Council Regulation (EU) 2023/2880of 19 December 2023amending Regulation (EU) 2021/2283 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products

Council Regulation (EU) 2023/2880 of 19 December 2023 amending Regulation (EU) 2021/2283 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products THE COUNCIL OF THE EUROPEAN UNION, Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof, Having regard to the proposal from the European Commission, Whereas: (1) In order to ensure a sufficient and uninterrupted supply of certain agricultural and industrial products which are produced in insufficient quantities in the Union and thereby avoid any disturbances on the market for those products, autonomous tariff quotas of the Union (quotas) were opened by Council Regulation (EU) 2021/2283 Council Regulation (EU) 2021/2283 of 20 December 2021 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products, and repealing Regulation (EU) No 1388/2013 (OJ L 458, 22.12.2021, p. 33). . Within those quotas, products can be imported into the Union at reduced or zero duty rates. (2) As it is in the Union’s interest to ensure an adequate supply of a certain industrial product, and having regard to the fact that an identical, equivalent or substitute product is not produced in sufficient quantities within the Union, it is necessary to open a new quota with order number 09.2558 at zero duty rate for an appropriate quantity of that product. (3) As is it in the Union’s interest to ensure an adequate supply of certain industrial products the volumes of quotas with order numbers 09.2828 and 09.2855 should be increased. (4) As the Union production capacity for certain industrial products has been increased the volumes of quotas with order numbers 09.2561, 09.2575, 09.2583, 09.2682, 09.2742 and 09.2857 should be decreased. (5) For the quota with order number 09.2562 the quota period should be extended and the quota volume should be adapted on a yearly basis, as the quota was opened for a period of 6 months only and it is still in the Union's interest to maintain it. (6) As it is no longer in the Union's interest to maintain the quota with order number 09.2681, that quota should be closed with effect from 1 January 2024. (7) Taking into account the amendments to be made and for the sake of clarity, the Annex to Regulation (EU) 2021/2283 should be replaced. (8) Regulation (EU) 2021/2283 should therefore be amended accordingly. (9) In order to avoid any interruption in the application of the quota scheme and to comply with the guidelines set out in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the quotas for the products concerned should apply from 1 January 2024. This Regulation should therefore enter into force as a matter of urgency, HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) 2021/2283 is replaced by the text set out in the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union. It shall apply from 1 January 2024. This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 19 December 2023. For the Council The President T. Ribera Rodríguez

Annex

ANNEX .

Annex

ANNEX Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013. However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings. Order numberCN codeTARICDescriptionQuota periodQuota volumeQuota duty rate09.2849ex0710806910Mushrooms of the species Auricularia polytricha (uncooked or cooked by steaming or boiling), frozen, for the manufacture of prepared meals1.1.–31.12.700 tonnes0 %09.2664ex2008603930Sweet cherries containing added spirit, with a sugar content of not more than 9 % by weight, of a diameter of not more than 19,9 mm, with stones, for use in chocolate products1.1.–31.12.1000 tonnes10 %09.2925 ex23099031 ex23099031 ex23099096 ex23099096 41 49 41 49 Feed additive, consisting on dry weight basis of: 68 % or more, but not more than 80 % of L-lysine sulphate, and not more than 32 % of other components such as carbohydrates and other amino acids 1.1.–31.12.100000 tonnes0 %09.2913 ex24011035 ex24011070 ex24011095 ex24011095 ex24011095 ex24012035 ex24012070 ex24012095 ex24012095 ex24012095 91 10 11 21 91 91 10 11 21 91 Natural unmanufactured tobacco, whether or not cut in regular size, having a custom value of not less than EUR 450 per 100 kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 240210001.1.–31.12.3000 tonnes0 %09.282827122090Paraffin wax containing by weight less than 0,75 % of oil1.1.–31.12.180000 tonnes0 %09.2600ex2712903910Slack wax (CAS RN 64742-61-6)1.1.–31.12.100000 tonnes0 %09.2578ex2811198050Sulphamidic acid (CAS RN 5329-14-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of the anti-caking agent silicon dioxide (CAS RN 112926-00-8)1.1.–31.12.27000 tonnes0 %09.2928ex2811220040Silica filler in the form of granules, with a purity by weight of 97 % or more of silicon dioxide1.1.–31.12.1700 tonnes0 %09.2806ex2825904030Tungsten trioxide, including blue tungsten oxide (CAS RN 1314-35-8 or CAS RN 39318-18-8)1.1.–31.12.12000 tonnes0 % 09.2819ex2833250030Copper hydroxide sulfate (Cu4(OH)6(SO4)), hydrate (CAS RN 1252-76-3) with a purity by weight of 98 % or more1.1.–31.12.240000 kilograms0 %09.2872ex2833298040Caesium sulphate (CAS RN 10294-54-9) in solid form or as aqueous solution containing by weight 48 % or more but not more than 52 % of caesium sulphate1.1.–31.12.400 tonnes0 %09.2567ex2903220010Trichloroethylene (CAS RN 79-01-6) with a purity by weight of 99 % or more1.1.–31.12.11885000 kilograms0 %09.2837ex2903793020Bromochloromethane (CAS RN 74-97-5)1.1.–31.12.600 tonnes0 %09.2933ex29039980301,3-Dichlorobenzene (CAS RN 541-73-1)1.1.–31.12.2600 tonnes0 %09.2700ex2905120010Propan-1-ol (propyl alcohol) (CAS RN 71-23-8)1.1.–31.12.15000 tonnes0 %09.2830ex2906190040Cyclopropylmethanol (CAS RN 2516-33-8)1.1.–31.12.20 tonnes0 %09.2851ex2907120010O-cresol (CAS RN 95-48-7) having a purity of not less than 98,5 % by weight1.1.–31.12.20000 tonnes0 %09.2704ex29094980202,2,2',2'-Tetrakis(hydroxymethyl)–3,3'-oxydipropan-1-ol (CAS RN 126-58-9)1.1.–31.12.500 tonnes0 %09.2565ex2914199070Calcium acetylacetonate (CAS RN 19372-44-2) with a purity by weight of 95 % or more1.1.–31.12.400 tonnes0 %09.2852ex2914290060Cyclopropyl methyl ketone (CAS RN 765-43-5)1.1.–31.12.300 tonnes0 %09.2638ex2915210010Acetic acid (CAS RN 64-19-7) of a purity by weight of 99 % or more1.1.–31.12.1000000 tonnes0 %09.267929153200Vinyl acetate (CAS RN 108-05-4)1.1.–31.12.450000 tonnes0 %09.2728ex2915907085Ethyl trifluoroacetate (CAS RN 383-63-1)1.1.–31.12.400 tonnes0 %09.2665ex2916199530Potassium (E,E)-hexa–2,4-dienoate (CAS RN 24634-61-5)1.1.–31.12.8250 tonnes0 %09.2684ex29163990282,5-Dimethylphenylacetyl chloride (CAS RN 55312-97-5)1.1.–31.12.700 tonnes0 %09.2599ex2917110040Diethyl oxalate (CAS RN 95-92-1)1.1.–31.12.500 tonnes0 %09.2769ex2917139010Dimethyl sebacate (CAS RN 106-79-6)1.1.–31.12.1000 tonnes0 %09.2634ex2917198040Dodecanedioic acid (CAS RN 693-23-2), of a purity by weight of more than 98,5 %1.1.–31.12.8000 tonnes0 %

09.2808ex2918220010O-acetylsalicylic acid (CAS RN 50-78-2)1.1.–31.12.120 tonnes0 %09.2646ex2918290075 Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate (CAS RN 2082-79-3) with: a sieve passing fraction at a mesh width of 500 μm of more than 99 % by weight, and a melting point of 49 °C or more, but not more than 54 °C, for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates) 1.1.–31.12.380 tonnes0 %09.2647ex2918290080 Pentaerythritol tetrakis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS RN 6683-19-8) with: a sieve passing fraction at a mesh width of 250 μm of more than 75 % by weight and at a mesh width of 500 μm of more than 99 % by weight, and a melting point of 110 °C or more, but not more than 125 °C, for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates) 1.1.–31.12.140 tonnes0 %09.2975ex2918300010Benzophenone–3,3’,4,4’-tetracarboxylic dianhydride (CAS RN 2421-28-5)1.1.–31.12.1000 tonnes0 %09.2598ex2921199975Octadecylamine (CAS RN 124-30-1)1.1.–31.12.400 tonnes0 %09.2649ex2921290060Bis(2-dimethylaminoethyl)(methyl)amine (CAS RN 3030-47-5)1.1.–31.12.1700 tonnes0 %09.2682ex2921410010Aniline (CAS RN 62-53-3) with a purity by weight of 99 % or more1.1.–31.12.150000 tonnes0 %09.2617ex29214200894-Fluoro-N-(1-methylethyl)benzeneamine (CAS RN 70441-63-3)1.1.–31.12.500 tonnes0 %09.2602ex2921511910O-phenylenediamine (CAS RN 95-54-5)1.1.–31.12.1800 tonnes0 %09.2921ex29221900222-(dimethylamino)ethyl acrylate (CAS RN 2439-35-2) with a purity by weight of 99 % or more1.1.–31.12.14000 tonnes0 %09.2563ex2922410020L-Lysine hydrochloride (CAS RN 657-27-2) or an aqueous solution of L-lysine (CAS RN 56-87-1), containing by weight 50 % or more of L-lysine1.1.–31.12.300000 tonnes0 % 09.2575ex29239000873-Chloro-2-hydroxypropyl)trimethylammonium chloride (CAS RN 3327-22-8), in the form of an aqueous solution containing by weight 65 % or more but not more than 71 % 3-chloro-2-hydroxypropyl)trimethylammonium chloride1.1.–31.12.9500 tonnes0 %09.2922ex2923900088Aqueous solution containing by weight 78 % or more but not more than 82 % of [2-(acryloyloxy)ethyl]trimethylammonium chloride (CAS RN 44992-01-0)1.1.–31.12.10000 tonnes0 %09.2854ex29241900853-Iodoprop-2-yn-1-yl butylcarbamate (CAS RN 55406-53-6)1.1.–31.12.450 tonnes0 %09.2874ex2924297087Paracetamol (INN) (CAS RN 103-90-2)1.1.–31.12.20000 tonnes0 %09.2742ex2926100010Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of chapter 55 and heading 68151.1.–31.12.30000 tonnes0 %09.2583ex2926100030Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of headings 2921, 2924, 3903, 3906, 3908, 3911 and 40021.1.–31.12.20000 tonnes0 %09.2856ex29269070842-Nitro-4(trifluoromethyl)benzonitrile (CAS RN 778-94-9)1.1.–31.12.900 tonnes0 %09.2685ex2929900030Nitroguanidine (CAS RN 556-88-7)1.1.–31.12.6500 tonnes0 %09.2597ex2930909894Bis[3-(triethoxysilyl)propyl]disulphide (CAS RN 56706-10-6)1.1.–31.12.6000 tonnes0 %09.2596ex29309098962-Chloro-4-(methylsulphonyl)-3-((2,2,2-trifluoroethoxy)methyl) benzoic acid (CAS RN 120100-77-8)1.1.–31.12.300 tonnes0 %09.2580ex2931900075Hexadecyltrimethoxysilane (CAS RN 16415-12-6) with a purity by weight of at least 95 %, for use in the manufacture of polyethylene1.1.–31.12.165 tonnes0 %09.2842293212002-Furaldehyde (furfuraldehyde)1.1.–31.12.10000 tonnes0 %09.2696ex2932209025Decan-5-olide (CAS RN 705-86-2)1.1.–31.12.6000 kilograms0 %09.2697ex2932209030Dodecan-5-olide (CAS RN 713-95-1)1.1.–31.12.6000 kilograms0 %09.2812ex2932209077Hexan-6-olide (CAS RN 502-44-3)1.1.–31.12.4000 tonnes0 %09.285829329300Piperonal (CAS RN 120-57-0)1.1.–31.12.220 tonnes0 %09.2839ex29333999092-(2-Pyridyl)ethanol (CAS RN 103-74-2) with a purity by weight of 99 % or more1.1.–31.12.700 tonnes0 %

09.2860ex29336980301,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine (CAS RN 15875-13-5)1.1.–31.12.600 tonnes0 %09.2566ex29339980051,4,7,10-Tetraazacyclododecane (CAS RN 294-90-6) with a purity by weight of 96 % or more1.1.–31.12.60 tonnes0 %09.2658ex29339980735-(Acetoacetylamino)benzimidazolone (CAS RN 26576-46-5)1.1.–31.12.400 tonnes0 %09.2593ex29349990675-Chlorothiophene-2-carboxylic acid (CAS RN 24065-33-6)1.1.–31.12.45000 kilograms0 %09.2675ex29359090794-[[(2-Methoxybenzoyl)amino]sulfonyl]benzoyl chloride (CAS RN 816431-72-8)1.1.–31.12.1000 tonnes0 %09.2945ex2940000020D-Xylose (CAS RN 58-86-6)1.1.–31.12.400 tonnes0 %09.2686ex3204110075Colourant C.I. Disperse Yellow 54 (CAS RN 7576-65-0) and preparations based thereon with a colourant C.I. Disperse Yellow 54 content of 99 % or more by weight1.1.–31.12.250 tonnes0 %09.2676ex3204170014Preparations based on Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) with a content thereof of 60 % or more but less than 85 % by weight1.1.–31.12.50 tonnes0 %09.2698ex3204170030Colourant C.I. Pigment Red 4 (CAS RN 2814-77-9) and preparations based thereon with a colourant C.I. Pigment Red 4 content of 60 % or more by weight1.1.–31.12.150 tonnes0 %09.2659ex3802900019Soda flux calcinated diatomaceous earth1.1.–31.12.35000 tonnes0 %09.2908ex3804000010Sodium lignosulphonate (CAS RN 8061-51-6)1.1.–31.12.40000 tonnes0 %09.288938051090Sulphate turpentine1.1.–31.12.25000 tonnes0 %09.2935ex3806100010Rosin and resin acids obtained from fresh oleoresins1.1.–31.12.280000 tonnes0 %09.2832ex3808929040Preparation containing 38 % or more but not more than 50 % by weight of pyrithione zinc (INN) (CAS RN 13463-41-7) in an aqueous dispersion1.1.–31.12.500 tonnes0 % 09.2923ex3808942040 Aqueous solution containing by weight: 10,0 % or more but not more than 11,3 % of 5-chloro-2-methyl-2H-isothiazol-3-one, 3,0 % or more but not more than 4,1 % of 2-methyl-2H-isothiazol-3-one, a combined concentration of isothiazolones (CAS RN 55965-84-9) of 13,0 % or more but not more than 15,4 %, 18 % or more but not more than 22 % of nitrates, calculated as sodium nitrate, and 5 % or more but not more than 8 % of chlorides, calculated as sodium chloride 1.1.–31.12.3000 tonnes0 %09.2926ex3811210031 Additive consisting essentially of: Phosphorodithioic acid, mixed O,O-bis (isobutyl and pentyl) esters, zinc salts (CAS RN 68457-79-4), 8 % or more by weight but not more than 15 % by weight of mineral oil, for use in the manufacture of blends of additives for lubricating oils 1.1.–31.12.700 tonnes0 %09.2876ex3811290057 Additives consisting of reaction products of diphenylamine and branched nonenes with: more than 20 % but not more than 50 % by weight 4-monononyldiphenylamine, and more than 50 % but not more than 80 % by weight 4,4'-dinonyldiphenylamine, a total percentage of 2,4-dinonyldiphenylamine and 2,4'-dinonyldiphenylamine of not more than 15 % by weight, used for the manufacture of lubricating oils 1.1.–31.12.900 tonnes0 %09.2927ex3811290080

Additives containing: more than 70 % by weight of 2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole (CAS RN 89347-09-1), and more than 15 % by weight of 5-(tert-nonyldithio)- 1,3,4-thiadiazole-2(3H)-thione (CAS RN 97503-12-3), for use in the manufacture of lubricating oils 1.1.–31.12.500 tonnes0 %09.2814ex3815909076Catalyst consisting of titanium dioxide and tungsten trioxide1.1.–31.12.3000 tonnes0 % 09.2644ex3824999277 Preparation containing by weight: 55 % or more but not more than 78 % of dimethyl gluterate (CAS RN 1119-40-0), 10 % or more but not more than 30 % of dimethyl adipate (CAS RN 627-93-0), and not more than 35 % of dimethyl succinate (CAS RN 106-65-0) 1.1.–31.12.10000 tonnes0 %09.2907ex3824999367 Mixture of phytosterols, in the form of powder, containing by weight: 75 % or more of sterols, not more than 25 % of stanols, for use in the manufacture of stanols/sterols or stanol/sterol esters 1.1.–31.12.2500 tonnes0 %09.2568ex3824999691 Mixture, in pellet form, containing by weight: 49 % or more but not more than 50 % of bis[3-(triethoxysilyl)propyl] polysulphides (CAS RN 211519-85-6), and 50 % or more but not more than 51 % of carbon black (CAS RN 1333-86-4), of which 75 % by weight or more pass through a sieve with an aperture of 0,60 mm, but not more than 10 % pass through a sieve with an aperture of 0,25 mm (as determined by the ASTM D1511 method) 1.1.–31.12.1500 tonnes0 %09.2820ex3827900010 Mixtures containing by weight: 60 % or more but not more than 90 % of 2-chloropropene (CAS RN 557-98-2), 8 % or more but not more than 14 % of (Z)-1-chloropropene (CAS RN 16136-84-8), 5 % or more but not more than 23 % of 2-chloropropane (CAS RN 75-29-6), not more than 6 % of 3-chloropropene (CAS RN 107-05-1), and not more than 1 % of ethyl chloride (CAS RN 75-00-3) 1.1.–31.12.6000 tonnes0 %09.2671ex3905999081 Poly(vinyl butyral)(CAS RN 63148-65-2): containing by weight 17,5 % or more, but not more than 20 % of hydroxyl groups, and with a median particle size (D50) of more than 0,6 mm 1.1.–31.12.12500 tonnes0 % 09.2846ex3907400025Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of not less than 98,5 % by weight, in the form of pellets or granules, with a luminous transmittance of not less than 88,5 %, measured using a test sample with a thickness of 4 mm at a wavelength of λ = 400 nm (according to ISO 13468-2)1.1.–31.12.2000 tonnes0 %09.2585ex3907998070Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol1.1.–31.12.60000 tonnes2 %09.2855ex3910000010Liquid poly(methylhydrosiloxane) with terminal trimethylsilyl groups (CAS RN 63148-57-2) with a purity by weight of 99,9 % or more1.1.–31.12.1000 tonnes0 %09.2931ex3911901110Poly(oxy–1,4-phenylenesulphonyl–1,4-phenyleneoxy–1,4-phenyleneisopropylidene–1,4-phenylene) (CAS RN 25135-51-7 and CAS RN 25154-01-2), in one of the forms mentioned in note 6(b) to this chapter containing by weight not more than 20 % of additives1.1.–31.12.6300 tonnes0 %09.2723ex3911901935Poly(oxy–1,4-phenylenesulfonyl–1,4-phenyleneoxy–4,4'-biphenylene) (CAS RNs 25608-64-4 and 25839-81-0) containing by weight not more than 20 % of additives1.1.–31.12.5000 tonnes0 %09.2816ex3912110020Cellulose acetate flakes1.1.–31.12.75000 tonnes0 %09.2561ex3912398560Hypromellose (INN) (CAS RN 9004-65-3), for use in the manufacturing of food supplements or pharmaceuticals1.1.–31.12.2750 tonnes0 %09.2573ex3913100020

Sodium alginate extracted from brown seaweed (CAS RN 9005-38-3), with a loss on drying of not more than 15 % by weight (4h at 105 °C), a water-insoluble fraction of not more than 2 % by weight, calculated on the dry weight 1.1.–31.12.2000 tonnes0 % 09.2641ex3913900087 Sodium hyaluronate, non sterile, with: a weight average molecular weight (Mw) of not more than 900000, an endotoxin level of not more than 0,008 Endotoxin units (EU)/mg, an ethanol content of not more than 1 % by weight, an isopropanol content of not more than 0,5 % by weight 1.1.–31.12.300 kilograms0 %09.2661ex3920510050 Sheets of polymethylmethacrylate conforming to standards: EN 4364 (MIL-P-5425E) and DTD5592A, or EN 4365 (MIL-P-8184) and DTD5592A 1.1.–31.12.100 tonnes0 %09.2645ex3921140020Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) x 100 cm (± 10 cm) x 40 cm (± 5 cm)1.1.–31.12.1700 tonnes0 %09.2572 ex52052600 ex52052700 10 10 Raw white single cotton yarn of combed fibres, with an average fibre length of 36,5 mm or more, produced through the compact ring spinning process with pneumatic compression, with a tear strength of 26,5 cN/tex or more (according to ISO 2062:2009, at a speed of 5000 mm/min) 1.1.–31.12.50000 tonnes0 %09.2848ex5505101010Waste of synthetic fibres (including noils, yarn waste, and garnetted stock) of nylon or other polyamides (PA6 and PA66)1.1.–31.12.10000 tonnes0 %09.2721ex5906999020 Woven and laminated rubberised textile fabric with the following characteristics: with three layers, one outer layer consists of acrylic fabric, the other outer layer consists of polyester fabric, the middle layer consists of chlorobutyl rubber, the middle layer has a weight of 452 g/m2 or more but not more than 569 g/m2, the textile fabric has a total weight of 952 g/m2 or more but not more than 1159 g/m2, and the textile fabric has a total thickness of 0,8 mm or more but not more than 4 mm, used for the manufacture of the retractable roof of motor vehicles 1.1.–31.12.375000 square meters0 % 09.2628ex7019660010Glass web woven from glass fibre coated in plastic, of a weight of 120 g/m2(± 10 g/m2), of a type used in rolling insect screens with fixed frames1.1.–31.12.3000000 square meters0 %09.2652 ex74091100 ex74101100 30 40 Refined copper foil and strips, electrolytically manufactured, with a thickness of 0,015 mm or more1.1.–31.12.1020 tonnes0 %09.2662ex7410210055 Plates: consisting of at least one layer of fibreglass fabric impregnated with epoxide resin, covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, with a comparative tracking index (CTI) of 600 or more 1.1.–31.12.80000 square meters0 %09.2835ex7604291030Aluminium alloy rods with a diameter of 300,1 mm or more, but not more than 533,4 mm1.1.–31.12.1000 tonnes0 %09.2736

ex76071190 ex76071190 ex76071190 ex76071190 75 77 78 79 Aluminium and magnesium alloy strip or foil: of an alloy conforming to standards 5182-H19 or 5052-H19, in rolls with an outside diameter of minimum 1250 mm but not more than 1350 mm, of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm, of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, having a camber tolerance of not more than 0,4 mm/750 mm, of a flatness measurement: I-unit ±4, having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, and of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %, for use in the manufacture of slats for blinds 1.1.–31.12.600 tonnes0 % 09.272281041100Unwrought magnesium, containing at least 99,8 % by weight of magnesium1.1.–31.12.120000 tonnes0 %09.2840ex8104300020 Magnesium powder: of purity by weight of 98 % or more, but not more than 99,5 %, and with a particle size of 0,2 mm or more but not more than 0,8 mm 1.1.–31.12.2000 tonnes0 %09.2629ex8302490091Aluminium telescopic handle for use in the manufacture of luggage1.1.–31.12.1500000 pieces0 %09.2720ex8413910050 Pump head for two cylinder high pressure pump made of forged steel, with: milled threaded fittings with a diameter of 10 mm or more but not more than 36,8 mm, and drilled fuel channels with a diameter of 3,5 mm or more but not more than 10 mm, of a kind used in diesel injection systems 1.1.–31.12.65000 pieces0 %09.2569ex8414900080 Turbocharger wheel housing of cast aluminium alloy or cast iron: with a heat resistance up to 400 °C, with a hole of 30 mm or more but not more than 300 mm for the insertion of the compressor wheel, for use in the automotive industry 1.1.–31.12.4000000 pieces0 %09.2570ex8482919010 Rollers with a logarithmic profile and a diameter of 25 mm or more but not more than 70 mm or balls with a diameter of 30 mm but not more than 100 mm, made of 100Cr6 steel or 100CrMnSi6-4 steel (ISO 3290), with a deviation of 0,5 mm or less as determined with the FBHmethod for use in wind turbine industry 1.1.–31.12.600000 pieces0 %09.2562ex8482990030 Brass cages with the following characteristics: continuously or centrifugally cast, turned, containing by weight 35 % or more, but not more than 38 % of zinc, containing by weight 0,75 % or more, but not more than 1,25 % of lead, containing by weight 1,0 % or more, but not more than 1,4 % of aluminium, and with a tensile strength of 415 Pa or more, of a kind used for the manufacture of ball bearings 1.1-31.12.550000 pieces0 % 09.2857ex8482990060 Inner or outer rings made of steel, not hardened or not grinded, outer ring with internal raceway(s), inner ring with external raceway(s), with external diameters of: 14 mm or more but not more than 77 mm for the inner ring, 26 mm or more but not more than 101 mm for the outer ring, for use in the manufacture of bearings 1.1.–30.6.9000000 kilograms0 %09.2924ex8501310080 Electronic actuator consisting of:

a DC motor having a power of less than 600 W, for usage with a supply voltage of 12 V to 48 V, with motor connection (plug-in connection), with contactless position sensor, built in a rectangular housing of a width of less than 100 mm and a length of less than 150 mm, with reduction gear and lever attached to the motor drive shaft or in a cylindrical housing of a length off less than 150mm and with a diameter of less than 100 mm, with threads integrated into the rotor of the motor for linear movement of the integrated control rod 1.1.–31.12.650000 pieces0 %09.2763 ex85014020 ex85014080 65 60 Electric AC motor, single-phase, whether or not with commutator with a nominal output of 180 W or more, with an input power of 150 W or more but not more than 2700 W, with an external diameter of more than 120 mm (± 0,2 mm) but not more than 135 mm (± 0,2 mm), with a rated speed of more than 10000 rpm but not more than 50000 rpm, whether or not equipped with air-inducting ventilator, whether or not with mechanical device (pinion, screws, gear connection etc.) on the shaft, for use in the manufacture of domestic appliances 1.1.–31.12.2000000 pieces0 % 09.2574ex8537109173 Multifunctional device (instrument cluster) with: curved TFT LCD display (radius 750 mm) with touch-sensitive surfaces, microprocessors and memory chips, acoustic module and loudspeaker, connections for CAN, 3 x LIN bus, LVDS and Ethernet, for operating various functions (e.g. chassis, lighting) and for situation-related display of vehicle and navigation data (e.g. speed, odometer, charge level of the drive battery), for use in the manufacture of passenger cars powered solely by an electric motor covered by HS subheading 870380 1.1.–31.12.66900 pieces0 %09.2558ex8543709087 An electronic sound generator, creating an analog signal for a device producing the sound of an engine, containing: a printed circuit board with a microprocessor and a sound amplifier, a connector, a plastic housing, with or without a metal holder, for use in the manufacture of goods of Chapter 87 1.1.–31.12.30000 pieces0 %09.2910ex8708999775Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 871.1.–31.12.200000 pieces0 %09.2668 ex87149110 ex87149110 ex87149110 21 31 75 Bicycle frame, constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including electric bicycles)1.1.–31.12.600000 pieces0 %09.2564 ex87149110 ex87149110 ex87149110 25 35 77 Frame, constructed from aluminium or aluminium and carbon fibres and artificial resin, for the use in the manufacture of bicycles (including electric bicycles)1.1.–31.12.9600000 pieces0 %09.2579 ex90292031 ex90299000 40 40 Clustered instrument panel with: stepping motors, analog pointers and dials, or without microprocessor control board, or without LED indicators or LCD display, showing at least: speed, engine revolutions,