Commission Implementing Regulation (EU) 2023/1041 of 24 May 2023 granting a Union authorisation for the biocidal product TWP 094 in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the CouncilText with EEA relevance.

Commission Implementing Regulation (EU) 2023/1041 of 24 May 2023 granting a Union authorisation for the biocidal product TWP 094 in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (Text with EEA relevance) THE EUROPEAN COMMISSION, Having regard to the Treaty on the Functioning of the European Union, Having regard to Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012 concerning the making available on the market and use of biocidal products OJ L 167, 27.6.2012, p. 1. , and in particular Article 44(5), first subparagraph, thereof, Whereas: (1) On 12 November 2018, TROY CHEMICAL COMPANY BV submitted to the European Chemicals Agency (the Agency) an application in accordance with Article 43(1) of Regulation (EU) No 528/2012 for a Union authorisation of a biocidal product named TWP 094 of product-type 8, as described in Annex V to that Regulation, providing written confirmation that the competent authority of Denmark had agreed to evaluate the application. The application was recorded under case number BC-QN044827-14 in the Register for Biocidal Products. (2) TWP 094 contains 3-Iodo-2-propynyl butylcarbamate (IPBC) as the active substance, included in the Union list of approved active substances referred to in Article 9(2) of Regulation (EU) No 528/2012 for product-type 8. (3) On 7 January 2022, the evaluating competent authority submitted, in accordance with Article 44(1) of Regulation (EU) No 528/2012, an assessment report and the conclusions of its evaluation to the Agency. (4) On 5 July 2022, the Agency submitted to the Commission its opinion ECHA opinion of 16 June 2022 on the Union authorisation of TWP 094 (ECHA/BPC/348/2022), https://echa.europa.eu/opinions-on-union-authorisation , the draft summary of the biocidal product characteristics (SPC) of TWP 094 and the final assessment report on the biocidal product, in accordance with Article 44(3) of Regulation (EU) No 528/2012. (5) The opinion concludes that TWP 094 is a biocidal product within the meaning of Article 3(1), point (a), of Regulation (EU) No 528/2012, that it is eligible for Union authorisation in accordance with Article 42(1) of that Regulation and that, subject to compliance with the draft SPC, it meets the conditions laid down in Article 19(1) of that Regulation. (6) On 18 August 2022, the Agency transmitted to the Commission the draft SPC in all the official languages of the Union in accordance with Article 44(4) of Regulation (EU) No 528/2012. (7) The Commission concurs with the opinion of the Agency and considers it therefore appropriate to grant a Union authorisation for TWP 094. (8) In its opinion, the Agency states that the authorisation holder is to complete a long-term storage test at ambient temperature for TWP 094 and provide a test on persistent foaming and a test on the degree of dissolution and dilution stability for the soluble concentrate formulation type of the product as a condition in the authorisation. The results of the long-term storage test should confirm the shelf life of the biocidal product of one year granted based on an accelerated storage stability test and the submitted interim results of a long-term storage stability test at ambient temperature. The information to be provided on persistent foaming and degree of dissolution and dilution stability should confirm the technical properties of the product for the formulation type soluble concentrate of the product.

(9) The Commission agrees with the opinion of the Agency and considers that the submission of the results of the test and the information for the soluble concentrate formulation type should be a condition relating to the making available on the market and use of the biocidal product TWP 094 pursuant to Article 22(1) of Regulation (EU) No 528/2012. The Commission also considers that the fact that data is to be provided after the authorisation is granted does not affect the conclusion on the fulfilment of the condition under Article 19(1), point (d), of that Regulation based on existing data. (10) The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Biocidal Products, HAS ADOPTED THIS REGULATION:

Article 1

A Union authorisation with authorisation number EU-0028968-0000 is hereby granted to TROY CHEMICAL COMPANY BV for the making available on the market and use of the biocidal product TWP 094 subject to compliance with the terms and conditions set out in Annex I and in accordance with the summary of the biocidal product characteristics set out in Annex II. The Union authorisation is valid from 19 June 2023 to 31 May 2033.

Article 2

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union. This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 24 May 2023. For the Commission The President Ursula von der Leyen

Annex

ANNEX I TERMS AND CONDITIONS (EU-0028968-0000) The authorisation holder shall conduct a long-term storage test at ambient temperature for the product TWP 094 to confirm the shelf life of the biocidal product of 12 months. The study must include a test of degree of dissolution and dilution stability after storage for 12 months at ambient temperature. If the degradation exceeds 10%, efficacy data and information on the degradation products and their impact on risk assessment is required and shall be included. The authorisation holder shall provide a test of persistent foaming and a test on degree of dissolution and dilution stability to confirm the soluble concentrate formulation type of the product TWP 094. By 19 June 2024 the authorisation holder shall submit the results of the test and the information to the Agency.

Annex

ANNEX II Summary of product characteristics for a biocidal product TWP 094 Product type 8 - Wood preservatives (Preservatives) Authorisation number: EU-0028968-0000 R4BP asset number: EU-0028968-0000

1. ADMINISTRATIVE INFORMATION 1.1. Trade name(s) of the product Trade name(s) TWP 094 StoPrim Protect W 22 Aqua Holz-Imprägnier-Grund Gjøco Impregnering Aqua Omnia Preservative Voima Aqua Base Aqua IG-16 Aqua Holz-Imprägnierung Induline SW-906 Sadolin QD Wood Preserver WB Holz-Öl Imprägniergrund WX Imprägniergrund W21000 Imprägniergrund W219 Protox Woodprotect B3 Grundingsolie WP GVK-Pohjuste Plus Pinja Base Grundolja Villa Protect

Primex Olja plus Primex Olja Valtti Plus Primer Gori Professional Træimprægnering Vandig Sigmalife WB Primer GORI Transparent grunder træværk 11 IM151A profilan-prevent pro impralan-Grund I100 pro impralan-Grund G300 pro impralan-Grund G400 pro Rhenocryl pro-TL 30 EU Rhenocryl pro-TL 45 EU Holzschutzgrund / sous-couche de protection du bois Impregnační základ Impregnačný základ Houtimpregneer Grund pentru protecția lemnului Holzschutzgrundierung Osmo Træimprægnering WR Aqua 4019 Osmo Träimpregnering WR Aqua 4019 Osmo Treimpregnering WR Aqua 4019 Osmo Puunsuojapohjuste WR Aqua 4019 Osmo Color Träimpregnering WR Aqua 4019 Osmo Imprégnation pour le bois WR aqua 4019 Osmo Holz-Imprägnierung WR Aqua 4019 Osmo Impregnace dřeva WR Aqua 4019 Osmo Impregnácia dreva WR Aqua 4019 Osmo Impregnazione per legno WR Aqua 4019 Osmo Impregnálás WR Aqua 4019 Osmo Impregnat do drewna WR Aqua 4019 Osmo Houtimpregneer WR Aqua 4019 Osmo Imprégnation pour le bois WR aqua 4019 Osmo Holz-Imprägnierung WR Aqua 4019 Osmo Houtimpregneer WR Aqua 4019 Osmo Impregnarea lemnului WR Aqua 4019 Osmo WR Base Coat Aqua 4019 Osmo Color Puiduimmutus WR Aqua 4019 Osmo Impregnēšana kokam WR Aqua 4019 Osmo Impregnavimas WR Aqua 4019 Osmo WR Base Coat Aqua 4019 Osmo Impregnación para madera WR Aqua 4019 Osmo Impregnação para madeira WR Aqua 4019 Osmo Impregnacija lesa WR Aqua 4019 Osmo Impregnacija drva WR Aqua 4019 Flügger 01 Wood Tex Grund-olie Flügger 01 Wood Tex Grund-olja Flügger 01 Wood Tex Grunn-olje Flügger 01 Wood Tex Grundieröl Flügger 01 Wood Tex Primaire Bois Hydrofuge Flügger 01 Wood Tex Olej-gruntujacy Flügger 01 Wood Tex Flügger 01 Wood Tex Grundolie Holzschutzgrund WOODEX AQUA BASE + AM0572/00 Hydroplus protettivo per legno 458-0004/2 Idro Ceopren protettivo per legno HI2550 Linea Blu protettivo per Legno AM0572/00 Hydroplus Wood protection 458-0004/2 IDRO CEOPREN Wood protection HI2550 Linea Blu Wood Protection AA1960 Laqvin Seal 37647 Ronseal Multi-Purpose Wood Treatment 37648 Ronseal Multi-Purpose Wood Treatment MasqueWoodPro 10 CETOL WP 5000-02 BAUFIX Holz-Imprägnierung YM---M103/----- 674840 HF PROTECTIVE PRIMER W Grundolja V Ronseal Wood Preserver Ronseal Trade Wood Preserver Screwfix Wood Preserver B&Q Wood Preserver Good Home Wood Preserver Sherwin Williams Wood Preserver Ronseal Fence Life Wood Preserver Ronseal Shed & Fence Preserver Castorama Traitement Bois Extérieur Brico Depot Traitement Bois Extérieur Good Home Traitement Bois Extérieur Altax Traitement Bois Extérieur Ronseal Traitement Bois Extérieur Valspar Traitement Bois Extérieur Valspar Pro Traitement Bois Extérieur Sherwin Williams Traitement Bois Extérieur Luxens Traitement Bois Extérieur Castorama Impregnat do drewna Good Home Impregnat do drewna Altax Impregnat do drewna Valspar Impregnat do drewna Valspar Pro Impregnat do drewna Sherwin Williams Impregnat do drewna Luxens Impregnat do drewna Castorama Conservant pentru lemn Good Home Conservant pentru lemn Altax pentru lemn Valspar pentru lemn Valspar Pro pentru lemn

Sherwin Williams pentru lemn 1.2. Authorisation holder Name and address of the authorisation holderNameTROY CHEMICAL COMPANY BVAddressPoortweg 4C, 2612PA Delft NetherlandsAuthorisation numberEU-0028968-0000R4BP asset numberEU-0028968-0000Date of the authorisation19 June 2023Expiry date of the authorisation31 May 2033 1.3. Manufacturer(s) of the product Name of manufacturerTroy Chemical Company BVAddress of manufacturerPoortweg 4C, 2612 PA Delft NetherlandsLocation of manufacturing sites Westelijke Randweg 9, 4791 RT Klundert Netherlands Industriepark 23, 56593 Horhausen Germany Geschwister-Scholl-Straße 127, 39218 Schönebeck/Elbe Germany Mecklenburger Str. 229, 23568 Lübeck Germany Halchtersche Str. 33, 38304 Wolfenbüttel Germany Am Nordturm 5, 46562 Voerde Germany Am Alten Galgen 14, 56410 Montabaur Germany Name of manufacturerTikkurila OyjAddress of manufacturerKuninkaalantie 1, FI-01301 Vantaa FinlandLocation of manufacturing sites Kuninkaalantie 1, FI-01301 Vantaa Finland uL.Mościckiego 23, 39-200 DĘBICA Poland Name of manufacturerAkzo Nobel Industrial Coatings ABAddress of manufacturerStaffanstorpsvägen 50, 20517 Malmö SwedenLocation of manufacturing sitesStaffanstorpsvägen 50, 20517 Malmö Sweden Name of manufacturerSchulz Farben- und Lackfabrik GmbHAddress of manufacturerAn der Altnah 10, 55450 Langenlonsheim GermanyLocation of manufacturing sitesAn der Altnah 10, 55450 Langenlonsheim GermanyName of manufacturerRemmers GmbHAddress of manufacturerBernhard-Remmers-Straße 13, 49624 Löningen GermanyLocation of manufacturing sites Bernhard-Remmers-Straße 13, 49624 Löningen Germany Füllenbruchstr. 13, 32120 Hiddenhausen Germany Name of manufacturerRemmers Industrielacke GmbHAddress of manufacturerFüllenbruchstr. 13, 32120 Hiddenhausen GermanyLocation of manufacturing sitesFüllenbruchstr. 13, 32120 Hiddenhausen GermanyName of manufacturerTeknos A/SAddress of manufacturerIndustrivej 16, DK-6580 Vamdrup DenmarkLocation of manufacturing sitesIndustrivej 16, DK-6580 Vamdrup DenmarkName of manufacturerSherwin WilliamsAddress of manufacturerThorncliffe Park Estate, Thorncliffe Rd, Chapeltown, S35 2YP Sheffield United KingdomLocation of manufacturing sites Thorncliffe Park Estate, Thorncliffe Rd, Chapeltown,, S35 2YP Sheffield United Kingdom Kopanińska 7, 60-119 Brodziszewo Poland Name of manufacturerSherwin-Williams Italy S.r.l.Address of manufacturerVia Del Fiffo 12, 40065 Pianoro (BO) ItalyLocation of manufacturing sitesVia Del Fiffo 12, 40065 Pianoro (BO) ItalyName of manufacturerSherwin-Williams Sweden ABAddress of manufacturerBellö, 570 32 Hjältevad SwedenLocation of manufacturing sitesBellö, 570 32 Hjältevad SwedenName of manufacturerPPG Industries (Dyrup A/S)Address of manufacturerGladsaxevej 300, 2860 Gladsaxe DenmarkLocation of manufacturing sitesGladsaxevej 300, 2860 Gladsaxe Denmark 1.4. Manufacturer(s) of the active substance(s) Active substance3-iodo-2-propynylbutylcarbamate (IPBC)Name of manufacturerTroy CorporationAddress of manufacturer8 Vreeland Road, Florham Park, NJ 07105 New Jersey United StatesLocation of manufacturing sitesOne Avenue L, NJ 07105 Newark United StatesActive substance3-iodo-2-propynylbutylcarbamate (IPBC)Name of manufacturerTroy Chemical Company BVAddress of manufacturerPoortweg 4C, 2612 PA Delft NetherlandsLocation of manufacturing sitesIndustriepark 23, 56593 Horhausen Germany

1. PRODUCT COMPOSITION AND FORMULATION 2.1. Qualitative and quantitative information on the composition of the product Common nameIUPAC nameFunctionCAS numberEC numberContent (%)3-iodo-2-propynylbutylcarbamate (IPBC)Active Substance55406-53-6259-627-50,75 2.2. Type of formulation Any other liquid (AL) and Soluble concentrate (SL)
2. HAZARD AND PRECAUTIONARY STATEMENTS Hazard statements Harmful to aquatic life with long lasting effects. Contains 3-iodo-2-propynyl butylcarbamate (IPBC). May produce an allergic reaction. Precautionary statements Avoid release to the environment. Dispose of contents in accordance with local / national regulations. Dispose of container in accordance with local / national regulations.
3. AUTHORISED USE(S) 4.1. Use description Table 1. Use # 1 – Brushing and rolling (general public, professional) Product typePT08 - Wood preservatives (Preservatives)Where relevant, an exact description of the authorised useFungicide. Target organism(s) (including development stage) Common name: Blue stain fungi Development stage: Scientific name: Basidiomycetes: Common name: Brown rot fungi Development stage: Field(s) of use Indoor Outdoor Softwood Preventative treatment Use class 2 as described in EN standard 335:2013 (situation in which the wood or wood-based product is under cover and not exposed to the weather (particularly rain and wind-driven rain) but where occasional, but not persistent, wetting can occur. Use class 3 as described in EN standard 335:2013 (situation in which the wood or wood-based product is above ground and exposed to the weather (particularly rain) See section 6 for the full titles of the EN standards. Application method(s) Method: brushing and rolling Detailed description: Superficial treatment Application rate(s) and frequency Application Rate: 100 ml/m2 (against blue stain fungi); 150 - 160 ml/m2 (against wood-rotting fungi) Dilution (%): - Ready-to-use product Number and timing of application: 1 application Category(ies) of users Professional General public (non-professional) Pack sizes and packaging material Can (high-density polyethylene) HDPE: 0,375 l, 0,75 l, 1,0 l, 2,5 l, 5,0 l For professional use only: Can HDPE: 10 l, 20 l, 25 l 4.1.1. Use-specific instructions for use Do not dilute (ready-to-use). Apply the product to the wood with a brush or roller and let dry for approximately 24 hours. Cleaning of the tools can be performed using mild soap and water. Use of a topcoat is required. The topcoat cannot contain a film- or wood preservative. The topcoat should be maintained. The product protects the wood surface against blue stain fungi on wood that is minimum moderately to slightly durable to fungi according to EN 350:2016: Durability Class (DC) 3-4. See section 6 for the full title of the EN standards. 4.1.2. Use-specific risk mitigation measures Do not use/apply directly on or near food, feed or drinks, or on surfaces or utensils likely to be in direct contact with food, feed, drinks and livestock/pets.

Do not apply near bodies of surface water. During product application (to timbers) and whilst surfaces are drying, do not contaminate the environment. All losses of the product have to be contained by covering the ground (e.g. by tarpaulin) and disposed of in a safe way. 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general direction for use. 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general direction for use. 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general direction for use. 4.2. Use description Table 2. Use # 2 – Manual dipping (professional) Product typePT08 - Wood preservatives (Preservatives)Where relevant, an exact description of the authorised useFungicide.Target organism(s) (including development stage) Common name: Blue stain fungi Development stage: Scientific name: Basidiomycetes: Common name: Brown rot fungi Development stage: Field(s) of use Indoor Softwood Preventative treatment Use class 2 Use class 3 Application method(s) Method: manual dipping Detailed description: Superficial treatment Application rate(s) and frequency Application Rate: 100 ml/m2 (against blue stain fungi); 150 - 160 ml/m2 (against wood-rotting fungi) Dilution (%): - Ready-to-use product Number and timing of application: 1 application Category(ies) of usersProfessionalPack sizes and packaging materialCan HDPE: 0,375 l, 0,75 l, 1,0 l, 2,5 l, 5,0 l, 10 l, 20 l, 25 l 4.2.1. Use-specific instructions for use Do not dilute (ready-to-use). Drying time: Dry to handle and ready for topcoat: approximately 24 hours. Cleaning of tools: Use water and mild soap. Use of a topcoat is required. The topcoat cannot contain a film- or wood preservative. The topcoat should be maintained. The product protects the wood surface against blue stain fungi on wood that is minimum moderately to slightly durable to fungi according to EN 350:2016: Durability Class (DC) 3-4. See section 6 for the full title of the EN standards. 4.2.2. Use-specific risk mitigation measures Wear protective chemical resistant gloves during product handling phase classified under the European Standard EN 374 or equivalent. Glove material to be specified by the authorisation holder within product information. Wear a protective coverall (type 6, EN 13034 or equivalent). This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full titles of the EN standards and legislation. Application by manual dipping shall be performed for a maximum of 30 minutes per day. Do not use/apply directly on or near food, feed or drinks, or on surfaces or utensils likely to be in direct contact with food, feed, drinks and livestock/pets. During product application (to timbers) and whilst surfaces are drying, do not contaminate the environment. All losses of the product have to be contained by covering the ground (e.g. by tarpaulin) and disposed of in a safe way.

Freshly treated timber must be stored after treatment under shelter or on a hard, impermeable surface to prevent direct losses to soil and water. Any losses should be collected for reuse or disposal. 4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general direction for use. 4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general direction for use. 4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general direction for use. 4.3. Use description Table 3. Use # 3 – Automated dipping, automated spraying, flow coating/deluging (industrial) Product typePT08 - Wood preservatives (Preservatives)Where relevant, an exact description of the authorised useFungicide.Target organism(s) (including development stage) Common name: Blue stain fungi Development stage: Scientific name: Basidiomycetes: Common name: Brown rot fungi Development stage: Field(s) of use Indoor Softwood Preventative treatment Use class 2 Use class 3 Application method(s) Method: automated dipping, automated spraying, flow coating/deluging Detailed description: Superficial treatment. Similar to flow coating/deluging, automated spraying is assumed to be an essentially fully enclosed process, whereby operator exposure occurs mainly by handling wet treated wood. Application rate(s) and frequency Application Rate: 100 ml/m2 (against blue stain fungi); 150 - 160 ml/m2 (against wood-rotting fungi) Dilution (%): - Ready-to-use product Number and timing of application: 1 application Category(ies) of usersIndustrialPack sizes and packaging materialCan/ intermediate bulk container (IBC) HDPE: 120 l, 220 l, 1000 l 4.3.1. Use-specific instructions for use Do not dilute (ready-to-use). Drying time:until dry to touch. Use of a topcoat is required. The topcoat cannot contain a film- or wood preservative. The topcoat shall be maintained. The product protects the wood surface against blue stain fungi on wood that is minimum moderately to slightly durable to fungi according to EN 350:2016: Durability Class (DC) 3-4. See section 6 for the full title of the EN standards. 4.3.2. Use-specific risk mitigation measures The product must only be loaded into industrial application equipment via a fully-automated pumping/transfer system. Wear protective chemical resistant gloves during product handling phase classified under the European Standard EN 374 or equivalent. Glove material to be specified by the authorisation holder within product information. Wear a protective coverall (type 6, EN 13034 or equivalent). This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full titles of EN standards and legislation. The product must only be used in fully automated dipping processes where all steps in the treatment and drying process are mechanised and no manual handling takes place, including when the treated articles are transported through the dip tank to draining/drying and storage (if not already surface dry before moving to storage). Where appropriate, the wooden articles to be treated must be fully secured (e.g. via tension belts or clamping devices) prior to treatment and during the dipping process, and must not be manually handled until after the treated articles are surface dry.

Freshly treated timber shall be stored after treatment under shelter or on impermeable hard standing, or both, to prevent direct losses to soil, sewer and water. Any losses of the product shall be collected for reuse or disposal. 4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general direction for use. 4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general direction for use. 4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general direction for use. 4.4. Use description Table 4. Use # 4 – Double vacuum/low pressure process (industrial) Product typePT08 - Wood preservatives (Preservatives)Where relevant, an exact description of the authorised useFungicide.Target organism(s) (including development stage) Scientific name: Basidiomycetes: Common name: Brown rot fungi Development stage: Field(s) of use Indoor Softwood Preventative treatment Use class 2 Use class 3 Application method(s) Method: Double vacuum/low pressure process Detailed description: Penetrative treatment. Application rate(s) and frequency Application Rate: 74.6 - 79.5 kg/m3 Dilution (%): 10% in-use solution (1 part product: 9 parts water) Number and timing of application: 1 application Category(ies) of usersIndustrialPack sizes and packaging materialCan/IBC HDPE: 120 l, 220 l, 1000 l 4.4.1. Use-specific instructions for use Drying time: until dry to touch. 4.4.2. Use-specific risk mitigation measures The product must only be loaded into industrial application equipment via a fully-automated pumping/transfer system. Wear protective chemical resistant gloves during product handling phase classified under the European Standard EN 374 or equivalent. Glove material to be specified by the authorisation holder within product information. Wear a protective coverall (type 6, EN 13034 or equivalent). This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for full titles of the EN standards and legislation. Freshly treated timber shall be stored after treatment under shelter or on impermeable hard standing, or both, to prevent direct losses to soil, sewer or water. Any losses of the product shall be collected for reuse or disposal. 4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general direction for use. 4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general direction for use. 4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general direction for use. 5. GENERAL DIRECTIONS FOR USE Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses.

5.1. Instructions for use Comply with the instructions for use. Do not use product on wood or wooden structures intended for use indoors, except for internal surfaces of external window frames and of external doors/door frames. The temperature must be above 5°C and relative humidity below 80% during application and drying. Stir product before use. Avoid contact with skin and eyes. Wash hands and face after application and use of the product, and before eating, drinking or smoking. 5.2. Risk mitigation measures Do not use on wood which may come in direct contact with food, feed and livestock. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment IF SWALLOWED: If symptoms occur call a POISON CENTRE or a doctor. IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTRE or a doctor. IF IN EYES: If symptoms occur rinse with water. Remove contact lenses, if present and easy to do. Call a POISON CENTRE or a doctor. IF INHALED: If symptoms occur call a POISON CENTRE or a doctor. When seeking medical advice, have the product container or label at hand. 5.4. Instructions for safe disposal of the product and its packaging This product and its container must be disposed of safely as hazardous waste. Any product collected during application that is not reused must be disposed of safely as hazardous waste. Dispose of packaging and of unused product in accordance with local regulations. If required, consult a professional waste operator or local authority. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Keep out of reach of children and non-target animals/pets. Do not store near food, drink and animal feeding stuff. Shelf life: 12 months. Store below 35°C. Store in a cool, dry, well-ventilated place. Protect from frost. Protect from light. Opened containers must be carefully resealed and kept upright to prevent leakage. 6. OTHER INFORMATION Regarding Use 1 and Use 2: Professionals and/or trained professionals if required by national legislation. Full titles of EN standards and legislation mentioned in section 4.1.1, 4.2.1, 4.3.1, 4.2.2, 4.3.2 and 4.4.2: EN 335:2013 - Durability of wood and wood-based products - Use classes: definitions, application to solid wood and wood-based products EN 350:2016, Durability of wood and wood-based products - Testing and classification of the durability to biological agents of wood and wood-based materials EN 374 – Protective gloves against dangerous chemicals and micro-organisms. Part 1: terminology and performance requirements for chemical risks. EN 13034 - Protective clothing against liquid chemicals. Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment). Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) (OJ L 131, 5.5.1998, p. 11).