Council Regulation (EU) 2019/2220 of 19 December 2019 amending Regulation (EU) No 1388/2013 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products

Council Regulation (EU) 2019/2220 of 19 December 2019 amending Regulation (EU) No 1388/2013 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products THE COUNCIL OF THE EUROPEAN UNION, Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof, Having regard to the proposal from the European Commission, Whereas: (1) In order to ensure a sufficient and uninterrupted supply of certain agricultural and industrial products which are produced in insufficient quantities in the Union and thereby avoid any disturbances on the market for those products, autonomous tariff quotas were opened by Council Regulation (EU) No 1388/2013 Council Regulation (EU) No 1388/2013 of 17 December 2013 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products, and repealing Regulation (EU) No 7/2010 (OJ L 354, 28.12.2013, p. 319). . Within those tariff quotas, products can be imported into the Union at reduced or zero duty rates. (2) As it is in the Union’s interest to ensure an adequate supply of certain industrial products and having regard to the fact that identical, equivalent or substitute products are not produced in sufficient quantities within the Union, it is necessary to open new tariff quotas with order numbers 09.2586 to 09.2593 inclusive at zero duty rates for appropriate quantities of those products. (3) In the case of tariff quotas with order numbers 09.2594, 09.2595, 09.2596, 09.2597, 09.2598, 09.2599, 09.2738, 09.2742 and 09.2872, the quota volumes should be increased, as an increase is in the interest of the Union. (4) For the tariff quota with order number 09.2738, the reference to tin in the product description should be replaced with zinc. (5) For the tariff quotas with order numbers 09.2595, 09.2596, 09.2597, 09.2598 and 09.2599, the quota period should be prolonged from six months to one year. (6) As the scope of the tariff quota with order number 09.2652 has become inadequate to fulfil the needs of the economic operators in the Union, the description of the product covered by this quota should be amended. (7) The products covered by the tariff quota with order number 09.2740 are classifiable under TARIC code 2309903187 and not under TARIC code 2309909697. The indication of the applicable CN code and TARIC subheading for those products should therefore be amended. (8) As it is no longer in the Union’s interest to maintain the tariff quotas with order numbers 09.2690, 09.2850, 09.2878, 09.2906, 09.2909, 09.2929 and 09.2932, they should be closed with effect from 1 January 2020. (9) For the tariff quota with order number 09.2828, it is in the interest of the Union to apply the quota only from 1 April to 31 October of each year, which are the months with the highest demand for the products concerned, and to reduce the volume by half. (10) The tariff quota with order number 09.2722 has been applied simultaneously with a suspension of tariff duties in accordance with Council Regulation (EU) No 1387/2013

Council Regulation (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011 (OJ L 354, 28.12.2013, p. 201). from 1 July 2019 to 31 December 2019. As that suspension should be closed with effect from 1 January 2020, it is in the interest of the Union to increase the quota volume. (11) The substances Dimethyl Sulphate (CAS RN 77-78-1), 2‐Methylaniline (CAS RN 95‐53‐4) and 4,4'-Methanediyldianiline (CAS RN 101-77-9) are included on the candidate list referred to in Article 59 of Regulation (EC) No 1907/2006 of the European Parliament and of the Council Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC (OJ L 396, 30.12.2006, p. 1). and the substance with CAS RN 101-77-9 is included in Annex XIV to that Regulation. For that reason, existing tariff quotas for such products will be progressively closed and any newly opened tariff quotas will apply for a limited period. Therefore, the tariff quotas with order numbers 09.2648 and 09.2730 should apply only from 1 January 2020 to 30 June 2020 and the relevant quota volumes should be reduced in proportion. The tariff quota with order number 09.2590 should only be opened for the same period. (12) The early exhaustion of the tariff quota with order number 09.2872 indicated that demand for the product covered by this tariff quota is high and that the production capacity in the Union is insufficient to cover that demand. To enhance the competitive capacity of Union enterprises, the quota volume should be increased with a retroactive effect to cover the period from 1 January 2019 to 31 December 2019. (13) Taking into account the amendments to be made and for the sake of clarity, the Annex to Regulation (EU) No 1388/2013 should be replaced. (14) In order to avoid any interruption of the application of the tariff quota scheme and to comply with the guidelines set out in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the tariff quotas for the products concerned should apply from 1 January 2020 and, for the tariff quota with order number 09.2872, from 1 January 2019. This Regulation should therefore enter into force as a matter of urgency, HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) No 1388/2013 is amended as follows: (1) the row for the tariff quota with order number 09.2872 is replaced by the following: 09.2872ex2833298040Caesium sulphate (CAS RN 10294-54-9) in solid form or as aqueous solution containing by weight 48 % or more but not more than 52 % of caesium sulphate1.1.-31.12.200 tonnes0 %

(2) it is replaced by the text set out in the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union. It shall apply from 1 January 2020. However, point (1) of Article 1 shall apply from 1 January 2019 to 31 December 2019. This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 19 December 2019. For the Council The President K. Mikkonen

Annex

ANNEX However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings. Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1). Only the ad valorem duty is suspended. The specific duty shall continue to apply. Order numberCN codeTARICDescriptionQuota periodQuota volumeQuota duty (%)09.2637 ex07104000 ex20058000 20 30 Corn cobs (Zea mays var. saccharata) whether or not cut, with a diameter of 10 mm or more, but not more than 20 mm, for use in the manufacture of products of the food industry for treatment other than simple repacking1.1.-31.12.550 tonnes0 %09.2849ex0710806910Mushrooms of the species Auricularia polytricha (uncooked or cooked by steaming or boiling), frozen, for the manufacture of prepared meals1.1.-31.12.700 tonnes0 %09.2664ex2008603930Sweet cherries containing added spirit, with a sugar content of not more than 9 % by weight, of a diameter of not more than 19,9 mm, with stones, for use in chocolate products1.1.-31.12.1000 tonnes10 %09.2740ex2309903187 Soya bean protein concentrate containing by weight: 60 % (± 10 %) of crude protein, 5 % (± 3 %) of crude fibre, 5 % (± 3 %) of crude ash, and 3 % or more but not more than 6,9 % of starch, for use in the manufacture of animal feed products 1.1.-31.12.30000 tonnes0 %09.2913 ex24011035 ex24011070 ex24011095 ex24011095 ex24011095 ex24012035 ex24012070 ex24012095 ex24012095 ex24012095 91 10 11 21 91 91 10 11 21 91 Natural unmanufactured tobacco, whether or not cut in regular size, having a custom value of not less than Euro 450 per 100 kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 240210001.1.-31.12.6000 tonnes0 %09.2586 ex27101981 ex27101999 20 40 Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing: 90 % or more by weight of saturates, and not more than 0,03 % by weight of sulphur, and with: a viscosity index of 80 or more, but less than 120, and a kinematic viscosity of 5,0 cSt at 100 °C or more, but not more than 13,0 cSt at 100 °C 1.1.-30.6.200000 tonnes0 % 09.2587 ex27101981 ex27101999 20 40 Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing: 90 % or more by weight of saturates, and

not more than 0,03 % by weight of sulphur, and with: a viscosity index of 80 or more, but less than 120, and a kinematic viscosity of 5,0 cSt at 100 °C or more, but not more than 13,0 cSt at 100 °C 1.7.-31.12.200000 tonnes0 %09.282827122090Paraffin wax containing by weight less than 0,75 % of oil1.4.-31.10.60000 tonnes0 %09.2600ex2712903910Slack wax (CAS RN 64742-61-6)1.1.-31.12.100000 tonnes0 %09.2928ex2811220040Silica filler in the form of granules, with a purity by weight of 97 % or more of silicon dioxide1.1.-31.12.1700 tonnes0 %09.2806ex2825904030Tungsten trioxide, including blue tungsten oxide (CAS RN 1314-35-8 or CAS RN 39318-18-8)1.1.-31.12.12000 tonnes0 %09.2872ex2833298040Caesium sulphate (CAS RN 10294-54-9) in solid form or as aqueous solution containing by weight 48 % or more but not more than 52 % of caesium sulphate1.1.-31.12.200 tonnes0 %09.2837ex2903793020Bromochloromethane (CAS RN 74-97-5)1.1.-31.12.600 tonnes0 %09.2933ex29039980301,3-Dichlorobenzene (CAS RN 541-73-1)1.1.-31.12.2600 tonnes0 %09.2700ex2905120010Propan-1-ol (propyl alcohol) (CAS RN 71-23-8)1.1.-31.12.15000 tonnes0 %09.2830ex2906190040Cyclopropylmethanol (CAS RN 2516-33-8)1.1.-31.12.20 tonnes0 %09.2851ex2907120010o-cresol (CAS RN 95-48-7) having a purity of not less than 98,5 % by weight1.1.-31.12.20000 tonnes0 %09.2704ex29094980202,2,2',2'-Tetrakis(hydroxymethyl)-3,3'-oxydipropan-1-ol (CAS RN 126-58-9)1.1.-31.12.500 tonnes0 %09.262429124200Ethylvanillin (3-ethoxy-4-hydroxybenzaldehyde) (CAS RN 121-32-4)1.1.-31.12.1950 tonnes0 %09.2683ex2914199050Calcium acetylacetonate (CAS RN 19372-44-2) for use in the manufacture of stabilisator systems in tablet form1.1.-31.12.200 tonnes0 %09.2852ex2914290060Cyclopropyl methyl ketone (CAS RN 765-43-5)1.1.-31.12.300 tonnes0 %09.2638ex2915210010Acetic acid (CAS RN 64-19-7) of a purity by weight of 99 % or more1.1.-31.12.1000000 tonnes0 % 09.297229152400Acetic anhydride (CAS RN 108-24-7)1.1.-31.12.50000 tonnes0 %09.267929153200Vinyl acetate (CAS RN 108-05-4)1.1.-31.12.400000 tonnes0 %09.2728ex2915907085Ethyl trifluoroacetate (CAS RN 383-63-1)1.1.-31.12.400 tonnes0 %09.2665ex2916199530Potassium (E,E)-hexa-2,4-dienoate (CAS RN 24634-61-5)1.1.-31.12.8250 tonnes0 %09.2684ex29163990282,5-dimethylphenylacetyl chloride (CAS RN 55312-97-5)1.1.-31.12.400 tonnes0 %09.2599ex2917110040Diethyl oxalate (CAS RN 95-92-1)1.1.-31.12.500 tonnes0 %09.2769ex2917139010Dimethyl sebacate (CAS RN 106-79-6)1.1.-31.12.1000 tonnes0 %09.2634ex2917198040Dodecanedioic acid (CAS RN 693-23-2), of a purity by weight of more than 98,5 %1.1.-31.12.4600 tonnes0 %09.2808ex2918220010O-acetylsalicylic acid (CAS RN 50-78-2)1.1.-31.12.120 tonnes0 %09.2646ex2918290075 Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate (CAS RN 2082-79-3) with: a sieve passing fraction at a mesh width of 500 μm of more than 99 % by weight, and a melting point of 49 °C or more, but not more than 54 °C, for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates)

1.1.-31.12.380 tonnes0 %09.2647ex2918290080 Pentaerythritol tetrakis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS RN 6683-19-8) with: a sieve passing fraction at a mesh width of 250 μm of more than 75 % by weight and at a mesh width of 500 μm of more than 99 % by weight, and a melting point of 110 °C or more, but not more than 125 °C, for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates) 1.1.-31.12.140 tonnes0 %09.2975ex2918300010Benzophenone-3,3',4,4'-tetracarboxylic dianhydride (CAS RN 2421‐28‐5)1.1.-31.12.1000 tonnes0 %09.2688ex2920290070Tris (2,4-di-tert-butylphenyl)phosphite (CAS RN 31570-04-4)1.1.-31.12.6000 tonnes0 %09.2648ex2920901070Dimethyl Sulphate (CAS RN 77-78-1)1.1.-30.6.9000 tonnes0 %09.2598ex2921199975Octadecylamine (CAS RN 124-30-1)1.1.-31.12.400 tonnes0 % 09.2649ex2921290060Bis(2-dimethylaminoethyl)(methyl)amine (CAS RN 3030-47-5)1.1.-31.12.1700 tonnes0 %09.2682ex2921410010Aniline (CAS RN 62-53-3) with a purity by weight of 99 % or more1.1.-31.12.150000 tonnes0 %09.2617ex29214200894-Fluoro-N-(1-methylethyl)benzeneamine (CAS RN 70441-63-3)1.1.-31.12.500 tonnes0 %09.2590ex29214300752-Methylaniline (CAS RN 95-53-4)1.1.-30.6.1000 kilograms0 %09.2602ex2921511910o-phenylenediamine (CAS RN 95-54-5)1.1.-31.12.1800 tonnes0 %09.2730ex29215990804,4'-Methanediyldianiline (CAS RN 101-77-9) in form of granules, for use in the manufacture of prepolymers1.1.-30.6.100 tonnes0 %09.2591ex2922410010L-Lysine hydrochloride (CAS RN 657-27-2)1.1.-31.12.445000 tonnes0 %09.2592ex2922500025L-Threonine (CAS RN 72-19-5)1.1.-31.12.166000 tonnes0 %09.2854ex29241900853-iodoprop-2-yn-1-yl butylcarbamate (CAS RN 55406-53-6)1.1.-31.12.250 tonnes0 %09.2874ex2924297087Paracetamol (INN) (CAS RN 103-90-2)1.1.-31.12.20000 tonnes0 %09.2742ex2926100010Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of chapter 55 and heading 68151.1.-31.12.60000 tonnes0 %09.2856ex29269070842-Nitro-4(trifluoromethyl)benzonitrile (CAS RN 778-94-9)1.1.-31.12.900 tonnes0 %09.2708ex2928009015Monomethylhydrazine (CAS 60-34-4) in the form of an aqueous solution with a content by weight of monomethylhydrazine of 40 (± 5) %1.1.-31.12.900 tonnes0 %09.2685ex2929900030Nitroguanidine (CAS RN 556-88-7)1.1.-31.12.6500 tonnes0 %09.2597ex2930909894Bis[3-(triethoxysilyl)propyl]disulphide (CAS RN 56706-10-6)1.1.-31.12.6000 tonnes0 %09.2596ex29309098962-Chloro-4-(methylsulphonyl)-3-((2,2,2-trifluoroethoxy)methyl) benzoic acid (CAS RN 120100-77-8)1.1.-31.12.300 tonnes0 %09.2842293212002-Furaldehyde (furfuraldehyde)1.1.-31.12.10000 tonnes0 %09.2955ex2932190060Flurtamone (ISO) (CAS RN 96525-23-4)1.1.-31.12.300 tonnes0 %09.2696ex2932209025Decan-5-olide (CAS RN 705-86-2)1.1.-31.12.6000 kilograms0 %09.2697ex2932209030Dodecan-5-olide (CAS RN 713-95-1)1.1.-31.12.6000 kilograms0 %09.2812ex2932209077Hexan-6-olide (CAS RN 502-44-3)1.1.-31.12.4000 tonnes0 %09.285829329300Piperonal (CAS RN 120-57-0)1.1.-31.12.220 tonnes0 % 09.2673ex29333999432,2,6,6-Tetramethylpiperidin-4-ol (CAS RN 2403-88-5)1.1.-31.12.1000 tonnes0 %09.2674ex2933399944Chlorpyrifos (ISO) (CAS RN 2921-88-2)1.1.-31.12.9000 tonnes0 %09.2880ex2933599539Ibrutinib (INN) (CAS RN 936563-96-1)1.1.-31.12.5 tonnes0 %09.2860ex29336980301,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine (CAS RN 15875-13-5)1.1.-31.12.600 tonnes0 %09.2595ex29339980491,4,7,10-Tetraazacyclododecane (CAS RN 294-90-6)1.1.-31.12.40 tonnes0 %09.2658ex29339980735-(Acetoacetylamino)benzimidazolone (CAS RN 26576-46-5)1.1.-31.12.400 tonnes0 %09.2593ex29349990675-Chlorothiophene-2-carboxylic acid (CAS RN 24065-33-6)1.1.-31.12.45000 kilograms0 %09.2675ex29359090794-[[(2-Methoxybenzoyl)amino]sulfonyl]benzoyl chloride (CAS RN 816431-72-8)1.1.-31.12.1000 tonnes0 %09.2710ex29359090912,4,4-trimethylpentan-2-aminium (3R,5S,6E)-7-{2-[(ethylsulfonyl)amino]-4-(4-fluorophenyl)-6-(propan-2-yl)pyrimidin-5-yl}-3,5-dihydroxyhept-6-enoate (CAS RN 917805-85-7)1.1.-31.12.5000 kilograms0 %09.2945ex2940000020D-Xylose (CAS RN 58-86-6)1.1.-31.12.400 tonnes0 %09.2686ex3204110075Colourant C.I. Disperse Yellow 54 (CAS RN 7576-65-0) and preparations based thereon with a colourant C.I. Disperse Yellow 54 content of 99 % or more by weight1.1.-31.12.250 tonnes0 %09.2676ex3204170014Preparations based on Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) with a content thereof of 60 % or more but less than 85 % by weight1.1.-31.12.50 tonnes0 %09.2698ex3204170030Colourant C.I. Pigment Red 4 (CAS RN 2814-77-9) and preparations based thereon with a colourant C.I. Pigment Red 4 content of 60 % or more by weight1.1.-31.12.150 tonnes0 %09.2659ex3802900019Soda flux calcinated diatomaceous earth1.1.-31.12.35000 tonnes0 %09.2908ex3804000010Sodium lignosulphonate (CAS RN 8061-51-6)1.1.-31.12.40000 tonnes0 %09.288938051090Sulphate turpentine1.1.-31.12.25000 tonnes0 %09.2935ex3806100010Rosin and resin acids obtained from fresh oleoresins1.1.-31.12.280000 tonnes0 %09.2832ex3808929040Preparation containing 38 % or more but not more than 50 % by weight of pyrithione zinc (INN) (CAS RN 13463-41-7) in an aqueous dispersion1.1.-31.12.500 tonnes0 %

09.2876ex3811290055 Additives consisting of reaction products of diphenylamine and branched nonenes containing by weight: 28 % or more, but not more than 55 % of 4‐monononyldiphenylamine, 45 % or more but not more than 65 % of 4,4'‐dinonyldiphenylamine, and not more than 5 % of 2,4-dinonyldiphenylamine and 2,4'‐dinonyldiphenylamine, used for the manufacture of lubricating oils 1.1.-31.12.900 tonnes0 %09.2814ex3815909076Catalyst consisting of titanium dioxide and tungsten trioxide1.1.-31.12.3000 tonnes0 %09.2820ex3824790010 Mixtures containing by weight: 60 % or more but not more than 90 % of 2-chloropropene (CAS RN 557-98-2), 8 % or more but not more than 14 % of (Z)-1-chloropropene (CAS RN 16136-84-8), 5 % or more but not more than 23 % of 2-chloropropane (CAS RN 75-29-6), not more than 6 % of 3-chloropropene (CAS RN 107-05-1), and not more than 1 % of ethyl chloride (CAS RN 75-00-3) 1.1.-31.12.6000 tonnes0 %09.2644ex3824999277 Preparation containing by weight: 55 % or more but not more than 78 % of dimethyl glutarate (CAS RN 1119-40-0), 10 % or more but not more than 30 % of dimethyl adipate (CAS RN 627-93-0), and not more than 35 % of dimethyl succinate (CAS RN 106‐65‐0) 1.1.-31.12.10000 tonnes0 %09.2681ex3824999285Mixture of bis [3-(triethoxysilyl)propyl]sulphides (CAS RN 211519‐85‐6)1.1.-31.12.9000 tonnes0 %09.2650ex3824999287Acetophenone (CAS RN 98-86-2), with a purity by weight of 60 % or more but not more than 90 %1.1.-31.12.2000 tonnes0 %09.2888ex3824999289 Mixture of tertiary alkyldimethyl amines containing by weight: 60 % or more but not more than 80 % of dodecyldimethylamine (CAS RN 112-18-5), and 20 % or more but not more than 30 % of dimethyl(tetradecyl)amine (CAS RN 112-75-4) 1.1.-31.12.25000 tonnes0 %09.2829ex3824999343 Solid extract of the residual, insoluble in aliphatic solvents, obtained during the extraction of rosin from wood, having the following characteristics: a resin acid content not exceeding 30 % by weight, an acid number not exceeding 110, and a melting point of 100° C or more 1.1.-31.12.1600 tonnes0 % 09.2907ex3824999367 Mixture of phytosterols, in the form of powder, containing by weight: 75 % or more of sterols, not more than 25 % of stanols, for use in the manufacture of stanols/sterols or stanol/sterol esters 1.1.-31.12.2500 tonnes0 %09.263939053000Poly(vinyl alcohol), whether or not containing unhydrolysed acetate groups1.1.-31.12.15000 tonnes0 %09.2671ex3905999081 Poly(vinyl butyral)(CAS RN 63148-65-2): containing by weight 17,5 % or more, but not more than 20 % of hydroxyl groups, and with a median particle size (D50) of more than 0,6 mm 1.1.-31.12.12500 tonnes0 %09.2846ex3907400025Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of not less than 98,5 % by weight, in the form of pellets or granules, with a luminous transmittance of not less than 88,5 %, measured using a test sample with a thickness of 4 mm at a wavelength of λ = 400 nm (according to ISO 13468-2)1.1.-31.12.2000 tonnes0 %09.2723ex3911901910Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-4,4'-biphenylene)1.1.-31.12.5000 tonnes0 %09.2816ex3912110020Cellulose acetate flakes1.1.-31.12.75000 tonnes0 %09.2864ex3913100010Sodium alginate, extracted from brown seaweed (CAS RN 9005-38-3)1.1.-31.12.10000 tonnes0 %09.2641ex3913900087

Sodium hyaluronate, non sterile, with: a weight average molecular weight (Mw) of not more than 900000, an endotoxin level of not more than 0,008 Endotoxin units (EU)/mg, an ethanol content of not more than 1 % by weight, an isopropanol content of not more than 0,5 % by weight 1.1.-31.12.200 kilograms0 %09.2661ex3920510050 Sheets of polymethylmethacrylate conforming to standards: EN 4364 (MIL-P-5425E) and DTD5592A, or EN 4365 (MIL-P-8184) and DTD5592A 1.1.-31.12.100 tonnes0 %09.2645ex3921140020Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) x 100 cm (± 10 cm) x 40 cm (± 5 cm)1.1.-31.12.1700 tonnes0 %09.2848ex5505101010Waste of synthetic fibres (including noils, yarn waste, and garnetted stock) of nylon or other polyamides (PA6 and PA66)1.1.-31.12.10000 tonnes0 % 09.2721ex5906999020 Woven and laminated rubberised textile fabric with the following characteristics: with three layers, one outer layer consists of acrylic fabric, the other outer layer consists of polyester fabric, the middle layer consists of chlorobutyl rubber, the middle layer has a weight of 452 g/m2 or more but not more than 569 g/m2, the textile fabric has a total weight of 952 g/m2 or more but not more than 1159 g/m2, and the textile fabric has a total thickness of 0,8 mm or more but not more than 4 mm, used for the manufacture of the retractable roof of motor vehicles 1.1.-31.12.375000 square meters0 %09.2594ex6909190055 Ceramic-carbon absorption cartridges with the following characteristics: extruded fired ceramic bound multicellular cylindrical structure 10 or more % by weight but not more than 30 % by weight of activated carbon, 70 or more % by weight but not more than 90 % by weight of ceramic binder, with a diameter of 29 mm or more but not more than 41 mm, a length of not more than 150 mm, fired at temperature of 800 °C or more, and for vapours adsorption, of a kind used for assembly in fuel vapours absorbers in fuel systems of motor vehicles 1.1.-31.12.1000000 pieces0 %09.2866 ex70191200 ex70191200 06 26 S glass stratifils (rovings): composed of continuous glass filaments of 9 μm (±0,5 μm), measuring 200 tex or more but not more than 680 tex, not containing any calcium oxide, and with a breaking strength of more than 3550 MPa determined by ASTM D2343-09, for use in the manufacture of aeronautics 1.1.-31.12.1000 tonnes0 %09.2628ex7019520010Glass web woven from glass fibre coated in plastic, of a weight of 120 g/m2(± 10 g/m2), of a type used in rolling insect screens with fixed frames1.1.-31.12.3000000 square meters0 %09.2799ex7202499010Ferro-chromium containing 1,5 % or more but not more than 4 % by weight of carbon and not more than 70 % of chromium1.1.-31.12.50000 tonnes0 % 09.2652 ex74091100 ex74101100 30 40 Refined copper foil and strips, electrolytically coated, with a thickness of 0,015 mm or more1.1.-31.12.1020 tonnes0 %09.2734ex7409190020 Plates or sheets consisting of:

a layer of a silicon nitride ceramic with a thickness of 0,32 mm (±0,1 mm) or more but not more than 1,0 mm (±0,1 mm), covered on both sides with a foil of refined copper with a thickness of 0,8 mm (±0,1 mm), and on one side partially covered with a coating of silver 1.1.-31.12.7000000 pieces0 %09.2662ex7410210055 Plates: consisting of at least one layer of fibreglass fabric impregnated with epoxide resin, covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, with a comparative tracking index (CTI) of 600 or more 1.1.-31.12.80000 square meters0 %09.2834ex7604291020Aluminium alloy rods with a diameter of 200 mm or more, but not exceeding 300 mm1.1.-31.12.2000 tonnes0 %09.2835ex7604291030Aluminium alloy rods with a diameter of 300,1 mm or more, but not more than 533,4 mm1.1.-31.12.1000 tonnes0 %09.2736ex7607119083 Aluminium and magnesium alloy strip or foil: of an alloy conforming to standards 5182-H19 or 5052-H19, in rolls with an outside diameter of minimum 1250 mm but not more than 1350 mm, of a thickness (tolerance -0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm, of a width ( tolerance ±0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, having a camber tolerance of not more than 0,4 mm/750 mm, of a flatness measurement: I-unit ±4, having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, and of an elongation A50 of more than (5182-H19) 3 % or (5052‐H19) 2,5 %, for use in the manufacture of slats for blinds 1.1.-31.12.600 tonnes0 % 09.272281041100Unwrought magnesium, containing at least 99,8 % by weight of magnesium1.1.-31.12.120000 tonnes0 %09.2840ex8104300020 Magnesium powder: of purity by weight of 98 % or more, but not more than 99,5 %, and with a particle size of 0,2 mm or more but not more than 0,8 mm 1.1.-31.12.2000 tonnes0 %09.2629ex8302490091Aluminium telescopic handle for use in the manufacture of luggage1.1.-31.12.1500000 pieces0 %09.2720ex8413910050 Pump head for two cylinder high pressure pump made of forged steel, with: milled threaded fittings with a diameter of 10 mm or more but not more than 36,8 mm, and drilled fuel channels with a diameter of 3,5 mm or more but not more than 10 mm, of a kind used in diesel injection systems 1.1.-31.12.65000 pieces0 %09.2738ex8482990030 Brass cages with the following characteristics: continuously or centrifugally cast, turned, containing by weight 35 % or more, but not more than 38 % of zinc, containing by weight 0,75 % or more, but not more than 1,25 % of lead, containing by weight 1,0 % or more, but not more than 1,4 % of aluminium, and with a tensile strength of 415 Pa or more, of a kind used for the manufacture of ball bearings 1.1.-31.12.50000 pieces0 %09.2763 ex85014020 ex85014080 40 30 Electric AC commutator motor, single-phase, with an output of 250 W or more, an input power of 700 W or more but not more than 2700 W, an external diameter of more than 120 mm (±0,2 mm) but not more than 135 mm (±0,2 mm), a rated speed of more than 30000 rpm but not more than 50000 rpm, equipped with air-inducting ventilator, for use in the manufacture of vacuum cleaners1.1.-31.12.2000000 pieces0 %09.2588ex8529909256

LCD display with: a touch panel, at least one printed circuit board for simple slave device pixel addressing (Timing Controller function) and touch control, with EEPROM (Electrically Erasable Programmable Read‐Only Memory) for display settings, a diagonal screen measurement of 15 cm or more but not more than 21 cm, a backlight, a LVDS (Low Voltage Differential Signalling) and a power supply connector, a viewing angle of 70 degree, or more, and a luminance of 715 cd/m2, or more, for use in the manufacture of motor vehicles of Chapter 87 1.1.-30.6.450000 pieces0 % 09.2672 ex85299092 ex94054039 75 70 Printed circuit board with LED diodes: whether or not equipped with prisms/lens, and whether or not fitted with connector(s), for the manufacture of backlight units for goods of heading 8528 1.1.-31.12.115000000 pieces0 %09.2003ex8543709063Voltage controlled frequency generator, consisting of active and passive elements mounted on a printed circuit, contained in a housing with dimensions of not more than 30 mm x 30 mm1.1.-31.12.1400000 pieces0 %09.2910ex8708999775Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 871.1.-31.12.200000 pieces0 %09.2694ex8714109030Axle clamps, housings, fork bridges and clamping pieces, of aluminium alloy of a kind used for motor bikes1.1.-31.12.1000000 pieces0 %09.2668 ex87149110 ex87149110 ex87149110 21 31 75 Bicycle frame, constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including electric bicycles)1.1.-31.12.350000 pieces0 %09.2589 ex87149110 ex87149110 ex87149110 23 33 70 Frame, constructed from aluminium or aluminium and carbon fibres, for the use in the manufacture of bicycles (including electric bicycles)1.1.-31.12.8000000 pieces0 %09.2631ex9001900080Unmounted glass lenses, prisms and cemented elements for use in the manufacture or repair of goods of CN codes 9002, 9005, 901310 and 90151.1.-31.12.5000000 pieces0 %