tariff suspensions or quotas where the amount of uncollected customs duty is estimated to be less than EUR 15000 per year cannot be taken into consideration. The mandatory review of the existing suspensions has indicated that imports in relation to 197 products listed in the Annex to Regulation (EU) No 1387/2013 do not reach that threshold. Those suspensions should therefore be deleted. (7) In the interest of clarity, and taking into account the number of amendments to be made, the Annex to Regulation (EU) No 1387/2013 should be replaced.

(8) Regulation (EU) No 1387/2013 should therefore be amended accordingly. (9) In order to avoid any interruption of the application of the autonomous suspension scheme and to comply with the guidelines set out in the Commission communication, the changes provided for in this Regulation regarding the suspensions for the products concerned should apply from 1 January 2019. This Regulation should therefore enter into force as a matter of urgency, HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) No 1387/2013 is replaced by the text set out in the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union. It shall apply from 1 January 2019. This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 20 December 2018. For the Council The President E. Köstinger

Annex

ANNEX However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings. Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1) Only the ad valorem duty is suspended. The specific duty shall continue to apply. A surveillance of imports of goods covered by this tariff suspension shall be established in accordance with the procedure laid down in Articles 55 and 56 of Commission Implementing Regulation (EU) 2015/2447 of 24 November 2015 laying down detailed rules for implementing certain provisions of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code (OJ L 343, 29.12.2015, p. 558). CUS (Customs Union and Statistics Number) is assigned to each ECICS record (product). ECICS (European Customs Inventory of Chemical Substances) is an information tool managed by the European Commission, General Directorate for Taxation and Customs Union. More information can be found via the following link: http://ec.europa.eu/taxation_customs/common/databases/ecics/index_en.htm The expression industrial assembly refers to the production of new items in an assembly plant or manufacturing plant. New or amended position or position with prolonged validity CN codeTARICDescriptionRate of autonomous dutySupplementary unitDate foreseen for mandatory reviewex0709591010Fresh or chilled chanterelles for treatment other than simple repacking for retail sale0 %—31.12.2020ex0710210010Peas in pods, of the species Pisum sativum of the variety Hortense axiphium, frozen, of a thickness of not more than 6 mm, to be used, in their pods, in the manufacture of prepared meals0 %—31.12.2023ex0710809550Bamboo shoots, frozen, not put up for retail sale0 %—31.12.2023ex0711590011Mushrooms, excluding mushrooms of the genera Agaricus, Calocybe, Clitocybe, Lepista, Leucoagaricus, Leucopaxillus, Lyophyllum and Tricholoma, provisionally preserved in brine, in sulphur water, or in other preservative solutions, but unsuitable in that state for immediate consumption, for the food-canning industry0 %—31.12.2021

ex07123200 ex07123300 ex07123900 10 10 31 Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices or pieces, for treatment other than simple repacking for retail sale0 %—31.12.2023ex0804100030Dates, fresh or dried, for use in the manufacture (excluding packing) of products of drink or food industries0 %—31.12.2023 08119050 08119070 Fruit of the genus Vaccinium, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter0 %—31.12.2023ex0811909570ex0811909520Boysenberries, frozen, not containing added sugar, not put up for retail sale0 %—31.12.2023ex0811909530Pineapple (Ananas comosus), in pieces, frozen0 %—31.12.2023ex0811909540Rose-hips, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter0 %—31.12.2023 ex15119019 ex15119091 ex15131110 ex15131930 ex15132110 ex15132930 20 20 20 20 20 20 Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of: industrial monocarboxylic fatty acids of subheading 38231910, methyl esters of fatty acids of heading 2915 or 2916, fatty alcohols of subheadings 290517, 290519 and 382370 used for the manufacture of cosmetics, washing products or pharmaceutical products, fatty alcohols of subheading 290516, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products, stearic acid of subheading 38231100, goods of heading 3401, or fatty acids with high purity of heading 2915 0 %—31.12.2019 ex1512191010 Refined safflower oil (CAS RN 8001-23-8) for use in the manufacture of: conjugated linoleic acid of heading 3823, or ethyl- or methyl esters of linoleic acid of heading 2916 0 %—31.12.2020ex1515909992Vegetable oil, refined, containing by weight 35 % or more but not more than 50 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid0 %—31.12.2023ex1516209620Jojoba oil, hydrogenated and interesterified, without any further chemical modification and not subjected to any texturisation process0 %—31.12.2019ex1517909910Vegetable oil, refined, containing by weight 25 % or more but not more than 50 % arachidonic acid or 12 % or more but not more than 65 % docosahexaenoic acid and standardized with high oleic sunflower oil (HOSO)0 %—31.12.2021 ex19019099 ex21069098 39 45 Preparation in powder form containing by weight: 15 % or more but not more than 35 % of wheat derived Maltodextrin, 15 % or more but not more than 35 % of whey (milk serum), 10 % or more but not more than 30 % of refined, bleached, deodorised and non-hydrogenated sunflower oil, 10 % or more but not more than 30 % of blended, aged spray dried cheese, 5 % or more but not more than 15 % of buttermilk, and 0,1 % or more but not more than 10 % of sodium caseinate, disodium phosphate, lactic acid 0 %—31.12.2023 ex19023010 ex19030000 10 20 Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) Wilczek), not put up for retail sale0 %—31.12.2023ex2005910010Bamboo shoots, prepared or preserved, in immediate packings of a net content of more than 5 kg0 %—31.12.2023

ex20079950 ex20079950 ex20079993 83 93 10 Mango puree concentrate, obtained by cooking: of the Genus Mangifera spp., with a sugar content by weight of not more than 30 %, for use in the manufacture of products of food and drink industry 6 %—31.12.2022 ex20079950 ex20079950 84 94 Papaya puree concentrate, obtained by cooking: of the Genus Carica spp., with a sugar content by weight of more than 13 % but not more than 30 %, for use in the manufacture of products of food and drink industry 7,8 %—31.12.2022 ex20079950 ex20079950 85 95 Guava puree concentrate, obtained by cooking: of the Genus Psidium spp., with a sugar content by weight of more than 13 % but not more than 30 %, for use in the manufacture of products of food and drink industry 6 %—31.12.2022ex2008939120Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of products of food processing industries0 %—31.12.2022ex2008994894 Mango puree: not from concentrate, of the genus Mangifera, of a Brix value of 14 or more, but not more than 20, used in the manufacture of products of drink industry 6 %—31.12.2020 ex20089949 ex20089999 30 40 Seedless boysenberry puree not containing added spirit, whether or not containing added sugar0 %—31.12.2019 ex20089949 ex20089999 70 11 Blanched vine leaves of the genus Karakishmish, in brine, containing by weight: more than 6 % of salt concentration, 0,1 % or more but not more than 1,4 % of acidity expressed as citric acid monohydrate, and whether or not but not more than 2000 mg/kg of sodium benzoate according CODEX STAN 192-1995, for use in the manufacture of stuffed vine leaves with rice 0 %—31.12.2022ex2008999120Chinese water chestnuts (Eleocharis dulcis or Eleocharis tuberosa) peeled, washed, blanched, chilled and individually quick-frozen for use in the manufacture of products of food industry for treatment other than simple repacking0 %—31.12.2020 ex20094192 ex20094199 20 70 Pineapple juice: not from concentrate, of the genus Ananas, of a Brix value of 11 or more but not more than 16, used in the manufacture of products of drink industry 8 %—31.12.2020ex2009493091 Pineapple juice, other than in powder form: with a Brix value of more than 20 but not more than 67, a value of more than EUR 30 per 100 kg net weight, containing added sugar, used in the manufacture of products of food or drink industry 0 %—31.12.2019 ex2009813110 Cranberry juice concentrate: of a Brix value of 40 or more but not more than 66, in immediate packings of a content of 50 litres or more 0 %—31.12.2019 ex20098973 ex20098973 11 13 Passion fruit juice and passion fruit juice concentrate, whether or not frozen: with a Brix value of 13,7 or more but not more than 55, of a value of more than EUR 30 per 100 kg net weight, in immediate packings of a content of 50 litres or more, and with added sugar, for the use in the manufacture of products of food or drink industry 0 %—31.12.2019ex2009897920Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more than 67, in immediate packings of a content of 50 litres or more0 %—31.12.2021ex2009897930

Frozen acerola juice concentrate: with a Brix value of more than 48 but not more than 67, in immediate packings of a content of 50 litres or more 0 %—31.12.2023ex2009897985 Acai berry juice concentrate: of the species Euterpe oleracea, frozen, not sweetened, not in powder form, of a Brix value of 23 or more but not more than 32, in immediate packings of a content of 10 kg or more 0 %—31.12.2021 ex20098997 ex20098997 21 29 Passion fruit juice and passion fruit juice concentrate, whether or not frozen: with a Brix value of 10 or more but not more than 13,7, of a value of more than EUR 30 per 100 kg net weight, in immediate packings of a content of 50 litres or more, and without added sugar, for the use in the manufacture of products of food or drink industry 0 %—31.12.2019 ex2009899996 Coconut water unfermented, not containing added spirit or sugar, and in immediate packing of a content of 20 litres or more 0 %—31.12.2021ex2106102020Soya protein concentrate having a protein content by weight, calculated on a dry weight basis, of 65 % or more but not more than 90 % in powder or textured form0 %—31.12.2023ex2106102030Preparation on the base of soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of calcium phosphate0 %—31.12.2023ex2106909245 Preparation containing by weight: more than 30 % but not more than 35 % licorice extract, more than 65 % but not more than 70 % tricaprylin, standardised by weight to 3 % or more but not more than 4 % glabridin 0 %—31.12.2021ex2106909250 Casein protein hydrolysate consisting of: by weight 20 % or more but not more than 70 % free amino acids, and peptones of which by weight more than 90 % having a molecular weight of not more than 2000 Da 0 %—31.12.2022ex2106909847 Preparation, having a moisture content of 1 % or more but not more than 4 %, and containing by weight: 15 % or more but not more than 35 % of buttermilk, 20 % (± 10 %) of lactose, 20 % (± 10 %) of whey protein concentrate, 15 % (± 10 %) of cheddar cheese, 3 % (± 2 %) of salt, 0,1 % or more but not more than 10 % of lactic acid E270, 0,1 % or more but not more than 10 % of gum arabic E414, for use in the manufacture of products of food and drink industry 0 %—31.12.2022ex2519901010Fused magnesia with a purity by weight of 94 % or more0 %—31.12.2021 ex27075000 ex27079980 20 10 Mixture of xylenol-isomers and ethyl phenol-isomers, with a total xylenol content by weight of 62 % or more but less than 95 %0 %—31.12.2019ex2707999910Heavy and medium oils, whose aromatic content exceeds their non-aromatic content, for use as refinery feedstock to undergo one of the specific processes described in Additional note 5 to Chapter 270 %—31.12.2023 ex27101981 ex27101999 10 30 Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing: 90 % or more by weight of saturates, and not more than 0,03 % by weight of sulphur, with a viscosity index of 80 or more 0 %—31.12.2023ex2710199920 Catalytic de-waxed base oil, synthesised from gaseous hydrocarbons, followed by a heavy paraffin conversion process (HPC), containing:

not more than 1 mg/kg of sulphur, more than 99 % by weight of saturated hydrocarbons, more than 75 % by weight of n- and iso-paraffinic hydrocarbons with a carbon chain length of 18 or more but not more than 50, and a kinematic viscosity at 40 °C of more than 6,5 mm2/s, or a kinematic viscosity at 40 °C of more than 11 mm2/s with a viscosity index of 120 or more 0 %—31.12.2019ex2712909910Blend of 1-alkenes (alpha-olefins) (CAS RN 131459-42-2) containing by weight 80 % or more of 1-alkenes of a chain length of 24 carbon atoms or more but not exceeding 64 carbon atoms containing by weight more than 72 % 1-alkenes with more than 28 carbon atoms0 %—31.12.2022ex2804509040Tellurium (CAS RN 13494-80-9) of a purity by weight of 99,99 % or more, but not more than 99,999 %, based on metallic impurities measured by ICP analysis0 %—31.12.202328047000Phosphorus0 %—31.12.2023ex2805120010Calcium with a purity of 98 % or more by weight, in powder or wire form (CAS RN 7440-70-2)0 %—31.12.2020ex2805199020Lithium metal (CAS RN 7439-93-2) of a purity by weight of 98,8 % or more0 %—31.12.2022ex2805301010Alloy of cerium and other rare-earth metals, containing by weight 47 % or more of cerium0 %—31.12.2023 28053020 28053030 28053040 Rare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more0 %—31.12.2020ex2811198010Sulphamidic acid (CAS RN 5329-14-6)0 %—31.12.2023ex2811198020Hydrogen iodide (CAS RN 10034-85-2)0 %—31.12.2021ex2811220010Silicon dioxide (CAS RN 7631-86-9) in the form of powder, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges0 %—31.12.2023 ex2811220015 Amorphous silicon dioxide (CAS RN 60676-86-0): in the form of powder of a purity by weight of 99,0 % or more with a median grain size of 0,7 μm or more, but not more than 2,1 μm where 70 % of the particles have a diameter of not more than 3 μm 0 %—31.12.2020ex2811220060 Calcined amorphous silicon dioxide powder: with a particle size of not more than 20 μm, and of a kind used in the production of polyethylene 0 %—31.12.2019ex2811299010Tellurium dioxide (CAS RN 7446-07-3)0 %—31.12.2022ex2812900010Nitrogen trifluoride (CAS RN 7783-54-2)0 %—31.12.2023ex2816400010Barium hydroxide (CAS RN 17194-00-2)0 %—31.12.2022ex2818109120 Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of: 94 % or more, but less than 98,5 % of aluminium oxide, 2 % (± 1,5 %) of magnesium oxide, 1 % (± 0,6 %) of yttrium oxide, and either 2 % (± 1,2 %) of lanthanum oxide, or 2 % (± 1,2 %) of lanthanum oxide and neodymium oxide, with less than 50 % of the total weight having a particle size of more than 10 mm 0 %—31.12.2020ex2818200010Activated alumina with a specific surface area of at least 350 m2/g0 %—31.12.2019ex2818300020 Aluminium hydroxide (CAS RN 21645-51-2):

in the form of powder with a purity by weight of 99,5 % or more with a decomposition point of 263 °C or more with a particle size of 4 μm (± 1 μm) with a Total-Na2O-content by weight of not more than 0,06 % 0 %—31.12.2020ex2818300030Aluminium hydroxide oxide in the form of boehmite or pseudoboehmite (CAS RN 1318-23-6)0 %—31.12.2023ex2819909010Dichromium trioxide (CAS RN 1308-38-9) for use in metallurgy0 %—31.12.2021ex2823000010 Titanium dioxide (CAS RN 13463-67-7): of a purity by weight of 99,9 % or more, with an average grain-size of 0,7 μm or more but not more than 2,1 μm 0 %—31.12.2022 ex2825100010Hydroxylammonium chloride (CAS RN 5470-11-1)0 %—31.12.202228253000Vanadium oxides and hydroxides0 %—31.12.2021ex2825500020Copper (I or II) oxide containing by weight 78 % or more of copper and not more than 0,03 % of chloride0 %—31.12.2023ex2825500030Copper (II) oxide (CAS RN 1317-38-0), with a particle size of not more than 100 nm0 %—31.12.2020ex2825600010Zirconium dioxide (CAS RN 1314-23-4)0 %—31.12.2022ex2825700010Molybdenum trioxide (CAS RN 1313-27-5)0 %—31.12.2021ex2825700020Molybdic Acid (CAS RN 7782-91-4)0 %—31.12.2021ex2826199010Tungsten hexafluoride (CAS RN 7783-82-6) with a purity by weight of 99,9 % or more0 %—31.12.2020ex2826908010Lithium hexafluorophosphate (1-) (CAS RN 21324-40-3)0 %—31.12.2023ex2826908020Lithium difluorophosphate (CAS RN 24389-25-1)0 %—31.12.2023ex2827398510Copper monochloride (CAS RN 7758-89-6) of a purity by weight of 96 % or more but not more than 99 %0 %—31.12.2023ex2827398520Antimony pentachloride (CAS RN 7647-18-9) of a purity by weight of 99 % or more0 %—31.12.2021ex2827398540Barium chloride dihydrate (CAS RN 10326-27-9)0 %—31.12.2023ex2827499010Hydrated zirconium dichloride oxide0 %—31.12.2023ex2827600010Sodium iodide (CAS RN 7681-82-5)0 %—31.12.2019ex2830100010Disodium tetrasulphide, containing by weight 38 % or less of sodium calculated on the dry weight0 %—31.12.2023ex2833298020Manganese sulphate monohydrate (CAS RN 10034-96-5)0 %—31.12.2023ex2833298030Zirconium sulphate (CAS RN 14644-61-2)0 %—31.12.2020ex2835100010Sodium hypophosphite monohydrate (CAS RN 10039-56-2)0 %—31.12.2022ex2835100020Sodium hypophosphite (CAS RN 7681-53-0)0 %—31.12.2023ex2835100030Aluminium Phosphinate (CAS RN 7784-22-7)0 %—31.12.2023ex2836910020 Lithium carbonate, containing one or more of the following impurities at the concentrations indicated: 2 mg/kg or more of arsenic, 200 mg/kg or more of calcium, 200 mg/kg or more of chlorides, 20 mg/kg or more of iron, 150 mg/kg or more of magnesium, 20 mg/kg or more of heavy metals, 300 mg/kg or more of potassium, 300 mg/kg or more of sodium, 200 mg/kg or more of sulphates, determined according to the methods specified in the European Pharmacopœia 0 %—31.12.2023 ex2836991730Zirconium (IV) basic carbonate (CAS RN 57219-64-4 or 37356-18-6) with a purity by weight of 96 % or more0 %—31.12.2023ex2837190020Copper cyanide (CAS RN 544-92-3)0 %—31.12.2023ex2837200010Tetrasodium hexacyanoferrate (II) (CAS RN 13601-19-9)0 %—31.12.2021ex2839190010Disodium disilicate (CAS RN 13870-28-5)0 %—31.12.2022ex2839900020Calcium silicate (CAS RN 1344-95-2)0 %—31.12.2023ex2840209010Zinc borate (CAS RN 12767-90-7)0 %—31.12.2020ex2841500010Potassium dichromate (CAS RN 7778-50-9)0 %—31.12.2022ex2841700010Diammonium tetraoxomolybdate(2-) (CAS RN 13106-76-8)0 %—31.12.2023ex2841700020Diammonium tridecaoxotetramolybdate(2-) (CAS RN 12207-64-6)0 %—31.12.2019ex2841700030Hexaammonium heptamolybdate, anhydrous (CAS RN 12027-67-7) or as tetrahydrate (CAS RN 12054-85-2)0 %—31.12.2019ex2841700040Diammonium dimolybdate (CAS RN 27546-07-2)0 %—31.12.2021ex2841800010Diammonium wolframate (ammonium paratungstate) (CAS RN 11120-25-5)0 %—31.12.2022ex2841903010Potassium metavanadate (CAS RN 13769-43-2)0 %—31.12.2022ex2841908510Lithium cobalt(III) oxide (CAS RN 12190-79-3) with a cobalt content of at least 59 %0 %—31.12.2022ex2841908520Potassium titanium oxide (CAS RN 12056-51-8) in powder form with a purity of 99 % or more0 %—31.12.2023ex2842100010Synthetic beta zeolite powder0 %—31.12.2023ex2842100020Synthetic chabasite zeolite powder0 %—31.12.2019ex2842100040Aluminosilicate (CAS RN 1318-02-1) with a zeolite structure of Aluminophosphate-eighteen (AEI) for use in the manufacture of catalytic preparations0 %—31.12.2021ex2842100050Fluorphlogopite (CAS RN 12003-38-2)0 %—31.12.2022ex2842901010Sodium selenate (CAS RN 13410-01-0)0 %—31.12.2019ex2842908030Aluminum trititanium dodecachloride (CAS RN 12003-13-3)0 %—31.12.202228451000Heavy water (deuterium oxide) (Euratom) (CAS RN 7789-20-0)0 %—31.12.202328459010Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products (Euratom)0 %—31.12.2023ex2845909010Helium-3 (CAS RN 14762-55-1)0 %—31.12.2021ex2845909020Water enriched at a level of 95 % or more by weight with oxygen-18 (CAS RN 14314-42-2)0 %—31.12.2023ex2845909030(13C)Carbon monoxide (CAS RN 1641-69-6)0 %—31.12.2021

ex28461000 ex38249996 10 53 Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5 % or more by weight0 %—31.12.2023ex2846100020Dicerium tricarbonate (CAS RN 537-01-9), whether or not hydrated0 %—31.12.2023ex2846100030Cerium lanthanum carbonate, whether or not hydrated0 %—31.12.2023 28469010 28469020 28469030 28469090 Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 284610000 %—31.12.2023ex2850002010Silane (CAS RN 7803-62-5)0 %—31.12.2023ex2850002020Arsine (CAS RN 7784-42-1)0 %—31.12.2023ex2850002030Titanium nitride (CAS RN 25583-20-4) with a particle size of not more than 250 nm0 %—31.12.2022ex2850002040Germanium tetrahydride (CAS RN 7782-65-2)0 %—31.12.2021ex2850002060Disilane (CAS RN 1590-87-0)0 %—31.12.2022ex2850002070Cubic Boron nitride (CAS RN 10043-11-5)0 %—31.12.2023ex2850006010Sodium azide (CAS RN 26628-22-8)0 %—31.12.2023ex2853909020Phosphine (CAS RN 7803-51-2)0 %—31.12.2023ex29033919205-Bromopent-1-ene (CAS RN 1119-51-3)0 %—31.12.202229033921Difluoromethane (CAS RN 75-10-5)0 %—31.12.2020ex2903392410Pentafluoroethane (CAS RN 354-33-6)0 %—31.12.2019ex2903392610 1,1,1,2-Tetrafluoroethane feedstock for pharmaceutical grade production conforming to the following specification: not more than 600 ppm by weight of R134 (1,1,2,2-tetrafluoroethane), not more than 5 ppm by weight of R143a (1,1,1-trifluoroethane), not more than 2 ppm by weight of R125 (pentafluoroethane), not more than 100 ppm by weight of R124 (1-chloro-1,2,2,2-tetrafluoroethane), not more than 30 ppm by weight of R114 (1,2-dichlorotetrafluoroethane), not more than 50 ppm by weight of R114a (1,1-Dichlorotetrafluoroethane), not more than 250 ppm by weight of R133a (1-Chloro-2,2,2-Trifluoroethane), not more than 2 ppm by weight of R22 (Chlorodifluoromethane), not more than 2 ppm by weight of R115 (Chloropentafluoroethane), not more than 2 ppm by weight of R12 (Dichlorodifluoromethane), not more than 20 ppm by weight of R40 (Methyl chloride), not more than 20 ppm by weight of R245cb (1,1,1,2,2-pentafluoropropane), not more than 20 ppm by weight of R12B1 (Chlorodifluorobromomethane), not more than 20 ppm by weight of R32 (Difluoromethane), not more than 15 ppm by weight of R31 (Chlorofluoromethane), not more than 10 ppm by weight of R152a (1,1-Difluoroethane), not more than 20 ppm by weight of 1131 (1-Chloro-2 Fluoroethylene), not more than 20 ppm by weight of 1122 (1-Chloro-2,2-Difluoroethylene), not more than 3 ppm by weight of 1234yf (2,3,3,3-Tetrafluoropropene), not more than 3 ppm by weight of 1243zf (3,3,3 Trifluoropropene), not more than 3 ppm by weight of 1122a (1-chloro-1,2-difluoroethylene), not more than 4,5 ppm by weight of 1234yf+1122a+1243zf (2,3,3,3-tetrafluoropropene, +1-Chloro-1,2-Difluoroethylene+3,3,3-Trifluoropropene),

not more than 3 ppm by weight of any individual unspecified/unknown chemical, not more than 10 ppm by weight of all unspecified/unknown chemicals combined, not more than 10 ppm by weight of Water, with an acidity level of not more than 0,1 ppm by weight, without Halides, not more than 0,01 % by volume of High Boilers, without any odour (no malodour), for further purification to an inhalation grade of HFC 134a produced under GMP (Good Manufacturing Practice) for use in the manufacture of a propellant for medical aerosols whose contents are taken into the oral or nasal cavities, and/or the respiratory tract (CAS RN 811-97-2) 0 %—31.12.2019 ex29033927101,1,1,3,3-Pentafluoropropane (CAS RN 460-73-1)0 %—31.12.2023ex2903392810Carbon tetrafluoride (tetrafluoromethane) (CAS RN 75-73-0)0 %—31.12.2023ex2903392820Perfluoroethane (CAS RN 76-16-4)0 %—31.12.2023 ex29033929101H-Perfluorohexane (CAS RN 355-37-3)0 %—31.12.2023290339312,3,3,3-Tetrafluoroprop-1-ene (2,3,3,3-tetrafluoropropene) (CAS RN 754-12-1)0 %—31.12.2022ex2903393520Trans-1,3,3,3-tetrafluoroprop-1-ene (Trans-1,3,3,3-tetrafluoropropene) (CAS RN 29118-24-9)0 %—31.12.2023ex2903393910Perfluoro(4-methyl-2-pentene) (CAS RN 84650-68-0)0 %—31.12.2021ex2903393920(Perfluorobutyl) ethylene (CAS RN 19430-93-4)0 %—31.12.2023ex2903393930Hexafluoropropene (CAS RN 116-15-4)0 %—31.12.2021ex29033939401,1,2,3,4,4-hexafluorobuta-1,3-diene (CAS RN 685-63-2)0 %—31.12.2022ex29037400102-Chloro-1,1-difluoroethane (CAS RN 338-65-8)0 %—31.12.2020ex29037760101,1,1-Trichlorotrifluoroethane (CAS RN 354-58-5)0 %—31.12.2023ex2903779010Chlorotrifluoroethylene (CAS RN 79-38-9)0 %—31.12.2021ex2903780010Octafluoro-1,4-diiodobutane (CAS RN 375-50-8)0 %—31.12.2023ex2903793010Trans-1-chloro-3,3,3-trifluoropropene (CAS RN 102687-65-0)0 %—31.12.2019ex29038980101,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10]octadeca-7,15-diene (CAS RN 13560-89-9)0 %—31.12.2023ex2903898040Hexabromocyclododecane0 %—31.12.2021ex2903898050Chlorocyclopentane (CAS RN 930-28-9)0 %—31.12.2022ex2903898060Octafluorocyclobutane (CAS RN 115-25-3)0 %—31.12.2022ex29039980154-Bromo-2-chloro-1-fluorobenzene (CAS RN 60811-21-4)0 %—31.12.2020ex29039980201,2-Bis(pentabromophenyl)ethane (CAS RN 84852-53-9)0 %—31.12.2023ex2903998040 2,6-Dichlorotoluene, of a purity by weight of 99 % or more and containing: 0,001 mg/kg or less of tetrachlorodibenzodioxines, 0,001 mg/kg or less of tetrachlorodibenzofurans, 0,2 mg/kg or less of tetrachlorobiphenyls 0 %—31.12.2023ex2903998050Fluorobenzene (CAS RN 462-06-6)0 %—31.12.2023ex29039980601,1′-methanediylbis(4-fluorobenzene) (CAS RN 457-68-1)0 %—31.12.2022ex29039980753-Chloro-alpha,alpha,alpha-trifluorotoluene (CAS RN 98-15-7)0 %—31.12.2019ex29039980801-Bromo-3,4,5-trifluorobenzene (CAS RN 138526-69-9)0 %—31.12.2023ex2904100030Sodium p-styrenesulphonate (CAS RN 2695-37-6)0 %—31.12.2019ex2904100050Sodium 2-methylprop-2-ene-1-sulphonate (CAS RN 1561-92-8)0 %—31.12.2019ex2904200010Nitromethane (CAS RN 75-52-5)0 %—31.12.2020ex2904200020Nitroethane (CAS RN 79-24-3)0 %—31.12.2020ex29042000301-Nitropropane (CAS RN 108-03-2)0 %—31.12.2020ex29042000402-Nitropropane (CAS RN 79-46-9)0 %—31.12.2019

ex2904910010Trichloronitromethane (CAS RN 76-06-2), for the manufacture of goods of subheading 3808920 %—31.12.2019ex29049900201-Chloro-2,4-dinitrobenzene (CAS RN 97-00-7)0 %—31.12.2019ex2904990025Difluoromethanesulphonyl chloride (CAS RN 1512-30-7)0 %—31.12.2020ex2904990030Tosyl chloride (CAS RN 98-59-9)0 %—31.12.2019ex29049900351-Fluoro-4-nitrobenzene (CAS RN 350-46-9)0 %—31.12.2020ex29049900404-Chlorobenzenesulphonyl chloride (CAS RN 98-60-2)0 %—31.12.2022ex29049900452-Nitrobenzenesulfonyl Chloride (CAS RN 1694-92-4)0 %—31.12.2023ex2904990050Ethanesulphonyl chloride (CAS RN 594-44-5)0 %—31.12.2023ex29049900604,4′-Dinitrostilbene-2,2′-disulfonic acid (CAS RN 128-42-7)0 %—31.12.2019ex29049900701-Chloro-4-nitrobenzene (CAS RN 100-00-5)0 %—31.12.2019ex29049900801-Chloro-2-nitrobenzene (CAS RN 88-73-3)0 %—31.12.2019ex2905110010Methanol (CAS RN 67-56-1) with a purity of 99,85 % by weight or more0 %—31.12.2023 ex29051100 ex29051900 20 35 Methyl methanesulphonate (CAS RN 66-27-3)0 %—31.12.2021ex2905190011Potassium tert-butanolate (CAS RN 865-47-4), whether or not in the form of a solution in tetrahydrofuran according to note 1e) to Chapter 29 of the CN0 %—31.12.2023ex2905190020Butyltitanate monohydrate, homopolymer (CAS RN162303-51-7)0 %—31.12.2023ex2905190025Tetra-(2-ethylhexyl) titanate (CAS RN 1070-10-6)0 %—31.12.2023ex29051900302,6-Dimethylheptan-4-ol (CAS RN 108-82-7)0 %—31.12.2023ex29051900402,6-Dimethylheptan-2-ol (CAS RN 13254-34-7)0 %—31.12.2019ex2905190070Titanium tetrabutanolate (CAS RN 5593-70-4)0 %—31.12.2022ex2905190080Titanium tetraisopropoxide (CAS RN 546-68-9)0 %—31.12.2022ex2905190085Titanium tetraethanolate (CAS RN 3087-36-3)0 %—31.12.2023ex2905220010Linalool (CAS RN 78-70-6) containing by weight 90,7 % or more of (3R)-(-)-Linalool (CAS RN 126-91-0)0 %—31.12.2019ex29052200203,7-Dimethyloct-6-en-1-ol (CAS RN 106-22-9)0 %—31.12.2021ex2905299010Cis-hex-3-en-1-ol (CAS RN 928-96-1)0 %—31.12.2022ex2905399510Propane-1,3-diol (CAS RN 504-63-2)0 %—31.12.2020ex2905399520Butane-1,2-diol (CAS RN 584-03-2)0 %—31.12.2022ex29053995302,4,7,9-Tetramethyl-4,7-decanediol (CAS RN 17913-76-7)0 %—31.12.2021ex2905399540Decane-1,10-diol (CAS RN 112-47-0)0 %—31.12.2022ex29053995502-Methyl-2-propylpropane-1,3-diol (CAS RN 78-26-2)0 %—31.12.2023ex2905490010Ethylidynetrimethanol (CAS RN 77-85-0)0 %—31.12.2020ex29055998202,2,2-Trifluoroethanol (CAS RN 75-89-8)0 %—31.12.2019ex2906190010Cyclohex-1,4-ylenedimethanol (CAS RN 105-08-8)0 %—31.12.2023ex29061900204,4′-Isopropylidenedicyclohexanol (CAS RN 80-04-6)0 %—31.12.2023 ex29061900504-tert-Butylcyclohexanol (CAS RN 98-52-2)0 %—31.12.2019ex29062900201-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene (CAS RN 79538-03-7)0 %—31.12.2023ex29062900302-Phenylethanol (CAS RN 60-12-8)0 %—31.12.2022ex29062900402-Bromo-5-iodo-benzenemethanol (CAS RN 946525-30-0)0 %—31.12.2020ex29062900502,2′-(m-phenylene)dipropan-2-ol (CAS RN 1999-85-5)0 %—31.12.2022ex2907120020Mixture of meta-cresol (CAS RN 108-39-4) and para-cresol (CAS RN 106-44-5) with a purity by weight of 99 % or more0 %—31.12.2019ex2907120030p-Cresol (CAS RN 106-44-5)0 %—31.12.2019ex29071590102-Naphthol (CAS RN 135-19-3)0 %—31.12.2021ex29071910102,6-Xylenol (CAS RN 576-26-1)0 %—31.12.2019ex2907199020Biphenyl-4-ol (CAS RN 92-69-3)0 %—31.12.2023ex2907210010Resorcinol (CAS RN 108-46-3)0 %—31.12.2023ex29072900156,6′-Di-tert-butyl-4,4′-butylidenedi-m-cresol (CAS RN 85-60-9)0 %—31.12.2023ex29072900204,4′-(3,3,5-Trimethylcyclohexylidene)diphenol (CAS RN 129188-99-4)0 %—31.12.2023ex29072900254-Hydroxybenzyl alcohol (CAS RN 623-05-2)0 %—31.12.2019ex29072900304,4′,4″-Ethylidynetriphenol (CAS RN 27955-94-8)0 %—31.12.2023ex29072900452-Methylhydroquinone (CAS RN 95-71-6)0 %—31.12.2021ex29072900506,6′,6″-Tricyclohexyl-4,4′,4″-butane-1,1,3-triyltri(m-cresol) (CAS RN 111850-25-0)0 %—31.12.2023ex29072900652,2′-Methylenebis(6-cyclohexyl-p-cresol) (CAS RN 4066-02-8)0 %—31.12.2019ex29072900702,2′,2″,6,6′,6″-Hexa-tert-butyl-α,α′,α″-(mesitylene-2,4,6-triyl)tri-p-cresol (CAS RN 1709-70-2)0 %—31.12.2023ex2907290075Biphenyl-4,4′-diol (CAS RN 92-88-6)0 %—31.12.2023ex2907290085Phloroglucinol whether or not hydrated0 %—31.12.2023ex2908190010Pentafluorophenol (CAS RN 771-61-9)0 %—31.12.2023ex29081900204,4′-(Perfluoroisopropylidene)diphenol (CAS RN 1478-61-1)0 %—31.12.2023ex29081900304-Chlorophenol (CAS RN 106-48-9)0 %—31.12.2019ex29081900403,4,5-Trifluorophenol (CAS RN 99627-05-1)0 %—31.12.2020ex29081900504-Fluorophenol (CAS RN 371-41-5)0 %—31.12.2020ex2909199020Bis(2-chloroethyl) ether (CAS RN 111-44-4)0 %—31.12.2023ex2909199030Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99 % or more0 %—31.12.2023ex29091990503-Ethoxy-perfluoro-2-methylhexane (CAS RN 297730-93-9)0 %—31.12.2021ex29092000108-Methoxycedrane (CAS RN 19870-74-7)0 %—31.12.2021ex2909303810Bis(pentabromophenyl) ether (CAS RN 1163-19-5)0 %—31.12.2023

ex29093038201,1′-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene] (CAS RN 21850-44-2)0 %—31.12.2021ex29093038301,1′-(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene (CAS RN 97416-84-7)0 %—31.12.2020ex29093038404-Benzyloxybromobenzene (CAS RN 6793-92-6)0 %—31.12.2023ex29093090102-(Phenylmethoxy)naphthalene (CAS RN 613-62-7)0 %—31.12.2019ex2909309015{[(2,2-dimethylbut-3-yn-1-yl)oxy]methyl}benzene (CAS RN 1092536-54-3)0 %—31.12.2021ex29093090201,2-Bis(3-methyl-phenoxy)ethane (CAS RN 54914-85-1)0 %—31.12.2019ex29093090251,2-Diphenoxyethane (CAS RN 104-66-5) in the form of powder or as an aqueous dispersion containing by weight 30 % or more but not more than 60 % of 1,2-diphenoxyethane0 %—31.12.2021ex29093090303,4,5-Trimethoxytoluene (CAS RN 6443-69-2)0 %—31.12.2020ex29093090401-Chloro-2,5-dimethoxybenzene (CAS RN 2100-42-7)0 %—31.12.2020ex29093090501-Ethoxy-2,3-difluorobenzene (CAS RN 121219-07-6)0 %—31.12.2020ex29093090601-Butoxy-2,3-difluorobenzene (CAS RN 136239-66-2)0 %—31.12.2020ex2909309070O,O,O-1,3,5-trimethylresorcinol (CAS RN 621-23-8)0 %—31.12.2021ex2909309080Oxyfluorfen (ISO) (CAS RN 42874-03-3) with a purity by weight of 97 % or more0 %—31.12.2021ex29094980101-Propoxypropan-2-ol (CAS RN 1569-01-3)0 %—31.12.2020ex29095000104-(2-Methoxyethyl)phenol (CAS RN 56718-71-9)0 %—31.12.2023ex2909500020Ubiquinol (CAS RN 992-78-9)0 %—31.12.2020ex2909600010Bis(α,α-dimethylbenzyl) peroxide (CAS RN 80-43-3)0 %—31.12.2023ex29096000303,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane (CAS RN 24748-23-0), dissolved in isoparaffinic hydrocarbons0 %—31.12.2019ex29109000151,2-Epoxycyclohexane (CAS RN 286-20-4)0 %—31.12.2023ex29109000302,3-Epoxypropan-1-ol (glycidol) (CAS RN 556-52-5)0 %—31.12.2023ex29109000502,3-Epoxypropyl phenyl ether (CAS RN 122-60-1)0 %—31.12.2020ex2910900080Allyl glycidyl ether (CAS RN 106-92-3)0 %—31.12.2021ex2911000010Ethoxy-2,2-difluoroethanol (CAS RN 148992-43-2)0 %—31.12.2020ex2912190010Undecanal (CAS RN 112-44-7)0 %—31.12.2021ex29122900152,6,6-Trimethylcyclohexenecarbaldehyde (alpha-beta isomers mixture) (CAS RN 52844-21-0)0 %—31.12.2021ex2912290025 Mixture of isomers consisting of: 85 (± 10) % by weight of 4-isobutyl-2-methylbenzaldehyde (CAS RN 73206-60-7) 15 (± 10) % by weight of 2-isobutyl-4-methyllbenzaldehyde (CAS RN 68102-28-3) 0 %—31.12.2021ex2912290035Cinnamaldehyde (CAS RN 104-55-2)0 %—31.12.2022ex2912290045p-Phenylbenzaldehyde (CAS RN 3218-36-8)0 %—31.12.2022ex29122900504-Isobutylbenzaldehyde (CAS RN 40150-98-9)0 %—31.12.2023 ex29122900704-tert-Butylbenzaldehyde (CAS RN 939-97-9)0 %—31.12.2023ex29122900804-Isopropylbenzaldehyde (CAS RN 122-03-2)0 %—31.12.2023ex29124900103-Phenoxybenzaldehyde (CAS RN 39515-51-0)0 %—31.12.2023ex29124900204-Hydroxybenzaldehyde (CAS RN 123-08-0)0 %—31.12.2022ex2912490030Salicylaldehyde (CAS RN 90-02-8)0 %—31.12.2020ex29124900403-Hydroxy-p-anisaldehyde (CAS RN 621-59-0)0 %—31.12.2020ex29124900502,6-dihydroxybenzaldehyde (CAS RN 387-46-2)0 %—31.12.2022ex2914199020Heptan-2-one (CAS RN 110-43-0)0 %—31.12.2022ex29141990303-Methylbutanone (CAS RN 563-80-4)0 %—31.12.2022ex2914199040Pentan-2-one (CAS RN 107-87-9)0 %—31.12.2022ex2914199060Zinc acetylacetonate (CAS RN 14024-63-6)0 %—31.12.2023ex2914290015oestr-5(10)-ene-3,17-dione (CAS RN 3962-66-1)0 %—31.12.2023ex2914290020Cyclohexadec-8-enone (CAS RN 3100-36–5)0 %—31.12.2023ex2914290025Cyclohex-2-enone (CAS RN 930-68-7)0 %—31.12.2023ex2914290030(R)-p-Mentha-1(6),8-dien-2-one (CAS RN 6485-40-1)0 %—31.12.2020ex2914290040Camphor0 %—31.12.2023ex2914290050trans-β-Damascone (CAS RN 23726-91-2)0 %—31.12.2021ex29142900702-sec-butylcyclohexanone (CAS RN 14765-30-1)0 %—31.12.2022ex29142900801-(cedr-8-en-9-yl)ethanone (CAS RN 32388-55-9)0 %—31.12.2022ex29143900152,6-Dimethyl-1-indanone (CAS RN 66309-83-9)0 %—31.12.2019ex29143900251,3-Diphenylpropane-1,3-dione (CAS RN 120-46-7)0 %—31.12.2019ex2914390030Benzophenone (CAS RN 119-61-9)0 %—31.12.2022ex29143900504-Phenylbenzophenone (CAS RN 2128-93-0)0 %—31.12.2023ex29143900604-Methylbenzophenone (CAS RN 134-84-9)0 %—31.12.2023ex2914390070Benzil (CAS RN 134-81-6)0 %—31.12.2022ex29143900804′-Methylacetophenone (CAS RN 122-00-9)0 %—31.12.2022ex29145000203′-Hydroxyacetophenone (CAS RN 121-71-1)0 %—31.12.2020ex29145000254′-Methoxyacetophenone (CAS RN 100-06-1)0 %—31.12.2023ex29145000362,7-Dihydroxy-9-fluorenone (CAS RN 42523-29-5)0 %—31.12.2023ex29145000404-(4-Hydroxyphenyl)butan-2-one (CAS RN 5471-51-2)0 %—31.12.2021ex29145000453,4-Dihydroxybenzophenone (CAS RN 10425-11-3)0 %—31.12.2022ex29145000602,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8)0 %—31.12.2022ex29145000653-Methoxyacetophenone (CAS RN 586-37-8)0 %—31.12.2020ex29145000757-Hydroxy-3,4-dihydro-1(2H)-naphthalenone (CAS RN 22009-38-7)0 %—31.12.2020ex29145000802′,6′-Dihydroxyacetophenone (CAS RN 699-83-2)0 %—31.12.2023ex29145000854,4′-Dihydroxybenzophenone (CAS RN 611-99-4)0 %—31.12.2021ex29146980102-Ethylanthraquinone (CAS RN 84-51-5)0 %—31.12.2023ex29146980202-Pentylanthraquinone (CAS RN 13936-21-5)0 %—31.12.2019

ex29146980301,4-Dihydroxyanthraquinone (CAS RN 81-64-1)0 %—31.12.2023ex2914698040p-Benzoquinone (CAS RN 106-51-4)0 %—31.12.2021ex2914698050Reaction mass of 2-(1,2-dimethylpropyl)anthraquinone (CAS RN 68892-28-4) and 2-(1,1-dimethylpropyl)anthraquinone (CAS RN 32588-54-8)0 %—31.12.2019ex29147900151-(4-Methylphenyl)-4,4,4-trifluorobutane-1,3-dione (CAS RN 720-94-5)0 %—31.12.2020ex29147900202,4′-Difluorobenzophenone (CAS RN 342-25-6)0 %—31.12.2022ex29147900251-(7-Bromo-9,9-difluoro-9H-fluoren-2-yl)-2-chloroethanone (CAS RN 1378387-81-5)0 %—31.12.2020ex29147900305-Methoxy-1-[4-(trifluoromethyl)phenyl]pentan-1-one (CAS RN 61718-80-7)0 %—31.12.2023ex29147900351-[4-(benzyloxy)phenyl]-2-bromopropan-1-one (CAS RN 35081-45-9)0 %—31.12.2023ex2914790040Perfluoro(2-methylpentan-3-one) (CAS RN 756-13-8)0 %—31.12.2023ex29147900503′-Chloropropiophenone (CAS RN 34841-35-5)0 %—31.12.2023ex29147900604′-tert-Butyl-2′,6′-dimethyl-3′,5′-dinitroacetophenone (CAS RN 81-14-1)0 %—31.12.2020ex29147900651,4-bis(4-Fluorobenzoyl) Benzene (CAS RN 68418-51-9)0 %—31.12.2021ex29147900704-Chloro-4′-hydroxybenzophenone (CAS RN 42019-78-3)0 %—31.12.2021ex29147900754,4′-Difluorobenzophenone (CAS RN 345-92-6)0 %—31.12.2021ex2914790080Tetrachloro-p-benzoquinone (CAS RN 118-75-2)0 %—31.12.2023ex2915120010Aqueous solution containing by weight 60 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1)0 %—31.12.2021ex2915390010Cis-3-hexenyl acetate (CAS RN 3681-71-8)0 %—31.12.2022ex29153900252-Methylcyclohexyl acetate (CAS RN 5726-19-2)0 %—31.12.2023ex29153900304-tert-butylcyclohexyl acetate (CAS RN 32210-23-4)0 %—31.12.2022ex2915390040tert-Butyl acetate (CAS RN 540-88-5)0 %—31.12.2023ex29153900503-Acetylphenyl acetate (CAS RN 2454-35-5)0 %—31.12.2019ex2915390060Dodec-8-enyl acetate (CAS RN 28079-04-1)0 %—31.12.2020ex2915390065Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4)0 %—31.12.2020ex2915390070Dodec-9-enyl acetate (CAS RN 16974-11-1)0 %—31.12.2020ex2915390075Isobornyl acetate (CAS RN 125-12-2)0 %—31.12.2021ex29153900801-Phenylethyl acetate (CAS RN 93-92-5)0 %—31.12.2021ex29153900852-tert-Butylcyclohexyl acetate (CAS RN 88-41-5)0 %—31.12.2023ex2915601910Ethyl butyrate (CAS RN 105-54-4)0 %—31.12.2022ex2915704010Methyl palmitate (CAS RN 112-39-0)0 %—31.12.2023ex2915903010Methyl laurate (CAS RN 111-82-0)0 %—31.12.2020ex2915907020Methyl (R)-2-fluoropropionate (CAS RN 146805-74-5)0 %—31.12.2022 ex2915907025Methyl octanoate (CAS RN 111-11-5), methyl decanoate (CAS RN 110-42-9) or methyl myristate (CAS RN 124-10-7)0 %—31.12.2023ex29159070303,3-Dimethylbutyryl chloride (CAS RN 7065-46-5)0 %—31.12.2022ex29159070352,2-Dimethylbutanoyl chloride (CAS RN 5856-77-9)0 %—31.12.2023ex2915907045Trimethyl orthoformate (CAS RN 149-73-5)0 %—31.12.2019ex2915907050Allyl heptanoate (CAS RN 142-19-8)0 %—31.12.2019ex2915907055Triethyl orthoformate (CAS RN 122-51-0)0 %—31.12.2023ex2915907060Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0)0 %—31.12.2020ex29159070652-Ethyl-2-methyl butanoic acid (CAS RN 19889-37-3)0 %—31.12.2020ex2915907080Ethyl difluoroacetate (CAS RN 454-31-9)0 %—31.12.2021ex29161200102-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate (CAS RN 61167-58-6)0 %—31.12.2023ex29161200402,4-Di-tert-pentyl-6-[1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl]phenylacrylate (CAS RN 123968-25-2)0 %—31.12.2023ex29161200702-(2-Vinyloxyethoxy)ethyl acrylate (CAS RN 86273-46-3)0 %—31.12.2022ex2916130020Zinc dimethacrylate, in the form of powder (CAS RN 13189-00-9)0 %—31.12.2023ex2916130030Zinc monomethacrylate powder (CAS RN 63451-47-8) whether or not containing not more than 17 % by weight of manufacturing impurities0 %—31.12.2020ex29161400102,3-Epoxypropyl methacrylate (CAS RN 106-91-2)0 %—31.12.2023ex2916140020Ethyl methacrylate (CAS RN 97-63-2)0 %—31.12.2023ex2916199520Methyl 3,3-dimethylpent-4-enoate (CAS RN 63721-05-1)0 %—31.12.2023ex2916199540Sorbic acid (CAS RN 110-44-1) for use in the manufacture of animal feeds0 %—31.12.2023ex2916199550Methyl 2-fluoroacrylate (CAS RN 2343-89-7)0 %—31.12.2019ex2916200015Transfluthrin (ISO) (CAS RN 118712-89-3)0 %—31.12.2021ex2916200020Mixture of the (1S,2R,6R,7R)-and(1R,2R,6R,7S)-isomers of ethyl tricyclo[5.2.1.0(2,6)]decane-2-carboxylate (CAS RN's 80657-64-3 and 80623-07-0)0 %—31.12.2022ex2916200050Ethyl 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate (CAS RN 97-41-6)0 %—31.12.2023ex29162000603-Cyclohexylpropionic acid (CAS RN 701-97-3)0 %—31.12.2020ex2916200070Cyclopropanecarbonyl chloride (CAS RN 4023-34-1)0 %—31.12.2023ex2916310010Benzyl benzoate (CAS RN 120-51-4)0 %—31.12.2021ex29163990133,5-Dinitrobenzoic acid (CAS RN 99-34-3)0 %—31.12.2019ex29163990152-Chloro-5-nitrobenzoic acid (CAS RN 2516-96-3)0 %—31.12.2021ex29163990182,4-Dichlorophenylacetic acid (CAS RN 19719-28-9)0 %—31.12.2019ex29163990203,5-Dichlorobenzoyl chloride (CAS RN 2905-62-6)0 %—31.12.2023ex2916399023(2,4,6-Trimethylphenyl)acetyl chloride (CAS RN 52629-46-6)0 %—31.12.2019

ex29163990252-Methyl-3-(4-Fluorophenyl)-propionyl chloride (CAS RN 1017183-70-8)0 %—31.12.2021ex29163990302,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1)0 %—31.12.2020ex2916399033Methyl 4′-(bromomethyl)biphenyl-2-carboxylate (CAS RN 114772-38-2)0 %—31.12.2021ex2916399035Methyl 4-tert-butylbenzoate (CAS RN 26537-19-9)0 %—31.12.2023ex29163990414-Bromo-2,6-difluorobenzoyl chloride (CAS RN 497181-19-8)0 %—31.12.2020ex29163990483-Fluorobenzoyl chloride (CAS RN 1711-07-5)0 %—31.12.2023ex29163990503,5-Dimethylbenzoyl chloride (CAS RN 6613-44-1)0 %—31.12.2023ex29163990513-Chloro-2-fluorobenzoic acid (CAS RN 161957-55-7)0 %—31.12.2020ex29163990535-Iodo-2-methylbenzoic acid (CAS RN 54811-38-0)0 %—31.12.2020ex29163990554-tert-Butylbenzoic acid (CAS RN 98-73-7)0 %—31.12.2022ex29163990612-Phenylbutyric Acid (CAS RN 90-27-7)0 %—31.12.2020ex2916399070Ibuprofen (INN) (CAS RN 15687-27-1)0 %—31.12.2023ex2916399073(2,4-Dichlorophenyl)acetyl chloride (CAS RN 53056-20-5)0 %—31.12.2021ex2916399075m-Toluic acid (CAS RN 99-04-7)0 %—31.12.2022ex2916399085(2,4,5-Trifluorophenyl)acetic acid (CAS RN 209995-38-0)0 %—31.12.2022ex2917110020Bis(p-methylbenzyl) oxalate (CAS RN 18241-31-1)0 %—31.12.2023ex2917110030Cobalt oxalate (CAS RN 814-89-1)0 %—31.12.2019ex2917120020Bis(3,4-epoxycyclohexylmethyl) adipate (CAS RN 3130-19-6)0 %—31.12.2023ex2917191010Dimethyl malonate (CAS RN 108-59-8)0 %—31.12.2019ex2917191020Diethyl malonate (CAS RN 105-53-3)0 %—31.12.2022ex2917198015Dimethyl but-2-ynedioate (CAS RN 762-42-5)0 %—31.12.2023ex2917198030Ethylene brassylate (CAS RN 105-95-3)0 %—31.12.2019ex2917198035Diethyl methylmalonate (CAS RN 609-08-5)0 %—31.12.2023ex2917198050Tetradecanedioic acid (CAS RN 821-38-5)0 %—31.12.2020ex2917198070Itaconic acid (CAS RN 97-65-4)0 %—31.12.2023ex29172000301,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride (CAS RN 115-27-5)0 %—31.12.2023ex29172000403-Methyl-1,2,3,6-tetrahydrophthalic anhydride (CAS RN 5333-84-6)0 %—31.12.2023ex2917340010Diallyl phthalate (CAS RN 131-17-9)0 %—31.12.2023ex2917399520Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0)0 %—31.12.2020ex2917399525Naphthalene-1,8-dicarboxylic anhydride (CAS RN 81-84-5)0 %—31.12.2020ex2917399530Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7)0 %—31.12.2020ex29173995351-Methyl-2-nitroterephthalate (CAS RN 35092-89-8)0 %—31.12.2020 ex2917399540Dimethyl 2-nitroterephthalate (CAS RN 5292-45-5)0 %—31.12.2023ex29173995501,4,5,8-Naphthalenetetracarboxylic acid-1,8-monoanhydride (CAS RN 52671-72-4)0 %—31.12.2019ex2917399560Perylene-3,4:9,10-tetracarboxylic dianhydride(CAS RN 128-69-8)0 %—31.12.2019ex2918160020Calcium digluconate monohydrate (CAS RN 66905-23-5) for use in the manufacture of calcium gluconate lactate (CAS RN 11116-97-5)0 %—31.12.2019ex2918193010Cholic acid (CAS RN 81-25-4)0 %—31.12.2019ex29181930203-α,12-α-Dihydroxy-5-β-cholan-24-oic acid (deoxycholic acid) (CAS RN 83-44-3)0 %—31.12.2019ex2918199820L-Malic acid (CAS RN 97-67-6)0 %—31.12.2023ex2918290010Monohydroxynaphthoic acids0 %—31.12.2023ex2918290035Propyl 3,4,5-trihydroxybenzoate (CAS RN 121-79-9)0 %—31.12.2022ex2918290050Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] (CAS RN 35074-77-2)0 %—31.12.2023ex2918290060Methyl-, ethyl-, propyl- or butyl esters of 4-hydroxybenzoic acid or their sodium salts (CAS RN 35285-68-8, 99-76-3, 5026-62-0, 94-26-8, 94-13-3, 35285-69-9, 120-47-8, 36457-20-2 or 4247-02-3)0 %—31.12.2021ex29182900703,5-Diiodosalicylic acid (CAS RN 133-91-5)0 %—31.12.2019ex29183000152-fluoro-5-formylbenzoic acid (CAS RN 550363-85-4)0 %—31.12.2022ex2918300030Methyl-2-benzoylbenzoate (CAS RN 606-28-0)0 %—31.12.2023ex2918300050Ethyl acetoacetate (CAS RN 141-97-9)0 %—31.12.2022ex29183000604-Oxovaleric acid (CAS RN 123-76-2)0 %—31.12.2019ex29183000702-[4-Chloro-3-(chlorosulphonyl)benzoyl]benzoic acid (CAS RN 68592-12-1)0 %—31.12.2019ex2918300080Methyl benzoylformate (CAS RN 15206-55-0)0 %—31.12.2021ex29189990103,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate (CAS RN 2386-87-0)0 %—31.12.2023ex29189990133-Methoxy-2-methylbenzoyl chloride (CAS RN 24487-91-0)0 %—31.12.2020ex2918999015Ethyl 2,3-epoxy-3-phenylbutyrate (CAS RN 77-83-8)0 %—31.12.2022ex2918999018Ethyl 2-hydroxy-2-(4-phenoxyphenyl)propanoate (CAS RN 132584-17-9)0 %—31.12.2020ex2918999020Methyl 3-methoxyacrylate (CAS RN 5788-17-0)0 %—31.12.2019ex29189990231,8-Dihydroxyanthraquinone-3-carboxylic acid (CAS RN 478-43-3)0 %—31.12.2021ex2918999025Methyl (E)-3-methoxy-2-(2-chloromethylphenyl)-2-propenoate (CAS RN 117428-51-0)0 %—31.12.2023ex2918999027Ethyl 3-ethoxypropionate (CAS RN 763-69-9)0 %—31.12.2022ex2918999030Methyl 2-(4-hydroxyphenoxy)propionate (CAS RN 96562-58-2)0 %—31.12.2023

ex2918999035p-Anisic acid (CAS RN 100-09-4)0 %—31.12.2019ex2918999038Diclofop-methyl (ISO) (CAS RN 51338-27-3)0 %—31.12.2022ex2918999040trans-4-Hydroxy-3-methoxycinnamic acid (CAS RN 1135-24-6)0 %—31.12.2023ex29189990454-Methylcatechol dimethyl acetate (CAS RN 52589-39-6)0 %—31.12.2019ex2918999050Methyl 3,4,5-trimethoxybenzoate (CAS RN 1916-07-0)0 %—31.12.2023ex2918999055Stearyl glycyrrhetinate(CAS RN 13832-70-7)0 %—31.12.2019ex29189990603,4,5-Trimethoxybenzoic acid (CAS RN 118-41-2)0 %—31.12.2023ex2918999065Acetic acid, difluoro[1,1,2,2-tetrafluoro-2-(pentafluoroethoxy)ethoxy]-, ammonium salt (CAS RN 908020-52-0)0 %—31.12.2019ex2918999070Allyl-(3-methylbutoxy)acetate (CAS RN 67634-00-8)0 %—31.12.2019ex29189990753,4-Dimethoxybenzoic acid (CAS RN 93-07-2)0 %—31.12.2019ex2918999080Sodium 5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoate (CAS RN 62476-59-9)0 %—31.12.2021ex2918999085Trinexapac-Ethyl (ISO) (CAS RN 95266-40-3) with a purity by weight of 96 % or more0 %—31.12.2020ex29199000102,2′-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt (CAS RN 85209-91-2)0 %—31.12.2023ex2919900015Benzene-1,3-diyl tetraphenyl bis(phosphate) (CAS RN 57583-54-7)0 %—31.12.2023ex2919900030Aluminium hydroxybis[2,2′-methylenebis(4,6-di-tert-butylphenyl)phosphate] (CAS RN 151841-65-5)0 %—31.12.2023ex2919900040Tri-n-hexylphosphate (CAS RN 2528-39-4)0 %—31.12.2023ex2919900050Triethyl phosphate (CAS RN 78-40-0)0 %—31.12.2021ex2919900060Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)0 %—31.12.2023ex2919900070Tris(2-butoxyethyl)phosphate (CAS RN 78-51-3)0 %—31.12.2019ex2920190010Fenitrothion (ISO) (CAS RN 122-14-5)0 %—31.12.2023ex2920190020Tolclofos-methyl (ISO) (CAS RN 57018-04-9)0 %—31.12.2023ex29201900302,2′-Oxybis(5,5-dimethyl-1,3,2-dioxaphosphorinane)-2,2′-disulphide (CAS RN 4090-51-1)0 %—31.12.201929202300Trimethyl phosphite (CAS RN 121-45-9)0 %—31.12.202329202400Triethyl phosphite (CAS RN 122-52-1)0 %—31.12.2021ex2920290010O,O′-Dioctadecyl pentaerythritol bis(phosphite) (CAS RN 3806-34-6)0 %—31.12.2023ex2920290015Phosphorous acid 3,3′,5,5′-tetrakis(1,1-dimethylethyl)-6,6′-dimethyl[1,1′-biphenyl]-2,2′-diyl tetra-1-naphthalenyl ester (CAS RN 198979-98-5)0 %—31.12.2022ex2920290020Tris(methylphenyl)phosphite (CAS RN 25586-42-9)0 %—31.12.2020ex29202900302,2′-[[3,3′,5,5′-Tetrakis(1,1-dimethylethyl)[1,1′-biphenyl]-2,2′-diyl]bis(oxy)]bis[biphenyl-1,3,2-dioxaphosphepine], (CAS RN 138776-88-2)0 %—31.12.2020ex2920290040Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8)0 %—31.12.2020 ex2920290050Fosetyl-aluminium (CAS RN 39148-24-8)0 %—31.12.2023ex2920290060Fosetyl-sodium (CAS RN 39148-16-8) in form of an aqueous solution with a content by weight of fosetyl-sodium of 35 % or more but not more than 45 % for use in the manufacture of pesticides0 %—31.12.2021ex2920901010Diethyl sulphate (CAS RN 64-67-5)0 %—31.12.2023ex2920901015Ethyl methyl carbonate (CAS RN 623-53-0)0 %—31.12.2023ex2920901020Diallyl 2,2′-oxydiethyl dicarbonate (CAS RN 142-22-3)0 %—31.12.2023ex2920901025Diethyl carbonate (CAS RN 105-58-8)0 %—31.12.2023ex2920901035Vinylene carbonate (CAS RN 872-36-6)0 %—31.12.2023ex2920901040Dimethyl carbonate (CAS RN 616-38-6)0 %—31.12.2023ex2920901050Di-tert-butyl dicarbonate (CAS RN 24424-99-5)0 %—31.12.2023ex29209010602,4-Di-tert-butyl-5-nitrophenyl methyl carbonate (CAS RN 873055-55-1)0 %—31.12.2022ex2920901080Sodium 2-[2-(2-tridecoxyethoxy)ethoxy]ethyl sulphate (CAS RN 25446-78-0) in the form of a liquid paste with a content by weight in water of 62 % or more but not more than 65 %0 %—31.12.2021ex29209070302-isopropoxy-4,4,5,5-tetramethyl-1,3,2-dioxaborolane (CAS RN 61676-62-8)0 %—31.12.2023ex2920907060Bis(neopentylglycolato)diboron (CAS RN 201733-56-4)0 %—31.12.2023ex2920907080Bis(pinacolato)diboron (CAS RN 73183-34-3)0 %—31.12.2020292113002-(N,N-Diethylamino)ethyl chloride hydrochloride (CAS RN 869-24-9)0 %—31.12.2022

ex29211950 ex29299000 10 20 Diethylamino-triethoxysilane (CAS RN 35077-00-0)0 %—31.12.2019ex2921199920Ethyl(2-methylallyl)amine (CAS RN 18328-90-0)0 %—31.12.2023ex2921199925Dimethyl(tetradecyl)amine (CAS RN 112-75-4), containing by weight not more than 3 % of other dimethyl(alkyl) amines0 %—31.12.2023ex2921199930Allylamine (CAS RN 107-11-9)0 %—31.12.2023ex29211999452-Chloro-N-(2-chloroethyl)ethanamine hydrochloride (CAS RN 821-48-7)0 %—31.12.2021ex2921199970N,N-Dimethyloctylamine – boron trichloride (1:1) (CAS RN 34762-90-8)0 %—31.12.2022ex2921199980Taurine (CAS RN 107-35-7), with 0,5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)0 %—31.12.2019ex2921290020Tris[3-(dimethylamino)propyl]amine (CAS RN 33329-35-0)0 %—31.12.2023ex2921290030Bis[3-(dimethylamino)propyl]methylamine (CAS RN 3855-32-1)0 %—31.12.2023ex2921290040Decamethylenediamine (CAS RN 646-25-3)0 %—31.12.2020ex2921290050N′-[3-(Dimethylamino)propyl]-N,N-dimethylpropane-1,3-diamine, (CAS RN 6711-48-4)0 %—31.12.2021 ex29213010102-(4-(cyclopropanecarbonyl)phenyl)-2-methylpropanoic acid cyclohexylamine salt (CAS RN 1690344-90-1)0 %—31.12.2023ex29213099301,3-Cyclohexanedimethanamine (CAS RN 2579-20-6)0 %—31.12.2020ex2921309940Cyclopropylamine (CAS RN 765-30-0)0 %—31.12.2022ex29214200154-Amino-3-nitrobenzenesulphonic acid (CAS RN 616-84-2)0 %—31.12.2019ex2921420025Sodium hydrogen 2-aminobenzene-1,4-disulphonate (CAS RN 24605-36-5)0 %—31.12.2023ex29214200332-Fluoroaniline (CAS RN 348-54-9)0 %—31.12.2020ex29214200352-Nitroaniline (CAS RN 88-74-4)0 %—31.12.2023ex2921420040Sodium sulphanilate (CAS RN 515-74-2), also in form of its mono- or dihydrates (CAS RN 12333-70-0 or 6106-22-5)0 %—31.12.2019ex29214200452,4,5-Trichloroaniline (CAS RN 636-30-6)0 %—31.12.2023ex29214200503-Aminobenzenesulfonic acid (CAS RN 121-47-1)0 %—31.12.2023ex29214200702-Aminobenzene-1,4-disulfonic acid (CAS RN 98-44-2)0 %—31.12.2019ex29214200804-Chloro-2-nitroaniline (CAS RN 89-63-4)0 %—31.12.2023ex29214200853,5-Dichloroaniline (CAS RN 626-43-7)0 %—31.12.2023ex29214200862,5-Dichloroaniline (CAS RN 95-82-9)0 %—31.12.2022ex2921420087N-Methylaniline (CAS RN 100-61-8)0 %—31.12.2022ex29214200883,4-Dichloroaniline-6-sulphonic acid (CAS RN 6331-96-0)0 %—31.12.2022ex29214300204-Amino-6-chlorotoluene-3-sulphonic acid (CAS RN 88-51-7)0 %—31.12.2023ex29214300303-Nitro-p-toluidine (CAS RN 119-32-4)0 %—31.12.2023ex29214300404-Aminotoluene-3-sulphonic acid (CAS RN 88-44-8)0 %—31.12.2019ex29214300504-Aminobenzotrifluoride (CAS RN 455-14-1)0 %—31.12.2020ex29214300603-Aminobenzotrifluoride (CAS RN 98-16-8)0 %—31.12.2020ex2921440020Diphenylamine (CAS RN 122-39-4)0 %—31.12.2023ex29214500202-Aminonaphthalene-1,5-disulphonic acid (CAS RN 117-62-4) or one of its sodium salts (CAS RN 19532-03-7) or (CAS RN 62203-79-6)0 %—31.12.2019ex29214500507-Aminonaphthalene-1,3,6-trisulphonic acid (CAS RN 118-03-6)0 %—31.12.2019ex29214500601-Naphthylamine (CAS RN 134-32-7)0 %—31.12.2022ex29214500708-Aminonaphthalene-2-sulphonic acid (CAS RN 119-28-8)0 %—31.12.2022ex2921490020Pendimethalin (ISO) (CAS RN 40487-42-1)3.5 %—31.12.2023ex2921490040N-1-Naphthylaniline (CAS RN 90-30-2)0 %—31.12.2023ex29214900602,6-Diisopropylaniline (CAS RN 24544-04-5)0 %—31.12.2020ex29214900804-Heptafluoroisopropyl-2-methylaniline (CAS RN 238098-26-5)0 %—31.12.2020ex29215119302-Methyl-p-phenylenediamine sulphate (CAS RN 615-50-9)0 %—31.12.2023ex2921511940p-Phenylenediamine (CAS RN 106-50-3)0 %—31.12.2021

ex2921511950Mono- and dichloroderivatives of p-phenylenediamine and p-diaminotoluene0 %—31.12.2019ex29215119602,4-Diaminobenzenesulphonic acid (CAS RN 88-63-1)0 %—31.12.2019ex29215119704-Bromo- 1,2-diaminobenzene (CAS RN 1575-37-7)0 %—31.12.2020ex2921599010Mixture of isomers of 3,5-diethyltoluenediamine (CAS RN 68479-98-1, CAS RN 75389-89-8)0 %—31.12.2023ex29215990303,3′-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9)0 %—31.12.2022ex29215990404,4′-Diaminostilbene-2,2′-disulphonic acid (CAS RN 81-11-8)0 %—31.12.2023ex2921599060(2R,5R)-1,6-Diphenylhexane-2,5-diamine dihydrochloride (CAS RN 1247119-31-8)0 %—31.12.2022ex2921599070Tris(4-aminophenyl)methane (CAS RN 548-61-8)0 %—31.12.2020ex29221900202-(2-Methoxyphenoxy)ethylamine hydrochloride (CAS RN 64464-07-9)0 %—31.12.2022ex2922190030N,N,N′,N′-Tetramethyl-2,2′-oxybis(ethylamine) (CAS RN 3033-62-3)0 %—31.12.2023ex29221900352-[2-(Dimethylamino)ethoxy] ethanol (CAS RN 1704-62-7)0 %—31.12.2020ex2922190040(R)-1-((4-amino-2-bromo-5-fluorophenyl)amino)-3-(benzyloxy)propan-2-ol 4-methylbenzenesulphonate (CAS RN 1294504-64-5)0 %—31.12.2021ex29221900452-Methoxymethyl-p-phenylenediamine (CAS RN 337906-36-2)0 %—31.12.2023ex29221900502-(2-Methoxyphenoxy)ethylamine (CAS RN 1836-62-0)0 %—31.12.2019ex2922190060N,N,N′-trimethyl-N′-(2-hydroxy-ethyl) 2,2′-oxybis(ethylamine), (CAS RN 83016-70-0)0 %—31.12.2023ex2922190065trans-4-Aminocyclohexanol (CAS RN 27489-62-9)0 %—31.12.2023ex29221900752-Ethoxyethylamine (CAS RN 110-76-9)0 %—31.12.2023ex2922190080N-[2-[2-(Dimethylamino)ethoxy]ethyl]-N-methyl-1,3-propanediamine (CAS RN 189253-72-3)0 %—31.12.2019ex2922190085(1S,4R)-cis-4-Amino-2-cyclopentene-1-methanol-D-tartrate (CAS RN 229177-52-0)0 %—31.12.2023ex29222100102-Amino-5-hydroxynaphthalene-1,7-disulphonic acid (CAS RN 6535-70-2)0 %—31.12.2019ex29222100306-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 90-51-7)0 %—31.12.2019ex29222100407-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 87-02-5)0 %—31.12.2023ex2922210050Sodium hydrogen 4-amino-5-hydroxynaphthalene-2,7-disulphonate (CAS RN 5460-09-3)0 %—31.12.2019ex29222100604-Amino-5-hydroxynaphthalene-2,7-disulphonic acid with a purity by weight of 80 % or more (CAS RN 90-20-0)0 %—31.12.2023ex29222900203-Aminophenol (CAS RN 591-27-5)0 %—31.12.2023ex29222900255-Amino-o-cresol (CAS RN 2835-95-2)0 %—31.12.2023 ex29222900301,2-Bis(2-aminophenoxy)ethane (CAS RN 52411-34-4)0 %—31.12.2020ex29222900404-Hydroxy-6-[(3-sulphophenyl)amino]naphthalene-2-sulphonic acid (CAS RN 25251-42-7)0 %—31.12.2020ex2922290045Anisidines0 %—31.12.2023ex2922290063Aclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97 % or more0 %—31.12.2020ex29222900654-Trifluoromethoxyaniline (CAS RN 461-82-5)0 %—31.12.2019ex29222900674-Chloro-2,5-dimethoxyaniline (CAS RN 6358-64-1)0 %—31.12.2023ex29222900704-Nitro-o-anisidine (CAS RN 97-52-9)0 %—31.12.2023ex2922290073Tris(4-aminophenyl) thiophosphate (CAS RN 52664-35-4)0 %—31.12.2021ex29222900754-(2-Aminoethyl)phenol (CAS RN 51-67-2)0 %—31.12.2020ex29222900803-Diethylaminophenol (CAS RN 91-68-9)0 %—31.12.2023ex29222900854-Benzyloxyaniline hydrochloride (CAS RN 51388-20-6)0 %—31.12.2023ex29223900101-Amino-4-bromo-9,10-dioxoanthracene-2-sulphonic acid and its salts0 %—31.12.2023ex29223900152-Amino-3,5-dibromobenzaldehyde (CAS RN 50910-55-9)0 %—31.12.2022ex29223900202-Amino-5-chlorobenzophenone (CAS RN 719-59-5)0 %—31.12.2020ex29223900253-(Dimethylamino)-1-(1-naphthalenyl)-1-propanone)hydrochloride (CAS RN 5409-58-5)0 %—31.12.2020ex29223900355-Chloro-2-(methylamino)benzophenone (CAS RN 1022-13-5)0 %—31.12.2020ex2922430010Anthranilic acid (CAS RN 118-92-3)0 %—31.12.2023ex2922498510Ornithine aspartate (INNM) (CAS RN 3230-94-2)0 %—31.12.2023ex29224985203-Amino-4-chlorobenzoic acid (CAS RN 2840-28-0)0 %—31.12.2022ex2922498525Dimethyl 2-aminobenzene-1,4-dicarboxylate (CAS RN 5372-81-6)0 %—31.12.2019ex2922498530Aqueous solution containing 40 % by weight or more of sodium methylaminoacetate (CAS RN 4316-73-8)0 %—31.12.2020ex29224985352-(3-Amino-4-chloro-benzoyl) benzoic acid (CAS RN 118-04-7)0 %—31.12.2021ex2922498540Norvaline0 %—31.12.2023ex2922498545Glycine (CAS RN 56-40-6)0 %—31.12.2020ex2922498550D-(-)-Dihydrophenylglycine (CAS RN 26774-88-9)0 %—31.12.2019ex2922498555(E)-Ethyl 4-(dimethylamino)but-2-enoate maleate (CUS 0138070-7)0 %—31.12.2019ex2922498560Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3)0 %—31.12.2022ex2922498565Diethyl aminomalonate hydrochloride (CAS RN 13433-00-6)0 %—31.12.2020ex29224985702-Ethylhexyl-4-dimethylaminobenzoate (CAS RN 21245-02-3)0 %—31.12.2023ex2922498575L-alanine isopropyl ester hydrochloride (CAS RN 62062-65-1)0 %—31.12.2022

ex292249858012-Aminododecanoic acid (CAS RN 693-57-2)0 %—31.12.2023ex29225000102-(2-(2-Aminoethoxy)ethoxy)acetic acid hydrochloride (CAS RN 134979-01-4)0 %—31.12.2021ex29225000153,5-Diiodothyronine (CAS RN 1041-01-6)0 %—31.12.2022ex29225000201-[2-Amino-1-(4-methoxyphenyl)-ethyl]-cyclohexanol hydrochloride (CAS RN 130198-05-9)0 %—31.12.2019ex2922500035(2S)-2-Amino-3-(3,4-dimethoxyphenyl)-2-methylpropanoic acid hydrochloride (CAS RN 5486-79-3)0 %—31.12.2023ex29225000702-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium acetate0 %—31.12.2023ex2923100010Calcium phosphoryl choline chloride tetrahydrate (CAS RN 72556-74-2)0 %—31.12.2019ex2923900010Tetramethylammonium hydroxide, in the form of an aqueous solution containing 25 % (± 0,5 %) by weight of tetramethylammonium hydroxide0 %—31.12.2023ex2923900020Tetramethylammonium hydrogen phthalate (CAS RN 79723-02-7)0 %—31.12.2019ex2923900025Tetrakis(dimethylditetradecylammonium) molybdate, (CAS RN 117342-25-3)0 %—31.12.2023ex2923900055Tetrabutylammonium bromide (CAS RN 1643-19-2)0 %—31.12.2021ex2923900070 Tetrapropylammonium hydroxide, in the form of an aqueous solution containing: 40 % (± 2 %) by weight of tetrapropylammonium hydroxide, 0,3 % by weight or less of carbonate, 0,1 % by weight or less of tripropylamine, 500 mg/kg or less of bromide, and 25 mg/kg or less of potassium and sodium taken together 0 %—31.12.2023ex2923900075 Tetraethylammonium hydroxide, in the form of an aqueous solution containing: 35 % (± 0,5 %) by weight of tetraethylammonium hydroxide, not more than 1000 mg/kg of chloride, not more than 2 mg/kg of iron, and not more than 10 mg/kg of potassium 0 %—31.12.2020ex2923900080Diallyldimethylammonium chloride (CAS RN 7398-69-8), in the form of an aqueous solution containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride0 %—31.12.2023ex2923900085N,N,N-Trimethylanilinium chloride (CAS RN 138-24-9)0 %—31.12.2019ex29241900102-Acrylamido-2-methylpropanesulphonic acid (CAS RN 15214-89-8) or its sodium salt (CAS RN 5165-97-9), or its ammonium salt (CAS RN 58374-69-9)0 %—31.12.2023ex2924190015N-Ethyl N-methylcarbamoyl chloride (CAS RN 42252-34-6)0 %—31.12.2019 ex2924190020(R)-(-)-3-(carbamoylmethyl)-5-methylhexanoic acid (CAS RN 181289-33-8)0 %—31.12.2020ex2924190025Isobutylidenediurea (CAS RN 6104-30-9)0 %—31.12.2022ex2924190030Methyl 2-acetamido-3-chloropropionate (CAS RN 87333-22-0)0 %—31.12.2023ex2924190035Acetamide (CAS RN 60-35-5)0 %—31.12.2019ex29241900453-Chloro-N-methoxy-N-methylpropanamide (CAS RN 1062512-53-1)0 %—31.12.2021ex2924190050Acrylamide (CAS RN 79-06-1)0 %—31.12.2023ex29241900552-Propynyl butylcarbamate (CAS RN 76114-73-3)0 %—31.12.2021ex2924190060N,N-Dimethylacrylamide (CAS RN 2680-03-7)0 %—31.12.2021ex29241900652,2,2-trifluoroacetamide (CAS RN 354-38-1)0 %—31.12.2023ex2924190070Methylcarbamate (CAS RN 598-55-0)0 %—31.12.2023ex2924190080Tetrabutylurea (CAS RN 4559-86-8)0 %—31.12.2022ex29242100104,4′-Dihydroxy-7,7′-ureylenedi(naphthalene-2-sulfonic acid) and its sodium salts0 %—31.12.2023ex2924210020(3-Aminophenyl)urea hydrochloride (CAS RN 59690-88-9)0 %—31.12.201929242500Alachlor (ISO), (CAS RN 15972-60-8)0 %—31.12.2023ex29242970124-(Acetylamino)-2-aminobenzenesulphonic acid (CAS RN 88-64-2)0 %—31.12.2019ex2924297015Acetochlor (ISO), (CAS RN 34256-82-1)0 %—31.12.2023ex29242970172-(Trifluoromethyl)benzamide (CAS RN 360-64-5)0 %—31.12.2019ex29242970192-[[2-(Benzyloxycarbonylamino)acetyl]amino]propionic acid (CAS RN 3079-63-8)0 %—31.12.2019ex29242970202-Chloro-N-(2-ethyl-6-methylphenyl)-N-(propan-2-yloxymethyl)acetamide (CAS RN 86763-47-5)0 %—31.12.2019ex2924297023Benalaxyl-M (ISO) (CAS RN 98243-83-5)0 %—31.12.2019ex29242970272-Bromo-4-fluoroacetanilide (CAS RN 1009-22-9)0 %—31.12.2021ex2924297030Sodium 4-(4-methyl-3-nitrobenzoylamino)benzenesulphonate (CAS RN 84029-45-8)0 %—31.12.2021ex2924297033N-(4-Amino-2-ethoxyphenyl)acetamide (CAS RN 848655-78-7)0 %—31.12.2019ex2924297037Beflubutamid (ISO) (CAS RN 113614-08-7)0 %—31.12.2023ex2924297040N,N′-1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5)0 %—31.12.2020ex2924297045Propoxur (ISO) (CAS RN 114-26-1)0 %—31.12.2020ex2924297050N-Benzyloxycarbonyl-L-tert-leucine isopropylamine salt (CAS RN 1621085-33-3)0 %—31.12.2021ex29242970534-Amino-N-[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8)0 %—31.12.2022ex2924297055N,N′-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 24304-50-5)0 %—31.12.2020

ex2924297060N,N′-(2-Chloro-5-methyl-1,4-phenylene)bis[3-oxobutyramide], (CAS RN 41131-65-1)0 %—31.12.2020ex2924297061(S)-1-Phenylethanamine (S)-2-(((1R,2R)-2-allylcyclopropoxy)carbonylamino)-3,3-dimethylbutanoate (CUS 0143288-8)0 %—31.12.2020ex29242970622-Chlorobenzamide (CAS RN 609-66-5)0 %—31.12.2020ex2924297063N-Ethyl-2-(isopropyl)-5-methylcyclohexanecarboxamide (CAS RN 39711-79-0)0 %—31.12.2021ex2924297064N-(3′,4′-dichloro-5-fluoro[1,1′-biphenyl]-2-yl)acetamide (CAS RN 877179-03-8)0 %—31.12.2020ex2924297073Napropamide (ISO) (CAS RN 15299-99-7)0 %—31.12.2019ex29242970753-Amino-p-anisanilide (CAS RN 120-35-4)0 %—31.12.2023ex2924297085p-Aminobenzamide (CAS RN 2835-68-9)0 %—31.12.2023ex2924297086Anthranilamide (CAS RN 88-68-6) of a purity by weight of 99,5 % or more0 %—31.12.2022ex29242970885′-Chloro-3-hydroxy-2′-methyl-2-naphthanilide (CAS RN 135-63-7)0 %—31.12.2023ex2924297089Flutolanil (ISO) (CAS RN 66332-96-5)0 %—31.12.2023ex29242970913-Hydroxy-2′-methoxy-2-naphthanilide (CAS RN 135-62-6)0 %—31.12.2023ex29242970923-Hydroxy-2-naphthanilide (CAS RN 92-77-3)0 %—31.12.2019ex29242970933-Hydroxy-2′-methyl-2-naphthanilide (CAS RN 135-61-5)0 %—31.12.2023ex29242970942′-Ethoxy-3-hydroxy-2-naphthanilide (CAS RN 92-74-0)0 %—31.12.2023ex29242970971,1-Cyclohexanediacetic acid monoamide (CAS RN 99189-60-3)0 %—31.12.2023ex2925110020Saccharin and its sodium salt0 %—31.12.2023ex2925199510N-Phenylmaleimide (CAS RN 941-69-5)0 %—31.12.2023ex29251995204,5,6,7-Tetrahydroisoindole-1,3-dione (CAS RN 4720-86-9)0 %—31.12.2022ex2925199530N,N′-(m-Phenylene)dimaleimide (CAS RN 3006-93-7)0 %—31.12.2022ex2925290010Dicyclohexylcarbodiimide (CAS RN 538-75-0)0 %—31.12.2023ex2925290020N-[3-(Dimethylamino)propyl]-N′-ethylcarbodiimide hydrochloride (CAS RN 25952-53-8)0 %—31.12.2023ex2925290030Guanidine sulphamate (CAS RN 50979-18-5)0 %—31.12.2020ex2926907012Cyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95 % or more0 %—31.12.2019ex2926907013alpha-Bromo-o-toluonitrile (CAS RN 22115-41-9)0 %—31.12.2019ex2926907014Cyanoacetic acid (CAS RN 372-09-8)0 %—31.12.2020ex29269070152-Cyclohexylidene-2-phenylacetonitrile (CAS RN 10461-98-0)0 %—31.12.2022ex29269070164-Cyano-2-nitrobenzoic acid methyl ester (CAS RN 52449-76-0)0 %—31.12.2019 ex2926907017Cypermethrin (ISO) with its stereoisomers (CAS RN 52315-07-8) with a purity by weight of 90 % or more0 %—31.12.2020ex2926907018Flumethrin (ISO) (CAS RN 69770-45-2)0 %—31.12.2022ex29269070192-(4-amino-2-chloro-5-methylphenyl)-2-(4-chlorophenyl) acetonitrile (CAS RN 61437-85-2)0 %—31.12.2023ex29269070202-(m-Benzoylphenyl)propiononitrile (CAS RN 42872-30-0)0 %—31.12.2019ex29269070214-Bromo-2-chlorobenzonitrile (CAS RN 154607-01-9)0 %—31.12.2023ex2926907022Acetonitrile (CAS RN 75-05-8)0 %—31.12.2023ex2926907023Acrinathrin (ISO) (CAS RN 101007-06-1)0 %—31.12.2023ex29269070252,2-Dibromo-3-nitrilopropionamide (CAS RN 10222-01-2)0 %—31.12.2021ex2926907027Cyhalofop-butyl (ISO) (CAS RN 122008-85-9)0 %—31.12.2023ex29269070304,5-Dichloro-3,6-dioxocyclohexa-1,4-diene-1,2-dicarbonitrile (CAS RN 84-58-2)0 %—31.12.2021ex2926907033Deltamethrin (ISO) (CAS RN 52918-63-5)0 %—31.12.2022ex29269070354-Cyano-2-methoxybenzaldehyde (CAS RN 21962-45-8)0 %—31.12.2021ex29269070402-(4-Cyanophenylamino)acetic acid (CAS RN 42288-26-6)0 %—31.12.2021ex2926907050Alkyl or alkoxyalkyl esters of cyanoacetic acid0 %—31.12.2023ex2926907061m-(1-Cyanoethyl)benzoic acid (CAS RN 5537-71-3)0 %—31.12.2021ex2926907064Esfenvalerate (CAS RN 66230-04-4) of a purity by weight of 83 % or more in a mixture of its own isomers0 %—31.12.2019ex2926907070Methacrylonitrile (CAS RN 126-98-7)0 %—31.12.2019ex2926907074Chlorothalonil (ISO) (CAS RN 1897-45-6)0 %—31.12.2019ex2926907075Ethyl 2-cyano-2-ethyl-3-methylhexanoate (CAS RN 100453-11-0)0 %—31.12.2019ex2926907080Ethyl 2-cyano-2-phenylbutyrate (CAS RN 718-71-8)0 %—31.12.2023ex2926907086Ethylenediaminetetraacetonitrile (CAS RN 5766-67-6)0 %—31.12.2023ex2926907089Butyronitrile (CAS RN 109-74-0)0 %—31.12.2023ex29270000102,2′-Dimethyl-2,2′-azodipropionamidine dihydrochloride0 %—31.12.2023ex29270000204-Anilino-2-methoxybenzenediazonium hydrogen sulphate (CAS RN 36305-05-2)0 %—31.12.2023ex29270000252,2′-azobis(4-methoxy-2,4-dimethylvaleronitrile) (CAS RN 15545-97-8)0 %—31.12.2022ex29270000304′-Aminoazobenzene-4-sulphonic acid (CAS RN 104-23-4)0 %—31.12.2023ex2927000035C.C′-Azodi(formamide) (CAS RN 123-77-3) in the form of yellow powder with a decomposition temperature of 180 °C or more but not more than 220 °C used as a foaming agent in the manufacture of thermoplastic resins, elastomer and cross-linked polythene foam0 %—31.12.2019ex29270000604,4′-Dicyano-4,4′-azodivaleric acid (CAS RN 2638-94-0)0 %—31.12.2023

ex29270000804-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic acid (CAS RN 51867-77-7)0 %—31.12.2022ex29280090103,3′-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N′-bipropionamide (CAS RN 32687-78-8)0 %—31.12.2023ex2928009013Cymoxanil (ISO) (CAS RN 57966-95-7)0 %—31.12.2019ex2928009018Acetone oxime (CAS RN 127-06-0) of a purity by weight of 99 % or more0 %—31.12.2019ex2928009023Metobromuron (ISO) (CAS RN 3060-89-7) with a purity by weight of 98 % or more0 %—31.12.2020ex2928009025Acetaldehyde oxime (CAS RN 107-29-9) in an aqueous solution0 %—31.12.2020ex2928009028Pentan-2-one oxime (CAS RN 623-40-5)0 %—31.12.2021ex2928009030N-Isopropylhydroxylamine (CAS RN 5080-22-8)0 %—31.12.2021ex29280090334-Chlorophenylhydrazine Hydrochloride (CAS RN 1073-70-7)0 %—31.12.2023ex2928009040O-Ethylhydroxylamine, in the form of an aqueous solution (CAS RN 624-86-2)0 %—31.12.2023ex2928009045Tebufenozide (ISO) (CAS RN 112410-23-8)0 %—31.12.2023ex2928009050Aqueous solution of 2,2′-(hydroxyimino) bisethanesulphonic acid disodium salt (CAS RN 133986-51-3) with a content by weight of more than 33,5 % but not more than 36,5 %0 %—31.12.2020ex2928009055Aminoguanidinium hydrogen carbonate (CAS RN 2582-30-1)0 %—31.12.2023ex29280090652-Amino-3-(4-hydroxyphenyl) propanal semicarbazone hydrochloride0 %—31.12.2019ex2928009070Butanone oxime (CAS RN 96-29-7)0 %—31.12.2023ex2928009075Metaflumizone (ISO) (CAS RN 139968-49-3)0 %—31.12.2021ex2928009080Cyflufenamid (ISO) (CAS RN 180409-60-3)0 %—31.12.2023ex2928009085Daminozide (ISO) with a purity by weight of 99 % or more (CAS RN 1596-84-5)0 %—31.12.2021ex29291000153,3′-Dimethylbiphenyl-4,4′-diyl diisocyanate (CAS RN 91-97-4)0 %—31.12.2019ex2929100020Butyl isocyanate (CAS RN 111-36-4)0 %—31.12.2022ex2929100040m-Isopropenyl-α,α-dimethylbenzyl isocyanate (CAS RN 2094-99-7)0 %—31.12.2023ex2929100050m-Phenylenediisopropylidene diisocyanate (CAS RN 2778-42-9)0 %—31.12.2023ex29291000552,5 (and 2,6)-Bis(isocyanatomethyl)bicyclo[2.2.1]heptane (CAS RN 74091-64-8)0 %—31.12.2022ex2929100060Trimethylhexamethylene diisocyanate, mixed isomers0 %—31.12.2023ex29291000801,3-Bis(isocyanatomethyl)benzene (CAS RN 3634-83-1)0 %—31.12.2022ex2930200010Prosulfocarb (ISO) (CAS RN 52888-80-9)0 %—31.12.2022ex29302000202-Isopropylethylthiocarbamate (CAS RN 141-98-0)0 %—31.12.2021 ex29309098102,3-Bis((2-mercaptoethyl)thio)-1-propanethiol (CAS RN 131538-00-6)0 %—31.12.2020ex29309098124,4′-Sulfonyldiphenol (CAS RN 80-09-1) used in the manufacture of polyarylsulfones or polyarylethersulfones0 %—31.12.2023ex2930909813Mercaptamine hydrochloride (CAS RN 156-57-0)0 %—31.12.2021ex2930909815Ethoprophos (ISO) (CAS RN 13194-48-4)0 %—31.12.2023ex29309098163-(Dimethoxymethylsilyl)-1-propanethiol (CAS RN 31001-77-1)0 %—31.12.2019ex29309098172-(3-Aminophenylsulphonyl)ethyl hydrogen sulphate (CAS RN 2494-88-4)0 %—31.12.2019ex2930909819N-(2-Methylsulfinyl-1,1-dimethyl-ethyl)-N′-{2-methyl-4-[1,2,2,2-tetrafluoro-1-(trifluoromethyl)ethyl]phenyl}phthalamide (CAS RN 371771-07-2)0 %—31.12.2020ex2930909821[2,2′-Thio-bis(4-tert-octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3)0 %—31.12.2021ex2930909822Tembotrione (ISO) (CAS RN 335104-84-2) with a purity by weight of 94,5 % or more0 %—31.12.2020ex2930909823Dimethyl [(methylsulphanyl)methylylidene]biscarbamate (CAS RN 34840-23-8)0 %—31.12.2023ex2930909825Thiophanate-methyl (ISO), (CAS RN 23564-05-8)0 %—31.12.2023ex2930909826Folpet (ISO)(CAS RN 133-07-3) with a purity by weight of 97,5 % or more0 %—31.12.2020ex29309098272-[(4-Amino-3-methoxyphenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 26672-22-0)0 %—31.12.2019ex29309098304-(4-Isopropoxyphenylsulphonyl)phenol (CAS RN 95235-30-6)0 %—31.12.2023ex29309098332-Amino-5-{[2-(sulfooxy)ethyl]sulfonyl}benzenesulfonIc acid (CAS RN 42986-22-1)0 %—31.12.2019ex2930909835Glutathione (CAS RN 70-18-8)0 %—31.12.2021ex29309098403,3′-Thiodi(propionic acid) (CAS RN 111-17-1)0 %—31.12.2023ex2930909843Trimethylsulfoxonium iodide (CAS RN 1774-47-6)0 %—31.12.2023ex29309098452-[(p-Aminophenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 2494-89-5)0 %—31.12.2019ex2930909853Bis(4-chlorophenyl) sulphone (CAS RN 80-07-9)0 %—31.12.2020ex2930909855Thiourea (CAS RN 62-56-6)0 %—31.12.2020ex2930909857Methyl (methylthio)acetate (CAS RN 16630-66-3)0 %—31.12.2020ex2930909860Methyl phenyl sulphide (CAS RN 100-68-5)0 %—31.12.2023ex29309098643-Chloro-2-methylphenyl methyl sulphide (CAS RN 82961-52-2)0 %—31.12.2019ex2930909865Pentaerythritol tetrakis(3-mercaptopropionate) (CAS RN 7575-23-7)0 %—31.12.2022ex2930909868Clethodim (ISO) (CAS RN 99129-21-2)0 %—31.12.2022

ex29309098774-[4-(2-Propenyloxy)phenylsulphonyl]phenol (CAS RN 97042-18-7)0 %—31.12.2023ex29309098784-Mercaptomethyl-3,6-dithia-1,8-octanedithiol (CAS RN 131538-00-6)0 %—31.12.2021ex2930909880Captan (ISO) (CAS RN 133-06-2)0 %—31.12.2023ex2930909881Disodium hexamethylene-1,6-bisthiosulfate dihydrate (CAS RN 5719-73-3)3 %—31.12.2019ex29309098852-Methyl-1-(methylthio)-2-propanamine (CAS RN 36567-04-1)0 %—31.12.2021ex2930909889Potassium- or sodium-salt of O-ethyl-, O-isopropyl-, O-butyl-, O-isobutyl- or O-pentyl-dithiocarbonates0 %—31.12.2021ex29309098931-Hydrazino-3-(methylthio)propan-2-ol (CAS RN 14359-97-8)0 %—31.12.2021ex2930909895N-(cyclohexylthio)phthalimide (CAS RN 17796-82-6)0 %—31.12.2021ex2930909897Diphenyl sulphone (CAS RN 127-63-9)0 %—31.12.2021ex2931399008Sodium diisobutyldithiophosphinate (CAS RN 13360-78-6) in an aqueous solution0 %—31.12.2022ex2931399013Trioctylphosphine oxide (CAS RN 78-50-2)0 %—31.12.2021ex2931399023Di-tert-butylphosphane (CAS RN 819-19-2)0 %—31.12.2023ex2931399025(Z)-Prop-1-en-1-ylphosphonic acid (CAS RN 25383-06-6)0 %—31.12.2022ex2931399028N-(Phosphonomethyl)iminodiacetic acid (CAS RN 5994-61-6)0 %—31.12.2019ex2931399030Bis(2,4,4-trimethylpentyl)phosphinic acid (CAS RN 83411-71-6)0 %—31.12.2023ex2931399035Ethyl phenyl(2,4,6-trimethylbenzoyl)phosphinate (CAS RN 84434-11-7)0 %—31.12.2023ex2931399040Tetrakis(hydroxymethyl)phosphonium chloride (CAS RN 124-64-1)0 %—31.12.2021ex2931399045Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (CAS RN 75980-60-8)0 %—31.12.2023ex2931399048Tetrabutylphosphonium acetate in the form of an aqueous solution (CAS RN 30345-49-4)0 %—31.12.2019ex29313990553-(Hydroxyphenylphosphinoyl)propionic acid (CAS RN 14657-64-8)0 %—31.12.2023ex2931399057Trimethyl phosphonoacetate (CAS RN 5927-18-4)0 %—31.12.2020ex2931900003Butylethylmagnesium (CAS RN 62202-86-2), in the form of a solution in heptane0 %—31.12.2023ex2931900005Diethylmethoxyborane (CAS RN 7397-46-8), whether or not in the form of a solution in tetrahydrofuran according to note 1e to Chapter 29 of the CN0 %—31.12.2020ex2931900010(3-fluoro-5-isobutoxyphenyl)boronic acid (CAS RN 850589-57-0)0 %—31.12.2022ex2931900015Methylcyclopentadienyl manganese tricarbonyl (CAS RN 12108-13-3) containing not more than 4,9 % by weight of cyclopentadienyl manganese tricarbonyl0 %—31.12.2019 ex2931900018Methyl tris (2-pentanoneoxime) silane (CAS RN 37859-55-5)0 %—31.12.2019ex2931900020Ferrocene (CAS RN 102-54-5)0 %—31.12.2022ex2931900033Dimethyl[dimethylsilyldiindenyl]hafnium (CAS RN 220492-55-7)0 %—31.12.2019ex2931900035N,N-Dimethylanilinium tetrakis(pentafluorophenyl)borate (CAS RN 118612-00-3)0 %—31.12.2019ex2931900050Trimethylsilane (CAS RN 993-07-7)0 %—31.12.2021ex2931900053Trimethylborane (CAS RN 593-90-8)0 %—31.12.2019ex29319000604-Chloro-2-fluoro-3-methoxyphenylboronic acid (CAS RN 944129-07-1)0 %—31.12.2020ex2931900063Chloroethenyldimethylsilane (CAS RN 1719-58-0)0 %—31.12.2020ex2931900065Bis(4-tert-butylphenyl)iodonium hexafluorophosphate (CAS RN 61358-25-6)0 %—31.12.2020ex2931900067Dimethyltin dioleate (CAS RN 3865-34-7)0 %—31.12.2020ex2931900070(4-Propylphenyl)boronic acid (CAS RN 134150-01-9)0 %—31.12.2020ex2932130010Tetrahydrofurfuryl alcohol (CAS RN 97-99-4)0 %—31.12.2023ex29321400101,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4 deoxy-α-D-galactopyranoside (CAS RN 56038-13-2)0 %—31.12.2019ex2932190020Tetrahydrofuran-borane (CAS RN 14044-65-6)0 %—31.12.2020ex2932190040Furan (CAS RN 110-00-9) of a purity by weight of 99 % or more0 %—31.12.2019ex29321900412,2 Di(tetrahydrofuryl)propane (CAS RN 89686-69-1)0 %—31.12.2019ex2932190070Furfurylamine (CAS RN 617-89-0)0 %—31.12.2019ex2932190075Tetrahydro-2-methylfuran (CAS RN 96-47-9)0 %—31.12.2023ex29321900805-Nitrofurfurylidene di(acetate) (CAS RN 92-55-7)0 %—31.12.2021ex29322090102′-Anilino-6′-[ethyl(isopentyl)amino]-3′-methylspiro[isobenzofuran-1(3H),9′-xanthen]-3-one (CAS RN 70516-41-5)0 %—31.12.2023ex2932209015Coumarin (CAS RN 91-64-5)0 %—31.12.2021ex2932209040(S)-(–)-α-Amino-γ-butyrolactone hydrobromide (CAS RN 15295-77-9)0 %—31.12.2022ex29322090452,2-Dimethyl-1,3-dioxane-4,6-dione (CAS RN 2033-24-1)0 %—31.12.2023ex2932209050L-Lactide (CAS RN 4511-42-6) or D-Lactide (CAS RN 13076-17-0) or dilactide (CAS RN 95-96-5)0 %—31.12.2022ex29322090556-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide (CAS RN 1552-42-7)0 %—31.12.2023ex29322090606′-(Diethylamino)-3′-methyl-2′-(phenylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one (CAS RN 29512-49-0)0 %—31.12.2021ex2932209065Sodium 4-(methoxycarbonyl)-5-oxo-2,5-dihydrofuran-3-olate (CAS RN 1134960-41-0)0 %—31.12.2020

ex29322090716′-(Dibutylamino)-3′-methyl-2′-(phenylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one (CAS RN 89331-94-2)0 %—31.12.2021ex2932209080Gibberellic acid with a minimum purity by weight of 88 % (CAS RN 77-06-5)0 %—31.12.2023ex2932209084Decahydro-3a,6,6,9a-tetramethylnaphth [2,1-b] furan-2 (1H)-one (CAS RN 564-20-5)0 %—31.12.2023ex2932990010Bendiocarb (ISO) (CAS RN 22781-23-3)0 %—31.12.2023ex2932990013(4-Chloro-3-(4-ethoxybenzyl)phenyl)((3aS,5R,6S,6aS)-6-hydroxy 2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-5-yl)methanone (CAS RN 1103738-30-2)0 %—31.12.2021ex29329900151,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylindeno[5,6-c]pyran (CAS RN 1222-05-5)0 %—31.12.2021ex29329900184-(4-Bromo-3-((tetrahydro-2H-pyran-2-yloxy)methyl)phenoxy)benzonitrile (CAS RN 943311-78-2)0 %—31.12.2021ex2932990020Ethyl-2-methyl-1,3-dioxolane-2-acetate (CAS RN 6413-10-1)0 %—31.12.2021ex29329900232-ethyl-3-hydroxy-4-pyrone (CAS RN 4940-11-8)0 %—31.12.2022ex29329900251-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic acid (CAS RN 862574-88-7)0 %—31.12.2022ex29329900333-hydroxy-2-methyl-4-pyrone (CAS RN 118-71-8)0 %—31.12.2023ex2932990043Ethofumesate (ISO) (CAS RN 26225-79-6) with a purity by weight of 97 % or more0 %—31.12.2019ex29329900452-Butylbenzofuran (CAS RN 4265-27-4)0 %—31.12.2019ex29329900507-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6)0 %—31.12.2020ex29329900531,3-Dihydro-1,3-dimethoxyisobenzofurane (CAS RN 24388-70-3)0 %—31.12.2023ex29329900556-Fluoro-3,4-dihydro-2H-1-benzopyran-2-carboxylic acid (CAS RN 99199-60-7)0 %—31.12.2019ex29329900654,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane (CAS RN 57280-22-5)0 %—31.12.2020ex29329900701,3:2,4-bis-O-Benzylidene-D-glucitol (CAS RN 32647-67-9)0 %—31.12.2021ex29329900753-(3,4-Methylenedioxyphenyl)-2-methylpropanal (CAS RN 1205-17-0)0 %—31.12.2021ex29329900801,3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol (CAS RN 81541-12-0)0 %—31.12.2023ex29329900851,3:2,4-bis-O-(3,4-dimethylbenzylidene)-D-glucitol (CAS RN 135861-56-2)0 %—31.12.2023ex2933199015Pyrasulfotole (ISO) (CAS RN 365400-11-9) with a purity by weight of 96 % or more0 %—31.12.2019ex29331990253-Difluoromethyl-1-methyl-1H-pyrazole-4-carboxylic acid (CAS RN 176969-34-9)0 %—31.12.2019ex29331990303-Methyl-1-p-tolyl-5-pyrazolone (CAS RN 86-92-0)0 %—31.12.2023 ex29331990351,3-Dimethyl-5-fluoro-1H-pyrazole-4-carbonyl fluoride (CAS RN 191614-02-5)0 %—31.12.2020ex2933199040Edaravone (INN) (CAS RN 89-25-8)0 %—31.12.2023ex29331990455-Amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1H-pyrazole-3-carbonitrile (CAS RN 120068-79-3)0 %—31.12.2021ex2933199050Fenpyroximate (ISO) (CAS RN 134098-61-6)0 %—31.12.2019ex29331990555-Methyl-1-(naphthalen-2-yl)-1,2-dihydro-3H-pyrazol-3-one (CAS RN 1192140-15-0)0 %—31.12.2021ex2933199060Pyraflufen-ethyl (ISO) (CAS RN 129630-19-9)0 %—31.12.2019ex29331990704,5-Diamino-1-(2-hydroxyethyl)-pyrazolsulphate (CAS RN 155601-30-2)0 %—31.12.2023ex29331990803-(4,5-Dihydro-3-methyl-5-oxo-1H-pyrazol-1-yl)benzenesulphonic acid (CAS RN 119-17-5)0 %—31.12.2022ex2933210035Iprodione (ISO) (CAS RN 36734-19-7) with a purity by weight of 97 % or more0 %—31.12.2020ex29332100501-Bromo-3-chloro-5,5-dimethylhydantoin (CAS RN 16079-88-2) / (CAS RN 32718-18-6)0 %—31.12.2021ex29332100551-Aminohydantoin hydrochloride (CAS RN 2827-56-7)0 %—31.12.2020ex2933210060DL-p-Hydroxyphenylhydantoin (CAS RN 2420-17-9)0 %—31.12.2021ex29332100805,5-Dimethylhydantoin (CAS RN 77-71-4)0 %—31.12.2020ex2933299015Ethyl 4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate (CAS RN 144689-93-0)0 %—31.12.2023ex29332990182-(2-chlorophenyl)-1-[2-(2-chlorophenyl)-4,5-diphenyl-2H-imidazol-2-yl]-4,5-diphenyl-1H-imidazole (CAS RN 7189-82-4)0 %—31.12.2023ex2933299025Prochloraz (ISO) (CAS RN 67747-09-5)0 %—31.12.2023ex2933299040Triflumizole (ISO) (CAS RN 68694-11-1)0 %—31.12.2019ex2933299045Prochloraz copper chloride (ISO) (CAS RN 156065-03-1)0 %—31.12.2023ex29332990501,3-Dimethylimidazolidin-2-one (CAS RN 80-73-9)0 %—31.12.2023ex2933299055Fenamidone (ISO) (CAS RN 161326-34-7) with a purity by weight of 97 % or more0 %—31.12.2019ex29332990601-Cyano-2-methyl-1-[2-(5-methylimidazol-4-ylmethylthio)ethyl]isothiourea (CAS RN 52378-40-2)0 %—31.12.2021ex2933299065(S)-tert-Butyl 2-(5-bromo-1H-imidazol-2-yl)pyrrolidine-1-carboxylate (CAS RN 1007882-59-8)0 %—31.12.2020ex2933299070Cyazofamid (ISO) (CAS RN 120116-88-3)0 %—31.12.2021ex29332990752,2′-Azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (CAS RN 27776-21-2)0 %—31.12.2021ex2933299080Imazalil (ISO) (CAS RN 35554-44-0)0 %—31.12.202229333950Fluroxypyr (ISO) methyl ester (CAS RN 69184-17-4)0 %—31.12.2019ex29333999102-Aminopyridin-4-ol hydrochloride (CAS RN 1187932-09-7)0 %—31.12.2021ex29333999112-(Chloromethyl)-4-(3-methoxypropoxy)-3-methylpyridine hydrochloride(CAS RN 153259-31-5)0 %—31.12.2019

ex29333999122,3-Dichloropyridine (CAS RN 2402-77-9)0 %—31.12.2022ex2933399913Methyl (1S,3S,4R)-2-[(1R)-1-phenylethyl]-2-azabicyclo[2.2.1]hept-5-ene-3-carboxylate (CAS RN 130194-96-6)0 %—31.12.2020ex2933399914N,4-Dimethyl-1-(phenylmethyl)- 3-piperidinamine hydrochloride (1:2) (CAS RN 1228879-37-5)0 %—31.12.2020ex2933399916Methyl (2S,5R)-5-[(benzyloxy)amino]piperidine-2-carboxylate dihydrochloride (CAS RN 1501976-34-6)0 %—31.12.2020ex29333999173,5-Dimethylpyridine (CAS RN 591-22-0)0 %—31.12.2020ex2933399919Methyl nicotinate (INNM) (CAS RN 93-60-7)0 %—31.12.2020ex2933399920Copper pyrithione powder (CAS RN 14915-37-8)0 %—31.12.2020ex2933399921Boscalid (ISO) (CAS RN 188425-85-6)0 %—31.12.2019ex2933399922Isonicotinic acid (CAS RN 55-22-1)0 %—31.12.2019ex29333999232-Chloro-3-cyanopyridine (CAS RN 6602-54-6)0 %—31.12.2020ex29333999242-Chloromethyl-4-methoxy-3,5-dimethylpyridine hydrochloride (CAS RN 86604-75-3)0 %—31.12.2019ex2933399925Imazethapyr (ISO) (CAS RN 81335-77-5)0 %—31.12.2023ex29333999262-[4-(Hydrazinylmethyl)phenyl]-pyridine dihydrochloride (CAS RN 1802485-62-6)0 %—31.12.2020ex2933399927Pyridine-2,6-dicarboxylic acid (CAS RN 499-83-2)0 %—31.12.2021ex2933399928Ethyl-3-[(3-amino-4-methylamino-benzoyl)-pyridin-2-yl-amino]-propionate (CAS RN 212322-56-0)0 %—31.12.2019ex29333999293,5-Dichloro-2-cyanopyridine (CAS RN 85331-33-5)0 %—31.12.2021ex29333999312-(Chloromethyl)-3-methyl-4-(2,2,2-trifluoroethoxy)pyridine hydrochloride(CAS RN 127337-60-4)0 %—31.12.2019ex29333999322-(Chloromethyl)-3,4-dimethoxypyridine hydrochloride (CAS RN 72830-09-2)0 %—31.12.2021ex29333999335-(3-chlorophenyl)-3-methoxypyridine-2-carbonitrile (CAS RN 1415226-39-9)0 %—31.12.2021ex29333999343-Chloro-(5-trifluoromethyl)-2-pyridineacetonitrile (CAS RN 157764-10-8)0 %—31.12.2019ex2933399935Aminopyralid (ISO) (CAS RN 150114-71-9)0 %—31.12.2023ex29333999361-[2-[5-Methyl-3-(trifluoromethyl)-1H-pyrazol-1-yl]acetyl]piperidine-4-carbothioamide (CAS RN 1003319-95-6)0 %—31.12.2022ex2933399937Aqueous solution of pyridine-2-thiol-1-oxide, sodium salt (CAS RN 3811-73-2)0 %—31.12.2021ex2933399938(2-chloropyridin-3-yl) methanol (CAS RN 42330-59-6)0 %—31.12.2022ex29333999392,6-dichloropyridine-3-carboxamide (CAS RN 62068-78-4)0 %—31.12.2022ex29333999412-chloro-6-(3-fluoro-5-isobutoxyphenyl)nicotinic acid (CAS RN 1897387-01-7)0 %—31.12.2021ex29333999455-Difluoromethoxy-2-[[(3,4-dimethoxy-2-pyridyl)methyl]thio]-1H-benzimidazole (CAS RN 102625-64-9)0 %—31.12.2019ex2933399946Fluopicolide (ISO) (CAS RN 239110-15-7) with a content by weight of 97 % or more0 %—31.12.2021 ex2933399947(-)-trans-4-(4′-Fluorophenyl)-3-hydroxymethyl-N-methylpiperidine (CAS RN 105812-81-5)0 %—31.12.2021ex2933399948Flonicamid (ISO) (CAS RN 158062-67-0)0 %—31.12.2019ex29333999512,5-Dichloro-4,6-dimethylnicotinonitrile (CAS RN 91591-63-8)0 %—31.12.2022ex29333999526-Chloro-3-nitropyridin-2-ylamine (CAS RN 27048-04-0)0 %—31.12.2023ex29333999533-Bromopyridine (CAS RN 626-55-1)0 %—31.12.2019ex29333999544-methyl-2-pyridylamine (CAS RN 695-34-1)0 %—31.12.2023ex2933399955Pyriproxyfen (ISO) (CAS RN 95737-68-1) of a purity by weight of 97 % or more0 %—31.12.2019ex2933399957Tert-butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate (CAS RN 1083057-14-0)0 %—31.12.2022ex29333999602-Fluoro-6-(trifluoromethyl)pyridine (CAS RN 94239-04-0)0 %—31.12.2023ex2933399965Acetamiprid (ISO) (CAS RN 135410-20-7)0 %—31.12.2023ex2933399967(1R,3S,4S)-tert-Butyl 3-(6-bromo-1H-benzo[d]imidazol-2-yl)-2-azabicyclo[2.2.1]heptane-2-carboxylate (CAS RN 1256387-74-2)0 %—31.12.2023ex29333999702,3-Dichloro-5-trifluoromethylpyridine (CAS RN 69045-84-7)0 %—31.12.2021ex29333999725,6-Dimethoxy-2-[(4-piperidinyl)methyl]indan-1-one (CAS RN 120014-30-4)0 %—31.12.2021ex2933399977Imazamox (ISO) (CAS RN 114311-32-9)0 %—31.12.2023ex29333999852-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3)0 %—31.12.2020ex2933491010Quinmerac (ISO) (CAS RN 90717-03-6)0 %—31.12.2023ex29334910203-Hydroxy-2-methylquinoline-4-carboxylic acid (CAS RN 117-57-7)0 %—31.12.2023ex2933491030Ethyl 4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 52980-28-6)0 %—31.12.2022ex29334910404,7-Dichloroquinoline (CAS RN 86-98-6)0 %—31.12.2019ex29334910501-Cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic acid (CAS RN 94695-52-0)0 %—31.12.2020

ex29334910 ex29334990 60 65 Roxadustat (INN) (CAS RN 808118-40-3)0 %—31.12.2023ex2933499025Cloquintocet-mexyl (ISO) (CAS RN 99607-70-2)0 %—31.12.2021ex2933499030Quinoline (CAS RN 91-22-5)0 %—31.12.2020ex2933499035[1-(4-Benzyloxy-benzyl)-2-cyclobutylmethyl-octahydro-isoquinoline-4a,8a-diol] (CUS 0141126-3)0 %—31.12.2020ex2933499040Isoquinoline (CAS RN 119-65-3)0 %—31.12.2020ex29334990456,7-Dimethoxy-3,4- dihydroisoquinoline hydrochloride (CAS RN 20232-39-7)0 %—31.12.2023ex2933499070Quinolin-8-ol (CAS RN 148-24-3)0 %—31.12.2023ex2933520010Malonylurea (barbituric acid) (CAS RN 67-52-7)0 %—31.12.2021ex29335995106-Amino-1,3-dimethyluracil (CAS RN 6642-31-5)0 %—31.12.2019 ex29335995132-Diethylamino-6-hydroxy-4-methylpyrimidine (CAS RN 42487-72-9)0 %—31.12.2023ex2933599515Sitagliptin phosphate monohydrate (CAS RN 654671-77-9)0 %—31.12.2023ex2933599517N,N′-(4,6-Dichloropyrimidine-2,5-diyl)diformamide (CAS RN 116477-30-6)0 %—31.12.2019ex29335995181-Methyl-3-phenylpiperazine (CAS RN 5271-27-2)0 %—31.12.2020ex29335995202,4-Diamino-6-chloropyrimidine (CAS RN 156-83-2)0 %—31.12.2023ex2933599521N-(2-oxo-1,2-dihydropyrimidin-4-yl)benzamide (CAS RN 26661-13-2)0 %—31.12.2020ex29335995226-chloro-1,3-dimethyluracil (CAS RN 6972-27-6)0 %—31.12.2022ex29335995236-Chloro-3-methyluracil (CAS RN 4318-56-3)0 %—31.12.2019ex29335995241-(Cyclopropylcarbonyl)piperazine hydrochloride (CAS RN 1021298-67-8)0 %—31.12.2022ex29335995265-Fluoro-4-hydrazino-2-methoxypyrimidine (CAS RN 166524-64-7)0 %—31.12.2022ex29335995272-[(2-Amino-6-oxo-1,6-dihydro-9H-purin-9-yl)methoxy]-3-hydroxypropylacetate (CAS RN 88110-89-8)0 %—31.12.2023ex2933599530Mepanipyrim (ISO) (CAS RN 110235-47-7)0 %—31.12.2023ex29335995334,6-Dichloro-5-fluoropyrimidine (CAS RN 213265-83-9)0 %—31.12.2019ex29335995376-Iodo-3-propyl-2-thioxo-2,3-dihydroquinazolin-4(1H)-one (CAS RN 200938-58-5)0 %—31.12.2019ex29335995432-(4-(2-Hydroxyethyl)piperazin-1-yl)ethanesulfonic acid (CAS RN 7365-45-9)0 %—31.12.2019ex29335995451-[3-(Hydroxymethyl)pyridin-2-yl]-4-methyl-2-phenylpiperazine (CAS RN 61337-89-1)0 %—31.12.2019ex29335995476-Methyl-2-oxoperhydropyrimidin-4-ylurea (CAS RN 1129-42-6) with a purity of 94 % or more0 %—31.12.2020ex29335995502-(2-Piperazin-1-ylethoxy)ethanol (CAS RN 13349-82-1)0 %—31.12.2019ex29335995535-Fluoro-2-methoxypyrimidin-4(3H)-one (CAS RN 1480-96-2)0 %—31.12.2020ex29335995575,7-Dimethoxy(1,2,4)triazolo(1,5-a)pyrimidin-2-amine (CAS RN 13223-43-3)0 %—31.12.2020ex29335995602,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine (CAS RN 7139-02-8)0 %—31.12.2023ex29335995651-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) (CAS RN 140681-55-6)0 %—31.12.2019ex2933599570N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine (CAS RN 63422-71-9)0 %—31.12.2023ex2933599575(2R,3S/2S,3R)-3-(6-Chloro-5-fluoro pyrimidin-4-yl)-2-(2,4-difluorophenyl)-1-(1H-1,2,4-triazol-1-yl)butan-2-ol hydrochloride, (CAS RN 188416-20-8)0 %—31.12.2019ex29335995773-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (1:1) (CAS RN 762240-92-6)0 %—31.12.2022ex29335995875-Bromo-2,4-dichloropyrimidine (CAS RN 36082-50-5)0 %—31.12.2021

ex29335995896-Benzyladenine (CAS RN 1214-39-7)0 %—31.12.2021ex2933698013Metribuzin (ISO) (CAS RN 21087-64-9) with a purity by weight of 93 % or more0 %—31.12.2020ex29336980152-Chloro-4,6-dimethoxy-1,3,5-triazine (CAS RN 3140-73-6)0 %—31.12.2020ex2933698017Benzoguanamine (CAS RN 91-76-9)0 %—31.12.2020ex2933698040Troclosene sodium (INNM) (CAS RN 2893-78-9)0 %—31.12.2021ex29336980452-(4,6-Bis-(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6)0 %—31.12.2023ex2933698055Terbutryn (ISO) (CAS RN 886-50-0)0 %—31.12.2020ex2933698060Cyanuric acid (CAS RN 108-80-5)0 %—31.12.2020ex29336980651,3,5-Triazine-2,4,6(1H,3H,5H)-trithione, trisodium salt (CAS RN 17766-26-6)0 %—31.12.2023ex2933698075Metamitron (ISO) (CAS RN 41394-05-2)0 %—31.12.2019ex2933698080Tris(2-hydroxyethyl)-1,3,5-triazinetrione (CAS RN 839-90-7)0 %—31.12.2023ex2933790015Ethyl N-(tert-Butoxycarbonyl)-L-pyroglutamate (CAS RN 144978-12-1)0 %—31.12.2021ex2933790025Methyl 2-oxo-2,3-dihydro-1H-indole-6-carboxylate (CAS RN 14192-26-8)0 %—31.12.2022ex29337900305-Vinyl-2-pyrrolidone (CAS RN 7529-16-0)0 %—31.12.2022ex29337900351-tert-butyl 2-methyl(2S)-5-oxopyrrolidine-1,2-dicarboxylate (CAS RN 108963-96-8)0 %—31.12.2023ex29337900506-Bromo-3-methyl-3H-dibenz(f,ij)isoquinoline-2,7-dione (CAS RN 81-85-6)0 %—31.12.2023ex29337900603,3-Pentamethylene-4-butyrolactam (CAS RN 64744-50-9)0 %—31.12.2019ex2933790070(S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate, (CAS RN 754186-36-2)0 %—31.12.2020ex2933998011Fenbuconazole (ISO) (CAS RN 114369-43-6)0 %—31.12.2019ex2933998012Myclobutanil (ISO) (CAS RN 88671-89-0)0 %—31.12.2019ex29339980135-Difluoromethoxy-2-mercapto-1-H-benzimidazole (CAS RN 97963-62-7)0 %—31.12.2021ex29339980142-(2H-benzotriazol-2-yl)-4-methyl-6-(2-methylprop-2-en-1-yl)phenol(CAS RN 98809-58-6)0 %—31.12.2023ex29339980152-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol (CAS RN 25973-55-1)0 %—31.12.2023ex2933998016Pyridate (ISO)(CAS RN 55512-33-9) with a purity by weight of 90 % or more0 %—31.12.2020ex2933998017Carfentrazone-ethyl (ISO) (CAS RN 128639-02-1) with a purity by weight of 93 % or more0 %—31.12.2020ex29339980192-(2,4-Dichlorophenyl)-3-(1H-1,2,4-triazol-1-yl)propan-1-ol (CAS RN 112281-82-0)0 %—31.12.2019ex29339980202-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol (CAS RN 70321-86-7)0 %—31.12.2023 ex29339980211-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(V) (CAS RN 148893-10-1)0 %—31.12.2020ex2933998023Tebuconazole (ISO) (CAS RN 107534-96-3) with a purity by weight of 95 % or more0 %—31.12.2019ex29339980241,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one (CAS RN 55621-49-3)0 %—31.12.2022ex2933998026(2S,3S,4R)-Methyl 4-(3-(1,1-difluorobut-3-enyl)-7-methoxyquinoxalin-2-yloxy)-3-ethylpyrrolidine-2-carboxylate 4-methylbenzenesulfonate (CUS 0143289-9)0 %—31.12.2020ex29339980275,6-Dimethylbenzimidazole (CAS RN 582-60-5)0 %—31.12.2019ex29339980293-[3-(4-Fluorophenyl)-1-(1-methylethyl)-1H-indol-2-yl]-(E)-2-propenal (CAS RN 93957-50-7)0 %—31.12.2020ex2933998030Quizalofop-P-ethyl (ISO) (CAS RN 100646-51-3)0 %—31.12.2023ex2933998031Triadimenol (ISO) (CAS RN 55219-65-3) with a purity by weight of 97 % or more0 %—31.12.2020ex2933998033Penconazole (ISO) (CAS RN 66246-88-6)0 %—31.12.2019ex29339980342,4-Dihydro-5-methoxy-4-methyl-3H-1,2,4-triazol-3-on (CAS RN 135302-13-5)0 %—31.12.2021ex29339980363-Chloro-2-(1,1-difluoro-3-buten-1-yl)-6-methoxyquinoxaline (CAS RN 1799733-46-2)0 %—31.12.2021ex29339980378-Chloro-5,10-dihydro-11H-dibenzo [b,e] [1,4]diazepin-11-one (CAS RN 50892-62-1)0 %—31.12.2019ex2933998038(4aS,7aS)-Octahydro-1H-pyrrolo[3,4-b]pyridine (CAS RN 151213-40-0)0 %—31.12.2021ex2933998039O-(benzotriazol-1-yl)-N,N,N′,N′-tetramethyluronium tetrafluoroborate (CAS RN 125700-67-6)0 %—31.12.2021ex2933998040trans-4-Hydroxy-L-proline (CAS RN 51-35-4)0 %—31.12.2023ex29339980415-[4′-(bromomethyl)biphenyl-2-yl]-1-trityl-1H-tetrazole (CAS RN 124750-51-2)0 %—31.12.2022ex2933998042(S)-2,2,4-Trimethylpyrrolidine hydrochloride (CAS RN 1897428-40-8)0 %—31.12.2021ex2933998044(2S,3S,4R)-Methyl 3-ethyl-4-hydroxypyrrolidine-2-carboxylate 4-methylbenzenesulphonate (CAS RN 1799733-43-9)0 %—31.12.2021ex2933998045Maleic hydrazide (ISO) (CAS RN 123-33-1)0 %—31.12.2023ex2933998046(S)-indoline-2-carboxylic acid (CAS RN 79815-20-6)0 %—31.12.2022ex2933998047Paclobutrazol (ISO) (CAS RN 76738-62-0)0 %—31.12.2022ex29339980485-Amino-6-methyl-2-benzimidazolone (CAS RN 67014-36-2)0 %—31.12.2022ex2933998050Metconazole (ISO) (CAS RN 125116-23-6)3.2 %—31.12.2023ex2933998051Diquat dibromide (ISO) (CAS RN 85-00-7) in aqueous solution for use in the manufacture of herbicides0 %—31.12.2021ex2933998052N-Boc-trans-4-Hydroxy-L-proline methyl ester (CAS RN 74844-91-0)0 %—31.12.2020

ex2933998053Potassium (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CUS 0133723-1)0 %—31.12.2023ex29339980543-(Salicyloylamino)-1,2,4-triazole (CAS RN 36411-52-6)0 %—31.12.2020ex2933998055Pyridaben (ISO) (CAS RN 96489-71-3)0 %—31.12.2019ex2933998056Methyl 3,5-diamino-6-chloropyrazine-2-carboxylate (CAS RN 1458-01-1)0 %—31.12.2023ex29339980572-(5-Methoxyindol-3-yl)ethylamine (CAS RN 608-07-1)0 %—31.12.2023ex2933998067Candesartan ethyl ester (INNM) (CAS RN 139481-58-6)0 %—31.12.2021ex293399807110-Methoxyiminostilbene (CAS RN 4698-11-7)0 %—31.12.2023ex29339980721,4,7-Trimethyl-1,4,7-triazacyclononane (CAS RN 96556-05-7)0 %—31.12.2023ex2933998074Imidazo[1,2-b] pyridazine-hydrochloride (CAS RN 18087-70-2)0 %—31.12.2019ex29339980783-Amino-3-azabicyclo (3.3.0) octane hydrochloride (CAS RN 58108-05-7)0 %—31.12.2023ex29339980811,2,3-Benzotriazole (CAS RN 95-14-7)0 %—31.12.2021ex2933998082Tolytriazole (CAS RN 29385-43-1)0 %—31.12.2023ex2933998089Carbendazim (ISO) (CAS RN 10605-21-7)0 %—31.12.2023ex2934100010Hexythiazox (ISO) (CAS RN 78587-05-0)0 %—31.12.2023ex29341000154-Nitrophenyl thiazol-5-ylmethyl carbonate (CAS RN 144163-97-3)0 %—31.12.2022ex29341000202-(4-Methylthiazol-5-yl)ethanol (CAS RN 137-00-8)0 %—31.12.2023ex2934100025(S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4-morpholinobutanoate oxalate (CAS RN 1247119-36-3)0 %—31.12.2022ex2934100035(2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride (CAS RN 1185167-55-8)0 %—31.12.2022ex29341000452-Cyanimino-1,3-thiazolidine (CAS RN 26364-65-8)0 %—31.12.2019ex2934100060Fosthiazate (ISO) (CAS RN 98886-44-3)0 %—31.12.2019ex29341000803,4-Dichloro-5-carboxyisothiazole (CAS RN 18480-53-0)0 %—31.12.2021ex2934208015Benthiavalicarb-isopropyl (ISO) (CAS RN 177406-68-7)0 %—31.12.2022ex29342080302-[[(Z)-[1-(2-Amino-4-thiazolyl)-2-(2-benzothiazolylthio)-2-oxoethylidene]amino]oxy]-acetic acid, methyl ester (CAS RN 246035-38-1)0 %—31.12.2021ex29342080401,2-Benzisothiazol-3(2H)-one (Benzisothiazolinone (BIT)) (CAS RN 2634-33-5)0 %—31.12.2022ex2934208050S-(1,3-Benzothiazol-2-yl)-(Z)-2-(2-aminothiazol-4-yl)-2-(acetyloxyimino)thioacetate, (CAS RN 104797-47-9)0 %—31.12.2019ex2934208060Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS RN 143183-03-3)0 %—31.12.2020ex2934208070N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8)0 %—31.12.2020ex29343090102-Methylthiophenothiazine (CAS RN 7643-08-5)0 %—31.12.2022 ex2934999010Fluralaner (INN) (CAS RN 864731-61-3)0 %—31.12.2019ex2934999012Dimethomorph (ISO) (CAS RN 110488-70-5)0 %—31.12.2023ex2934999015Carboxin (ISO) (CAS RN 5234-68-4)0 %—31.12.2023ex2934999016Difenoconazole (ISO) (CAS RN 119446-68-3)0 %—31.12.2019ex29349990192-[4-(Dibenzo[b,f][1,4]thiazepin-11-yl)piperazin-1-yl] ethanol (CAS RN 329216-67-3)0 %—31.12.2019ex2934999020Thiophene (CAS RN 110-02-1)0 %—31.12.2019ex2934999023Bromuconazole (ISO) with a purity by weight of 96 % or more (CAS RN 116255-48-2)0 %—31.12.2021ex2934999024Flufenacet (ISO) (CAS RN 142459-58-3) with a purity by weight of 95 % or more0 %—31.12.2019ex29349990252,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8)0 %—31.12.2020ex29349990264-Methylmorpholine 4-oxide in an aqueous solution (CAS RN 7529-22-8)0 %—31.12.2019ex29349990272-(4-Hydroxyphenyl)-1-benzothiophene-6-ol (CAS RN 63676-22-2)0 %—31.12.2019ex293499902811-(Piperazin-1-yl)dibenzo[b,f][1,4]thiazepine dihydrochloride (CAS RN 111974-74-4)0 %—31.12.2021ex2934999030Dibenzo[b,f][1,4]thiazepin-11(10H)-one (CAS RN 3159-07-7)0 %—31.12.2019ex2934999031Uridine 5′-diphospho-N-acetylgalactosamine disodium salt (CAS RN 91183-98-1)0 %—31.12.2020ex2934999032Uridine 5′-diphosphoglucuronic acid trisodium salt (CAS RN 63700-19-6)0 %—31.12.2020ex29349990347-[4-(Diethylamino)-2-ethoxyphenyl]-7-(1-ethyl-2-methyl-1H-indol-3-yl)furo[3,4-b]pyridin-5(7H)-one (CAS RN 69898-40-4)0 %—31.12.2020ex2934999036Oxadiazon (ISO) (CAS RN 19666-30-9) with a purity by weight of 95 % or more0 %—31.12.2020ex29349990374-Propan-2-ylmorpholine (CAS RN 1004-14-4)0 %—31.12.2022ex29349990394-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4)0 %—31.12.2020ex293499904111-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine (CAS RN 352232-17-8)0 %—31.12.2020ex29349990421-(Morpholin-4-yl)prop-2-en-1-one (CAS RN 5117-12-4)0 %—31.12.2019ex2934999044Propiconazole (ISO) (CAS RN 60207-90-1) with a purity by weight of 92 % or more0 %—31.12.2020ex29349990464-Methoxy-5-(3-morpholin-4-yl-propoxy)-2-nitro-benzonitrile (CAS RN 675126-26-8)0 %—31.12.2021ex2934999047Thidiazuron (ISO) (CAS RN 51707-55-2) with a content by weight of 98 % or more0 %—31.12.2021ex2934999048Propan-2-ol -- 2-methyl-4-(4-methylpiperazin-1-yl)-10H-thieno[2,3-b][1,5]benzodiazepine (1:2) dihydrate (CAS RN 864743-41-9)0 %—31.12.2021ex2934999049Cytidine 5′-(disodium phosphate) (CAS RN 6757-06-8)0 %—31.12.2021

ex293499905010-[1,1′-Biphenyl]-4-yl-2-(1-methylethyl)-9-oxo-9H-thioxanthenium hexafluorophosphate, (CAS RN 591773-92-1)0 %—31.12.2020ex2934999052Epoxiconazole (ISO) (CAS RN 133855-98-8)0 %—31.12.2022ex29349990534-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0)0 %—31.12.2021ex29349990542-benzyl-2-dimethylamino-4′-morpholinobutyrophenone (CAS RN 119313-12-1)0 %—31.12.2022ex29349990561-[5-(2,6-Difluorophenyl)-4,5-dihydro-1,2-oxazol-3-yl]ethanone (CAS RN 1173693-36-1)0 %—31.12.2022ex2934999057(6R,7R)-7-Amino-8-oxo-3-(1-propenyl)-5-thia-1 -azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid (CAS RN 120709-09-3)0 %—31.12.2022ex2934999058Dimethenamide-P (ISO) (CAS RN 163515-14-8)0 %—31.12.2023ex2934999059Dolutegravir (INN) (CAS RN 1051375-16-6) or dolutegravir sodium (CAS RN 1051375-19-9)0 %—31.12.2022ex2934999060DL-Homocysteine thiolactone hydrochloride (CAS RN 6038-19-3)0 %—31.12.2023ex29349990615-(1,2-dithiolan-3-yl)valeric acid (CAS RN 1077-28-7)0 %—31.12.2023ex2934999062(2b,3a,5a,16b,17b)-2-(morpholin-4-yl)-16-(pyrrolidin-1-yl)androstane-3,17-diol 17-acetate (CAS RN 119302-24-8)0 %—31.12.2023ex2934999063(2b,3a,5a,16b,17b)-2-(morpholin-4-yl)-16-(pyrrolidin-1-yl)androstane-3,17-diol (CAS RN 119302-20-4)0 %—31.12.2023ex29349990642-Bromo-5-benzoylthiophene (CAS RN 31161-46-3)0 %—31.12.2023ex2934999066Tetrahydrothiophene-1,1-dioxide (CAS RN 126-33-0)0 %—31.12.2023ex29349990742-Isopropylthioxanthone (CAS RN 5495-84-1)0 %—31.12.2022ex2934999075(4R-cis)-1,1-Dimethylethyl-6-[2[2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate (CAS RN 125971-95-1)0 %—31.12.2021 ex29349990 ex32042000 76 10 2,5-Thiophenediylbis(5-tert-butyl-1,3-benzoxazole) (CAS RN 7128-64-5)0 %—31.12.2021ex2934999079Thiophen-2-ethanol (CAS RN 5402-55-1)0 %—31.12.2023ex2934999083Flumioxazin (ISO) (CAS RN 103361-09-7) of a purity by weight of 96 % or more0 %—31.12.2019ex2934999084Etoxazole (ISO) (CAS RN 153233-91-1) of a purity by weight of 94,8 % or more0 %—31.12.2019ex2934999086Dithianon (ISO) (CAS RN 3347-22-6)0 %—31.12.2020ex29349990872,2′-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4)0 %—31.12.2020ex2935909010Florasulam (ISO) (CAS RN 145701-23-1)0 %—31.12.2019ex2935909015Flupyrsulfuron-methyl-sodium (ISO) (CAS RN 144740-54-5)0 %—31.12.2023ex2935909020Toluenesulphonamides0 %—31.12.2023 ex2935909023N-[4-(2-Chloroacetyl)phenyl]methanesulphonamide (CAS RN 64488-52-4)0 %—31.12.2021ex2935909025Triflusulfuron-methyl (ISO) (CAS RN 126535-15-7)0 %—31.12.2023ex2935909027Methyl (3R,5S,6E)-7-{4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino]pyrimidin-5-yl}-3,5-dihydroxyhept-6-enoate (CAS RN 147118-40-9)0 %—31.12.2021ex2935909028N-Fluorobenzenesulphonimide (CAS RN 133745-75-2)0 %—31.12.2023ex29359090306-Aminopyridine-2-sulfonamide (CAS RN 75903-58-1)0 %—31.12.2021ex2935909035Chlorsulfuron (ISO) (CAS RN 64902-72-3)0 %—31.12.2023ex2935909040Venetoclax (INN) (CAS 1257044-40-8)0 %—31.12.2022ex2935909042Penoxsulam (ISO) (CAS RN 219714-96-2)0 %—31.12.2020ex2935909043Oryzalin (ISO) (CAS RN 19044-88-3)0 %—31.12.2019ex2935909045Rimsulfuron (ISO) (CAS RN 122931-48-0)0 %—31.12.2023ex2935909047Halosulfuron-methyl (ISO) (CAS RN 100784-20-1) with a purity by weight of 98 % or more0 %—31.12.2019ex2935909048(3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-yl)pyrimidin-5-yl]-3,5-dihydroxyhept-6-enoic acid -- 1-[(R)-(4-chlorophenyl)(phenyl)methyl]piperazine (1:1) (CAS RN 1235588-99-4)0 %—31.12.2021ex29359090504,4′-Oxydi(benzenesulphonohydrazide) (CAS RN 80-51-3)0 %—31.12.2023ex2935909052(1R,2R)-1-Amino-2-(difluoromethyl)-N-(1-methylcyclopropylsulphonyl) cyclopropanecarboxamide hydrochloride (CUS 0143290-2)0 %—31.12.2020ex29359090532,4-Dichloro-5-sulphamoylbenzoic acid (CAS RN 2736-23-4)0 %—31.12.2019ex2935909054Propoxycarbazone-sodium (ISO) (CAS RN 181274-15-7) with a purity by weight of 95 % or more0 %—31.12.2020ex2935909055Thifensulfuron-methyl (ISO) (CAS RN 79277-27-3)0 %—31.12.2023ex2935909056N-(p-Toluenesulphonyl)-N′-(3-(p-toluenesulphonyloxy)phenyl)urea (CAS RN 232938-43-1)0 %—31.12.2020ex2935909057N-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide (CAS RN 215917-77-4)0 %—31.12.2020ex29359090581-Methylcyclopropane-1-sulphonamide (CAS RN 669008-26-8)0 %—31.12.2020ex2935909059Flazasulfuron (ISO) (CAS RN 104040-78-0) with a purity of 94 % by weight or more0 %—31.12.2020ex2935909063Nicosulphuron (ISO), (CAS RN 111991-09-4) of a purity by weight of 91 % or more0 %—31.12.2019ex2935909065Tribenuron-methyl (ISO) (CAS RN 101200-48-0)0 %—31.12.2023ex2935909067N-(2-phenoxyphenyl)methanesulphonamide (CAS RN 51765-51-6)0 %—31.12.2021ex2935909073(2S)-2-Benzyl-N,N-dimethylaziridine-1-sulfonamide (CAS RN 902146-43-4)0 %—31.12.2022

ex2935909075Metsulfuron-methyl (ISO) (CAS RN 74223-64-6)0 %—31.12.2023ex2935909077[[4-[2-[[(3-Ethyl-2,5-dihydro-4-methyl-2-oxo-1H-pyrrol-1-yl)carbonyl]amino] ethyl]phenyl]sulfonyl]-carbamic acid ethyl ester, (CAS RN 318515-70-7)0 %—31.12.2019ex2935909085N-[4-(Isopropylaminoacetyl)phenyl]methanesulphonamide hydrochloride0 %—31.12.2019ex2935909088N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate monohydrate (CAS RN 25646-71-3)0 %—31.12.2023ex29359090893-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)-N,N-dimethyl-1,2,4-triazol-1-sulphonamide (CAS RN 348635-87-0)0 %—31.12.2021ex2938903010Ammonium glycyrrhizate (CAS RN 53956-04-0)0 %—31.12.2020ex2938909010Hesperidin (CAS RN 520-26-3)0 %—31.12.2023ex2938909020Ethylvanillin beta-D-glucopyranoside (CAS RN 122397-96-0)0 %—31.12.2023ex2938909030Rebaudioside A (CAS RN 58543-16-1)0 %—31.12.2022ex2938909040Purified steviol glycoside with a rebaudioside M (CAS RN 1220616-44-3) content of 80 % or more but not more than 90 % by weight for use in the manufacture of non-alcoholic beverages0 %—31.12.2022ex2940000030D(+)- Trehalose dihydrate (CAS RN 6138-23-4)0 %—31.12.2021ex2941203010Dihydrostreptomycin sulphate (CAS RN 5490-27-7)0 %—31.12.2021ex2942000010Sodium triacetoxyborohydride (CAS RN 56553-60-7)0 %—31.12.202132012000Wattle extract0 %—31.12.2023ex3201909020Tanning extracts derived from gambier and myrobalan fruits0 %—31.12.2023 ex32019090 ex32029000 40 10 Reaction product of Acacia mearnsii extract, ammonium chloride and formaldehyde (CAS RN 85029-52-3)0 %—31.12.2020ex3204110015Colourant C.I. Disperse Blue 360 (CAS RN 70693-64-0) and preparations based thereon with a colourant C.I. Disperse Blue 360 content of 99 % or more by weight0 %—31.12.2023ex3204110020Colourant C.I. Disperse Yellow 241 (CAS RN 83249-52-9) and preparations based thereon with a colourant C.I. Disperse Yellow 241 content of 97 % or more by weight0 %—31.12.2020ex3204110025N-(2-Chloroethyl)-4-[(2,6-dichloro-4-nitrophenyl)azo]-N-ethyl-m-toluidine (CAS RN 63741-10-6)0 %—31.12.2019ex3204110035Colourant C.I Disperse Yellow 232 (CAS RN 35773-43-4) and preparations based thereon with a colourant C.I Disperse Yellow 232 of 50 % or more by weight0 %—31.12.2022ex3204110040Colourant C.I. Disperse Red 60 (CAS RN 17418-58-5) and preparations based thereon with a colourant C.I. Disperse Red 60 content of 50 % or more by weight0 %—31.12.2021 ex3204110045 Preparation of dispersion dyes, containing: C.I. Disperse Orange 61 or Disperse Orange 288, C.I. Disperse Blue 291:1, C.I. Disperse Violet 93:1, whether or not containing C.I. Disperse Red 54 0 %—31.12.2020ex3204110050Colourant C.I. Disperse Blue 72 (CAS RN 81-48-1) and preparations based thereon with a colourant C.I. Disperse Blue 72 content of 95 % or more by weight0 %—31.12.2021ex3204110060Colourant C.I. Disperse Blue 359 (CAS RN 62570-50-7) and preparations based thereon with a colourant C.I. Disperse Blue 359 content of 50 % or more by weight0 %—31.12.2021ex3204120010Colourant C.I. Acid Blue 9 (CAS RN 2650-18-2) and preparations based thereon with a colourant C.I. Acid Blue 9 content of 50 % or more by weight0 %—31.12.2021ex3204120015Colourant C.I. Acid Brown 75 (CAS RN 8011-86-7) and preparations based thereon with a colourant C.I. Acid Brown 75 content of 75 % or more by weight0 %—31.12.2021ex3204120017Colourant C.I. Acid Brown 355 (CAS RN 84989-26-4 or 60181-77-3) and preparations based thereon with a colourant C.I. Acid Brown 355 content of 75 % or more by weight0 %—31.12.2021ex3204120025Colourant C.I. Acid Black 210 (CAS RN 85223-29-6 or 99576-15-5) and preparations based thereon with a colourant C.I. Acid Black 210 content of 50 % or more by weight0 %—31.12.2021ex3204120027Colourant C.I. Acid Brown 425 (CAS RN 75234-41-2 or 119509-49-8) and preparations based thereon with a colourant C.I. Acid Brown 425 content of 75 % or more by weight0 %—31.12.2021ex3204120035Colourant C.I. Acid Black 234 (CAS RN 157577-99-6) and preparations based thereon with a colourant C.I. Acid Black 234 content of 75 % or more by weight0 %—31.12.2021ex3204120037Colourant C.I. Acid Black 210 sodium salt (CAS RN 201792-73-6) and preparations based thereon with a colourant C.I. Acid Black 210 sodium salt content of 50 % or more by weight0 %—31.12.2021ex3204120040Liquid dye preparation containing anionic acid dye C.I. Acid Blue 182 (CAS RN 12219-26-0)0 %—31.12.2023ex3204120045Colourant C.I. Acid Blue 161/193 (CAS RN 12392-64-2) and preparations based thereon with a colourant C.I. Acid Blue 161/193 content of 75 % or more by weight0 %—31.12.2021ex3204120047Colourant C.I. Acid Brown 58 (CAS RN 70210-34-3 or 12269-87-3) and preparations based thereon with a colourant C.I. Acid Brown 58 content of 75 % or more by weight0 %—31.12.2021

ex3204120055Colourant C.I. Acid Brown 165 (CAS RN 61724-14-9) and preparations based thereon with a colourant C.I. Acid Brown 165 content of 75 % or more by weight0 %—31.12.2021ex3204120057Colourant C.I. Acid Brown 282 (CAS RN 70236-60-1 or 12219-65-7) and preparations based thereon with a colourant C.I. Acid Brown 282 content of 75 % or more by weight0 %—31.12.2021ex3204120060Colourant C.I. Acid Red 52 (CAS RN 3520-42-1) and preparations based thereon with a colourant C.I. Acid Red 52 content of 97 % or more by weight0 %—31.12.2019ex3204120065Colourant C.I. Acid Brown 432 (CAS RN 119509-50-1) and preparations based thereon with a colourant C.I. Acid Brown 432 content of 75 % or more by weight0 %—31.12.2021ex3204120070Colourant C.I. Acid blue 25 (CAS RN 6408-78-2) and preparations based thereon with a colourant C.I. Acid blue 25 content of 80 % or more by weight0 %—31.12.2020ex3204130010Colourant C.I. Basic Red 1 (CAS RN 989-38-8) and preparations based thereon with a colourant C.I. Basic Red 1 content of 50 % or more by weight0 %—31.12.2021ex3204130015Colourant C.I. Basic Blue 41 (CAS RN 12270-13-2) and preparations based thereon with a colourant C.I. Basic Blue 41 content of 50 % or more by weight0 %—31.12.2022ex3204130025Colourant C.I. Basic Red 46 (CAS RN 12221-69-1) and preparations based thereon with a colourant C.I. Basic Red 46 content of 20 % or more by weight0 %—31.12.2022ex3204130030Colourant C.I. Basic Blue 7 (CAS RN 2390-60-5) and preparations based thereon with a colourant C.I. Basic Blue 7 content of 50 % or more by weight0 %—31.12.2023ex3204130035Colourant C.I. Basic Yellow 28 (CAS RN 54060-92-3) and preparations based thereon with a colourant C.I. Basic Yellow 28 content of 75 % or more by weight0 %—31.12.2022ex3204130040Colourant C.I. Basic Violet 1 (CAS RN 603-47-4 or CAS RN 8004-87-3) and preparations based thereon with a colourant C.I. Basic Violet 1 content of 90 % or more by weight0 %—31.12.2022ex3204130045Mixture of colourant C.I. Basic Blue 3 (CAS RN 33203-82-6) and colourant C.I. Basic Blue 159 (CAS RN 105953-73-9) with a colourant Basic Blue content of 60 % or more by weight0 %—31.12.2022ex3204130050Colourant C.I Basic Violet 11 (CAS RN 2390-63-8) and preparations based thereon with a colourant C.I Basic Violet 11 content of 90 % or more by weight0 %—31.12.2019ex3204130060Colourant C.I Basic Red 1:1 (CAS RN 3068-39-1) and preparations based thereon with a colourant C.I Basic Red 1:1 content of 90 % or more by weight0 %—31.12.2019 ex3204140010Colourant C.I. Direct Black 80 (CAS RN 8003-69-8) and preparations based thereon with a colourant C.I. Direct Black 80 content of 90 % or more by weight0 %—31.12.2019ex3204140020Colourant C.I. Direct Blue 80 (CAS RN 12222-00-3) and preparations based thereon with a colourant C.I. Direct Blue 80 content of 90 % or more by weight0 %—31.12.2019ex3204140030C.I. Colourant Direct Red 23 (CAS RN 3441-14-3 ) and preparations based thereon with a colourant C.I. Direct Red 23 content of 90 % or more by weight0 %—31.12.2019ex3204140040Colourant C.I Direct Black 168, in powder form for leather dyeing (CAS RN 85631-88-5) and preparations based thereon with a colourant C.I. Direct Black 168 content by weight of 75 % or more, in powder form for leather dyeing0 %—31.12.2021ex3204150060Colourant C.I. Vat Blue 4 (CAS RN 81-77-6) and preparations based thereon with a colourant C.I. Vat Blue 4 content of 50 % or more by weight0 %—31.12.2023ex3204150070Colourant C.I. Vat Red 1 (CAS RN 2379-74-0)0 %—31.12.2023ex3204160030

Preparations based on Colourant Reactive Black 5 (CAS RN 17095-24-8) with a content thereof of 60 % or more but not more than 75 % by weight, and including one or more of the following: Colourant Reactive Yellow 201 (CAS RN 27624-67-5), 1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phenyl]azo]-, disodium salt (CAS RN 250688-43-8), or 3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl]azo]-2-[[2-sulfo-4-[[2-(sulphooxy)ethyl]sulfonyl]phenyl]azobenzoic acid sodium salt (CAS RN 906532-68-1) 0 %—31.12.2019ex3204160040 Aqueous solution of Colourant C.I. Reactive Red 141 (CAS RN 61931-52-0) with a colourant C.I. Reactive Red 141 content of 13 % or more by weight, and containing a preservative 0 %—31.12.2022ex3204170010Colourant C.I. Pigment Yellow 81 (CAS RN 22094-93-5) and preparations based thereon with a colourant C.I. Pigment Yellow 81 content of 50 % or more by weight0 %—31.12.2023ex3204170015Colourant C.I. Pigment Green 7 (CAS RN 1328-53-6) and preparations based thereon with a colourant C.I. Pigment Green 7 content of 40 % or more by weight0 %—31.12.2021ex3204170016Colourant C.I. Pigment Red 49:2 (CAS RN 1103-39-5) and preparations based thereon with a colourant C.I. Pigment Red 49:2 content of 60 % or more by weight0 %—31.12.2020 ex3204170017Colourant C.I. Pigment Red 12 (CAS RN 6410-32-8) and preparations based thereon with a colourant C.I. Pigment Red 12 content of 35 % or more by weight0 %—31.12.2019ex3204170018Colourant C.I. Pigment Orange 16 (CAS RN 6505-28-8) and preparations based thereon with a colourant C.I. Pigment Orange 16 content of 90 % or more by weight0 %—31.12.2021ex3204170019Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) and preparations based thereon with a colourant C.I. Pigment Red 48:2 content of 85 % or more by weight0 %—31.12.2023ex3204170020Colourant C.I. Pigment Blue 15:3 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:3 content of 35 % or more by weight0 %—31.12.2021ex3204170021Colourant C.I. Pigment Blue 15:4 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:4 content of 35 % or more by weight0 %—31.12.2019ex3204170022Colourant C.I. Pigment Red 169 (CAS RN 12237-63-7) and preparations based thereon with a colourant C.I. Pigment Red 169 content of 50 % or more by weight0 %—31.12.2021ex3204170023Colourant C.I. Pigment Brown 41 (CAS RN 211502-16-8 or CAS RN 68516-75-6)0 %—31.12.2019ex3204170024Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) and preparations based thereon with a Colourant C.I. Pigment Red 57:1 content of 20 % or more by weight0 %—31.12.2023ex3204170025Colourant C.I. Pigment Yellow 14 (CAS RN 5468-75-7) and preparations based thereon with a colourant C.I. Pigment Yellow 14 content of 25 % or more by weight0 %—31.12.2021ex3204170026Colourant C.I. Pigment Orange 13 (CAS RN 3520-72-7) and preparations based thereon with a colourant C.I. Pigment Orange 13 content of 80 % or more by weight0 %—31.12.2022ex3204170029Colourant C.I. Pigment Red 268 (CAS RN 16403-84-2) and preparations based thereon with a Colourant C.I. Pigment Red 268 content of 80 % or more by weight0 %—31.12.2022ex3204170033Colourant C.I. Pigment Blue 15:1 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:1 content of 35 % or more by weight0 %—31.12.2020ex3204170035Colourant C.I. Pigment Red 202 (CAS RN 3089-17-6) and preparations based thereon with a colourant C.I. Pigment Red 202 content of 70 % or more by weight0 %—31.12.2021ex3204170037Colourant C.I. Pigment Red 81:2 (CAS RN 75627-12-2) and preparations based thereon with a colourant C.I. Pigment Red 81:2 content of 30 % or more by weight0 %—31.12.2023

ex3204170040Colourant C.I. Pigment Yellow 120 (CAS RN 29920-31-8) and preparations based thereon with a colourant C.I. Pigment Yellow 120 content of 50 % or more by weight0 %—31.12.2019ex3204170045Colourant C.I. Pigment Yellow 174 (CAS RN 78952-72-4), highly resinated pigment (approx. 35 % disproportionate resin), with a purity of 98 % by weight or more, in the form of extruded beads with a moisture content of not more than 1 % by weight0 %—31.12.2023ex3204170065Colourant C.I. Pigment Red 53 (CAS RN 2092-56-0) and preparations based thereon with a colourant C.I. Pigment Red 53 content of 50 % or more by weight0 %—31.12.2021ex3204170075Colourant C.I. Pigment Orange 5 (CAS RN 3468-63-1) and preparations based thereon with a colourant C.I. Pigment Orange 5 content of 80 % or more by weight0 %—31.12.2022ex3204170080Colourant C.I. Pigment Red 207 (CAS RN 71819-77-7) and preparations based thereon with a colourant C.I. Pigment Red 207 content of 50 % or more by weight0 %—31.12.2022ex3204170085Colourant C.I. Pigment Blue 61 (CAS RN 1324-76-1) and preparations based thereon with a colourant C.I. Pigment Blue 61 content of 35 % or more by weight0 %—31.12.2022ex3204170088Colourant C.I. Pigment Violet 3 (CAS RN 1325-82-2 or CAS RN 101357-19-1) and preparations based thereon with a colourant C.I. Pigment Violet 3 content of 90 % or more by weight0 %—31.12.2022ex3204190012Colourant C.I. Solvent Violet 49 (CAS RN 205057-15-4)0 %—31.12.2019ex3204190013Colourant C.I. Sulphur Black 1 (CAS RN 1326-82-5) and preparations based thereon with a colourant C.I. Sulphur Black 1 content of 75 % or more by weight0 %—31.12.2021ex3204190014 Red colourant preparation, in a form of wet paste, containing by weight: 35 % or more but not more than 40 % of 1-[[4-(phenylazo)phenyl]azo]naphthalen-2-ol methyl derivatives (CAS RN 70879-65-1) not more than 3 % of 1-(phenylazo)naphthalen-2-ol (CAS RN 842-07-9) not more than 3 % of 1-[(2-methylphenyl)azo]naphthalen-2-ol (CAS RN 2646-17-5) 55 % or more but not more than 65 % of water 0 %—31.12.2019ex3204190016Colourant C.I Solvent Yellow 133 (CAS RN 51202-86-9) and preparations based thereon with a colourant C.I. Solvent Yellow 133 content of 97 % or more by weight0 %—31.12.2022ex3204190021Photochromic dye, 4-(3-(4-butoxyphenyl)-6-methoxy-3-(4-methoxyphenyl)-13,13-dimethyl-11-(trifluoromethyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-7-yl)morpholine (CAS RN 1021540-64-6)0 %—31.12.2019 ex3204190070Colourant C.I. Solvent Red 49:2 (CAS RN 1103-39-5) and preparations based thereon with a colourant C.I. Solvent Red 49:2 content of 90 % or more by weight0 %—31.12.2019ex3204190071Colourant C.I. Solvent Brown 53 (CAS RN 64696-98-6) and preparations based thereon with a colourant C.I. Solvent Brown 53 content of 95 % or more by weight0 %—31.12.2020ex3204190073Colourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with a colourant C.I. Solvent Blue 104 content of 97 % or more by weight0 %—31.12.2020ex3204190077Colourant C.I. Solvent Yellow 98 (CAS RN 27870-92-4 or CAS RN 12671-74-8) and preparations based thereon with a colourant C.I. Solvent Yellow 98 content of 95 % or more by weight0 %—31.12.2021ex3204190084Colourant C.I. Solvent Blue 67 (CAS RN 12226-78-7) and preparations based thereon with a colourant C.I. Solvent Blue 67 content of 98 % or more by weight0 %—31.12.2022ex3204200030Colourant C.I. Fluorescent Brightener 351 (CAS RN 27344-41-8) and preparations based thereon with a colourant C.I. Fluorescent Brightener 351 content of 90 % or more by weight0 %—31.12.2021ex3204900010Colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) (CAS RN 68427-35-0) and preparations based thereon with a colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) content of 90 % or more by weight0 %—31.12.2019ex3204900020Preparations of colourant C.I. Solvent Red 175 (CAS RN 68411-78-6) in petroleum distillates, hydrotreated light naphthenic (CAS RN 64742-53-6), containing by weight 40 % or more but not more than 60 % of a colourant C.I. Solvent Red 1750 %—31.12.2022ex3205000010Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical industry0 %—31.12.2023ex3206110010Titanium dioxide coated with isopropoxytitanium triisostearate, containing by weight 1,5 % or more but not more than 2,5 % of isopropoxytitanium triisostearate0 %—31.12.2023ex3206190010

Preparation containing by weight: 72 % (± 2 %) of mica (CAS RN 12001-26-2), and 28 % (± 2 %) of titanium dioxide (CAS RN 13463-67-7) 0 %—31.12.2021ex3206420010Lithopone (CAS RN 1345-05-7)0 %—31.12.2023ex3206497020Colourant C.I. Pigment Blue 27 (CAS RN 14038-43-8)0 %—31.12.2019ex3206497030Colourant C.I. Pigment Black 12 (CAS RN 68187-02-0) and preparations based thereon with a C.I. Pigment Black 12 content of 50 % or more by weight0 %—31.12.2022 ex3206497040Colourant C.I. Pigment Blue 27 (CAS RN 25869-00-5) and preparations thereon with a colourant C.I. Pigment Blue 27 content of 85 % or more by weight0 %—31.12.202232065000Inorganic products of a kind used as luminophores0 %—31.12.2023ex3207300020 Printing paste containing 30 % by weight or more, but not more than 50 % of silver, and 8 % by weight or more, but not more than 17 % of palladium 0 %—31.12.2019ex3207408540 Glass flakes (CAS RN 65997-17-3): of a thickness of 0,3 μm or more but not more than 10 μm, and coated with titanium dioxide (CAS RN 13463-67-7) or iron oxide (CAS RN 18282-10-5) 0 %—31.12.2022ex3208101010Thermoplastic polyester copolymer resin with a solid content of 30 % or more but not more than 50 %, in organic solvents0 %—31.12.2020ex3208201010Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, in the form of a solution in ethanol containing by weight 34 % or more but not more than 40 % of copolymer0 %—31.12.2023ex3208201020Immersion topcoat solution containing by weight 0,5 % or more but not more than 15 % of acrylate-methacrylate-alkenesulphonate copolymers with fluorinated side chains, in a solution of n-butanol and/or 4-methyl-2-pentanol and/or diisoamylether0 %—31.12.2023ex3208901915Chlorinated polyolefins, in a solution0 %—31.12.2023ex3208901920Preparation of 5 % or more but not more than 20 % by weight of propylene maleic anhydride copolymer or a blend of polypropylene and propylene maleic anhydride copolymer in an organic solvent0 %—31.12.2020 ex32089019 ex39046980 25 89 Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50 % (± 2 %) by weight0 %—31.12.2022ex3208901940Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol and isopropanol, containing by weight 5 % or more but not more than 11 % of polymer of methylsiloxane0 %—31.12.2023 ex32089019 ex38249992 45 63 Polymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically modified by reaction with an alkyne halide, dissolved in propylene glycol methyl ether acetate0 %—31.12.2023ex3208901947 Solution containing by weight: 0,1 % or more but not more than 20 % of alkoxygroups containing siloxane polymer with alkyl or aryl substituents 75 % or more of an organic solvent containing one or more of propyleneglycolethylether (CAS RN 1569-02-4), propylene glycol mono methylether acetate (CAS RN 108-65-6) or propyleneglycol propylether (CAS RN 1569-01-3) 0 %—31.12.2021 ex3208901950 Solution containing by weight:

(65 ± 10) % of γ-butyrolactone, (30 ± 10) % of polyamide resin, (3,5 ± 1,5) % of naphthoquinone ester derivative, and (1,5 ± 0,5) % of arylsilicic acid 0 %—31.12.2023ex3208901960 Copolymer of hydroxystyrene with one or more of the following: styrene alkoxystyrene alkylacrylates dissolved in ethyl lactate 0 %—31.12.2021ex3208901965Silicones containing 50 % by weight or more of xylene and not more than 25 % by weight of silica, of a kind used for the manufacture of long term surgical implants0 %—31.12.2019ex3208901975Acenaphthalene copolymer in ethyl lactate solution0 %—31.12.2022 ex32151100 ex32151900 10 10 Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments0 %—31.12.2023ex3215190020 Ink: consisting of a polyester polymer and a dispersion of silver (CAS RN 7440-22-4) and silver chloride (CAS RN 7783-90-6) in methyl propyl ketone (CAS RN 107-87-9), with a total solid content by weight of 55 % or more, but not more than 57 %, and with a specific density of 1,40 g/cm3 or more, but not more than 1,60 g/cm3, for use in the manufacture of electrodes 0 %l31.12.2022ex3215907010Ink formulation, for use in the manufacture of ink-jet cartridges0 %—31.12.2023ex3215907020Heat sensitive ink fixed on a plastic film0 %—31.12.2023ex3215907030 Disposable cartridge ink, containing by weight: 1 % or more, but not more than 10 % of amorphous silicon dioxide, or 3,8 % or more of dye C.I. Solvent Black 7 in organic solvents, for use in the marking of integrated circuits 0 %—31.12.2023 ex3215907040 Dry ink powder with a base of hybrid resin (made from polystyrene acrylic resin and polyester resin) mixed with: wax, a vinyl-based polymer, and a colouring agent, for use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices 0 %—31.12.202033011210Essential oil of orange, not deterpenated0 %—31.12.2023ex3402119010Sodium lauroyl methyl isethionate0 %—31.12.2020ex3402130010Vinyl copolymer surface active agent based on polypropylene glycol0 %—31.12.2023ex3402130020Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised with oxirane, methyl terminated0 %—31.12.2022ex3402901010Surface-active mixture of methyltri-C8-C10-alkylammonium chlorides0 %—31.12.2019ex3402901020Mixture of docusate sodium (INN) and sodium benzoate0 %—31.12.2023ex3402901030Surface-active preparation, consisting of a mixture of sodium docusate and ethoxylated 2,4,7,9-tetramethyldec-5-yne-4,7-diol (CAS RN 577-11-7 and 9014-85-1)0 %—31.12.2020ex3402901050Surface-active preparation, consisting of a mixture of polysiloxane and poly(ethylene glycol)0 %—31.12.2020ex3402901060Surface-active preparation, containing 2-ethylhexyloxymethyl oxirane0 %—31.12.2020ex3402901070Surface-active preparation, containing ethoxylated 2,4,7,9-tetramethyl-5-decyne-4,7-diol (CAS RN 9014-85-1)0 %—31.12.2019ex3501909010Non edible sodium caseinate (CAS RN 9005-46-3) in the form of powder with a protein content of more than 88 % by weight for use in the production of thermoplastic granules0 %—31.12.2023

ex35069110 ex35069190 10 10 Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA)0 %—31.12.2023 ex35069110 ex35069190 30 30 Two component microencapsulated epoxy adhesive dispersed in a solvent0 %—31.12.2023 ex35069110 ex35069190 40 40 Acrylic pressure sensitive adhesive with a thickness of 0,076 mm or more but not more than 0,127 mm, put up in rolls of a width of 45,7 cm or more but not more than 132 cm supplied on a release liner with an initial peel adhesion release value of not less than 15 N/25 mm (measured according to ASTM D3330)0 %—31.12.2019 ex35069110 ex35069190 50 50 Preparation containing by weight: 15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers, and 10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers, dissolved in: Methyl ethyl ketone (CAS RN 78-93-3), Heptane (CAS RN 142-82-5), and Toluene (CAS RN 108-88-3) or light aliphatic solvent naphta (CAS RN 64742-89-8) 0 %—31.12.2020ex3506919060Temporary wafer-bonding adhesive material in the form of a suspension of a solid polymer in D-limonene (CAS RN 5989-27-5) with a polymeric content by weight of 65 % or more but not more than 75 %0 %l31.12.2022ex3506919070Temporary wafer-bonding release in the form of a suspension of a solid polymer in cyclopentanone (CAS RN 120-92-3) with a polymeric content of not more than 10 % by weight0 %l31.12.2022ex3507909010Preparation of Achromobacter lyticus protease (CAS RN 123175-82-6) for use in the manufacture of human and analogue insulin products0 %—31.12.2019ex3507909020Creatine amidinohydrolase (CAS RN 37340-58-2)0 %—31.12.2020ex3507909030 Salicylate 1-monooxygenase (CAS RN 9059-28-3) in aqueous solution with an enzyme concentration of 6,0 U/ml or more, but not more than 7,4 U/ml, a concentration by weight of sodium azide (CAS RN 26628-22-8) of not more than 0,09 %, and a pH value of 6,5 or more, but not more than 8,5 0 %—31.12.2021ex3601000010Pyrotechnical powder in the form of granulate of cylindrical shape, composed of strontium nitrate or copper nitrate in the solution of nitroguanidine, binder and additives, used as a component of airbag inflators0 %—31.12.2021ex3603006010Igniters for gas generators with an overall maximum length of 20,34 mm or more but not more than 25,25 mm and a pin length of 6,68 mm (± 0,3 mm) or more but not more than 6,9 mm (± 0,3 mm)0 %—31.12.2022ex3701300020Photosensitive plate consisting of a photopolymer layer on a polyester foil of a total thickness of more than 0,43 mm but not more than 3,18 mm0 %—31.12.2019ex3701300030Relief printing plate, of a kind used for printing on newsprint, consisting of a metal substrate coated with a photopolymer layer of a thickness of 0,15 mm or more but not more than 0,8 mm, not covered with a release film, of a total thickness of not more than 1 mm0 %—31.12.2023 ex3701990010Plate of quartz or of glass, covered with a film of chromium and coated with a photosensitive or electron-sensitive resin, of a kind used for goods of heading 8541 or 85420 %—31.12.2023ex3707100010Photosensitive emulsion for the sensitization of silicon discs0 %—31.12.2023ex3707100015

Sensitising emulsion consisting of: by weight not more than 12 % of diazooxonaphthalenesulphonic acid ester phenolic resins in a solution containing at least 2-methoxy-1-methylethyl acetate or ethyl lactate or methyl 3-methoxypropionate or 2-heptanone 0 %—31.12.2023ex3707100025 Sensitising emulsion containing: phenolic or acrylic resins, a maximum 2 % by weight of light sensitive acid precursor, in a solution containing 2-methoxy-1-methylethyl acetate or ethyl lactate 0 %—31.12.2023ex3707100030Preparation based on photosensitive acrylic containing polymer, containing colour pigments, 2-methoxy-1-methylethylacetate and cyclohexanone and whether or not containing ethyl-3-ethoxypropionate0 %—31.12.2023ex3707100035 Sensitising emulsion or preparation containing one or more of: acrylate polymers, methacrylate polymers, derivatives of styrene polymers, containing by weight not more than 7 % of photosensitive acid precursors, dissolved in an organic solvent containing at least 2-methoxy-1-methylethyl acetate 0 %—31.12.2021ex3707100040 Sensitising emulsion, containing: not more than 10 % by weight of naphthoquinonediazide esters, 2 % or more but not more than 35 % by weight of copolymers of hydroxystyrene, not more than 7 % by weight of epoxy-containing derivatives, dissolved in 1-ethoxy-2-propyl acetate and/or ethyl lactate 0 %—31.12.2021ex3707100045 Photosensitive emulsion consisting of cyclized polyisoprene containing: 55 % or more but not more than 75 % by weight of xylene, and 12 % or more but not more than 18 % by weight of ethylbenzene 0 %—31.12.2019 ex3707100050 Photosensitive emulsion containing by weight: 20 % or more but not more than 45 % of copolymers of acrylates and/or methacrylates and hydroxystyrene derivatives, 25 % or more but not more than 50 % of organic solvent containing at least ethyl lactate and/or propylene glycolmethylether acetate, 5 % or more but not more than 30 % of acrylates, not more than 12 % of a photoinitiator 0 %—31.12.2019ex3707100055Dielectric coating, buffering mechanical stress, consisting of a radically photopatternable polyamide-precursor with unsaturated carbon in the side-chains which is convertible into a polyimide, in form of a solution from N-methyl-2-pyrrolidone or N-ethyl-2-pyrrolidone with a polymer content by weight 10 % or more0 %—31.12.2023ex3707100060 Sensitising emulsion, containing by weight: not more than 5 % of photoacid generator, 2 % or more but not more than 50 % of phenolic resins, and not more than 7 % of epoxy-containing derivatives, dissolved in heptan-2-one and/or ethyllactate 0 %—31.12.2022ex3707902910Dry ink powder or toner blend, consisting of a copolymer of styrene and butyl acrylate and either magnetite or carbon black, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers0 %—31.12.2023ex3707902940Dry ink powder or toner blend, based on a polyester resin, manufactured by a polymerisation process, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers0 %—31.12.2023ex3707902950

Dry ink powder or toner blend, consisting of: styrene acrylate/butadiene copolymer either carbon black or an organic pigment whether or not containing polyolefin or amorphous silica for use as a developer in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers 0 %—31.12.2022ex3801100010 Artificial graphite in powder form, with: an average particle size of 2,5 μm or more but not more than 26,5 μm, an iron content of less than 40 ppm, a copper content of less than 5 ppm, a nickel content of less than 5 ppm, an average surface area (N2-atmosphere) of 1,2 m2/g or more but not more than 20,4 m2/g, and a magnetic metal impurity of less than 3 ppm 0 %—31.12.2022 ex3801900010Expandable graphite (CAS RN 90387-90-9 and CAS RN 12777-87-6)0 %—31.12.2021ex3801900030 Natural or artificial graphite based powder, pitch coated, with: an average particle size of 2,5 μm or more but not more than 26,5 μm, an iron content of less than 40 ppm, a copper content of less than 5 ppm, a nickel content of less than 5 ppm, an average surface area (N2-atmosphere) of 1,2 m2/g or more but not more than 20,4 m2/g, and a magnetic metal impurity of less than 3 ppm 0 %—31.12.2023ex3802100010Mixture of activated carbon and polyethylene, in form of powder0 %—31.12.2020ex3802100020Chemically activated carbon in granular form with a Butane Working Capacity of 11 g butane/100 ml or more (as determined by the ASTM D 5228 method) used for vapour absorption and desorption in emission control canisters of motor vehicles0 %—31.12.2022ex3802100030 Chemically activated carbon in pellet (cylindrical) form, with: a diameter of 2 mm or more but not more than 3 mm, and a Butane Working Capacity of 5 g butane/100 ml or more (as determined by the ASTM D 5228 method), used for vapour absorption and desorption in emission control canisters of motor vehicles 0 %—31.12.202138059010Pine oil1.7 %—31.12.2023 ex38069000 ex39094000 10 60 Phenolic modified derivative of rosin resin, containing by weight 50 % or more but not more than 75 % of rosin esters, with an acid value of not more than 25, of a kind used in offset printing 0 %—31.12.2021ex3808919010Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide0 %—31.12.2023ex3808919030 Preparation containing endospores or spores and protein crystals derived from either: Bacillus thuringiensis Berliner subsp. aizawai and kurstaki, or Bacillus thuringiensis subsp. kurstaki, or Bacillus thuringiensis subsp. israelensis, or Bacillus thuringiensis subsp. aizawai, or Bacillus thuringiensis subsp. tenebrionis 0 %—31.12.2019 ex3808919040Spinosad (ISO)0 %—31.12.2023ex3808919060Spinetoram (ISO) (CAS RN 935545-74-7), preparation of two spinosyn components (3′-ethoxy-5,6-dihydro spinosyn J) and (3′-ethoxy- spinosyn L)0 %—31.12.2022ex3808923010Mancozeb (ISO) (CAS RN 8018-01-7) imported in immediate packings of a content of 500 kg or more0 %—31.12.2020ex3808929010Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale0 %—31.12.2023ex3808929030

Preparation consisting of a suspension of pyrithione zinc (INN) in water, containing by weight: 24 % or more but not more than 26 % of pyrithione zinc (INN), or 39 % or more but not more than 41 % of pyrithione zinc (INN) 0 %—31.12.2023ex3808929050Preparations based on copper pyrithione (CAS RN 14915-37-8)0 %—31.12.2019ex3808932310Herbicide containing flazasulfuron (ISO) as an active ingredient0 %—31.12.2019ex3808932740 Preparation, consisting of a suspension of tepraloxydim (ISO), containing by weight: 30 % or more of tepraloxydim (ISO), and not more than 70 % of a petroleum fraction consisting of aromatic hydrocarbons 0 %—31.12.2021ex3808939010 Preparation, in the form of granules, containing by weight: 38,8 % or more but not more than 41,2 % of Gibberellin A3, or 9,5 % or more but not more than 10,5 % of Gibberellin A4 and A7 0 %—31.12.2019ex3808939020 Preparation consisting of benzyl(purin-6-yl)amine in a glycol solution, containing by weight: 1,88 % or more but not more than 2,00 % of benzyl(purin-6-yl)amine of a kind used in plant growth regulators 0 %—31.12.2020ex3808939030 Aqueous solution containing by weight: 1,8 % of sodium para-nitrophenolate, 1,2 % of sodium ortho-nitrophenolate, 0,6 % of sodium 5-nitroguaiacolate, for use in the manufacture of a plant growth regulator 0 %—31.12.2020 ex3808939040 Mixed white powder containing by weight: 3 % or more but not more than 3,6 % of 1-methylcyclopropene with a purity more than 96 %, and containing less than 0,05 % of each impurity of 1-chloro-2-methylpropene and 3-chloro-2-methylpropene, for use in the manufacture of a growth regulator of post-harvest fruits, vegetables and ornamentals with a specific generator 0 %—31.12.2020ex3808939050 Preparation in the form of powder, containing by weight: 55 % or more of Gibberellin A4, 1 % or more but not more than 35 % of Gibberellin A7, 90 % or more of Gibberellin A4 and Gibberellin A7 combined, not more than 10 % of a combination of water and other naturally occurring Gibberellins, of a kind used in plant growth regulators 0 %—31.12.2020ex3808939060 Preparation in the form of tablets containing by weight: 0,55 % or more but not more than 2,50 % of 1-methylcyclopropene (1-MCP) (CAS RN 3100-04-7) with a minimum purity of 96 % or more, and less than 0,05 % of each of the two impurities, 1-chloro-2-methylpropene (CAS RN 513-37-1) and 3-chloro-2-methylpropene (CAS RN 563-47-3), for coating 0 %—31.12.2022ex3808942030 Bromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing: 1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5), 1,3-Dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5), 1-Bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and 1-Chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7) 0 %—31.12.2019ex3808999010Oxamyl (ISO) (CAS RN 23135-22-0) in a solution of cyclohexanone and water0 %—31.12.2020ex3808999020Abamectin (ISO) (CAS RN 71751-41-2)0 %—31.12.2023ex3809910010Mixture of 5-ethyl-2-methyl-2-oxo-1,3,2λ5-dioxaphosphoran-5-ylmethyl methyl methylphosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2λ5-dioxaphosphoran-5-ylmethyl) methylphosphonate0 %—31.12.2023ex3809920020Defoamer, consisting of a mixture of oxydipropanol and 2,5,8,11-tetramethyldodec-6-yn-5,8-diol0 %—31.12.2019

ex3810100010 Soldering or welding paste, consisting of a mixture of metals and resin containing by weight: 70 % or more, but not more than 90 % of tin not more than 10 % of one or more metals of silver, copper, bismuth, zinc, or indium for use in the electro technical industry 0 %—31.12.2023ex3811190010 Solution of more than 61 % but not more than 63 % by weight of methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more than: 4,9 % of 1,2,4-trimethyl-benzene, 4,9 % of naphthalene, and 0,5 % of 1,3,5-trimethyl-benzene 0 %—31.12.2019ex3811210010Salts of dinonylnaphthalenesulphonic acid, in the form of a solution in mineral oils0 %—31.12.2023ex3811210011 Dispersing agent and oxidation inhibitor containing: o-amino polyisobutylenephenol (CAS RN 78330-13-9), more than 30 % by weight but not more than 50 % by weight of mineral oils, used in the manufacture of blends of additives for lubricating oils 0 %—31.12.2021ex3811210012 Dispersing agent containing: esters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9), 35 % or more but not more than 55 % by weight of mineral oils, and with a chlorine content of not more than 0,05 % by weight, used in the manufacture of blends of additives for lubricating oils 0 %—31.12.2020ex3811210013 Additives containing: borated magnesium (C16-C24) alkylbenzene sulphonates, and mineral oils, having a total base number (TBN) of more than 250, but not more than 350, for use in the manufacture of lubricating oils 0 %—31.12.2019ex3811210014 Dispersing agent: containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9), containing 35 % or more but not more than 55 % by weight of mineral oils, with a chlorine content by weight of not more than 0,05 %, having a total base number of less than 15, used in the manufacture of blends of additives for lubricating oils 0 %—31.12.2020 ex3811210016 Detergent containing: Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol), 40 % or more but not more than 60 % by weight of mineral oils, and having a total base number more than 120, used in the manufacture of blends of additives for lubricating oils 0 %—31.12.2020ex3811210018 Detergent containing: long chain alkyltoluene calcium sulphonates, more than 30 % but not more than 50 % by weight of mineral oils, and having a total base number of more than 310 but not more than 340, used in the manufacture of blends of additives for lubricating oils 0 %—31.12.2020ex3811210019 Additives containing: a polyisobutylene succinimide based mixture, and more than 30 % but not more than 50 % by weight of mineral oils, having a total base number of more than 40, for use in the manufacture of lubricating oils 0 %—31.12.2019ex3811210020Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil0 %—31.12.2023ex3811210025

Additives containing: a (C8-18) alkyl polymethacrylate copolymer with N-[3-(dimethylamino)propyl]methacrylamide, of an average molecular weight (Mw) of more than 10000 but not more than 20000, and more than 15 %, but not more than 30 % by weight of mineral oils, for use in the manufacture of lubricating oils 0 %—31.12.2019ex3811210027 Additives containing: 20 % or more by weight of an ethylene-propylene copolymer chemically modified by succinic anhydride groups reacted with 4-(4-nitrophenylazo)aniline and 3-nitroaniline, and mineral oils, for use in the manufacture of lubricating oils 0 %—31.12.2019 ex3811210030Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2022ex3811210033 Additives containing: calcium salts of heptylphenol reaction products with formaldehyde (CAS RN 84605-23-2), and mineral oils, having a total base number (TBN) of more than 40 but not more than 100, for use in the manufacture of lubricating oils or overbased detergents for use in lubricating oils 0 %—31.12.2019ex3811210037 Additives containing: a styrene-maleic anhydride copolymer esterified with C4-C20 alcohols, modified by aminopropylmorpholine, and more than 50 % but not more than 75 % by weight of mineral oils, for use in the manufacture of lubricating oils 0 %—31.12.2019ex3811210048 Additives containing: overbased magnesium (C20-C24) alkylbenzenesulphonates (CAS RN 231297-75-9), and by weight more than 25 % but not more than 50 % of mineral oils, having a total base number of more than 350, but not more than 450, for use in the manufacture of lubricating oils 0 %—31.12.2019ex3811210050 Additives for lubricating oils: based on calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0), containing mineral oils, used as a concentrated additive for the manufacture of engine oils through a blending process 0 %—31.12.2022ex3811210053 Additives containing: overbased calcium petroleum sulphonates (CAS 68783-96-0) with a sulphonate content by weight of 15 % or more, but not more than 30 %, and by weight more than 40 % but not more than 60 % of mineral oils, having a total base number of 280 or more but not more than 420, for use in the manufacture of lubricating oils 0 %—31.12.2019ex3811210055 Additives containing: low base number calcium polypropylbenzenesulphonate (CAS RN 75975-85-8), and by weight more than 40 % but not more than 60 % of mineral oils, having a total base number of more than 10 but not more than 25, for use in the manufacture of lubricating oils 0 %—31.12.2019 ex3811210060 Additives for lubricating oils, containing mineral oils; based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %, with a total base number (TBN) of 280 or more but not more than 320,

used as a concentrated additive for the manufacture of engine oils through a blending process 0 %—31.12.2022ex3811210063 Additives containing: an overbased mixture of calcium petroleum sulphonates (CAS RN 61789-86-4) and synthetic calcium alkylbenzenesulphonates (CAS RN 68584-23-6 and CAS RN 70024-69-0) with a total sulphonate content by weight of 15 % or more, but not more than 25 %, and by weight more than 40 % but not more than 60 % of mineral oils, having a total base number of 280 or more but not more than 320, for use in the manufacture of lubricating oils 0 %—31.12.2019ex3811210065 Additives containing: a polyisobutylene succinimide based mixture (CAS RN 160610-76-4), and more than 35 % but not more than 50 % by weight of mineral oils, having a sulphur content of more than 0,7 % but not more than 1,3 % by weight, having a total base number of more than 8, for use in the manufacture of lubricating oils 0 %—31.12.2019ex3811210070 Additives for lubricating oils, containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9), containing mineral oils, with a chlorine content by weight of 0,05 % or more but not more than 0,25 %, with a total base number (TBN) of more than 20, used as a concentrated additive for the manufacture of engine oils through a blending process 0 %—31.12.2022ex3811210073 Additives containing: borated succinimide compounds (CAS RN 134758-95-5), mineral oils, and having a total base number (TBN) greater than 40, for use in the manufacture of additive mixtures for lubricating oils 0 %—31.12.2023 ex3811210075 Additives containing: Calcium (C10-C14) dialkylbenzenesulfonates, more than 40 %, but not more than 60 % by weight of mineral oils, with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils 0 %—31.12.2020ex3811210077 Antifoam additives consisting of: a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, and more than 50 % but not more than 80 % by weight of mineral oils, for use in the manufacture of additive blends for lubricating oils 0 %—31.12.2020ex3811210080 Additives containing: polyisobutylene aromatic polyamine succinimide, more than 40 % but not more than 60 % by weight of mineral oils, with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oils 0 %—31.12.2020ex3811210083 Additives containing: polyisobutene succinimide derived from reaction of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9), containing more than 31,9 % but not more than 43,3 % by weight of mineral oils, not more than 0,05 % by weight chlorine, and having a total base number (TBN) greater than 20, for use in the manufacture of additives blends for lubricating oils 0 %—31.12.2019ex3811210085 Additives: containing more than 20 % or more but not more than 45 % by weight of mineral oils,

based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated, of a kind used in the manufacture of blends of additives for lubricating oils 0 %—31.12.2022ex3811290015 Additives containing: products from the reaction of branched heptyl phenol with formaldehyde, carbon disulphide and hydrazine (CAS RN 93925-00-9), and more than15 % but not more than 28 % by weight of light aromatic petroleum naphtha solvent, for use in the manufacture of lubricating oils 0 %—31.12.2019 ex3811290018Additive consisting of dihydroxy butanedioic acid - (mixed C12-16-alkyl and C13-rich C11-14-isoalkyl) diester, of a kind used in the manufacture of automotive engine oils0 %—31.12.2023ex3811290020Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of lubricating oils0 %—31.12.2022ex3811290025Additives containing at least salts of primary amines and mono- and di-alkylphosphoric acids, for use in the manufacture of lubricating oils0 %—31.12.2019ex3811290030Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2022ex3811290035Additives consisting of an imidazoline based mixture (CAS RN 68784-17-8), for use in the manufacture of lubricating oils0 %—31.12.2019ex3811290040Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,01 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of lubricating oils0 %—31.12.2022ex3811290045Additives consisting of a mixture of (C7-C9) dialkyl adipates, in which diisooctyl adipate (CAS RN 1330-86-5) is more than 85 % by weight of the mixture, for use in the manufacture of lubricating oils0 %—31.12.2019ex3811290050Additives for lubricating oils, consisting of a mixture of N,N-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2022ex3811290065Additives consisting of a sulphurised mixture of vegetable oil, long chain α-olefins and tall oil fatty acids, with a sulphur content of 8 % or more but not more than 12 % by weight, for use in the manufacture of blends of additives for lubricating oils0 %—31.12.2020ex3811290070Additives consisting of dialkylphosphites (in which the alkyl groups contain more than 80 % by weight of oleyl, palmityl and stearyl groups), for use in the manufacture of lubricating oils0 %—31.12.2019ex3811290075Oxidation inhibitor mainly containing a mixture of isomers of 1-(tert-dodecylthio)propan-2-ol (CAS RN 67124-09-8), used in the manufacture of blends of additives for lubricating oils0 %—31.12.2021

ex3811290080 Additives containing: more than 70 % by weight of 2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole (CAS RN 89347-09-1), and more than 15 % by weight of 5-(tert-nonyldithio)- 1,3,4-thiadiazole-2(3H)-thione (CAS RN 97503-12-3), for use in the manufacture of lubricating oils 0 %—31.12.2019ex3811290085 Additives consisting of a mixture of 3-((C9-11)-isoalkyloxy)tetrahydrothiophene 1,1-dioxide, C10-rich (CAS RN 398141-87-2), for use in the manufacture of lubricating oils 0 %—31.12.2019ex3811900010Dinonylnaphthylsulphonic acid salt, in a mineral oil solution0 %—31.12.2023ex3811900040Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 10 % or more but not more than 29,9 % of 2-ethylhexanol0 %—31.12.2022ex3811900050 Corrosion inhibitor containing: polyisobutenyl succinic acid, and more than 5 % and not more than 20 % by weight of mineral oils, for use in the manufacture of blends of additives for fuels 0 %—31.12.2021ex3812100010Rubber accelerator based on diphenyl guanidine granules (CAS RN 102-06-7)0 %—31.12.2021ex3812209010 Plasticiser, containing: bis(2-ethylhexyl)-1,4-benzene dicarboxylate (CAS RN 6422-86-2) more than 10 % but not more than 60 % by weight of dibutylterephthalate (CAS RN 1962-75-0) 0 %—31.12.2023ex38123910104,4′-Isopropylidenediphenol C12-15 alcohol phosphite containing by weight 1 % or more but not more than 3 % of bisphenol A (CAS RN 96152-48-6)0 %—31.12.2019ex3812399020Mixture containing predominantly bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate0 %—31.12.2023ex3812399025 UV photo stabiliser containing: α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2), α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly (oxy-1,2-ethanediyl) (CAS RN 104810-47-1), polyethylene glycol of a weight average molecular weight (Mw) of 300 (CAS RN 25322-68-3), bis (1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7), and methyl-1,2,2,6,6-pentamethyl-4- piperidyl sebacate (CAS RN 82919-37-7) 0 %—31.12.2023 ex3812399030Compound stabilisers containing by weight 15 % or more but not more than 40 % of sodium perchlorate and not more than 70 % of 2-(2-methoxyethoxy)ethanol0 %—31.12.2019ex3812399035 Mixture containing by weight: 25 % or more but not more than 50 % of a mixture of C15-18 tetramethylpiperidinyl esters (CAS RN 86403-32-9) not more than 20 % of other organic compounds on a carrier of polypropylene (CAS RN 9003-07-0) 0 %—31.12.2023ex3812399040 Mixture of: 80 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate, and 20 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate 0 %—31.12.2023ex3812399055 UV-stabilizer, containing: 2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6), and

either N,N′-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7), or N,N′-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 82451-48-7) 0 %—31.12.2021ex3812399065 Stabiliser for plastic material containing: 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4), 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3), and 2-ethylhexyl mercaptoacetate (CAS RN 7659-86-1) 0 %—31.12.2021ex3812399070 Light stabiliser containing: branched and linear alkyl esters of 3-(2H-benzotriazolyl)-5-(1,1-dimethylethyl)-4-hydroxybenzenepropanoic acid (CAS RN 127519-17-9), and 1-methoxy-2-propyl acetate (CAS RN 108-65-6) 0 %—31.12.2021ex3812399080 UV-stabilizer, consisting of: a hindered amine: N,N′-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4-dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7), and either an o-hydroxyphenyl triazine UV light absorber, or a chemically modified phenolic compound 0 %—31.12.2022 ex3814009020 Mixture containing by weight: 69 % or more but not more than 71 % of 1-methoxypropan-2-ol, 29 % or more but not more than 31 % of 2-methoxy-1-methylethyl acetate 0 %—31.12.2023ex3814009040Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether0 %—31.12.2023ex3815120010Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not more than 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8 % or more but not more than 40 % of silver0 %—31.12.2023ex3815199010Catalysts consisting of chromium trioxide, dichromium trioxide or organometallic compounds of chromium, fixed on a silicon dioxide support with a pore volume of 2 cm3/g or more (as determined by the nitrogen absorption method)0 %—31.12.2021ex3815199013 Catalyst consisting of: chromium trioxide (CAS RN 1333-82-0), dichromium trioxide (CAS RN 1308-38-9), on a support of aluminium oxide (CAS RN 1344-28-1) 0 %—31.12.2021ex3815199015Catalyst, in the form of a powder, consisting of a mixture of metal oxides fixed on a support of silicon dioxide, containing by weight 20 % or more but not more than 40 % of molybdenum, bismuth and iron evaluated together, for use in the manufacture of acrylonitrile0 %—31.12.2023ex3815199020 Catalyst, in the form of solid spheres, of a diameter of 4 mm or more but not more than 12 mm, and consisting of a mixture of molybdenum oxide and other metal oxides, supported on silicon dioxide and/or aluminium oxide, for use in the manufacture of acrylic acid 0 %—31.12.2023ex3815199025Catalyst in the form of spheres of a diameter of 4,2 mm or more but not more than 9 mm, consisting of a mixture of metal oxides containing predominantly oxides of molybdenum, nickel, cobalt and iron, on a support of aluminium oxide, for use in the manufacture of acrylic aldehyde0 %—31.12.2023ex3815199030Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene0 %—31.12.2023ex3815199035Catalyst consisting of tungstosilicic acid hydrate (CAS RN 12027-43-9) impregnated on a support of silicon dioxide in the form of a powder0 %—31.12.2023ex3815199065Catalyst consisting of phosphoric acid chemically bonded to a support of silicon dioxide0 %—31.12.2023

ex3815199070Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide0 %—31.12.2023ex3815199075Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide0 %—31.12.2023ex3815199080Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil0 %—31.12.2023ex3815199085Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder0 %—31.12.2023ex3815199086Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polyolefins0 %—31.12.2023 ex38151990 ex85069000 87 10 Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries)0 %—31.12.2023ex3815909016Initiator based on dimethylaminopropyl urea0 %—31.12.2022ex3815909018Oxidation catalyst with an active ingredient of di[manganese (1+)], 1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN1, kN4, kN7)ethane-di-μ-oxo-μ-(ethanoato-kO, kO′)-, di[chloride(1-)] (CAS RN 1217890-37-3), used to accelerate chemical oxidation or bleaching0 %—31.12.2022ex3815909022Catalyst in powder form consisting by weight of 95 % (± 1 %) titanium dioxide and 5 % (± 1 %) silicon dioxide0 %—31.12.2022ex3815909025 Catalyst consisting by weight of: 30 % or more but not more than 33 % of bis(4-(diphenylsulphonio)phenyl)sulphide bis(hexafluorophosphate) (CAS RN 74227-35-3), and 24 % or more but not more than 27 % of diphenyl(4-phenylthio)phenylsuphonium hexafluorophosphate (CAS RN 68156-13-8), in propylene carbonate (CAS RN 108-32-7) 0 %—31.12.2023ex3815909030 Catalyst, consisting of a suspension in mineral oil of: tetrahydrofuran complexes of magnesium chloride and titanium(III) chloride, and silicon dioxide, containing 6,6 % (± 0,6 %) by weight of magnesium, and containing 2,3 % (± 0,2 %) by weight of titanium 0 %—31.12.2020ex3815909035 Catalyst containing by weight: 25 % or more but not more than 27,5 % of bis[4-(diphenylsuphonio)phenyl]sulphide bis(hexafluoroantimonate) (CAS RN 89452-37-9), and 20 % or more but not more than 22,5 % of diphenyl(4-phenylthio)phenylsufonium hexafluoroantimonate (CAS RN 71449-78-0), in propylene carbonate (CAS RN 108-32-7) 0 %—31.12.2023 ex3815909040 Catalyst: containing molybdenum oxide and other metal oxides in a silicon dioxide matrix, in the form of hollow cylindrical solids of a length of 4 mm or more but not more than 12 mm, for use in the manufacture of acrylic acid 0 %—31.12.2023ex3815909050Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9 % or more but not more than 30 % of titanium0 %—31.12.2023ex3815909070Catalyst, consisting of a mixture of (2-hydroxypropyl)trimethylammonium formate and dipropylene glycols0 %—31.12.2019ex3815909080Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol0 %—31.12.2020ex3815909081Catalyst, containing by weight 69 % or more but not more than 79 % of (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate0 %—31.12.2023ex3815909085Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerization of olefins0 %—31.12.2022ex3815909086Catalyst, in the form of rodlets, consisting of an aluminosilicate (zeolite), containing by weight 2 % or more but not more than 3 % of rare-earth metal oxides and less than 1 % of disodium oxide0 %—31.12.2023ex3815909088

Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis: 4 % or more but not more than 10 % of titanium, and 10 % or more but not more than 20 % magnesium 0 %—31.12.2023ex3815909089Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile0 %—31.12.2021ex3817005010 Mixture of alkylbenzenes (C14-26) containing by weight: 35 % or more but not more than 60 % of eicosylbenzene, 25 % or more but not more than 50 % of docosylbenzene, 5 % or more but not more than 25 % of tetracosylbenzene 0 %—31.12.2023 ex3817008010 Mixture of alkylnaphthalenes, containing by weight: 88 % or more but not more than 98 % of hexadecylnaphthalene 2 % or more but not more than 12 % of dihexadecylnaphthalene 0 %—31.12.2023ex3817008020Mixture of branched alkyl benzenes mainly containing dodecyl benzenes0 %—31.12.2023ex3817008030Mixed alkylnaphthalenes, modified with aliphatic chains, of a chain-length varying from 12 to 56 carbon atoms0 %—31.12.2021ex3819000020Fire resistant hydraulic fluid based on phosphate ester0 %—31.12.2023 ex38231930 ex38231930 20 30 Palm fatty acid distillate, whether or not hydrogenated, with free fatty acid content 80 % or more for use in the manufacture of: industrial monocarboxylic fatty acids of heading 3823, stearic acid of heading 3823, stearic acid of heading 2915, palmitic acid of heading 2915, or animal feed preparations of heading 2309 0 %—31.12.2023 ex38231990 ex38231990 20 30 Palm acid oils from refining for use in the manufacture of: industrial monocarboxylic fatty acids of heading 3823, stearic acid of heading 3823, stearic acid of heading 2915, palmitic acid of heading 2915, or animal feed preparations of heading 2309 0 %—31.12.2023ex3824991510Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11 % of sodium evaluated as sodium oxide, in the form of rodlets0 %—31.12.2023ex3824999223Butylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and propan-2-ol0 %—31.12.2020ex3824999225 Preparation containing by weight: 25 % or more but not more than 50 % of diethyl carbonate (CAS RN 105-58-8) 25 % or more but not more than 50 % of ethylene carbonate (CAS RN 96-49-1) 10 % or more but not more than 20 % of lithium hexafluorophosphate (CAS RN 21324-40-3) 5 % or more but not more than 10 % of ethyl methyl carbonate (CAS RN 623-53-0) 1 % or more but not more than 2 % of vinylene carbonate (CAS RN 872-36-6) 1 % or more but not more than 2 % of 4-fluoro-1,3-dioxolane-2-one (CAS RN 114435-02-8) Not more than 1 % of 1,5,2,4-Dioxadithiane 2,2,4,4-tetraoxide (CAS RN 99591-74-9) 0 %—31.12.2021 ex3824999226 Preparation containing by weight: 60 % or more but not more than 75 % of Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5), 15 % or more but not more than 25 % of 4-(4-nitrophenylazo)-2,6-di-sec-butyl-phenol (CAS RN 111850-24-9), and

10 % or more but not more than 15 % of 2-sec-butylphenol (CAS RN 89-72-5) 0 %—31.12.2022ex38249992274-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0) in an organic solvent0 %—31.12.2021ex3824999228 Aqueous solution containing by weight 10 % or more but not more than 42 % of 2-(3-chloro-5-(trifluoromethyl)pyridin-2-yl)ethanamine (CAS RN 658066-44-5), 10 % or more but not more than 25 % of sulphuric acid (CAS RN 7664-93-9), and 0,5 % or more but not more than 2,9 % of methanol (CAS RN 67-56-1) 0 %—31.12.2020ex3824999229 Preparation containing by weight: 85 % or more but not more than 99 % of polyethylene glycol ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate, and 1 % or more but not more than 15 % of polyoxyethylene (20) sorbitan trioleate 0 %—31.12.2020ex3824999230 Aqueous solution of caesium formate and potassium formate containing by weight: 1 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1), 1 % or more but not more than 76 % of potassium formate (CAS RN 590-24-1), and whether or not containing not more than 9 % of additives 0 %—31.12.2021ex3824999232Mixture of divinylbenzene-isomers and ethylvinylbenzene-isomers, containing by weight 56 % or more but not more than 85 % of divinylbenzene (CAS RN 1321-74-0)0 %—31.12.2019 ex38249992 ex38249993 ex38249996 33 40 40 Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either: on a support of mineral wax, whether or not modified chemically, or in the form of a solution in an organic solvent 0 %—31.12.2023ex3824999235Preparations containing not less than 92 % or more but not more than 96,5 % by weight of 1,3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol and also containing carboxylic acid derivatives and an alkyl sulphate0 %—31.12.2023 ex3824999236Calcium phosphonate phenate, dissolved in mineral oil0 %—31.12.2021ex3824999237Mixture of acetates of 3-butylene-1,2-diol with a content by weight of 65 % or more but not more than 90 %0 %—31.12.2023ex3824999239Preparation containing not less than 47 % by weight of 1,3:2,4-bis-O-benzylidene-D-glucitol0 %—31.12.2023ex3824999240Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent0 %—31.12.2020ex3824999242Preparation of tetrahydro-α-(1-naphthylmethyl)furan-2-propionic acid (CAS RN 25379-26-4) in toluene0 %—31.12.2023ex3824999245Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium salts, for the manufacture of electrolytic capacitors0 %—31.12.2023ex3824999246Diethylmethoxyborane (CAS RN 7397-46-8) in the form of a solution in tetrahydrofuran0 %—31.12.2020ex3824999247 Preparation, containing: trioctylphosphine oxide (CAS RN 78-50-2), dioctylhexylphosphine oxide (CAS RN 31160-66-4), octyldihexylphosphine oxide (CAS RN 31160-64-2), and trihexylphosphine oxide (CAS RN 3084-48-8) 0 %—31.12.2022ex3824999249Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (CAS RN 169117-72-0)0 %—31.12.2022ex3824999250Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of spectacle lenses0 %—31.12.2022ex3824999251Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid0 %—31.12.2023ex3824999253

Preparations consisting predominantly of ethylene glycol and: either diethylene glycol, dodecandioic acid and ammonia water, or N,N-dimethylformamide, or γ-butyrolactone, or silicon oxide, or ammonium hydrogen azelate, or ammonium hydrogen azelate and silicon oxide, or dodecandioic acid, ammonia water and silicon oxide, for the manufacture of electrolytic capacitors 0 %—31.12.2023ex3824999254Poly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units (CAS RN 813452-37-8)0 %—31.12.2021 ex3824999255 Additives for paints and coatings, containing: a mixture of esters of phosphoric acid obtained from the reaction of phosphoric anhydride with 4-(1,1-dimethylpropyl) phenol and copolymers of styrene-allyl alcohol (CAS RN 84605-27-6), and 30 % or more but not more than 35 % by weight of isobutyl alcohol 0 %—31.12.2023ex3824999256Poly(tetramethylene glycol) bis[(2-benzoyl-phenoxy)acetate] with an average polymer chain length of less than 5 monomer units0 %—31.12.2019ex3824999257Poly(ethylene glycol) bis(p-dimethyl)aminobenzoate with an average polymer chain length of less than 5 monomer units0 %—31.12.2019ex3824999259Potassium tert-butanolate (CAS RN 865-47-4) in the form of a solution in tetrahydrofuran0 %—31.12.2023ex3824999260N2-[1-(S)-Ethoxycarbonyl-3-phenylpropyl]-N6-trifluoroacetyl-L-lysyl-N2-carboxy anhydride in a solution of dichloromethane at 37 %0 %—31.12.2020ex38249992613′,4′,5′-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3′,4′,5′-trifluorobiphenyl-2-amine0 %—31.12.2020ex3824999264 Preparation containing by weight: 89 % or more but not more than 98,9 % of 1,2,3-trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]-nonitol 0,1 % or more but not more than 1 % of colourants 1 % or more but not more than 10 % of fluoropolymers 0 %—31.12.2021ex3824999265Mixture of primary tert-alkylamines0 %—31.12.2019ex3824999268 Preparation containing by weight: 20 % (± 1 %) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) Tribenzene (CAS RN 1404190-37-9), Dissolved in: 10 % (± 5 %) 2-sec-Butylphenol (CAS RN 89-72-5), 64 % (± 7 %) Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5), and 6 % (± 1,0 %) Naphthalene (CAS RN 91-20-3) 0 %—31.12.2020ex3824999269 Preparation containing by weight: 80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5), 7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate), and not more than 1 % triphenyl phosphate (CAS RN 115-86-6) 0 %—31.12.2020 ex3824999270Mixture of 80 % (± 10 %) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 20 % (± 10 %) of 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine0 %—31.12.2019ex3824999272N-(2-Phenylethyl)-1,3-benzenedimethanamine derivatives (CAS RN 404362-22-7)0 %—31.12.2023ex3824999276 Preparation containing: 74 % or more but not more than 90 % by weight of (S)-α-hydroxy-3-phenoxy-benzeneacetonitrile (CAS RN 61826-76-4), and

10 % or more but not more than 26 % by weight of toluene (CAS RN 108-88-3) 0 %—31.12.2023ex3824999278Preparation containing by weight either 10 % or more but not more than 20 % of lithiumfluorophosphate or 5 % or more but not more than 10 % of lithium perchlorate in mixtures of organic solvents0 %—31.12.2023ex3824999280Diethylene glycol propylene glycol triethanolamine titanate complexes (CAS RN 68784-48-5) dissolved in diethylene glycol (CAS RN 111-46-6)0 %—31.12.2022ex3824999282T-butylchloride dimethylsilane (CAS RN 18162-48-6) solution in toluene0 %—31.12.2019ex3824999284 Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and: either an aluminium-alkyl compound, or an organic complex of tungsten, or an organic complex of molybdenum 0 %—31.12.2023ex38249992882,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated0 %—31.12.2020ex3824999330 Powder Mixture containing by weight: 85 % or more of zinc diacrylate (CAS RN 14643-87-9), not more than 5 % of 2,6-di-tert-butyl-alpha-dimethylamino-p-cresol (CAS RN 88-27-7), and not more than 10 % of zinc stearate (CAS RN 557-05-1) 0 %—31.12.2019ex3824999335Paraffin with a level of chlorination of 70 % or more0 %—31.12.2019ex3824999338Mixture of 4,4′-(perfluoroisopropylidene)diphenol (CAS RN 1478-61-1) and 4,4′-(perfluoroisopropylidene)diphenol benzyl triphenyl phosphonium salt (CAS RN 75768-65-9)0 %—31.12.2022ex3824999342Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, diphenyltoluene-2,4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea0 %—31.12.2023ex3824999345 Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate (CAS RN 4681-22-5) containing by weight: not more than 20 % of disodium sulphate, and not more than 10 % of sodium chloride 0 %—31.12.2021 ex3824999350Preparation, consisting of acesulfame potassium (CAS RN 55589-62-3) and potassium hydroxide (CAS RN 1310-58-3)0 %—31.12.2021ex3824999353Zinc dimethacrylate (CAS RN 13189-00-9), containing not more than 2,5 % by weight of 2,6-di-tert-butyl-alpha-dimethyl amino-p-cresol (CAS RN 88-27-7), in the form of powder0 %—31.12.2023ex3824999355 Mixture containing by weight 70 % or more, but not more than 90 % of (S)-indoline-2-carboxylic acid (CAS RN 79815-20-6), and 10 % or more, but not more than 30 % of o-chlorocinnamic acid (CAS RN 3752-25-8) 0 %—31.12.2021ex3824999360 Mixture of phytosterols (CAS RN 949109-75-5) in powder form containing by weight: 40 % or more but not more than 88 % of sitosterols, 20 % or more but not more than 63 % of campesterols, 14 % or more but not more than 38 % of stigmasterols, not more than 13 % brassicasterols, and not more than 5 % sitostanols 0 %—31.12.2023ex3824999363 Mixture of phytosterols, not in the form of powder, containing by weight: 75 % or more of sterols, not more than 25 % of stanols, for use in the manufacture of stanols/sterols or stanol/sterol esters

0 %—31.12.2022ex3824999365Reaction mass of 1,1′-(isopropylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)benzene] (CAS RN 97416-84-7) and 1,3-dibromo-2-(2,3-dibromo-2-methylpropoxy)-5-{2-[3,5-dibromo-4-(2,3,3-tribromo-2-methylpropoxy)phenyl]propan-2-yl}benzene0 %—31.12.2023ex3824999370Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1,1′-oxybis(2-chloroethane)0 %—31.12.2019ex3824999375Mixture of phytosterols, in the form of flakes and balls, containing by weight 80 % or more of sterols and not more than 4 % of stanols0 %—31.12.2019 ex38249993 ex38249996 80 67 Film containing oxides of barium or calcium combined with either oxides of titanium or zirconium, in an acrylic binding material0 %—31.12.2019 ex38249993 ex38249996 83 85 Preparation containing: C,C′-azodi(formamide) (CAS RN 123-77-3), magnesium oxide (CAS RN 1309-48-4), and zinc bis(p-toluene sulphinate) (CAS RN 24345-02-6), in which the gas formation from C,C′-azodi(formamide) occurs at 135 °C 0 %—31.12.2023 ex38249993 ex38249996 85 57 Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges0 %—31.12.2023ex3824999388 Mixture of phytosterols containing by weight: 60 % or more, but not more than 80 % of sitosterols, less than 15 % of campesterols, less than 5 % of stigmasterols, and less than 15 % of betasitostanols 0 %—31.12.2022ex3824999630 Rare-earth concentrate containing by weight: 20 % or more but not more than 30 % of cerium oxide (CAS RN 1306-38-3), 2 % or more but not more than 10 % of lanthanum oxide (CAS RN 1312-81-8), 10 % or more but not more than 15 % of yttrium oxide (CAS RN 1314-36-9), and not more than 65 % of zirconium oxide (CAS RN 1314-23-4) including natural occurring hafnium oxide 0 %—31.12.2022ex3824999635Calcined bauxite (refractory grade)0 %—31.12.2023ex3824999637Structured silica alumina phosphate0 %—31.12.2019ex3824999645 Lithium nickel cobalt aluminum oxide powder (CAS RN 177997-13-6) with: a particle size of less than 10 μm, a purity by weight of more than 98 % 0 %—31.12.2022ex3824999646 Manganese zinc ferrite granulate, containing by weight: 52 % or more but not more than 76 % of iron(III)oxide, 13 % or more but not more than 42 % of manganese oxide, and 2 % or more but not more than 22 % of zinc oxide 0 %—31.12.2020ex3824999647 Mixed metals oxides, in the form of powder, containing by weight: either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium, or 30 % or more of lead and 5 % or more of niobium, for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors 0 %—31.12.2023ex3824999648Zirconium oxide (ZrO2), calcium oxide stabilised (CAS RN 68937-53-1) with a zirconium oxide content by weight of 92 % or more but not more than 97 %0 %—31.12.2020 ex3824999650Nickel hydroxide, doped with 12 % or more but not more than 18 % by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators0 %—31.12.2022ex3824999655

Carrier in powder form, consisting of: ferrite (Iron oxide) (CAS RN 1309-37-1) manganese oxide (CAS RN 1344-43-0) magnesium oxide (CAS RN 1309-48-4) styrene acrylate copolymer to be mixed with the toner powder, in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers 0 %—31.12.2023ex3824999660Fused magnesia containing by weight 15 % or more of dichromium trioxide0 %—31.12.2021ex3824999665 Aluminium sodium silicate, in the form of spheres of a diameter of: either 1,6mm or more but not more than 3,4 mm, or 4mm or more but not more than 6 mm 0 %—31.12.2023ex3824999670 Powder containing by weight: 28 % or more but not more than 51 % of talc (CAS RN 14807-96-6) 30,5 % or more but not more than 48 % of silicon dioxide (quartz) (CAS RN 14808-60-7) 17 % or more but not more than 26 % of aluminium oxide (CAS RN 1344-28-1) 0 %—31.12.2021ex3824999673 Reaction product, containing by weight: 1 % or more but not more than 40 % of molybdenum oxide, 10 % or more but not more than 50 % of nickel oxide, 30 % or more but not more than 70 % of tungsten oxide 0 %—31.12.2019ex3824999674 Mixture with a non-stoichiometric composition: with a crystalline structure, with a content of fused magnesia-alumina spinel and with admixtures of silicate phases and aluminates, at least 75 % by weight of which consists of fractions with a grain size of 1-3 mm and at most 25 % consists of fractions with a grain size of 0-1 mm 0 %—31.12.2021ex3824999677Preparation, consisting of 2,4,7,9-tetramethyldec-5-yne-4,7-diol and silicon dioxide0 %—31.12.2019ex3824999680 Mixture consisting of: 64 % or more, but not more than 74 % by weight of amorphous silica (CAS RN 7631-86-9), 25 % or more, but not more than 35 % by weight of butanone (CAS RN 78-93-3), and not more than 1 % by weight of 3-(2,3-epoxypropoxy)propyltrimethoxysilane (CAS RN 2530-83-8) 0 %—31.12.2021 ex3824999683Cubic Boron nitride (CAS RN 10043-11-5) coated with nickel and/or nickelphosphide (CAS RN 12035-64-2)0 %—31.12.2023ex3824999687 Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide (CAS RN 1344-28-1), containing by weight: 0,1 % or more but not more than 1 % of platinum, and 0,5 % or more but not more than 5 % of ethylaluminium dichloride (CAS RN 563-43-9) 0 %—31.12.2022 ex38260010 ex38260010 20 29 Mixture of fatty acid methyl esters containing by weight at least: 65 % or more but not more than 75 % of C12 FAME, 21 % or more but not more than 28 % of C14 FAME, 4 % or more but not more than 8 % of C16 FAME, for use in the manufacture of detergents and home and personal care products 0 %—31.12.2023 ex38260010 ex38260010 50 59 Mixture of fatty acid methyl esters containing by weight at least: 50 % or more but not more than 58 % of C8-FAME 35 % or more but not more than 50 % of C10-FAME for the manufacturing of high purity C8 or C10 fatty acid or fatty acid mixtures thereof or of high purity methylester of C8 or C10 fatty acid 0 %—31.12.2023 ex39011010

ex39014000 20 10 High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with a melt flow rate (MFR 190 °C/2,16 kg) of 16 g/10 min or more, but not more than 24 g/10 min, and a density (ASTM D 1505) of 0,922 g/cm3 or more, but not more than 0,926 g/cm3, and a vicat softening temperature of min. 94 °C 0 %m331.12.2019ex3901109030Polyethylene granules, containing by weight 10 % or more but not more than 25 % of copper0 %—31.12.2021ex3901400020 Octene linear low-density polyethylene (LLDPE) in the form of pellets of a kind used in the co-extrusion processing of films for flexible food packaging with: 10 % or more but not more than 20 % by weight of octene, a melt flow ratio of 9,0 or more, but not more than 10,0 (using ASTM D1238 10,0/2,16), a melt index (190 °C/2,16 kg) of 0,4 g / 10 min or more but not more than 0,6 g/10 min, a density of 0,909 g/cm3 or more, but not more than 0,913 g/cm3 using ASTM D4703, a gel area per 24,6 cm3 of not more than 20 mm2, and an anti-oxidant level of not more than 240 ppm 0 %m331.12.2020 ex3901400030 Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in the form of pellets with: more than 10 % but not more than 20 % by weight of copolymer, a melt flow rate (MFR 190 °C/2,16 kg) of 0,7 g/10 min or more but not more than 0,9 g/10 min, and a density (ASTM D4703) of 0,911 g/cm3 or more, but not more than 0,913 g/cm3, for use in the co-extrusion processing of films for flexible food packaging 0 %m331.12.2020ex3901400040 Block copolymer of ethylene with octene in the form of pellets: with a specific gravity of 0,862 or more, but not more than 0,865, able to stretch to at least 200 % its original length, with a hysteresis of 50 % (± 10 %), with permanent deformation of not more than 20 %, for use in the manufacture of napkin liners for babies 0 %—31.12.2020ex3901908053 Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with an acrylic acid content of 18,5 % or more but not more than 49,5 % by weight (ASTM D4094), and a melt flow rate of 14g/10 min (MFR 125 °C/2,16 kg, ASTM D1238) or more 0 %m331.12.2020ex3901908055 Zinc or sodium salt of an ethylene and acrylic acid copolymer, with: an acrylic acid content of 6 % or more but not more than 50 % by weight, and a melt flow rate of 1g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238) 0 %—31.12.2020ex3901908067Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more0 %—31.12.2020ex3901908070Ethylene maleic anhydride copolymer, whether or not containing another olefin comonomer, with a melt flow rate of 1,3 g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238)0 %—31.12.2020 ex3901908073 Mixture containing by weight: 80 % or more, but not more than 94 % of chlorinated polyethylene (CAS RN 64754-90-1), and 6 % or more, but not more than 20 % of styrene-acrylic copolymer (CAS RN 27136-15-8) 0 %—31.12.2021ex3901908091Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid0 %—31.12.2023ex3901908092Chlorosulphonated polyethylene0 %—31.12.2023ex3901908093Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticiser in the manufacture of roof sheets0 %—31.12.2023ex3901908094Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene0 %—31.12.2023ex3901908097Chlorinated polyethylene, in the form of powder0 %—31.12.2023ex3902100020

Polypropylene, containing no plasticiser: of a melting point of more than 150 °C (as determined by the ASTM D 3417 method), of a heat of fusion of 15 J/g or more but not more than 70 J/g, of an elongation at break of 1000 % or more (as determined by the ASTM D 638 method), of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method) 0 %—31.12.2023ex3902100040 Polypropylene, containing no plasticiser: of a tensile strength: of 32-60 MPa (as determined by the ASTM D638 method), of a flexural strength of 50-90 MPa (as determined by the ASTM D790 method), of a Melt Flow Rate (MFR) at 230 °C/ 2,16 kg of 5-15 g/10 min (as determined by the ASTM D1238 method), with 40 % or more but not more than 80 % by weight of polypropylene, with 10 % or more but not more than 30 % by weight of glass fibre, with 10 % or more but not more than 30 % by weight of mica 0 %—31.12.2019ex3902200010Polyisobutylene, of a number average molecular weight (Mn) of 700 or more but not more than 8000 %—31.12.2023ex3902200020Hydrogenated polyisobutene, in liquid form0 %—31.12.2023ex3902300091A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40 % or less of styrene, in one of the forms mentioned in note 6 (b) to Chapter 390 %—31.12.2023 ex3902300095 A-B-A block copolymer, consisting of: a copolymer of propylene and ethylene, and 21 % (± 3 %) by weight of polystyrene 0 %—31.12.2021ex3902300097 Liquid ethylene-propylene-copolymer with: a flashpoint of 250 °C or more, a viscosity index of 150 or more, of a number average molecular weight (Mn) of 650 or more 0 %—31.12.2021ex3902909052Amorphous poly-alpha-olefin copolymer blend of poly(propylene-co-1-butene) and petroleum hydrocarbon resin0 %—31.12.2023ex3902909055Thermoplastic elastomer, with an A-B-A block copolymer structure of polystyrene, polyisobutylene and polystyrene containing by weight 10 % or more but not more than 35 % of polystyrene0 %—31.12.2023ex3902909060 Non-hydrogenated 100 % aliphatic resin (polymer), with the following characteristics: liquid at room temperature obtained by cationic polymerisation of C-5 alkenes monomers with a number average molecular weight (Mn) of 370 (± 50) with a weight average molecular weight (Mw) of 500 (± 100) 0 %—31.12.2019ex3902909092Polymers of 4-methylpent-1-ene0 %—31.12.2023ex3902909094Chlorinated polyolefins, whether or not in a solution or dispersion0 %—31.12.2023ex3902909098Synthetic poly-alpha-olefin with a viscosity at 100 °Celsius (measured according to method ASTM D 445) ranging from 3 centistokes to 9 centistokes and obtained by polymerization of a mixture of dodecene and tetradecene, containing a maximum of 40 % of tetradecene0 %—31.12.2021ex3903190040 Crystalline polystyrene with: a melting point of 268 °C or more but not more than 272 °C, a setting point of 232 °C or more but not more than 247 °C, whether or not containing additives and filling material 0 %—31.12.2021ex3903909015 Copolymer in the form of granules containing by weight:

78 (± 4 %) of styrene, 9 (± 2 %) of n-butyl acrylate, 11 (± 3 %) of n-butyl methacrylate, 1,5 (± 0,7 %) of methacrylic acid, and 0,01 % or more but not more than 2,5 % of polyolefinic wax 0 %—31.12.2023 ex3903909020 Copolymer in the form of granules containing by weight: 83 ± 3 % styrene, 7 ± 2 % n-butyl acrylate, 9 ± 2 % n-butyl methacrylate, and 0,01 % or more but not more than 1 % of polyolefinic wax 0 %—31.12.2021ex3903909025 Copolymer in the form of granules containing by weight: 82 ± 6 % styrene, 13,5 ± 3 % n-butyl acrylate, 1 ± 0,5 % methacrylic acid, and 0,01 % or more but not more than 8,5 % of polyolefinic wax 0 %—31.12.2021 ex39039090 ex39119099 35 43 Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 °C0 %—31.12.2023 ex39039090 ex39046980 38 88 Polytetrafluoroethylene (CAS RN 9002-84-0) encapsulated with an acrylonitrile-styrene copolymer (CAS RN 9003-54-7), with a content by weight of each polymer of 50 % (± 1 %)0 %—31.12.2022ex3903909045 Preparation, in form of powder, containing by weight: 86 % or more but not more than 90 % of styrene-acrylic-copolymer, and 9 % or more but not more than 11 % of fatty acid ethoxylate (CAS RN 9004-81-3) 0 %m331.12.2019ex3903909046 Copolymer in the form of granules containing by weight: 74 % (± 4 %) styrene, 24 % (± 2 %) n-butylacrylate, and 0,01 % or more but not more than 2 % methacrylic acid 0 %m331.12.2020ex3903909055 Preparation, in form of an aqueous suspension, containing by weight: 25 % or more but not more than 26 % of styrene-acrylic-copolymer, and 5 % or more but not more than 6 % of glycol 0 %—31.12.2019 ex39039090 ex39119099 60 60 Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (Mn) of not more than 4500, in flake or powder form0 %—31.12.2021ex3903909065Copolymer of styrene with 2, 5-furandione and (1-methylethyl)benzene in the form of flakes or powder (CAS RN 26762-29-8)0 %—31.12.2020ex3903909070 Copolymer in the form of granules containing by weight: 75 % (± 7 %) styrene, and 25 % (± 7 %) methylmethacrylate 0 %m331.12.2020 ex3903909080 Granules of copolymer of styrene and divinylbenzene of a minimum diameter of 150 μm and a maximum diameter of 800 μm and containing by weight: minimum 65 % styrene, maximum 25 % divinylbenzene, for use in the manufacture of ion exchange resins 0 %—31.12.2023ex3903909086 Mixture containing by weight: 45 % or more but not more than 65 % of polymers of styrene 35 % or more but not more than 45 % of poly(phenylene ether) not more than 10 % of other additives and with one or more of the following special colour effects: metallic or pearlescent with a visual angular metamerism caused by at least 0,3 % flake-based pigment fluorescent, as characterized by emitting light during absorption of ultraviolet radiation bright white, as characterized by L not less than 92 and b not more than 2 and a between – 5 and 7 on the CIELab colour scale 0 %—31.12.2023ex3904100020

Poly(vinyl chloride) powder, not mixed with any other substances or containing any vinyl acetate monomers, with: a degree of polymerisation of 1000 (± 300) monomer units, a coefficient of heat transmission (K-value) of 60 or more, but not more than 70, a volatile material content of less than 2,00 % by weight, a sieve non-passing fraction at a mesh width of 120 μm of not more than 1 % by weight, for use in the manufacture of battery separators 0 %—31.12.2019 ex39043000 ex39044000 30 91 Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight: 87 % or more but not more than 92 % of vinyl chloride, 2 % or more but not more than 9 % of vinyl acetate, and 1 % or more but not more than 8 % of vinyl alcohol, in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of goods of headings 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink 0 %—31.12.2023 ex3904509092Vinylidene-chloride methacrylate co-polymer for use in the manufacture of monofilaments0 %—31.12.2019ex3904610020Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions0 %—31.12.2023ex3904698081Poly(vinylidene fluoride) (CAS RN 24937-79-9)0 %—31.12.2020ex3904698085Copolymer of ethylene with chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, in powder form, whether or not with fillers0 %—31.12.2022ex3904698094Copolymer of ethylene and tetrafluoroethylene0 %—31.12.2023ex3904698096Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to Chapter 390 %—31.12.2023ex3904698097Copolymer of chlorotrifluoroethylene and vinylidene difluoride0 %—31.12.2019ex3905300010Viscous preparation, essentially consisting of poly(vinyl alcohol) (CAS RN 9002-89-5), an organic solvent and water for use as protective coating of wafers during the manufacturing of semiconductors0 %—31.12.2022ex3905910040Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing by weight not more than 38 % of the monomer unit ethylene0 %—31.12.2022ex3905999095Hexadecylated or eicosylated polyvinylpyrrolidone0 %—31.12.2023ex3905999096 Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, of a weight average molecular weight (Mw) of 25000 or more but not more than 150000 and containing by weight: 9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate, and 5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol 0 %—31.12.2023ex3905999097Povidone (INN)-iodine (CAS RN 25655-41-8)0 %—31.12.2023ex3905999098Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or more but not more than 82 % of triacontyl groups0 %—31.12.202339069060Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not mixed with silicon dioxide0 %—31.12.2023ex3906909010Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading 3003 or 30040 %—31.12.2023ex3906909023Copolymer of methylmethacrylate, butylacrylate, glycidylmethacrylate and styrene (CAS RN 37953-21-2), with an epoxy equivalent weight of not more than 500, in form of ground flakes with a particle size of not more than 1 cm0 %—31.12.2022

ex3906909027Copolymer of stearyl methacrylate, isooctyl acrylate and acrylic acid, dissolved in isopropyl palmitate0 %—31.12.2022ex3906909033Core shell copolymer of butyl acrylate and alkyl methacrylate, with a particle size of 5 μm or more but not more than 10 μm0 %—31.12.2020ex3906909037Copolymer of trimethylolpropane trimethacrylate and methyl methacrylate (CAS RN 28931-67-1), in microsphere form with an average diameter of 3 μm0 %—31.12.2020ex3906909040 Transparent acrylic polymer in packages of not more than 1 kg, and not for retail sale with: a viscosity of not more than 50000 Pa · s at 120 °C as determined by the test method ASTM D 3835, a weight average molecular weight (Mw) of more than 500000 but not more than 1200000 according to the Gel Permeation Chromatography (GPC) test, a residual monomer content of less than 1 % 0 %—31.12.2020ex3906909041Poly(alkyl acrylate) with an ester alkyl chain of C10 to C300 %—31.12.2019ex3906909043Copolymer of methacrylic esters, butylacrylate and cyclic dimethylsiloxanes (CAS RN 143106-82-5)0 %—31.12.2021ex3906909050 Polymers of esters of acrylic acid with one or more of the following monomers in the chain: chloromethyl vinyl ether, chloroethyl vinyl ether, chloromethylstyrene, vinyl chloroacetate, methacrylic acid, butenedioic acid monobutyl ester, containing by weight not more than 5 % of each of the monomeric units, in one of the forms mentioned in note 6 (b) to Chapter 39 0 %—31.12.2023ex3906909053 Polyacrylamide powder having an average particle size of less than 2 microns and a melting point of more than 260 °C, containing by weight: 75 % or more but not more than 85 % of polyacrylamide, and 15 % or more but not more than 25 % of polyethylene glycol 0 %—31.12.2021ex3906909060 Aqueous dispersion containing by weight: more than 10 % but not more than 15 % of ethanol, and more than 7 % but not more than 11 % of a reaction product of poly(epoxyalkylmethacrylate-co-divinylbenzene) with a glycerol derivative 0 %—31.12.2023 ex3906909073 Preparation containing by weight: 33 % or more but not more than 37 % of butyl methacrylate - methacrylic acid copolymer, 24 % or more but not more than 28 % of propylene glycol, and 37 % or more but not more than 41 % of water 0 %—31.12.2019ex3907100010Mixture of a trioxan-oxirane-copolymer and polytetrafluoroethylene0 %—31.12.2020ex3907100020Polyoxymethylene with acetyl endcaps, containing polydimethylsiloxane and fibers of a copolymer of terephthalic acid and 1,4-phenyldiamine0 %—31.12.2020ex3907201110Poly(ethylene oxide) of a number average molecular weight (Mn) of 100000 or more0 %—31.12.2023ex3907201120Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (Mn) of 400000 %—31.12.2023ex3907201160 Preparation containing: α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2), and α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly(oxy-1,2-ethanediyl) (CAS RN 104810-47-1)

0 %—31.12.2021ex3907202020Polytetramethylene ether glycol with a weight average molecular weight (Mw) of 2700 or more but not more than 3100 (CAS RN 25190-06-1)0 %—31.12.2022ex3907202025 Copolymer of propylene oxide and butylene oxide, monododecylether, containing by weight: 48 % or more but not more than 52 % of propylene oxide, and 48 % or more but not more than 52 % of butylene oxide 0 %—31.12.2021ex3907202030Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone0 %—31.12.2023ex3907202035 Mixture containing by weight: 5 % or more but not more than 15 % of a copolymer of glycerol, propylene oxide and ethylene oxide (CAS RN 9082-00-2), and 85 % or more but not more than 95 % of a copolymer of sucrose, propylene oxide and ethylene oxide (CAS RN 26301-10-0) 0 %—31.12.2023ex3907202040Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 3500 (± 100)0 %—31.12.2023 ex39072020 ex39072099 50 75 Poly(p-phenylene oxide) in the form of powder with a glasstransitiontemperature of 210 °C, with a weight average molecular weight (Mw) of 35000 or more but not more than 80000, with an inherent viscosity of 0,2 or more but not more than 0,6 dl/gram 0 %—31.12.2019ex3907202060Polypropylene glycol monobutyl ether (CAS RN 9003-13-8) of an alkalinity of not more than 1 ppm of sodium0 %—31.12.2022ex3907209915Poly(oxypropylene) having alkoxysilyl end-groups0 %—31.12.2023ex39072099202,3-Bis(methylpolyoxyethylene-oxy)-1-[(3-maleimido-1-oxopropyl)amino]propyloxy propane (CAS RN 697278-30-1) with a number average molecular weight (Mn) of at least 20 kDa whether or not modified with a chemical entity enabling a linkage between the PEG and a protein or a peptide0 %—31.12.2023ex3907209930Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin)0 %—31.12.2023ex3907209940N-(methoxypoly (ethylene glycol) -N-(1-acetyl- (2-methoxypoly (ethylene glycol)) -glycine (CAS RN 600169-00-4) with a number average molecular weight (Mn) for polyethylene glycol of 40 kDa0 %—31.12.2023ex3907209945Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups0 %—31.12.2023ex3907209950Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient0 %—31.12.2023ex3907209955Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (Mn) of 50000 %—31.12.2023ex3907209960Polytetramethylene oxide di-p-aminobenzoate0 %—31.12.2021ex3907209970α-[3-(3-Maleimido-1-oxopropyl)amino]propyl-ω-methoxy, polyoxyethylene (CAS RN 883993-35-9)0 %—31.12.2019ex3907300015 Epoxide resin, halogen-free, containing by weight more than 2 % phosphoros calculated on the solid content, chemically bound in the epoxide resin, not containing any hydrolysable chloride or containing less than 300 ppm hydrolysable chloride, and

containing solvents, for use in the manufacture of prepreg sheets or rolls of a kind used for the production of printed circuits 0 %—31.12.2020ex3907300025 Epoxide resin containing by weight 21 % or more of brome, not containing any hydrolysable chloride or containing less than 500 ppm hydrolysable chloride, and containing solvents 0 %—31.12.2020 ex39073000 ex39269097 40 70 Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of headings 8533, 8535, 8536, 8541, 8542 or 85480 %—31.12.2023ex3907300060Polyglycerol polyglycidyl ether resin (CAS RN 118549-88-5)0 %—31.12.2022ex3907300070 Preparation of epoxy resin (CAS RN 29690-82-2) and phenolic resin (CAS RN 9003-35-4) containing by weight: 65 % or more but not more than 75 % of silicon dioxide (CAS RN 60676-86-0), and none or not more than 0,5 % of carbon black (CAS RN 1333-86-4) 0 %—31.12.2022ex3907400035α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 94334-64-2)0 %—31.12.2023ex3907400045α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 71342-77-3)0 %—31.12.2023ex3907400070 Polycarbonate of phosgene and bisphenol A: containing by weight 12 % or more but not more than 26 % of a copolymer of isophthaloyl chloride, terephthaloyl chloride and resorcinol, with p-cumylphenol endcaps, and with a weight average molecular weight (Mw) of 29900 or more but not more than 31900 0 %—31.12.2019ex3907400080Polycarbonate of carbonic dichloride, 4,4′-(1-methylethylidene)bis[2,6-dibromophenol] and 4,4′-(1-methylethylidene)bis[phenol] with 4-(1-methyl-1-phenylethyl)phenol endcaps0 %—31.12.2019ex3907690010Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol0 %—31.12.2023ex3907690040 Poly(ethylene terephthalate) pellets or granules: with a specific gravity of 1,23 or more but not more than 1,27 at 23 °C, and containing not more than 10 % by weight of other modifiers or additives 0 %m331.12.202139077000Poly(lactic acid)0 %—31.12.2023ex3907919010Diallyl phthalate prepolymer, in powder form0 %—31.12.2019ex3907990520Liquid crystal copolyester with a melting point of not less than 270 °C, whether or not containing fillers0 %—31.12.2023ex3907998010Poly(oxy-1,4-phenylenecarbonyl) (CAS RN 26099-71-8), in the form of powder0 %—31.12.2023ex3907998025Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol0 %—31.12.2022 ex39079980 ex39139000 30 20 Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)0 %—31.12.2020 ex3907998035 Copolymer in form of a clear, pale yellow liquid, consisting of: phthalic acid isomers and/or aliphatic dicarboxylic acids, aliphatic diols, and fatty acid end-caps, with: a hydroxyl number of 120 mg KOH or more but not more than 350 mg KOH, a viscosity at 25 °C of 2000 cPs or more but not more than 8000 cPs, and

an acid value less than 10 mg KOH/g 0 %—31.12.2023ex3907998040Polycarbonate of phosgene, bisphenol A, resorcinol, isophthaloyl chloride, terephthaloyl chloride andpolysiloxane, with p-cumylphenolendcaps, and a weight average molecular weight (Mw) of 24100 or more but not more than 259000 %—31.12.2019ex3907998070Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol3.5 %—31.12.2019ex3907998080Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles0 %—31.12.2020ex3908900010Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6 (b) to Chapter 390 %—31.12.2023ex3908900030Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine0 %—31.12.2023ex39089000551,4-Benzenedicarboxylic acid polymer with 2-methyl-1,8-octanediamine and 1,9-nonanediamine (CAS RN 169284-22-4)0 %—31.12.2020ex3908900070 Copolymer containing: 1,3-benzenedimethanamine (CAS RN 1477-55-0), and adipic acid (CAS RN 124-04-9), whether or not containing isophthalic acid (CAS RN 121-91-5) 0 %—31.12.2019ex3909200010 Polymer mixture, containing by weight: 60 % or more but not more than 75 % of melamine resin (CAS RN 9003-08-1), 15 % or more but not more than 25 % of silicon dioxide (CAS RN 14808-60-7 or 60676-86-0), 5 % or more but not more than 15 % of cellulose (CAS RN 9004-34-6), and 1 % or more but not more than 15 % of phenolic resin (CAS RN 25917-04-8) 0 %—31.12.2022ex3909400020Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices0 %—31.12.2020 ex3909509010 UV curable water soluble liquid photopolymer consisting of a mixture by weight of 60 % or more of two-functional acrylated polyurethane oligomers, and 30 % (± 8 %) of mono-functional and tri-functional (metha) acrylates, and 10 % (± 3 %) of hydroxyl functionalized mono-functional (metha) acrylates 0 %—31.12.2019ex3909509020 Preparation containing by weight: 14 % or more but not more than 18 % of ethoxylated polyurethane modified with hydrophobic groups, 3 % or more but not more than 5 % of enzymatically modified starch, and 77 % or more but not more than 83 % of water 0 %—31.12.2019ex3909509030 Preparation containing by weight: 16 % or more but not more than 20 % of ethoxylated polyurethane modified with hydrophobic groups, 19 % or more but not more than 23 % of diethylene glycol butyl ether, and 60 % or more but not more than 64 % of water 0 %—31.12.2019ex3909509040 Preparation containing by weight: 34 % or more but not more than 36 % of ethoxylated polyurethane modified with hydrophobic groups, 37 % or more but not more than 39 % of propylene glycol, and 26 % or more but not more than 28 % of water 0 %—31.12.2019ex3910000015Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated0 %—31.12.2020ex3910000020Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane]0 %—31.12.2023ex3910000025

Preparations containing by weight: 10 % or more, 2-hydroxy-3-[3-[1,3,3,3-tetramethyl-1-[(trimethylsilyl)oxy] disiloxanyl] propoxy] propyl-2-methyl-2-propenoate (CAS RN 69861-02-5)and 10 % or more, α-Butyldimethylsilyl- ω -3-[(2-methyl-1-oxo-2-propen-1-yl)oxy]propyl-terminated silicone polymer (CAS RN 146632-07-7) 0 %—31.12.2021ex3910000035 Preparations containing by weight: 30 % or more, α -Butyldimethylsilyl- ω -(3-methacryloxy-2-hydroxypropyloxy)propyldimethylsilyl-polydimethylsiloxane (CAS RN 662148-59-6), and 10 % or more, N,N – Dimethylacrylamide (CAS RN 2680-03-7) 0 %—31.12.2021 ex3910000040Silicones of a kind used in the manufacture of long term surgical implants0 %—31.12.2021ex3910000045Dimethyl Siloxane, hydroxy-terminated polymer with a viscosity of 38-45 MPa · s (CAS RN 70131-67-8)0 %—31.12.2021ex3910000050Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum0 %—31.12.2022ex3910000055 Preparation containing by weight: 55 % or more but not more than 65 % of vinyl terminated polydimethylsiloxane (CAS RN 68083-19-2), 30 % or more but not more than 40 % of dimethylvinylated and trimethylated silica (CAS RN 68988-89-6), and 1 % or more but not more than 5 % of silicic acid, sodium salt, reaction products with chlorotrimethylsilane and isopropyl alcohol (CAS RN 68988-56-7) 0 %—31.12.2021ex3910000060Polydimethylsiloxane, whether or not polyethylene glycol and trifluoropropyl substituted, with methacrylate end groups0 %—31.12.2019ex3910000070Passivating silicon coating in primary form, to protect edges and prevent short circuits in semiconductor devices0 %—31.12.2023ex3910000080Monomethacryloxypropylterminated poly(dimethylsiloxane)0 %—31.12.2019ex3911100081 Non-hydrogenated hydrocarbon resin, obtained by polymerization of more than 75 % by weight C-5 to C-12 cycloaliphatic alkenes and more than 10 % but not more than 25 % by weight aromatic alkenes yielding a hydrocarbon resin with: an iodine value of more than 120, and a Gardner Colour of more than 10 for the pure product, or a Gardner Colour of more than 8 for a 50 % solution by weight in toluene (as determined by the ASTM method D6166) 0 %—31.12.2023ex3911901920 Set of two components, in a volume ratio of 1:1, intended to produce a thermosetting polydicyclopentadiene after mixing, both components containing: 83 % or more by weight of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene and each separate component containing: either an aluminium-alkyl compound, or an organic complex of tungsten, or an organic complex of molybdenum 0 %—31.12.2023 ex3911901930Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide0 %—31.12.2022ex3911901940m-Xylene formaldehyde resin0 %—31.12.2021ex3911901950Polycarboxylate sodium salt of 2,5-furandione and 2,4,4-trimethylpentene in powder form0 %—31.12.2019ex3911901960Formaldehyde, polymer with 1,3-dimethylbenzene and tert-butyl-phenol (CAS RN 60806-48-6)0 %—31.12.2019ex3911901970

Preparation, containing: Cyanic acid, C,C′-((1-methylethylidene)di-4,1-phenylene) ester, homopolymer (CAS RN 25722-66-1), 1,3-Bis(4-cyanophenyl)propane (CAS RN 1156-51-0), in a solution of butanone (CAS RN 78-93-3) with a content of less than 50 % by weight 0 %—31.12.2019ex3911909925Copolymer of vinyltoluene and α-methylstyrene0 %—31.12.2023ex39119099301,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated0 %—31.12.2020ex3911909935Alternated copolymer of ethylene and maleic anhydride (EMA)0 %—31.12.2020ex3911909940Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9 % or more but not more than 16 % by weight0 %—31.12.2023ex3911909945Copolymer of maleic acid and methyl vinyl ether0 %—31.12.2023ex3911909953Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene and 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503442-46-4)0 %—31.12.2022ex3911909957Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503298-02-0)0 %—31.12.2022ex3911909965Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether0 %—31.12.2023ex3911909986Copolymer of methyl vinyl ether and maleic acid anhydride (CAS RN 9011-16-9)0 %—31.12.2021ex3912110030Cellulose triacetate (CAS RN 9012-09-3)0 %—31.12.2021ex3912110040Cellulose diacetate powder0 %—31.12.2020ex3912398510Ethylcellulose, not plasticized0 %—31.12.2023ex3912398520Ethylcellulose, in the form of an aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulphate, containing by weight 27 (± 3) % of ethylcellulose0 %—31.12.2023ex3912398530Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms0 %—31.12.2023ex3912398540Hypromellose (INN) (CAS RN 9004-65-3)0 %—31.12.2021ex3912398550Polyquaternium 10 (CAS RN 68610-92-4)0 %—31.12.2020ex3912901020Hydroxypropyl methylcellulose phthalate0 %—31.12.2023 ex3913900030Protein, chemically or enzymatically modified by carboxylation and/or phthalic acid addition, whether or not hydrolysed, having a weight average molecular weight (Mw) of less than 3500000 %—31.12.2023ex3913900085Sterile sodium hyaluronate (CAS RN 9067-32-7)0 %—31.12.2023ex3913900095Chondroitinsulphuric acid, sodium salt (CAS RN 9082-07-9)0 %—31.12.2023ex3916200091 Profiles of poly(vinyl chloride) of a kind used in the manufacture of sheet pilings and facings, containing the following additives: titanium dioxide poly(methyl methacrylate) calcium carbonate binding agents 0 %—31.12.2019ex3916901010 Rods with cellular structure, containing by weight: polyamide-6 or poly(epoxy anhydride) 7 % or more but not more than 9 % of polytetrafluorethylene if present 10 % or more but not more than 25 % of inorganic fillers 0 %—31.12.2023ex3917400091Plastic connectors containing O-rings, a retainer clip and a release system for insertion into car fuel hoses0 %—31.12.2019

ex39191019 ex39191080 ex39199080 10 25 31 Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film0 %—31.12.2023 ex39191080 ex39199080 27 20 Polyester film: coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, and on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner 0 %—31.12.2019ex3919108035Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film0 %—31.12.2023 ex3919108037 Polytetrafluoroethylene film: with a thickness of 100 μm or more, an elongation at break of not more than 100 %, coated on one side with a pressure sensitive silicon adhesive 0 %—31.12.2020 ex39191080 ex39199080 40 43 Black poly(vinyl chloride) film: with a gloss of more than 30 degrees according to ASTM D2457, whether or not covered on one side with a protective poly(ethyleneterephthalate) film, and on the other side with a pressure sensitive adhesive with channels and a release liner 0 %—31.12.2022 ex39191080 ex39199080 43 26 Ethylene vinyl acetate film: of a thickness of 100 μm or more, coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester or polypropylene liner 0 %—31.12.2020 ex39191080 ex39199080 45 45 Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm0 %—31.12.2022 ex39191080 ex39199080 ex39201089 50 41 25 Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 μm or more and an adhesive part of acrylic type of a thickness of 5 μm or more, for use in the grinding and/or dicing process of silicon discs0 %—31.12.2023 ex39191080 ex39199080 55 53 Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90° of more than 25 N/cm (as determined by the ASTM D 3330 method)0 %—31.12.2022 ex39191080 ex39199080 ex39206100 57 30 30 Reflecting sheet: of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern,

covered on one or both sides with one or more layers of plastic or metallisation, and whether or not covered on one side with a self-adhesive layer and a release sheet 0 %—31.12.2023ex3919108063 Reflecting film consisting of a layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, a layer of an acrylic resin having embedded glass beads, a layer of an acrylic resin hardened by a melamine cross-linking agent, a metal layer, an acrylic adhesive, and a release film 0 %—31.12.2020 ex39191080 ex39199080 70 75 Rolls of polyethylene foil: self-adhesive on one side, of a total thickness of 0,025 mm or more, but not more than 0,09 mm, of a total width of 60 mm or more, but not more than 1110 mm, of a kind used for the protection of the surface of products of headings 8521 or 8528 0 %—31.12.2021 ex39191080 ex39199080 73 50 Self-adhesive reflecting sheet whether or not in segmented pieces: whether or not containing a watermark, with or without an application tape coated on one side with an adhesive, the reflective sheet consists of: a layer of acrylic or vinyl polymer, a layer of poly(methyl methacrylate) or polycarbonate containing microprisms, a layer of metallisation, an adhesive layer, and a release sheet, whether or not containing an additional layer of polyester 0 %—31.12.2023 ex39191080 ex39199080 75 80 Self-adhesive reflecting film, consisting of several layers including: a copolymer of acrylic resin, polyurethane, a metallised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use, glass microspheres, and an adhesive layer, with a release liner on one or both sides 0 %—31.12.2021 ex39191080 ex39199080 85 28 Poly(vinyl chloride), poly(ethyleneterephthalate), polyethylene or any other polyolefin film: coated on one side with an acrylic UV-sensitive adhesive and a liner of a total thickness of 65 μm or more without release liner 0 %—31.12.2019ex3919908019 Transparent poly(ethylene terephthalate) self-adhesive film: free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side with an antistatic layer of ionic organic choline compound, whether or not with a printable dust-proof layer of modified long chain alkyl organic compound, with a total thickness without the liner of 54 μm or more but not more than 64 μm, and a width of more than 1295 mm but not more than 1305 mm 0 %—31.12.2023 ex3919908021 Polytetrafluoroethylene film, with a thickness of 50 μm or more but not more than 155 μm, with a width of 6,30 mm or more but not more than 585 mm, an elongation at break of not more than 200 %, and coated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 40 μm 0 %—31.12.2022ex3919908022Polyester, polyethylene or polypropylene film coated on one or both sides with an acrylic and/or rubber pressure sensitive adhesive, whether or not supplied with a release liner, put up in rolls of a width of 45,7 cm or more but not more than 160 cm0 %—31.12.2019ex3919908023Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner0 %—31.12.2023ex3919908024

Reflecting laminated sheet: consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern, covered on both sides with one or more layers of plastic material, and covered on one side with an adhesive layer and a release sheet 0 %—31.12.2019ex3919908027Poly(ethylene terephthalate) film, with an adhesive strength of not more than 0,147 N/25 mm and an electrostatic discharge of not more than 500 V0 %—31.12.2019ex3919908033Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1245 mm but not more than 1255 mm0 %—31.12.2023 ex3919908035 Reflecting layered sheet on rolls, with a width of more than 20 cm, showing an embossed regular pattern, consisting of poly(vinyl chloride) film coated on one side with: a layer of polyurethane containing glass micro beads, a layer of poly(ethylene vinyl acetate), an adhesive layer, and a release sheet 0 %—31.12.2023ex3919908037 Polyethylene or polycarbonate film, cut into ready to use forms, one side partly printed whereby part of the printing either gives information about the meaning of LED′s visible at the unprinted areas, or marks those points which must be touched to operate the system, the other side partly covered with an adhesive layer, both sides covered with a release liner, and with dimensions of not more than 14 cm × 2,5 cm, for use in the manufacture of push-button switches for mechatronic system adjustable furniture 0 %—31.12.2023ex3919908049Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet0 %—31.12.2023ex3919908051Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm, covered on one side with an adhesive layer and a release sheet0 %—31.12.2023ex3919908052 White polyolefin tape consisting of: an adhesive layer based on synthetic rubber with a thickness of 8 μm or more but not more than 17 μm, a polyolefin layer with a thickness of 28 μm or more but not more than 40 μm, and a non-silicone release layer with a thickness below 1 μm 0 %—31.12.2020ex3919908054 Poly(vinyl chloride) film, on one side covered with a polymer layer an adhesive layer a release liner, on one side embossed, containing oblate spheres, whether or not on the other side covered with an adhesive layer and a metallised polymer layer 0 %—31.12.2019 ex3919908063 Co-extruded trilayer film: each layer containing a mixture of polypropylene and polyethylene, containing not more than 3 % by weight of other polymers, whether or not containing titanium dioxide in the core layer, coated with an acrylic pressure sensitive adhesive, and with a release liner, of an overall thickness of not more than 110 μm 0 %—31.12.2020ex3919908065Self-adhesive film with a thickness of 40 μm or more, but not more than 400 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner0 %—31.12.2020ex3919908070Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad0 %—31.12.2020ex3919908082

Reflecting film consisting of: a polyurethane layer, a glass microspheres layer, a metallised aluminium layer, and an adhesive, covered on one or both sides with a release liner, whether or not a poly(vinyl chloride) layer, a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use 0 %—31.12.2020 ex39199080 ex90019000 83 33 Reflector or diffuser sheets, in rolls: for protection against ultraviolet or infra-red heat radiation, to be affixed to windows, or for equal transmission and distribution of light, intended for LCD modules 0 %—31.12.2022ex3920102520Film of polyethylene, of a kind used for typewriter ribbon0 %—31.12.2023ex3920102830 Printed embossed film: of polymers of ethylene having a gravity of 0,94 g/cm3 or more of a thickness of 0,019 mm ± 0,003 mm with permanent graphics consisting of two different alternating designs whose individual length is 525 mm or more 0 %—31.12.2019 ex3920102891 Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics: is repetitive and equally spaced along the length of the film is equally and visibly aligned when viewed from the back or front of the film 0 %—31.12.2023ex3920104040 Tubular layered film predominately of polyethylene: consisting of a tri-layer barrier with a core layer of ethylene vinyl alcohol covered on either side with a layer of polyamide, covered on either side with at least one layer of polyethylene, having a total thickness of 55 μm or more, having a diameter of 500 mm or more but not more than 600 mm 0 %—31.12.2020ex3920108930 Ethylene vinyl acetate (EVA) film with: a raised relief surface with embossed undulations, and a thickness of more than 0,125 mm 0 %—31.12.2021ex3920108940Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0,8 mm or more but not more than 1,2 mm0 %—31.12.2021ex3920202140 Sheets of biaxially - oriented polypropylene film: with the thickness of not more than 0,1 mm, printed on both sides with specialised coatings to allow banknote security printing 0 %—31.12.2021ex3920202960 Mono-axial oriented film, of a total thickness of not more than 75μm, consisting of three or four layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having: a tensile strength in the machine direction of 120 MPa or more but not more than 270 MPa, and a tensile strength in the transverse direction of 10 MPa or more but not more than 40 MPa, as determined by test method ASTM D882/ISO 527-3 0 %—31.12.2023ex3920202970 Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having:

a thickness of 55 μm or more but not more than 97 μm, a tensile modulus in the machine direction of 0,30 GPa or more but not more than 1,45 GPa, and a tensile modulus in the transverse direction of 0,20 GPa or more but not more than 0,70 GPa 0 %—31.12.2019 ex3920202994 Co-extruded trilayer film, each layer containing a mixture of polypropylene and polyethylene, containing not more than 3 % by weight of other polymers, whether or not containing titanium dioxide in the core layer, of an overall thickness of not more than 70 μm 0 %—31.12.2022ex3920431092Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 μm or more but not more than 80 μm, containing 30 or more but not more than 40 parts of plasticiser to 100 parts of poly(vinyl chloride)0 %—31.12.2023 ex39204310 ex39204910 94 93 Film of a specular gloss of 70 or more, measured at an angle of 60° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26 mm or more but not more than 1,0 mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1000 mm or more but not more than 1450 mm, for use in the manufacture of goods of heading 94030 %—31.12.2023ex3920431095Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet0 %—31.12.2023ex3920491030 Film of a (polyvinyl)chloride-copolymer: containing by weight 45 % or more of fillers on a support 0 %—31.12.2023ex3920510020Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not more than 19 mm0 %—31.12.2023ex3920510030Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm0 %—31.12.2023ex3920510040Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690)0 %—31.12.2023 ex39206219 ex39206290 05 10 Poly(ethylene terephthalate) film in rolls: with a thickness of 0,335 mm or more but not more than 0,365 mm, and coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm 0 %—31.12.2022ex3920621908 Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 μm, either: only dyed in the mass, or dyed in the mass and metallised on one side 0 %—31.12.2023 ex3920621912Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material0 %—31.12.2023ex3920621918Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material0 %—31.12.2023ex3920621920Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers0 %—31.12.2023ex3920621938Poly(ethylene terephthalate) film, of a thickness of not more than 12 μm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm0 %—31.12.2023ex3920621948

Sheets or rolls of poly(ethylene terephthalate): coated on both sides with a layer of epoxy acrylic resin, of a total thickness of 37 μm (± 3 μm) 0 %—31.12.2020ex3920621952Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10000 ohms (per square) (as determined by the ASTM D 257-99 method)0 %—31.12.2023ex3920621960 Poly(ethylene terephthalate) film: of a thickness of not more than 20 μm, coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2μm 0 %—31.12.2022ex3920621976 Transparent poly(ethylene terephthalate) film: coated on both sides with layers of organic substances on the basis of acryl of a thickness of 7 nm or more but not more than 80 nm, with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, with a light transmission of more than 93 %, with a haze value of not more than 1,3 %, with a total thickness of 10 μm or more but not more than 350 μm, with a width of 800 mm or more but not more than 1600 mm 0 %—31.12.2023 ex3920690020Film of poly(ethylene naphthalene-2,6-dicarboxylate)0 %—31.12.2023ex3920690050 Monolayer, biaxially oriented film: composed of more than 85 % by weight of poly(lactic acid) and not more than 10,50 % by weight of modified poly(lactic acid) based polymer, poly-glycol ester and talc, having a thickness of 20 μm or more but not more than 120 μm, biodegradable and compostable (as determined by the method EN 13432) 0 %—31.12.2019ex3920690060 Monolayer, transverse oriented, shrink film: composed of more than 80 % by weight of poly(lactic acid) and not more than 15,75 % by weight of additives of modified poly(lactic acid), having a thickness of 45 μm or more but not more than 50 μm, biodegradable and compostable (as determined by the method EN 13432) 0 %—31.12.2019ex3920791010Sheets of painted vulcanised fibre-board with a thickness of not more than 1,5 mm0 %p/st31.12.2019ex3920910051Poly(vinyl butyral) film containing by weight 25 % or more but not more than 28 % of tri-isobutyl phosphate as a plasticiser0 %—31.12.2019ex3920910052 Poly(vinyl butyral) film: containing by weight 26 % or more but not more than 30 % of triethyleneglycol bis(2-ethyl hexanoate) as a plasticiser, with a thickness of 0,73 mm or more but not more than 1,50 mm 0 %—31.12.2019ex3920910091Poly(vinyl butyral) film having a graduated coloured band3 %—31.12.2023ex3920910093 Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics: a visible light transmission of 50 % or more, coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),

a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mm 0 %—31.12.2019ex3920910095Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29 % or more but not more than 31 % of 2,2′-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser0 %—31.12.2023ex3920992840 Polymer film containing the following monomers: poly (tetramethylene ether glycol), bis (4-isocyanotocyclohexyl) methane, 1,4-butanediol or 1,3-butanediol, with a thickness of 0,25 mm or more but not more than 5,0 mm, embossed with a regular pattern on one surface, and covered with a release sheet 0 %—31.12.2023 ex3920992845 Transparent polyurethane film metallised on one side: with a gloss of more than 90 degrees according to ASTM D2457 covered on the metallised side with a heat bonding adhesive layer consisting of polyethylene/polypropylene copolymer covered on the other side with a protective poly(ethylene terephthalate) film with a total thickness of more than 204 μm but not more than 244 μm 0 %—31.12.2019ex3920992850Thermoplastic polyurethane film, of a thickness of 250 μm or more but not more than 350 μm, covered on one side with a removable protective film0 %—31.12.2021ex3920992865 Matt, thermoplastic polyurethane foil in rolls with: a width of 1640 mm (± 10 mm), a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D2457), a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287), a thickness of more than 365 μm but not more than 760 μm, a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D2240)), an elongation to break of 470 % (as determined by the method: EN ISO 527) 0 %m231.12.2019ex3920992870 Sheets on rolls, consisting of epoxy resin, with conducting properties, containing: microspheres with a coating of metal, whether or not alloyed with gold, an adhesive layer, with a protective layer of silicone or poly(ethylene terephthalate) on one side, with a protective layer of poly(ethylene terephthalate) on the other side, and with a width of 5 cm or more but not more than 100 cm, with a length of not more than 2000 m 0 %—31.12.2021ex3920992875 Thermoplastic polyurethane foil in rolls with: a width of more than 900 mm but not more than 1016 mm, a matt finish, a thickness of 0,43 mm (± 0,03 mm), an elongation to break of 420 % or more but not more than 520 %, a tensile strength of 55 N/mm2 (± 3) (as determined by the method EN ISO 527) a hardness of 90 (± 4) (as determined by the method: Shore A [ASTM D2240]), wrinkle inside (waves) of 6,35 mm, a flatness of 0,025 mm 0 %m231.12.2019 ex3920995925Poly(1-chlorotrifluoroethylene) film0 %—31.12.2023ex3920995955Ion-exchange membranes of fluorinated plastic material0 %—31.12.2023ex3920995965Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not more than 90 μm, a tensile strength at break of 20 MPa or more but not more than 55 MPa and an elongation at break of 250 % or more but not more than 900 %0 %—31.12.2023ex3920995970

Tetrafluoroethylene film, put up in rolls, with: a thickness of 50 μm, a melting point of 260 °C, and a specific gravity of 1,75 (ASTM D792), for use in the manufacture of semiconductor devices 0 %—31.12.2021ex3920995975 Film of fluorinated ethylene propylene resin (CAS RN 25067-11-2) with: a thickness of 0,010 mm or more but not more than 0,80 mm, a width of 1219 mm or more but not more than 1575 mm, and a melting point of 252 °C (measured according ASTM D-3418) 0 %—31.12.2023ex3920999020Anisotropic conductive film, in rolls, of a width of 1,2 mm or more but not more than 3,15 mm and a maximum length of 300 m, used for joining electronic components in the production of LCD or plasma displays0 %—31.12.2023ex3921131010Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,100920 %m331.12.2019ex3921131020 Rolls of open-cell polyurethane foam: with a thickness of 2,29 mm (± 0,25 mm), surface-treated with a foraminous adhesion promoter, and laminated to a polyester film and a layer of textile material 0 %—31.12.2022 ex3921190030 Blocks with cellular structure, containing by weight: polyamide-6 or poly(epoxy anhydride) 7 % or more but not more than 9 % of polytetrafluorethylene if present 10 % or more but not more than 25 % of inorganic fillers 0 %—31.12.2023ex3921190035 Multilayer film consisting of: 30 % or more but not more than 60 % of a microporous polypropylene layer (CAS RN 9003 07-0), 20 % or more but not more than 40 % of a microporous polyethylene layer (CAS RN 9002-88-4), and 20 % or more but not more than 40 % of a boehmite layer/coating (CAS RN 1318-23-6), for use in the manufacture of lithium-ion batteries 0 %—31.12.2022ex3921190040 Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with: a width of 98 mm or more but not more than 170 mm, a thickness of 15 μm or more but not more than 36 μm, of a kind used for the manufacture of alkaline battery separators 0 %—31.12.2020ex3921190050 Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with: a total thickness of more than 0,05 mm but not more than 0,20 mm, a water entry pressure between 5 and 200 kPa according to ISO 811, and an air permeability of 0,08 cm3/cm2/s or more according to ISO 5636-5 0 %—31.12.2021ex3921190060 Multi-porous multilayer separator foil with: one microporous polyethylene layer between two microporous polypropylene layers and whether or not containing a coating of aluminium oxide on both sides, a width of 65 mm or more but not more than 170 mm, a total thickness of 0,01 mm or more but not more than 0,03 mm, a porosity of 0,25 or more but not more than 0,65 0 %m231.12.2022ex3921190070 Microporous membranes of expanded Polytetrafluoroethylene (ePTFE) in rolls, having: a width of 1600 mm or more but not more than 1730 mm, and a membrane thickness of 15 μm or more, but not more than 50 μm, for use in the manufacture of a bi-component ePTFE membrane

0 %—31.12.2022 ex3921190080 Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with: zero transversal production direction (TD) shrinkage, a total thickness of 10 μm or more but not more than 50 μm, a width of 15 mm or more but not more than 900 mm, a length of more than 200 m but not more than 3000 m, and an average pore size between 0,02 μm and 0,1 μm 0 %—31.12.2022ex3921190093Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment0 %—31.12.2023ex3921190095Film of polyethersulfone, of a thickness of not more than 200 μm0 %—31.12.2023ex3921901010Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres0 %—31.12.2023ex3921901020Poly(ethylene terephthalate) film, laminated on one side or on both sides with a layer of unidirectional nonwoven poly(ethylene terephthalate) and impregnated with polyurethane or epoxide resin0 %—31.12.2023ex3921901030 Multilayer film consisting of: a poly(ethylene terephthalate) film with a thickness of more than 100 μm but not more than 150 μm, a primer of phenolic material with a thickness of more than 8 μm but not more than 15 μm, an adhesive layer of a synthetic rubber with a thickness of more than 20 μm but not more than 30 μm, and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35 μm but not more than 40 μm 0 %m231.12.2023 ex39219055 ex70194000 ex70194000 25 21 29 Prepreg sheets or rolls containing polyimide resin0 %—31.12.2019ex3921905535Glass fiber impregnated with epoxy resin for use in the manufacture of smart cards0 %m231.12.2023 ex3921905540 Three layered fabric sheet, in rolls: comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta, coated on both sides with polyamide, of a total thickness not more than 135 μm, of a total weight not more than 80 g/m2 0 %—31.12.2020ex3921905550Glass fiber-reinforced sheets of reactive, halogen-free epoxid resin with hardener, additives and inorganic fillers for use in encapsulating semiconductor systems0 %m231.12.2020ex3921906030 Heat-, infra- and UV insulating poly(vinyl butyral) film: laminated with a metal layer with a thickness of 0,05 mm (± 0,01 mm), containing by weight 29,75 % or more but not more than 40,25 % of triethyleneglycol di (2-ethyl hexanoate) as plasticiser, with a light transmission of 70 % or more (as determined by the ISO 9050 standard), with an UV transmission of 1 % or less (as determined by the ISO 9050 standard), with a total thickness of 0,43 mm (± 0,043 mm) 0 %m231.12.2019 ex39219060 ex54077100 ex59039099 35 30 30 Ion-exchange membranes based on a fabric coated on both sides with fluorinated plastic material, for use in chlor-alkali electrolytic cells0 %—31.12.2023ex3923109010 Photomask or wafer compacts: consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties,

having non porous, abrasion resistant or impact resistant surface properties, fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage, and with or without a gasket seal, of a kind used in the photolithography or other semiconductor production to house photomasks or wafers 0 %—31.12.2021ex3926300020Plastic logo of the automobile manufacturer with mounting brackets on the back side, whether or not chromed, for use in the manufacture of goods of Chapter 870 %—31.12.2021 ex39263000 ex39269097 30 34 Electroplated interior or exterior decorative parts consisting of: a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, layers of copper, nickel and chromium, for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705 0 %p/st31.12.2022 ex3926909220Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on one side with plastic material0 %—31.12.2023ex3926909230Silicone shell for breast implant0 %—31.12.2021ex3926909710Microspheres of a polymer of divinylbenzene, of a diameter of 4,5 μm or more but not more than 80 μm0 %—31.12.2023ex3926909715Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems0 %—31.12.2023ex3926909723Plastic cover with clips for the exterior rear-view mirror of motor vehicles0 %p/st31.12.2020ex3926909725Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3 μm or more but not more than 4,6 μm0 %—31.12.2023ex3926909727Gasket of polyethylene foam, intended to fill-up the space between the body of a motor vehicle and the base of a rear-view mirror0 %—31.12.2023ex3926909730 Parts of car radio and car air-conditioner front panels: of acrylonitrile-butadiene-styrene with or without polycarbonate, coated with a copper, a nickel and a chrome layers, with a total thickness of coating of 5,54 μm or more but not more than 49,6 μm 0 %—31.12.2021ex3926909733Housings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene or polycarbonate, of a kind used for the manufacture of remote controls0 %p/st31.12.2019ex3926909750Knob of car radio front panel, made of Bisphenol A-based polycarbonate, in immediate packings of not less than 300 pieces0 %p/st31.12.2023ex3926909777Silicone decoupling ring with an inner diameter of 14,7 mm or more but no more than 16,0 mm, in immediate packings of 2500 pieces or more, of a kind used in car parking aid sensor systems0 %p/st31.12.2021ex4007000010Siliconated vulcanised rubber thread and cord0 %—31.12.2023ex4009420020 Rubber brake hose with: textile strings, a wall thickness of 3,2 mm, a metal hollow terminal pressed on both ends, and

one or more mounting brackets, of kind used in the manufacture of goods of Chapter 87 0 %—31.12.2020 ex40103100 ex40103300 ex40103900 10 10 10 Vulcanized rubber endless transmission belt of trapezoidal cross-section (V-belts) with longitudinal V-ribbed pattern on the inner side for use in the manufacture of goods of Chapter 870 %—31.12.2021ex4016930020 Gasket made of vulcanised rubber (ethylene-propylene-diene monomers), with permissible outflow of the material in the place of mold split of not more than 0,25 mm, in the shape of a rectangle: with a length of 72 mm or more but not more than 825 mm; with a width of 18 mm or more but not more than 155 mm 0 %—31.12.2020ex4016995710 Air intake hose for air supply to the combustion part of the engine comprising at least: one flexible rubber hose, one plastic hose, and metal clips, whether or not a resonator, for use in the manufacture of goods of Chapter 87 0 %p/st31.12.2021ex4016995720Rubber bumper strip with a silicone coating of a length not more than 1200 mm and with at least five plastic clips for use in the manufacture of goods of Chapter 870 %p/st31.12.2021ex4016995730 Pin boot of a brake calliper made of vulcanized rubber with: an inner diameter of not less than 5 mm and an outer diameter of not more than 35 mm, a height of 15 mm or more, but not more than 40 mm, and a ribbed design, for use in the manufacture of goods of Chapter 87 0 %—31.12.2022ex4016999730Tyre moulding bladder0 %—31.12.2021ex4104411910Buffalo leather, split, chrome tanned synthetic retanned (crust), dry0 %—31.12.2022 41051000 41053090 Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 41140 %—31.12.2023 41062100 41062290 Goat or kid skin leather, without hair on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 41140 %—31.12.2023 41063100 41063200 41064090 41069200 Leather of other animals, without hair on, not further prepared than tanned, other than leather of heading 41140 %—31.12.2023ex4408393010 Okoume veneer sheets: of a length of 1270 mm or more, but not more than 3200 mm, of a width of 150 mm or more, but not more than 2000 mm, of a thickness of 0,5 mm or more, but not more than 4 mm, not sanded, and not planed 0 %—31.12.2023 ex44129940 ex44129950 ex44129985 10 10 20 Laminated wood consisting of two layers of sheets for veneering: a width of 210 mm or more but not more than 320 mm, a length of 297 mm or more but not more than 450 mm, a thickness or 0,45 mm or more but not more than 0,8 mm, for use in the manufacture of products falling within heading 4420, 4421, 4820, 4909 or 4911 0 %—31.12.2021ex5004001010Silk yarn (other than yarn spun from silk waste) not put up for retail sale, unbleached, scoured or bleached, entirely of silk0 %—31.12.2021 ex50050010 ex50050090 10 10 Yarn spun entirely from silk waste (noil), not put up for retail sale0 %—31.12.202352081110Fabrics for the manufacture of bandages, dressings and medical gauzes5.2 %—31.12.2023ex5311009010

Plain-woven fabric of paper yarns glued on a tissue paper layer: with a weight of 230 g/m2 or more but not more than 280 g/m2, and cut into rectangles with a side length of 40 cm or more but not more than 140 cm 0 %—31.12.2022ex5311009020 Sisal cloth in rolls with: a length of 20 metres or more but not more than 30 metres, and a maximum width of 2,5 metres, for use in the production of Stainless Steel Kitchenware 0 %—31.12.2023ex5402470020 Bicomponent monofilament yarn of not more than 30 dtex, consisting of: a poly(ethylene terephthalate) core, and an outer layer of a copolymer of poly(ethyleneterephthalate) and poly(ethyleneisophthalate), for use in the manufacture of filtration fabrics 0 %—31.12.2020 ex5402490030Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures0 %—31.12.2023ex5402490050Non-textured filament yarn of poly(vinyl alcohol)0 %—31.12.2023ex5402490070Synthetic filament yarn, single, containing by weight 85 % or more of acrylonitrile, in the form of a wick containing 1000 continuous filaments or more but not more than 25000 continuous filaments, of a weight per metre of 0,12 g or more but not more than 3,75 g and of a length of 100 m or more, for the manufacture of carbon-fibre yarn0 %m31.12.2023ex5403390010Biodegradable (norm EN 14995) monofilament of not more than 33 dtex, containing at least 98 % by weight polylactide (PLA), for use in the manufacture of filtration fabrics for the food industry0 %—31.12.2020ex5404190050Monofilaments of polyester or poly(butylene terephthalate), with cross-sectional dimension of 0,5 mm or more but not more than 1 mm, for use in the manufacture of zippers0 %—31.12.2023ex5404909020Strip of polyimide0 %—31.12.2023ex5407100010Textile fabric, consisting of warp filament yarns of polyamide-6,6 and weft filament yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4′–oxybis (phenyleneamine)0 %—31.12.2022 ex55031100 ex56013000 10 40 Synthetic staple fibres of a copolymer of terephthalic acid, p-phenylenediamine and 3,4′-oxybis(phenyleneamine), of a length of not more than 7 mm0 %—31.12.2023 ex55039000 ex55069000 ex56013000 20 10 10 Poly(vinyl alcohol) fibres, whether or not acetalized0 %—31.12.2023ex5503900030Trilobal poly(thio-1,4-phenylene) fibres0 %—31.12.2019 ex56031110 ex56031190 ex56031210 ex56031290 ex56039110 ex56039190 ex56039210 ex56039290 10 10 10 10 10 10 10 10 Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles: of a thickness of 200 μm or more but not more than 280 μm, and of a weight of 20 g/m2 or more but not more than 50 g/m2 0 %m231.12.2023 ex56031290 ex56031390 ex56031490 ex56039290 ex56039390 ex56039490 30 30 10 60 40 30 Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles0 %—31.12.2023ex5603129050 Non-woven: weighing 30 g/m2 or more, but not more than 60 g/m2, containing fibres of polypropylene or of polypropylene and polyethylene,

whether or not printed, with: on one side, 65 % of the total surface area having circular bobbles of 4mm in diameter, consisting of anchored, elevated un-bonded curly fibres, suitable for the engagement of extruded hook materials, and the remaining 35 % of the surface area being bonded, and on other side a smooth untextured surface, for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles 0 %m231.12.2022 ex56031290 ex56031390 60 60 Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not more than 80 g/m2 and an air resistance (Gurley) of 8 seconds or more but not more than 36 seconds (as determined by the ISO 5636/5 method)0 %m231.12.2023 ex56031290 ex56031390 ex56039290 ex56039390 70 70 40 10 Non-wovens of polypropylene: with a melt blown layer, laminated on each side with spunbonded filaments of polypropylene, with a weight of not more than 150 g/m2, in the piece or simply cut into squares or rectangles, and not impregnated 0 %m231.12.2023ex5603131020 Non-woven of spunbonded polyethylene, with a coating, of a weight of more than 80 g/m2 but not more than 105 g/m2, and an air resistance (Gurley) of 8 seconds or more but not more than 75 seconds (as determined by the ISO 5636/5 method) 0 %m231.12.2020ex5603149040 Non-wovens, consisting of poly(ethylene terephthlate) spun bonded media: of weight of 160 g/m2 or more but not more than 300 g/m2, whether or not laminated on one side with a membrane or a membrane and aluminium, of a kind used for the manufacture of industrial filters 0 %m231.12.2023 ex56039290 ex56039390 20 20 Non-wovens consisting of a meltblown central layer of a thermoplastic elastomer laminated on each side with spunbonded filaments of polypropylene0 %—31.12.2023 ex56039290 ex56039490 70 40 Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene0 %—31.12.2023 ex56039290 ex56039390 80 50 Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each side with polyolefin filaments: a weight of 25 g/m2 or more but not more than 150 g/m2, in the piece or simply cut into squares or rectangles, not impregnated, with cross-directional or machine-directional stretch properties, for use in the manufacture of infant/child care products 0 %m231.12.2021ex5603939060 Nonwovens made of polyester fibres: with a weight of 85 g/m2, with a constant thickness of 95 μm (± 5 μm), neither coated nor covered, in 1 m wide rolls of 2000m to 5000 m length, suitable for the coating of membranes in the manufacture of osmosis and reverse osmosis filters 0 %m231.12.2023ex5603949020Acrylic fibre rods, having a length of not more than 50 cm, for the manufacture of pen tips0 %—31.12.2023ex5607509010Unsterilised twine of poly(glycolic acid) or of poly(glycolic acid) and its copolymers with lactic acid, plaited or braided, with an inner core, for the manufacture of surgical sutures0 %—31.12.2019ex5803001091Gauze of cotton, of a width of less than 1500 mm0 %—31.12.2023ex5903209020

Two layers′ plastic-laminated textile fabric with: one layer consisting of knitted or crocheted polyester textile fabric, other layer consisting of polyurethane foam, a weight of 150 g/m2 or more, but not more than 500 g/m2, a thickness of 1 mm or more, but not more than 5 mm, for use in the manufacture of the retractable roof of motor vehicles 0 %—31.12.2021 ex5906999010Rubberised textile fabric, consisting of warp yarns of polyamide-6,6 and weft yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4′-oxybis(phenyleneamine)0 %—31.12.2023ex5907000010Textile fabrics, coated with adhesive in which are embedded spheres of a diameter of not more than 150 μm0 %—31.12.2021 ex59119099 ex84219990 30 92 Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more0 %—31.12.2023ex5911909940Multi-layered non-woven polyester polishing pads, impregnated with polyurethane0 %—31.12.2019ex5911909950Loudspeaker vibration damper, made from round, corrugated, flexible and cut-to-size tissue of textile fibres of polyester, cotton or aramid or a combination hereof, of a kind used in car loudspeakers0 %—31.12.2022ex6804210020 Discs: of synthetic diamonds which are agglomerated with a metal alloy, ceramic alloy or plastic alloy, having a self-sharpening effect by constant release of the diamonds, suitable for abrasive cutting of wafers, whether or not containing a hole in the centre, whether or not on a support, with a weight of not more than 377 g per piece, and with an external diameter of not more than 206 mm 0 %p/st31.12.2019ex6805300010Probe tips cleaning material consisting of a polymer matrix containing abrasive particles mounted on a substrate for use in the manufacture of semiconductors0 %—31.12.2021ex6813890020Friction material, of a thickness of less than 20 mm, not mounted, for use in the manufacture of friction components0 %—31.12.2023ex6814100010Agglomerated mica with a thickness of not more than 0,15 mm, on rolls, whether or not calcined, whether or not reinforced with aramid fibres0 %—31.12.2023 ex6903909020Silicon carbide reactor tubes and holders, of a kind used for insertion into diffusion and oxidation furnaces for production of semiconductor materials0 %—31.12.2023ex6909190020Silicon nitride (Si3N4) rollers or balls0 %—31.12.2020ex6909190025Ceramic proppants, containing aluminium oxide, silicon oxide and iron oxide0 %—31.12.2023ex6909190030Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall volume of not more than 65 l, having, per cm2 of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end0 %—31.12.2023

ex69091900 ex69149000 50 20 Ceramic articles made of continuous filaments of ceramic oxides, containing by weight: 2 % or more of diboron trioxide, 28 % or less of silicon dioxide, and 60 % or more of dialuminium trioxide 0 %—31.12.2023ex6909190060Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total volume of not more than 65 litres, having, per cm2 of the surface of the cross section one or more closed channels at the tail end0 %—31.12.2023ex6909190070Supports for catalysts or filters, consisting of porous ceramics made primarily from oxides of aluminium and titanium; with a total volume of not more than 65 litres and at least one duct (open on one or both ends) per cm2 of cross section0 %—31.12.2023ex6914900030Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm0 %—31.12.2019ex7004908010 Alkali-aluminosilicate drawn flat glass sheet with: a scratch proof coating of a thickness of 45 μm (+/– 5 μm), a total thickness of 0,45 mm or more but not more than 1,1 mm, a width of 300 mm or more but not more than 3210 mm, a length of 300 mm or more but not more than 2000 mm, a visible light transmission of 90 % or more, an optical distortion of 55° or more 0 %—31.12.2020ex7006009025 Glass wafer made of borosilicate float glass with a total thickness variation of 1 μm or less, and laser-engraved 0 %p/st31.12.2019 ex7009100030 Layered glass with mechanical dimming ability by different angles of incident light comprising: whether or not a layer of chrome, a break-resistance adhesive tape or hot-melt adhesive, and a release film on the front side and protective paper at the back side, of a kind used for interior rear-view mirrors of vehicles 0 %p/st31.12.2019ex7009100040 Electrochromic self-dimming inside rear-view mirror, consisting of: a mirror support a plastic casing, and an integrated circuit, for use in the manufacture of motor vehicles of Chapter 87 0 %—31.12.2020ex7009100050 Unfinished electro-chromic auto-dimming mirror for motor vehicle rear-view mirrors: whether or not equipped with plastic backing plate, whether or not equipped with a heating element, whether or not equipped with Blind Spot Module (BSM) display 0 %—31.12.2022ex7009910010 Unframed glass mirrors with: a length of 1516 mm (± 1 mm); a width of 553 mm (± 1 mm); a thickness of 3 mm (± 0,1 mm); the back of the mirror covered with protective polyethylene (PE) film, with a thickness of 0,11 mm or more but not more than 0,13 mm; a lead content of not more than 90 mg/kg; and a corrosion resistance of 72 hours or more according to ISO 9227 salt spray test 0 %p/st31.12.2020ex7014000010Optical elements of glass (other than those of heading 7015), not optically worked, other than signalling glassware0 %—31.12.2023 ex70191200 ex70191200 02 22 Rovings, measuring 650 tex or more but not more than 2500 tex, coated with a layer of polyurethane whether or not mixed with other materials0 %—31.12.2023

ex70191200 ex70191200 05 25 Rovings ranging from 1980 to 2033 tex, composed of continuous glass filaments of 9 μm (± 0,5 μm)0 %—31.12.2022ex7019191010Yarn of 33 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 3,5 μm or of 4,5 μm, in which filaments of a diameter of 3 μm or more but not more than 5,2 μm predominate, other than those treated so as to improve their adhesion to elastomers0 %—31.12.2023 ex7019191015S-glass yarn of 33 tex or a multiple of 33 tex (± 13 %) made from continuous spun-glass filaments with fibres of a diameter of 9 μm (– 1 μm / + 1,5 μm)0 %—31.12.2022ex7019191020Yarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate0 %—31.12.2020ex7019191025Yarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate0 %—31.12.2020ex7019191030Yarn of E-glass of 22 tex (± 1,6 tex), obtained from continuous spun-glass filaments of a nominal diameter of 7 μm, in which filaments of a diameter of 6,35 μm or more but not more than 7,61 μm predominate0 %—31.12.2019ex7019191050Yarn of 11 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments, containing 93 % by weight or more of silicon dioxide, of a nominal diameter of 6 μm or 9 μm, other than those treated0 %—31.12.2022ex7019191055 Glass cord impregnated with rubber or plastic, obtained from K- or U-glass filaments, made up of: 9 % or more but not more than 16 % of magnesium oxide, 19 % or more but not more than 25 % of aluminium oxide, 0 % or more but not more than 2 % of boron oxide, without calcium oxide, coated with a latex comprising at least a resorcinol- formaldehyde resin and chlorosulphonated polyethylene 0 %—31.12.2019 ex70191910 ex70199000 60 30 High modulus glass cord (K) impregnated with rubber, obtained from twisted high modulus glass filament yarns, coated with a latex comprising a resorcinol-formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrile-butadiene rubber (HNBR)0 %—31.12.2023 ex70191910 ex70199000 70 20 Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR)0 %—31.12.2023 ex70191910 ex70199000 80 40 Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde resin and chlorosulphonated polyethylene0 %—31.12.2019ex7019390050Non-woven product of non-textile glass fibre, for the manufacture of air filters or catalysts0 %—31.12.2021 ex70194000 ex70194000 11 19 Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30 °C and 120 °C (measured according to IPC-TM-650) of:

10 ppm per °C or more but not more than 12 ppm per °C in the length and width, and 20 ppm per °C or more but not more than 30 ppm per °C in the thickness, with a glass transition temperature of 152 °C or more but not more than 153 °C (measured according IPC-TM-650) 0 %—31.12.2023ex7019900010Non-textile glass fibres in which fibres of a diameter of less than 4,6 μm predominate0 %—31.12.2023 ex70200010 ex76169990 10 77 Television pedestal stands with or without bracket for fixation to and stabilization of television cabinet case/body0 %p/st31.12.2021ex7020001020 Raw material for optical elements of fused silicon dioxide with: a thickness of 10 cm or more but not more than 40 cm, and a weight of 100 kg or more 0 %p/st31.12.2022ex7201101110Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm0 %—31.12.2021ex7201103010Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1 % of silicon0 %—31.12.202172025000Ferro-silico-chromium0 %—31.12.2023ex7202998010 Ferro-dysprosium, containing by weight: 78 % or more of dysprosium, and 18 % or more but not more than 22 % of iron 0 %—31.12.2020ex7315119010Roller type steel timing chain with a fatigue limit of 2 kN at 7000 rpm or more for use in the manufacture of engines of motor vehicles0 %—31.12.2022ex7318190030Connecting rod for the master brake cylinder with screw threads on both ends for use in the manufacture of goods of Chapter 870 %p/st31.12.2021ex7318240030 Restraint joint elements: of martensitic stainless steel according to specification 17-4PH, injection moulded, with a rockwell hardness of 38 (± 1) or 53 (+ 2/– 1), measuring 9 mm × 5,5 mm × 6,5 mm or more, but not more than 35 mm × 17 mm × 8 mm, of a kind used for restraint joints for tubes and pipes 0 %—31.12.2023 ex7320901091 Flat spiral spring of tempered steel, with: a thickness of 2,67 mm or more, but not more than 4,11 mm, a width of 12,57 mm or more, but not more than 16,01 mm, a torque of 18,05 Nm or more, but not more than 73,5 Nm, an angle between the free position and the nominal position in exercise of 76° or more, but not more than 218°, for use in the manufacture of tensioners for power transmission belts, for internal combustion engines 0 %p/st31.12.2023ex7325991020Anchor head of hot dipped galvanized ductile cast iron of the kind used in the production of earth anchors0 %p/st31.12.2019ex7326200020Metal fleece, consisting of a mass of stainless steel wires of diameters of 0,001 mm or more but not more than 0,070 mm, compacted by sintering and rolling0 %—31.12.2021ex7326909240 Steel nozzle shell with integral flange in one piece open-die forged from 4 castings, worked and machined, with: a diameter of 5752 mm or more but not more than 5758 mm, a height of 3452 mm or more but not more than 3454 mm, a total weight 167875 kg or more but not more than 168125 kg, of a kind used for the fabrication of a nuclear reactor vessel

0 %p/st31.12.2022ex7326909840 Iron and steel weights whether or not with parts of other material whether or not with parts of other metals whether or not surface treated whether or not printed of a kind used for the production of remote controls 0 %—31.12.2020ex7326909850 Surface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor vehicles: with a chrome coating, of a diameter of 11 mm or more, but not more than 28 mm, of a length of 80 mm or more, but not more than 600 mm, with a threaded end or a mandrel for resistance welding 0 %—31.12.2022 ex74091900 ex74102100 10 70 Plates or sheets: with at least one layer of woven glass fibre, impregnated with a fire- retardant artificial or synthetic resin with a glass transition temperature (Tg) of more than 130 °C as measured according to IPC-TM-650, method 2.4.25, coated on one or both sides with a copper film with a thickness of not more than 3,2 mm, and containing at least one of the following: poly(tetrafluoroethylene) (CAS RN 9002-84-0), poly(oxy-(2,6-dimethyl)-1,4-phenylene) (CAS RN 25134-01-4), epoxy resin having a thermal expansion of not more than 10 ppm in length and width and not more than 25 ppm in height, for use in the manufacture of circuit boards 0 %—31.12.2022 ex74101100 ex85079080 ex85459090 10 60 30 Roll of laminate foil of graphite and copper, with: a width of 610 mm or more but not more than 620 mm, and a diameter of 690 mm or more but not more than 710 mm, for use in the manufacture of lithium-ion electric rechargeable batteries 0 %—31.12.2021ex7410210010Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil0 %—31.12.2023ex7410210020Foils, rolls composed of one layer of glass epoxy of 100 μm colaminated with refined copper foil on one or two sides of 35 μm with a tolerance of 10 % for use in the production of smart cards0 %m231.12.2023ex7410210030Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil0 %—31.12.2023ex7410210040 Sheet or plates: consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or consisting of multiple layers of paper, impregnated with phenolic resin, coated on one or both sides with a copper film with a maximum thickness of 0,15 mm 0 %—31.12.2023ex7410210050 Plates: consisting of at least one layer of fibreglass fabric impregnated with epoxide resin, covered on one or both sides with copper foilwith a thickness of not more than 0,15mm, and with a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10GHz, as measured according to IPC-TM-650 0 %—31.12.2023 ex74130000 ex85189000 20 45 Loudspeaker centering ring, consisting of one or more vibration dampers and minimum 2 non-insulated copper cables, therein woven or pressed of the kind used in car loudspeakers0 %—31.12.2022

ex74199990 ex76169990 91 60 Disc (target) with deposition material, consisting of molybdenum silicide: containing 1 mg/kg or less of sodium, and mounted on a copper or aluminium support 0 %—31.12.202376012020Slabs and billets of unwrought aluminium alloys4 %—31.12.2023ex7601202010Slabs and billets of aluminium alloy containing lithium0 %—31.12.2022 ex76042910 ex76061299 10 20 Sheets and bars of aluminium-lithium alloys0 %—31.12.2020ex7604291040 Bars and rods of aluminium alloys containing by weight: 0,25 % or more but not more than 7 % of zinc, and 1 % or more but not more than 3 % of magnesium, and 1 % or more but not more than 5 % of copper, and not more than 1 % of manganese, consistent with the material specifications AMS QQ-A-225, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process 0 %—31.12.2019ex7605190010Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not more than 0,117 mm0 %—31.12.2023ex7605290010 Wire of aluminium alloys containing by weight: 0,10 % or more but not more than 5 % of copper, and 0,2 % or more but not more than 6 % of magnesium, and 0,10 % or more but not more than 7 % of zinc, and not more than 1 % of manganese, consistent with the material specifications AMS QQ-A-430, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process 0 %m31.12.2019 ex76071190 ex76071190 47 57 Aluminium foil in rolls: having a purity of 99,99 % by weight, of a thickness of 0,021 mm or more but not more than 0,2 mm, with a width of 500 mm, with a surface oxide layer by 3 to 4 nm thick, and with a cubic texture of more than 95 % 0 %—31.12.2021ex7607119060 Plain aluminium foil with the following parameters: an aluminium content of 99,98 % or more a thickness of 0,070 mm or more but not more than 0,125 mm with a cubic texture of a kind used for high voltage etching 0 %—31.12.2021 ex76071990 ex85079080 10 80 Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with: a width of 595 mm or more but not more than 605 mm, and a diameter of 690 mm or more but not more than 710 mm, for use in the manufacture of cathodes for lithium-ion electric rechargeable batteries 0 %—31.12.2021ex7608208930 Seamless aluminium alloyed extruded tubes with: an outer diameter of 60 mm or more but not more than 420 mm, and a wall thickness of 10 mm or more but not more than 80 mm 0 %—31.12.2023ex7613000020Aluminium container, seamless, for compressed natural gas or compressed hydrogen, wholly embedded in an overwrap of epoxy-carbon fibres composite, of a storage capacity of 172 l (± 10 %) and an unfilled weight of not more than 64 kg0 %p/st31.12.2023 ex76169910 ex87089910 ex87089997 30 60 50 Aluminium engine bracket, with dimensions of: height of more than 10 mm but not more than 200 mm, width of more than 10 mm but not more than 200 mm,

length of more than 10 mm but not more than 200 mm, equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics: internal porosity not more than 1 mm, outer porosity not more than 2 mm, Rockwell hardness HRB 10 or more, of a kind used in the production of suspensions systems for engines in motor vehicles 0 %p/st31.12.2019 ex7616999015Honeycomb aluminium blocks of the type used in the manufacture of aircraft parts0 %p/st31.12.2023ex7616999025 Metallised film: consisting of eight or more layers of aluminium (CAS RN 7429-90-5) of a purity of 99,8 % or more, with an optical density of each aluminium layer of not more than 3,0, with each aluminium layer separated by a resin layer, on a carrier film of PET, and on rolls of up to 50000 metres in length 0 %—31.12.2019 ex76169990 ex84828000 ex88033000 70 10 40 Connecting components for use in the production of helicopter tail rotor shafts0 %p/st31.12.2021ex8101960010 Tungsten wire containing by weight 99 % or more of tungsten with: a maximum cross-sectional dimension of not more than 50 μm a resistance of 40 Ohm or more but not more than 300 Ohm at length of 1 metre of a kind used in the production of heated car front windows 0 %—31.12.2020ex8101960020 Tungsten wire containing by weight 99,95 % or more of tungsten, and with a maximum cross-sectional dimension of not more than 1,02 mm 0 %—31.12.2022ex8102100010 Molybdenum powder with: a purity by weight of 99 % or more, and a particle size of 1,0 μm or more, but not more than 5,0 μm 0 %—31.12.2022ex8103909010 Tantalum sputtering target with: a copper-chromium alloy backing plate, a diameter of 312 mm, and a thickness of 6,3 mm 0 %p/st31.12.2019ex8104300035 Magnesium powder of purity by weight of more than 99,5 % with a particle size of 0,2 mm or more but not more than 0,8 mm 0 %—31.12.2020 ex8104900010Ground and polished magnesium sheets, of dimensions not more than 1500 mm × 2000 mm, coated on one side with an epoxy resin insensitive to light0 %—31.12.2023ex8105900010 Bars or wires made of cobalt alloy containing, by weight: 35 % (± 2 %) cobalt, 25 % (± 1 %) nickel, 19 % (± 1 %) chromium, and 7 % (± 2 %) iron, conforming to the material specifications AMS 5842, of a kind used in the aerospace industry 0 %—31.12.2023ex8108200010Titanium sponge0 %—31.12.2023ex8108200030Titanium powder of which 90 % by weight or more passes through a sieve with an aperture of 0,224 mm0 %—31.12.2023ex8108200040 Titanium alloy ingot, with a height of 17,8 cm or more, a length of 180 cm or more and a width of 48,3cm or more, a weight of 680 kg or more, containing alloy elements by weight of: 3 % or more but not more than 6 % of aluminium, 2,5 % or more but not more than 5 % of tin, 2,5 % or more but not more than 4,5 % of zirconium, 0,2 % or more but not more than 1 % of niobium, 0,1 % or more but not more than 1 % of molybdenum, 0,1 % or more but not more than 0,5 % of silicon 0 %—31.12.2020ex8108200055

Titanium alloy ingot: with a height of 17,8 cm or more, a length of 180 cm or more, a width of 48,3 cm or more, a weight of 680 kg or more, containing alloy elements by weight of: 3 % or more but not more than 7 % of aluminium, 1 % or more but not more than 5 % of tin, 3 % or more but not more than 5 % of zirconium, 4 % or more but not more than 8 % of molybdenum 0 %p/st31.12.2020 ex8108200060 Titanium alloy ingot: with a diameter of 63,5 cm or more and a length of 450 cm or more, a weight of 6350 kg or more, containing alloy elements by weight of: 5,5 % or more but not more than 6,7 % of aluminium, 3,7 % of more but not more than 4,9 % of vanadium 0 %—31.12.2020ex8108200070 Titanium alloy slab, with: a height of 20,3 cm or more, but not more than 23,3 cm, a length of 246,1 cm or more, but not more than 289,6 cm, a width of 40,6 cm or more, but not more than 46,7 cm, a weight of 820 kg or more but not more than 965 kg, containing alloy elements by weight of: 5,2 % or more but not more than 6,2 % of aluminium, 2,5 % or more but not more than 4,8 % of vanadium 0 %p/st31.12.2022ex8108300010Waste and scrap of titanium and titanium alloys, except those containing by weight 1 % or more but not more than 2 % of aluminium0 %—31.12.2023ex8108903010Titanium alloy rods complying with standard EN 2002-1, EN 4267 or DIN 650400 %—31.12.2019ex8108903015 Rods and wire of an alloy of titanium with: a uniform solid cross-section in the form of a cylinder, with a diameter of 0,8 mm or more, but not more than 5 mm, an aluminium content by weight of 0,3 % or more, but not more than 0,7 %, a silicon content by weight of 0,3 % or more, but not more than 0,6 %, a niobium content by weight of 0,1 or more, but not more than 0,3 %, and an iron content by weight of not more than 0,2 % 0 %—31.12.2022ex8108903025Titanium-aluminium-vanadium alloy (TiAl6V4) bars, rods and wire, complying with AMS standards 4928, 4965 or 49670 %—31.12.2020ex8108903060 Forged cylindrical bars of titanium with: a purity of 99,995 % by weight or more, a diameter of 140 mm or more but not more than 200 mm, a weight of 5 kg or more but not more than 300 kg 0 %—31.12.2021 ex8108903070 Wire of an titanium alloy containing by weight: 22 % (± 1 %) of vanadium, and 4 % (± 0,5 %) of aluminium, or 15 % (± 1 %) of vanadium, 3 % (± 0,5 %) of chromium, 3 % (± 0,5 % of tin, and 3 % (± 0,5 %) of aluminium 0 %—31.12.2021ex8108905045 Cold or hot rolled plates, sheets and strips of non-alloyed titanium with: a thickness of 0,4 mm or more, but not more than 100 mm, a length of not more than 14 m, and a width of not more than 4 m 0 %—31.12.2022ex8108905055Plates, sheets, strip and foil of an alloy of titanium0 %—31.12.2021ex8108905080 Plates, sheets, strips and foil of non-alloyed titanium of a width of more than 750 mm of a thickness of not more than 3 mm 0 %—31.12.2019ex8108905085 Strip or foil of non-alloyed titanium: containing more than 0,07 % by weight of oxygen (O2), of a thickness of 0,4 mm or more but not more than 2,5 mm,

conforming to the Vickers hardness HV1 standard of not more than 170, of a kind used in the manufacture of welded tubes for nuclear power plant condensers 0 %—31.12.2019ex8108906030 Seamless tubes and pipes of titanium or an alloy of titanium with: a diameter of 19 mm or more but not more than 159 mm, a wall thickness of 0,4 mm or more but not more than 8 mm, and a maximum length of 18 m 0 %—31.12.2022 ex81089090 ex90039000 30 20 Parts of spectacle frames and mountings, including: temples, blanks of a kind used for the manufacture of spectacle parts, and bolts of the kind used for spectacle frames and mountings, of a titanium alloy 0 %p/st31.12.2021 ex8109200010Non-alloy zirconium sponges or ingots, containing by weight more than 0,01 % of hafnium for use in the manufacture of tubes, bars or ingots enlarged by remelting for the chemical industry0 %—31.12.2023ex8110100010Antimony in the form of ingots0 %—31.12.2023ex8112993010Alloy of niobium (columbium) and titanium, in the form of bars and rods0 %—31.12.2023ex8113002010Cermet blocks containing by weight 60 % or more of aluminium and 5 % or more of boron carbide0 %—31.12.2023ex8113009010Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits0 %—31.12.2022ex8113009020Cuboid spacer made of aluminium silicon carbide (AlSiC) composite used for packaging in IGBT-modules0 %—31.12.2020ex8207191010Inserts for drilling tools with working parts of agglomerated diamonds0 %p/st31.12.2019ex8207301010Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts of motor vehicles0 %p/st31.12.2022 ex83016000 ex84139100 ex84199085 ex84389000 ex84689000 ex84769090 ex84799070 ex84819000 ex85030099 ex85159080 ex85369095 ex85371098 ex87089120 ex87089199 ex87089910 ex87089997 20 40 30 20 20 20 83 30 70 30 95 70 10 20 50 40 Keypads of silicone or plastic, whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, whether or not printed or surface treated, whether or not with electrical conducting elements, whether or not with keypads foil glued on the keyboard, whether or not with protective foil, single or multilayer 0 %p/st31.12.2020ex8302200020 Castors, with an external diameter of 21 mm or more but not more than 23 mm, a width with screw of 19 mm or more but not more than 23 mm, a U-shaped plastic outer ring, an assembly screw fitted to the internal diameter and used as an inner ring 0 %p/st31.12.2020 ex8309909010 Aluminium can ends: with a diameter of 99,00 mm or more but not more than 136,5 mm (±1mm), whether or not with a ring-pull aperture 0 %p/st31.12.2023ex8401300020Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors0 %—31.12.2023ex8401400010Stainless steel absorber control rods, filled with neutron absorbing chemical elements0 %p/st31.12.2019 ex84059000 ex87082110 ex87082190 10 10 10 Metal casing for automobile safety belt pre-tension gas generators0 %p/st31.12.2019

ex84073320 ex84073380 ex84079080 ex84079090 10 10 10 10 Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm3 and a power of not less than 6 kW but not exceeding 20,0 kW, for the manufacture of: self-propelled lawn mowers, with a seat of subheading 84331151, and hand-operated lawn mowers of subheading 84331190, tractors of subheading 87019190, whose main function is that of a lawn mower, four stroke mowers with motor of a cylinder capacity of not less than 300 cc of subheading 84332010, or snowploughs and snow blowers of subheading 843020 0 %—31.12.2022ex8407901010Four-stroke petrol engines of a cylinder capacity of not more than 250 cm3 for use in the manufacture of garden equipment of heading 8432, 8433, 8436 or 85080 %—31.12.2021ex8407909020 Compact Liquid Petroleum Gas (LPG) Engine System, with: 6 cylinders, an output of 75 kW or more, but not more than 80 kW, inlet and exhaust valves modified to operate continuously in heavy duty applications, for use in the manufacture of vehicles of heading 8427 0 %—31.12.2020ex8408904120Diesel engines of a power of not more than 15 kW, with 2 or 3 cylinders, for use in the manufacture of vehicle mounted temperature control systems0 %—31.12.2023ex8408904320Diesel engines of a power of not more than 30 kW, with 4 cylinders, for use in the manufacture of vehicle mounted temperature control systems0 %—31.12.2023 ex84089043 ex84089045 ex84089047 40 30 50 4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having: a capacity of not more than 3850 cm3, and a rated output of 15 kW or more but not more than 85 kW, for use in the manufacture of vehicles of heading 8427 0 %—31.12.2022ex8409910040Fuel injector with solenoid valve for optimized atomization in the combustion chamber for use in the manufacture of spark-ignition internal combustion piston engines of motor vehicles0 %—31.12.2021 ex84099100 ex84099900 50 55 Exhaust manifold with turbine housing of turbochargers with: a heat-resistance of not more than 1050 °C, and a hole to insert a turbine wheel, whereby the hole has a diameter of 28 mm or more, but not more than 181 mm 0 %p/st31.12.2023 ex84099900 ex84799070 10 85 Injectors with solenoid valve for optimised atomisation in the engine combustion chamber0 %p/st31.12.2021ex8409990040 Plastic or aluminum cylinder head cover with: a camshaft position sensor (CMPS), metal brackets for mounting on an engine, and two or more gaskets, for use in the manufacture of engines of motor vehicles 0 %p/st31.12.2021ex8409990060 Intake manifold for air supply to the engine cylinders, comprising at least: a throttle, a boost pressure sensor, for use in the manufacture of compression ignition engines of motor vehicles 0 %—31.12.2022ex8409990070Metal alloy intake and exhaust valve with a Rockwell hardness HRC 20 or more, but not more than HRC 50 for use in the manufacture of compression ignition engines of motor vehicles0 %—31.12.2021ex8409990080

High pressure oil jet nozzle for engine piston cooling and lubrication with: an opening pressure of 1 bar or more, but not more than 3 bar, a closing pressure of more than 0,7 bar, a one-way valve, for use in the manufacture of compression ignition engines of motor vehicles 0 %—31.12.2022 ex8411990020 Wheel-shaped gas turbine component with blades, of a kind used in turbochargers: of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN G- NiCo10W10Cr9AlTi or DIN G- NiCr12Al6MoNb or AMS AISI:686, with a heat-resistance of not more than 1100 °C, with a diameter of 28 mm or more, but not more than 180 mm, with a height of 20 mm or more, but not more than 150 mm 0 %p/st31.12.2022ex8411990030 Turbine housing of turbochargers with: a heat-resistance of not more than 1050 °C, and a hole to insert a turbine wheel, whereby the hole has a diameter of 28 mm or more, but not more than 181 mm 0 %p/st31.12.2021 ex84119900 ex84123900 80 20 Actuator for a single-stage turbocharger: whether or not with conducting horns and connecting sleeves, having an operating distance of 20 mm or more but not more than 40 mm, with a length of not more than 350 mm, with a diameter of not more than 75 mm, with a height of not more than 110 mm 0 %p/st31.12.2023ex8413302030 Single-cylinder radial-piston high pressure pump for gasoline direct injection with: an operating pressure of 200 bar or more, but not more than 350 bar, a flow control, and a pressure relief valve, for use in the manufacture of engines of motor vehicles 0 %—31.12.2021ex8413703520 Single phase centrifugal pump: discharging at least 400 cm3 fluid per minute, with a noise level limited to 6 dBA, with the inside diameter of the suction opening and discharge outlet of not more than 15 mm, and working at ambient temperatures down to – 10 °C 0 %—31.12.2020ex8413910030 Fuel pump cover: consisting of aluminum alloys, with a diameter of 38 mm or 50 mm, with two concentric, annular grooves formed on its surface, anodized, of a kind used in motor vehicles with petrol engines 0 %p/st31.12.2019 ex8414308150Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0,5 kW or more but not more than 10 kW, with a displacement volume of not more than 35 cm3, of the type used in refrigeration equipment0 %—31.12.2019 ex84143081 ex84148073 60 30 Hermetic rotary compressors for Hydro-Fluoro-Carbon (HFC) refrigerants: driven by on-off single phase alternate current (AC) or brushless direct current (BLDC) variable speed motors with a nominal power rating of not more than 1,5 kW of a kind used in the production of household heat pump laundry tumble dryers 0 %—31.12.2023ex8414308920Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0,4 kW but not more than 10 kW0 %—31.12.2023ex8414592540Axial fan with an electric motor, of an output of not more than 2 W, for use in the manufacture of products of heading 8521 or 85280 %—31.12.2020

ex84148022 ex84148080 20 20 Air membrane compressor with: a flow of 4,5 l/min or more, but not more than 7 l/min, power input of not more than 8,1 W, and a gauge pressure capacity not exceeding 400 hPa (0,4 bar), of a kind used in the production of motor vehicle seats 0 %—31.12.2022ex8414900020Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles0 %p/st31.12.2019ex8414900030Pressure-regulating system, for incorporation into compressors of air conditioning machines of motor vehicles0 %p/st31.12.2023ex8414900040Drive part, for compressors of air conditioning machines of motor vehicles0 %p/st31.12.2023ex8415900030 Aluminium arc-welded removable receiver dryer with a connection block, containing polyamide and ceramic elements, with: a length of 166 mm (+/– 1 mm), a diameter of 70 mm (+/– 1 mm), an internal capacity of 280 cm3 or more, a water absorption rate of 17 g or more, and an internal purity expressed by permissible amount of impurities of not more than 0,9 mg/dm2, of a kind used in car air-conditioning systems 0 %p/st31.12.2020 ex8415900040Flame-soldered aluminium block with extruded, bent connector lines, of a kind used in car air-conditioning systems0 %p/st31.12.2020ex8415900055 Aluminium arc-welded removable receiver dryer with polyamide and ceramic elements with: a length of 143 mm or more but not more than 292 mm, a diameter of 31 mm or more but not more than 99 mm, a spangle length of not more than 0,2 mm and a thickness of not more than 0,06 mm, and a solid particle diameter of not more than 0,06 mm, of a kind used in car air-conditioning systems 0 %p/st31.12.2020ex8418991050Evaporator composed of aluminium fins and a copper coil of the kind used in refrigeration equipment0 %p/st31.12.2019ex8418991060Condenser composed of two concentric copper tubes of the kind used in refrigeration equipment0 %p/st31.12.2019ex8418991070Evaporator made of aluminium for use in the manufacture of air conditioning machines for automobiles0 %p/st31.12.2021ex8421210020 Water pre-treatment system comprising one or more of the following elements, whether or not incorporating modules for sterilization and sanitization of these elements: ultrafiltration system carbon filtration system water softener system for use in a biopharmaceutical laboratory 0 %p/st31.12.2019ex8421999091Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder0 %p/st31.12.2023ex8424897020Mechanical passenger car headlights washer with telescopic hose, high pressure nozzles and mounting clamps for use in the manufacture of goods of Chapter 870 %—31.12.2021ex8431200030Drive axle assembly containing differential, reduction gears, crown wheel, drive shafts, wheel hubs, brakes and mast mounting arms for use in the manufacture of vehicles in heading 84270 %p/st31.12.2022ex8431200040Aluminium core, plastic tank radiator, with integral steel support structure and an open core square wave design of 9 fins per 2,54 cm of core length for use in the manufacture of vehicles of heading 84270 %p/st31.12.2023

ex8436990010 Part containing: a single-phase AC motor, an epicyclic gearing, a cutter blade, and whether or not containing: a capacitor, a part fitted with a threaded bolt, for use in the manufacture of garden shredders 0 %p/st31.12.2020ex8439990010Suction-roll shells, produced by centrifugal casting, not drilled, in the form of alloy-steel tubes, of a length of 3000 mm or more and an external diameter of 550 mm or more0 %p/st31.12.2023 ex84679900 ex85365011 10 35 Mechanical switches for connecting electrical circuits, with: a voltage of 14,4 V or more but not more than 42 V, an amperage of 10 A or more but not more than 42 A, for use in the manufacture of machines falling within heading 8467 0 %p/st31.12.2019 ex84752900 ex85141080 10 10 Glass Filament Melter with heater basket/bushing assembly: electrically heated, with opening, with a multiplicity of tips (holes) of platinum/rhodium alloy, used to melt glass batches and condition molten glass, for drawing into continuous fibres 0 %p/st31.12.2019ex8477809910Machines for casting or for surface modification of plastic membranes of heading 39210 %p/st31.12.2023ex8479899735 Mechanical unit ensuring the movement of the camshaft with: 8 oil chambers, a phasing range of at least 38°, but not more than 62°, a steel and/or steel alloy sprocket, a steel and/or steel alloy rotor 0 %—31.12.2023 ex84798997 ex84799020 ex84799070 50 80 80 Machinery, being components of a production line for the manufacture of lithium ion batteries for passenger electric motor vehicles, for the construction of such a production line0 %p/st31.12.2020ex8479899760 Bioreactor for biopharmaceutical cell culture: having interior surfaces of austenitic stainless steel, and with a process capacity up to 15000 litres, whether or not combined with a clean-in-process system and/or a dedicated paired media hold vessel 0 %p/st31.12.2021 ex8479899770Machine to accurately align and attach lenses into a camera assembly in five axis alignment capability and fix them in position with a two part cure epoxy0 %p/st31.12.2019ex8479899780Machinery for the production of a sub assembled component (anode conductor and the negative closing cap) for the manufacture of AA and/or AAA alkaline batteries0 %p/st31.12.2019ex8479899785 High Pressure Hard Materials Compression Press (Link Press): with a 16000 tonne pressure rating, with a 1100 mm diameter Bolster (± 1mm), with a 1400 mm main cylinder (± 1mm), with a Fixed and floating link frame, multiple pump high pressure hydraulic accumulator and pressure system, with a double arm manipulator arrangement and connections for piping and electrical systems, with a total weight 310 tonnes (± 10 tonnes), and creating 30000 atmospheres at 1500 degrees centigrade using Low Frequency Alternating Current (16000 amps) 0 %p/st31.12.2020ex8479907087Fuel hose for internal combustion piston engines with a fuel temperature sensor, with at least two inlet hoses and three outlet hoses for use in the manufacture of engines of motor vehicles0 %p/st31.12.2021ex8481109920

Electromagnetic pressure reducing valve with a plunger, with at least 275 MPa internal tightness, with a plastic connector with 2 silver or tin pins 0 %—31.12.2022ex8481109930 Pressure reducing valves in a brass case with: a length of not more than 18 mm (± 1 mm), a width of not more than 30 mm (± 1 mm), of a kind used for incorporation in fuel delivery modules of motor vehicles 0 %—31.12.2022ex8481309191 Steel check (non-return) valves with: an opening pressure of not more than 800 kPa, an external diameter not more than 37 mm 0 %p/st31.12.2019ex8481805910Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines0 %p/st31.12.2023 ex8481805920Pressure regulating valve for incorporation into compressors of motor vehicle air condition units0 %p/st31.12.2021ex8481805930 Two-way flow control valve with housing, with: at least 5 but not more than 9 outlet holes with at least 0,110 mm but not more than 0,134 mm diameter, at least 640 cm3 / minute but not more than 805 cm3 / minute flow rate, at least 19 but not more than 300 MPa operating pressure 0 %—31.12.2022ex8481805940 Flow-control valve: made of steel, with an outlet hole with a diameter of at least 0,175 mm, but not more than 0,185 mm, with an inlet hole with a diameter of at least 0,255 mm, but not more than 0,265 mm, with chromium nitride coating, with a surface roughness of Rp 0,4 0 %—31.12.2022ex8481805950 Electromagnetic valve for quantity control with a plunger, DLC (Diamond-like carbon) coating, a solenoid with a of coil resistance of at least 2,6 Ohm, but not more than 3 Ohm, a supply voltage of 12 V 0 %—31.12.2022ex8481805960 Electromagnetic valve for quantity control: with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,52 Omh, and with an inductance of at least 0,083 mH, but not more than 0,172 mH, with a supply voltage of 24 V, operating at a DC of at least 15,5 A, but not more than 16,5 A 0 %—31.12.2022ex8481806960 Four-way reversing valve for refrigerants, consisting of: a solenoid pilot valve a brass valve body including valve slider and copper connections with a working pressure up to 4,5 MPa 0 %p/st31.12.2022 ex84818073 ex84818099 20 70 Pressure- and flow-control valve controlled by external electromagnet: made of steel and/or steel alloy(s), without integrated circuit, of not more than 1000 kPa operating pressure, with a flow quantity of not more than 5 l/min, without an electromagnet 0 %—31.12.2023 ex8481900040 Valve armature: for the opening and closing of the flow of fuel, consisting of a shaft and a blade, with 8 holes on the blade, made of metal and/or metal alloy(s) 0 %—31.12.2023 ex84821010 ex84821090 ex84825000 10 10 10 Ball and cylindrical bearings: with an outside diameter of 28 mm or more but not more than 140 mm, with an operational thermal stress of more than 150 °C at a working pressure of not more than 14 MPa, for the manufacture of machinery for the protection and control of nuclear reactors in nuclear power plants

0 %p/st31.12.2019 ex84821010 ex84821090 40 30 Ball bearings: with an internal diameter of 3 mm or more, with an external diameter of not more than 100 mm, with a width of not more than 40 mm, whether or not equipped with a duster, for use in the manufacture of belt drive steering systems of motor, electric power steering systems or steering gears or assembly ball screw for steering gears 0 %p/st31.12.2019 ex84833032 ex84833038 30 60 Bearing housing of a kind used in turbochargers: of precision-cast grey cast iron complying with standard DIN EN 1561 or precision-cast ductile cast iron complying with DIN EN 1560, with oil chambers, without bearings, with a diameter of 50 mm or more, but not more than 250 mm, with a height of 40 mm or more, but not more than 150 mm, whether or not with water chambers and connectors 0 %p/st31.12.2022ex8483402950 Gear set of cycloid gear type with: a rated torque of 50 Nm or more but not more than 9000 Nm, standard ratios of 1:50 or more but not more than 1:475, lost motion of not more than one arc minute, an efficiency of more than 80 %, of a kind used in robot arms 0 %p/st31.12.2021 ex8483402960 Epicyclic gearing, of a kind used in driving hand-held power tools with: a rated torque of 25 Nm or more, but not more than 70 Nm, standard gear ratios of 1:12,7 or more, but not more than 1:64,3 0 %p/st31.12.2023ex8483405120Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 843311510 %p/st31.12.2023ex8483405920Hydrostatic speed changer, having a hydro pump and a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 843311510 %p/st31.12.2023ex8483409020 Hydrostatic transmission with: measurements (without shafts) of not more than 154 mm × 115 mm × 108 mm, a weight of not more than 3,3 kg, a maximum rotation speed of the input shaft of 2700 rpm or more, but not more than 3200 rpm, a torque of the output shaft of not more than 10,4 Nm, a rotation speed of the output shaft of not more than 930 rpm at 2800 rpm input speed, and an operating temperature range of – 5 °C or more, but not more than + 40 °C, for use in the manufacture of hand-operated lawn mowers of subheading 84331190 0 %p/st31.12.2022ex8483409030 Hydrostatic transmission with: a reduction of 20,63:1 or more, but not more than 22,68:1, an input speed of 1800 rpm or more when loaded and of not more than 3000 rpm when unloaded, a continuous output torque of 142 Nm or more, but not more than 156 Nm, an intermittent output torque of 264 Nm or more, but not more than 291 Nm, and an axle shaft diameter of 19,02 mm or more, but not more than 19,06 mm, whether or not equipped with a fan impeller or with a pulley with integrated fan impeller, for use in the production of self-propelled lawn mowers with a seat of subheading 84331151, and tractors of subheading 87019190, whose main function is that of a lawn mower 0 %p/st31.12.2022 ex8483409080

Transmission gearbox, with: not more than 3 gears, an automatic deceleration system, and a power reversal system, for use in the manufacture of goods of heading 8427 0 %p/st31.12.2020ex8484200010Mechanical shaft seal for incorporation into rotary compressors for use in the manufacture of motor vehicle air condition units0 %p/st31.12.2021ex8501101020 Synchronous motor for a dishwasher with a water flow control mechanism with: a length without axle of 24 mm (+/– 0,3), a diameter of 49,3 mm (+/– 0,3), a rated voltage of 220 V AC or more but not more than 240 V AC, a rated frequency of 50 Hz or more but not more than 60 Hz, an input power of not more than 4 W, a rotation speed of 4 rpm or more but not more than 4,8 rpm, an output torque of not less than 10 kgf/cm 0 %—31.12.2020ex8501109956 DC Motor: with a speed rotation of not more than 7000 rpm (without load), with a nominal voltage of 12 V (± 4 V), with a maximum power of 13,78 W ( at 3,09 A), with a specified temperature range from – 40 °C to 160 °C, with a gear connection, with a mechanical attachment interface, with 2 electrical connections, with a maximum torque of 100 Nm 0 %—31.12.2021ex8501109957 DC motor: with a rotor speed of not more than 6500 rpm when not loaded; with a rated voltage of 12,0 V (+/– 0,1); of a specified temperature range of – 40 °C or more, but not more than + 165 °C; with or without a connecting pinion; with or without an engine connector 0 %—31.12.2020ex8501109958 DC Motor: with a speed rotation of not more than 6500 rpm (without load), with a nominal voltage of 12 V (± 4 V), with a maximal power below than 20 W, with a specified temperature range from – 40 °C to 160 °C, with a worm gear drive, with a mechanical attachment interface, with 2 electrical connections, with a maximum torque of 75 Nm 0 %—31.12.2021 ex8501109960 DC motor: with a rotor speed of 3500 rpm or more but not more than 5000 rpm loaded and not more than 6500 rpm when not loaded with a power supply voltage of 100 V or more but not more than 240 V for use in the manufacture of electric fryers 0 %—31.12.2022ex8501109965 Electric turbocharger actuator, with: a DC motor, an integrated gear mechanism, a (pulling) force of 200 N or more at a minimum of 140 °C elevated ambient temperature, a (pulling) force of 250 N or more in each position of its stroke, an effective stroke of 15 mm or more but not more than 25 mm, with or without an on-board diagnostics interface 0 %—31.12.2020ex8501109970 DC stepping motor, with: an angle of step of 7,5° (± 0,5°), a two-phase winding, a rated voltage of 9 V or more, but not more than 16,0 V, of a specified temperature range covering at least – 40 °C to + 105 °C, with or without connecting pinion, with or without motor drive connector 0 %—31.12.2023ex8501109975 Permanently excited DC motor with: a multiple-phase winding, an external diameter of 28 mm or more but not more than 35 mm, a rated speed of not more than 12000 rpm, a power supply voltage of 8 V or more but not more than 27 V

0 %—31.12.2020ex8501109979DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm, of a specified temperature range covering at least – 20 °C to + 70 °C0 %—31.12.2023 ex8501109980 DC stepping motor, with: an angle of step of 7,5° (± 0,5°), a pull-out torque at 25 °C of 25 mNm or more, a pull-out pulse rate of 1500 pps or more, a two-phase winding, and a rated voltage of 10,5 V or more, but not more than 16,0 V 0 %—31.12.2023ex8501109982DC motor, brushless, with an external diameter of not more than 29 mm, a rated speed of 1500 (± 15 %) rpm or 6800 (± 15 %) rpm, a supply voltage of 2 V or 8 V0 %—31.12.2019ex8501200030 Universal AC/DC motor with a rated output of 1,2 kW, a supply voltage of 230 V, and engine brake, assembled to a reduction gear with output shaft, which is contained in a plastic housing, for use as electric drive of lawnmower blades 0 %—31.12.2022ex8501310030DC motor, brushless, with a three-phase winding, an external diameter of 85 mm or more, but not more than 115 mm, a nominal torque of 2,23 Nm (± 1,0 Nm), of an output of more than 120 W but not more than 520 W, calculated with 1550 rpm (± 350 rpm) at a supply voltage of 12 V equipped with electronic circuit with sensors using the Hall effect, for use with an electric power steering control module (power steering motor)0 %—31.12.2021ex8501310037 Permanently excited DC motor with: a multiple-phase winding, an external diameter of 30 mm or more but not more than 80 mm, a rated speed of not more than 15000 rpm, an output of 45 W or more but not more than 300 W, and a supply voltage of 9 V or more but not more than 50 V, whether or not with a drive disc, whether or not with a crankcase, whether or not with a fan, whether or not with a cap assembly, whether or not with a sun gear, whether or not with a speed and rotational direction encoder, whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type 0 %—31.12.2019 ex8501310045 DC motors, brushless, with: an external diameter of 90 mm or more, but not more than 110 mm, a rated speed of not more than 3680 rpm, an output of 600 W or more but not more than 740 W at 2300 rpm and at 80 °C, a supply voltage of 12 V, a torque of not more than 5,67 Nm, a rotor position sensor, an electronic star-point relay, and for use with an electric power steering control module 0 %—31.12.2023ex8501310050 DC motors, brushless, with: an external diameter of 80 mm or more, but not more than 200 mm, a supply voltage of 9 V or more, but not more than 16 V, an output at 20 °C of 300 W or more, but not more than 750 W, a torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm, a rated speed at 20 °C of 600 rpm or more, but not more than 3100 rpm, with or without the rotor angle position sensor of resolver type or Hall effect type, of the kind used in power steering systems for cars 0 %—31.12.2022ex8501310055 DC motor with commutator, with: an external diameter of 27,5 mm or more, but not more than 45 mm,

a rated speed of 11000 rpm or more, but not more than 23200 rpm, a rated supply voltage of 3,6 V or more, but not more than 230 V, an output power of not more than 529 W, a free load current of not more than 3,1 A, a maximum efficiency of 54 % or more, for driving hand-held power tools 0 %—31.12.2023 ex85013100 ex85013200 71 77 Automotive-ready, brushless and permanently excited direct current motor with: a specified speed of not more than 4100 rpm, a minimum output of 400 W, but not more than 1,3 kW (at 12 V), a flange diameter of 90 mm or more, but not more than 150 mm, a maximum length of 210 mm, measured from the beginning of the shaft to the outer ending, a housing length of not more than 160 mm, measured from the flange to the outer ending, a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and surface magnets 0 %—31.12.2020 ex8501310075 Brushless DC motor assembly comprised of a motor and transmission, with: electronic control operating by Hall Effect position sensors, voltage input 9 V or more but not more than 16 V, external diameter of the motor 70 mm or more but not more than 80 mm, output motor power 350 W or more but not more than 550 W, maximum output torque 50 Nm or more but not more than 52 Nm, maximum output rotation speed 280 rpm or more but not more than 300 rpm, coaxial male spline outputs of outer diameter 20 mm (± 1 mm), 17 teeth and minimum length of teeth 25 mm (± 1 mm), and with distance between root of splines 119 mm (± 1 mm), for use in the manufacture of all-terrain or utility task vehicles 0 %—31.12.2021 ex85013200 ex85013300 60 15 Traction motor, with: a torque output of 200 Nm or more but not more than 300 Nm a power output of 50 kW or more but not more than 100 kW a rated speed of not more than 12500 rpm for use in the manufacture of electric vehicles 0 %—31.12.2019 ex85013300 ex85014080 ex85015350 30 50 10 Electric drive for motor vehicles, with an output of not more than 315 kW, with: an AC or DC motor whether or not with transmission, power electronics 0 %—31.12.2021 ex85015100 ex85015220 30 50 AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6000 rpm, with: an output of 340 W or more but not more than 7,4 kW, a flange of dimensions of not more than 180 mm × 180 mm, and a length from flange to extreme end of resolver of not more than 271 mm 0 %—31.12.2021ex8501612035 Fuel cell module, AC generator with an output of 7,5 kVA or less, consisting of: a Hydrogen generator (desulphurizer, reformer and cleaner) a PEM fuel cell stack, and an Inverter, for use as a part in a heating appliance 0 %—31.12.2020ex8501620030 Fuel cell system consisting of at least phosphoric acid fuel cells, in a housing with integrated water management and gas treatment,

for permanent, stationary energy supply 0 %—31.12.2022 ex85030091 ex85030099 31 32 Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring0 %p/st31.12.2023ex8503009931Stamped collector of an electric motor, having an external diameter of not more than 16 mm0 %p/st31.12.2023ex8503009933Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm0 %p/st31.12.2021ex8503009934Rotor for brushless motor of electrical power steering with a roundness tolerance of 50 μm0 %p/st31.12.2019ex8503009935Transmitter resolver for brushless motors of electrical power steering0 %p/st31.12.2019ex8503009937 Rotor for an electric motor, with the rotor cylindrical body made of agglomerated ferrite and plastics and the shaft made of metal with: diameter of the rotor body of 17 mm or more but not more than 37 mm, length of the rotor body of 12 mm or more but not more than 36 mm, shaft length of 52 mm or more but not more than 82 mm 0 %—31.12.2023ex8503009940Fuel cell membrane, in rolls or sheets, with a width of not more than 150 cm, of a kind used for manufacture of fuel cells in heading 85010 %p/st31.12.2022ex8503009960Engine cover for electronic belt drive steering system of galvanized steel with a thickness of not more than 2,5 mm (± 0,25 mm)0 %p/st31.12.2019 ex8504318015 Electrical Transformer with: a capacity of 192 Watts or 216 Watts, dimensions of not more than 27,1 × 26,6 × 18 mm, an operating temperature range of – 40 °C or more, but not more than + 125 °C, three or four inductively coupled copper wire windings, and 9 connection pins at the bottom 0 %—31.12.2023ex8504318025 Electrical Transformer with: a capacity of 432 Watts, dimensions of not more than 24 mm × 21 mm × 19 mm, an operating temperature range of – 20 °C or more, but not more than + 85 °C, two windings, and 5 connection pins at the bottom 0 %—31.12.2023ex8504318030Switching transformers, having a power handling capacity of not more than 1 kVA for use in the manufacture of static converters0 %—31.12.2023ex8504318035 Electrical Transformer with: a capacity of 433 Watts, dimensions of not more than 37,3 × 38,2 × 28,5 mm, an operating temperature range of – 40 °C or more, but not more than + 125 °C, four inductively coupled copper wire windings, and 13 connection pins at the bottom 0 %—31.12.2023ex8504318040 Electrical transformers: with a capacity of 1 kVA or less, without plugs or cables, for internal use in the manufacture of set top boxes and TVs 0 %—31.12.2022 ex85043180 ex85045095 45 15 Electrical Transformer with: a capacity of 0,2 Watts, dimensions of not more than 15 × 15,5 × 14 mm, an operating temperature range of – 10 °C or more, but not more than + 125 °C, two inductively coupled copper wire windings, 5 connection pins at the bottom, and a copper shielding 0 %—31.12.2023ex8504318050Transformers for use in the manufacture of electronic drivers, control devices and LED light sources for lighting industry0 %—31.12.2021

ex8504408240 Printed circuit board equipped with a bridge rectifier circuit and other active and passive components: with two output connectors, with two input connectors which are available and useable in parallel, able to switch between bright and dimmed operation mode, with an input voltage of 40 V (+ 25 % – 15 %) or 42 V (+ 25 % – 15 %) in bright operation mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, or with an input voltage of 230 V (+ 20 % – 15 %) in bright operation mode, with an input voltage of 160 V (± 15 %) in dimmed operation mode, or with an input voltage of 120 V (15 % – 35 %) in bright operation mode, with an input voltage of 60 V (± 20 %) in dimmed operation mode, with an input current reaching 80 % of its nominal value within 20 ms, with an input frequency of 45 Hz or more, but not more than 65 Hz for 42 V and 230 V, and 45-70 Hz for 120 V versions, with an maximum inrush current overshoot of not more than 250 % of the input current, with a period of the inrush current overshoot of not more than 100 ms, with an input current undershoot of not less than 50 % of the input current, with a period of the inrush current undershoot of not more than 20 ms, with a presettable output current, with an output current reaching 90 % of its nominal pre-set value within 50 ms, with an output current reaching zero within 30 ms after removal of the input voltage, with an defined failure status in case of no-load or too-high load (end-of-life function) 0 %p/st31.12.2022ex8504408250 Electric rectifier: with an input AC voltage of 100-240 V at frequency of 50-60 Hz, with two output DC voltages of 9 V or more but not more than 12 V and 396 V or more but not more than 420 V, output cables without connectors, and in a plastic enclosure with dimensions 110 mm (± 0,5 mm) × 60 mm (± 0,5 mm) × 38 mm (± 1 mm), for use in the manufacture of products using IPL (Intensive Pulse Light) 0 %p/st31.12.2022 ex8504408830DC to AC inverter for use in traction motor control for use in the manufacture of electric vehicles0 %p/st31.12.2019ex8504409015Semiconductor power module (so called Smart Power Module) for converting single-phase AC input voltage into 2 or 3-phase AV voltage used to power up polyphase AC variable-speed electrical drives, in a casing fitted with one or more integrated circuits, IGBTs, diodes and thermistors, having an output voltage of 600 VAC or 650 VAC, and a rated current of 4 A or more, but not more than 30 A0 %—31.12.2021ex8504409025 Direct current to direct current converter without housing, or with housing with connection pins, connection studs, screw connectors, unprotected line connections, connection elements which allow the mounting to a printed circuit board by soldering or any other technology, or other wiring connections requiring further processing 0 %p/st31.12.2021ex8504409030Static converter comprising a power switch with insulated-gate bipolar transistors (IGBTs), contained in a housing, for use in the manufacture of microwave ovens of subheading 851650000 %p/st31.12.2023ex8504409040

Semiconductor power modules comprising: power transistors, integrated circuits, whether or not containing diodes and with or without thermistors, an operating voltage of not more than 600 V, not more than three electrical outputs each containing two power switches (whether MOSFET (Metal Oxide Semiconductor Field-Effect Transistor) or IGBT (Insulated Gate Bi-polar Transistors)) and internal drives, and a rms (root mean square) current rating of not more than 15,7 A 0 %p/st31.12.2023ex8504409050 Drive unit for industrial robot with: one or six 3-phase motor outputs with maximum 3 × 32 A, a main power input of 220 V AC or more, but not more than 480 V AC, or 280 V DC or more, but not more than 800 V DC, a logic power input of 24 V DC, an EtherCat communication interface, and a dimension of 150 × 140 × 120 mm or more, but not more than 335 × 430 × 179 mm 0 %p/st31.12.2023 ex8504409070 Module for converting alternating current into direct current and direct current into direct current with: a rated power of not more than 100 W, an input voltage of 80 V or more, but not more than 305 V, an certified input frequency of 47 Hz or more, but not more than 440 Hz, one or more constant voltage output(s), an operating temperature range of – 40 °C or more, but not more than + 85 °C, pins for mounting to a printed circuit 0 %p/st31.12.2023ex8504409080 Power converter containing: a DC to DC converter a charger of a capacity of not not more than 7 kW switching functions for use in the manufacture of electric vehicles 0 %p/st31.12.2019ex8504509520Inductors with one or more windings, having an inductance of not more than 62 mH per winding/coil0 %p/st31.12.2023ex8504509540 Coil choke with: an inductance of 4,7 μH (± 20 %), a DC resistance of not more than 0,1 Ohms, an insulation resistance of 100 MOhms or more at 500 V (DC), for use in the manufacture of LCD and LED module power boards 0 %p/st31.12.2020ex8504509550 Solenoid coil with: a power consumption of not more than 6 W, an insulation resistance of more than 100 M ohms, and an insert hole of 11,4 mm or more, but not more than 11,8 mm 0 %p/st31.12.2022ex8504509560Inductors with one or more windings, with an inductance per winding of not more than 350 mH, for use in the manufacture of electronic control gear, control units and LED light sources for the lighting industry0 %—31.12.2021ex8504509570 Solenoid coil with: a rated power of more than 10 W but not more than 15 W, an insulation resistance of 100 M Ohms or more, a DC resistance of not more than 34,8 Ohm (± 10 %) at 20 °C, a rated current of not more than 1,22 A, a rated voltage of not more than 25 V 0 %p/st31.12.2021 ex8504509580 Self-induction coil: with one or more windings, with an inductivity per winding of no more than 62 mH, attached to one or more carrier materials, with ferrites, with one or more Negative Temperature Coefficient resistors as a temperature sensor, whether or not with insulation covers, spacers and connection cables 0 %—31.12.2022ex8504901110Ferrite cores, other than for deflection yokes0 %p/st31.12.2023ex8504901120Reactor cores for use in a High Voltage Direct Current thyristor converter0 %p/st31.12.2019ex8504909920

Thyristor SGCT (Symmetric Gate-Commutated Thyristor) with integrated gate driver: being a power electronic circuit mounted on the PCB, equipped with SGCT thyristor and electric and electronic components, having an ability to block the voltage - 6500 V - in both directions (conducting and the reverse direction), of a kind used in medium voltagestatic converters (rectifiers and inverters) 0 %p/st31.12.2019ex8505110047 Articles in the form of a triangle, square or rectangle, whether or not shaped or with rounded corners intended to become permanent magnets after magnetization, containing neodymium, iron and boron, with dimensions: a length of 9 mm or more but not more than 105 mm, a width of 5 mm or more but not more than 105 mm, and a height of 2 mm or more but not more than 55 mm 0 %—31.12.2021ex8505110050 Bars specifically shaped, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with dimensions: a length of 15 mm or more but not more than 52 mm, a width of 5 mm or more but not more than 42 mm, of a kind to be used in the manufacture of electric servomotors for industrial automation 0 %p/st31.12.2022 ex8505110053 Permanent magnets of a neodymium alloy cylindrical shaped with notch with internal threaded bore on one side, with: a length of 97,5 mm or more, but not more than 225 mm a diameter of 19 mm or more, but not more than 25 mm 0 %—31.12.2023 ex85051100 ex85051990 55 40 Flat bars of an alloy of samarium and cobalt with a length of 30,4 mm (± 0,05 mm), a width of 12,5 mm (± 0,15 mm), a thickness of 6,9 mm (± 0,05 mm), or composed of ferrites in the shape of a quarter sleeves with: a length of 46 mm (± 0,75 mm), a width of 29,7 mm (± 0,2 mm), intended to become permanent magnets after magnetisation, of a kind used in car starters and devices extending the drive range of electric cars 0 %p/st31.12.2020ex8505110063 Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, with: an external diameter of not more than 45 mm, a height of not more than 45 mm, of a kind used in the manufacture of permanent magnets after magnetisation 0 %p/st31.12.2022ex8505110065 Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rectangle, whether or not rounded, with a rectangular or a trapezoidal section having: a length of not more than 140 mm, a width of not more than 90 mm, and a thickness of not more than 55 mm, or in the shape of curved rectangle (tile type) having: a length of not more than 75 mm, a width of not more than 40 mm, a thickness of not more than 7 mm, and a radius of curvature of more than 86 mm but not more than 241 mm, or in the shape of a disc with a diameter of not more than 90 mm, whether or not containing a hole in the centre 0 %p/st31.12.2023ex8505110070 Disc consisting of an alloy of neodymium, iron and boron, covered with nickel or zinc, that after magnetisation is intended to become a permanent magnet: whether or not containing a hole in the centre,

with a diameter of not more than 90 mm, of a kind used in car loudspeakers 0 %—31.12.2023 ex8505110075 A quarter sleeve intended to become permanent magnet after magnetization: consisting of at least neodymium, iron and boron, with a width of 9,1 mm or more but not more than 10,5 mm, with a length of 20 mm or more but not more than 30,1 mm, of a kind used on rotors for the manufacture of fuel pumps 0 %p/st31.12.2019ex8505199030Articles of agglomerated ferrite in the shape of a disc with a diameter of not more than 120 mm, containing a hole in the centre intended to become permanent magnets after magnetisation with a remanence between 245 mT and 470 mT0 %—31.12.2023ex8505199050 Article of agglomerated ferrite in the shape of a rectangular prism to become a permanent magnet after magnetisation: whether or not with bevelled edges, of a length of 27 mm or more but not more than 32 mm (± 0,15 mm), of a width of 8,5 mm or more but not more than 9,5 mm (+ 0,05 mm /– 0,09 mm), of a thickness of 5,5 mm or more but not more than 5,8 mm (+ 0/– 0,2 mm), and of a weight of 6,1 g or more but not more than 8,3 g 0 %p/st31.12.2022ex8505199060 Article of agglomerated ferrite in the shape of a half-sleeve or a quarter-sleeve to become a permanent magnet after magnetization: of a length of 30 mm or more but not more than 50 mm (± 1 mm), of a width of 33 mm or more but not more than 55 mm (± 1 mm), of a height of 12,5 mm or more but not more than 21,5 mm (± 1 mm), of a thickness of 3,85 mm or more but not more than 6,8 mm (± 0,15 mm) and having an outer radius of 19 mm or more but not more than 29,4 mm (± 0,2 mm) 0 %—31.12.2023ex8505200030Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles0 %p/st31.12.2023ex8505902930 Coil for an electromagnetic valve, with: a plunger, a diameter of 12,9 mm (+/– 0,1), a height without plunger of 20,5 mm (+/– 0,1), an electric cable with connector, and in a cylindrical metal housing 0 %p/st31.12.2019 ex8506501010 Lithium cylindrical primary cells with: a diameter of 14,0 mm or more but not more than 26,0 mm, a length of 2,2 mm or more but not more than 51 mm, a voltage of 1,5 V or more, but not more than 3,6 V, a capacity of 0,15 Ah or more, but not more than 5,00 Ah, for use in the manufacture of telemetry and medical devices, electronic meters or remote controls 0 %—31.12.2021ex8506503010 Lithium manganese dioxide cell, with: a diameter of 20 mm or more but not more than 25 mm a length of 3 mm or more but not more than 6 mm a voltage of 3 V or more but not more than 3,4 V a capacity of 200 mAh or more but not more than 600 mAh an automotive test temperature range from – 40 °C to + 125 °C for use as a component within the manufacture of Tyre Pressure Measuring Systems (TPMS) 0 %—31.12.2022ex8506509010Lithium iodine single cell battery the dimensions of which do not exceed 9 mm × 23 mm × 45 mm and a voltage of not more than 2,8 V0 %—31.12.2023ex8506509030Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions of not more than 28 mm × 45 mm × 15 mm and a capacity of not less than 1,05 Ah0 %—31.12.2023ex8507102080

Lead acid starter battery, with: a charge acceptance capacity of 200 % or more of the level of an equivalent conventional flooded battery during the first 5 seconds of charge, a liquid electrolyte, for use in the manufacture of passenger cars and light commercial vehicles employing high regenerative alternator controls or start/stop systems with high regenerative alternator controls 0 %—31.12.2020 ex85075000 ex85076000 20 20 Rectangular accumulator or module, with a length of not more than 69 mm, a width of not more than 36 mm and a thickness of not more than 12 mm, for use in the manufacture of rechargeable batteries0 %—31.12.2023 ex8507500040 Nickel-metal Hydride (NiMH) battery assembly, with: a voltage of 190 V or more but not more than 210 V, a length of 220 mm or more but not more than 280 mm, a width of 500 mm or more but not more than 600 mm, a height of 100 mm or more but not more than 150 mm, for use in the manufacture of motor vehicles of Chapter 87 0 %—31.12.2022ex8507600015 Cylindrical lithium-ion-accumulators or modules with: a nominal capacity of 8,8 Ah or more, but not more than 18 Ah, a nominal voltage of 36 V or more, but not more than 48 V, a power of 300 Wh or more, but not more than 648 Wh, for use in the manufacture of electric bicycles 0 %—31.12.2020ex8507600017 Lithium-ion starter accumulator, consisting of four rechargeable lithium-ion secondary cells, with: a rated voltage of 12 V, a length of 350 mm or more but not more than 355 mm, a width of 170 mm or more but not more than 180 mm, a height of 180 mm or more but not more than 195 mm, weighing 10 kg or more but not more than 15 kg, a nominal charge of 60 Ah or more, but not more than 80 Ah 0 %—31.12.2020ex8507600023 Lithium-ion-accumulator or module with: a nominal capacity of 72 Ah or more, but not more than 100 Ah, a nominal voltage of 3,2 V, a weight of 1,9 kg more, but not more than 3,4 kg, for use in the manufacture of rechargeable hybrid electric vehicle batteries 0 %—31.12.2020ex8507600025 Rectangular modules for incorporation in lithium-ion rechargeable batteries, with: a width of 352,5 mm (± 1 mm) or 367,1 mm (± 1 mm), a depth of 300 mm (± 2 mm) or 272,6 mm (± 1 mm), a height of 268,9 mm (± 1,4 mm) or 229,5 mm (± 1 mm), a weight of 45,9 kg or 46,3 kg, a rating of 75 Ah, and a nominal voltage of 60 V 0 %p/st31.12.2022 ex8507600027 Lithium-ion cylindrical accumulator with: a nominal capacity of 10 Ah or more, but not more than 20 Ah, a nominal voltage of 12,8 V (± 0,05) or more, but not more than 15,2 V (± 0,05), a power of 128 Wh or more, but not more than 256 Wh, for use in the manufacture of electric bicycle drives 0 %—31.12.2020ex8507600030Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1200 mAh or more, for use in the manufacture of rechargeable batteries0 %—31.12.2019ex8507600033 Lithium-ion accumulator, with: a length of 150 mm or more, but not more than 300 mm a width of 700 mm or more, but not more than 1000 mm

a height of 1100 mm or more, but not more than 1500 mm a weight of 75 kg or more, but not more than 160 kg a nominal capacity not less than 150 Ah and not more than 500 Ah 0 %—31.12.2020ex8507600037 Lithium-ion accumulator, with: a length of 1200 mm or more, but not more than 2000 mm a width of 800 mm or more, but not more than 1300 mm a height of 2000 mm or more, but not more than 2800 mm a weight of 1800 kg or more, but not more than 3000 kg a nominal capacity of 2800 Ah or more but not more than 7200 Ah 0 %—31.12.2020ex8507600043 Lithium-ion accumulators, with: a thickness of not more than 4,15 mm, a width of not more than 245,15 mm, a length of not more than 90,15 mm, a nominal capacity of 1000 mAh or more but not more than 10000 mAh, a weight of not more than 250 g, for use in the manufacture of products falling within subheading 84713000 0 %—31.12.2020 ex85076000 ex85078000 45 20 Rechargeable lithium-ion polymer battery with: a nominal capacity of 1060 mAh, a nominal voltage of 7,4 V (average voltage at 0,2 C discharge), a charging voltage of 8,4 V (± 0,05), a length of 86,4 mm (± 0,1), a width of 45 mm (± 0,1), a height of 11 mm (± 0,1), for use in the manufacture of cash registers 0 %—31.12.2019ex8507600047 Lithium-ion accumulators, with: a thickness of not more than 6 mm, a width of not more than 100 mm, a length of not more than 150,15 mm, a nominal capacity of 1000 mAh or more but not more than 10000 mAh, a weight of not more than 150 g, for use in the manufacture of products falling within subheading 85171200 0 %—31.12.2020ex8507600050 Modules for the assembly of batteries of ion lithium electric accumulators with: a length of 298 mm or more, but not more than 408 mm, a width of 33,5 mm or more, but not more than 209 mm, a height of 138 mm or more, but not more than 228 mm, a weight of 3,6 kg or more, but not more than 17 kg, and a power of 458 Wh or more, but not more than 2158 Wh 0 %—31.12.2022ex8507600053 Batteries of lithium-ion electric accumulators or rechargeable module: a length of 1203 mm or more, but not more than 1297 mm, a width of 282 mm or more, but not more than 772 mm, a height of 792 mm or more, but not more than 839 mm, a weight of 253 kg or more, but not more than 293 kg, power of 22 kWh or 26 kWh, and constituted of 24 or 48 modules 0 %—31.12.2022 ex8507600060 Lithium-ion rechargeable batteries, with: a length of 1213 mm or more, but not more than 1575 mm, a width of 245 mm or more but not more than 1200 mm, a height of 265 mm or more, but not more than 755 mm, a weight of 265 kg or more but not more than 294 kg, a nominal capacity of 66,6 Ah, put up in packs of 48 modules 0 %—31.12.2020ex8507600065 Cylindrical lithium ion cell with: 3,5 VDC to 3,8 VDC, 300 mAh to 900 mAh, and a diameter of 10,0 mm to 14,5 mm 0 %—31.12.2021ex8507600071 Lithium-ion rechargeable batteries, with: a length of 700 mm or more, but not more than 2820 mm a width of 935 mm or more, but not more than 1660 mm a height of 85 mm or more, but not more than 700 mm

a weight of 250 kgor more, but not more than 700 kg a power of not more than 175 kWh 0 %—31.12.2021ex8507600075 Rectangular lithium-ion-accumulator, with: a metal casing, a length of 173 mm (± 0,15 mm), a width of 21 mm (± 0,1 mm), a height of 91 mm (± 0,15 mm), a nominal voltage of 3,3 V, and a nominal capacity of 21 Ah or more 0 %—31.12.2021ex8507600080 Rectangular lithium-ion-accumulator or module, with a metal casing, a length of 171 mm (± 3 mm), a width of 45,5 mm (± 1 mm), a height of 115 mm (± 1 mm), a nominal voltage of 3,75 V, and a nominal capacity of 50 Ah, for use in the manufacture of rechargeable batteries for motor vehicles 0 %—31.12.2020 ex8507600085 Lithium-ion Rectangular modules for incorporation in lithium-ion rechargeable batteries: of a length of 300 mm or more, but not more than 350 mm, of a width of 79,8 mm or more, but not more than 225 mm, of a height of 35 mm or more, but not more than 168 mm, of a weight of 3,95 kg or more, but not more than 8,85 kg, with a rating of 66,6 Ah or more, but not more than 129 Ah 0 %—31.12.2020ex8507908070 Cut plate of nickel-plated copper foil, with: a width of 70 mm (± 5 mm), a thickness of 0,4 mm (± 0,2 mm), a length of not more than 55 mm, for use in the manufacture of lithium-ion electric rechargeable batteries 0 %p/st31.12.2021 ex85087000 ex85371098 10 96 Printed circuit board without a housing for actuating and controlling vacuum cleaner brushes powered by a motor with an output of not more than 300 W0 %p/st31.12.2020 ex85087000 ex85371098 20 98 Electronic circuit cards that: are connected by wire or radio frequency to each other and the motor controller card, and regulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program, whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full) 0 %p/st31.12.2020ex8511300030 Igniter integrated coil assembly with: an igniter, a coil on plug assembly with an integrated mounting bracket, a housing, a length of 90 mm or more but not more than 200 mm (± 5 mm), an operating temperature of – 40 °C or more but not more than 130 °C, a voltage of 10,5 V or more, but not more than 16 V 0 %p/st31.12.2019ex8511300055 Ignition coil: with a length of 50 mm or more, but not more than 200 mm, with an operating temperature of – 40 °C or more, but not more than 140 °C, and with a voltage of 9 V or more, but not more than 16 V, with or without connection cable, for use in the manufacture of engines of motor vehicles 0 %—31.12.2021 ex8511800020 Glow-plug for pre-heating of the diesel engines with: an operating temperature of more than 800 °C, a voltage of 5 V or more, but not more than 16 V, a heating rod containing silicon nitride (Si3N4) and molybdenum disilicide (MoSi2), and a metal housing, for use in the manufacture of diesel engines of motor vehicles 0 %—31.12.2021ex8512200020Information screen displaying at least time, date and status of safety features in a vehicle with an operating voltage of 12 V or more, but not more than 14,4 V, of a kind used in the manufacturing of goods of Chapter 870 %p/st31.12.2019ex8512200030

Lighting module, containing at least: two LEDs, glass or plastic lenses, focusing/scattering the light emitted by the LEDs, reflectors redirecting the light emitted by the LEDs, in an aluminium housing with a radiator, mounted at a bracket with an actuator 0 %p/st31.12.2020ex8512200040 Fog lamp with a galvanised inner surface, containing: a plastic holder with three or more brackets, one or more 12 V bulbs, a connector, a plastic cover, whether or not with a connection cable, for use in the manufacture of goods of Chapter 87 0 %p/st31.12.2019ex8512309010 Horn assembly operating on piezomechanical principle for generating a specific sound signal, with a voltage of 12 V, comprising: coil, magnet, metal membrane, connector, holder, of a kind used in the manufacture of goods of Chapter 87 0 %p/st31.12.2019 ex8512309020 Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing: a printed circuit board, a connector, whether or not a metal holder, of a kind used in the manufacture of goods of chapter 87 0 %p/st31.12.2020ex8512309030 Sound alarm device for protection against burglary into the vehicle: with an operating temperature of – 45 °C or more, but not more than + 95 °C, with a voltage of 9 V or more but not more than 16 V, in a plastic housing, whether or not with a metal holder, for use in the manufacture of motor vehicles 0 %—31.12.2022 ex85124000 ex85168020 10 20 Car door mirror heating foil: with two electrical contacts, with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the side of the mirror glass), with a protective paper film on both sides 0 %—31.12.2023 ex85142080 ex85165000 ex85166080 10 10 10 Cavity assembly comprising at least: a transformer with an input of not more than 240 V and an output of not more than 3000 W an AC or DC fan motor with an output of not more than 42 watts a housing made of stainless steel with or without a magnetron of a microwave output power of not more than 900 W for use in the manufacture of built-in products of headings 85142080, 85165000 and 85166080 0 %p/st31.12.2019ex8516900060 Ventilation sub-assembly of an electric deep-fat fryer: fitted with a motor having a power rating of 8 W at 4600 rpm, governed by an electronic circuit, operating at ambient temperatures above 110 °C, fitted with a thermoregulator 0 %p/st31.12.2019ex8516900070 Inner pot: containing side and central openings, of annealed aluminium, with a ceramic coating, heat resistant to more than 200 °C, for use in the manufacture of an electric fryer 0 %p/st31.12.2022 ex8516900080Door assembly incorporating a capacitive sealing element and wavelength choke for use in the manufacture of built-in products of headings 85142080, 85165000 and 851660800 %p/st31.12.2019ex8518299530 Loudspeakers of: an impedance of 3 Ohm or more, but not more than 16 Ohm, a nominal power of 2 W or more, but not more than 20 W, with or without plastic bracket, and with or without electric cable fitted with connectors,

of a kind used for TV sets and video monitors manufacture as well as home entertainment systems 0 %—31.12.2022ex8518299540 Loudspeaker of an impedance of 1,5 Ohm or more, but not more than 10 Ohm, of a diameter of 25 mm or more but not more than 80 mm, with frequency range of 150 Hz to 20 kHz, with rated power of 5 W or more, but not more than 40 W, and whether or not with electric cable with connector, whether or not with a bracket, used in the manufacture of goods of Chapter 87 0 %—31.12.2021ex8518309520Headphone and earphone for hearing aids, contained in a housing the exterior dimensions of which, excluding connecting points, do not exceed 5 mm × 6 mm × 8 mm0 %p/st31.12.2023ex8518408091Circuit board sub-assembly, comprising digital audio signal decoding, audio signal processing and amplification with dual and/or multi-channel functionality0 %—31.12.2019ex8518408092Circuit board sub-assembly, comprising power supply, active equalizer and power amplifier circuits0 %—31.12.2020ex8518408093 Audio power amplifier with: an output power of 50 W, an operating voltage of more than 9 V but not more than 16 V, an electrical impedance of not more than 4 Ohm, a sensitivity of more than 80 dB, in a metal housing, for use in the manufacture of motor vehicles 0 %p/st31.12.2021 ex8518900030 Magnet system consisting of: a steel coreplate, in the form of a disk on one side provided with a cylinder a neodymium magnet an upper plate a lower plate of a kind used in car loudspeakers 0 %p/st31.12.2019ex8518900035 Metal plate of steel, perforated, and measuring 60,30 mm (+ 0,00 mm /– 0,40 mm) × 15,5 mm (+ 0,00 mm /– 0,40 mm) × 4,40 mm (± 0,05 mm), for use in the manufacture of loudspeaker passive radiators 0 %—31.12.2021ex8518900040Loudspeaker cone, made from paper pulp or polypropylene, with accompanying dustcaps, of a kind used in car loudspeakers0 %p/st31.12.2019ex8518900050 Diaphragm for an electrodynamic speaker with: an outside diameter of 25 mm or more but not more than 250 mm, a resonance frequency of 20 Hz or more but not more than 150 Hz, a total height of 5 mm or more but not more than 50 mm, an edge thickness of 0,1 mm or more but not more than 3 mm 0 %p/st31.12.2019ex8518900060Upper plate for a loudspeaker magnet system of integrally punched, stamped and plated steel, in the shape of a disk, whether or not containing a hole in the centre, of a kind used in car loudspeakers0 %—31.12.2020ex8518900080 Integrated car loudspeaker housing, consisting of: a speaker frame and magnet system holder with a protective coating, and an embossed anti-dust cloth 0 %p/st31.12.2019ex8521900020 Digital video recorder: without a hard disk drive, with or without a DVD-RW drive, with either motion detection or capability of motion detection through IP connectivity via LAN connector with or without a USB serial port, for use in the manufacture of closed-circuit television (CCTV) surveillance systems 0 %—31.12.2019 ex85229049 ex85279900 ex85299065 60 10 25 Printed circuit board assembly comprising:

a radio tuner (capable of receiving and decoding radio signals and transmitting those signals within the assembly) without signal processing capabilities, a microprocessor capable of receiving remote control messages and controlling the tuner chipset, for use in the manufacture of home entertainment systems 0 %p/st31.12.2019 ex85229049 ex85279900 ex85299065 65 20 40 Printed circuit board subassembly, comprising: a radio tuner, capable of receiving and decoding radio signals and transmitting those signals within the assembly, with a signal decoder, a radio frequency (RF) remote control receiver, an infrared remote control signal transmitter, a SCART signal generator, a TV state sensor, for use in the manufacture of home entertainment systems 0 %p/st31.12.2019 ex85229080 ex85299092 30 57 Metal holder, metal fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players0 %p/st31.12.2021ex8522908065Assembly for optical discs, comprising at least an optical unit and DC motors, whether or not capable of double layer recording0 %p/st31.12.2023ex8522908080Laser optical drive unit assembly (so called mecha units) for the recording and/or reproduction of digital video and/or audio signals, comprising at least a laser optical reading and/or writing unit, one or more DC motors and not containing a printed circuit board or containing a printed circuit board not capable of signal processing for sounds and images, for use in the manufacture of products falling within headings 8519, 8521, 8526, 8527, 8528 or 85430 %p/st31.12.2023ex8522908084 Blu-ray drive mechanism, whether or not recordable, for use with Blu-ray, DVD and CD discs, comprising at least: an optical pick up unit with laser diodes operating at three different wavelengths, a spindle motor, a stepping motor 0 %p/st31.12.2023ex8522908097Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 85210 %p/st31.12.2021 ex85258019 ex85258091 31 10 Camera: of a weight of not more than 5,9 kg, without a housing, of dimensions of not more than 405 mm × 315 mm, with a single Charge-Couple-Device (CCD) or Complementary Metal Oxide Semiconductor (CMOS) sensor, with effective pixels of not more than 5 megapixels, for use in closed circuit television (CCTV) surveillance systems or in appliances for eye-checks 0 %—31.12.2023 ex8525801960 Image scanning cameras, using: a Dynamic- or Static overlay lines system, an output NTSC video signal, a voltage of 6,5 V or more, an illuminance of 0,5 lux or more 0 %—31.12.2019ex8525801965 Cameras using MIPI electrical interface with: an image sensor, an objective (lens), a colour processor, a flexible printed circuit board or a printed circuit board, whether or not capable of receiving audio signals, a module dimension of not more than 15 mm × 15 mm × 15 mm, a resolution of 2 mega pixel or more (16161232 pixels and higher), whether or not wired, and a housing,

for use in the manufacture of products falling within subheading 85171200 or 84713000 0 %—31.12.2020ex8525801970 Long wavelength infrared camera (LWIR camera) (according to ISO/TS 16949), with: a sensitivity in the wavelength area of 7,5 μm or more, but not more than 17 μm, a resolution of up to 640 × 512 pixels, a weight of not more than 400 g, measurements of not more than 70 mm × 86 mm × 82 mm, whether or not in a housing, with automotive- qualified plug, and a deviation of the output signal over the entire work temperature range of not more than 20 % 0 %—31.12.2019ex8526100020Radar sensor with control unit for autonomous emergency car braking system for use in manufacture of goods of Chapter 870 %—31.12.2021ex8526912030Control unit of the emergency call system containing GSM and GPS module, for use in the manufacture of goods of Chapter 870 %—31.12.2019 ex85279199 ex85299065 20 85 Assembly consisting of at least: an audio frequency amplifier unit, comprising at least an audio frequency amplifier and a sound generator, a transformer, and a radio broadcast receiver, for use in the manufacture of consumer electronic products 0 %—31.12.2019ex8528590010 Liquid crystal display colour video monitors, excluding those combined with other apparatus, having a DC input voltage of 7 V or more but not more than 30 V, with a diagonal measurement of the screen of 33,2 cm or less: without a housing, with back cover and mounting frame, or with a housing, used for permanent incorporation or permanent mounting, during industrial assembly, into goods of Chapters 84 to 90 and 94 0 %—31.12.2023ex8528590020 Liquid crystal display colour video monitor assembly mounted on a frame, excluding those combined with other apparatus, comprising touch screen facilities, a printed circuit board with drive circuitry and power supply, used for permanent incorporation or permanent mounting into entertainment systems for vehicles 0 %—31.12.2019ex8529108060Filters, excluding surface acoustic wave filters, for a center frequency of 485 MHz or more but not more than 1990 MHz with an insertion loss of not more than 3,5 dB, contained in a housing0 %p/st31.12.2023ex8529108070 Ceramic filters: with an applicable frequency range of 10 kHz or more but no more than 100 MHz with a housing of ceramic plates provided with electrodes of a kind used in electrical-mechanical transducer or resonator in audio visual and communication equipment 0 %p/st31.12.2019ex8529906515 Electronic assembly comprising at least: a printed circuit processors for multi-media applications and video signal processing FPGA (Field Programmable Gate Array) Flash memory operating memory HDMI, VGA, USB and RJ-45 interfaces sockets and plugs for connecting a LCD-monitor, a LED lighting and a control panel 0 %p/st31.12.2020 ex85299065 ex85489090 30 44 Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing0 %p/st31.12.2023ex8529906545Satellite radio receiver module transforming satellite high frequency signals to digital audio coded signal, for use in the manufacture of products falling within heading 85270 %p/st31.12.2019ex8529906550Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 85280 %p/st31.12.2021

ex85299065 ex85299092 65 53 Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module0 %p/st31.12.2020ex8529906575 Modules comprising at least semiconductor chips for: the generation of driving signals for pixel addressing, or driving addressing pixels 0 %p/st31.12.2022ex8529906580Tuner transforming high-frequency signals into digital signal, for use in the manufacture of products falling under heading 85270 %—31.12.2019 ex85299092 ex85489090 15 60 LCD modules: solely consisting of one or more TFT glass or plastic cells, not combined with touch screen facilities, with one or more printed circuits boards with control electronics for pixel addressing only, with or without backlight unit, and with or without inverters 0 %p/st31.12.2023ex8529909225 LCD modules, not combined with touch screen facilities, solely consisting of: one or more TFT glass or plastic cells, a die cast heat sink, a backlight unit, one printed circuit board with micro controller, and LVDS (Low Voltage Differential Signalling) interface, for use in the manufacture of radios for motor vehicles 0 %p/st31.12.2020ex8529909233 LCD modules combined with touch screen facilities: solely consisting of one or more TFT cells, with a diagonal measurement of the screen of 10,7 cm or more but not more than 36 cm, with or without LED backlight, with control electronics for pixel addressing only, without an EPROM memory (Erasable Programmable Read-only Memory), with digital RGB Interface (Red, Green, Blue Interface), Touch-Screen Interface, used solely for installation in motor vehicles of Chapter 87 0 %—31.12.2022 ex8529909237 Fastening and covering ledges of aluminium alloy containing: silicon and magnesium, with a length of 300 mm or more but not more than 2200 mm, specifically shaped for use in the manufacture of TV sets 0 %—31.12.2020ex8529909242Aluminium heat sinks and cooling fins, for maintaining the operating temperature of transistors and integrated circuits, for use in the manufacture of products falling within heading 8527 or 85280 %p/st31.12.2023ex8529909243Plasma display module incorporating only address and display electrodes, with or without driver and/or control electronics for pixel address only and with or without a power supply0 %p/st31.12.2023ex8529909245Integrated circuit package with TV reception functionality containing a channel decoder die, tuner die, power management die, GSM filters and discrete as well as embedded passive circuit elements for reception of digitally broadcasting videosignals of DVB-T and DVB-H formats0 %p/st31.12.2023ex8529909247Area image sensors (progressive scan Interline CCD-Sensor or CMOS-Sensor) for digital video cameras in the form of analogue or digital, monolithic integrated circuit with pixels of not more than 12 μm × 12 μm in monochromic version with microlenses applied to each individual pixel (microlens array) or in polychromic version with a colour filter, whether or not with a lenslet (micro lens) array with one lenslet mounted on each individual pixel0 %p/st31.12.2019

ex85299092 ex85366990 49 83 AC socket with a noise filter, composed of: AC socket (for power cord connection) of 230 V, integrated noise filter composed of capacitors and inductors, cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit, whether or not equipped with a metal support, which joins the AC socket to the PDP TV set 0 %p/st31.12.2019 ex8529909251 OLED modules, consisting of one or more TFT glass or plastic cells: a diagonal measurement of the screen of 121 cm or more, but not more than 224 cm, with a thickness of not more than 55mm, containing organic material, with control electronic for pixel addressing only, with V-by-One Interface and with or without a plug for power supply, with or without back cover, of a kind used in the manufacture of TV sets and monitors 0 %—31.12.2023ex8529909255 OLED modules, consisting of: one or more TFT glass or plastic cells, containing organic material, with or without combined touch screen facilities, and one or more printed circuit boards with control electronics for pixel addressing, for use in the manufacture of TV sets and monitors or for use in the manufacture of vehicles of Chapter 87 0 %p/st31.12.2019ex8529909263 LCD module: with a diagonal measurement of the screen of 14,5 cm or more but not more than 38,5 cm, with or without a touch screen, with an LED backlight, with a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components, with a plug for power supply and CAN and LVDS interfaces, with or without electronic components for dynamic adjustments of colour, in a housing, with or without mechanical, touch-sensitive or contactless control functions and with or without active cooling system, suitable for installation in motor vehicles of Chapter 87 0 %p/st31.12.2020ex8529909265 OLED display consisting of: the organic layer with organic LEDs, two conductive layers on electron transfer and electron holes, layers of transistors (TFT) with resolution of 1920 × 1080, anode and cathode for power supply of organic diodes, RGB filter, glass or plastic protective layer, without the electronics for pixel addressing, for use in the manufacture of goods of headings 8528 0 %p/st31.12.2019 ex8529909267 Colour LCD display panel for LCD monitors of heading 8528: with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm, with or without a touch screen, with backlight, micro-controller, with a CAN (Controller area network)-controller with one or more LVDS (Low-voltage differential signalling) interfaces and one or more CAN/power supply sockets or with an APIX (Automotive Pixel Link) controller with APIX interface, in a housing with or without a heat sink at the back of the housing, without a signal-processing module, whether or not with haptic and acoustical feedback, for use in the manufacture of vehicles of Chapter 87 0 %p/st31.12.2020ex8529909270 Rectangular fastening and covering frame: of an aluminium alloy containing silicon and magnesium,

with a length of 500 mm or more but not more than 2200 mm, with a width of 300 mm or more but not more than 1500 mm, of a kind used for the production of TV sets 0 %p/st31.12.2022ex8529909285 Colour LCD module in a housing: with a diagonal screen measurement of 14,48 cm or more but not more than 26 cm, without touch screen, with a backlight and micro-controller, with a CAN (Controller Area Network) controller, an LVDS (Low-Voltage Differential Signalling) interface and a CAN/power connector, without a signal processing module, with control electronics for pixel addressing only, with a motorised mechanism for moving the display screen, for permanent installation in vehicles of Chapter 87 0 %p/st31.12.2020 ex85359000 ex85365080 30 83 Semiconductor module switch in a casing: consisting of an IGBT transistor chip and a diode chip on one or more lead frames, for a voltage of 600 V or 1200 V 0 %p/st31.12.2020 ex8536411020Photoelectric (so called photovoltaic) relay consisting of a GaAlAs light-emitting diode, a galvanically isolated input circuit with a photovoltaic generator and a power MOSFET output switch in a casing with connections for a voltage of 60 volts or less and a current of 2 amps or less0 %—31.12.2021ex8536419040 A power relay with: an electromechanical switching function, a load current of 3 amperes or more but not exceeding 16 amperes, a coil voltage of 5 volts or more but not exceeding 24 volts, a distance between the connector pins of the load circuit not more than 12,5 mm 0 %p/st31.12.2023ex8536419050Photoelectric (so called photovoltaic) relay consisting of a GaAlAs light-emitting diode, a galvanically isolated input circuit with one or two photovoltaic generators and two power MOSFET output switches in a casing with connections for a maximum voltage of 60 volts and a minimum current of 2 amps0 %—31.12.2021ex8536490030 Relays with: a nominal voltage of 12 V DC an allowable voltage of not more than 16 V DC a coil resistance at 20 °C of 26, 7 Ohm (± 10 %) a pick-up voltage at 60 °C of not more than 8,5 V a drop-out voltage at 20 °C of 1 V or more a nominal operating power at 20 °C of 5,4 Watts a switching voltage of not more than 400 V DC a permanent current-carrying capacity of not more than 120 A for use in the manufacture of batteries for electric vehicles 0 %—31.12.2020ex8536490040Photoelectric (so called photovoltaic) relay consisting of two GaAlAs light-emitting diodes, two galvanically isolated input circuits with photovoltaic generator(s) and four power MOSFET output switches in a casing with connections for a voltage of more than 60 volts0 %—31.12.2021ex8536501140 Push-button switch for keyless start for a voltage of 12 V in a plastic housing, comprising at least: printed circuit board, LED diode, connector, brackets for mounting, for use in the manufacture of goods of Chapter 87 0 %—31.12.2021 ex85365019 ex85365080 93 97 Devices, having adjustable controller and switching functions, comprising one or more monolithic integrated circuits whether or not combined with semiconductor elements, mounted together on a leadframe and contained in a plastic housing0 %p/st31.12.2023ex8536508081

Mechanical speed governer switches for connecting electrical circuits, with: a voltage of 240 V or more but not more than 250 V, an amperage of 4 A or more but not more than 6 A, for use in the manufacture of machines falling within heading 8467 0 %p/st31.12.2019ex8536508082 Mechanical switches for connecting electrical circuits, with: a voltage of 240 V or more but not more than 300 V, an amperage of 3 A or more but not more than 15 A, for use in the manufacture of machines falling within heading 8467 0 %p/st31.12.2019ex8536699051SCART type connectors, built into a plastic or metal housing, with 21 pins in 2 rows, for use in the manufacture of products falling within headings 8521 and 85280 %p/st31.12.2022ex8536699060Electrical sockets and plugs with a length of not more than 12,7 mm or a diameter of not more than 10,8 mm, for use in the production of hearing aids and speech processors0 %p/st31.12.2020ex8536699082 Modular socket or plug for local area networks, whether or not combined with other sockets, integrating at least: a pulse transformer, including a wide-band ferrite core, a common mode coil, a resistor, a capacitor, for use in the manufacture of products falling within headings 8521 or 8528 0 %p/st31.12.2019ex8536699084Universal serial bus (USB) socket or plug in a single or multiple form for connecting with other USB devices, for use in the manufacture of goods falling within headings 8521 or 85280 %p/st31.12.2020ex8536699085Socket or plug, built into a plastic or metal housing, with no more than 96 pins, for use in the manufacture of products falling within headings 8521 or 85280 %p/st31.12.2021 ex8536699086High-Definition Multimedia Interface (HDMI) type socket or plug, built into a plastic or metal housing, with 19 pins or 20 pins in 2 rows, for use in the manufacture of products falling within headings 8521 or 85280 %p/st31.12.2021ex8536700010Optical socket, plug or connector, for use in the manufacture of goods falling within headings 8521 or 85280 %p/st31.12.2021ex8536909520Semiconductor chip housing in the form of a plastic frame containing a lead frame equipped with contact pads, for voltages of not more than 1000 V0 %p/st31.12.2020ex8536909540 Rivet contacts: of copper plated with silver nickel alloy AgNi10 or with silver containing by weight 11,2 % (± 1,0 %) of tin oxide and of indium oxide taken together with a thickness of the plating of 0,3 mm (– 0/+ 0,015 mm) whether or not gilded 0 %p/st31.12.2020 ex85369095 ex85444993 94 10 Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements0 %p/st31.12.2023ex8537109150 Fuse control module in a plastic housing with mounting brackets comprising: sockets with or without fuses, connecting ports, a printed circuit board with embedded microprocessor, micro switch and relay, of a kind used in the manufacture of goods of chapter 87 0 %p/st31.12.2020 ex85371091 ex85371098 60 45 Electronic control units, manufactured according to class 2 of IPC-A-610E standard, with at least:

an AC power input of 208 V or more but not more than 400 V, a logic power input of 24 V DC, an automatic circuit breaker, a main power switch, internal or external electrical connectors and cables, in a housing with dimension of 281 mm × 180 mm × 75 mm or more, but not more than 630 mm × 420 mm × 230 mm, of a kind used for manufacturing recycling or sorting machines 0 %p/st31.12.2023 ex8537109165 Electronic control unit for optimal engine performance: with a programmable memory, with a voltage of 8 V or more but not more than 16 V, with at least one composite connector, in a metal housing, whether or not with metal holders, for use in the manufacture of motor vehicles 0 %—31.12.2022ex8537109170 Programmable memory controller for a voltage not exceeding 1000 V, of a kind used for the operation of a combustion motor and/or various actuators working with a combustion motor, comprising at least: a printed circuit with active and passive components, an aluminium housing, and multiple connectors 0 %p/st31.12.2022ex8537109830 Motor bridge ICs without programmable memory consisting of: one or more integrated circuits, not interconnected, on separate lead frames, also with discrete Metal Oxide Field Effect Transistors (MOSFET) for controlling DC motors in cars, mounted in a plastic housing 0 %p/st31.12.2023ex8537109835 Electronic control unit without memory, for a voltage of 12 V, for information exchange systems in vehicles (for connection of audio, telephony, navigation, camera and wireless car service) containing: 2 rotary knobs 27 or more pushbuttons LED lights 2 integrated circuits for receiving and sending of control signals via the LIN-bus 0 %p/st31.12.2020ex8537109840 Electronic control unit for monitoring car vehicle tyre pressure comprising plastic box with printed circuit board inside and with or without metal holder, of: a length of 50 mm or more, but not more than 120 mm, a width of 20 mm or more but not more than 40 mm, a height of 30 mm or more, but not more than 120 mm, of a kind used in the manufacture of goods of Chapter 87 0 %p/st31.12.2019 ex8537109850 Electronic control unit BCM (Body Control Module) comprising: plastic box with printed circuit board and metal holder, with voltage of 9 V or more, but not more than 16 V, able to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminder, of a kind used in the manufacture of goods of Chapter 87 0 %p/st31.12.2019ex8537109860 Electronic assembly consisting of: a microprocessor, light-emitting diode (LED) or liquid crystal display (LCD) indicators, electronic components mounted on a printed circuit, for use in the manufacture of built-in products of headings 85142080, 85165000 and 85166080 0 %p/st31.12.2019ex8537109865 Lever for control module under the steering wheel: with one or more single or multi-positional electrical switches (push-button, rotary or other), whether or not equipped with printed circuit boards and electrical cables,

for a voltage of 9 V or more but not more than 16 V, of a kind used in the manufacture of motor vehicles of Chapter 87 0 %p/st31.12.2021ex8537109875 Control unit for keyless access to vehicle and vehicle starting, with electrical switching apparatus, in a plastic housing, for a voltage of 12 V, whether or not with: an antenna, a connector, a metal holder, for use in the manufacture of goods of Chapter 87 0 %p/st31.12.2021ex8537109893Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle mounted temperature control systems0 %p/st31.12.2023 ex85389091 ex85389099 20 50 Interior antenna for a car door locking system, comprising: an antenna module in a plastic housing, a connection cable with a plug, at least two mounting brackets, whether or not PCB including integrated circuits, diodes and transistors, of a kind used in the manufacture of goods of CN heading 8703 0 %p/st31.12.2020 ex85389099 ex85472000 30 10 Polycarbonate or acrylonitrile butadiene styrene covers and cases for steering pad switches whether or not coated on the outside with a scratch resistant paint0 %p/st31.12.2019ex8538909940Polycarbonate control interface buttons for steering pad switches coated on the outside with scratch resistant paint, in immediate packages of 500 pieces or more0 %p/st31.12.2019ex8538909960Front control panel, in the form of a plastic box, with light guides, rotary switches, pressure switches and buttons switches, or other type of switches, without any electrical component, of a kind used in the dashboard of motor vehicles of Chapter 870 %p/st31.12.2021ex8538909995Copper base plate, of a kind used as a heatsink in the manufacture of IGBT modules containing more components than IGBT chips and diodes with a voltage of 650 V or more but not more than 1200 V0 %p/st31.12.2023ex8540208091Photomultiplier0 %—31.12.2021ex8540710020Continuous wave magnetron with a fixed frequency of 2460 MHz, packaged magnet, probe output, for use in the manufacture of products falling within subheading 851650000 %—31.12.2023ex8540890091Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300 mm × 350 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons0 %—31.12.2023ex8540890092Vacuum fluorescent display tube0 %—31.12.2023ex8540910020 Thermionic electron source (emitter point) of lanthanum hexaboride (CAS RN 12008-21-8) or cerium hexaboride (CAS RN 12008-02-5), in a metal housing with electric connectors having: a graphite carbon shield mounted in a mini-Vogel type system separate pyrolytic carbon blocks used as heating elements and a cathode temperature of less than 1800 K at a filament current of 1,26 A 0 %—31.12.2022

ex8543709015 Laminated electrochromic film consisting of: two outer layers of polyester, a middle layer of acrylic polymer and silicone, and two electric connection terminals 0 %—31.12.2021ex8543709030Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in a housing0 %p/st31.12.2023ex8543709033High-frequency amplifier comprising one or more integrated circuits and one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing0 %—31.12.2021ex8543709034Gallium nitride (GaN) high-frequency amplifier consisting of one or more discrete transistors, one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing0 %—31.12.2021ex8543709035Radio frequency (RF) modulator, operating with a frequency range of 43 MHz or more but not more than 870 MHz, capable of switching VHF and UHF signals, consisting of active and passive elements mounted on a printed circuit, contained in a housing0 %p/st31.12.2023ex8543709045Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1,8 MHz to 67 MHz, contained in a housing0 %p/st31.12.2023ex8543709055Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing0 %p/st31.12.2023ex8543709080Temperature compensated oscillator, comprising a printed circuit on which are mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a housing0 %p/st31.12.2023ex8543709085Voltage controlled oscillator (VCO), other than temperature compensated oscillators, consisting of active and passive elements mounted on a printed circuit, contained in a housing0 %p/st31.12.2023ex8543709095 Mobile telephone view and control module comprising of: a mains power/ CAN (Controller area network) output socket, a universal serial bus (USB) and audio IN/OUT ports, and incorporating a video switching device for the interface of smart phone operating systems with the Media Orientated Systems Transport network (MOST), for use in the manufacture of vehicles of Chapter 87 0 %p/st31.12.2020 ex85442000 ex85444290 ex85444993 10 20 20 PET/PVC insulated flexible cable with: a voltage of not more than 60 V, a current of not more than 1 A, a heat resistance of not more than 105 °C, individual wires of a thickness of not more than 0,1 mm (± 0,01 mm) and a width of not more than 0,8 mm (± 0,03 mm), a distance between conductors of not more than 0,5 mm, and a pitch (distance from centreline to centreline of conductors) of not more than 1,25 mm 0 %—31.12.2023ex8544200030 Antenna connecting cable for the transmission of radio (AM/FM) signal and whether or not GPS signal, containing:

a coaxial cable, two or more connectors, and 3 or more plastic clips for attachment to the dashboard, of a kind used in the manufacture of goods of Chapter 87 0 %—31.12.2021ex8544300030 Multi-measurement wire harness of a voltage of 5 V or more but not more than 90 V capable of measuring some or all of the following: a travel speed of not more than 24 km/h a motor speed of not more than 4500 rpm hydraulic pressure of not more than 25 MPa mass of not more than 50 metric tonnes for use in the manufacture of vehicles of heading 8427 0 %p/st31.12.2023ex8544300035 Wire harness: with an operation voltage of 12V, wrapped in tape or covered in plastic convoluted tubing, with 16 or more strands, with all terminals to be tin plated or equipped with connectors, for use in the manufacture of all-terrain or utility task vehicles 0 %—31.12.2021 ex85443000 ex85444290 40 40 Wire harness of the steering system with an operating voltage of 12 V, equipped with connectors on both sides, having at least 3 plastic anchor clamps for mounting on a motor vehicle steering box0 %p/st31.12.2019 ex85443000 ex85444290 60 50 Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, of kind used in the manufacture of goods of Chapter 870 %—31.12.2020 ex8544300070 Multi-measurement wire harness: of a voltage of 5 V or more but not more than 90 V, capable of transmitting information, for use in the manufacture of vehicles of heading 8711 0 %p/st31.12.2019 ex85443000 ex85444290 85 65 Extension two-core cable with two connectors, containing at least: a rubber grommet, a metal attachment bracket, of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 87 0 %p/st31.12.2020ex8544429010 Data transmission cable capable of a bit rate transmission of 600 Mbit/s or more, with: a voltage of 1,25 V (± 0,25 V), connectors fitted at one or both ends, at least one of which contains pins with a pitch of 1 mm, outer screening shielding, used solely for communication between LCD, PDP or OLED panel and video processing electronic circuits 0 %p/st31.12.2023ex8544429015 PVC isolated flexible eight wire cable with: a length of not more than 2100 mm, an operating voltage of 5 V or more, but not more than 35 V, a temperature resistance of not more than 80 °C, either an over-moulded 7 pin round 270° DIN male connector, a 6 pin A1101 male connector or a 8 pin A1001 male connector on one end, and at least two stripped and tinned wires on the other end, whether or not with mounted rubber pad with integrated strain relief 0 %—31.12.2023ex8544429025 PVC isolated flexible cable with: a length of not more than 1800 mm, an operating voltage of 5V or more, but not more than 35V, a heat resistance of not more than 80 °C, an over-moulded 8 pin MiniFit male connector on one end, either a 6 pin MiniFit socket or two over-moulded AMP connectors on the other end, a over-moulded resistor inside the connector, and

a moulded strain relief on the cable, whether or not with a over-moulded diode inside a connector 0 %—31.12.2023 ex8544429035 PVC isolated flexible six or eight wire cable with: a length of not more than 1300 mm, an operating voltage of 5 V or more, but not more than 35 V, a heat resistance of not more than 80 °C, either an over-moulded 8 pin MiniFit male connector or an over-moulded 6-pin DIN male connector on one end, and either an over-moulded 8 pin MiniFit socket or an 8 pin MicroFit male connector on the other end 0 %—31.12.2023ex8544429070 Electric conductors: of a voltage of not more than 80 V, with a length of not more than 120 cm, fitted with connectors, for use in the manufacture of hearing aids, accessory kits and speech processors 0 %p/st31.12.2020ex8544429080 12-wire connecting cable containing two connectors: of a voltage of 5 V, with a length of not more than 300 mm, for use in the manufacture of goods of Chapter 87 0 %p/st31.12.2021ex8544499110 Insulated copper electrical wires: with individual conductor wires of a diameter exceeding 0,51 mm, for a voltage of not more than 1000 V, for use in the manufacture of automotive cable harnesses 0 %m31.12.2019ex8544499330 Electric conductors: of a voltage of not more than 80 V, of a platinum-iridium-alloy, coated with poly(tetrafluoroethylene), without connectors, for use in the manufacture of hearing aids, implants and speech processors 0 %m31.12.2020ex8545909020Carbon fibre paper of a kind used for gas diffusion layers in fuel cell electrodes0 %—31.12.2020ex8548102910Spent lithium-ion or nickel metal hydride electric accumulators0 %—31.12.2023ex8548909041Unit, consisting of a resonator operating within a frequency range of 1,8 MHz or more but not more than 40 MHz and a capacitor, contained in a housing0 %p/st31.12.2023ex8548909043Contact image sensor0 %p/st31.12.2023 ex8548909048 Optical unit, containing at least: a laser diode and a photodiode operating at a typical wavelength of 635 nm or more but not more than 815 nm an optical lens a Recording Photodetector Integrated Circuit (PDIC) a focussing and tracking actuator 0 %p/st31.12.2021ex8548909065 LCD modules: solely consisting of one or more TFT glass or plastic cells, combined with touch screen facilities, with one or more printed circuits boards with control electronics for pixel addressing only, with or without backlight unit, and with or without inverters 0 %p/st31.12.2023 ex87081010 ex87081090 10 10 Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of Chapter 870 %p/st31.12.2021 ex87083010 ex87083091 ex87083099 20 60 10 Motor powered brake actuation unit with a rating of 13,5 V (± 0,5 V), and a ball screw mechanism to control brake fluid pressure in the master cylinder, for use in the manufacture of electric motor vehicles 0 %p/st31.12.2019 ex87083010 ex87083091 40 30 Body of disc type brake in BIR (Ball in Ramp) or EPB (Electronic Parking Brake) or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2019

ex87083010 ex87083091 50 10 Drum type parking brake: operating within the service brake disk, with a diameter of 170 mm or more but not more than 195 mm, for use in the manufacture of motor vehicles 0 %p/st31.12.2021 ex87083010 ex87083091 60 20 Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 870 %p/st31.12.2019 ex87083010 ex87083091 70 40 Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2020 ex87084020 ex87084050 20 10 Automatic hydrodynamic gearbox: with a hydraulic torque converter, without transfer box and cardan shaft, whether or not with front differential, for use in the manufacture of motor vehicles of Chapter 87 0 %p/st31.12.2020ex8708402030 Automatic gearbox with a hydraulic torque converter with: at least eight gears, an engine torque of 300 Nm or more, and transverse or longitudinal installation, for use in the manufacture of motor vehicles of heading 8703 0 %p/st31.12.2022 ex87084020 ex87084050 40 30 Gear box assembly with one or two inputs and at least three outputs in cast aluminium housing with overall dimensions (excluding the shafts) of not more than 455 mm (width) × 462 mm (height), 680 mm length, equipped with at least: one exterior-splined output shaft, a rotary switch to indicate gear position, the potential for a differential, for use in the manufacture of all-terrain or utility task vehicles 0 %p/st31.12.2021 ex87084020 ex87084050 50 40 Transmission assembly which houses 3 other shafts inside it and offers a rotating switch for shift position consisting: cast aluminium body, differential gear, 2 electrical motors and gears, with the dimensions of: a width of 300 mm or more but not more than 350 mm, a height of 420 mm or more but not more than 500 mm, a length of 500 mm or more but not more than 600 mm, for use in the manufacture of motor vehicles of Chapter 87 0 %—31.12.2022 ex87085020 ex87085099 20 10 Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle: of a length of 1 m or more but not more than 2 m, of a weight of 6 kg or more but not more than 9 kg 0 %p/st31.12.2020 ex87085020 ex87085099 ex87089910 ex87089997 40 30 70 80 Single input, dual output gearcase (transmission) in cast aluminium housing, with overall dimensions not exceeding 148 mm (± 1 mm) × 213 mm (± 1 mm) × 273 mm (± 1 mm) comprising at least: two electro-magnetic one direction clutches in one cage, working in both directions, an input shaft with outer diameter of 24 mm (± 1 mm), ended with spline of 22, a coaxial output bushing with inner diameter of 22 mm or more but not more than 30 mm, ended with spline of 22 teeth or more but not more than 28 teeth, for use in the manufacture of all-terrain or utility task vehicles 0 %p/st31.12.2021 ex87085020 ex87085055 ex87085091 ex87085099 50 20 10 40 Double flange bearing of 3rd generation, for motor vehicles:

with double-row ball bearing, whether or not with impulse (encoder) ring, whether or not with antilock brake system (ABS) sensor, whether or not with mounted screws, for use in the manufacture of goods of chapter 87 0 %—31.12.2022 ex87088020 ex87088035 10 10 Upper strut insulator containing: a metal holder with three mounting screws, and a rubber bump, of a kind used in the manufacture of goods of Chapter 87 0 %p/st31.12.2020 ex87088020 ex87088091 20 10 Rear chassis arm with a protective plastic label equipped with two metal casings with pressed-in rubber silent blocks, of kind used in the manufacture of goods of Chapter 870 %p/st31.12.2020 ex87088020 ex87088091 30 20 Rear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, of kind used in the manufacture of goods of Chapter 870 %p/st31.12.2020ex8708809910Stabilizer bar for front axle equipped with a ball pivot on both ends for use in the manufacture of goods of Chapter 870 %p/st31.12.2021 ex87089120 ex87089135 20 10 Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2019 ex87089120 ex87089199 30 30 Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with: an insulating area flatness of not more than 0,1 mm, a permissible particle quantity of 0,3 mg per tank, a distance between pores of 2 mm or more, pore sizes of not more than 0,4 mm, and not more than 3 pores larger than 0,2 mm, of a kind used in heat exchangers for car cooling systems 0 %p/st31.12.2020 ex87089199 ex87089997 40 55 Assembly for supplying compressed air, whether or not with a resonator, comprising at least: one solid aluminium tube whether or not with mounting bracket, one flexible rubber hose, and one metal clip, for use in the manufacture of goods of Chapter 87 0 %—31.12.2022 ex87089310 ex87089390 10 10 Mechanically operated clutch for use with an elastomeric belt in a dry environment in a CVT (Continuously Variable Transmission) gear case: designed to be bolted onto a splined shaft of outer diameter 23 mm, with an overall diameter of not more than 266 mm (± 1 mm), comprised of 2 sheaves with tapered faces, sheaves having taper of 13 degrees each, having a main compression spring used to resist displacement between sheaves, and comprised of a cam or spring to maintain proper belt tension, for use in the manufacture of all-terrain vehicles or utility task vehicles 0 %—31.12.2021 ex87089310 ex87089390 30 30 Mechanically operated centrifugal clutch for use with an elastomeric belt in a dry environment in a continuously variable transmission (CVT), equipped with: elements that activate the clutch at given rotation and generate (in this way) centrifugal force, shaft ended with 5 or more but not more than 6 degree taper, 3 weights, and 1 compression spring, for use in the manufacture of all-terrain or utility task vehicles 0 %p/st31.12.2021 ex87089420 ex87089435 10 20 Rack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2019

ex87089510 ex87089599 10 20 Inflatable safety cushion of high strength polyamide fibre sewn folded into three-dimensional packing form, fixed by thermal forming 0 %p/st31.12.2020 ex87089510 ex87089599 20 30 Inflatable safety cushion of high strength polyamide fibre: sewn, folded, with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing, suitable for cool inflator technology 0 %p/st31.12.2020 ex87089910 ex87089997 10 60 Six-layer composite fuel tank assembly comprising of: a fuel inlet, a pump flange assembly (PFA), a ventilation with rollover valve mounted on the top of the tank, and threated holes for PFA assembly, for use in the manufacture of all-terrain or utility task vehicles 0 %—31.12.2021 ex87089910 ex87089997 25 45 Plastic air guide for directing air flow to the surface of intercooler for use in the production of motor vehicles0 %—31.12.2023 ex87089910 ex87089997 35 35 Holder of front radiator or intercooler whether or not with rubber cushioning for use in the manufacture of goods of Chapter 870 %p/st31.12.2021 ex87089910 ex87089997 40 25 Support bracket of iron or steel, with mounting holes, whether or not with fixation nuts, for connecting the gearbox to the car body for use in the manufacture of goods of Chapter 870 %p/st31.12.2021ex8708999785 Electroplated interior or exterior parts consisting of: a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, layers of copper, nickel and chromium, for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705 0 %p/st31.12.2022ex8714109010 Inner tubes: of SAE1541 carbon steel with a hard chromium layer of 20 μm (+ 15 μm/– 5 μm) having a wall thickness of 1,45 mm or more, but not more than 1,5 mm having an elongation at break of 15 % perforated of a kind used for the production of motorcycle fork rods 0 %p/st31.12.2020 ex8714109020Radiators of a kind used in motor bikes for fitting of attachments0 %p/st31.12.2020ex8714109050 Suspension damper tubes: of 7050-t73 aluminium alloy, anodised on the inner surface, with a mean roughness (Ra) of the inner surface of not more than 0,4 and a maximum roughness height (Rt) of the inner surface of not more than 4,0 0 %—31.12.2021 ex87149110 ex87149110 ex87149110 23 33 70 Frame, constructed from aluminium or aluminium and carbon fibres, for the use in the manufacture of bicycles (including e-bikes)0 %—31.12.2023 ex87149130 ex87149130 ex87149130 25 35 72 Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles0 %—31.12.2023ex8714961010Pedals, for use in the manufacture of bicycles0 %—31.12.2020 ex87149910 ex87149910 20 89 Bicycle handlebars: with or without integrated stem, either made out of carbon fibres and synthetic resin or made of aluminium, for use in the manufacture of bicycles 0 %—31.12.2022ex8714999030Seat posts, for use in the manufacture of bicycles0 %p/st31.12.2020ex9001109010Image reverser made up from an assembly of optical fibres0 %—31.12.2023ex9001109030

Polymer optical fibre with: a poly(methyl methacrylate) core, a cladding of fluorinated polymer, a diameter of not more than 3,0 mm, and a length of more than 150 m, of a kind used in the manufacture of polymer fibre cables 0 %—31.12.2021 ex90011090 ex90019000 40 18 Fibre optic plates: uncoated and unpainted, of a length of 30 mm or more, but not more than 234,5 mm, of a width of 7 mm or more, but not more than 28 mm, and of a height of 0,5 mm or more, but not more than 3 mm, of a kind used in dental x-ray systems 0 %—31.12.2021 ex9001200010Material consisting of a polarising film, whether or not on rolls, supported on one or both sides by transparent material, whether or not with an adhesive layer, covered on one side or on both sides with a release film0 %—31.12.2022 ex90012000 ex90019000 20 55 Optical, diffuser, reflector or prism sheets, unprinted diffuser plates, whether or not possessing polarising properties, specifically cut0 %—31.12.2023 ex90015041 ex90015049 40 40 Organic uncut corrective eyeglass lens, finished on both sides, to undergo a coating, colouring, edging, mounting or any other substantial process for use in the manufacture of corrective glasses0 %—31.12.2022ex9001508030Round organic uncut, semi-finished eyeglass lens with corrective effect, finished on one side, of a kind used for the manufacture of finished eyeglass lenses0 %—31.12.2021ex9001900035Rear projection screen, comprising a lenticular plastic plate0 %p/st31.12.2023ex9001900045Rod of neodymium-doped yttrium-aluminium garnet (YAG) material, polished at both ends0 %p/st31.12.2023ex9001900065Optical film with a minimum of 5 multi-layer structures, including a back side reflector, a front side coating and a contrast filter with a pitch of not more than 0,65 μm, for use in the manufacture of front projection screens0 %—31.12.2019ex9001900070Poly(ethylene terephthalate) film with a thickness of less than 300 μm according to ASTM D2103, having on one side prisms of acrylic resin with a prism angle of 90° and a prism pitch of 50 μm0 %—31.12.2021ex9001900085 Light guide panel made of poly(methyl methacrylate): whether or not cut, whether or not printed, for use in the manufacture of backlight units for flat screen TVs 0 %—31.12.2020 ex90021100 ex90021900 15 10 Infrared lens with motorised focus adjustment, using wavelengths of 3 μm or more but not more than 5 μm, providing a clear picture from 50 m to infinity, with fields of vision sizes of 3° × 2,25° and 9° × 6,75 °, with a weight of not more than 230 g, with a length of not more than 88 mm, with a diameter of not more than 46 mm, athermalised, for use in the manufacture of thermal imaging cameras, infrared binoculars, weapons scopes 0 %—31.12.2020 ex9002110020 Lenses: measuring not more than 80 mm × 55 mm × 50 mm, with a resolution of 160 lines/mm or better, and with a zoom ratio of 18 times, of a kind used for the production of visualizers or live image cameras 0 %—31.12.2022 ex90021100 ex90021900 25 20 Infrared optical unit composed of:

a monocrystalline silicon lens with a diameter of 84 mm (± 0,1 mm), and a monocrystalline germanium lens with a diameter of 62 mm (± 0,05 mm), assembled on a machined aluminum alloy support, of a kind used for thermal imaging cameras 0 %—31.12.2021 ex90021100 ex90021900 35 30 Infrared optical unit composed of: a silicon lens with a diameter of 29 mm (± 0,05 mm), and a monocrystalline calcium fluoride lens with a diameter of 26 mm (± 0,05 mm), assembled on a machined aluminum alloy support, of kind a used for thermal imaging cameras 0 %—31.12.2021 ex90021100 ex90021900 45 40 Infrared optical unit: with a silicon lens of a diameter of 62 mm (± 0,05 mm), mounted on a machined aluminum alloy support, of a kind used for thermal cameras 0 %—31.12.2021ex9002110050 Lens unit: having a focal length of 25 mm or more but not more than 150 mm, consisting of glass or plastic lenses, with a diameter of 60 mm or more but not more than 190 mm 0 %—31.12.2023 ex90021100 ex90021900 55 50 Infrared optical unit composed of: a germanium lens with a diameter of 11 mm (± 0,05 mm), a monocrystalline calcium fluoride lens with a diameter of 14 mm (± 0,05 mm), and a silicon lens with a diameter of 17 mm (± 0,05 mm), assembled on a machined aluminum alloy support, of a kind used for thermal imaging cameras 0 %—31.12.2021 ex90021100 ex90021900 65 60 Infrared optical unit: with a silicon lens with a diameter of 26 mm (± 0,1 mm), mounted on a machined aluminum alloy support, of a kind used for thermal imaging cameras 0 %—31.12.2021 ex90021100 ex90021900 75 70 Infrared optical unit composed of: a germanium lens with a diameter of 19 mm (± 0,05 mm), a monocrystalline calcium fluoride lens with a diameter of 18 mm (± 0,05 mm), a germanium lens with a diameter of 20,6 mm (± 0,05 mm), assembled on a machined aluminum alloy support, of a kind used for thermal imaging cameras 0 %—31.12.2021ex9002110085 Lens assembly with: a horizontal field of view range of 50 deg or more, but not more than 200 deg, a focal length of 1,16 mm or more, but not more than 5,45 mm, a relative aperture of F/1,8 or more but not more than F/2,6, a diameter of 5 mm or more but not more than 18,5 mm, for use in the manufacture of CMOS automotive cameras 0 %—31.12.2019ex9002900030Optical unit, comprising 1 or 2 rows of optical glass fibres in the form of lenses and with a diameter of 0,85 mm or more but not more than 1,15 mm, embedded between 2 plastic plates0 %p/st31.12.2023ex9002900040Mounted lenses made from infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material0 %p/st31.12.2022 ex9013809030 Electronic semiconductor micro-mirror in a housing suitable for the automatic printing of conductor boards, mainly consisting of: one or more microelectromechanical mirrors (MEMS) manufactured with semiconductor technology, with a drive arranged in three-dimensional structures on the semiconductor material, whether or not in a combination with one or more monolithic application-specific integrated circuits (ASIC),

of a kind used for incorporation into products of Chapters 84-90 and 95 0 %p/st31.12.2019ex9025804030 Electronic barometric semiconductor pressure sensor in a housing, mainly consisting of: a combination of one or more monolithic application-specific integrated circuits (ASIC), and at least one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material 0 %p/st31.12.2023ex9025804050 Electronic semiconductor sensor for measuring at least two of the following quantities: Atmospheric pressure, temperature, (also for temperature compensation), humidity, or volatile organic compounds, in a housing suitable for the automatic printing of conductor boards or Bare Die technology, containing: one or more monolithic application-specific integrated circuits (ASIC), one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material, of a kind used for incorporation into products of Chapters 84-90 and 95 0 %p/st31.12.2019ex9027109010Sensor element for gas or smoke analysis in motor vehicles, essentially consisting of a zirconium-ceramic element in a metal housing0 %—31.12.2019ex9029100030Speed sensor using the Hall effect for measuring wheels rotation in a motor vehicle equipped with plastic housing and attached to connecting cable with a joining connector and mounting holders of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2019 ex90292031 ex90299000 10 20 Clustered instrument panel with the microprocessor control board, stepping motors and LED indicators showing at least: speed, engine revolutions, engine temperature, the fuel level, communicating via CAN-BUS and K-LINE protocols, of a kind used in the manufacture of goods of Chapter 87 0 %p/st31.12.2019ex9030310020 Automotive battery sensor for measuring voltage, current and temperature with: a measuring unit, voltage regulator, micro-controller and LIN-Transceiver, a battery pole terminal, LIN-connector and ground cable, for use in the manufacture of motor vehicles 0 %—31.12.2023ex9032890030Electronic controller of electric power steering (EPS controller)0 %p/st31.12.2023ex9032890040Digital valve controller for controlling liquids and gases0 %p/st31.12.2022ex9032890050 Gas panel for regulating and controlling of the gas flow rate, working with plasma technology, comprising: an electronic mass flow regulator, suitable for receiving and sending of analogue and digital signals, four pressure transducers, two or more pressure valves, electric interfaces, and several connectors for gas lines, suitable for in-situ plasma bonding processes or for multi frequency bond activating processes 0 %—31.12.2021ex9401908010Ratchet disk of a kind used in the manufacture of reclining car seats0 %p/st31.12.2020ex9401908060Outer part of a headrest made of perforated bovine leather, lined with a scrim-reinforced lamination liner and without foam padding, after reworking (stitching of the leather and embroidery application) used in manufacture of seats of motor vehicles0 %—31.12.2020

ex95030075 ex95030095 10 10 Plastic cable car scale models, whether or not with a motor, for printing0 %p/st31.12.2020ex9607201010Sliders, narrow tape with mounted zipper teeth, pin/boxes and other parts of slide fasteners, of base metal for use in the manufacture of zippers0 %—31.12.2020 ex9607209010Narrow strips mounted with plastic chain scoops for use in the manufacture of zippers0 %—31.12.2020ex9608910010Non-fibrous plastic pen-tips with an internal canal0 %—31.12.2023ex9608910020Felt tips and other porous-tips for markers, without internal canal0 %—31.12.2023ex9612101010Ribbons of plastic with segments of different colours, providing the penetration of dyes by heat into a support (so called dye-sublimation)0 %—31.12.2023