Commission Implementing Decision (EU) 2022/180 of 8 February 2022 amending Decision 2006/771/EC as regards the update of harmonised technical conditions in the area of radio spectrum use for short-range devices (notified under document C(2022) 644)Text with EEA relevance.

Commission Implementing Decision (EU) 2022/180 of 8 February 2022 amending Decision 2006/771/EC as regards the update of harmonised technical conditions in the area of radio spectrum use for short-range devices (notified under document C(2022) 644) (Text with EEA relevance) THE EUROPEAN COMMISSION, Having regard to the Treaty on the Functioning of the European Union, Having regard to Decision No 676/2002/EC of the European Parliament and of the Council of 7 March 2002 on a regulatory framework for radio spectrum policy in the European Community OJ L 108, 24.4.2002, p. 1. , and in particular Article 4(3) thereof, Whereas: (1) Short-range devices are typically mass-market or portable radio equipment, or both, that can easily be carried and used across borders. Differences in spectrum access conditions in the internal market risk creating harmful interference with other radio applications and services, prevent their free movement, and increase their production costs. (2) Commission Decision 2006/771/EC Commission Decision of 9 November 2006 on harmonisation of the radio spectrum for use by short-range devices (2006/771/EC) (OJ L 312, 11.11.2006, p. 66). harmonises the technical conditions for spectrum use for a wide variety of short-range devices in applications areas such as alarms, local communications, telecommand, medical implants and medical data gathering, intelligent transport systems and the Internet of Things including radio-frequency identification (RFID). As a result, short-range devices that respect those harmonised technical conditions are subject to no more than a general authorisation under national law. (3) Commission Implementing Decision (EU) 2018/1538 Commission Implementing Decision (EU) 2018/1538 of 11 October 2018 on the harmonisation of radio spectrum for use by short-range devices within the 874-876 and 915-921 MHz frequency bands (OJ L 257, 15.10.2018, p. 57). additionally harmonises the technical conditions for spectrum use by short-range devices within the 874-874,4 and 915-919,4 MHz frequency bands. As in those frequency bands, the sharing environment is different, a specific regulatory regime is required. That Decision enables technically advanced RFID solutions as well as the Internet of Things applications based on networked short-range devices in data networks. (4) Decision 2006/771/EC and Implementing Decision (EU) 2018/1538 constitute the regulatory framework for short-range devices, which supports innovation for a wide range of applications within the digital single market. (5) New applications for short-range devices emerge due to the growing importance of these devices for the economy and to the rapid changes in technology and societal demands. Such applications require regular updates of harmonised technical conditions for spectrum use. (6) Based on the permanent mandate issued to the European Conference of Postal and Telecommunications Administrations (CEPT) in July 2006, pursuant to Article 4(2) of Decision No 676/2002/EC, to update the Annex to Decision 2006/771/EC in order to reflect technological and market developments in the area of short-range devices, that Annex has been amended seven times. The work carried out on the basis of the permanent mandate was also the basis for Implementing Decision (EU) 2018/1538 providing additional spectrum for short-range devices within the 874-874,4 and 915-919,4 MHz frequency ranges.

(7) On 16 July 2019, the Commission issued its guidance letter for the eighth update cycle. In response to the permanent mandate and in accordance with that guidance, CEPT submitted to the Commission its Report 77 on 5 March 2021. In addition to improvements to existing entries applicable to transport and traffic telematics devices, CEPT proposed to add new entries to the Annex to Decision 2006/771/EC. Those new entries should enable the use of spectrum for enclosed Nuclear Magnetic Resonance (NMR) applications. Therefore, that report should be the technical basis for this Decision. (8) Short-range devices operating within the conditions set out in this Decision should also comply with Directive 2014/53/EU of the European Parliament and of the Council Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC (OJ L 153, 22.5.2014, p. 62). . (9) Decision 2006/771/EC should therefore be amended. (10) The measures provided for in this Decision are in accordance with the opinion of the Radio Spectrum Committee, HAS ADOPTED THIS DECISION:

Article 1

Decision 2006/771/EC is amended as follows: (1) the following Article 4a is inserted:

Article 4a

Member States shall report to the Commission on the implementation of this Decision by 1 October 2022 at the latest.; (2) the Annex is replaced by the text set out in the Annex to this Decision.

Article 2

This Decision is addressed to the Member States. Done at Brussels, 8 February 2022. For the Commission Thierry Breton Member of the Commission

Annex

ANNEX

Annex

ANNEX Frequency bands with corresponding harmonised technical conditions and implementation deadlines for short-range devices Table 1 defines the scope of different categories of short-range devices (defined in Article 2(3)) to which this Decision applies. Table 2 specifies different combinations of frequency band and category of short-range devices, and the harmonised technical conditions for spectrum access and implementation deadlines applicable thereto. General technical conditions applicable to all bands and short-range devices that fall within the scope of this Decision: Member States shall allow adjacent frequency bands set out in Table 2 to be used as a single frequency band provided the specific conditions of each of these adjacent frequency bands are met. Member States shall allow the usage of spectrum up to the transmit power, field strength or power density set out in Table 2. Pursuant to Article 3(3), they may impose less restrictive conditions, that is to say allow the use of spectrum with higher transmit power, field strength or power density, provided it does not reduce or compromise the appropriate coexistence between short-range devices in bands harmonised by this Decision. Member States may only impose the additional parameters (channelling and/or channel access and occupation rules) set out in Table 2, and shall not add other parameters or spectrum access and mitigation requirements. Less restrictive conditions pursuant to Article 3(3), means that Member States may completely omit these additional parameters in a given cell or allow higher values, provided that the appropriate sharing environment in the harmonised band is not compromised.

Member States may only impose the other usage restrictions set out in Table 2 and shall not add additional usage restrictions. Since less restrictive conditions may be applied pursuant to Article 3(3), Member States may omit one or all of these restrictions, provided that the appropriate sharing environment in the harmonised band is not compromised. Less restrictive conditions pursuant to Article 3(3) shall apply without prejudice to Directive 2014/53/EU. For the purposes of this Annex, the following duty cycle definition applies: duty cycle means the ratio, expressed as a percentage, of Σ(Ton)/(Tobs) where Ton is the on time of a single transmitter device and Tobs is the observation period. Ton is measured in an observation frequency band (Fobs). Unless otherwise specified in this technical annex, Tobs is a continuous one hour period and Fobs is the applicable frequency band in this technical annex. Less restrictive conditions within the meaning of Article 3(3), mean that Member States may allow a higher value for duty cycle. Table 1 Categories of short-range devices pursuant to Article 2(3) and their scope Council Directive 90/385/EEC of 20 June 1990 on the approximation of the laws of the Member States relating to active implantable medical devices (OJ L 189, 20.7.1990, p. 17). Category of short-range devicesScopeNon-specific short-range devices (SRDs)Covers all kinds of radio devices, regardless of the application or their purpose, which fulfil the technical conditions as specified for a given frequency band. Typical uses include telemetry, telecommand, alarms, data transmissions in general and other applications. Active medical implant devicesCovers the radio part of active implantable medical devices that are intended to be fully or partially introduced, surgically or medically, into the human body or that of an animal, and where applicable their peripherals. Active implantable medical devices are defined in Council Directive 90/385/EEC.Assistive listening devices (ALDs)Covers radio communications systems that allow persons with hearing impairment to increase their listening capability. Typical system installations include one or more radio transmitters and one or more radio receivers.High duty cycle/continuous transmission devicesCovers radio devices that rely on low latency and high duty cycle transmissions. These devices are typically used for personal wireless audio and multimedia streaming systems used for combined audio/video transmissions and audio/video sync signals, mobile phones, automotive or home entertainment system, wireless microphones, cordless loudspeakers, cordless headphones, radio devices carried on a person, assistive listening devices, in-ear monitoring, wireless microphones for use at concerts or other stage productions, and low power analogue FM transmitters.Inductive devicesCovers radio devices that use magnetic fields with inductive loop systems for near field communications and determination applications. This typically includes devices for car immobilisation, animal identification, alarm systems, cable detection, waste management, personal identification, wireless voice links, access control, proximity and metal sensors, anti-theft systems as well as RF anti-theft induction systems, data transfer to hand-held devices, automatic article identification, wireless control systems and automatic road tolling.Low duty cycle/high reliability devicesCovers radio devices that rely on low overall spectrum utilisation and low duty cycle spectrum access rules to ensure highly reliable spectrum access and transmissions in shared bands. Typical applications include alarm systems that use radio communication for indicating an alert condition at a distant location and social alarm systems that allow reliable communication for a person in distress.Medical data acquisition devicesCovers the transmission of non-voice data to and from non-implantable medical devices in order to monitor, diagnose and treat patients in healthcare facilities or in their homes as prescribed by duly authorised healthcare professionals.PMR446 devicesCovers hand portable equipment (without base station or repeater use) carried on a person or manually operated, which uses integral antennas only in order to maximise sharing and minimise interference. PMR 446 equipment operates in short-range peer-to-peer mode and shall not be used as a part of infrastructure network nor as a repeater.Radio determination devicesCovers radio devices used for determining the position, velocity and/or other characteristics of an object, or for obtaining information relating to these parameters. Radio determination equipment typically conducts measurements to obtain such characteristics. Radio determination devices exclude any kind of point-to-point or point-to-multipoint radio communications.Radio frequency identification (RFID) devicesCovers tag/interrogator based radio communications systems, consisting of (i) radio devices (tags) attached to animate or inanimate items and (ii) transmitter/receiver units (interrogators) which activate the tags and receive data back. Typical applications include the tracking and identification of items, for instance for the purpose of electronic article surveillance (EAS), and collecting and transmitting data relating to the items to which tags are attached, which may be either battery-less, battery assisted or battery powered. The responses from a tag are validated by its interrogator and passed to its host system.

Transport and traffic telematics devicesCovers radio devices that are used in the fields of transport (road, rail, water or air, depending on the relevant technical restrictions), traffic management, navigation, mobility management and in intelligent transport systems (ITS). Typical applications include interfaces between different modes of transport, communication between vehicles (e.g. car to car), between vehicles and fixed locations (e.g. car to infrastructure) as well as communication from and to users.Wideband data transmission devicesCovers radio devices that use wideband modulation techniques to access the spectrum. Typical uses include wireless access systems such as radio local area networks (WAS/RLANs) or wideband SRDs in data networks. Table 2 Frequency bands with corresponding harmonised technical conditions and implementation deadlines for short-range devices Band noFrequency bandCategory of short-range devicesTransmit power limit/field strength limit/power density limitAdditional parameters (channelling and/or channel access and occupation rules)Other usage restrictionsImplemen-tation deadline19-59,750 kHzInductive devices72 dΒμΑ/m at 10 metres1 July 2014909-148 kHzRadio determination devices 46 dBμA/m at 10 m distance at a reference of 100 Hz, outside the Nuclear Magnetic Resonance (NMR) device. Magnetic field strength descending 10 dB/decade above 100Hz. For enclosed Nuclear Magnetic Resonance (NMR) applications [j].1 July 202229-315 kHzActive medical implant devices30 dΒμΑ/m at 10 metresDuty cycle limit: 10 %This set of usage conditions is only available to active implantable medical devices.1 July 2014359,750-60,250 kHzInductive devices42 dΒμΑ/m at 10 metres1 July 2014460,250-74,750 kHzInductive devices72 dBμA/m at 10 metres1 July 2014574,750-75,250 kHzInductive devices42 dBμA/m at 10 metres1 July 2014 675,250-77,250 kHzInductive devices72 dBμA/m at 10 metres1 July 2014777,250-77,750 kHzInductive devices42 dBμA/m at 10 metres1 July 2014877,750-90 kHzInductive devices72 dBμA/m at 10 metres1 July 2014990-119 kHzInductive devices42 dBμA/m at 10 metres1 July 201410119-128,6 kHzInductive devices66 dBμA/m at 10 metres1 July 201411128,6-129,6 kHzInductive devices42 dBμA/m at 10 metres1 July 201412129,6-135 kHzInductive devices66 dBμA/m at 10 metres1 July 201413135-140 kHzInductive devices42 dBμA/m at 10 metres1 July 201414140-148,5 kHzInductive devices37,7 dΒμΑ/m at 10 metres1 July 201415148,5-5000 kHz [1]Inductive devices -15 dΒμΑ/m at 10 metres in any bandwidth of 10 kHz. Furthermore the total field strength is -5 dΒμΑ/m at 10 m for systems operating at bandwidths larger than 10 kHz 1 July 201491148-5000 kHzRadio determination devices-15 dBμA/m at 10 m distance outside the Nuclear Magnetic Resonance (NMR) device.For enclosed Nuclear Magnetic Resonance (NMR) applications [j].1 July 202217400-600 kHzRadio Frequency Identification (RFID) devices-8 dΒμΑ/m at 10 metres1 July 201485442,2-450,0 kHzNon-specific short-range devices7 dBμA/m at 10 mChannel spacing ≥ 150 HzThis set of usage conditions is only available for person detection and collision avoidance devices.1 January 2020

18456,9-457,1 kHzNon-specific short-range devices7 dBμA/m at 10 mThis set of usage conditions is only available for emergency detections of buried victims and valuable items devices.1 July 201419984-7484 kHzTransport and Traffic Telematics devices9 dΒμΑ/m at 10 mDuty cycle limit: 1 %This set of usage conditions is only available for Eurobalise transmissions in the presence of trains using the 27090-27100 kHz band for telepowering pursuant to the conditions set for band 28.1 July 2014203155-3400 kHzInductive devices13,5 dΒμΑ/m at 10 metres1 July 2014215000-30000 kHz [2]Inductive devices-20 dΒμΑ/m at 10 metres in any bandwidth of 10 kHz. Furthermore the total field strength is -5 dΒμΑ/m at 10 m for systems operating at bandwidths larger than 10 kHz1 July 2014925000-30000 kHzRadio determination devices-5 dBμA/m at 10m distance outside the Nuclear Magnetic Resonance (NMR) device.For enclosed Nuclear Magnetic Resonance (NMR) applications [j].1 July 2022226765-6795 kHzInductive devices42 dΒμΑ/m at 10 metres1 July 2014237300-23000 kHzTransport and Traffic Telematics devices-7 dΒμΑ/m at 10 mAntenna requirements apply [8].This set of usage conditions is only available for Eurobalise transmissions in the presence of trains using the 27090-27100 kHz band for telepowering pursuant to the conditions set for band 28.1 July 2014247400-8800 kHzInductive devices9 dΒμΑ/m at 10 metres1 July 20142510200-11000 kHzInductive devices9 dΒμΑ/m at 10 metres1 July 2014 27a13553-13567 kHzInductive devices42 dΒμΑ/m at 10 metresTransmission mask and antenna requirements for all combined frequency segments apply [8], [9].1 January 202027b13553-13567 kHzRadio Frequency Identification (RFID) devices60 dΒμΑ/m at 10 metresTransmission mask and antenna requirements for all combined frequency segments apply [8], [9].1 July 201427c13553-13567 kHzNon-specific short-range devices10 mW e.r.p.1 July 20142826957-27283 kHzNon-specific short-range devices10 mW e.r.p.1 July 20142926990-27000 kHzNon-specific short-range devices100 mW e.r.p. Duty cycle limit: 0,1 %. Model control devices [d] may operate without duty cycle restrictions. 1 July 20143027040-27050 kHzNon-specific short-range devices100 mW e.r.p. Duty cycle limit: 0,1 %. Model control devices [d] may operate without duty cycle restrictions. 1 July 20143127090-27100 kHzNon-specific short-range devices100 mW e.r.p. Duty cycle limit: 0,1 %. Model control devices [d] may operate without duty cycle restrictions. 1 July 2014 3227140-27150 kHzNon-specific short-range devices100 mW e.r.p. Duty cycle limit: 0,1 %. Model control devices [d] may operate without duty cycle restrictions. 1 July 20143327190-27200 kHzNon-specific short-range devices100 mW e.r.p. Duty cycle limit: 0,1 %. Model control devices [d] may operate without duty cycle restrictions. 1 July 20143430-37,5 MHzActive medical implant devices1 mW e.r.p.Duty cycle limit: 10 %This set of usage conditions is only available to ultra-low power medical membrane implants for blood pressure measurements within the definition of active implantable medical devices.1 July 20149330-130 MHzRadio determination devices-36 dBm e.r.p. outside the Nuclear Magnetic Resonance (NMR) device.For enclosed Nuclear Magnetic Resonance (NMR) applications [j].1 July 20223540,66-40,7 MHzNon-specific short-range devices10 mW e.r.p.1 January 20183687,5-108 MHzHigh duty cycle/continuous transmission devices50 nW e.r.p.Channel spacing up to 200 kHz.This set of usage conditions is only available to wireless audio and multimedia streaming transmitters with analogue frequency modulation (FM).1 July 201437a169,4-169,475 MHzAssistive Listening Devices (ALD)500 mW e.r.p.Channel spacing: max 50 kHz.1 July 2014

37c169,4-169,475 MHzNon-specific short-range devices500 mW e.r.p. Channel spacing: max 50 kHz. Duty cycle limit: 1,0 %. For metering devices [a], the duty cycle limit is 10,0 % 1 July 201438169,4-169,4875 MHzNon-specific short-range devices10 mW e.r.p.Duty cycle limit: 0,1 %.1 January 202039a169,4875-169,5875 MHzAssistive Listening Devices (ALD)500 mW e.r.p.Channel spacing: max 50 kHz.1 July 201439b169,4875-169,5875 MHzNon-specific short-range devices10 mW e.r.p. Duty cycle limit: 0,001 %. Between 00:00h and 06:00h local time a duty cycle limit of 0,1 % may be used. 1 January 202040169,5875-169,8125 MHzNon-specific short-range devices10 mW e.r.p.Duty cycle limit: 0,1 %.1 January 202082173,965-216 MHzAssistive Listening Devices (ALD)10 mW e.r.p. On a tuning range basis [5]. Channel spacing: max 50 kHz. A threshold of 35 dBμV/m is required to ensure the protection of a DAB receiver located at 1,5 m from the ALD device, subject to DAB signal strength measurements taken around the ALD operating site. The ALD device should operate under all circumstances at least 300 kHz away from the channel edge of an occupied DAB channel. Requirements on techniques to access spectrum and mitigate interference apply [7]. 1 January 2018 41401-402 MHzActive medical implant devices25 μW e.r.p. Channel spacing: 25 kHz. Individual transmitters may combine adjacent channels for increased bandwidth up to 100 kHz. Requirements on techniques to access spectrum and mitigate interference apply [7]. Alternatively, a duty cycle limit of 0,1 % may also be used. This set of usage conditions is only available for systems specifically designed for the purpose of providing non-voice digital communications between active implantable medical devices and/or body-worn devices and other devices external to the human body used for transferring non-time critical individual patient-related physiological information.1 July 201442402-405 MHzActive medical implant devices25 μW e.r.p. Channel spacing: 25 kHz. Individual transmitters may combine adjacent channels for increased bandwidth up to 300 kHz. Other techniques to access spectrum or mitigate interference, including bandwidths greater than 300 kHz, can be used provided they ensure compatible operation with the other users and in particular with meteorological radiosondes [7]. This set of usage conditions is only available to active implantable medical devices.1 July 2014 43405-406 MHzActive medical implant devices25 μW e.r.p. Channel spacing: 25 kHz Individual transmitters may combine adjacent channels for increased bandwidth up to 100 kHz. Requirements on techniques to access spectrum and mitigate interference apply [7]. Alternatively a duty cycle limit of 0,1 % may also be used. This set of usage conditions is only available for systems specifically designed for the purpose of providing non-voice digital communications between active implantable medical devices and/or body-worn devices and other devices external to the human body used for transferring non-time critical individual patient-related physiological information.1 July 201486430-440 MHzMedical data acquisition devices-50 dBm/100kHz e.r.p. power density but not exceeding a total power of -40 dBm/10MHz (both limits are intended for measurement outside of the patient’s body)The set of usage conditions is only available for Ultra-Low Power Wireless Medical Capsule Endoscopy (ULP-WMCE) applications [h].1 January 202044a433,05-434,79 MHzNon-specific short-range devices1 mW e.r.p. and -13 dBm/10 kHz power density for bandwidth modulation larger than 250 kHzVoice applications are allowed with advanced mitigation techniques. Other audio and video applications are excluded.1 July 201444b433,05-434,79 MHzNon-specific short-range devices10 mW e.r.p.Duty cycle limit: 10 %1 January 202045c434,04-434,79 MHzNon-specific short-range devices10 mW e.r.p.Duty cycle limit: 100 % subject to channel spacing up to 25 kHz.Voice applications are allowed with advanced mitigation techniques. Other audio and video applications are excluded.1 January 202083446,0-446,2 MHzPMR446500 mW e.r.p.Requirements on techniques to access spectrum and mitigate interference apply [7].1 January 2018

87862-863 MHzNon-specific short-range devices25 mW e.r.p. Duty cycle limit: 0,1 %. Bandwidth: ≤ 350 kHz. 1 January 202046a863-865 MHzNon-specific short-range devices25 mW e.r.p. Requirements on techniques to access spectrum and mitigate interference apply [7]. Alternatively, a duty cycle limit of 0,1 % may also be used. 1 January 201846b863-865 MHzHigh duty cycle/continuous transmission devices10 mW e.r.p.This set of usage conditions is only available to wireless audio and multimedia streaming devices.1 July 201484863-868 MHzWideband data transmission devices25 mW e.r.p. Requirements on techniques to access spectrum and mitigate interference apply [7]. Bandwidth: > 600 kHz and ≤ 1 MHz. Duty cycle: ≤ 10 % for network access points [g] Duty cycle: ≤ 2,8 % otherwise This set of usage conditions is only available for wideband SRDs in data networks [g].1 January 201847865-868 MHzNon-specific short-range devices25 mW e.r.p. Requirements on techniques to access spectrum and mitigate interference apply [7]. Alternatively, a duty cycle limit of 1 % may also be used. 1 January 2020 47a865-868 MHz [6]Radio Frequency Identification (RFID) devices 2 W e.r.p. Interrogator transmissions at 2 W e.r.p. only permitted within the four channels centred at 865,7 MHz, 866,3 MHz, 866,9 MHz and 867,5 MHz RFID interrogator devices placed on the market before the repeal date of EC Decision 2006/804/EC are grandfathered, i.e. they are continuously permitted to be used in line with the provisions set out in EC Decision 2006/804/EC before the repeal date. Requirements on techniques to access spectrum and mitigate interference apply [7]. Bandwidth ≤ 200 kHz 1 January 201847b865-868 MHzNon-specific short-range devices 500 mW e.r.p. Transmissions only permitted within the frequency ranges 865,6-865,8 MHz, 866,2-866,4 MHz, 866,8-867,0 MHz and 867,4-867,6 MHz. Adaptive Power Control (APC) required. Alternatively other mitigation technique with at least an equivalent level of spectrum compatibility. Requirements on techniques to access spectrum and mitigate interference apply [7]. Bandwidth: ≤ 200 kHz Duty cycle: ≤ 10 % for network access points [g] Duty cycle: ≤ 2,5 % otherwise This set of usage conditions is only available for data networks [g].1 January 201848868-868,6 MHzNon-specific short-range devices25 mW e.r.p. Requirements on techniques to access spectrum and mitigate interference apply [7]. Alternatively, a duty cycle limit of 1 % may also be used. 1 January 2020 49868,6-868,7 MHzLow duty cycle/high reliability devices10 mW e.r.p. Channel spacing: 25 kHz. The whole frequency band may also be used as a single channel for high-speed data transmission. Duty cycle limit: 1,0 % This set of usage conditions is only available to alarm systems [e].1 July 201450868,7-869,2 MHzNon-specific short-range devices25 mW e.r.p. Requirements on techniques to access spectrum and mitigate interference apply [7]. Alternatively a duty cycle limit of 0,1 % may also be used. 1 January 202051869,2-869,25 MHzLow duty cycle/high reliability devices10 mW e.r.p.Channel spacing: 25 kHz. Duty cycle limit: 0,1 %This set of usage conditions is only available to social alarm devices [b].1 July 201452869,25-869,3 MHzLow duty cycle/high reliability devices10 mW e.r.p.Channel spacing: 25 kHz. Duty cycle limit: 0,1 %This set of usage conditions is only available to alarm systems [e].1 July 201453869,3-869,4 MHzLow duty cycle/high reliability devices10 mW e.r.p.Channel spacing: 25 kHz. Duty cycle limit: 1,0 %This set of usage conditions is only available to alarm systems [e].1 July 201454869,4-869,65 MHzNon-specific short-range devices500 mW e.r.p.

Requirements on techniques to access spectrum and mitigate interference apply [7]. Alternatively, a Duty cycle limit of 10 % may also be used. 1 January 202055869,65-869,7 MHzLow duty cycle/high reliability devices25 mW e.r.p.Channel spacing: 25 kHz Duty cycle limit: 10 %This set of usage conditions is only available to alarm systems [e].1 July 2014 56a869,7-870 MHzNon-specific short-range devices5 mW e.r.p.Voice applications are allowed with advanced mitigation techniques. Other audio and video applications are excluded.1 July 201456b869,7-870 MHzNon-specific short-range devices25 mW e.r.p. Requirements on techniques to access spectrum and mitigate interference apply [7]. Alternatively, a duty cycle limit of 1 % may also be used. 1 January 202057a2400-2483,5 MHzNon-specific short-range devices10 mW equivalent isotropic radiated power (e.i.r.p.)1 July 201457b2400-2483,5 MHzRadio determination devices25 mW e.i.r.p.1 July 201457c2400-2483,5 MHzWideband data transmission devices100 mW e.i.r.p. and 100 mW/100 kHz e.i.r.p. density applies when frequency hopping modulation is used, 10 mW/MHz e.i.r.p. density applies when other types of modulation are usedRequirements on techniques to access spectrum and mitigate interference apply [7].1 July 2014582446-2454 MHzRadio Frequency Identification (RFID) devices500 mW e.i.r.p.Requirements on techniques to access spectrum and mitigate interference apply [7].1 July 2014592483,5-2500 MHzActive medical implant devices10 mW e.i.r.p. Requirements on techniques to access spectrum and mitigate interference apply [7]. Channel spacing: 1 MHz. The whole frequency band may also be used dynamically as a single channel for high-speed data transmissions. In addition, a duty cycle limit of 10 % applies. This set of usage conditions is only available to active implantable medical devices. Peripheral master units are for indoor use only. 1 July 2014 59a2483,5-2500 MHzMedical data acquisition devices1 mW e.i.r.p. Requirements on techniques to access spectrum and mitigate interference apply [7]. Modulation Bandwidth: ≤ 3 MHz. In addition, a duty cycle: ≤ 10 % applies. The set of usage conditions is only available for medical body area network system (MBANS) [f] for indoor use within healthcare facilities1 January 201859b2483,5-2500 MHzMedical data acquisition devices10 mW e.i.r.p. Requirements on techniques to access spectrum and mitigate interference apply [7]. Modulation Bandwidth: ≤ 3 MHz. In addition, a duty cycle: ≤ 2 % applies The set of usage conditions is only available for medical body area network system (MBANS) [f] for indoor use within the patient’s home1 January 2018604500-7000 MHzRadio determination devices24 dBm e.i.r.p. [3]Requirements on techniques to access spectrum and mitigate interference apply [7].This set of usage conditions is only available to Tank Level Probing Radar [c].1 July 2014615725-5875 MHzNon-specific short-range devices25 mW e.i.r.p.1 July 2014625795-5815 MHzTransport and Traffic Telematics devices2 W e.i.r.p.Requirements on techniques to access spectrum and mitigate interference apply [7].This set of usage conditions applies only to road tolling applications and smart tachograph, weight and dimension applications [i].1 January 2020885855-5865 MHzTransport and Traffic Telematics devices33 dBm e.i.r.p., 23 dBm/MHz e.i.r.p. density and a Transmit Power Control (TPC) range of 30 dBRequirements on techniques to access spectrum and mitigate interference apply [7].This set of usage conditions is only available to vehicle-to-vehicle, vehicle-to-infrastructure and infrastructure-to-vehicle systems.1 January 2020

895865-5875 MHzTransport and Traffic Telematics devices33 dBm e.i.r.p., 23 dBm/MHz e.i.r.p. density and a Transmit Power Control (TPC) range of 30 dBRequirements on techniques to access spectrum and mitigate interference apply [7].This set of usage conditions is only available to vehicle-to-vehicle, vehicle-to-infrastructure and infrastructure-to-vehicle systems.1 January 2020636000-8500 MHzRadio determination devices7 dBm/50 MHz peak e.i.r.p. and -33 dBm/MHz mean e.i.r.p.Automatic power control and antenna requirements as well as requirements on techniques to access spectrum and mitigate interference apply [7], [8] [10]. This set of usage conditions is only available to Level Probing Radar. Established exclusion zones around radio astronomy sites shall be obeyed. 1 July 2014648500-10600 MHzRadio determination devices30 dBm e.i.r.p. [3]Requirements on techniques to access spectrum and mitigate interference apply [7].This set of usage conditions is only available to Tank Level Probing Radar [c].1 July 20146517,1-17,3 GHzRadio determination devices26 dBm e.i.r.p.Requirements on techniques to access spectrum and mitigate interference apply [7].This set of usage conditions is only available to ground-based systems.1 July 20146624,05-24,075 GHzTransport and Traffic Telematics devices100 mW e.i.r.p.1 July 20146724,05-26,5 GHzRadio determination devices26 dBm/50 MHz peak e.i.r.p. and -14 dBm/MHz mean e.i.r.p.Automatic power control and antenna requirements as well as requirements on techniques to access spectrum and mitigate interference apply [7]. [8], [10] This set of usage conditions is only available to Level Probing Radar. Established exclusion zones around radio astronomy sites shall be obeyed. 1 July 20146824,05-27 GHzRadio determination devices43 dBm e.i.r.p. [3]Requirements on techniques to access spectrum and mitigate interference apply [7].This set of usage conditions is only available to Tank Level Probing Radar [c].1 July 2014 69a24,075-24,15 GHzTransport and Traffic Telematics devices100 mW e.i.r.p.Requirements on techniques to access spectrum and mitigate interference apply [7].This set of usage conditions is only available to ground-based vehicle radars.1 July 201469b24,075-24,15 GHzTransport and Traffic Telematics devices0,1 mW e.i.r.p.1 July 201470a24,15-24,25 GHzNon-specific short-range devices100 mW e.i.r.p.1 July 201470b24,15-24,25 GHzTransport and Traffic Telematics devices100 mW e.i.r.p.1 July 201474a57-64 GHzNon-specific short-range devices100 mW e.i.r.p. and a maximum transmit power of 10 dBm1 January 202074b57-64 GHzRadio determination devices43 dBm e.i.r.p. [3]Requirements on techniques to access spectrum and mitigate interference apply [7].This set of usage conditions is only available to Tank Level Probing Radar [c].1 July 201474c57-64 GHzRadio determination devices35 dBm/50 MHz peak e.i.r.p. and -2 dBm/MHz mean e.i.r.p.Automatic power control and antenna requirements as well as requirements on techniques to access spectrum and mitigate interference apply [7] [8], [10].This set of usage conditions is only available to Level Probing Radar.1 July 20147557-71 GHzWideband data transmission devices40 dBm e.i.r.p. and 23 dBm/MHz e.i.r.p. densityRequirements on techniques to access spectrum and mitigate interference apply [7].Fixed outdoor installations are excluded.1 January 202075a57-71 GHzWideband data transmission devices40 dBm e.i.r.p., 23 dBm/MHz e.i.r.p. density and maximum transmit power of 27 dBm at the antenna port or portsRequirements on techniques to access spectrum and mitigate interference apply [7].1 January 202075b57-71 GHzWideband data transmission devices55 dBm e.i.r.p., 38 dBm/MHz e.i.r.p. density and a transmit antenna gain ≥ 30 dBiRequirements on techniques to access spectrum and mitigate interference apply [7].This set of usage conditions is only available to fixed outdoor installations.1 January 2020

7661-61,5 GHzNon-specific short-range devices100 mW e.i.r.p.1 July 20147763,72-65,88 GHzTransport and Traffic Telematics devices40 dBm e.i.r.p.TTT devices placed on the market before the 1 January 2020 are grandfathered, i.e. they are permitted to use the previous frequency range 63-64 GHz, and otherwise the same conditions apply.This set of usage conditions is only available to vehicle-to-vehicle, vehicle-to-infrastructure and infrastructure-to-vehicle systems.1 January 202078a75-85 GHzRadio determination devices34dBm/50 MHz peak e.i.r.p. and -3 dBm/MHz mean e.i.r.p.Automatic power control and antenna requirements as well as requirements on techniques to access spectrum and mitigate interference apply [7], [8], [10]. This set of usage conditions is only available to Level Probing Radar. Established exclusion zones around radio astronomy sites shall be obeyed. 1 July 201478b75-85 GHzRadio determination devices43 dBm e.i.r.p. [3]Requirements on techniques to access spectrum and mitigate interference apply [7].This set of usage conditions is only available to Tank Level Probing Radar [c].1 July 201479a76-77 GHzTransport and Traffic Telematics devices55 dBm peak e.i.r.p. and 50 dBm mean e.i.r.p. and 23,5 dBm mean e.i.r.p. for pulse radars Requirements on techniques to access spectrum and mitigate interference apply [7]. Fixed transportation infrastructure radars have to be of a scanning nature in order to limit the illumination time and ensure a minimum silent time to achieve coexistence with automotive radar systems. This set of usage conditions is only available to ground-based vehicle and infrastructure systems.1 June 2020 79b76-77 GHzTransport and Traffic Telematics devices 30 dBm peak e.i.r.p. and 3 dBm/MHz average power spectral density Duty cycle limit: ≤ 56 %/sThis set of usage conditions is only available to obstacle detection systems for rotorcraft use [4].1 January 201880a122-122,25 GHzNon-specific short-range devices 10 dBm/250MHz e.i.r.p. and -48 dBm/MHz at 30° elevation 1 January 201880b122,25-123 GHzNon-specific short-range devices100 mW e.i.r.p.1 January 201881244-246 GHzNon-specific short-range devices100 mW e.i.r.p.1 July 2014 Applications and devices referred to in Table 2: [a] Metering devices means radio devices that are part of bidirectional radio communications systems which allow remote monitoring, measuring and transmission of data in smart grid infrastructures, such as electricity, gas and water. [b] Social alarm devices means radio communications systems that allow reliable communication for a person in distress in a confined area to initiate a call for assistance. Typical uses of social alarm are to assist elderly or disabled people. [c] Tank Level Probing Radar (TLPR) means a specific type of radiodetermination application, which is used for tank level measurements and is installed in metallic or reinforced concrete tanks, or similar structures made of material with comparable attenuation characteristics. The purpose of the tank is to contain a substance.

[d] Model control devices means a specific kind of telecommand and telemetry radio equipment that is used to remotely control the movement of models (principally miniature representations of vehicles) in the air, on land or over or under the water surface. [e] An alarm system is a device which uses radio communication support for indicating an alert to a system or a person, as a main functionality, at a distant location when a problem or a specific situation occurs. Radio alarms include social alarms and alarms for security and safety. [f] Medical Body Area Network Systems (MBANSs) are used for medical data acquisition and are intended for low-power wireless networking of a plurality of body-worn sensors and/or actuators as well as of a hub device placed on/around the human body. [g] A network access point in a data network is a fixed terrestrial short-range device that acts as a connection point for the other short-range devices in the data network to service platforms located outside of that data network. The term data network refers to several short-range devices, including the network access point, as network components and to the wireless connections between them. [h] Wireless medical capsule endoscopy is used for medical data acquisition designed for use in medical doctor-patient scenarios with the aim of acquiring images of human digestive tract. [i] Smart tachograph, weight and dimension applications are defined as remote enforcement of the tachograph in Appendix 14 of Commission Implementing Regulation 2016/799 Commission Implementing Regulation (EU) 2016/799 of 18 March 2016 implementing Regulation (EU) No 165/2014 of the European Parliament and of the Council laying down the requirements for the construction, testing, installation, operation and repair of tachographs and their components (OJ L 139, 26.5.2016, p. 1). and for the weights and dimensions enforcement in Article 10d of Directive 2015/719 Directive (EU) 2015/719 of the European Parliament and of the Council of 29 April 2015 amending Council Directive 96/53/EC laying down for certain road vehicles circulating within the Community the maximum authorised dimensions in national and international traffic and the maximum authorised weights in international traffic (OJ L 115, 6.5.2015, p. 1). . [j] Enclosed NMR sensors are devices where the material/object under investigation is put inside the enclosure of the NMR device. NMR techniques use nuclear magnetic resonance excitation and magnetic field strength response of a material/object under test to get information about material properties based on resonance frequency responses of isotopes of atoms. Nuclear magnetic resonance imaging and magnetic resonance tomography systems are not included in this scope. Other technical requirements and clarifications referred to in Table 2: [1] In band 20 higher field strengths and additional usage restrictions apply for inductive applications. [2] In bands 22, 24, 25, 27a, and 28 higher field strengths and additional usage restrictions apply for inductive applications.

[3] The power limit applies inside a closed tank and corresponds to a spectral density of -41,3 dBm/MHz e.i.r.p. outside a 500 litre test tank. [4] Member States can specify exclusion zones or equivalent measures in which the obstacle detection application for rotorcraft use shall not be used for the protection of the radioastronomy service or other national use. Rotorcraft is defined as EASA CS-27 and CS-29 (resp. JAR-27 and JAR-29 for former certifications). [5] Devices shall implement the whole frequency range on a tuning range basis. [6] RFID tags respond at a very low power level (-20 dBm e.r.p.) in a frequency range around the RFID interrogator channels and shall comply with the essential requirements of Directive 2014/53/EU. [7] Techniques to access spectrum and mitigate interference that provide an appropriate level of performance to comply with the essential requirements of Directive 2014/53/EU shall be used. If relevant techniques are described in harmonised standards or parts thereof the references of which have been published in the Official Journal of the European Union under Directive 2014/53/EU, performance at least equivalent to these techniques shall be ensured. [8] Antenna requirements that provide an appropriate level of performance to comply with the essential requirements of Directive 2014/53/EU shall be used. If relevant restrictions are described in harmonised standards or parts thereof the references of which have been published in the Official Journal of the European Union under Directive 2014/53/EU, performance at least equivalent to these restrictions shall be ensured. [9] Transmission mask that provides an appropriate level of performance to comply with the essential requirements of Directive 2014/53/EU shall be used. If relevant restrictions are described in harmonised standards or parts thereof the references of which have been published in the Official Journal of the European Union under Directive 2014/53/EU, performance at least equivalent to these restrictions shall be ensured. [10] Automatic power control that provides an appropriate level of performance to comply with the essential requirements of Directive 2014/53/EU shall be used. If relevant restrictions are described in harmonised standards or parts thereof the references of which have been published in the Official Journal of the European Union under Directive 2014/53/EU, performance at least equivalent to these restrictions shall be ensured.