Commission Implementing Regulation (EU) 2019/2222 of 12 December 2019 amending Regulation (EC) No 684/2009 implementing Council Directive 2008/118/EC as regards the data to be submitted under the computerised procedures for the movement of excise goods under suspension of excise duty

Commission Implementing Regulation (EU) 2019/2222 of 12 December 2019 amending Regulation (EC) No 684/2009 implementing Council Directive 2008/118/EC as regards the data to be submitted under the computerised procedures for the movement of excise goods under suspension of excise duty THE EUROPEAN COMMISSION, Having regard to the Treaty on the Functioning of the European Union, Having regard to Council Directive 2008/118/EC of 16 December 2008 concerning the general arrangements for excise duty and repealing Directive 92/12/EEC OJ L 9, 14.1.2009, p. 12. , and in particular Article 29(1) thereof, Whereas: (1) Annex I to Commission Regulation (EC) No 684/2009 Commission Regulation (EC) No 684/2009 of 24 July 2009 implementing Council Directive 2008/118/EC as regards the computerised procedures for the movement of excise goods under suspension of excise duty (OJ L 197, 29.7.2009, p. 24). lays down the structure and content of electronic messages used for the purpose of movements of excise goods under suspension of excise duty, as well as the codes required for the completion of certain data items in those messages. (2) The computerised system established by Decision No 1152/2003/EC of the European Parliament and of the Council Decision No 1152/2003/EC of the European Parliament and of the Council of 16 June 2003 on computerising the movement and surveillance of excisable products (OJ L 162, 1.7.2003, p. 5). for the purpose of movement of excise goods under suspension of excise duty does not have a standard way of referring to any electronic or paper attachments. This means that finding the link between an electronic administrative document and an attachment is not clear and has to be done manually, which is burdensome for tax authorities. In order to make the system more efficient, there is a need to provide for a common and automatic way of linking an electronic administrative document with attached documents, the content of electronic messages should be updated. In particular, the DOCUMENT Certificate data group should be updated by including only one additional set of information concerning Document Type and Document Reference data elements. (3) During the submission or split of an electronic administrative document, where goods from two or more body records are included in the same group of packages, the first body record should mention the actual number of packages and subsequent body records should set the number of packages to zero. In order to avoid rejection of a message due to the missing number of packages in those body records, if there is more than one body record in the electronic administrative document, the value of the Number of packages data item should be greater than zero in at least one of the data item’s occurrences. (4) Regulation (EC) No 684/2009 should therefore be amended accordingly. (5) In order to align the application date of this Regulation with the application date of a new version of the computerised system established by Decision No 1152/2003/EC, this Regulation should apply from 13 February 2020.

(6) The measures provided for in this Regulation are in accordance with the opinion of the Committee on Excise Duty, HAS ADOPTED THIS REGULATION:

Article 1

Annex I to Regulation (EC) No 684/2009 is amended in accordance with the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union. It shall apply from 13 February 2020. This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 12 December 2019. For the Commission The President Ursula Von Der Leyen

Annex

ANNEX I In Annex I to Regulation (EC) No 684/2009, tables 1 and 5 are replaced by the following: Table 1 (referred to in Article 3(1) and Article 8(1)) Draft electronic administrative document and electronic administrative document Commission Regulation (EC) No 31/96 of 10 January 1996 on the excise duty exemption certificate (OJ L 8, 11.1.1996, p. 11). Commission Regulation (EC) No 436/2009 of 26 May 2009 laying down detailed rules for the application of Council Regulation (EC) No 479/2008 as regards the vineyard register, compulsory declarations and the gathering of information to monitor the wine market, the documents accompanying consignments of wine products and the wine sector registers to be kept (OJ L 128, 27.5.2009, p. 15). Regulation (EU) No 1308/2013 of the European Parliament and of the Council of 17 December 2013 establishing a common organisation of the markets in agricultural products and repealing Council Regulations (EEC) No 922/72, (EEC) No 234/79, (EC) No 1037/2001 and (EC) No 1234/2007 (OJ L 347, 20.12.2013, p. 671). Commission Regulation (EC) No 607/2009 of 14 July 2009 laying down certain detailed rules for the implementation of Council Regulation (EC) No 479/2008 as regards protected designations of origin and geographical indications, traditional terms, labelling and presentation of certain wine sector products (OJ L 193, 24.7.2009, p. 60). Regulation (EC) No 110/2008 of the European Parliament and of the Council of 15 January 2008 on the definition, description, presentation, labelling and the protection of geographical indications of spirit drinks and repealing Council Regulation (EEC) No 1576/89 (OJ L 39, 13.2.2008, p. 16). Council Directive 92/83/EEC of 19 October 1992 on the harmonization of the structures of excise duties on alcohol and alcoholic beverages (OJ L 316, 31.10.1992, p. 21). ABCDEFGATTRIBUTERaMessage TypeR The possible values are: 1 = Standard submission (to be used in all cases except where submission concerns export with local clearance), 2 = Submission for export with local clearance. The message type must not occur in the e-AD to which an ARC has been assigned, nor in the paper document referred to in Article 8(1) of this Regulation. n1bDeferred Submission FlagDR for submission of an e-AD for a movement that has begun under cover of the paper document referred to in Article 8(1)

Possible values: 0 = false, 1 = true. The value is false by default. This data element must not occur in the e-AD to which an ARC has been assigned, nor in the paper document referred to in Article 8(1). n11EXCISE MOVEMENT E-ADRaDestination Type CodeR Provide the destination of the movement using one of the following values: 1 = Tax warehouse (point (i) of Article 17(1)(a) of Directive 2008/118/EC), 2 = Registered consignee (point (ii) of Article 17(1)(a) of Directive 2008/118/EC), 3 = Temporary registered consignee (point (ii) of Article 17(1)(a) and Article 19(3) of Directive 2008/118/EC), 4 = Direct delivery (Article 17(2) of Directive 2008/118/EC), 5 = Exempted consignee (point (iv) of Article 17(1)(a) of Directive 2008/118/EC), 6 = Export (point (iii) of Article 17(1)(a) of Directive 2008/118/EC), 8 = Unknown destination (consignee unknown; Article 22 of Directive 2008/118/EC). n1 bJourney TimeRProvide the normal period of time necessary for the journey taking into account the means of transport and the distance involved, expressed in hours (H) or days (D) followed by a two-digit number (examples: H12, or D04). Indication for H should be less or equal to 24. Indication for D should be less or equal to the possible values of Maximum Journey Time per Transport Mode Code presented in Code list 13 of Annex II.an3cTransport ArrangementR Identify the person responsible for arranging the first transport using one of the following values: 1 = Consignor, 2 = Consignee, 3 = Owner of goods, 4 = Other. n1dARCRTo be provided by the competent authorities of the Member State of dispatch upon validation of the draft e-ADSee Code list 2 of Annex II.an21eDate and Time of Validation of e-ADRTo be provided by the competent authorities of the Member State of dispatch upon validation of the draft e-ADThe addressed time is local time.dateTime fSequence NumberRTo be provided by the competent authorities of the Member State of dispatch upon validation of the draft e-AD and for each change of destinationSet to 1 at initial validation and then incremented by 1 in each e-AD generated by the competent authorities of the Member State of dispatch upon each change of destination.n..2gDate and Time of Validation of UpdateCThe date and time of validation of the change of destination message in Table 3, to be provided by the competent authorities of the Member State of dispatch in case of change of destinationThe addressed time is local time.dateTime2TRADER CONSIGNORRaTrader Excise NumberRProvide a valid SEED registration number of the authorised warehousekeeper or registered consignor.an13bTrader NameRan..182cStreet NameRan..65dStreet NumberOan..11ePostcodeRan..10fCityRan..50gNAD_LNGRProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a23TRADER PLACE OF DISPATCHCR if Origin Type Code in box 9d is 1aTax Warehouse ReferenceRProvide a valid SEED registration number of the tax warehouse of dispatch.an13bTrader NameOan..182cStreet NameOan..65dStreet NumberOan..11

ePostcodeOan..10fCityOan..50gNAD_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a24OFFICE OF DISPATCH — IMPORTCR if Origin Type Code in box 9d is 2aOffice Reference NumberRProvide the code of the customs office responsible for release for free circulation. See Code list 5 of Annex II.an85TRADER CONSIGNEEC R, except for message type 2 — Submission for export with local clearance or for Destination Type Code 8 (See Destination Type Codes in box 1a) aTrader IdentificationC R for Destination Type Code 1, 2, 3 and 4 O for Destination Type Code 6 This data element does not apply for Destination Type Code 5 (See Destination Type Codes in box 1a) For Destination Type Code: 1, 2, 3 and 4: provide a valid SEED registration number of the authorised warehousekeeper or registered consignee, 6: provide the VAT identification number of the person representing the consignor at the office of export. an..16bTrader NameRan..182cStreet NameRan..65dStreet NumberOan..11ePostcodeRan..10fCityRan..50gNAD_LNGRProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2hEORI NumberC O for Destination Type Code 6 This data element does not apply for Destination Type Code 1, 2,3, 4, 5 and 8 (See Destination Type Codes in box 1a) Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(5) of Directive 2008/118/EC.an..17 6TRADER COMPLEMENT CONSIGNEEC R for Destination Type Code 5 (See Destination Type Codes in box 1a) aMember State CodeRProvide the Member State of destination using the Member State Code in Code list 3 of Annex II.a2bSerial Number of Certificate of ExemptionDR if a serial number is mentioned on the excise duty exemption certificate established in Commission Regulation (EC) No 31/96an..2557TRADER PLACE OF DELIVERYC R for Destination Type Code 1 and 4 O for Destination Type Code 2, 3 and 5 (See Destination Type Codes in box 1a) Provide the actual place of delivery of the excise goods. For Destination Type Code 2, the data group: is O for the e-AD, since the Member State of dispatch can fill in this box with the address of the registered consignee defined in SEED, does not apply for the draft e-AD. —aTrader IdentificationC R for Destination Type Code 1 O for Destination Type Code 2, 3, and 5 (See Destination Type Code in box 1a) For Destination Type Code: 1: provide a valid SEED registration number of the tax warehouse of destination, 2, 3 and 5: provide the VAT identification number or any other identifier. an..16bTrader NameC R for Destination Type Code 1, 2, 3 and 5 O for Destination Type Code 4 (See Destination Type Codes in box 1a) an..182cStreet NameC For box 7c, 7e and 7f: R for Destination Type Code 2, 3, 4 and 5 O for Destination Type Code 1 (See Destination Type Codes in box 1a) an..65dStreet NumberOan..11ePostcodeCan..10fCityCan..50gNAD_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2

8OFFICE PLACE OF DELIVERY — CUSTOMSC R in case of export (Destination Type Code 6) (See Destination Type Codes in box 1a) aOffice Reference NumberRProvide the code of the office of export at which the export declaration will be lodged. See Code list 5 of Annex II.an89E-ADRaLocal Reference NumberRA unique serial number assigned to the e-AD by the consignor which identifies the consignment in the records of the consignor.an..22bInvoice NumberRProvide the number of the invoice relating to the goods. If the invoice has not yet been prepared, the number of the delivery note or any other transport document should be given.an..35cInvoice DateOThe Member State of dispatch may decide to make this data RThe date of the document shown in box 9b.DatedOrigin Type CodeR The possible values for the origin of the movement are: 1 = Origin — Tax warehouse (in the situations referred to in Article 17(1)(a) of Directive 2008/118/EC), 2 = Origin — Import (in the situation referred to in Article 17(1)(b) of Directive 2008/118/EC). n1eDate of DispatchRThe date at which the movement begins in accordance with Article 20(1) of Directive 2008/118/EC. This date cannot be later than 7 days after the date of submission of the draft e-AD. The date of dispatch can be a date in the past in the case referred to of Article 26 of Directive 2008/118/EC.DatefTime of DispatchOThe Member State of dispatch may decide to make this data RThe time at which the movement begins in accordance with Article 20(1) of Directive 2008/118/EC. The addressed time is local time.Time gUpstream ARCDTo be provided by the competent authorities of the Member State of dispatch upon validation of new e-ADs following the validation of the message Splitting operation (Table 5)The ARC to be provided is the ARC of the replaced e-AD.an219.1IMPORT SADCR if Origin Type Code in box 9d is 2 (import)9XaImport SAD NumberRThe SAD Number shall be provided either by the consignor at the time of submission of the draft e-AD or by the competent authorities of the Member State of dispatch upon validation of the draft e-ADProvide the number(s) of the single administrative document(s) used for the release for free circulation of the goods concerned.an..2110OFFICE COMPETENT AUTHORITY AT DISPATCHRaOffice Reference NumberRProvide the code of the office of the competent authorities in the Member State of dispatch responsible for excise control at the place of dispatch. See Code list 5 of Annex II.an811MOVEMENT GUARANTEERaGuarantor Type CodeRIdentify the person(s) responsible for providing the guarantee using guarantor type code in Code list 6 of Annex II.n..412TRADER GUARANTORC R if one of the following Guarantor Type Codes applies: 2, 3, 12, 13, 23, 24, 34, 123, 124, 134, 234 or 1234 (See Guarantor Type Code in Code list 6 of Annex II) Identify the transporter and/or the owner of the goods if they provide the guarantee.2XaTrader Excise NumberOThe Member State of dispatch may decide to make this data RProvide a valid SEED registration number or VAT identification number of the transporter or owner of the excise goods.an13bVAT NumberOan..14

cTrader NameC For 12c, d, f and g: O if Trader Excise Number is provided, otherwise R an..182dStreet NameCan..65eStreet NumberOan..11fPostcodeCan..10gCityCan..50hNAD_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a213TRANSPORTRaTransport Mode CodeR Provide the mode of transport at the time of the start of the movement, using the codes in Code list 7 of Annex II. If Guarantor Type Code is No guarantee is provided according to Article 18(4)(b) of 2008/118/EC the Transport Mode Code must be Sea Transport or Fixed transport installations. n..2bComplementary InformationC R if Transport Mode Code is Other Otherwise O Provide a textual description of the mode of transport.an..350cComplementary Information_LNGCR if corresponding text field is usedProvide language code, see Code list 1 of Annex II to define the language used in this data group.a214TRADER TRANSPORT ARRANGERCR to identify the person responsible for arranging the first transport if value in box 1c is 3 or 4aVAT NumberOThe Member State of dispatch may decide to make this data Ran..14bTrader NameRan..182cStreet NameRan..65 dStreet NumberOan..11ePostcodeRan..10fCityRan..50gNAD_LNGRProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a215TRADER FIRST TRANSPORTEROThe Member State of dispatch may decide to make this data RIdentify the person carrying out the first transport.aVAT NumberOan..14bTrader NameRan..182cStreet NameRan..65dStreet NumberOan..11ePostcodeRan..10fCityRan..50gNAD_LNGRProvide language code, see Code list 1 of Annex II to define the language used in this data group.a216TRANSPORT DETAILSR99XaTransport Unit CodeR Provide Transport Unit Code(s) related to the transport mode indicated in box 13a. See Code list 8 of Annex II. n..2bIdentity of Transport UnitsC R if the Transport Unit Code is other than 5 (See box 16a) Enter the registration number of the transport unit(s) when the Transport Unit Code is other than 5.an..35 cIdentity of Commercial SealDR if commercial seals are usedProvide the identification of the commercial seals, if used to seal the transport unit.an..35dSeal InformationOProvide any additional information concerning those commercial seals (e.g. type of seals used).an..350eSeal Information_LNGCR if corresponding text field is usedProvide language code presented in Code list 1 of Annex II to define the language used in this data group.a2fComplementary InformationOProvide any additional information concerning the transport, e.g. identity of any subsequent transporter, information concerning subsequent transport units.an..350gComplementary Information_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a217E-AD BODYRA separate data group must be used for each product composing the consignment.999xaBody Record Unique ReferenceRProvide a unique sequential number, starting with 1.n..3bExcise Product CodeR

Provide the applicable Excise Product Code, see Code list 11 of Annex II. If Guarantor Type Code is No guarantee is provided according to Article 18(4)(b) of 2008/118/EC, the Excise Product Code must be that of an energy product. an4cCN CodeR Provide the CN Code applicable at the date of dispatch. The value of this data element must be greater than zero. n8dQuantityR Provide quantity (expressed in the unit of measurement associated with the product code — See Code lists 11 and 12 of Annex II). For a movement to a registered consignee referred to in Article 19(3) of Directive 2008/118/EC, the quantity shall not exceed the quantity which he is authorised to receive. For a movement to an exempted organisation referred to in Article 12 of Directive 2008/118/EC, the quantity shall not exceed the quantity registered in the excise duty exemption certificate. The value of this data element must be greater than zero. n..15,3 eGross WeightR Provide the gross weight of the consignment (the excise goods with packaging). The value of this data element must be greater than zero. The Gross Weight must be equal to or higher than Net Weight. n..15,2fNet WeightR Provide the weight of the excise goods without packaging (for alcohol and alcoholic beverages, energy products and for all tobacco products except cigarettes). The value of this data element must be greater than zero. The Gross Weight must be equal to or higher than Net Weight. n..15,2gAlcoholic strength by Volume in PercentageCR if applicable for the excise good in question Provide the alcoholic strength (percentage by volume at 20 °C) if applicable in accordance with Code list 11 of Annex II. The value of this data element must be greater than zero. The value of this data item must be greater than 0,5 and less than or equal to 100. n..5,2hDegree PlatoDR if the Member State of dispatch and/or the Member State of destination tax beer on the basis of degree Plato For beer, provide the Degree Plato if the Member State of dispatch and/or the Member State of destination tax beer on that basis. See Code list 11 of Annex II. The value of this data element must be greater than zero. n..5,2iFiscal MarkOProvide any additional information concerning the fiscal marks required by the Member State of destination.an..350jFiscal Mark_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2 kFiscal Mark Used flagDR if fiscal marks are usedProvide 1 if the goods carry or contain fiscal marks or 0 if the goods do not carry or contain fiscal marks.n1lDesignation of OriginO This box can be used to give certification:

1. in the case of certain wines, relating to the protected designation of origin or geographical indication (PDO or PGI) and the vintage year or the wine-grape variety(ies), in accordance with Articles 24 and 31 of Commission Regulation (EC) No 436/2009, Certification shall be given in the following terms: It is hereby certified that the product described has been produced in accordance with rules provided for in Regulation (EU) No 1308/2013 of the European Parliament and of the Counciland its delegated and implementing acts. If the product is a PDO or PGI the terms are followed by the name(s) of the PDO or PGI and its register number(s) as provided for in Article 18 of Commission Regulation (EC) No 607/2009.

1. in the case of certain spirit drinks, for which the marketing is relating to the spirit category or categories, geographical indication (GI) or age of the product, in accordance with the relevant Union legislation on spirit drinks (in particular Articles 4, 12(3) and 15 and Annex II of Regulation (EC) No 110/2008 of the European Parliament and of the Council) certification shall be given in the following terms: It is hereby certified that the product(s) described has been marketed and labelled in compliance with the requirements of Articles 4, 12(3) and 15 and Annex II of Regulation (EC) No 110/2008 and its delegated and implementing acts.
2. for beer brewed by an independent small brewery, as defined in Council Directive 92/83/EEC, for which it is intended to claim a reduced rate of excise duty in the Member State of destination. Certification should be given in the following terms: It is hereby certified that the product described has been brewed by an independent small brewery.
3. for ethyl alcohol distilled by a small distillery, as defined in Directive 92/83/EEC, for which it is intended to claim a reduced rate of excise duty in the Member State of destination. Certification should be given in the following terms: It is hereby certified that the product described has been produced by a small distillery. an..350 mDesignation of Origin_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2nSize of ProducerO For beer or spirits, for which certification is given in the field 17l (Designation of Origin), provide the annual production of the previous year in hectolitres of beer or in hectolitres of pure alcohol respectively. The value of this data element must be greater than zero. n..15oDensityCR if applicable for the excise good in question Provide the density at 15 °C, if applicable in accordance with Code list 11 of Annex II. The value of this data element must be greater than zero. n..5,2pCommercial DescriptionOThe Member State of dispatch may decide to make this data required Provide the commercial description of the goods in order to identify the products transported. For the bulk transport of the wines referred to in paragraphs 1 to 9, 15 and 16 of Part II of Annex VII to Regulation (EU) No 1308/2013 the product description shall contain the optional particulars set out in Article 120 of that Regulation, provided that they are shown on the labelling or that it is planned to show them on the labelling. an..350qCommercial Description_LNGCR if corresponding text field is usedProvide language code presented in Code list 1 of Annex II to define the language used in this data group.a2 rBrand Name of ProductsDR if the excise goods have a brand name. The Member State of dispatch may decide that the brand name of the products transported must not be provided if it is given in the invoice or other commercial document referred to in box 9bProvide the brand name of the goods, if applicable.an..350sBrand Name of Products_LNGCR if corresponding text field is usedProvide language code presented in Code list 1 of Annex II to define the language used in this data group.a217.1PACKAGER99xaKind of Packages CodeRProvide the kind of package using one of the codes in Code list 9 of Annex II.an2bNumber of PackagesCR if marked Countable

Provide the number of packages if the packages are countable in accordance with Code list 9 of Annex II. In case the Number of Packages is set to 0, then there should exist at least one PACKAGE with the same Shipping Marks and Number of Packages with value greater than 0. n..15cIdentity of Commercial SealDR if commercial seals are usedProvide the identification of the commercial seals, if used to seal the packages.an..35dSeal InformationOProvide any additional information concerning those commercial seals (e.g. type of seals used).an..350eSeal Information_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2fShipping MarksC R if Number of Packages is 0 O Otherwise an..99917.2WINE PRODUCTDR for wine products included in Part XII of Annex I to Regulation (EU) No 1308/2013aCategory of Wine ProductR For wine products included in Part XII of Annex I to Regulation (EU) No 1308/2013, provide one of the following values: 1 = Wine without PDO/PGI, 2 = Varietal wine without PDO/PGI, 3 = Wine with PDO or PGI, 4 = Imported wine, 5 = Other. n1 bWine-Growing Zone CodeDR for wine products in bulk (nominal volume of more than 60 litres)Provide the wine-growing zone in which the product transported originates in accordance with Appendix 1 of Annex VII to Regulation (EU) No 1308/2013.n..2cThird Country of OriginCR if Category of Wine Product in box 17.2a is 4 (imported wine)Provide a Country Code listed in Code list 4 of Annex II, but not listed in Code list 3 of Annex II and except ‘Country Code GR.a2dOther InformationOan..350eOther Information_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a217.2.1WINE OPERATION CODEDR for wine products in bulk (nominal volume of more than 60 litres)99xaWine Operation CodeRProvide one or several Wine operation Code(s) in accordance with the list in point 1.4(b) of part B of Annex VI to Regulation (EC) No 436/2009.n..218DOCUMENT CERTIFICATEO9xaShort Description of DocumentCR, unless data field 18c or 18e is usedProvide a description of any certificate that relates to the transported goods, for instance certificates related to the Designation of Origin referred to in box 17l.an..350bShort Description of Document_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2cReference of DocumentCR, unless data field 18a or 18e is usedProvide a reference to any certificate that relates to the transported goods.an..350dReference of Document_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2 eDocument TypeCR, unless data field 18a or 18c is usedProvide the document type code presented in Code List 15 of Annex II to Regulation (EU) 2016/323.an..4fDocument ReferenceCR if Document Type in box 18e is usedan..35

Table 5 (referred to in Article 6(1) and Article 8(2)) Splitting operation ABCDEFG1E-AD SPLITTINGRaUpstream ARCR Provide the ARC of the e-AD to be split. See Code list 2 of Annex II. an212MSA OF SPLITTINGRaMember State CodeRProvide the Member State in the territory of which is carried out the splitting of the movement using the Member State code in Code list 3 of Annex II.a23E-AD Split DetailsRSplitting is achieved by fully replacing the concerned e-AD by two or several new ones.9xaLocal Reference NumberRA unique serial number assigned to the e-AD by the consignor which identifies the consignment in the records of the consignor.an..22bJourney TimeDR when the journey time changes following the splitting operationProvide the normal period of time necessary for the journey taking into account the means of transport and the distance involved, expressed in hours (H) or days (D) followed by a two-digit number (examples: H12, or D04). Indication for H should be less or equal to 24. Indication for D should be less or equal to the possible values of Maximum Journey Time per Transport Mode Code presented in Code list 13 of Annex II.an3cChanged Transport ArrangementDR when the person responsible for arranging the transport changes following the splitting operation Identify the person responsible for arranging the first transport using one of the following values: 1 = Consignor, 2 = Consignee, 3 = Owner of goods, 4 = Other. n1 3.1CHANGED DESTINATIONRaDestination Type CodeR Provide the destination of the movement using one of the following values: 1 = Tax warehouse (point (i) of Article 17(1)(a) of Directive 2008/118/EC), 2 = Registered consignee (point (ii) of Article 17(1)(a) of Directive 2008/118/EC), 3 = Temporary registered consignee (point (ii) of Article 17(1)(a) and Article 19(3) of Directive 2008/118/EC), 4 = Direct delivery (Article 17(2) of Directive 2008/118/EC), 6 = Export (point (iii) of Article 17(1)(a) of Directive 2008/118/EC), 8 = Unknown destination (consignee unknown; Article 22 of Directive 2008/118/EC). n13.2TRADER NEW CONSIGNEEC O if the Destination Type Code is other than 8 (See Destination Type Codes in box 3.1a) For Destination Type Code: 1, 2, 3, 4 and 6: Change of the consignee following the splitting operation renders this data group R. aTrader IdentificationC R for Destination Type Code 1, 2, 3 and 4 O for Destination Type Code 6 This data element does not apply for Destination Type Code 8 (See Destination Type Codes in box 3.1a) For Destination Type Code: 1, 2, 3 and 4: provide a valid SEED registration number of the authorised warehousekeeper or registered consignee, 6: provide the VAT identification number of the person representing the consignor at the office of export. an..16bTrader NameRan..182cStreet NameRan..65dStreet NumberOan..11ePostcodeRan..10fCityRan..50 gNAD_LNGRProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2hEORI NumberC O for Destination Type Code 6 This data element does not apply for Destination Type Code 1, 2,3, 4 and 8

(See Destination Type Codes in box 3.1a) Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(5) of Directive 2008/118/EC.an..173.3TRADER PLACE OF DELIVERYC R for Destination Type Code 1 and 4 O for Destination Type Code 2 and 3 (See Destination Type Codes in box 3.1a) aTrader IdentificationC R for Destination Type Code 1 O for Destination Type Code 2 and 3 (See Destination Type Codes in box 3.1a) For Destination Type Code: 1: provide a valid SEED registration number of the tax warehouse of destination, 2 and 3: provide the VAT identification number or any other identifier. an..16bTrader NameC R for Destination Type Code 1, 2 and 3 O for Destination Type Code 4 (See Destination Type Codes in box 3.1a) an..182cStreet NameC For box 3.3c, 3.3e and 3.3f: R for Destination Type Code 2, 3 and 4 O for Destination Type Code 1 (See Destination Type Codes in box 3.1a) an..65dStreet NumberOan..11ePostcodeCan..10fCityCan..50gNAD_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a23.4OFFICE PLACE OF DELIVERY — CUSTOMSC R in case of export (Changed Destination Type Code 6) (See Destination Type Codes in box 3.1a) aOffice Reference NumberR Provide the code of the office of export at which the export declaration will be lodged in accordance with Article 161(5) of Regulation (EEC) No 2913/92. See Code list 5 of Annex II. an8 3.5TRADER NEW TRANSPORT ARRANGERCR to identify the person responsible for arranging the transport if the value in box 3c is 3 or 4aVAT NumberOThe Member State of dispatch may decide to make this data Ran..14bTrader NameRan..182cStreet NameRan..65dStreet NumberOan..11ePostcodeRan..10fCityRan..50gNAD_LNGRProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a23.6TRADER NEW TRANSPORTEROThe Member State of dispatch may decide to make this data R when the transporter changes following the splitting operationIdentify the person carrying out the new transport.aVAT NumberOan..14bTrader NameRan..182cStreet NameRan..65dStreet NumberOan..11ePostcodeRan..10fCityRan..50gNAD_LNGRProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2 3.7TRANSPORT DETAILSDR when the transport details have changed following the splitting operation99XaTransport Unit CodeRProvide the Transport Unit Code(s). See Code list 8 of Annex II.n..2bIdentity of Transport UnitsC R if the Transport Unit Code is other than 5 (See box 3.7a) Enter the registration number of the transport unit(s) when the Transport Unit Code is other than 5.an..35cIdentity of Commercial SealDR if commercial seals are usedProvide the identification of the commercial seals, if used to seal the transport unit.an..35dSeal InformationOProvide any additional information concerning those commercial seals (e.g. type of seals used).an..350eSeal Information_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2fComplementary InformationOProvide any additional information concerning the transport, e.g. identity of any subsequent transporter, information concerning subsequent transport units.an..350gComplementary Information_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a23.8E-AD BODYRA separate data group must be used for each product composing the consignment.999xaBody Record Unique ReferenceR

Provide the Body Record Unique Reference of the product in the original split e-AD. The Body Record Unique Reference must be unique per e-AD Split Details. The value of this data element must be greater than zero. n..3bExcise Product CodeRProvide the applicable excise product code, see Code list 11 of Annex II.an..4 cCN CodeR Provide the CN code applicable at the date of submission of the splitting operation. The value of this data element must be greater than zero. n8dQuantityR Provide quantity (expressed in the unit of measurement associated with the product code — See Code lists 11 and 12 of Annex II). For a movement to a registered consignee referred to in Article 19(3) of Directive 2008/118/EC, the quantity shall not exceed the quantity which he is authorised to receive. For a movement to an exempted organisation referred to in Article 12 of Directive 2008/118/EC, the quantity shall not exceed the quantity registered in the excise duty exemption certificate. The value of this data element must be greater than zero. n..15,3eGross WeightR Provide the gross weight of the consignment (the excise goods with packaging). The value of this data element must be greater than zero. The Gross Weight must be equal to or higher than Net Weight. n..15,2fNet WeightR Provide the weight of the excise goods without packaging. The value of this data element must be greater than zero. The Gross Weight must be equal to or higher than Net Weight. n..15,2iFiscal MarkOProvide any additional information concerning the fiscal marks required by the Member State of destination.an..350jFiscal Mark_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 in Annex II to define the language used in this data group.a2 kFiscal Mark Used flagDR if fiscal marks are usedProvide 1 if the goods contain or carry fiscal marks or 0 if the goods do not contain or carry fiscal marks.n1oDensityCR if applicable for the excise good in question Provide the density at 15 °C, if applicable in accordance with Code list 11 in the table in Annex II. The value of this data element must be greater than zero. n..5,2pCommercial DescriptionOThe Member State of dispatch may decide to make this data requiredProvide the commercial description of the goods in order to identify the products transported.an..350qCommercial Description_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2rBrand Name of ProductsDR if the excise goods have a brand nameProvide the brand name of the goods, if applicable.an..350sBrand Name of Products_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a23.8.1PACKAGER99xaKind of Packages CodeRProvide the kind of package, using one of the codes in Code list 9 of Annex II.an2bNumber of PackagesCR if marked Countable Provide the number of packages if the packages are countable in accordance with Code list 9 of Annex II.

In case the Number of Packages is set to 0, then there should exist at least one PACKAGE with the same Shipping Marks and Number of Packages with value greater than 0. n..15—cIdentity of Commercial SealDR if commercial seals are usedProvide the identification of the commercial seals, if used to seal the packages.an..35 dSeal InformationOProvide any additional information concerning those commercial seals (e.g. type of seals used).an..350eSeal Information_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2fShipping MarksC R if Number of Packages is 0 O Otherwise an..999