Council Regulation (EU) 2021/2283 of 20 December 2021 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products, and repealing Regulation (EU) No 1388/2013

Council Regulation (EU) 2021/2283 of 20 December 2021 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products, and repealing Regulation (EU) No 1388/2013 THE COUNCIL OF THE EUROPEAN UNION, Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof, Having regard to the proposal from the European Commission, Whereas: (1) The production of certain agricultural and industrial products in the Union is insufficient to meet the specific requirements of the user industries in the Union. Consequently, Union supplies of those products depend on imports from third countries. The most urgent Union requirements for the products concerned should be met immediately on the most favorable terms. Autonomous tariff quotas of the Union (quotas) at preferential quota duty rates should therefore be opened within the limits of appropriate quota volumes, taking account of the need not to disturb the markets for such products or impede the establishment or development of production in the Union. (2) It is necessary to ensure equal and uninterrupted access to the quotas for all importers in the Union and to ensure the uninterrupted application of the quota duty rates laid down for those quotas to all imports of the products concerned into all Member States until the quotas have been exhausted. (3) Commission Implementing Regulation (EU) 2015/2447 Commission Implementing Regulation (EU) 2015/2447 of 24 November 2015 laying down detailed rules for implementing certain provisions of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code (OJ L 343, 29.12.2015, p. 558). provides for a system of quota management which ensures equal and uninterrupted access to the quotas and uninterrupted application of the quota duty rates, and which follows the chronological order of the dates of acceptance of declarations of release for free circulation. The quotas opened by this Regulation should therefore be managed by the Commission and the Member States in accordance with that system. (4) The quota volumes are mostly expressed in supplementary units of weight. For certain products for which a quota is opened, the quota volume is set out in another supplementary unit. Where no supplementary unit is specified for those products in the Combined Nomenclature laid down in Annex I to Council Regulation (EEC) No 2658/87 Council Regulation (EEC) No 2658/87 of 23 July 1987 on the tariff and statistical nomenclature and on the Common Customs Tariff (OJ L 256, 7.9.1987, p. 1). (the Combined Nomenclature), there can be uncertainty in respect of the supplementary unit used. For the sake of clarity and in the interests of better quota management, it is therefore necessary to provide that, in order to benefit from those quotas, the exact quantity of the products imported be entered in the declaration for release for free circulation using the supplementary unit of the quota volume set out for those products in this Regulation.

(5) It is necessary to clarify that any mixtures, preparations or products made up of different components containing products subject to quotas should be excluded from the scope of this Regulation, as only the products as described in this Regulation should be subject to the quotas. (6) Council Regulation (EU) No 1388/2013 Council Regulation (EU) No 1388/2013 of 17 December 2013 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products, and repealing Regulation (EU) No 7/2010 (OJ L 354, 28.12.2013, p. 319). has been amended many times. In addition, as the coding of the Combined Nomenclature has been updated by Commission Implementing Regulation (EU) 2021/1832 Commission Implementing Regulation (EU) 2021/1832 of 12 October 2021 amending Annex I to Council Regulation (EEC) No 2658/87 on the tariff and statistical nomenclature and on the Common Customs Tariff (OJ L 385, 29.10.2021, p. 1). , a large number of changes to Regulation (EU) No 1388/2013 would be required. Therefore, in the interests of clarity and transparency, that Regulation should be replaced in its entirety. (7) In accordance with the principle of proportionality, it is necessary and appropriate for the achievement of the basic objective of promoting trade between Member States and third countries to lay down rules in order to balance the different commercial interests of economic operators in the Union without changing the Union’s World Trade Organization schedule. This Regulation does not go beyond what is necessary in order to achieve the objectives pursued in accordance with Article 5(4) of the Treaty on European Union. (8) In order to avoid any interruption of the application of the quota scheme and to comply with the guidelines set out in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the quotas for the products listed in this Regulation should apply from 1 January 2022. This Regulation should therefore enter into force as a matter of urgency, HAS ADOPTED THIS REGULATION:

Article 1

1. For the agricultural and industrial products listed in the Annex, autonomous tariff quotas of the Union (quotas) shall be opened.
2. Within the quotas referred to in paragraph 1 of this Article, the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 of the European Parliament and of the Council Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1). are suspended for the quota periods, at the quota duty rates and up to the quota volumes indicated in the Annex to this Regulation.
3. Paragraphs 1 and 2 do not apply to any mixtures, preparations or products made up of different components containing products listed in the Annex.

Article 2

The quotas referred to in Article 1 of this Regulation shall be managed by the Commission in accordance with Articles 49 to 54 of Implementing Regulation (EU) 2015/2447.

Article 3

Where a customs declaration for release for free circulation is lodged for products for which supplementary units have been provided in the Annex, the exact quantity of the products imported shall be entered in that declaration using the supplementary unit set out in the Annex.

Article 4

Regulation (EU) No 1388/2013 is repealed.

Article 5

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union. It shall apply from 1 January 2022. This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 20 December 2021. For the Council The President A. Vizjak

Annex

ANNEX Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013. However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings. Only the ad valorem duty is suspended. The specific duty shall continue to apply. Order numberCN codeTARICDescriptionQuota periodQuota volumeQuota duty rate09.2637 ex07104000 ex20058000 20 30 Corn cobs (Zea mays var. saccharata) whether or not cut, with a diameter of 10 mm or more, but not more than 20 mm, for use in the manufacture of products of the food industry for treatment other than simple repacking 1.1.-31.12.550 tonnes0 %09.2849ex0710806910Mushrooms of the species Auricularia polytricha (uncooked or cooked by steaming or boiling), frozen, for the manufacture of prepared meals 1.1.-31.12.700 tonnes0 %09.2664ex2008603930Sweet cherries containing added spirit, with a sugar content of not more than 9 % by weight, of a diameter of not more than 19,9 mm, with stones, for use in chocolate products1.1.-31.12.1000 tonnes10 %09.2740ex2309903187 Soya bean protein concentrate containing by weight: 60 % (± 10 %) of crude protein, 5 % (± 3 %) of crude fibre, 5 % (± 3 %) of crude ash, and 3 % or more but not more than 6,9 % of starch, for use in the manufacture of animal feed products 1.1.-31.12.30000 tonnes0 %09.2913 ex24011035 ex24011070 ex24011095 ex24011095 ex24011095 ex24012035 ex24012070 ex24012095 ex24012095 ex24012095 91 10 11 21 91 91 10 11 21 91 Natural unmanufactured tobacco, whether or not cut in regular size, having a custom value of not less than EUR 450 per 100 kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 240210001.1.-31.12.6000 tonnes0 %09.2586 ex27101981 ex27101999 20 40 Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing: 90 % or more by weight of saturates, and not more than 0,03 % by weight of sulphur, and with: a viscosity index of 80 or more, but less than 120, and a kinematic viscosity of 5,0 cSt at 100 °C or more, but not more than 13,0 cSt at 100 °C 1.1.-30.6.75000 tonnes0 %09.282827122090Paraffin wax containing by weight less than 0,75 % of oil1.1.-31.12.100000 tonnes0 %

09.2600ex2712903910Slack wax (CAS RN 64742-61-6)1.1.-31.12.100000 tonnes0 %09.2578ex2811198050Sulphamidic acid (CAS RN 5329-14-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of the anti-caking agent silicon dioxide (CAS RN 112926-00-8)1.1.-31.12.27000 tonnes0 %09.2928ex2811220040Silica filler in the form of granules, with a purity by weight of 97 % or more of silicon dioxide1.1.-31.12.1700 tonnes0 %09.2806ex2825904030Tungsten trioxide, including blue tungsten oxide (CAS RN 1314-35-8 or CAS RN 39318-18-8)1.1.-31.12.12000 tonnes0 %09.2872ex2833298040Caesium sulphate (CAS RN 10294-54-9) in solid form or as aqueous solution containing by weight 48 % or more but not more than 52 % of caesium sulphate1.1.-31.12.400 tonnes0 %09.2567ex2903220010Trichloroethylene (CAS RN 79-01-6) with a purity by weight of 99 % or more1.1.-31.12.11885000 kilograms0 %09.2837ex2903793020Bromochloromethane (CAS RN 74-97-5)1.1.-31.12.600 tonnes0 %09.2933ex29039980301,3-Dichlorobenzene (CAS RN 541-73-1)1.1.-31.12.2600 tonnes0 %09.2700ex2905120010Propan-1-ol (propyl alcohol) (CAS RN 71-23-8)1.1.-31.12.15000 tonnes0 %09.2830ex2906190040Cyclopropylmethanol (CAS RN 2516-33-8)1.1.-31.12.20 tonnes0 %09.2851ex2907120010O-cresol (CAS RN 95-48-7) having a purity of not less than 98,5 % by weight1.1.-31.12.20000 tonnes0 %09.2704ex29094980202,2,2',2'-Tetrakis(hydroxymethyl)-3,3'-oxydipropan-1-ol (CAS RN 126-58-9)1.1.-31.12.500 tonnes0 %09.2565ex2914199070Calcium acetylacetonate (CAS RN 19372-44-2) with a purity by weight of 95 % or more1.1.-31.12.400 tonnes0 %09.2852ex2914290060Cyclopropyl methyl ketone (CAS RN 765-43-5)1.1.-31.12.300 tonnes0 %09.2638ex2915210010Acetic acid (CAS RN 64-19-7) of a purity by weight of 99 % or more1.1.-31.12.1000000 tonnes0 %09.267929153200Vinyl acetate (CAS RN 108-05-4)1.1.-31.12.400000 tonnes0 %09.2728ex2915907085Ethyl trifluoroacetate (CAS RN 383-63-1)1.1.-31.12.400 tonnes0 %09.2665ex2916199530Potassium (E,E)-hexa-2,4-dienoate (CAS RN 24634-61-5)1.1.-31.12.8250 tonnes0 %09.2684ex29163990282,5-dimethylphenylacetyl chloride (CAS RN 55312-97-5)1.1.-31.12.700 tonnes0 %09.2599ex2917110040Diethyl oxalate (CAS RN 95-92-1)1.1.-31.12.500 tonnes0 % 09.2769ex2917139010Dimethyl sebacate (CAS RN 106-79-6)1.1.-31.12.1000 tonnes0 %09.2634ex2917198040Dodecanedioic acid (CAS RN 693-23-2), of a purity by weight of more than 98,5 %1.1.-31.12.8000 tonnes0 %09.2808ex2918220010O-acetylsalicylic acid (CAS RN 50-78-2)1.1.-31.12.120 tonnes0 %09.2646ex2918290075 Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate (CAS RN 2082-79-3) with: a sieve passing fraction at a mesh width of 500 μm of more than 99 % by weight, and a melting point of 49 °C or more, but not more than 54 °C, for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates) 1.1.-31.12.380 tonnes0 %09.2647ex2918290080 Pentaerythritol tetrakis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS RN 6683-19-8) wita h:

a sieve passing fraction at a mesh width of 250 μm of more than 75 % by weight and at a mesh width of 500 μm of more than 99 % by weight, and a melting point of 110 °C or more, but not more than 125 °C, for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates) 1.1.-31.12.140 tonnes0 %09.2975ex2918300010Benzophenone-3,3',4,4'-tetracarboxylic dianhydride (CAS RN 2421-28-5)1.1.-31.12.1000 tonnes0 %09.2688ex2920290070Tris (2,4-di-tert-butylphenyl)phosphite (CAS RN 31570-04-4)1.1.-31.12.6000 tonnes0 %09.2598ex2921199975Octadecylamine (CAS RN 124-30-1)1.1.-31.12.400 tonnes0 %09.2649ex2921290060Bis(2-dimethylaminoethyl)(methyl)amine (CAS RN 3030-47-5)1.1.-31.12.1700 tonnes0 %09.2682ex2921410010Aniline (CAS RN 62-53-3) with a purity by weight of 99 % or more1.1.-31.12.150000 tonnes0 %09.2617ex29214200894-Fluoro-N-(1-methylethyl)benzeneamine (CAS RN 70441-63-3)1.1.-31.12.500 tonnes0 %09.2602ex2921511910o-phenylenediamine (CAS RN 95-54-5)1.1.-31.12.1800 tonnes0 %09.2563ex2922410020L-Lysine hydrochloride (CAS RN 657-27-2) or an aqueous solution of L-lysine (CAS RN 56-87-1), containing by weight 50 % or more of L-lysine1.1.-30.6.122500 tonnes0 %09.2592ex2922500025L-Threonine (CAS RN 72-19-5)1.1.-31.12.166000 tonnes0 %09.2575ex29239000873-Chloro-2-hydroxypropyl)trimethylammonium chloride (CAS RN 3327-22-8), in the form of an aqueous solution containing by weight 65 % or more but not more than 71 % 3-chloro-2-hydroxypropyl)trimethylammonium chloride1.1.-31.12.19000 tonnes0 % 09.2854ex29241900853-iodoprop-2-yn-1-yl butylcarbamate (CAS RN 55406-53-6)1.1.-31.12.400 tonnes0 %09.2874ex2924297087Paracetamol (INN) (CAS RN 103-90-2)1.1.-31.12.20000 tonnes0 %09.2742ex2926100010Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of chapter 55 and heading 68151.1.-31.12.60000 tonnes0 %09.2583ex2926100020Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of headings 2921, 2924, 3906 and 40021.1.-31.12.40000 tonnes0 %09.2856ex29269070842-Nitro-4(trifluoromethyl)benzonitrile (CAS RN 778-94-9)1.1.-31.12.900 tonnes0 %09.2708ex2928009015Monomethylhydrazine (CAS RN 60-34-4) in the form of an aqueous solution with a content by weight of monomethylhydrazine of 40 (± 5) %1.1.-31.12.900 tonnes0 %09.2581ex29291000251,5-Naphthylene diisocyanate (CAS RN 3173-72-6) with a purity by weight of 90 % or more1.1.-31.12.300 tonnes0 %09.2685ex2929900030Nitroguanidine (CAS RN 556-88-7)1.1.-31.12.6500 tonnes0 %09.2597ex2930909894Bis[3-(triethoxysilyl)propyl]disulphide (CAS RN 56706-10-6)1.1.-31.12.6000 tonnes0 %09.2596ex29309098962-Chloro-4-(methylsulphonyl)-3-((2,2,2-trifluoroethoxy)methyl) benzoic acid (CAS RN 120100-77-8)1.1.-31.12.300 tonnes0 %09.2580ex2931900075Hexadecyltrimethoxysilane (CAS RN 16415-12-6) with a purity by weight of at least 95 %, for use in the manufacture of polyethylene1.1.-31.12.165 tonnes0 %09.2842293212002-Furaldehyde (furfuraldehyde)1.1.-31.12.10000 tonnes0 %09.2696ex2932209025Decan-5-olide (CAS RN 705-86-2)1.1.-31.12.6000 kilograms0 %09.2697ex2932209030Dodecan-5-olide (CAS RN 713-95-1)1.1.-31.12.6000 kilograms0 %09.2812ex2932209077Hexan-6-olide (CAS RN 502-44-3)1.1.-31.12.4000 tonnes0 %09.285829329300Piperonal (CAS RN 120-57-0)1.1.-31.12.220 tonnes0 %09.2673ex29333999432,2,6,6-Tetramethylpiperidin-4-ol (CAS RN 2403-88-5)1.1.-31.12.1000 tonnes0 %09.2880ex2933599539Ibrutinib (INN) (CAS RN 936563-96-1)1.1.-31.12.5 tonnes0 %09.2860ex29336980301,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine (CAS RN 15875-13-5)1.1.-31.12.600 tonnes0 %09.2566ex29339980051,4,7,10-Tetraazacyclododecane (CAS RN 294-90-6) with a purity by weight of 96 % or more1.1.-31.12.60 tonnes0 %09.2658ex29339980735-(Acetoacetylamino)benzimidazolone (CAS RN 26576-46-5)1.1.-31.12.400 tonnes0 %

09.2593ex29349990675-Chlorothiophene-2-carboxylic acid (CAS RN 24065-33-6)1.1.-31.12.45000 kilograms0 %09.2675ex29359090794-[[(2-Methoxybenzoyl)amino]sulfonyl]benzoyl chloride (CAS RN 816431-72-8)1.1.-31.12.1000 tonnes0 %09.2710ex29359090912,4,4-trimethylpentan-2-aminium (3R,5S,6E)-7-{2-[(ethylsulfonyl)amino]- 4-(4-fluorophenyl)-6-(propan-2-yl)pyrimidin-5-yl}-3,5-dihydroxyhept-6- enoate (CAS RN 917805-85-7)1.1.-31.12.5000 kilograms0 %09.2945ex2940000020D-Xylose (CAS RN 58-86-6)1.1.-31.12.400 tonnes0 %09.2686ex3204110075Colourant C.I. Disperse Yellow 54 (CAS RN 7576-65-0) and preparations based thereon with a colourant C.I. Disperse Yellow 54 content of 99 % or more by weight1.1.-31.12.250 tonnes0 %09.2676ex3204170014Preparations based on Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) with a content thereof of 60 % or more but less than 85 % by weight1.1.-31.12.50 tonnes0 %09.2698ex3204170030Colourant C.I. Pigment Red 4 (CAS RN 2814-77-9) and preparations based thereon with a colourant C.I. Pigment Red 4 content of 60 % or more by weight1.1.-31.12.150 tonnes0 %09.2659ex3802900019Soda flux calcinated diatomaceous earth1.1.-31.12.35000 tonnes0 %09.2908ex3804000010Sodium lignosulphonate (CAS RN 8061-51-6)1.1.-31.12.40000 tonnes0 %09.288938051090Sulphate turpentine1.1.-31.12.25000 tonnes0 %09.2935ex3806100010Rosin and resin acids obtained from fresh oleoresins1.1.-31.12.280000 tonnes0 %09.2832ex3808929040Preparation containing 38 % or more but not more than 50 % by weight of pyrithione zinc (INN) (CAS RN 13463-41-7) in an aqueous dispersion1.1.-31.12.500 tonnes0 %09.2876ex3811290055 Additives consisting of reaction products of diphenylamine and branched nonenes containing by weight: 28 % or more, but not more than 55 % of 4-monononyldiphenylamine, 45 % or more but not more than 65 % of 4,4'-dinonyldiphenylamine, and not more than 5 % of 2, 4-dinonyldiphenylamine and 2, 4'-dinonyldiphenylamine, used for the manufacture of lubricating oils 1.1.-31.12.900 tonnes0 %09.2814ex3815909076Catalyst consisting of titanium dioxide and tungsten trioxide1.1.-31.12.3000 tonnes0 % 09.2644ex3824999277 Preparation containing by weight: 55 % or more but not more than 78 % of dimethyl gluterate (CAS RN 1119-40-0), 10 % or more but not more than 30 % of dimethyl adipate (CAS RN 627-93-0), and not more than 35 % of dimethyl succinate (CAS RN 106-65-0) 1.1.-31.12.10000 tonnes0 %09.2681ex3824999285Mixture of bis [3-(triethoxysilyl)propyl]sulphides (CAS RN 211519-85-6)1.1.-31.12.9000 tonnes0 %09.2650ex3824999287Acetophenone (CAS RN 98-86-2), with a purity by weight of 60 % or more but not more than 90 %1.1.-31.12.2000 tonnes0 %09.2888ex3824999289 Mixture of tertiary alkyldimethyl amines containing by weight: 60 % or more but not more than 80 % of dodecyldimethylamine (CAS RN 112-18-5), and 20 % or more but not more than 30 % of dimethyl(tetradecyl)amine (CAS RN 112-75-4) 1.1.-30.6.10000 tonnes0 %09.2829ex3824999343 Solid extract of the residual, insoluble in aliphatic solvents, obtained during the extraction of rosin from wood, having the following characteristics:

a resin acid content not exceeding 30 % by weight, an acid number not exceeding 110, and a melting point of 100 °C or more 1.1.-31.12.1600 tonnes0 %09.2907ex3824999367 Mixture of phytosterols, in the form of powder, containing by weight: 75 % or more of sterols, not more than 25 % of stanols, for use in the manufacture of stanols/sterols or stanol/sterol esters 1.1.-31.12.2500 tonnes0 %09.2568ex3824999691 Mixture, in pellet form, containing by weight: 49 % or more but not more than 50 % of bis[3-(triethoxysilyl)propyl] polysulphides (CAS RN 211519-85-6), and 50 % or more but not more than 51 % of carbon black (CAS RN 1333-86-4), of which 75 % by weight or more pass through a sieve with an aperture of 0,60 mm, but not more than 10 % pass through a sieve with an aperture of 0,25 mm (as determined by the ASTM D1511 method) 1.1.-31.12.1500 tonnes0 %09.2820ex3827900010 Mixtures containing by weight: 60 % or more but not more than 90 % of 2-chloropropene (CAS RN 557-98-2), 8 % or more but not more than 14 % of (Z)-1-chloropropene (CAS RN 16136-84-8), 5 % or more but not more than 23 % of 2-chloropropane (CAS RN 75-29-6), not more than 6 % of 3-chloropropene (CAS RN 107-05-1), and not more than 1 % of ethyl chloride (CAS RN 75-00-3) 1.1.-31.12.6000 tonnes0 % 09.2671ex3905999081 Poly(vinyl butyral)(CAS RN 63148-65-2): containing by weight 17,5 % or more, but not more than 20 % of hydroxyl groups, and with a median particle size (D50) of more than 0,6 mm 1.1.-31.12.12500 tonnes0 %09.2846ex3907400025Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of not less than 98,5 % by weight, in the form of pellets or granules, with a luminous transmittance of not less than 88,5 %, measured using a test sample with a thickness of 4 mm at a wavelength of λ = 400 nm (according to ISO 13468-2)1.1.-31.12.2000 tonnes0 %09.2585ex3907998070Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol1.1.-31.12.60000 tonnes2 %09.2723ex3911901910Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-4,4'-biphenylene)1.1.-31.12.5000 tonnes0 %09.2816ex3912110020Cellulose acetate flakes1.1.-31.12.75000 tonnes0 %09.2573ex3913100020 Sodium alginate extracted from brown seaweed, with a loss on drying of not more than 15 % by weight (4h at 105 °C), a water-insoluble fraction of not more than 2 % by weight, calculated on the dry weight 1.1.-31.12.2000 tonnes0 %09.2641ex3913900087 Sodium hyaluronate, non sterile, with: a weight average molecular weight (Mw) of not more than 900000, an endotoxin level of not more than 0,008 Endotoxin units (EU)/mg, an ethanol content of not more than 1 % by weight, an isopropanol content of not more than 0,5 % by weight 1.1.-31.12.300 kilograms0 %09.2661ex3920510050 Sheets of polymethylmethacrylate conforming to standards: EN 4364 (MIL-P-5425E) and DTD5592A, or EN 4365 (MIL-P-8184) and DTD5592A 1.1.-31.12.100 tonnes0 %09.2645ex3921140020Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) x 100 cm (± 10 cm) x 40 cm (± 5 cm)1.1.-31.12.1700 tonnes0 %09.2572

ex52052600 ex52052700 10 10 Raw white single cotton yarn of combed fibres, with an average fibre length of 36,5 mm or more, produced through the compact ring spinning process with pneumatic compression, with a tear strength of 26,5 cN/tex or more (according to ISO 2062:2009, at a speed of 5000 mm/min) 1.1.-31.12.50000 tonnes0 % 09.2576ex5208121620 Unbleached woven fabric in plain weave, with: a width of not more than 145 cm, a weight of 120 g/m2 or more, but not more than 130 g/m2, 30 or more, but not more than 45 wefts per cm, a tuck-in selvedge on both sides, where from the inside out, the 15 mm (± 2mm) wide tuck-in selvedge consists of a 6 mm or more but not more than 9 mm wide strip of plain weave and a 6 mm or more but not more than 9 mm wide strip of panama weave 1.1.-31.12.1500000 square meters0 %09.2577ex5208129620 Unbleached woven fabric in plain weave, with: a width of not more than 145 cm, a weight of more than 130 g/m2, but not more than 145 g/m2 30 or more, but not more than 45 wefts per cm, a tuck-in selvedge on both sides, where from the inside out, the 15mm (± 2mm wide) tuck-in selvedge consists of a 6 mm or more but not more than 9 mm wide strip of plain weave and a 6 mm or more but not more than 9 mm wide strip of panama weave 1.1.-31.12.2300000 square meters0 %09.2848ex5505101010Waste of synthetic fibres (including noils, yarn waste, and garnetted stock) of nylon or other polyamides (PA6 and PA66)1.1.-31.12.10000 tonnes0 %09.2721ex5906999020 Woven and laminated rubberised textile fabric with the following characteristics: with three layers, one outer layer consists of acrylic fabric, the other outer layer consists of polyester fabric, the middle layer consists of chlorobutyl rubber, the middle layer has a weight of 452 g/m2 or more but not more than 569 g/m2, the textile fabric has a total weight of 952 g/m2 or more but not more than 1159 g/m2, and the textile fabric has a total thickness of 0,8 mm or more but not more than 4 mm, used for the manufacture of the retractable roof of motor vehicles 1.1.-31.12.375000 square meters0 %09.2866 ex70191200 ex70191200 06 26 S glass stratifils (rovings): composed of continuous glass filaments of 9 μm (± 0,5 μm), measuring 200 tex or more but not more than 680 tex, not containing any calcium oxide, and with a breaking strength of more than 3550 MPa determined by ASTM D2343-09, for use in the manufacture of aeronautics 1.1.-31.12.1000 tonnes0 %09.2628ex7019660010Glass web woven from glass fibre coated in plastic, of a weight of 120 g/m2(± 10 g/m2), of a type used in rolling insect screens with fixed frames1.1.-31.12.3000000 square meters0 % 09.2799ex7202499010Ferro-chromium containing 1,5 % or more but not more than 4 % by weight of carbon and not more than 70 % of chromium1.1.-31.12.50000 tonnes0 %09.2652 ex74091100 ex74101100 30 40 Refined copper foil and strips, electrolytically manufactured, with a thickness of 0,015 mm or more1.1.-31.12.1020 tonnes0 %09.2734ex7409190020 Plates or sheets consisting of:

a layer of a silicon nitride ceramic with a thickness of 0,32 mm (± 0,1 mm) or more but not more than 1,0 mm (± 0,1 mm), covered on both sides with a foil of refined copper with a thickness of 0,8 mm (± 0,1 mm), and on one side partially covered with a coating of silver 1.1.-31.12.7000000 pieces0 %09.2662ex7410210055 Plates: consisting of at least one layer of fibreglass fabric impregnated with epoxide resin, covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, with a comparative tracking index (CTI) of 600 or more 1.1.-31.12.80000 square meters0 %09.2835ex7604291030Aluminium alloy rods with a diameter of 300,1 mm or more, but not more than 533,4 mm1.1.-31.12.1000 tonnes0 %09.2736 ex76071190 ex76071190 ex76071190 ex76071190 75 77 78 79 Aluminium and magnesium alloy strip or foil: of an alloy conforming to standards 5182-H19 or 5052-H19, in rolls with an outside diameter of minimum 1250 mm but not more than 1350 mm, of a thickness (tolerance – 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm, of a width (tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, having a camber tolerance of not more than 0,4 mm/750 mm, of a flatness measurement: I-unit ± 4, having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, and of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %, for use in the manufacture of slats for blinds 1.1.-31.12.600 tonnes0 %09.272281041100Unwrought magnesium, containing at least 99,8 % by weight of magnesium1.1.-31.12.120000 tonnes0 %09.2840ex8104300020 Magnesium powder: of purity by weight of 98 % or more, but not more than 99,5 %, and with a particle size of 0,2 mm or more but not more than 0,8 mm 1.1.-31.12.2000 tonnes0 % 09.2629ex8302490091Aluminium telescopic handle for use in the manufacture of luggage1.1.-31.12.1500000 pieces0 %09.2720ex8413910050 Pump head for two cylinder high pressure pump made of forged steel, with: milled threaded fittings with a diameter of 10 mm or more but not more than 36,8 mm, and drilled fuel channels with a diameter of 3,5 mm or more but not more than 10 mm, of a kind used in diesel injection systems 1.1.-31.12.65000 pieces0 %09.2569ex8414900080 Turbocharger wheel housing of cast aluminium alloy or cast iron: with a heat resistance up to 400 °C, with a hole of 30 mm or more but not more than 300 mm for the insertion of the compressor wheel, for use in the automotive industry 1.1.-31.12.4000000 pieces0 %09.2570ex8482919010 Rollers with a logarithmic profile and a diameter of 25 mm or more but not more than 70 mm or balls with a diameter of 30 mm but not more than 100 mm, made of 100Cr6 steel or 100CrMnSi6-4 steel (ISO 3290), with a deviation of 0,5 mm or less as determined with the FBH method for use in wind turbine industry

1.1.-31.12.600000 pieces0 %09.2738ex8482990030 Brass cages with the following characteristics: continuously or centrifugally cast, turned, containing by weight 35 % or more, but not more than 38 % of zinc, containing by weight 0,75 % or more, but not more than 1,25 % of lead, containing by weight 1,0 % or more, but not more than 1,4 % of aluminium, and with a tensile strength of 415 Pa or more, of a kind used for the manufacture of ball bearings 1.1.-31.12.50000 pieces0 %09.2763 ex85014020 ex85014080 40 30 Electric AC commutator motor, single-phase, with an output of 250 W or more, an input power of 700 W or more but not more than 2700 W, an external diameter of more than 120 mm (± 0,2 mm) but not more than 135 mm (± 0,2 mm), a rated speed of more than 30000 rpm but not more than 50000 rpm, equipped with air-inducting ventilator, for use in the manufacture of vacuum cleaners1.1.-31.12.2000000 pieces0 %09.2672 ex85299092 ex94054231 75 70 Printed circuit board with LED diodes: whether or not equipped with prisms/lens, and whether or not fitted with connector(s) for the manufacture of backlight units for goods of heading 8528 1.1.-31.12.115000000 pieces0 % 09.2574ex8537109173 Multifunctional device (instrument cluster) with: curved TFT LCD display (radius 750 mm) with touch-sensitive surfaces, microprocessors and memory chips, acoustic module and loudspeaker, connections for CAN, 3 x LIN bus, LVDS and Ethernet, for operating various functions (e.g. chassis, lighting) and for situation-related display of vehicle and navigation data (e.g. speed, odometer, charge level of the drive battery), for use in the manufacture of passenger cars powered solely by an electric motor covered by HS subheading 870380 1.1.-31.12.66900 pieces0 %09.2003ex8543709063Voltage controlled frequency generator, consisting of active and passive elements mounted on a printed circuit, contained in a housing with dimensions of not more than 30 mm x 30 mm1.1.-31.12.1400000 pieces0 %09.2910ex8708999775Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 871.1.-31.12.200000 pieces0 %09.2694ex8714109030Axle clamps, housings, fork bridges and clamping pieces, of aluminium alloy of a kind used for motor bikes1.1.-31.12.1000000 pieces0 %09.2668 ex87149110 ex87149110 ex87149110 21 31 75 Bicycle frame, constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including electric bicycles)1.1.-31.12.600000 pieces0 %09.2564 ex87149110 ex87149110 ex87149110 25 35 77 Frame, constructed from aluminium or aluminium and carbon fibres and artificial resin, for the use in the manufacture of bicycles (including electric bicycles)1.1.-31.12.9600000 pieces0 %09.2579 ex90292031 ex90299000 40 40 Clustered instrument panel with: stepping motors, analog pointers and dials, or without microprocessor control board, or without LED indicators or LCD display,