Commission Implementing Decision (EU) 2024/367of 23 January 2024laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council by establishing the European positive lists of starting substances, compositions and constituents authorised for use in the manufacture of materials or products that come into contact with water intended for human consumption(Text with EEA relevance)

Commission Implementing Decision (EU) 2024/367 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council by establishing the European positive lists of starting substances, compositions and constituents authorised for use in the manufacture of materials or products that come into contact with water intended for human consumption (Text with EEA relevance) THE EUROPEAN COMMISSION, Having regard to the Treaty on the Functioning of the European Union, Having regard to Directive (EU) 2020/2184 of the European Parliament and of the Council of 16 December 2020 on the quality of water intended for human consumption OJ L 435, 23.12.2020, p. 1. , and in particular Article 11(2), point (b), thereof, Whereas: (1) Directive (EU) 2020/2184 provides for the establishment of European positive lists of substances, compositions and constituents for each type of materials, namely organic, cementitious, metallic, enamels, ceramic or other inorganic materials, which are authorised for use in the manufacture of materials or products that come into contact with water intended for human consumption and fall within the scope of Article 11 of that Directive. These European positive lists should include, where appropriate, conditions for the use of substances, compositions and constituents and migration limits, which are to be determined on the basis of the methodologies adopted pursuant to Article 11(2), point (a), of Directive (EU) 2020/2184. Such conditions of use may include a purity criterion, a condition on the physico-chemical characteristics of the starting substance, composition or constituent, a condition on its manufacturing process or on the manufacturing process of final materials, their use for certain products, the use of these products, or further testing requirement. Sacrificial anodes, membranes and ions exchange resins are water treatment chemicals and/or filter media and are covered by Article 12 of Directive (EU) 2020/2184, therefore they are excluded from the scope of Article 11 of that Directive. (2) Article 11(3) of the Directive sets out that lists established by the Commission pursuant to Article 5 of Regulation (EC) No 1935/2004 of the European Parliament and of the Council Regulation (EC) No 1935/2004 of the European Parliament and of the Council of 27 October 2004 on materials and articles intended to come into contact with food and repealing Directives 80/590/EEC and 89/109/EEC (OJ L 338, 13.11.2004, p. 4). should be used as a source to establish the first European positive lists under the Directive. The list established in Annex I to Commission Regulation (EU) No 10/2011 Commission Regulation (EU) No 10/2011 of 14 January 2011 on plastic materials and articles intended to come into contact with food (OJ L 12, 15.1.2011, p. 1). is one of these lists. However, substances included on this list have only been assessed for their use in plastic food contact materials in accordance with Regulation (EU) No 10/2011, subject to specific conditions of use. Moreover, the European Food Safety Authority has indicated that a significant number of the substances should be prioritised for re-evaluation as no specific migration limit was established when they were authorised for use in plastic food contact materials

EFSA CEP Panel (EFSA Panel on Food Contact Materials, Enzymes andProcessing Aids), Silano V, et. al., 2020. Scientific Opinion on the review and priority setting for substances that are listed without a specific migration limit in Table 1 of Annex 1 of Regulation 10/2011on plastic materials and articles intended to come into contact with food. EFSA Journal 2020;18(6):6124,104 pp. https://doi.org/10.2903/j.efsa.2020.6124. . The inclusion of such substances in Annex I to Regulation (EU) No 10/2011 nevertheless provides a much higher level of certainty over their safety in contact with drinking water when used in the manufacture of drinking water products, than would be the case for unlisted substances. Therefore it is appropriate to add substances originating from lists established by the Commission pursuant to Article 5 of Regulation (EC) No 1935/2004 to the first European list under Article 11(3) of the Directive, provided these additions are only used as a starting point for further conformity assessment in accordance with Article 11(8), and provided their re-evaluation by the expiry date set out in the first European positive list takes account of all the conditions and drinking water materials in which they may be used. (3) Where applicable, the migration limit, i.e. the maximum tolerable concentration at the tap, should be based on the parametric value set out in Part B or C of Annex I to Directive (EU) 2020/2184 or the specific migration limit set out in Annexes I and II to Regulation (EU) No 10/2011. This should, however, be done after application of an allocation factor to account for the proportion of potential exposure from materials in contact with water intended for human consumption derived from the information provided by Member States. (4) Annex I to Regulation (EU) No 10/2011 provides further detail on conditions of use of authorised substances, as well FCM substance reference numbers used in risk assessments. To facilitate further conformity assessment of substances that are added to the first European positive list on the basis of Annex I to Regulation (EU) No 10/2011, it is appropriate to add their FCM reference numbers in the first European positive lists. (5) The expiry dates included in the first European positive lists follow the recommendation from European Chemicals Agency (ECHA) in particular on the basis of the hazardous properties of the starting substance, composition or constituent, the quality of the underlying risk assessments, the extent to which those risk assessments are up-to-date and the need for a staggered review of these entries. (6) Some entries in the European positive lists should be allowed to be combined, extended to related starting substances, compositions and constituents or extended for use in different material types than the one for which they have been authorised when such combination or extension has no impact on the protection of human health to ensure the proportionality and efficiency of the process.

(7) Based on notifications from Member States, the first European positive lists include group entries covering multiple starting substances, compositions or constituents. Assessing the safety of each individual starting substance, composition or constituent separately is more appropriate to assess the safety of the groups; however, at the time of adopting the first European positive list it was not possible to identify the starting substances or organic cementitious constituents in those groups. Therefore, group entries should progressively be replaced in the European positive lists by the individual starting substances, compositions or constituents in the group and the economic operator should only be able to rely on such group entries for the first European positive list if it is able to demonstrate the safety of its starting substance, composition or constituent. (8) In order to ensure an orderly and efficient application process, an entry may be renewed provided that notification of intention and, subsequently, an application is submitted to ECHA within a set deadline. (9) Member States’ national provisions with regard to starting substances, compositions and constituents and their national positive lists were notified to ECHA by 12 July 2021. In order to allow national authorities sufficient time to prepare for the application of the European positive lists, the application of this act will start from 31 December 2026. The national systems are to apply until 31 December 2026. In addition, transitional measures should be provided for substances, compositions and constituents approved in the national systems from 13 July 2021 to 31 December 2026, provided that in accordance with Part B of Annex I to Directive (EU) 2020/2184, these substances do not exceed the parametric value of 5 μg/l for lead (Pb) at the tap. (10) The measures provided for in this Decision are in accordance with the opinion of the Committee referred to in Article 22(1) of Directive (EU) 2020/2184, HAS ADOPTED THIS DECISION:

Article 1

European positive lists This Decision establishes the following: (a) the European positive list of starting substances for organic materials and groups of starting substances for organic materials as set out in Tables 1 and 2 of Annex I respectively; (b) the European positive list of compositions of metallic materials and groups of compositions for metallic materials as set out in Tables 1 and 2 of Annex II respectively; (c) the European positive list of organic constituents of cementitious materials and groups of organic constituents for cementitious materials as set out in Tables 2 and 3 of Annex III respectively; (d) the European positive list of compositions of enamels, ceramic and other inorganic materials as set out in Table 1 of Annex IV.

Article 2

Definitions For the purpose of this Decision, the following definitions shall apply: (1) material means a solid, semi-solid or liquid that is used for the manufacturing of a product that is:

(a) an organic composition prepared from one or more starting substances; or (b) a cementitious composition prepared from one or more constituents; or (c) a metallic, enamel, ceramic or other inorganic composition; (2) monomer means a substance which is capable of forming covalent bonds with a sequence of additional like or unlike molecules under the conditions of the relevant polymer-forming reaction used for the particular process; (3) organic material means a material that mainly consist of carbon-based substances; (4) monomer unit means the reacted form of a monomer substance in a polymer; (5) polymer means a substance consisting of molecules that are characterised by the sequence of one or more types of monomer units ant that are distributed over a range of molecular weights wherein differences in the molecular weight are primarily attributable to differences in the number of monomer units comprising the following: (a) a simple weight majority of molecules containing at least three monomer units which are covalently bound to at least one other monomer unit or other reactant; (b) less than a simple weight majority of molecules of the same molecular weight; (6) polymerised part means the part of a substance composition consisting of molecules characterised by the sequence of one or more types of monomer units. Molecules such as dimers, trimers contribute also to the polymerised part. However, the term polymerised part does not cover unreacted monomer or unreacted other reactants; (7) pre-polymer is a substance resulting from a polymerisation-type of reaction and that is further reacted into a final polymer in a material or product; (8) organic cementitious constituent means an organic substance that is used in the manufacture of cementitious materials; (9) cement means a finely ground inorganic material which, when mixed with water, forms a paste that sets and hardens by means of hydration reactions and processes and which, after hardening, retains its strength and stability even under water; (10) cementitious material means a material that contains a hydraulic cement in sufficient proportion to act as the main binder by forming a hydrate structure which governs the performance of the material; (11) non-intentionally added species means either one of the following: (a) an impurity of a starting substance or organic cementitious constituent or composition; (b) a reaction product or a degradation product of a starting substance or organic cementitious constituent that forms during the processing or use of the material; (c) a reaction product or a degradation product of a starting substance or organic cementitious constituent that forms in contact with water during the use of the material; (12) metallic material means a metal or metal alloy used either in bulk form or as metallic plating; (13) ceramic materials means inorganic poly- or single crystalline, non-metallic solid materials subjected to high temperature in manufacture; (14) enamel means a material that is a vitreous material obtained by melting at temperatures higher than 1200 °C and fritting of a mixture of inorganic substances;

(15) maximum tolerable concentration at the tap (MTCtap) means the maximum permitted concentration of a substance transferred from a specific material into water intended for human consumption.

Article 3

Transitional provision Starting substances, compositions and constituents which have been approved by a Member State competent authority during the period from 13 July 2021 to 31 December 2026 in accordance with national provisions may be used in the manufacture of materials or products that come into contact with water intended for human consumption until 31 December 2032, provided they comply with the parametric value of 5 μg/l Pb (lead) at the tap as set out in Part B of Annex I to Directive (EU) 2020/2184.

Article 4

Entry into force This Decision shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union. It shall apply from 31 December 2026. Done at Brussels, 23 January 2024. For the Commission The President Ursula von der Leyen

Annex

ANNEX I EUROPEAN POSITIVE LIST OF STARTING SUBSTANCES FOR ORGANIC MATERIALS Table 1 European positive lists of individual starting substances for organic materials EUPL NumberEC NumberCAS NumberFCM substance Number (A)Starting substance nameTechnical function (B)Drinking water contact materials (C)Maximum Tolerable Concentration at the tap in organic materials (MTCtap, organics) in μg/lTotal Maximum Tolerable Concentration at the tap (MTC(T)tap, organics) in μg/l (D)Conditions of useExpiry dateValue for the starting substanceValues for other relevant chemical species (E)00011albuminMonomer or other reactantAll31 December 202800022albumin, coagulated by formaldehydeMonomer or other reactantAll31 December 202800037acetylacetic acid, saltsAdditive or polymer production aidAll31 December 2028000418aluminium calcium hydroxide phosphite, hydrateAdditive or polymer production aidAllFor aluminium, refer to Annex V.If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028 000521carbonic acid, salts Additive Polymer production aid Aid to polymerisation AllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028000624cotton fibresAdditiveAll31 December 2028000729di-n-octyltin bis(ethyl maleate)Additive or polymer production aidAll(10)31 December 2034000830di-n-octyltin 1,4-butanediol bis(mercaptoacetate)Additive or polymer production aidAll(10)31 December 2028000932di-n-octyltin dimaleate, polymers (n = 2-4)Additive or polymer production aidAll(10)31 December 2034001033di-n-octyltin thiobenzoate 2-ethylhexyl mercaptoacetateAdditive or polymer production aidAll(10)31 December 2028001134ethylhydroxymethylcelluloseAdditive or polymer production aidAll31 December 2028

001235ethylhydroxypropylcelluloseAdditive or polymer production aidAll31 December 2028001336fats and oils, from animal or vegetable food sources Polymer production aid Additive Other (processing aid) All31 December 2028001437fats and oils, hydrogenated, from animal or vegetable food sources Polymer production aid Additive All31 December 2028001539glass microballsAdditiveAll31 December 2028001654glycerol monooleate, ester with ascorbic acidAdditive or polymer production aidAll31 December 2028001755glycerol monooleate, ester with citric acidAdditive or polymer production aidAll31 December 2028001856glycerol monopalmitate, ester with ascorbic acidAdditive or polymer production aidAll31 December 2028001957glycerol monopalmitate, ester with citric acidAdditive or polymer production aidAll31 December 2028002058glycerol monostearate, ester with ascorbic acidAdditive or polymer production aidAll31 December 2028 002159glycerol monostearate, ester with citric acidAdditive or polymer production aidAll31 December 2028002260glycine, saltsAdditive or polymer production aidAll31 December 2028002362lysine, saltsAdditive or polymer production aidAll31 December 2028002463manganese pyrophosphiteAdditive or polymer production aidAllFor manganese, refer to Annex V.If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028002564methylhydroxymethylcelluloseAdditive or polymer production aidAll31 December 2028002670polyacrylic acid, saltsAdditive or polymer production aidAll(21)31 December 2037002771polydimethylsiloxane, γ-hydroxy propylatedAdditive or polymer production aidAll30031 December 2034 002872polyester of adipic acid with glycerol or pentaerythritol, esters with even numbered, unbranched C12-C22 fatty acidsAdditive or polymer production aidPlastics(31)Purity of starting substance: the fraction with molecular weight below 1000 Da shall not exceed 5 % (w/w).31 December 2034002974polyethyleneglycol diricinoleateAdditive or polymer production aidAll210031 December 2034003075polyethyleneglycol esters of aliph. monocarb. acids (C6-C22) and their ammonium and sodium sulfates Additive Polymer production aid Other (processing aid) AllFor ammonium, refer to Annex V.31 December 2037003176polyethylene glycol (EO = 1-30, typically 5) ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylateAdditive or polymer production aidPlastics2,5Only for use in PET.31 December 2034003277polyethyleneglycol (EO = 1-30, typically 5) ether of butyl-2-cyano-3-(4-hydroxyphenyl) acrylateAdditive or polymer production aidPlastics2,5Only for use in PET.31 December 2034 003379polyoxyalkyl (C2-C4) dimethyl polysiloxane Additive Polymer production aid All31 December 2034003481propylhydroxyethylcelluloseAdditive or polymer production aidAll31 December 2028003582propylhydroxymethylcelluloseAdditive or polymer production aidAll31 December 2028003683propylhydroxypropylcelluloseAdditive or polymer production aidAll31 December 2028003784silicates, natural (with the exception of asbestos)AdditiveAllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028

003885silicates, natural, silanated (with the exception of asbestos)AdditiveAllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028003986silicic acid, silylatedAdditiveAllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028004087silicon dioxide, silanatedAdditiveAll For synthetic amorphous silicon dioxide, silanated: primary particles of 1–100 nm which are aggregated to a size of 0,1–1 μm and may form agglomerates within the size distribution of 0,3 μm to the mm size. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 004188sodium monoalkyl dialkylphenoxybenzenedisulfonateAdditive or polymer production aidAll45031 December 2028004290taurine, saltsAdditive or polymer production aidAll31 December 2031004391tetradecyl-polyethyleneglycol(EO = 3-8) ether of glycolic acidAdditive or polymer production aidAll75031 December 2034004492tricyclodecanedimethanol bis(hexahydrophthalate)Additive or polymer production aidAll2,531 December 2028 004593waxes, paraffinic, refined, derived from petroleum based or synthetic hydrocarbon feedstocks, low viscosity Monomer or other reactant (base oil) Additive Polymer production aid Other (processing aid) All2,5 Average molecular weight not less than 350 Da. Viscosity at 100 °C not less than 2,5 cSt (2,5 × 10-6 m2 /s). Content of hydrocarbons with carbon number less than 25, not more than 40 % (w/w). 31 December 2028004694waxes, refined, derived from petroleum based or synthetic hydrocarbon feedstocks, high viscosity Additive Polymer production aid All Average molecular weight not less than 500 Da. Viscosity at 100 °C not less than 11 cSt (11 × 10-6 m2 /s). Content of mineral hydrocarbons with carbon number less than 25, not more than 5 % (w/w). 31 December 2028004795white mineral oils, paraffinic, derived from petroleum based hydrocarbon feedstocks Monomer or other reactant (base oil) Additive Polymer production aid All Average molecular weight not less than 480 Da. Viscosity at 100 °C not less than 8,5 cSt (8,5 × 10-6 m2 /s). Content of mineral hydrocarbons with carbon number less than 25, not more than 5 % (w/w). 31 December 2028 004897petroleum hydrocarbon resins (hydrogenated) Monomer or other reactant (resin) Additive All150 (Note: based on a notified national approval) Petroleum hydrocarbon resins, hydrogenated are produced by the catalytic or thermal polymerisation of dienes and olefins of the aliphatic, alicyclic and/or monobenzenoidarylalkene types from distillates of cracked petroleum stocks with a boiling range not greater than 220 °C, as well as the pure monomers found in these distillation streams, subsequently followed by distillation, hydrogenation and additional processing.

Properties: Viscosity at 120 °C: > 3 Pa.s, — Softening point: > 95 °C as determined by ASTM Method E 28-67, Bromine number: < 40 (ASTM D1159), The colour of a 50 % solution in toluene < 11 on the Gardner scale, Residual aromatic monomer ≤50 ppm. 31 December 2028 004950-00-098formaldehydeMonomer or other reactantAll(15)31 December 2028005050-70-4100sorbitol Monomer or other reactant Additive All31 December 2037005150-81-7101ascorbic acidMonomer or other reactantAll31 December 2037005256-81-5103glycerol Monomer or other reactant Additive Polymer production aid Other (processing aid) All31 December 2037005357-09-0104hexadecyltrimethylammonium bromide Additive Polymer production aid All30031 December 2034 005457-10-3105palmitic acid Monomer or other reactant Polymer production aid Other (processing aid) All31 December 2037005557-11-4106stearic acid Monomer or other reactant Additive Polymer production aid Aid to polymerisation Other (processing aid) All31 December 2037005657-13-6107urea Monomer or other reactant Additive Polymer production aid Other (processing aid) All31 December 2037005757-50-1108sucroseMonomer or other reactantAll31 December 2037005860-00-4111ethylenediaminetetraacetic acid (EDTA) Additive Polymer production aid All6031 December 2034005960-33-3112linoleic acidMonomer or other reactantAll31 December 2037 006064-17-5113ethanol Monomer or other reactant Additive Polymer production aid All31 December 2034006164-18-6114formic acid Monomer or other reactant Polymer production aid Other (processing aid) All31 December 2034006264-19-7115acetic acid Monomer or other reactant Additive Polymer production aid Other (processing aid) All31 December 2037006365-85-0116benzoic acid Monomer or other reactant Polymer production aid Aid to polymerisation All31 December 2034006467-56-1117methanolMonomer or other reactantAll31 December 2034006567-63-01182-propanol Monomer or other reactant Polymer production aid All31 December 2034006667-64-1119acetonePolymer production aidAll31 December 2034 006767-68-5120dimethyl sulfoxidePolymer production aidAll31 December 2034006869-72-7121salicylic acidMonomer or other reactant, aid to polymerisation, Other (processing aid) Coatings Rubber 31 December 2028006971-23-81221-propanolMonomer or other reactantAll31 December 2034007071-36-31231-butanol Monomer or other reactant Polymer production aid All31 December 2034007171-41-01241-pentanolMonomer or other reactantAll31 December 2034007274-85-1125ethyleneMonomer or other reactantAll31 December 2034007374-86-2126acetyleneMonomer or other reactantAll31 December 2034007475-01-4127vinyl chlorideMonomer or other reactantAll0,5Maximum residual content in the final material (QM) = 1 mg/kg in the product.31 December 2028007575-07-0128acetaldehydeMonomer or other reactantAll(1)31 December 2028007675-21-8129ethylene oxideMonomer or other reactantAll0,1 Maximum residual content in the final material (QM) = 1 mg/kg in the product. Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water.

31 December 2028 007775-35-4130vinylidene chlorideMonomer or other reactantAll0,1Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method.31 December 2028007875-37-61311,1-difluoroethaneAdditive or polymer production aidAll31 December 2034007975-38-7132vinylidene fluorideMonomer or other reactantAll25031 December 2034008075-44-5133carbonyl chlorideMonomer or other reactantAll0,1 Maximum residual content in the final material (QM) = 1 mg/kg in the product. Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. 31 December 2034008175-45-6134chlorodifluoromethaneAdditive or polymer production aidAll300Content of chlorofluoromethane less than 1 mg/kg of the substance.31 December 2034008276-22-2136camphorAdditive or polymer production aidAll31 December 2034 008377-62-31372,2′-methylenebis(4-methyl-6-(1- methylcyclohexyl)phenol)AdditiveAll(5)31 December 2034008477-90-7138tri-n-butyl acetyl citrateAdditive or polymer production aidAll(31)31 December 2034008577-92-9139citric acid Monomer or other reactant Polymer production aid Other (processing aid) All31 December 2037008677-93-0140citric acid, triethyl esterAdditive or polymer production aidAll(31)31 December 2034008777-99-61411,1,1-trimethylolpropane Monomer or other reactant Additive All30031 December 2034008878-08-0142vinyltriethoxysilane Additive Other (processing aid) All2,5Only to be used as a surface treatment agent.31 December 2034008978-78-4143isopentaneAdditive or polymer production aidAll31 December 2034009078-79-51442-methyl–1,3-butadiene (isoprene)Monomer or other reactantAll0,1Maximum residual content in the final material (QM) = 1 mg/kg in the product.31 December 2028 009179-06-1145acrylamideMonomer or other reactantAll0,131 December 2028009279-09-4146propionic acidMonomer or other reactantAll31 December 2037009379-10-7147acrylic acidMonomer or other reactantAll(21)31 December 2034009479-38-9148chlorotrifluoroethyleneMonomer or other reactantAll0,1Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method.31 December 2034009579-39-0149methacrylamideMonomer or other reactantAll0,131 December 2034009679-41-4150methacrylic acidMonomer or other reactantAll(22)31 December 2034009780-05-71512,2-bis(4-hydroxyphenyl)propane Monomer or other reactant Additive All2,5Technical function as additive is only accepted for plastics.31 December 2028009880-07-91524,4′-dichlorodiphenyl sulfoneMonomer or other reactantAll2,531 December 2034009980-08-01534,4′-diaminodiphenyl sulfoneMonomer or other reactantAll25031 December 2034010080-09-11544,4′-dihydroxydiphenyl sulfoneMonomer or other reactantAll2,531 December 2028 010180-56-8155α-pineneMonomer or other reactantAll31 December 2034010280-62-6156methacrylic acid, methyl esterMonomer or other reactantAll(22)31 December 2034010384-74-2157phthalic acid, dibutyl ester ('DBP')AdditiveAll6,0

(31) (35) Only to be used as: (a) plasticiser; (b) technical support agent in polyolefins in concentrations up to 0,05 % in the product. 31 December 2028010485-44-9158phthalic anhydride Monomer or other reactant Aid to polymerisation All31 December 2034010585-68-7159phthalic acid, benzyl butyl ester ('BBP')AdditiveAll300 (31) (35) Only to be used as (a) plasticiser; (b) technical support agent in concentrations up to 0,1 % in the product. ≤ 5% as sum of all phthalates. 31 December 2028 010687-18-3160salicylic acid, 4-tert-butylphenyl esterAdditive or polymer production aidAll600For the MTCtap values of degradation products, refer to Table 4.31 December 2028010787-69-4161L-(+)-tartaric acid Monomer or other reactant Polymer production aid Other (processing aid) All31 December 2034010887-78-5162mannitol Monomer or other reactant Polymer production aid All31 December 2028010988-24-41632,2′-methylene bis(4-ethyl-6-tert-butylphenol)AdditiveAll(13)31 December 2034011088-68-61642-aminobenzamideAdditive or polymer production aidPlastics2,5Only for use in PET.31 December 2034011188-99-3165o-phthalic acidMonomer or other reactantAll31 December 2034 011289-32-7166pyromellitic anhydrideMonomer or other reactantAll2,5 – expressed as the sum of pyromellitic anhydride and pyromellitc acid31 December 2034011391-08-71672,6-toluene diisocyanateMonomer or other reactantAll(16) Maximum residual content in the final material (QM) = 1 mg/kg in product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034011491-76-91682,4-diamino-6-phenyl-1,3,5- triazineMonomer or other reactantAll25031 December 2034011591-97-41693,3′-dimethyl–4,4′-diisocyanato biphenylMonomer or other reactantAll(16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 011692-88-61704,4′-dihydroxybiphenylMonomer or other reactantAll30031 December 2034011793-58-3171benzoic acid, methyl esterAdditive or polymer production aidAll31 December 2034011893-89-0172benzoic acid, ethyl esterAdditive or polymer production aidAll31 December 2034011994-13-31734-hydroxybenzoic acid, propyl esterAdditive or polymer production aidAll31 December 2034012095-48-7174o-cresolMonomer or other reactantAll31 December 2034012196-05-9175methacrylic acid, allyl esterMonomer or other reactantAll2,531 December 2034012296-33-3176acrylic acid, methyl esterMonomer or other reactantAll(21)31 December 2034012396-49-1177ethylene carbonateMonomer or other reactantAll1500 - expressed as ethyleneglycol31 December 2034012496-69-51784,4′-thiobis(6-tert-butyl-3-methyl phenol)AdditiveAll2431 December 2034012597-23-41792,2′-dihydroxy–5,5′-dichlorodiphenylmethaneAdditive or polymer production aidAll60031 December 2028012697-53-0180eugenolMonomer or other reactantAll(32)31 December 2034 012797-63-2181methacrylic acid, ethyl esterMonomer or other reactantAll(22)31 December 2034012897-65-4182itaconic acid

Monomer or other reactant Polymer production aid Other (processing aid) All31 December 2034012997-86-9183methacrylic acid, isobutyl esterMonomer or other reactantAll(22)31 December 2034013097-88-1184methacrylic acid, butyl esterMonomer or other reactantAll(22)31 December 2034013197-90-5185methacrylic acid, diester with ethyleneglycolMonomer or other reactantAll2,531 December 2034013298-54-41864-tert-butylphenolMonomer or other reactantAll2,531 December 2028013398-83-9187α-methylstyreneMonomer or other reactantAll2,531 December 2034013499-63-8188isophthalic acid dichlorideMonomer or other reactantAll(26)31 December 2034013599-76-31894-hydroxybenzoic acid, methyl esterAdditive or polymer production aidAll31 December 2034013699-96-7190p-hydroxybenzoic acid Monomer or other reactant Polymer production aid Other (processing aid) All31 December 2034 0137100-20-9191terephthalic acid dichlorideMonomer or other reactantAll(27)31 December 20340138192phthalic acid Monomer or other reactant Additive All(27)31 December 20340139100-42-5193styreneMonomer or other reactantAll31 December 20280140100-51-6194benzyl alcohol Monomer or other reactant Additive Polymer production aid All31 December 20340141100-52-7195benzaldehydeAdditive or polymer production aidAllThere is a risk that the migration of the substance deteriorates the organoleptic characteristics of the drinking water and then, that the product does not comply with Commission Implementing Decision (EU) 2024/368.31 December 20340142100-97-0196hexamethylenetetramine Monomer or other reactant Aid to polymerisation All(15)31 December 20340143101-43-9197methacrylic acid, cyclohexyl esterMonomer or other reactantAll2,531 December 2034 0144101-68-8198diphenylmethane–4,4′-diisocyanateMonomer or other reactantAll(16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 20340145101-90-6199resorcinol diglycidyl etherMonomer or other reactantAll0,1 For indirect water contact only, behind a PET layer. Verification of compliance by residual content per water contact surface area (QMA); QMA = 0,0083 dm-1. 31 December 20280146102-08-9200N,N′-diphenylthioureaAdditive or polymer production aidAll15031 December 20340147102-09-0201diphenyl carbonateMonomer or other reactantAll2,531 December 20340148102-39-6202(1,3-phenylenedioxy)diacetic acidMonomer or other reactantAll2,531 December 20280149102-40-92031,3-bis(2-hydroxyethoxy)benzeneMonomer or other reactantAll2,531 December 2034 0150102-60-3204N,N,N′,N′-tetrakis(2-hydroxypropyl)ethylenediamine Monomer or other reactant Additive or polymer production aid All31 December 20340151103-11-7206acrylic acid, 2-ethylhexyl esterMonomer or other reactantAll2,531 December 20340152103-23-1207adipic acid, bis(2-ethylhexyl) esterAdditiveAll900(31)31 December 20340153103-90-2208N-(4-hydroxyphenyl) acetamideMonomer or other reactantAll2,531 December 20340154104-76-72092-ethyl-1-hexanolMonomer or other reactantAll150031 December 20340155105-08-82101,4-bis(hydroxymethyl)cyclohexaneMonomer or other reactantAll31 December 20340156105-38-4211propionic acid, vinyl esterMonomer or other reactantAll(1)31 December 20340157105-60-2212caprolactam

Monomer or other reactant Additive Aid to polymerisation All(4)When used for coatings, only for hot curing coatings.31 December 20340158105-62-42131,2-propyleneglycol dioleateAdditive or polymer production aidAll31 December 2028 0159106-14-921412-hydroxystearic acid Monomer or other reactant Additive Other (processing aid) All31 December 20340160106-31-0215butyric anhydrideMonomer or other reactantAll31 December 20340161106-44-5216p-cresolMonomer or other reactantAll31 December 20340162106-46-72171,4-dichlorobenzeneMonomer or other reactantAll60031 December 20280163106-63-8218acrylic acid, isobutyl esterMonomer or other reactantAll(21)31 December 20340164106-89-8219epichlorohydrinMonomer or other reactantAll0,1 Maximum residual content in the final material (QM) = 1 mg/kg in the product. Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. 31 December 20280165106-91-2220methacrylic acid, 2,3-epoxypropyl esterMonomer or other reactantAll1,0Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water.31 December 2028 0166106-97-8221butaneAdditive or polymer production aidAll31 December 20340167106-98-92221-buteneMonomer or other reactantAll31 December 20340168106-99-0223butadieneMonomer or other reactantAll0,1Maximum residual content in the final material (QM) = 1 mg/kg in the product.31 December 20280169107-13-1225acrylonitrileMonomer or other reactantAll0,131 December 20280170107-15-3226ethylenediamine Monomer or other reactant Polymer production aid All60031 December 20340171107-21-1227ethyleneglycolMonomer or other reactantAll(2)31 December 20340172107-92-6229butyric acidMonomer or other reactantAll31 December 20370173108-01-0230dimethylaminoethanolMonomer or other reactantAll90031 December 20340174108-05-4231acetic acid, vinyl esterMonomer or other reactantAll60031 December 20280175108-24-7232acetic anhydride Monomer or other reactant Additive Polymer production aid All31 December 2034 0176108-30-5233succinic anhydrideMonomer or other reactantAll31 December 20340177108-31-6234maleic anhydride Monomer or other reactant Additive Polymer production aid Other (processing aid) All(3)31 December 20340178108-39-4235m-cresolMonomer or other reactantAll31 December 20340179108-45-22361,3-phenylenediamineMonomer or other reactantAll0,1A detection limit of 0,1 μg/l applies.31 December 20280180108-46-32371,3-dihydroxybenzene (resorcinol) Monomer or other reactant Other (processing aid) All12031 December 20340181108-55-4238glutaric anhydride Monomer or other reactant Other (processing aid) All31 December 20340182108-78-12392,4,6-triamino-1,3,5-triazine (melamine)Monomer or other reactantAll12531 December 20280183108-91-8240cyclohexylamine Monomer or other reactant Aid to polymerisation All31 December 20280184108-95-2241phenolMonomer or other reactantAll15031 December 2028 0185109-43-3242sebacic acid, dibutyl ester Additive Polymer production aid

All(31)31 December 20340186109-53-5243isobutyl vinyl etherMonomer or other reactantAll2,5Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water.31 December 20340187109-66-0244pentaneAdditive or polymer production aidAll31 December 20340188109-67-12451-penteneMonomer or other reactantAll25031 December 20340189109-99-9246tetrahydrofuran Monomer or other reactant Polymer production aid All3031 December 20280190110-15-6247succinic acid Monomer or other reactant Other (processing aid) All31 December 20370191110-16-7248maleic acid Monomer or other reactant Other (processing aid) All(3)31 December 20340192110-17-8249fumaric acid Monomer or other reactant Other (processing aid) All31 December 2034 0193110-30-5250N,N′-ethylenebisstearamide Additive Polymer production aid All31 December 20340194110-31-6251N,N′-ethylenebisoleamideAdditive or polymer production aidAll31 December 20340195110-44-1252sorbic acidAdditive or polymer production aidAll31 December 20340196110-60-12531,4-diaminobutaneMonomer or other reactantAll31 December 20340197110-63-42541,4-butanediol Monomer or other reactant Additive All(29)31 December 20340198110-88-3255trioxaneMonomer or other reactantAll25031 December 20340199110-94-1256glutaric acid Monomer or other reactant Other (processing aid) All31 December 20370200111-06-8258palmitic acid, butyl esterAdditive or polymer production aidAll31 December 20280201111-14-8259heptanoic acidAdditive or polymer production aidAll31 December 2034 0202111-20-6260sebacic acid Monomer or other reactant Additive Other (processing aid) All31 December 20340203111-40-0261diethylenetriamineMonomer or other reactantAll25031 December 20340204111-41-1262N-(2-aminoethyl)ethanolamineAdditive or polymer production aidAll2,5For indirect water contact only, behind a PET layer.31 December 20280205111-46-6263diethyleneglycol Monomer or other reactant Aid to polymerisation All(2)31 December 20340206111-66-02641-octeneMonomer or other reactantAll75031 December 20340207111-87-52651-octanolMonomer or other reactantAll31 December 20340208112-27-6266triethyleneglycol Monomer or other reactant Additive Other (processing aid) All31 December 20340209112-30-12671-decanolMonomer or other reactantAll31 December 20340210112-41-42681-dodeceneMonomer or other reactantAll2,531 December 20340211112-60-7269tetraethyleneglycolMonomer or other reactantAll31 December 2034 0212112-80-1270oleic acid Monomer or other reactant Additive Other (processing aid) All31 December 20280213112-84-5271erucamide Polymer production aid Other (processing aid) All31 December 20340214112-85-6272behenic acidMonomer or other reactantAll31 December 20370215112-86-7273erucic acid Monomer or other reactant Other (processing aid) All31 December 20280216112-96-9274octadecyl isocyanateMonomer or other reactantAll(16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA).

31 December 20340217115-07-1275propyleneMonomer or other reactantAll31 December 20340218115-11-7276isobuteneMonomer or other reactantAll31 December 2034 0219115-27-5277hexachloroendomethylenetetrahydrophthalic anhydride Monomer or other reactant Other (processing aid) All0,131 December 20340220115-28-6278hexachloroendomethylenetetrahydrophthalic acid Monomer or other reactant Other (processing aid) All0,131 December 20280221115-77-5279pentaerythritol Monomer or other reactant Additive All31 December 20340222115-96-8280phosphoric acid, trichloroethyl esterAdditive or polymer production aidAll0,131 December 20280223116-14-3281tetrafluoroethyleneMonomer or other reactantAll2,5When used for coatings, only as monomer for polymeric additives.31 December 20280224116-15-4282hexafluoropropyleneMonomer or other reactantAll0,1(38)31 December 20280225117-81-7283phthalic acid, bis(2-ethylhexyl) ester ('DEHP') Additive Polymer production aid All30 (31) (35) Only to be used as: (a) plasticiser; or (b) technical support agent in concentrations up to 0,1 % in the product. 31 December 2028 0226119-36-8284salicylic acid, methyl esterAdditive or polymer production aidAll150031 December 20280227119-47-12852,2′-methylene bis(4-methyl-6-tert-butylphenol)AdditiveAll(13)31 December 20280228119-61-9286benzophenoneAid to polymerisationAll3031 December 20280229120-47-82874-hydroxybenzoic acid, ethyl esterAdditive or polymer production aidAll31 December 20340230120-61-6288terephthalic acid, dimethyl esterMonomer or other reactantAll31 December 20340231120-80-92891,2-dihydroxybenzeneMonomer or other reactantAll30031 December 20280232121-79-9290gallic acid, propyl esterAdditiveAll(19)31 December 20340233121-91-5291isophthalic acid Monomer or other reactant Other (processing aid) All(26)31 December 20340234122-20-3292triisopropanolamine Monomer or other reactant Aid to polymerisation All25031 December 20340235122-52-1293phosphorous acid, triethyl esterMonomer or other reactantAll0,1Maximum residual content in the final material (QM) = 1 mg/kg in the product.31 December 2034 0236123-28-4294thiodipropionic acid, didodecyl esterAdditive or polymer production aidAll(14)31 December 20340237123-31-92951,4-dihydroxybenzeneMonomer or other reactantAll3031 December 20280238123-38-6296propionaldehydeMonomer or other reactantAll31 December 20340239123-62-6297propionic anhydrideMonomer or other reactantAll31 December 20340240123-72-8298butyraldehydeMonomer or other reactantAll31 December 20340241123-76-2299levulinic acidAdditive or polymer production aidAll31 December 20370242123-86-4300acetic acid, butyl esterPolymer production aidAll31 December 20340243123-95-5301stearic acid, butyl esterAdditiveAll31 December 20280244123-99-9302azelaic acidMonomer or other reactantAll31 December 20340245124-04-9303adipic acidMonomer or other reactantAll31 December 20340246124-07-2304caprylic acidMonomer or other reactantAll31 December 20370247124-09-4305hexamethylenediamineMonomer or other reactantAll12031 December 20340248124-26-5306stearamideOther (processing aid)All31 December 2034

0249124-38-9307carbon dioxideAdditive or polymer production aidAll31 December 20370250126-13-6308sucrose acetate isobutyrateAdditive or polymer production aidAll31 December 20280251126-14-7309sucrose octaacetateAdditive or polymer production aidAll31 December 20280252126-30-73102,2-dimethyl–1,3-propanediol (neopentylglycol)Monomer or other reactantAll2,5 - expressed as mono and diethylene glycols31 December 20340253126-58-9311dipentaerythritolMonomer or other reactantAll31 December 20340254126-98-7312methacrylonitrileMonomer or other reactantAll0,131 December 20340255127-63-9313diphenyl sulfoneMonomer or other reactantAll15031 December 20340256127-91-3314β-pineneMonomer or other reactantAll31 December 20280257128-37-03152,6-di-tert-butyl-p-cresol Additive Polymer production aid All150For the MTCtap values of degradation products, refer to Table 4.31 December 2034 0258131-17-9316phthalic acid, diallyl esterMonomer or other reactantAll0,131 December 20340259131-53-33172,2′-dihydroxy-4-methoxybenzophenoneAdditive or polymer production aidAll(8)31 December 20340260131-56-63182,4-dihydroxybenzophenoneAid to polymerisationAll(8)31 December 20340261131-57-73192-hydroxy-4-methoxybenzophenoneAdditive or polymer production aidAll(8)31 December 20340262136-60-7320benzoic acid, butyl esterAdditive or polymer production aidAll31 December 20340263137-66-6321ascorbyl palmitateAdditive or polymer production aidAll31 December 20340264140-88-5323acrylic acid, ethyl esterMonomer or other reactantAll(21)31 December 20340265141-22-0324ricinoleic acidMonomer or other reactantAll210031 December 20280266141-32-2325acrylic acid, n-butyl esterMonomer or other reactantAll, except rubber(21)31 December 20340267141-43-53262-aminoethanolMonomer or other reactantAll2,5For indirect water contact only, behind a PET layer, except when used for coatings.31 December 2034 0268141-78-6327acetic acid, ethyl esterAdditiveAll31 December 20340269141-82-2328malonic acid Monomer or other reactant Other (processing aid) All31 December 20340270142-62-1329hexanoic acidMonomer or other reactantAll31 December 20370271143-07-7330lauric acid Monomer or other reactant Additive Polymer production aid Other (processing aid) All31 December 20370272143-08-83311-nonanolMonomer or other reactantAll31 December 20340273143-28-2332oleyl alcohol Monomer or other reactant Additive Polymer production aid All31 December 20340274144-62-7333oxalic acid Monomer or other reactant Other (processing aid) All30031 December 20340275151-56-4334ethyleneimineMonomer or other reactantAll0,131 December 20280276301-02-0335oleamide Additive Polymer production aid Other (processing aid) All31 December 2028 0277334-48-5336n-decanoic acid Monomer or other reactant Additive Other (processing aid) All31 December 20370278345-92-63374,4′-difluorobenzophenoneMonomer or other reactantAll2,531 December 20340279373-49-9338palmitoleic acidMonomer or other reactantAll31 December 20370280409-21-2339silicon carbide Monomer or other reactant

Additive All31 December 20280281461-58-5340dicyanodiamideMonomer or other reactantAll300031 December 20340282498-66-8341bicyclo[2.2.1]hept-2-eneMonomer or other reactantAll2,531 December 20340283502-44-3342caprolactoneMonomer or other reactantAll(28)31 December 20340284504-63-23431,3-propanediolMonomer or other reactantAll2,531 December 20340285505-65-73441,4-butanediol formalMonomer or other reactantAll2,5 (15) (29) 31 December 20340286506-30-9345arachidic acidMonomer or other reactantAll31 December 20370287514-10-3346abietic acidMonomer or other reactantAll31 December 20280288528-44-9347trimellitic acidMonomer or other reactantAll(20)31 December 2028 0289544-63-8348myristic acid Monomer or other reactant Polymer production aid Other (processing aid) All31 December 20280290552-30-7349trimellitic anhydrideMonomer or other reactantAll(20)31 December 20340291557-59-5350lignoceric acidMonomer or other reactantAll31 December 20280292563-45-13513-methyl-1-buteneMonomer or other reactantPlastics0,1 Only to be used in polypropylene. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 20280293576-26-13522,6-dimethylphenolMonomer or other reactantAll2,531 December 20340294584-09-8353carbonic acid, rubidium saltAdditive or polymer production aidAll60031 December 2028 0295584-84-93542,4-toluene diisocyanateMonomer or other reactantAll(16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 20340296585-07-9355methacrylic acid, tert-butyl esterMonomer or other reactantAll(22)31 December 20340297592-41-63561-hexeneMonomer or other reactantAll15031 December 20340298599-64-43584-cumylphenolMonomer or other reactantAll2,531 December 20340299611-99-43594,4′-dihydroxybenzophenoneAid to polymerisationAll(8)31 December 20340300620-67-7360glycerol triheptanoateAdditive or polymer production aidAll31 December 20340301629-11-83611,6-hexanediolMonomer or other reactantAll2,531 December 20340302630-08-0362carbon monoxideMonomer or other reactantAll31 December 20280303646-06-03631,3-dioxolaneMonomer or other reactantAll25031 December 2034 0304689-12-3365acrylic acid, isopropyl esterMonomer or other reactantAll(21)31 December 20280305691-37-23664-methyl-1-penteneMonomer or other reactantAll2,531 December 20340306693-23-2367n-dodecanedioic acid Monomer or other reactant Other (processing aid) All31 December 20340307693-36-7368thiodipropionic acid, dioctadecyl esterAdditive or polymer production aidAll(14)31 December 20340308693-57-236912-aminododecanoic acidMonomer or other reactantAll2,531 December 20340309760-93-0370methacrylic anhydrideMonomer or other reactantAll(22)31 December 20340310818-61-1371acrylic acid, monoester with ethyleneglycolMonomer or other reactantAll(21)31 December 20340311822-06-0372hexamethylene diisocyanateMonomer or other reactantAll(16)

Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0312840-65-33732,6-naphthalenedicarboxylic acid, dimethyl esterMonomer or other reactantAll2,531 December 20340313868-77-9374methacrylic acid, monoester with ethyleneglycolMonomer or other reactantAll(22)31 December 20340314872-05-93751-deceneMonomer or other reactantAll2,531 December 20340315872-50-4376N-methylpyrrolidoneAdditive or polymer production aidAll300031 December 20280316919-30-23773-aminopropyltriethoxysilane Additive Polymer production aid All2,5 Residual extractable content of 3-aminopropyltriethoxysilane to be less than 3 mg/kg filler when used for the reactive surface treatment of inorganic fillers. MTCtap = 2,5 μg/l when used for the surface treatment of materials and products. 31 December 20340317923-02-4378N-methylolmethacrylamideMonomer or other reactantAll2,531 December 20340318924-42-5379N-methylolacrylamideMonomer or other reactantAll0,131 December 2028 0319925-60-0380acrylic acid, propyl esterMonomer or other reactantAll(21)31 December 20280320931-88-4381cycloocteneMonomer or other reactantAll2,531 December 20280321947-04-6382laurolactamMonomer or other reactantAll25031 December 20340322948-65-23832-phenylindoleAdditive or polymer production aidAll75031 December 20280323991-84-43842,4-bis(octylmercapto)-6-(4- hydroxy–3,5-di-tert-butylanilino)-1,3,5-triazineAdditiveAll1500For the MTCtap values of degradation products, refer to Table 4.31 December 20340324999-61-1385acrylic acid, 2-hydroxypropyl esterMonomer or other reactantAll2,5 - expressed as the sum of acrylic acid, 2-hydroxypropyl ester and acrylic acid, 2-hydroxyisopropyl ester It may contain up to 25 % (w/w) of acrylic acid, 2-hydroxyisopropyl ester (CAS No. 2918-23-2). Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2028 03251034-01-1386gallic acid, octyl esterAdditiveAll(19)31 December 202803261072-63-53871-vinylimidazoleMonomer or other reactantAll2,531 December 202803271120-36-13881-tetradeceneMonomer or other reactantAll2,531 December 203403281141-38-43892,6-naphthalenedicarboxylic acidMonomer or other reactantAll25031 December 203403291166-52-5390gallic acid, dodecyl esterAdditiveAll(19)31 December 202803301187-93-5391perfluoromethyl perfluorovinyl etherMonomer or other reactantPlastics, coatings, rubber0,1(38) Only to be used in: coatings; or rubber; or -fluoro- and perfluoropolymers intended for products with a CF (S/V ratio) of ≤ 0,0067 dm-1. 31 December 202803311241-94-7392phosphoric acid, diphenyl 2-ethylhexyl esterAdditiveAll12031 December 2034 03321302-78-9393bentonite Additive Polymer production aid AllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 202803331305-62-0394calcium hydroxide

Additive Polymer production aid Aid to polymerisation AllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 203403341305-78-8395calcium oxide Additive Aid to polymerisation AllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2034 03351309-42-8396magnesium hydroxideAdditiveAllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 203403361309-48-4397magnesium oxide Additive Aid to polymerisation AllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 202803371309-64-4398antimony trioxideAdditive or polymer production aidAllFor antimony, refer to Annex V.31 December 2028 03381310-58-3399potassium hydroxideAdditive or polymer production aidAllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 203403391310-73-2400sodium hydroxideAdditive or polymer production aidAllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 203403401313-82-2401sodium sulfideMonomer or other reactantAll31 December 2034 03411314-13-2402zinc oxide Additive Aid to polymerisation AllFor zinc, refer to Annex V.If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 203403421314-98-3403zinc sulfide Polymer production aid Additive AllFor zinc, refer to Annex V.31 December 203403431317-33-5404molybdenum disulfideAdditive or polymer production aidAll31 December 202803441321-74-0405divinylbenzeneMonomer or other reactantAll0,1 - expressed as the sum of divinylbenzene and ethylvinylbenzene It may contain up to 45 % (w/w) of ethylvinylbenzene. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 203403451323-39-34061,2-propyleneglycol monostearateAdditive or polymer production aidAll31 December 2034 03461330-80-94081,2-propyleneglycol monooleateAdditive or polymer production aidAll31 December 203703471332-58-7410kaolinAdditiveAll Particles can be thinner than 100 nm only if incorporated at a quantity of less than 12 % w/w in an ethylene vinyl alcohol copolymer (EVOH) inner layer of a multi-layer structure, in which the layer in direct contact with the drinking water provides a functional barrier preventing migration of particles into the water.

If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 03481333-86-4411carbon blackAdditiveAllPolycyclic aromatic hydrocarbons MTCtap = 0,1 μg/l Primary particles of 10 – 300 nm which are aggregated to a size of 100 – 1200 nm which may form agglomerates within the size distribution of 300 nm – mm. Toluene extractables: maximum 0,1 %, determined according to ISO method 6209. UV absorption of cyclohexane extract at 386 nm: < 0,02 AU for a 1 cm cell or < 0,1 AU for a 5 cm cell, determined according to a generally recognised method of analysis. Benzo(a)pyrene content: max 0,25 mg/kg carbon black. Maximum use level of carbon black in plastics: 2,5 % w/w. 31 December 2034 03491335-23-5412copper iodideAdditive or polymer production aidAll (6) For copper, refer to Annex V. 31 December 202803501336-21-6413ammonium hydroxide Additive Polymer production aid AllFor ammonium, refer to Annex V.31 December 203403511338-39-2414sorbitan monolaurateAdditive or polymer production aidAll31 December 203403521338-41-6415sorbitan monostearateAdditive or polymer production aidAll31 December 203403531338-43-8416sorbitan monooleate Additive Polymer production aid All31 December 203703541343-98-2417silicic acid Monomer or other reactant Additive Polymer production aid AllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028 03551344-28-1418aluminium oxide Additive Polymer production aid AllFor aluminium, refer to Annex V.If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 203403561401-55-4419tannic acidsAdditive or polymer production aidAllAccording to the JECFA specifications.31 December 203403571459-93-4420isophthalic acid, dimethyl esterMonomer or other reactantAll2,531 December 203403581477-55-04211,3-benzenedimethanamineMonomer or other reactantAll(33)31 December 203403591533-45-54224,4′-bis(2-benzoxazolyl)stilbeneAdditive or polymer production aidAll2,531 December 203403601623-05-8423perfluoropropylperfluorovinyl etherMonomer or other reactantAll2,5(38)31 December 202803611647-16-14241,9-decadieneMonomer or other reactantAll2,531 December 202803621663-39-4425acrylic acid, tert-butyl esterMonomer or other reactantAll(21)31 December 2034 03631675-54-34262,2-bis(4-hydroxyphenyl)propane bis(2,3-epoxypropyl) etherMonomer or other reactant (resin)All450 - expressed as BADGE and its hydrolysis products BADGE chlorohydrins MTCtap = 50 μg/l bisphenol-A MTCtap = 2,5 μg/l epichlorohydrin MTCtap = 0,1 μg/l (49)In compliance with Commission Regulation (EC) No 1895/2005 (OJ L 302, 19.11.2005, p. 28.).31 December 203403641679-51-24274-(hydroxymethyl)-1-cyclohexeneMonomer or other reactantAll2,531 December 202803651709-70-24281,3,5-trimethyl-2,4,6-tris(3,5-di- tert-butyl-4-hydroxybenzyl)benzeneAdditiveAllFor the MTCtap values of degradation products, refer to Table 4.31 December 203403661761-71-3429bis(4-aminocyclohexyl)methaneMonomer or other reactantAll2,531 December 203403671843-03-44301,1,3-tris(2-methyl-4-hydroxy-5- tert-butylphenyl) butaneAdditive or polymer production aidAll25031 December 203403681843-05-64312-hydroxy-4-n-octyloxybenzophenone

Additive Polymer production aid All(8)31 December 2034 03692035-75-8432adipic anhydrideMonomer or other reactantAll31 December 202803702082-79-3433octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate Additive Polymer production aid All300For the MTCtap values of degradation products, refer to Table 4.31 December 203403712082-81-7434methacrylic acid, diester with 1,4-butanediolMonomer or other reactantAll2,531 December 203403722123-24-2435caprolactam, sodium saltMonomer or other reactantAll(4)31 December 203403732146-71-6436lauric acid, vinyl esterMonomer or other reactantAll31 December 203403742156-97-0437acrylic acid, dodecyl esterAll2,531 December 203403752162-74-5438bis(2,6-diisopropylphenyl) carbodiimideMonomer or other reactantAll2,5 - expressed as the sum of bis(2,6-diisopropylphenyl)carbodiimide and its hydrolysis product 2,6-diisopropylaniline31 December 2037 03762177-70-0439methacrylic acid, phenyl esterMonomer or other reactantAll(22)31 December 203403772210-28-8440methacrylic acid, propyl esterMonomer or other reactantAll(22)31 December 202803782315-68-6441benzoic acid, propyl esterAdditive or polymer production aidAll31 December 202803792425-79-84421,4-butanediol bis(2,3-epoxypropyl)etherMonomer or other reactantAll0,1 Maximum residual content in the final material (QM) = 1 mg/kg in the product expressed as epoxy group. Molecular weight of epoxy group is 43 Da. Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. 31 December 203403802432-99-744311-aminoundecanoic acidMonomer or other reactantAll25031 December 203403812440-22-44442-(2′-hydroxy-5′-methylphenyl)benzotriazoleAdditive or polymer production aidAll(12)31 December 2034 03822466-09-3445pyrophosphoric acid Monomer or other reactant Polymer production aid All31 December 202803832495-35-4446acrylic acid, benzyl esterMonomer or other reactantAll(21)31 December 203403842495-37-6447methacrylic acid, benzyl esterMonomer or other reactantAll(22)31 December 203403852499-59-4448acrylic acid, n-octyl esterMonomer or other reactantAll(21)31 December 202803862500-88-1449dioctadecyl disulfideAdditive or polymer production aidAll2,531 December 203403872561-88-8450sebacic anhydride Monomer or other reactant Other (processing aid) All31 December 202803882682-20-44512-methyl-4-isothiazolin-3-one Additive Polymer production aid All25Only to be used in aqueous polymer dispersions and emulsions.31 December 203403892725-22-64522,4-bis(2,4-dimethylphenyl)-6-(2- hydroxy-4-n-octyloxyphenyl)-1,3,5-triazineAdditive or polymer production aidAll25031 December 2034 03902768-02-7453vinyltrimethoxysilane Additive Other (processing aid) All2,5Verification of compliance by residual content per water contact surface area (QMA).31 December 203403912855-13-24541-amino-3-aminomethyl-3,5,5- trimethylcyclohexaneMonomer or other reactantAll30031 December 203403922867-47-2455methacrylic acid, 2-(dimethylamino)-ethyl esterMonomer or other reactantAll0,131 December 203403932998-08-5456acrylic acid, sec-butyl esterMonomer or other reactantAll(21)31 December 202803942998-18-7457methacrylic acid, sec-butyl esterMonomer or other reactantAll(22)31 December 202803953061-75-4458behenamideAdditive or polymer production aidAll31 December 203403963135-18-04593,5-di-tert-butyl-4-hydroxybenzyl-phosphonic acid, dioctadecyl esterAdditive or polymer production aidAllFor the MTCtap values of degradation products, refer to Table 4.31 December 2028

03973173-53-3460cyclohexyl isocyanateMonomer or other reactantAll(16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 203403983173-72-64611,5-naphthalene diisocyanateMonomer or other reactantAll(16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 203403993195-78-6462N-vinyl-N-methylacetamideMonomer or other reactantAll1,031 December 203404003290-92-44631,1,1-trimethylolpropane trimethacrylateAid to polymerisationAll2,531 December 203404013293-97-84642-hydroxy-4-n-hexyloxybenzophenoneAdditive or polymer production aidAll(8)31 December 2028 04023333-62-84657-[2H-naphtho-(1,2-D)triazol-2-yl]-3-phenylcoumarinAdditiveAllRequirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 202804033648-18-8466di-n-octyltin dilaurate Additive Polymer production aid All(10)31 December 202804043825-26-1468perfluorooctanoic acid, ammonium saltAdditive or polymer production aidAll (38) (39) Only to be used in repeated use articles, sintered at high temperatures.31 December 202804053864-99-14692-(2′-hydroxy–3,5′-di-tert-butylphenyl)-5-chlorobenzotriazole Additive Polymer production aid AllFor the MTCtap values of degradation products, refer to Table 4.(12)31 December 202804063896-11-54702-(2′-hydroxy-3′-tert-butyl-5′-methylphenyl)-5-chlorobenzotriazoleAdditive or polymer production aidAll(12)31 December 203404073965-55-74715-sulfoisophthalic acid, monosodium salt, dimethyl esterMonomer or other reactantAll2,531 December 2034 04084066-02-84722,2′-methylenebis(4-methyl-6-cyclohexylphenol)AdditiveAll(5)31 December 203404094074-90-2473adipic acid, divinyl esterMonomer or other reactantAll0,1 Maximum residual content in the final material (QM) = 5 mg/kg in the product. Only to be used as co-monomer. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 202804104098-71-94751-isocyanato-3-isocyanatomethyl- 3,5,5-trimethylcyclohexaneMonomer or other reactantAll(16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 04114128-73-8476diphenylether–4,4′-diisocyanateMonomer or other reactantAll(16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 202804124130-42-14772,6-di-tert-butyl-4-ethylphenol Polymer production aid Other (processing aid) All240For the MTCtap values of degradation products, refer to Table 4.Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method.31 December 202804134191-73-54784-hydroxybenzoic acid, isopropyl esterAdditive or polymer production aidAll31 December 203404144196-95-6479azelaic anhydrideMonomer or other reactantAll31 December 202804154221-80-14803,5-di-tert-butyl-4-hydroxybenzoic acid, 2,4-di-tert-butylphenyl esterAdditive or polymer production aidAllFor the MTCtap values of degradation products, refer to Table 4.31 December 2034

04164422-95-14811,3,5-benzenetricarboxylic acid trichlorideMonomer or other reactantAll2,5 - expressed as 1,3,5-benzenetricarboxylic acid31 December 203704174655-34-9482methacrylic acid, isopropyl esterMonomer or other reactantAll(22)31 December 202804184724-48-5483n-octylphosphonic acidAdditive or polymer production aidAll2,531 December 203404194767-03-74842,2-bis(hydroxymethyl)propionic acidMonomer or other reactantAll2,5 Verification of compliance by residual content per drinking water contact surface area (QMA) pending the availability of an analytical method. When used for coatings, only as monomer for polymeric additives. 31 December 2034 04205124-30-1485dicyclohexylmethane–4,4′-diisocyanateMonomer or other reactantAll(16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 203404215136-44-7486ethylene-N-palmitamide-N′-stearamideAdditive or polymer production aidAll31 December 202804225232-99-54872-cyano–3,3-diphenylacrylic acid, ethyl ester Additive Polymer production aid All2,531 December 203404235518-18-3488N,N′-ethylenebispalmitamideAdditive or polymer production aidAll31 December 2028 04245873-54-1490diphenylmethane–2,4′-diisocyanateMonomer or other reactantAll(16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 203404256182-11-24911,2-propyleneglycol distearateAdditive or polymer production aidAll31 December 202804266197-30-44922-cyano–3,3-diphenylacrylic acid, 2-ethylhexyl esterAdditive or polymer production aidAll2,531 December 203404276200-40-4493bis(2-hydroxyethyl)-2-hydroxypropyl-3-(dodecyloxy)methylammonium chlorideAdditive or polymer production aidAll9031 December 202804286303-21-5494hypophosphorous acid Additive Polymer production aid All31 December 203404296642-31-54956-amino–1,3-dimethyluracilAdditive or polymer production aidAll25031 December 2034 04306683-19-8496pentaerythritol tetrakis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)-propionate] Additive Polymer production aid AllFor the MTCtap values of degradation products, refer to Table 4.31 December 203404316846-50-04972,2,4-trimethyl–1,3-pentanediol diisobutyrate Additive Polymer production aid Coatings250Only to be used in coatings.31 December 203404326864-37-54983,3′-dimethyl–4,4′-diaminodicyclohexylmethaneMonomer or other reactantPlastics2,5Only to be used in polyamides.31 December 203404336915-15-7499malic acid Monomer or other reactant Other (processing aid) AllIn case of use as a monomer only to be used as a co-monomer in aliphatic polyesters up to maximum level of 1 % on a molar basis, except when used for coatings.31 December 203404347128-64-55002,5-bis(5-tert-butyl-2-benzoxazolyl)thiophene Additive Polymer production aid All30Requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex 1 of Commission Implementing Decision (EU) 2024/368.31 December 2034

04357456-68-05024,4′-oxybis(benzenesulfonyl azide)Monomer or other reactantAll2,531 December 203404367585-39-9503β-dextrinAdditive or polymer production aidAll31 December 203404377631-90-5505sodium bisulfiteAdditive or polymer production aidAll(18)31 December 203404387632-00-0506sodium nitriteAdditive or polymer production aidAll3031 December 203404397647-01-0507hydrochloric acid Additive or polymer production aid Other (processing aid) All31 December 203404407647-15-6508sodium bromideAdditive or polymer production aidAll31 December 203404417664-38-2509phosphoric acid Monomer or other reactant Polymer production aid AllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2034 04427664-41-7510ammonia Monomer or other reactant Other (processing aid) AllFor ammonium, refer to Annex V.31 December 203704437681-11-0512potassium iodideAdditive or polymer production aidAll(6)31 December 203404447681-82-5513sodium iodideAdditive or polymer production aidAll(6)31 December 203404457757-83-7516sodium sulfiteAdditive or polymer production aidAll(18)If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 203404467758-02-3517potassium bromideAdditive or polymer production aidAll31 December 203404477782-42-5521graphiteAdditiveAllPolycyclic aromatic hydrocarbons MTCtap = 0,1 μg/lGraphites according to EUPL Number 2039, Annex IV.31 December 2034 04487782-50-5522chlorineMonomer or other reactantAll31 December 203404497787-70-4523copper bromideAdditive or polymer production aidAll (6) For copper, refer to Annex V. 31 December 203404508001-22-7524soybean oil Monomer or other reactant Other (processing aid) All31 December 202804518001-39-6525Japan waxAdditive or polymer production aidAll31 December 202804528001-75-0526ceresinAdditive or polymer production aidAll31 December 202804538001-79-4527castor oilMonomer or other reactant (base oil)All31 December 202804548002-43-5528lecithin Additive Polymer production aid Other (processing aid) All31 December 203704558002-53-7529montan wax Additive Polymer production aid All31 December 203404568006-44-8530candelilla waxAdditive or polymer production aidAll31 December 2028 04578012-89-3531beeswaxAdditive or polymer production aidAll31 December 203704588013-07-8532soybean oil, epoxidised Monomer or other reactant Other (processing aid) All1500(31)Oxirane < 8 %, iodine number < 6.31 December 203404598015-86-9533carnauba wax Additive Polymer production aid Other (processing aid) All31 December 202804608017-16-1534polyphosphoric acids Monomer or other reactant Additive Polymer production aid AllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 203404618050-09-7535rosin

Monomer or other reactant Additive Polymer production aid Other (processing aid) All31 December 2034 04628050-15-5536rosin, hydrogenated, ester with methanolAdditiveAll, except rubber31 December 203404638050-26-8537rosin, ester with pentaerythritolAdditive or polymer production aidAll31 December 203404648050-31-5538rosin, ester with glycerolOther (processing aid)All31 December 203404658052-10-6539rosin tall oil Monomer or other reactant Other (processing aid) All31 December 202804668062-15-5540lignosulfonic acidAdditive or polymer production aidPlastics12Only to be used as dispersant for plastics dispersions.31 December 202804679000-01-5541gum arabicAdditive or polymer production aidAll31 December 202804689000-11-7542carboxymethylcelluloseAdditive or polymer production aidAll31 December 202804699000-16-2543dammarAdditive or polymer production aidAll31 December 202804709000-30-0544guar gumAdditive or polymer production aidAll31 December 2037 04719000-65-1545tragacanth gumAdditive or polymer production aidAll31 December 203704729000-69-5546pectinAdditive or polymer production aidAll31 December 203704739000-70-8547gelatinAdditive or polymer production aidAll31 December 202804749000-71-9548caseinAdditive or polymer production aidAll31 December 202804759002-88-4549polyethylene wax Monomer or other reactant (base oil) Additive Polymer production aid Other (processing aid) All31 December 203404769003-07-0550polypropylene wax Polymer production aid Other (processing aid) All31 December 203404779003-39-8552polyvinylpyrrolidoneMonomer or other reactantAllThe substance shall meet the purity criteria as laid down in Commission Directive 2008/84/EC.31 December 2037 04789004-34-6553cellulose Monomer or other reactant Additive All31 December 203704799004-36-8554cellulose acetate butyrateAdditive or polymer production aidAll31 December 202804809004-57-3555ethylcellulose Monomer or other reactant Additive All31 December 202804819004-58-4556ethylhydroxyethylcelluloseAdditive or polymer production aidAll31 December 202804829004-59-5557methylethylcelluloseAdditive or polymer production aidAll31 December 202804839004-62-0558hydroxyethylcellulose Additive Polymer production aid All31 December 202804849004-64-2559hydroxypropylcelluloseAdditive or polymer production aidAll31 December 202804859004-65-3560methylhydroxypropylcelluloseAdditive or polymer production aidAll31 December 202804869004-67-5561methylcellulose Polymer production aid Additive All31 December 202804879004-70-0562nitrocelluloseMonomer or other reactantAll31 December 2028 04889004-97-1563polyethyleneglycol monoricinoleateAdditive or polymer production aidAll210031 December 202804899005-25-8564starch, edibleMonomer or other reactantAll31 December 202804909005-27-0565hydroxyethyl starchAdditive or polymer production aidAll31 December 202804919005-32-7566alginic acidAdditive or polymer production aidAll31 December 203704929005-37-25671,2-propyleneglycol alginateAdditive or polymer production aidAll31 December 202804939005-64-5568polyethyleneglycol sorbitan monolaurateOther (processing aid)All31 December 203404949005-65-6569polyethyleneglycol sorbitan monooleateOther (processing aid)All31 December 203404959005-66-7570polyethyleneglycol sorbitan monopalmitateAdditive or polymer production aidAll31 December 203404969005-67-8571polyethyleneglycol sorbitan monostearateOther (processing aid)All31 December 203404979005-70-3572polyethyleneglycol sorbitan trioleateAdditive or polymer production aidAll31 December 2037

04989005-71-4573polyethyleneglycol sorbitan tristearateAdditive or polymer production aidAll31 December 203704999006-04-6574rubber, natural Monomer or other reactant Additive AllAt recovery and coagulation of the natural rubber, ammonia, formic acid, acetic acid and sodium bisulfite may be used. Other additives of the natural rubber must be listed in the positive list.31 December 202805009032-42-2576hydroxyethylmethylcelluloseAdditive or polymer production aidAll31 December 202805019044-17-1577isobutylene-butene copolymerAdditive or polymer production aidAll31 December 203705029046-01-9578polyethyleneglycol tridecyl ether phosphateAdditive or polymer production aidAll250Polyethyleneglycol (EO < 11) tridecyl ether phosphate (mono-and dialkyl ester) with a maximum 10 % content of polyethyleneglycol (EO < 11) tridecylether.31 December 202805039049-76-7579hydroxypropyl starchAdditive or polymer production aidAll31 December 2028 050410016-20-3580α-dextrinAdditive or polymer production aidAll31 December 2037050510022-31-8581barium nitrateAdditive or polymer production aidAllFor barium, refer to Annex V.If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2034050610039-33-5582di-n-octyltin bis(2-ethylhexyl maleate)Additive or polymer production aidAll(10)31 December 2034050710043-11-5583boron nitrideAdditiveAllFor boron, refer to Annex V.If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2037050810043-35-3584boric acid Monomer or other reactant Additive AllFor boron, refer to Annex V.31 December 2028 050910094-45-8587octadecylerucamideAdditive or polymer production aidAll25031 December 2034051010436-08-5589cis-11-eicosenamideAdditive or polymer production aidAll31 December 2028051110595-80-9590methacrylic acid, 2-sulfoethyl esterMonomer or other reactantAll0,1Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method.31 December 2034051210605-09-1591ascorbyl stearateAdditive or polymer production aidAll31 December 2028051311097-59-9592aluminium magnesium carbonate hydroxideAdditiveAllFor aluminium, refer to Annex V.If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2034051411132-73-3595lignocelluloseMonomer or other reactantAll31 December 2028 051511138-66-2596xanthan gum Additive Polymer production aid All31 December 2037051612001-26-2597micaAdditiveAllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028051712007-55-5599barium tetraborateAdditive or polymer production aidAllFor barium and boron, refer to Annex V.31 December 2028051812072-90-1600hydromagnesiteAdditive or polymer production aidAllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028

051912124-97-9601ammonium bromideAdditive or polymer production aidAllFor ammonium, refer to Annex V.31 December 2028052012198-93-5602ozokeriteAdditive or polymer production aidAll31 December 2028052112269-78-2603pyrophylliteAdditive or polymer production aidAllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028052212304-65-3604hydrotalciteAdditive or polymer production aidAllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028 052312542-30-2605acrylic acid, dicyclopentenyl esterMonomer or other reactantAll2,5Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method.31 December 2034052413003-12-86084,4′-butylidene-bis(6-tert-butyl-3- methylphenyl-ditridecyl phosphite)Additive or polymer production aidAll30031 December 2034052513445-56-2609pyrophosphorous acidAdditive or polymer production aidAll31 December 2028052613560-49-16113-aminocrotonic acid, diester with thiobis (2-hydroxyethyl) etherAdditive or polymer production aidAll31 December 2028052713811-50-2612N,N′-divinyl-2-imidazolidinoneMonomer or other reactantAll2,5Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water.31 December 2034 052813983-17-0613wollastoniteAdditive or polymer production aidAllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028052914464-46-1614cristobaliteAdditive or polymer production aidAllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028053014807-96-6615talc Additive Polymer production aid AllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2037 053114808-60-7616quartz Additive Polymer production aid AllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2034053215214-89-86172-acrylamido-2-methylpropanesul phonic acidMonomer or other reactantAll2,531 December 2034053315535-79-2618di-n-octyltin mercaptoacetateAid to polymerisationAll(10)31 December 2034053415571-58-1619di-n-octyltin bis(2-ethylhexyl mercaptoacetate)Aid to polymerisationAll(10)31 December 2028053515571-60-5620di-n-octyltin dimaleateAdditive or polymer production aidAll(10)31 December 2028

053616219-75-36215-ethylidenebicyclo[2,2,1]hept-2-eneMonomer or other reactantAll2,5Verification of compliance by residual content per water contact surface area (QMA) pending the availability of analytical method for migration testing. It can only be used for products with a CF (S/V ratio) of ≤ 2dm-1.31 December 2034053716260-09-6622oleylpalmitamideAdditive or polymer production aidAll25031 December 2034053816389-88-1623dolomiteAdditive or polymer production aidAllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028053916712-64-46246-hydroxy-2-naphthalenecarboxylic acidMonomer or other reactantAll2,531 December 2034054018641-57-1626glycerol tribehenateAdditive or polymer production aidAll31 December 2028 054119569-21-2627huntiteAdditive or polymer production aidAll31 December 2028054220427-58-1628zinc hydroxideAdditive or polymer production aidAllFor zinc, refer to Annex V.If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2034054321645-51-2629aluminium hydroxideAdditiveAllFor aluminium, refer to Annex V.If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2034054422788-19-86301,2-propyleneglycol dilaurateAdditive or polymer production aidAll31 December 2028 054523128-74-76311,6-hexamethylene-bis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionamide) Additive Polymer production aid All2250For the MTCtap values of degradation products, refer to Table 4.31 December 2034054623676-09-76324-ethoxybenzoic acid, ethyl esterAdditive or polymer production aidAll18031 December 2028054723949-66-86332-ethoxy-2′-ethyloxanilideAdditive or polymer production aidAll150031 December 2034054824800-44-0634tripropyleneglycolMonomer or other reactantAll31 December 2034054925134-51-4636acrylic acid, acrylic acid, 2-ethylhexyl ester, copolymerAdditive or polymer production aidAll2,5 - expressed as acrylic acid, 2-ethylhexyl ester(21)31 December 2037055025151-96-6637pentaerythritol dioleateAdditive or polymer production aidAll2,531 December 2034055125322-69-4639polypropyleneglycol Monomer or other reactant Aid to polymerisation All31 December 2034055225359-91-5640formaldehyde-1-naphthol, copolymerAdditive or polymer production aidAll2,531 December 2034 055325736-61-2642maleic anhydride-styrene, copolymer, sodium saltAdditive or polymer production aidAllThe fraction with molecular weight below 1000 Da shall not exceed 0,05 % (w/w).31 December 2037055426266-57-9643sorbitan monopalmitate Additive Polymer production aid All31 December 2034055526266-58-0644sorbitan trioleateAdditive or polymer production aidAll31 December 2034055626401-86-5645mono-n-octyltin tris(isooctyl mercaptoacetate)Additive or polymer production aidAll(11)31 December 2034055726401-97-8646di-n-octyltin bis(isooctyl mercaptoacetate)Additive or polymer production aidAll(10)31 December 2034055826402-23-3647glycerol monohexanoateAdditive or polymer production aidAll31 December 2028055926402-26-6648glycerol monooctanoateAdditive or polymer production aidAll31 December 2034056026427-07-6649dibutylthiostannoic acid polymerAdditive or polymer production aidAllMolecular unit = (C8H18S3Sn2)n (n = 1,5-2).31 December 2034056126636-01-1650dimethyltin bis(isooctyl mercaptoacetate)Additive or polymer production aidAll(9)31 December 2028

056226658-19-5651sorbitan tristearateAdditive or polymer production aidAll31 December 2034056326741-53-7652bis(2,4-di-tert-butylphenyl) pentaerythritol diphosphiteAdditive or polymer production aidAll30For the MTCtap values of degradation products, refer to Table 4.31 December 2034056426747-90-06532,4-toluene diisocyanate dimerMonomer or other reactantAll(16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034056526836-47-5654sorbitol monostearateAdditive or polymer production aidAll31 December 2028056626896-48-0655tricyclodecanedimethanolMonomer or other reactantAll2,531 December 2034056726914-43-2656styrenesulfonic acidMonomer or other reactantAll2,531 December 2028 056827107-89-7657mono-n-octyltin tris(2-ethylhexyl mercaptoacetate)Aid to polymerisationAll(11)31 December 2034056927176-87-0658dodecylbenzenesulfonic acidMonomer or other reactantAll150031 December 2034057027194-74-76591,2-propyleneglycol monolaurateAdditive or polymer production aidAll31 December 2034057127458-90-8660di-tert-dodecyl disulfideAdditive or polymer production aidAll2,531 December 2034057227676-62-66611,3,5-tris(3,5-di-tert-butyl-4-hydroxybenzyl)-1,3,5-triazine-2,4,6(1H,3H,5H)-trioneAdditive or polymer production aidAll250For the MTCtap values of degradation products, refer to Table 4.31 December 2034057327955-94-86621,1,1-tris(4-hydroxyphenol)ethaneMonomer or other reactantPlastics0,25Only to be used in polycarbonates, except when used for coatings.31 December 2034057428290-79-1663linolenic acidMonomer or other reactantAll31 December 2028057528931-67-1664trimethylolpropane trimethacrylate-methyl methacrylate copolymerAdditive or polymer production aidAll31 December 2037 057629013-28-36651,2-propyleneglycol monopalmitateAdditive or polymer production aidAll31 December 2028057729116-98-1666sorbitan dioleateAdditive or polymer production aidAll31 December 2028057829204-02-2667gadoleic acid Monomer or other reactant Other (processing aid) All31 December 2028057929894-35-7668polyglycerol ricinoleateAdditive or polymer production aidAll31 December 2037058030233-64-8669glycerol monobehenateAdditive or polymer production aidAll31 December 2034058130899-62-8670glycerol monolaurate diacetateAdditive or polymer production aidAll(31)31 December 2034058231570-04-4671phosphorous acid, tris(2,4-di-tert-butylphenyl)ester Additive Polymer production aid AllFor the MTCtap values of degradation products, refer to Table 4.31 December 2034058331831-53-5672polyester of 1,4-butanediol with caprolactoneAdditive or polymer production aidAll (28) (29) The fraction with molecular weight below 1000 Da shall not exceed 0,5 % (w/w).31 December 2034 058432509-66-3673ethylene glycol bis[3,3-bis(3-tert-butyl-4-hydroxyphenyl)butyrate]Additive or polymer production aidAll30031 December 2034058532647-67-9674dibenzylidene sorbitolAdditive or polymer production aidAll31 December 2034058632687-78-8675N,N′-bis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionyl)hydrazideAdditiveAll750For the MTCtap values of degradation products, refer to Table 4.31 December 2034058733568-99-9676di-n-octyltin bis(isooctyl maleate)Additive or polymer production aidAll(10)31 December 2028058833587-20-16771,2-propyleneglycol dipalmitateAdditive or polymer production aidAll31 December 2028058935074-77-26781,6-hexamethylene-bis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate)AdditiveAll300For the MTCtap values of degradation products, refer to Table 4.31 December 2034059035958-30-66791,1-bis(2-hydroxy–3,5-di-tert-butylphenyl)ethaneAdditive or polymer production aidAll25031 December 2028

059136443-68-2680triethyleneglycol bis[3-(3-tert-butyl-4-hydroxy-5-methylphenyl)propionate]Additive or polymer production aidAll45031 December 2034059236653-82-46811-hexadecanolMonomer or other reactantAll31 December 2034059337205-99-5682ethylcarboxymethylcelluloseAdditive or polymer production aidAll31 December 2028059437206-01-2683methylcarboxymethylcelluloseAdditive or polymer production aidAll31 December 2028059537244-96-5684nepheline syeniteAdditive or polymer production aidAllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028059637296-97-2685silicic acid, magnesium-sodium-fluoride saltAdditiveAllFor fluoride, refer to Annex V. Only to be used in multi-layer materials for layers not coming into direct contact with drinking water, ecxept when used for coatings. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 059737353-59-6686hydroxymethylcelluloseAdditive or polymer production aidAll31 December 2028059838103-06-96872,2-bis(4-hydroxyphenyl)propane bis(phthalic anhydride)Monomer or other reactantAll2,531 December 2034059938613-77-3688tetrakis(2,4-di-tert-butyl-phenyl)-4,4′-biphenylylene diphosphonite Additive Polymer production aid All90031 December 2028060040601-76-16891,3,5-tris(4-tert-butyl-3-hydroxy-2,6-dimethylbenzyl)-1,3,5-triazine-2,4,6(1H,3H,5H)-trioneAdditive or polymer production aidAll30031 December 2034 060141484-35-9690thiodiethanol bis(3-(3,5-di-tert-butyl-4-hydroxy phenyl)propionate)AdditiveAll120For the MTCtap values of degradation products, refer to Table 4.31 December 2034060247465-97-46913,3-bis(3-methyl-4-hydroxyphenyl)2-indolinoneMonomer or other reactantAll9031 December 2028060352047-59-36922-(4-dodecylphenyl)indoleAdditive or polymer production aidAll3,031 December 2028060454140-20-4693sorbitan tripalmitateAdditive or polymer production aidAll31 December 2028060554276-35-6694methacrylic acid, sulfopropyl esterMonomer or other reactantAll2,5Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method.31 December 2028060654849-38-6695monomethyltin tris(isooctyl mercaptoacetate)Additive or polymer production aidAll(9)31 December 2028 060757569-40-1696terephthalic acid, diester with 2,2′-methylenebis(4-methyl-6-tert-butylphenol)Additive or polymer production aidAll(13)31 December 2028060857583-34-3697monomethyltin tris(ethylhexyl mercaptoacetate)Additive or polymer production aidAll(9)31 December 2028060957583-35-4698dimethyltin bis(ethylhexyl mercaptoacetate)Additive or polymer production aidAll(9)31 December 2028061058446-52-9699stearoylbenzoylmethaneAdditive or polymer production aidAll31 December 2028061161167-58-6700acrylic acid, 2-tert-butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl esterAdditive or polymer production aidAll30031 December 2034061261269-61-2701N,N′-bis(2,2,6,6-tetramethyl-4-piperidyl)hexamethylenediamine-1,2-dibromoethane, copolymerAdditive or polymer production aidAll12031 December 2037061361752-68-9702sorbitan tetrastearateAdditive or polymer production aidAll31 December 2028

061461788-47-4703fatty acids, coco Monomer or other reactant Other (processing aid) All31 December 2028061561788-85-0704polyethyleneglycol ester of hydrogenated castor oil Additive Polymer production aid Other (processing aid) All31 December 2034061661788-89-4705acids, fatty, unsaturated (C18), dimers, non hydrogenated, distilled and non-distilled Monomer or other reactant Other (processing aid) All(17)Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method.31 December 2034061761790-12-3706fatty acids, tall oilMonomer or other reactantAll31 December 2028061861790-53-2707diatomaceous earthAdditive or polymer production aidAllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028 061961791-12-6708polyethyleneglycol ester of castor oil Additive Polymer production aid Other (processing aid) All210031 December 2034062062568-11-0709sorbitan monobehenateAdditive or polymer production aidAll31 December 2028062163397-60-4710bis(2-carbobutoxyethyl)tin-bis(isooctyl mercaptoacetate)Additive or polymer production aidAll90031 December 2028062263438-80-2711(2-carbobutoxyethyl)tin-tris(isooctyl mercaptoacetate)Additive or polymer production aidAll150031 December 2028062364147-40-6712castor oil, dehydratedMonomer or other reactant (base oil)All31 December 20340624 64365-11-3 7440-44-0 713charcoal, activatedAdditive or polymer production aidPlastics Only for use in PET at maximum 10 mg/kg of polymer. Same purity requirements as for Vegetable Carbon (E 153) set out by Commission Regulation (EU) No 231/2012 with exception of ash content which can be up to 10 % (w/w). 31 December 2028 062564365-17-9714rosin, hydrogenated, ester with pentaerythritolAdditive or polymer production aidAll31 December 2034062665140-91-27153,5-di-tert-butyl-4-hydroxybenzyl phosphonic acid, monoethyl ester, calcium saltAdditive or polymer production aidAll300For the MTCtap values of degradation products, refer to Table 4.31 December 2034062765447-77-07161-(2-hydroxyethyl)-4-hydroxy-2,2,6,6-tetramethyl piperidine-succinic acid, dimethyl ester, copolymerAdditive or polymer production aidAll150031 December 2037062865997-06-0717rosin, hydrogenatedAdditiveAll, except rubber31 December 2034062965997-13-9718rosin, hydrogenated, ester with glycerolAdditive or polymer production aidAll31 December 2034063066822-60-4719N-methacryloyloxyethyl-N,N-dimethyl-N-carboxymethyl-ammonium chloride, sodium salt-octadecyl methacrylate-ethyl methacrylate-cyclohexyl methacrylate-N-vinyl-2-pyrrolidone, copolymersAdditive or polymer production aidAll31 December 2037 063167649-65-4720mono-n-dodecyltin tris(isooctyl mercaptoacetate)Additive or polymer production aidAll(24)31 December 2028063267845-93-67213,5-di-tert-butyl-4-hydroxybenzoic acid, hexadecyl esterAdditive or polymer production aidAllFor the MTCtap values of degradation products, refer to Table 4.31 December 2034063368308-53-2722fatty acids, soyaMonomer or other reactant (base oil)All31 December 2028063468412-29-3723starch, hydrolysedAdditive or polymer production aidAll31 December 2028063568425-17-2724syrups, hydrolysed starch, hydrogenatedMonomer or other reactantAllIn compliance with the purity criteria for maltitol syrup E 965(ii) as laid down in Commission Directive 2008/60/EC.31 December 2034063668442-12-6726Reaction products of oleic acid, 2-mercaptoethyl ester, with dichlorodimethyltin, sodium sulfide and trichloromethyltinAdditive or polymer production aidAll(9)31 December 2028

063768442-85-3727cellulose, regenerated Monomer or other reactant Additive All31 December 20280638 68515-49-1 26761-40-0 729phthalic acid, diesters with primary, saturated C9-C11 alcohols more than 90 % C10 (DNIP) Additive Polymer production aid All (25) (31) Only to be used as: (a) plasticiser; or (b) technical support agent in concentrations up to 0,1 % in the product. Not to be used in combination substances with EUPL Numbers 0103, 0105, 0225 or Diisobutyl phthalate (synonyms 1,2-bis(2-methylpropyl) benzene–1,2-dicarboxylate or DIBP) with CAS Number 84-69-5. 31 December 2037063968554-70-1730methylsilsesquioxane Monomer or other reactant (base oil) Additive Polymer production aid AllResidual monomer in methylsilsesquioxane: < 1 mg methyltrimethoxysilane/kg of methylsilsesquioxane.31 December 2028 064068564-88-5731N-heptylaminoundecanoic acidMonomer or other reactantAll2,531 December 2034064168610-51-5732p-cresol-dicyclopentadiene-isobutylene, copolymerAdditive (polymeric)All25031 December 2034064268783-41-5733acids, fatty, unsaturated (C18), dimers, hydrogenated, distilled and non-distilled Monomer or other reactant Other (processing aid) All(17)Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method.31 December 2034064368951-50-8735bis(polyethyleneglycol)hydroxymethylphosphonateAdditive or polymer production aidAll3031 December 2028064469226-44-4736di-n-octyltin ethyleneglycol bis(mercaptoacetate)Additive or polymer production aidAll(10)31 December 2037064570142-34-6737polyethyleneglycol-30 dipolyhydroxystearateAdditive or polymer production aidAll31 December 2034064670321-86-77382-[2-hydroxy–3,5-bis(1,1-dimethylbenzyl)phenyl]benzotriazoleAdditive or polymer production aidAll7531 December 2034 064770331-94-17392,2′-oxamidobis[ethyl-3-(3,5-di-tert-butyl-4-hydroxyphenyl)-propionate]Additive or polymer production aidAllFor the MTCtap values of degradation products, refer to Table 4.31 December 2034064871878-19-8740poly[6-[(1,1,3,3-tetramethyl-butyl)amino]-1,3,5-triazine–2,4-diyl]-[(2,2,6,6-tetramethyl-4-piperidyl)-imino]hexamethylene[(2,2,6,6-tetramethyl-4-piperidyl) imino] Additive Polymer production aid All15031 December 2028064978301-43-67422,2,4,4-tetramethyl-20-(2,3-epoxy propyl)-7-oxa–3,20-diazadispiro-[5.1.11.2]-heneicosan-21-one, polymerAdditive or polymer production aidAll25031 December 2037065079072-96-1743bis(4-ethylbenzylidene)sorbitolAdditive or polymer production aidAll31 December 2034 065180181-31-37443-hydroxybutanoic acid-3-hydroxypentanoic acid, copolymerMonomer or other reactantAll(34)The substance is used as product obtained by bacterial fermentation. In compliance with the specifications mentioned in the Table 4 of Annex I of Commission Regulation (EU) No 10/2011.31 December 2028065280410-33-97452,2′,2′-nitrilo(triethyl tris(3,3′,5,5′-tetra-tert-butyl-1,1′-bi-phenyl-2,2′-diyl)phosphite)Additive or polymer production aidAll250 - expressed as sum of phosphite and phosphateFor the MTCtap values of degradation products, refer to Table 4.31 December 2034065380693-00-1746bis(2,6-di-tert-butyl-4-methylphenyl)pentaerythritol diphosphiteAdditive or polymer production aidAll250 - expressed as sum of phosphite and phosphateFor the MTCtap values of degradation products, refer to Table 4.31 December 2034065484030-61-5747di-n-dodecyltin bis(isooctyl mercaptoacetate)Additive or polymer production aidAll(24)31 December 2028065584434-12-8748N-(2-aminoethyl)-β-alanine, sodium saltMonomer or other reactantAll2,531 December 2028

065685209-91-27492,2′-methylene bis(4,6-di-tert-butylphenyl) sodium phosphateAdditive or polymer production aidAll250For the MTCtap values of degradation products, refer to Table 4.31 December 2034065785209-93-47502,2′-methylenebis(4,6-di-tert-butylphenyl) lithium phosphateAdditive or polymer production aidAll250For lithium, refer to Annex V.31 December 2028065887189-25-1751poly(zinc glycerolate)Additive or polymer production aidAllFor zinc, refer to Annex V.31 December 20340659 87826-41-3 69158-41-4 54686-97-4 81541-12-0 752bis(methylbenzylidene)sorbitolAdditive or polymer production aidAll31 December 2037066092704-41-1753kaolin, calcinedAdditiveAllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2034066199880-64-5754glycerol dibehenateAdditive or polymer production aidAll31 December 2028 0662106246-33-77554,4′-methylenebis(3-chloro–2,6-diethylaniline)Monomer or other reactantAll2,5Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method.31 December 20340663110553-27-07562,4-bis(octylthiomethyl)-6-methyllphenolAdditiveAll(23)31 December 20340664110638-71-6757vermiculite, reaction product with citric acid, lithium saltAdditive or polymer production aidAllFor lithium, refer to Annex V.31 December 20340665110675-26-87582,4-bis(dodecylthiomethyl)-6-methylphenolAdditive or polymer production aidAll(23)31 December 20340666118337-09-07592,2′-ethylidenebis(4,6-di-tert-butylphenyl) fluorophosphoniteAdditive or polymer production aidAll30031 December 20370667119345-01-6760Reaction product of di-tert-butylphosphonite with biphenyl, obtained by condensation of 2,4-di-tert-butylphenol with Friedel Craft reaction product of phosphorous trichloride and biphenylAdditive or polymer production aidAll900For the MTCtap values of degradation products, refer to Table 4. Composition: 4,4′-biphenylene-bis[0,0-bis(2,4-di-tert-butylphenyl)phosphonite] (CAS No. 38613-77-3) (36-46 % w/w ()), 4,3′-biphenylene-bis[0,0-bis(2,4-di-tert-butylphenyl)phosphonite] (CAS No. 118421-00-4) (17-23 % w/w ()), 3,3′-biphenylene-bis[0,0-bis(2,4-di-tert-butylphenyl)phosphonite] (CAS No. 118421-01-5) (1-5 % w/w ()), 4-biphenylene–0,0-bis(2,4-di-tert-butylphenyl)phosphonite (CAS No. 91362-37-7) (1119 % w/w ()), Tris(2,4-di-tert-butylphenyl)phosphite (CAS No. 31570-04-4) (9-18 % w/w ()), 4,4′-biphenylene–0,0-bis(2,4-di-tert-butylphenyl)phosphonate-0,0-bis(2,4-di-tert-butylphenyl)phosphonite (CAS No. 112949-97-0) (< 5 % w/w ()) () Quantity of substance used/ quantity of formulation. Other specifications: Phosphor content of min. 5,4 % to max. 5,9 %, Acid value of max. 10 mg KOH per gram, Melt range of 85– 110 °C. 31 December 2034 0668120218-34-0761thiodiethanolbis(5-methoxycarbonyl–2,6-dimethyl–1,4-dihydropyridine-3-carboxylate)Additive or polymer production aidAll30031 December 20370669123968-25-2762acrylic acid, 2,4-di-tert-pentyl-6-(1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl)phenyl esterAdditive or polymer production aidAll25031 December 20340670129228-21-37633,3-bis(methoxymethyl)–2,5-dimethylhexaneAdditive or polymer production aidAll2,531 December 20340671132459-54-2764N,N′-bis[4-(ethoxycarbonyl)phenyl]-1,4,5,8-naphthalenetetracarboxydiimideMonomer or other reactantPlastics2,5

Purity > 98,1 % (w/w). Only to be used as co-monomer (max 4 %) for polyesters (PET, PBT). 31 December 20280672134701-20-57652,4-dimethyl-6-(1-methylpentadecyl)phenolAdditive or polymer production aidAll5031 December 20340673135861-56-2766bis(3,4-dimethylbenzylidene)sorbitolAdditive or polymer production aidAll31 December 2034 0674136504-96-67671,2-bis(3-aminopropyl)ethylene diamine, polymer with N-butyl-2,2,6,6-tetramethyl-4-piperidinamine and 2,4,6-trichloro-1,3,5-triazineAdditive or polymer production aidAll25031 December 20340675143925-92-2768amines, bis(hydrogenated tallow alkyl) oxidisedAdditive or polymer production aidPlastics Only to be used in: (a) polyolefins at 0,1 % (w/w) concentration; or (b) PET at 0,25 % (w/w) concentration. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 20340676145650-60-8769phosphorous acid, bis(2,4-di-tert-butyl-6-methylphenyl) ethyl esterAdditive or polymer production aidAll250 - expressed as sum of phosphite and phosphate31 December 2034 0677147315-50-27702-(4,6-diphenyl-1,3,5-triazin-2-yl)-5-(hexyloxy)phenolAdditive or polymer production aidAll2,531 December 20340678151841-65-5771aluminium hydroxybis [2,2′-methylenebis (4,6-di-tert-butylphenyl) phosphate]Additive or polymer production aidAll250For the MTCtap values of degradation products, refer to Table 4.For aluminium, refer to Annex V.31 December 20340679153250-52-3772N,N′-dicyclohexyl-2,6-naphthalene dicarboxamideAdditive or polymer production aidAll25031 December 20280680154862-43-8773bis(2,4-dicumylphenyl)pentaerythritol-diphosphiteAdditive or polymer production aidAll250 - expressed as sum of the substance itself, its oxidised form bis(2,4-dicumylphenyl)pentaerythritol-phosphate and its hydrolysis product (2,4-dicumylphenol)31 December 2034 0681161717-32-47742,4,6-tris(tert-butyl)phenyl-2-butyl-2-ethyl-1,3-propanediol phosphiteAdditive or polymer production aidAll100 - expressed as sum of phosphite, phosphate and the hydrolysis product = TTBP31 December 20340682166412-78-87751,2-cyclohexanedicarboxylic acid, diisononyl ester Additive Polymer production aid All(31)31 December 20340683167883-16-1776polydimethylsiloxane, 3-aminopropyl terminated, polymer with dicyclohexylmethane–4,4′- diisocyanateAdditive or polymer production aidAllThe fraction with molecular weight below 1000 Da shall not exceed 1,5 % (w/w).31 December 20340684174254-23-0777acrylic acid, methyl ester, telomer with 1-dodecanethiol, C16-C18 alkyl estersAdditive or polymer production aidAll 0,5 % in the product. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2028 0685178671-58-4778pentaerythritol tetrakis (2-cyano–3,3-diphenylacrylate)Additive or polymer production aidAll2,531 December 20340686182121-12-67799,9-bis(methoxymethyl)fluoreneAdditive or polymer production aidAll2,531 December 20340687192268-64-7780poly-[[6-[N-(2,2,6,6-tetramethyl- 4-piperidinyl)-n-butylamino]-1,3,5-triazine-2,4-diyl][(2,2,6,6-tetramethyl-4-piperidinyl)imino]-1,6-hexanediyl[(2,2,6,6-tetramethyl-4-piperidinyl)imino]]-α-[N,N,N′,N′-tetrabutyl-N"-(2,2,6,6-tetramethyl-4-piperidinyl)-N"-[6-(2,2,6,6-tetramethyl-4-piperidinylamino)-hexyl]-[1,3,5-triazine-2,4,6-triamine]-ω-N,N,N′,N′-tetrabutyl-1,3,5-triazine-2,4-diamine]Additive or polymer production aidAll25031 December 2037

0688227099-60-77811,3,5-tris(4-benzoylphenyl) benzeneAdditive or polymer production aidAll2,531 December 20280689661476-41-1782polydimethylsiloxane, 3-aminopropyl terminated, polymer with 1-isocyanato-3-isocyanatomethyl-3,5,5-trimethylcyclohexaneAdditive or polymer production aidAllThe fraction with molecular weight below 1000 Da shall not exceed 1 % (w/w).31 December 20340690736150-63-3783glycerides, castor-oil mono-, hydrogenated, acetatesAdditive or polymer production aidAll(31)31 December 20340691745070-61-57841,3,5-tris (2,2-di-methylpropanamido) benzeneAdditive or polymer production aidAll25031 December 20370692100-21-0785terephthalic acidMonomer or other reactantAll(27)31 December 20340693117-21-57863-chlorophthalic anhydrideMonomer or other reactantAll2,5 - expressed as 3-chloro-phthalic acid31 December 20340694118-45-67874-chlorophthalic anhydrideMonomer or other reactantAll2,5 - expressed as 4-chloro-phthalic acid31 December 2034 06952530-85-0788[3-(methacryloxy)propyl]trimethoxysilane Additive Polymer production aid All2,5 Only to be used as a surface treatment agent of inorganic fillers. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. Only a method of analysis for the determination of the residual monomer in the treated filler is available. 31 December 20340696106990-43-6791N,N′,N″,N″-tetrakis(4,6-bis(N-butyl-(N-methyl-2,2,6,6-tetramethylpiperidin-4-yl)amino)triazin-2-yl)-4,7-diazadecane-1,10-diamineAid to polymerisationAll2,531 December 2034 0697203255-81-67923,3′,5,5′-tetrakis(tert-butyl)-2,2′-dihydroxybiphenyl, cyclic ester with [3-(3-tert-butyl-4-hydroxy-5-methylphenyl)propyl]oxyphosphonous acidAdditive or polymer production aidAll250 - expressed as the sum of phosphite and phosphate form of the substance and the hydrolysis products31 December 20280698102-71-6793triethanolamine Monomer or other reactant Aid to polymerisation Other (processing aid) All(36)31 December 2034069979-14-1794glycolic acidMonomer or other reactantAllOnly to be used for manufacture of polyglycolic acid (PGA) for (i) indirect water contact behind polyesters such as polyethylene terephthalate (PET) or polylactic acid (PLA); and (ii) direct water contact of a blend of PGA up to 3 % w/w in PET or PLA.31 December 2037 0700124172-53-8795N,N′-bis(2,2,6,6-tetramethyl-4-piperidyl)-N,N′-diformylhexamethylenediamineAdditive or polymer production aidAll2,531 December 2034070118600-59-47962,2′-(1,4-phenylene)bis[4H-3,1-benzoxazin-4-one]Additive or polymer production aidAll2,5 - including the sum of its hydrolysis products31 December 2034070273018-26-5797polyester of adipic acid with 1,3-butanediol, 1,2-propanediol and 2-ethyl-1-hexanolAdditive or polymer production aidAll (30) (31) 31 December 203707036422-86-2798terephthalic acid, bis(2-ethylhexyl)esterAdditive or polymer production aidAll3000(31)31 December 20340704867-13-0800triethyl phosphonoacetateAdditive or polymer production aidPlasticsOnly for use in PET.31 December 20340705146340-15-0802alcohols, C12-C14 secondary, β-(2-hydroxyethoxy), ethoxylatedAdditive or polymer production aidAll25031 December 20280706152261-33-1803α-alkenes(C20-C24) copolymer with maleic anhydride, reaction product with 4-amino-2,2,6,6-tetramethylpiperidineAdditive or polymer production aidAll31 December 2034

07071010121-89-7804poly(3-nonyl–1,1-dioxo-1-thiopropane–1,3-diyl)-block-poly(x-oleyl-7-hydroxy–1,5-diiminooctane–1,8-diyl), process mixture with x = 1 and/or 5, neutralised with dodecylbenzenesulfonic acidAdditive or polymer production aidPlasticsOnly to be used as polymer production aid in polyethylene (PE), polypropylene (PP) and polystyrene (PS).31 December 203407081076-97-78061,4-cyclohexanedicarboxylic acidMonomer or other reactantPlastics250Only to be used for manufacture of polyesters.31 December 20340709807titanium nitride, nanoparticlesAdditive or polymer production aidPlastics No migration of titanium nitride nanoparticles. Only to be used in polyethylene terephthalate (PET) up to 20 mg/ kg. In the PET, the agglomerates have a diameter of 100-500 nm consisting of primary titanium nitride nanoparticles; primary particles have a diameter of approximately 20 nm. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2037 0710882073-43-0808bis(4-propylbenzylidene)propylsorbitolAdditive or polymer production aidAll250 - including the sum of its hydrolysis products31 December 20280711852282-89-4809N-(2,6-diisopropylphenyl)-6-[4-(1,1,3,3-tetramethylbutyl)phenoxy]-1H-benzo[de]isoquinolin-1,3(2H)-dioneAdditive or polymer production aidPlastics2,5Only for use in PET.31 December 2028071268441-17-8811polyethylene waxes, oxidised Additive Polymer production aid All300031 December 2034 0713124578-12-7812poly(12-hydroxystearic acid)-polyethyleneimine copolymerAdditive or polymer production aidPlastics Only to be used in plastics up to 0,1 % w/w. Prepared by the reaction of poly(12-hydroxystearic acid) with polyethyleneimine. 31 December 20370714813sulfosuccinic acid alkyl (C4-C20) or cyclohexyl diesters, salts Additive Polymer production aid All25031 December 20310715814sulfosuccinic acid monoalkyl (C10-C16) polyethyleneglycol esters, saltsAdditive or polymer production aidAll10031 December 20340716816cis–1,2-cyclohexanedicarboxylic acid, saltsAdditive or polymer production aidAll25031 December 20310717817cis-endo-bicyclo[2.2.1]heptane- 2,3-dicarboxylic acid, saltsAdditive or polymer production aidAll250Purity ≥ 96 %.31 December 20310718818methallylsulfonic acid, saltsMonomer or other reactantAll25031 December 20310719819neodecanoic acid, saltsAdditive or polymer production aidAll2,5 - expressed as neodecanoic acid31 December 2034 0720820pimelic acid, saltsAdditive or polymer production aidAll31 December 20310721821stearoyl-2-lactylic acid, saltsAdditive or polymer production aidAll31 December 20310722822perchloric acid, salts (perchlorate)Monomer or other reactantAll(37)31 December 203107238235-sulfoisophthalic acid, saltsMonomer or other reactantAll25031 December 20310724329238-24-6854perfluoro acetic acid, α-substituted with the copolymer of perfluoro–1,2-propylene glycol and perfluoro–1,1-ethylene glycol, terminated with chlorohexafluoropropyloxy groupsAdditive or polymer production aidPlastics(38)Only to be used in concentrations up to 0,5 % w/w in the polymerisation of fluoropolymers that are processed at temperatures at or above 340 °C.31 December 2028

0725855(butadiene, styrene, methyl methacrylate) copolymer cross-linked with 1,3-butanediol dimethacrylateAdditive or polymer production aidPlasticsOnly to be used in rigid poly(vinyl chloride) (PVC) for cold water applications at a maximum level of 12 %.31 December 2037072625101-28-4856(butadiene, styrene, methyl methacrylate, butyl acrylate) copolymer cross-linked with divinylbenzene or 1,3-butanediol dimethacrylateAdditive or polymer production aidPlasticsOnly to be used in rigid poly(vinyl chloride) (PVC) for cold water applications at a maximum level of 12 %.31 December 2037072737953-21-2857(methyl methacrylate, butyl acrylate, styrene, glycidylmethacrylate) copolymerAdditive or polymer production aidPlasticsOnly to be used in rigid poly(vinyl chloride) (PVC) for cold water applications at a maximum level of 2 %.31 December 2037 072890498-90-18583,9-bis[2-(3-(3-tert-butyl-4-hydroxy-5-methylphenyl)propionyloxy)-1,1-dimethylethyl]- 2,4,8,10-tetraoxaspiro[5,5]undecaneAdditive or polymer production aidAll2,5 - expressed as the sum of the substance and its oxidation product 3-[(3-(3-tert-butyl-4-hydroxy-5-methylphenyl)prop-2-enoyloxy)-1,1-dimethylethyl]-9-[(3-(3-tert-butyl-4-hydroxy-5-methylphenyl)propionyloxy)-1,1-dimethylethyl]-2,4,8,10-tetraoxaspiro[5,5]-undecane in equilibrium with its para quinone methid tautomer31 December 2037 0729859(butadiene, ethyl acrylate, methyl methacrylate, styrene) copolymer crosslinked with divinylbenzene, in nanoformAdditive or polymer production aidPlastics Only to be used as particles in non-plasticised PVC for cold water applications up to 10 % w/w in contact with water. When used together with the substance with EUPL Number 0761 and/ or the substance with EUPL Number 0767, the restriction of 10 % w/w applies to the sum of those substances. The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm. 31 December 2034073051798-33-5860perfluoro[2-(poly(n-propoxy))propanoic acid]Additive or polymer production aidPlastics(38)Only to be used in the polymerisation of fluoropolymers that are processed at temperatures at or above 265 °C.31 December 2028 073113252-13-6861perfluoro[2-(n-propoxy)propanoic acid]Additive or polymer production aidPlastics(38)Only to be used in the polymerisation of fluoropolymers that are processed at temperatures at or above 265 °C.31 December 2028073218085-02-48623,4-diacetoxy-1-buteneMonomer or other reactantPlastics2,5 - including the hydrolysis product 3,4-dihydroxy-1-butene Only to be used as a co-monomer for ethylvinylalcohol (EVOH) and polyvinylalcohol (PVOH) copolymers. Only a method for determination of the residual content of the substance in the polymer is available. 31 December 20370733646-25-38631,10-decanediamineMonomer or other reactantPlastics2,5Only to be used as a co-monomer for manufacturing polyamide articles for cold water applications.31 December 2037073456-06-48642,4-diamino-6-hydroxypyrimidineAdditive or polymer production aidPlastics250Only to be used in rigid poly(vinyl chloride) (PVC).31 December 2034

073525322-99-0865(butyl acrylate, methyl methacrylate, butyl methacrylate) copolymerAdditive or polymer production aidPlastics Only to be used in: (a) rigid poly(vinyl chloride) (PVC) for cold water application at a maximum level of 1 % w/w; (b) polylactic acid (PLA) at a maximum level of 5 % w/w. 31 December 20370736866(butyl acrylate, methyl methacrylate) copolymer, cross-linked with allyl methacrylateAdditive or polymer production aidPlasticsOnly to be used in rigid poly(vinyl chloride) (PVC) for cold water application at a maximum level of 7 %.31 December 2034073740471-03-2867(butyl methacrylate, ethyl acrylate, methyl methacrylate) copolymerAdditive or polymer production aidPlasticsOnly to be used in rigid poly(vinyl chloride) (PVC) for cold water application at a maximum level of 2 %.31 December 2037 07389010-88-2868(ethyl acrylate, methyl methacrylate) copolymerAdditive or polymer production aidPlastics Only to be used in: (a) rigid poly(vinyl chloride) (PVC) for cold water application at a maximum level of 2 % w/w; (b) polylactic acid (PLA) at a maximum level of 5 % w/w; (c) polyethylene terephthalate (PET) at a maximum level of 5 % w/w. 31 December 2037073927136-15-8869(butyl acrylate, methyl methacrylate, styrene) copolymerAdditive or polymer production aidPlasticsOnly to be used in rigid poly(vinyl chloride) (PVC) for cold water application at a maximum level of 3 %.31 December 20340740160535-46-6870N,N′,N″-tris(2-methylcyclohexyl)-1,2,3-propane-tricarboxamideAdditive or polymer production aidAll25031 December 2037 07416607-41-68722-phenyl–3,3-bis(4-hydroxyphe nyl)phthalimidineMonomer or other reactantPlastics2,5 To be used only as a co-monomer in polycarbonate copolymers. The substance contains aniline as an impurity; verification of compliance with the restriction set for primary aromatic amines in Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368 is necessary. 31 December 20340742873titanium dioxide reacted with octyltriethoxysilaneAdditive or polymer production aidAllReaction product of titanium dioxide with up to 2 % w/w surface treatment substance octyltriethoxysilane, processed at high temperatures.31 December 2037 0743156065-00-8874α-dimethyl-3-(4’-hydroxy-3’-methoxyphenyl)propylsilyloxy, w-3-dimethyl-3-(4’-hydroxy-3’-methoxyphenyl)propylsilyl polydimethylsiloxaneMonomer or other reactantPlastics2,5(32)Only to be used as comonomer in siloxane modified polycarbonate. The oligomeric mixture shall be characterised by the formula C24H38Si2O5(SiOC2H6)n (50 > n ≥ 26).31 December 2037074458128-22-6875poly(12-hydroxystearic acid) stearateAdditive or polymer production aidAll25031 December 203707453010-96-68812,2,4,4-tetramethylcyclobutane–1,3-diolMonomer or other reactantPlastics250Only for use as co-monomer at a maximum use level of 35 mole % of the diol component of polyesters.31 December 203407462416-94-68822,3,6-trimethylphenolMonomer or other reactantAll2,531 December 203407474457-71-08833-methyl–1,5-pentanediolMonomer or other reactantAll2,5Only to be used in materials in contact with water at a CF (S/V ratio) of ≤ 0,5 dm-1.31 December 2034

074891082-17-6884alkyl(C10-C21)sulfonic acid, esters with phenol Additive Polymer production aid Other (processing aid) All2,531 December 20280749263244-54-8885cyclic oligomers of (butylene terephthalate)Additive or polymer production aidPlasticsOnly to be used in poly(ethylene terephthalate) (PET), poly(butylene terephthalate) (PBT), polystyrene (PS) and rigid poly(vinyl chloride) (PVC) plastics in concentrations up to 1 % w/w for cold water applications.31 December 2034075016545-54-3894thiodipropionic acid, ditetradecyl esterAdditive or polymer production aidAll(14)31 December 20370751171090-93-08953-(3,5-di-tert-butyl-4-hydroxyphenyl)propanoic acid, esters with C13-C15 branched and linear alcohols Additive Polymer production aid Other (processing aid) Plastics, rubber2,5For the MTCtap values of degradation products, refer to Table 4.Only to be used in polyolefins.31 December 2037 0752958445-44-88963H-perfluoro-3-[(3-methoxy-propoxy)propanoic acid], ammonium saltAdditive or polymer production aidPlastics (38) For ammonium, refer to Annex V. Only to be used in the polymerisation of fluoropolymers when: processed at temperatures higher than 280 °C for at least 10 minutes, processed at temperatures higher than 190 °C up to 30 % w/w for use in blends with polyoxymethylene polymers. 31 December 2028075337486-69-49032H-perfluoro-[(5,8,11,14-tetra methyl)-tetraethyleneglycol ethyl propyl ether]Polymer production aidPlastics(38) Only to be used as a polymer production aid in the polymerisation of fluoropolymers that are (a) sintered or processed (non-sintered) at temperatures at or above 360 °C for at least 10 minutes or at higher temperatures for equivalent shorter times; (b) processed (non-sintered) at temperatures from 300 °C and up to 360 °C for at least 10 minutes. 31 December 2028 0754120-40-1923N,N-bis(2-hydroxyethyl)dodecanamideAdditive or polymer production aidAll250diethanolamine MTCtap = 15 μg/l.31 December 20370755908020-52-0926perfluoro[(2-ethyloxy-ethoxy)acetic acid], ammonium saltAdditive or polymer production aidPlastics (38) For ammonium, refer to Annex V. Only to be used in the polymerisation of fluoropolymers that are processed at temperatures higher than 300 °C for at least 10 minutes.31 December 2028075624937-78-8969ethylene-vinyl acetate copolymer waxAdditive or polymer production aidPlasticsThe migration of low molecular weight oligomeric fraction below 1000 Da shall not exceed 250 μg/l.Only to be used as a polymeric additive up to 2 % w/w in polyolefins.31 December 2034 07572459-10-1971trimethyl trimellitateMonomer or other reactantPlastics Only to be used as a co-monomer up to 0,35 % w/w to produce modified polyesters. Only a method for determination of the residual content of the substance in the polymer is available. 31 December 2037075819430-93-4973(perfluorobutyl)ethyleneMonomer or other reactantPlastics(38)Only to be used as a co-monomer up to 0,1 % w/w in the polymerisation of fluoropolymers, sintered at high temperatures.31 December 20280759979(polyethylene terephthalate, hydroxylated polybutadiene, pyromellitic anhydride) copolymerAdditive or polymer production aidPlasticsOnly to be used in polyethylene terephthalate (PET) at a maximum level of 5 % w/w.31 December 203707603634-83-19881,3-bis(isocyanatomethyl)benzeneMonomer or other reactantPlastics(33)To be used only as co-monomer in the manufacture of a middle layer coating on a poly(ethylene terephthalate) polymer film in a multilayer film.31 December 2034

0761998(butadiene, ethyl acrylate, methyl methacrylate, styrene) copolymer not cross-linked, in nanoformAdditive or polymer production aidPlastics Only to be used as particles in non-plasticised PVC up to 10 % w/w for cold water applications. When used together with the substance with EUPL Number 0729 and/ or the substance with EUPL Number 0767, the restriction of 10 % w/w applies to the sum of those substances. The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm. 31 December 20370762976-56-71007diethyl[[3,5-bis(1,1-dimethylethyl)-4-hydroxyphenyl]methyl]phosphonateAdditive or polymer production aidPlasticsFor the MTCtap values of degradation products, refer to Table 4.Only to be used up to 0,2 % (w/w) based on the final polymer weight in the polymerisation process to manufacture poly(ethylene terephthalate) (PET) and poly(ethylene 2,5-furandicarboxylate) (PEF).31 December 2034 07631016(methacrylic acid, ethyl acrylate, n-butyl acrylate, methyl methacrylate and butadiene) copolymer in nanoformAdditive or polymer production aidPlastics Only to be used up to: (a) 10 % w/w in non-plasticised PVC in cold water applications; (b) 15 % w/w in non-plasticised PLA. 31 December 2037076425618-55-71017polyglycerolAdditive or polymer production aidAllTo be processed under conditions preventing the decomposition of the substance and up to a maximum temperature of 275 °C.31 December 203707653238-40-21031furan–2,5-dicarboxylic acidMonomer or other reactantPlastics250The migration of the oligomeric fraction of less than 1000 Da shall not exceed 2,5 μg/l (expressed as furan–2,5-dicarboxylic acid).Only to be used as a monomer in the production of polyethylene furanoate. A well described method suitable to determine the oligomer migration needs to be provided to the certifying body, as well as sufficient sample for calibration upon request.31 December 2037 07663710-30-310341,7-octadieneMonomer or other reactantPlastics2,5Only to be used as a crosslinking co-monomer in the manufacture of polyolefins for cold water applications.31 December 203707671043(butadiene, ethyl acrylate, methyl methacrylate, styrene) copolymer crosslinked with 1,3-butanediol dimethacrylate, in nanoformAdditive or polymer production aidPlastics Only to be used as particles in non-plasticised PVC up to 10 % w/w for cold water applications. When used together with the substance with EUPL Number 0729 and/or the substance with EUPL Number 0761, the restriction of 10 % w/w applies to the sum of those substances. The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm. 31 December 2034 07681190931-27-11045perfluoro{acetic acid, 2-[(5- methoxy–1,3-dioxolan-4-yl)oxy]}, ammonium saltAdditive or polymer production aidPlastics (38) For ammonium, refer to Annex V. Only to be used as a polymer production aid during the manufacture of fluoropolymers under high temperature conditions of at least 370 °C.31 December 20280769624-03-31048ethylene glycol dipalmitateAdditive or polymer production aidAll(2)Only to be used when produced from a fatty acid precursor that is obtained from edible fats or oils.31 December 203407701050zinc oxide, nanoparticles, uncoatedAdditive or polymer production aidPlastics, siliconesFor zinc, refer to Annex V.

When used in plastics, only to be used in unplasticised polymers. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2037 077142774-15-21051N,N′-bis(2,2,6,6-tetramethyl-4-piperidinyl) isophthalamideAdditive or polymer production aidAll25031 December 203707721455-42-110522,4,8,10-tetraoxaspiro[5,5]undecane–3,9-diethanol,β3,β3,β9,β9-tetramethyl- (SPG)Monomer or other reactantPlastics250The migration of oligomers of less than 1000 Da shall not exceed 2,5 μg/l water (expressed as SPG). Only to be used as a monomer in the production of polyesters. A well described method to determine whether the oligomer migration complies with the restrictions specified shall be provided to the certifying body. This method shall be suitable for use by the certifying body for the purposes of certification. If the method requires a calibration sample, a sufficient sample shall be supplied to the certifying body on its request. 31 December 2037 0773147398-31-01059poly((R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate) ('PHBH')Additive or polymer production aidAllThe migration of all oligomers with a molecular weight below 1000 Da shall not exceed 250 μg/l.(34)The substance is a macromolecule obtained from microbial fermentation.31 December 203707741060ground sunflower seed hullsAdditive or polymer production aidAll Only to be used for cold water applications. The seed hulls shall be obtained from sunflower seeds that are fit for human consumption. The processing temperature of the plastic containing the additive shall not exceed 240 °C. 31 December 2037077580512-44-310612,4,4′-trifluorobenzophenoneMonomer or other reactantPlasticsOnly to be used as a co-monomer in the manufacture of polyether ether ketone plastics up to 0,3 % w/w of the final material.31 December 2034 07761547-26-810632,3,3,4,4,5,5-heptafluoro-1-penteneOther (starting substance for a polymeric additive)Plastics(38)Only to be used together with tetrafluoroethylene and/or ethylene co-monomers to manufacture fluorocopolymers for application as polymer processing aid at up to 0,2 % w/w of the drinking water contact material, and when the low-molecular mass fraction below 1500 Da in the fluorocopolymer does not exceed 30 mg/kg.31 December 2028077739318-18-81064tungsten oxideAdditive or polymer production aidAllFor tungsten, refer to Annex V. Stoichiometry: WOn, n = 2,72-2,90. When used as reheat agent in polyethylene terephthalate (PET) verification of compliance with the specific migration limit is not required; in all other cases compliance with the specific migration limit shall be verified in accordance with Commission Implementing Decision (EU) 2024/365. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2037 077885711-28-01065mixture of methyl-branched and linear C14-C18 alkanamides, derived from fatty acidsAdditive or polymer production aidPlastics250

Only to be used in the manufacture of articles made of polyolefins. Migration of stearamide, under substance with EUPL Number 0248 to which no specific migration limit applies, shall be excluded from verification of the compliance of the migration of the mixture with the specific migration limit laid down for the mixture. 31 December 2028 077923985-75-310661,2,3,4-tetrahydronaphthalene–2,6-dicarboxylic acid, dimethyl esterMonomer or other reactantPlastics2,5 - expressed as the sum of the substance and of its dimers (cyclic and open chain)Only to be used in a plastic multilayer material, as a co-monomer in the manufacture of a polyester layer that is not in direct contact with water.31 December 20370780616-38-61067dimethyl carbonateMonomer or other reactantAll2,5 Migration of sum of all polycarbonate oligomers with a molecular weight below 1000 Da must be < 2,5 μg/l. A well described method suitable to determine the oligomer migration needs to be provided to the certifying body, as well as a sufficient sample for calibration upon request. Not for use with 1,6-hexanediol in the manufacture of polycarbonate pre-polymers to manufacture thermoplastic polyurethanes with 4,4′-methylenediphenyldiisocyanate and diols. 31 December 2037 07812530-83-81068[3-(2,3-epoxypropoxy)propyl]trimethoxy silaneMonomer or other reactantPlasticsOnly to be used as a component of a sizing agent to treat glass fibres to be embedded in glass-fibre-reinforced low diffusivity plastics (polyethylene terephthalate (PET), polybutylene terephthalate (PBT) and thermoset polyesters and epoxy bisphenol vinylester) in contact with water. In treated glass fibres, residues of the substance must not be detectable at 0,01 mg/kg for the substance and 0,06 mg/kg for each of the reaction products (hydrolysed monomers and epoxy-containing cyclic dimer, trimer and tetramer).31 December 2037 078275-28-51069isobutanePolymer production aidAll31 December 203407831227937-46-31076phosphorous acid, triphenyl ester, polymer with alpha-hydro-omega-hydroxypoly[oxy(methyl–1,2-ethanediyl)], C10-C16 alkyl estersAdditive or polymer production aidPlastics2,5 To be used only: a) as an additive at up to 0,2 % w/w in high impact polystyrene for cold water applications. b) as an additive at up to 0,025% w/w in acrylonitrile-butadiene-styrene (ABS) materials for cold water applications. 31 December 203707843319-31-11078tris(2-ethylhexyl) benzene-1,2,4-tricarboxylateAdditive or polymer production aidPlastics(31)Only to be used as plasticiser to manufacture soft polyvinyl chloride.31 December 20340785156157-97-01080(triethanolamine-perchlorate, sodium salt) dimerAdditive or polymer production aidPlastics (36) (37) Only to be used in rigid polyvinyl chloride.31 December 2034 078652628-03-21082phosphoric acid, mixed esters with 2-hydroxyethyl methacrylateMonomer or other reactantPlastics2,5 - expressed as the sum of the mono-, di- and triesters of phosphoric acid and the mono-, di-, tri- and tetraesters of diphosphoric acid.Only to be used at up to 0,35 % (w/w) to manufacture polymethylmethacrylate.31 December 203707872421-28-51083benzophenone–3,3’,4,4’-tetracarboxylic dianhydride (BTDA)Monomer or other reactantPlastics2,5Only to be used at up to 43 % (w/w) as a co-monomer in the production of polyimides.31 December 203707889005-82-7amyloseAid to polymerisationCoatings31 December 202807892634-33-51,2-benzisothiazol-3(2H)-one

Additive Polymer production aid Other (in-can preservative) Rubber, silicone, coatings25Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 3.4 and 4.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2034 0790119-53-9benzoinPolymer production aidCoatings2,531 December 203407917637-07-2boron trifluorideAid to polymerisationPlastics, rubberFor boron and fluoride, refer to Annex V.31 December 20340792109-63-7boron trifluoride etherateAid to polymerisationPlasticsFor boron and fluoride, refer to Annex V.31 December 2034079375-65-0tert-butanolPolymer production aidPlastics, coatings50031 December 2034079425085-50-14-tert-butylphenol formaldehyde resinAid to polymerisationRubber 4-tert butylphenol MTCtap = 2,5 μg/l formaldehyde MTCtap = 750 μg/l xylene MTCtap = 50,0 μg/l (15)Oligomers MW < 1000 Da: max. 25 %; methylol groups: max. 16 %.31 December 203407957789-75-5calcium fluorideAdditivePlasticsFor fluoride, refer to Annex V.If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2034 07968007-24-7cashew nut shell liquid, distilled ( > 90 % cardanol)Monomer or other reactantCoatings2,5Not for use as reactive diluent.31 December 203407979004-35-7cellulose acetateMonomer or other reactantCoatings31 December 202807989004-39-1cellulose acetate propionateMonomer or other reactantCoatings31 December 2028079926172-55-45-chloro-2-methyl-2H-isothiazol-3-oneOther (in-can preservative)Coatings, silicone0,5Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 3.4 and 4.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028080021679-31-2chromium(III)acetylacetonatePolymer production aidPlasticsFor chromium, refer to Annex V.31 December 2034080110025-73-7chromium(III)chlorideAid to polymerisationPlasticsFor chromium, refer to Annex V.31 December 2034080211118-57-3chromium oxideAid to polymerisationPlasticsFor chromium, refer to Annex V.31 December 2034 08037681-65-4copper(I)iodideAid to polymerisationPlastics, rubber, coatings (6) For copper, refer to Annex V. 31 December 20340804110-05-4di-tert-butyl peroxideAid to polymerisationPlastics, rubber0,1 tert-butanol MTCtap = 500 μg/l methyl tert-butyl ether MTCtap = 15 μg/l 31 December 2034080575-09-2dichloromethanePolymer production aidPlastics, rubber, coatings2,531 December 20280806112-34-5diethylene glycol monobutyl ether (DEGBE)Polymer production aidCoatings, silicone(40)31 December 20340807127-19-5dimethylacetamidePolymer production aidPlastics2,531 December 202808081323-83-7distearic acid, diester with glycerol Additive Polymer production aid Plastics31 December 20280809100-41-4ethylbenzenePolymer production aidPlastics, coatings, silicone3031 December 2034 0810111-76-2ethyleneglycol monobutyl etherPolymer production aidCoatings, silicone(2)31 December 20340811112-25-4ethyleneglycol monohexyl etherPolymer production aidCoatings(2)31 December 2034081231566-31-1glycerol monostearate

Additive Polymer production aid Rubber, coatings, silicone31 December 203408131333-74-0hydrogenPolymer production aidRubber31 December 203708148006-54-0lanolin (pharmacopeia grade)Aid to polymerisationCoatings31 December 2028081525182-44-9methacrylic acid, chromium (III) salt Polymer production aid Aid to polymerisation Plastics (22) For chromium, refer to Annex V. 31 December 2028081678-93-3methyl ethyl ketone (butan-2-one) Polymer production aid Additive Plastics, coatings, silicone, lubricants25031 December 20340817108-10-1 methyl isobutyl ketone (4-methylpentan-2-one) Polymer production aidPlastics, coatings, silicone25031 December 2028 08182163-42-02-methylpropane–1,3-diolMonomer or other reactantCoatings25031 December 203408197782-44-7oxygenAid to polymerisationPlastics31 December 2037082027619-97-2perfluorohexylethylsulfonic acid Additive Polymer production aid Plastics, coatings0,1 (38) (39) 31 December 20280821103-71-9phenyl isocyanateMonomer or other reactantCoatings(16) Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 203408221314-56-3phosphoric anhydride Monomer or other reactant Aid to polymerisation Coatings31 December 203408239014-85-1polyethyleneglycol-2,4,7,9-tetramethyl-5-decyn–4,7-diol ether Additive Polymer production aid CoatingsOnly to be used for sintered PTFE coatings.31 December 2034082437349-34-1polyglyceryl-5 stearateAdditiveCoatings, silicone31 December 203708259046-10-0polyoxypropylene diamine (POPDA)Monomer or other reactantCoatings2,5Average MW≥230 Da; purity: min. 80 % POPDA.31 December 2037 08269002-89-5polyvinyl alcohol Additive Polymer production aid Plastics, rubber Production by sintering. Maximum residual content in the final material (QM) = 20000 mg/kg. 31 December 2037082712136-45-7potassium oxideAdditivePlasticsIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 203408289000-59-3shellacMonomer or other reactantCoatings31 December 202808297681-49-4sodium fluorideAdditivePlasticsFor fluoride, refer to Annex V.If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2034 08301313-59-3sodium oxide Additive Polymer production aid Other (processing aid) AllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 203408317782-99-2sulfurous acidAdditivePlastics, rubber(18)If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 202808327646-78-8tin(IV)chlorideAid to polymerisationCoatings31 December 20340833108-88-3toluene

Additive Polymer production aid Rubber, coatings, silicone60Note: the MTCtap is higher than the odour threshold.31 December 20340834101-37-1triallylcyanurateAid to polymerisationRubber2,531 December 2034 083516938-22-02,2,4-trimethylhexane–1,6 diisocyanateMonomer or other reactantCoatings(16) Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2028083615646-96-52,4,4-trimethylhexane–1,6-diisocyanateMonomer or other reactantCoatings(16) Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 202808373048-64-45-vinyl-2-norborneneMonomer or other reactant (comonomer)Rubber2,531 December 20340838wheat protein Polymer production aid Additive All31 December 2028 08391330-20-7xylenePolymer production aidPlastics, coatings, silicone50Note: the MTCtap is higher than the odour threshold.31 December 20340840zinc dustAdditiveCoatingsFor zinc, refer to Annex V.If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2034084155799-16-1zinc hydroxyphosphiteAdditiveCoatingsFor zinc, refer to Annex V.If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028 084217501-44-9acetyl acetonic acid, zirconium salt Monomer or other reactant Aid to polymerisation Silicone31 December 2031084363449-41-2alkyl(C8-C18)dimethylbenzylammonium chloride Additive Polymer production aid Lubricants31 December 2028084454326-11-3aluminium hydroxide benzoate stearate Polymer production aid Additive LubricantsFor aluminium, refer to Annex V.31 December 203108451760-24-3[3-(2-aminoethyl)aminopropyl]trimethoxysilanePolymer production aidPlastics, coatings0,131 December 2031084626125-61-1aramid fibresAdditive (polymeric)Rubber p-phenylendiamine MTCtap = 0,1 μg/l terephthalic acid MTCtap = 375 μg/l 31 December 2034 084795-33-0benzothiazyl-2-cyclohexylsulfenamideAid to polymerisationRubber0,1 2-mercaptobenzothiazole (2-MBT) (CAS No. 149-30-4) MTCtap = 100 μg/l 2,2‘-Ddithio-bis-benzothiazole (Di(benzothiazole-2-yl)disulfide, MBTS) (CAS No. 120-78-5) MTCtap = 2.5 μg/l benzothiazole (BT) (CAS No. 95-16-9) MTCtap = 0.1 μg/l 2-benzothiazolone (BTon) (CAS No. 934-34-9) MTCtap = 0.1 μg/l cyclohexylamine (CAS No. 108-91-8) MTCtap = 2.5 μg/l (43)31 December 2031 084878-63-72,5-bis(tert-butylperoxy)-2,5-dimethylhexaneAid to polymerisationPlastics, rubber, coatings0,1 When used for rubber, the following degradation products are relevant: tert-butanol MTCtap = 500 μg/l tert-amylalcohol MTCtap = 0,1 μg/l 2,5-dimethyl-hexanediol MTCtap = 0,1 μg/l 2,2,5,5-tetramethyltetrahydrofurane MTCtap = 0,1 μg/l (NB. it could not be analysed as no standard available)

For DHBP application above 0.4%: 3,3,6,6-tetramethyl–1,2-dioxane MTCtap = 0,1 μg/l di-tert-butylperoxide MTCtap = 0,1 μg/l (both impurities of DHBP) 31 December 2031 0849 25155-25-3 {2212-81-9 & 2781-00-2} 1,3-(and/or 1,4)-bis(tert-butylperoxyisopropyl)benzeneAid to polymerisationPlastics, rubber0,1No peroxide on the product surface.31 December 2031085085-60-9bis(2-methyl-4-hydroxy-5-tert-butylfenyl)butaneAdditiveRubber1531 December 20310851101-67-7 bis(4-octylphenyl)amine; (4,4'-dioctyldiphenylamine) AdditiveRubber2,5Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028 085239817-09-9 bisphenol-F-diglycidylether (BFDGE; bis(hydroxyphenyl) methane bis(2,3-epoxypropyl) ethers) Monomer or other reactant (resin)Coatings2,5 - expressed as the sum of BFDGE and hydrolysis products bisphenol F MTCtap = 2,5 μg/l epichlorohydrin MTCtap = 0.1 μg/l (49)31 December 202808537726-95-6bromineMonomer or other reactantRubber31 December 2031085495-31-8N-tert-butyl-2-benzothiazolesulfenamideAid to polymerisationRubber(43)31 December 2031085598-29-34-tert-butylcatecholAdditiveCoatings, silicone31 December 203108563457-61-2tert-butylcumylperoxideAid to polymerisationCoatings, siliconeNo peroxide on the product surface.31 December 2031085717540-75-94-sec-butyl-2,6-di-tert-butylphenolAdditivePlastics, rubber2,5For the MTCtap values of degradation products, refer to Table 4.31 December 2031085888-18-62-tert-butylphenolMonomer of other reactantPlastics, coatings0,131 December 2031 08592556-36-71,4-cyclohexanediisocyanateMonomer or other reactantCoatings(16) Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2028086017796-82-6N-(cyclohexylthio)phthalimideAid to polymerisationRubber15031 December 20310861101-77-94,4'-diaminodiphenylmethaneMonomer or other reactantCoatings0,131 December 2028086268953-84-4N,N'-diaryl-p-phenylenediamineAdditiveRubber0,131 December 2031086394-36-0dibenzoyl peroxideAid to polymerisationPlastics, rubber, silicone0,131 December 203108646731-36-81,1-di-tert-butylperoxy-3,3,5-trimethylcyclohexaneAid to polymerisationPlastics, rubber0,1No peroxide on the product surface.31 December 2031086596-76-42,4-di-tert-butylphenolAdditiveRubber31 December 2031 086677-58-7dibutyltin dilaurateAid to polymerisationPlastics, coatings, silicone0,131 December 20280867133-14-22,4-dichlorobenzoyl peroxideAid to polymerisationCoatings, silicone0,1No peroxide on the product surface.31 December 2031086880-43-3dicumyl peroxideAid to polymerisationPlastics, rubber, silicone0,1 When used for rubber or silicone, the following degradation products are relevant: cumylalcohol MTCtap = 2,5 μg/l methylcumylether MTCtap = 0,1 μg/l alpha-methylstyrene MTCtap = 0,7 μg/l acetophenone MTCtap = 2,5 μg/l 31 December 2031 086977-73-6dicyclopentadieneMonomer or other reactantRubber2,531 December 20310870111-90-0diethyleneglycol monoethyl etherPolymer production aidCoatings(40)31 December 20310871140-01-2diethylenetriaminepentaacetic acid pentasodium saltPolymer production aidPlastics31 December 202808723710-84-7N,N-diethylhydroxylamineAid to polymerisationPlastics

Maximum dosage = 0,02 % (w/w). Maximum quantity of diethylamine impurity in the product 0,1 %. Maximum quantity of N-nitrosodiethylamine impurity in the product 0,5 mg/kg. 31 December 203108731047-16-15,12-dihydroquino[2,3-b]acridine–7,14-dioneAdditivePlastics, coatingsIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2031 08743437-84-1diisobutyryl peroxideAid to polymerisationPlastics0,1 Maximum dosage = 0,02 % (w/w). No peroxide on the product surface. 31 December 20310875105-74-8dilauroyl peroxideAid to polymerisationPlasticsNo peroxide on the product surface.31 December 20310876109-87-5dimethoxymethane Monomer or other reactant Aid to polymerisation Plastics31 December 20310877124-40-3dimethylamineMonomer or other reactantRubber, coatings3,031 December 203108787005-47-22-dimethylamino-2-methyl-1-propanolAdditivePlastics31 December 20310879895-85-2di(4-methyl-benzoyl)peroxideAid to polymerisationSilicone No peroxide on the product surface. Not for use in rubber. 31 December 2031088053880-86-7dimethyldiphenylthiuram disulfideAid to polymerisationRubber(42)31 December 20280881115-10-6dimethyl etherPolymer production aidCoatings< 131 December 2031 088268-12-2N,N-dimethylformamidePolymer production aidPlastics, coatings2,531 December 2028088370131-67-8dimethylsiloxane, hydroxy terminatedMonomer or other reactant (base oil)Lubricants31 December 202808843806-34-6dioctadecyl pentaerythritol diphosphiteAdditivePlastics31 December 20310885971-15-3di-N-pentamethylenethiuram hexasulfideAid to polymerisationRubber(42)31 December 20310886120-54-7di-N-pentamethylenethiuram tetrasulfideAid to polymerisationRubber(42)31 December 20280887122-39-4diphenylamineAid to polymerisationPlastics, rubberMaximum dosage = 0,1 % (w/w).31 December 2031088868411-46-1diphenylamine, octylatedAdditiveRubber Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. Maximum residual content in the final material (QM) = 15 g/kg. 31 December 2031 0889102-06-7N,N-diphenylguanidineAid to polymerisationRubber2,531 December 20280890120-78-5dithiobis(2-benzothiazole)Aid to polymerisationRubber2,5 mercaptobenzothiazol MTCtap = 100 μg/l N-nitrosamines MTCtap = 0,3 μg/l (43)31 December 2031089187057-87-22-ethylbutane–1,4-diisocyanateMonomer or other reactantCoatings(16) Maximum residual content in the final material (QM) = 1 mg/kg, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 20280892110-80-5ethyleneglycol monoethyl ether Monomer or other reactant Polymer production aid Coatings, silicone(2)31 December 20280893109-86-4ethyleneglycol monomethyl etherPolymer production aidCoatings(2)31 December 20280894149-57-52-ethylhexanoic acid Additive Polymer production aid

Plastics2,531 December 2031 089517689-77-9ethyltrisacetoxysilaneAid to polymerisationSilicone31 December 2031089628106-30-1ethylvinylbenzeneMonomer or other reactantPlastics(44)31 December 2028089778-27-3ethynylcyclohexanolPolymer production aidRubber, coatings, silicone90031 December 203108989003-08-1formaldehyde-2,4,6-triamino-1,3,5-triazine, copolymerAdditiveCoatings(15)Only for sintered PTFE.31 December 203708999006-24-0formaldehyde-xylene, copolymer Monomer or other reactant (resin) Other (processing aid) Rubber(15)31 December 20280900592-45-01,4-hexadieneMonomer or other reactantRubber(45)31 December 20280901592-42-71,5-hexadieneMonomer or other reactantRubber(45)31 December 2031090216096-31-41,6 hexanediol diglycidyl etherAdditiveCoatings0,131 December 2028 09032-hydroxy-2-sulfinato acetic acid, disodium saltAid to polymerisationPlastics(18)When used in a mixture of 2-hydroxy-2-sulfinato acetic acid, disodium salt (35-60 %), 2-hydroxy-2-sulfonato acetic acid, disodium salt (10-60 %) and sodium sulfite (0-40 %) (mixture), the maximum dosage shall be 0,5 %.31 December 202809042-hydroxy-2-sulfonato acetic acid, disodium saltAid to polymerisationPlastics(18)When used in a mixture of 2-hydroxy-2-sulfinato acetic acid, disodium salt (35-60 %), 2-hydroxy-2-sulfonato acetic acid, disodium salt (10-60 %) and sodium sulfite (0-40 %) (mixture), the maximum dosage shall be 0,5 %.31 December 202809052226-96-24-hydroxy-2,2,6,6-tetramethylpiperidinoxylAid to polymerisationPlastics2,5No peroxide on the product surface.31 December 2031090655406-53-63-iodo-2-propynylbutylcarbamateAid to polymerisationRubber, coatings31 December 2031 090778-83-1isobutanolPolymer production aidSilicone31 December 203109087425-80-1isobutyl titanateAid to polymerisationSilicone31 December 203109093999-01-7linoleamideAid to polymerisationCoatings, silicone31 December 20280910149-30-42-mercaptobenzothiazoleAid to polymerisationRubber100(43)31 December 2031091160-24-22-mercaptoethanolAdditivePlastics, rubber2,531 December 2031091268440-24-4mercaptoethyl tallateAdditive or polymer production aidPlastics150031 December 20280913115-19-5methyl-2-butyn-3-ol-2Aid to polymerisationCoatings, silicones31 December 2031091415520-10-22-methyl–1,5-diaminopentaneMonomer or other reactantCoatings5,031 December 203109157786-17-62,2-methylenebis(4-methyl-6-nonylphenol)AdditivePlastics, rubber0,131 December 20310916598-09-4methylepichlorhydrinMonomer or other reactantCoatings0,131 December 2028091796-29-7methyl ethyl ketone oximeAid to polymerisationCoatings120Only for hot curing coatings.31 December 2028 0918693-98-12-methylimidazoleAdditiveCoatings2,531 December 20280919534-26-92-methylimidazolineAdditive or polymer production aidCoatings0,131 December 2028092034813-62-22-methylpentane–1,5-diisocyanateMonomer or other reactantCoatings(16) Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA).

31 December 20280921201687-58-3methyltin-2-mercaptoethyl tallateAid to polymerisationPlastics9,031 December 202809224253-34-3methyltrisacetoxysilaneAid to polymerisationSilicone31 December 2031092322984-54-9methyltrisbutanoximosilaneAid to polymerisationSilicone31 December 20310924240-040-815901-40-3methyltriscyclohexylaminosilaneAid to polymerisationSilicone31 December 20310925253-634-737697-65-7methyltris-sec.-butylaminosilaneAid to polymerisationSilicone31 December 20310926polytitanic acid, butyl ester (butylpolytitanate)Aid to polymerisationSilicone31 December 2028 0927108-90-7monochlorobenzeneAdditivePlastics, coatings1,031 December 2031092851240-95-0neodecaneperoxoic acid, 1,1,3,3-tetramethylbutyl esterAid to polymerisationPlastics0,1 Maximum dosage = 0,06 % (w/w). No peroxide on the product surface. 31 December 203109299084-06-4naphthalene sulfonic acid-formaldehyde condensation product, sodium saltPolymer production aidPlastics, rubber(15)Only for sintered products.31 December 203709307697-37-2nitric acidPolymer production aidPlastics, coatings5,031 December 2031093126530-20-12-octyl-2H-isothiazole-3-oneOther (in-can preservative)RubberOnly to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 3.4 and 4.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 20310932 8012-95-1 8042-47-5 paraffin oilAdditivePlastics, rubber31 December 2031 0933614-45-9peroxybenzoic acid, tert-butyl esterAid to polymerisationPlastics, coatings0,131 December 2031093415520-11-3peroxydicarbonic acid, bis(4-tert-butylcyclohexyl) esterAid to polymerisationPlastics, coatings0,1No peroxide on the product surface.31 December 2031093516111-62-9peroxydicarbonic acid, bis(2-ethylhexyl) esterAid to polymerisationPlastics0,1No peroxide on the product surface.31 December 2031093626322-14-5peroxydicarbonic acid, dicetyl esterAid to polymerisationPlastics0,1No peroxide on the product surface.31 December 2031093753220-22-7peroxydicarbonic acid, dimyristyl esterAid to polymerisationPlastics0,1No peroxide on the product surface.31 December 20310938927-07-1peroxypivalic acid, tert-butyl esterAid to polymerisationPlastics0,131 December 203109393006-82-4peroxy-2-ethylhexanoic acid, tert-butyl esterAid to polymerisationPlastics, rubber0,131 December 203109407775-27-1peroxydisulfuric acid, disodium saltAid to polymerisationPlastics, coatings0,131 December 2031094126748-41-4peroxyneodecanoic acid, tert-butyl esterAid to polymerisationPlastics0,131 December 203109427727-21-1peroxydisulfuric acid, dipotassium saltAid to polymerisationPlastics, coatings0,131 December 2031 094368610-06-0phenols, butylated, isobutylated or octylatedAdditiveRubberFor the MTCtap values of degradation products, refer to Table 4.31 December 2028094461788-44-1phenols, styrenatedAdditiveRubber, coatings31 December 20310945936-49-22-phenylimidazolMonomer or other reactantCoatings2,531 December 20310946104-49-41,4-phenylene diisocyanateMonomer or other reactantCoatings(16)

Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 203109477774-80-3phenyl-o-tolyl-phenylenediamineAdditiveRubber0,131 December 20280948126-73-8phosphoric acid, tributyl ester Additive Polymer production aid Rubber31 December 2028 094910294-56-1phosphorous acidAdditiveRubberIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028095054771-30-1phosphorous acid, dinonylphenyl bis(nonylphenyl) esterAdditivePlastics30031 December 2028095184-61-7phthalic acid, dicyclohexyl esterAdditivePlastics300Maximum dosage = 5 % (w/w) as sum of all phthalates.31 December 20280952110-85-0piperazineMonomer or other reactantPlastics, rubber7531 December 202809539003-01-4polyacrylic acidAdditiveRubber(21)31 December 203109549003-29-6polybutene Monomer or other reactant (base oil) Additive Polymer production aid Rubber, lubricantsMolecular weight > 1000 Da.31 December 2034 095568937-10-0polybutene, hydrogenatedMonomer or other reactant (base oil)LubricantsMolecular weight > 1000 Da.31 December 2037095668132-00-3polycyclopentadieneMonomer or other reactant (resin)Plastics31 December 20280957polyethyleneamineAdditivePlastics, coatingsFor polypropylene as an anchoring agent: ≤ 0,05 μg/dm2 provided that the product does not release ethyleneimine.31 December 20310958polyethylene aminostearamide ethylsulfateAdditiveCoatings31 December 2034095928208-80-2poly(ethylene-co-acrylic acid), zinc saltMonomer or other reactantPlastics (21) For zinc, refer to Annex V. 31 December 203709609005-07-6polyethyleneglycol dioleateAdditiveCoatings31 December 203409619003-27-4polyisobutene Monomer or other reactant (base oil) Additive (polymeric) for rubber Plastics, rubber, lubricantsMolecular weight > 1000 Da.31 December 2037 0962poly(styrene-co-maleic anhydride)AdditivePlastics31 December 203709639002-84-0polytetrafluoroethyleneAdditive (polymeric)Coatings, lubricants, silicone2,5 - for the residual tetrafluoroethylene(38)31 December 2028096425498-06-0polyvinyl cyclohexanePolymer production aidRubber31 December 20370965poly(vinyl methyl ether)AdditivePlastics31 December 2037096635674-65-8N,N''-1,3-propanediyl bis-(N'-octadecylurea) Additive Polymer production aid Coatings2,531 December 20310967108-32-7propylene carbonatePolymer production aidLubricants31 December 20310968122-62-3sebacic acid, bis(2-ethylhexyl) esterAdditive (polymeric)Plastics31 December 2031096952829-07-9sebacic acid, bis(2,2,6,6-tetramethyl-4-piperidyl) ester Additive Polymer production aid Plastics, lubricants30031 December 2031 0970sodium aluminateAdditiveCoatingsIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 20310971149-44-0sodium hydroxymethanesulfinateAid to polymerisationPlasticsMaximum dosage = 0,07 % (w/w).31 December 20310972stearoyl-palmitoyl-benzoyl-methaneMonomer or other reactantPlastics31 December 2028097368442-68-2styrene, reaction product with diphenylamineAdditiveRubber2,531 December 20310974126-33-0sulfolanePolymer production aidPlastics2,531 December 203109757446-09-5sulfur dioxideMonomer or other reactantRubber31 December 2031097610591-85-2tetrabenzylthiuram disulfideAid to polymerisationRubber(42)31 December 203109775593-70-4tetra-n-butyl titanateAid to polymerisationPlastics, rubber, silicone31 December 2031

097897-77-8tetraethylthiuram disulfideAid to polymerisationPlastics, rubber(42)31 December 20310979811-97-21,1,1,2-tetrafluoroethaneAdditivePlastics(38)Maximum dosage = 2,2 % (w/w).31 December 202809803064-73-1tetraisobutylthiuramdisulfideAdditive or polymer production aidRubber(42)31 December 20310981126-86-32,4,7,9-tetramethyl-5-decyne–4,7-diolAid to polymerisationRubberMaximum dosage = 0,1 % (w/w).31 December 20310982137-26-8tetramethylthiuram disulfideAid to polymerisationRubber(42)31 December 2031098397-74-5tetramethylthiuram monosulfideAid to polymerisationRubber(42)31 December 2031098426471-62-5toluene diisocyanateMonomer or other reactantCoatings(16) Maximum residual content in the final material (QM) = 1 mg/kg, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 20310985104-15-4p-toluenesulfonic acidAid to polymerisationPlastics, rubber0,531 December 2031 098693-69-6o-tolylbiguanidineAid to polymerisationRubber0,131 December 203109871025-15-6triallyl isocyanurateAid to polymerisationRubber0,131 December 2031098828807-72-9tricyclododecane diisocyanateMonomer or other reactantCoatings(16) Maximum residual content in the final material (QM) = 1 mg/kg, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2028098990-72-22,4,6-tri(dimethylaminomethyl)phenolAid to polymerisationRubber, coatings0,131 December 2031099078-40-0triethyl phosphate Additive Polymer production aid Plastics, coatings37531 December 203109917718-98-1vanadium chlorideAid to polymerisationPlastics, rubberFor vanadium, refer to Annex V.31 December 2031099211099-11-9vanadium oxideAid to polymerisationPlastics, rubberFor vanadium, refer to Annex V.31 December 2028099388-12-0vinylpyrrolidone Monomer Additive Polymer production aid Plastics31 December 2028 099414726-36-4zinc dibenzyldithiocarbamateAid to polymerisationRubber (42) For zinc, refer to Annex V. 31 December 20310995136-23-2zinc dibutyldithiocarbamateAid to polymerisationRubber (42) For zinc, refer to Annex V. 31 December 2031099614324-55-1zinc diethyldithiocarbamateAid to polymerisationRubber (42) For zinc, refer to Annex V. 31 December 20310997137-30-4zinc dimethyldithiocarbamate Aid to polymerisation Other (in-can preservative) Rubber, coatings (42) For zinc, refer to Annex V. Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 3.4 and 4.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 20310998136-53-8zinc-di-2-ethylhexanoateMonomer or other reactantSiliconeMaximum residual content in the final material (QM) = 15 g/kg.31 December 2031 099953801-45-9zirconium oxideAdditivePlastics, rubberFor zirconium, refer to Annex V.31 December 202810001068-27-52,5-bis(tert-butylperoxy)-2,5-dimethyl-3-hexyneAid to polymerisationPlastics0,131 December 203110011071-93-8adipic acid dihydrazideMonomer or other reactantCoatings2,5hydrazine MTCtap = 0,1 μg/l – to be checked by analysis.Only for powder coatings.31 December 203410021338-23-42-butanone peroxide

Polymer production aid Aid to polymerisation Plastics0,131 December 2031100313822-56-53-(trimethoxysilyl)propylamineMonomer or other reactantCoatings85 - expressed as siliconOnly for use in gas phase coatings on silicones, at max 400 °C; Si/N ratio in the layer should be at least 11.31 December 2031100414024-18-1acetylacetonate, iron salt Polymer production aid Aid to polymerisation Plastics, coatings2,5Maximum dosage = 0,01 % (w/w).31 December 2031 10051503-48-6quino [2, 3-b]acridine-6,7,13,14(5H,12H)-tetrone (quinacridinone quinone, QAQ)AdditivePlastics2,0 Purity > 90% QAQ. Specific nanomaterial (> 50% 1-100 nm) in maximum one particle dimension (platelets). 31 December 2031100622288-41-11,1,3,3-tetramethylbutyl peroxypivalate Polymer production aid Aid to polymerisation Plastics1,0Maximum dosage = 0,007 % (w/w).31 December 2031100724748-23-03,6,9-triethyl-3,6,9-trimethyl-1,2,4,5,7,8-hexoxonane Polymer production aid Aid to polymerisation Plastics0,1Maximum dosage = 0,05 % (w/w).31 December 2031100829240-17-3(1,1-dimethylpropyl) 2,2-dimethyl-propaneperoxoate Polymer production aid Aid to polymerisation Plastics0,1Maximum dosage = 0,2 % (w/w).31 December 2031100937187-22-7acetylacetone peroxideAid to polymerisationPlastics0,131 December 20281010681-84-5tetramethylorthosilicateMonomer or other reactantCoatingsOnly for use in gas phase coatings on silicones.31 December 2031101194-96-22-ethyl–1,3-hexanediolMonomer or other reactantPlastics, coatings2,531 December 2031 10123851-87-4di-(3,5,5-trimethyl)-hexanoyl)peroxideAid to polymerisationPlastics, rubber, coatings, silicone0,1Maximum dosage = 0,2 % (w/w).31 December 2031101368928-76-7dimethyltin dineodecanoate Polymer production aid Aid to polymerisation Plastics, rubber, coatings(9) Plastics: maximum dosage = 0,12 % (w/w). Rubber, coatings: maximum dosage = 1 % (w/w). 31 December 20311014231-765-07722-84-1hydrogen peroxideAid to polymerisationPlastics, rubber, coatings0,131 December 2031101580-15-9cumene hydroperoxide Monomer or other reactant (crosslinker incorporated into polymer) Aid to polymerisation Plastics, rubber, coatings0,1Maximum dosage = 1 % (w/w).31 December 20311016236-050-713122-18-4peroxy(3,5,5-trimethylhexanoic acid), tert-butyl esterAid to polymerisationPlastics, rubber, coatings0,1Maximum dosage = 1 % (w/w).31 December 2031 1017246-619-125103-58-6tert-dodecanethiol Polymer production aid Aid to polymerisation Plastics, rubber, coatings Plastics: maximum dosage = 0,7 % (w/w). Rubber: maximum dosage = 1 % (w/w). 31 December 20311018231-786-57727-54-0ammonium persulfateAid to polymerisationPlastics, rubber, coatings0,1For ammonium, refer to Annex V.Maximum dosage = 1 % (w/w).31 December 203110197705-07-9titanium trichlorideAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 20311020203-650-5109-13-7tert-butyl peroxyisobutyrateAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 20311021203-710-0109-83-12-methylaminoethanolAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 20311022203-874-3111-48-8thiodiglycolAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 2031

1023112-55-01-dodecanethiolAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 20311024114-83-0acetophenylhydrazineAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 20281025204-469-4121-44-8triethylamineAid to polymerisationPlastics, rubber, coatings0,131 December 20311026204-709-8124-68-52-amino-2-methylpropanolPolymer production aidPlastics, rubber, coatings31 December 20311027236-740-813472-08-72,2'-azobis[2-methylbutyronitrile]Aid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 2031102813476-99-8vanadium tris acetyl acetonateAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 2031 102914666-78-5diethylperoxydicarbonateAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 20311030205-769-8150-76-54-methoxyphenolAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 2031103116066-38-9di-n-propyl peroxydicarbonateAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 20311032240-344-016215-49-9dibutyl peroxydicarbonateAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 20311033218-880-12273-43-0butylhydroxyoxostannaneAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 2031 103422743-71-11,1-bis(t-hexyperoxy)cyclohexaneAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 20281035252-091-334562-31-73,5-diethyl–1,2-dihydro-1-phenyl-2-propylpyridineAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 20311036224-305-54297-95-4sodium phenylphosphinateAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 20311037226-218-85329-14-6sulfamidic acidAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 20311038208-778-5541-41-3ethyl chloroformateAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 20311039210-036-0603-35-0triphenylphosphineAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 2031 1040270-877-468479-98-1diethylmethylbenzenediamineAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 20311041200-915-775-91-2tert-butyl hydroperoxideAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 20281042231-780-27727-18-6vanadium trichloride oxideAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 20311043201-321-081-07-21,2-benzisothiazol-3(2H)-one 1,1-dioxideAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 20311044212-791-1870-08-6dioctyltin oxideAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 2031104592-84-2phenothiazineAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 20311046202-443-795-71-62-methylhydroquinoneAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 20311047202-805-499-97-8N,N-dimethyl-p-toluidineAid to polymerisationPlastics, rubber, coatingsMaximum dosage = 1 % (w/w).31 December 2031

1048111-70-61-heptanolMonomer or other reactantCoatings31 December 20311049112-53-81-dodecanolMonomer or other reactantCoatings31 December 203110508002-11-7poppy-seed oilMonomer or other reactantCoatings31 December 202810518024-09-7walnut oilMonomer or other reactantCoatings31 December 20281052109-52-4valeric acidMonomer or other reactantCoatings31 December 20311053111-27-31-hexanolMonomer or other reactantCoatings31 December 20311054112-72-11-tetradecanolMonomer or other reactantCoatings31 December 20311055112-92-51-octadecanolMonomer or other reactantCoatings31 December 20311056163149-29-9poly-alpha-olefin from 1-dodecene and 1-octeneMonomer or other reactant (base oil)LubricantsAverage molecular weight not less than 440 Da. Viscosity at 100 °C not less than 3.8 cSt (3.8 × 10-6 m2/s). Polymerisation production aids and additives less than 0,02 % (w/w) in polymer.31 December 2037 1057219756-63-5sodium-alpha-C11-alcohol-heptaglycol ether-omega-sulfateAid to polymerisationCoatings25031 December 2028105825038-74-8polylaurolactam Polymer production aid Additive Lubricants250 - for laurolactamOligomers with MW < 1000 Da maximum 2 %.31 December 2037105968071-15-8butandiololeate, ethoxylatedOther (processing aid)Rubbers2,531 December 2034106068132-21-8perilla oilMonomer or other reactantCoatings31 December 2028106168439-49-6polyethylene glycol (EO=2-6) monoalkyl(C16-C18)ether Additive Aid to polymerisation Plastics, rubber, coatings2,531 December 2028106269011-36-5isotridecanol, ethoxylated Additive Polymer production aid Coatings90Maximum residue of 0,2 mg ethylene oxide per kg polymer.31 December 203110638001-21-6sunflower oilMonomer or other reactantCoatings31 December 202810648001-23-8safflower oilMonomer or other reactantCoatings31 December 202810658001-26-1linseed oil Monomer or other reactant Additive Rubber, coatingsIn rubbers, not for use in products in contact with warm and hot water.31 December 2028 10668001-29-4cotton seed oilMonomer or other reactantCoatings31 December 202810678001-30-7corn oilMonomer or other reactantCoatings31 December 202810688001-31-8coconut oilMonomer or other reactantCoatings31 December 202810698001-78-3castor oil, hydrogenated Monomer or other reactant Additive Polymer production aid Coatings31 December 203110708002-26-4tall oilMonomer or other reactantCoatings31 December 203110718008-74-0sesame oilMonomer or other reactantCoatings31 December 202810728015-74-5beechnut oilMonomer or other reactantCoatings31 December 202810738016-13-5fish oilMonomer or other reactantCoatings31 December 202810748016-24-8hempseed oilMonomer or other reactantCoatings31 December 202810758016-49-7pumpkin seed oilMonomer or other reactantCoatings31 December 2028 107689-05-4pyromellitic acidMonomer or other reactantCoatings2,5 – expressed as the sum of pyromellitic acid and pyromellitc anhydride31 December 203110779003-17-2polybutadieneAdditivePlastics, rubberMW > 1000 Da.31 December 203710789003-31-0polyisopreneAdditiveRubberMW > 1000 Da.31 December 203710799004-96-0poly (ethylene glycol) monooleateAdditiveCoatingsRestriction is covered via the parameter TOC < 0,5 mg/l.31 December 202810801,1,3-tris-(2-methyl-4-di-tridecylphosphite-5-tert-butyl-phenyl)-butane with added diphenylphosphiteAdditivePlasticsFor the MTCtap values of degradation products, refer to Table 4.For polyethylene and polypropylene, maximum residual content in the final material (QM) = 5000 mg/kg.31 December 20281081504-60-91,3-pentadieneMonomer or other reactantRubber31 December 20311082513-85-92,3-butanediolMonomer or other reactantRubber31 December 2031

10831,4-dihydro–2,6-dimethyl–3,5-dicarbododecyloxy-pyridineAdditivePlasticsFor PVC and its copolymers, maximum residual content in the final material (QM) = 3000 mg/kg.31 December 202810841-hydropentafluoro propeneMonomer or other reactantRubber(38)31 December 202810852-tert-butyl-4-hydroxyanisoleAdditiveRubber31 December 203110863-tert-butyl-4-hydroxyanisoleAdditiveRubber31 December 202810872,4-diphenylmethane-diisocyanateMonomer or other reactantRubber5,0 - expressed as primary aromatic amines(16)Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028 10882,6-diphenylmethane-diisocyanateMonomer or other reactantRubber5,0 - expressed as primary aromatic amines(16) Maximum residual content in the final material (QM) = 1 mg/kg in product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 20281089213-593-8992-55-24,4'-[[6-(octylthio)-1,3,5-triazine–2,4-diyl]bis(oxy)]bis[2,6-di-tert-butylphenol]AdditivePlastics, rubber31 December 20281090202-918-9101-14-43,3'-dichloro–4,4'-diamino-diphenylmethaneMonomer or other reactantRubber5,0 - expressed as primary aromatic amines31 December 20281091212-677-1843-55-04,4'-dioxydiphenyl–1,1'-cyclohexaneMonomer or other reactantPlastics31 December 20281092204-279-1118-82-14,4'-methylene-bis-(2,6-di-tert-butylphenol)AdditivePlasticsFor the MTCtap values of degradation products, refer to Table 4.31 December 2031 1093204-124-8116-09-61-hydroxypropan-2-oneAdditiveRubber31 December 20311094205-617-0144-15-0acetyl-tri-2-ethylhexyl-citrateAdditivePlastics15031 December 20311095201-066-577-89-4acetyl-triethyl-citrateAdditivePlastics31 December 20311096203-470-7107-18-6allyl alcoholMonomer or other reactantPlastics, rubber31 December 20311097211-546-6661-19-8behenic alcoholAdditivePlastics31 December 20281098

217-576-6 21112-45-8 1892-29-1 beta-amino crotonic acid ester with 2,2'-hydroxy diethylenesulfideAdditivePlasticsFor rigid PVC and its copolymers with predominantly PVC content, maximum residual content in the final material (QM) = 20000 mg/kg in total.31 December 20281099bis-2-tert-butyl-6-(3-tert-butyl-5-methyl-2-hydroxybenzylphenyl) terephthalateAdditivePlastics(27) For polyethylene, maximum residual content in the final material (QM) = 150 mg/kg. For polypropylene, maximum residual content in the final material (QM) = 1000 mg/kg. For polystyrene, maximum residual content in the final material (QM) = 500 mg/kg. 31 December 2028 1100201-624-885-70-1butyl phthalyl butyl glycolateAdditivePlastics31 December 20281101201-784-987-92-3butyl tartrateAdditivePlastics31 December 20281102269-637-168308-22-5calcium montanateAdditivePlastics31 December 20281103221-941-53287-12-5dicetyl thiodipropionateAdditiveRubber(14)Maximum residual content in the final material (QM) = 5000 mg/kg.31 December 20281104cetylpyridinium chlorideAdditivePlasticsMaximum residual content in the final material (QM) = 4000 mg/kg.31 December 20311105chlorinated paraffinAdditivePlastics31 December 20311106chlorinated polyethyleneAdditivePlastics31 December 20371107chlorinated rubberAdditiveRubber31 December 20281108chloroethylvinylacetateMonomer or other reactantRubber31 December 2028

1109203-799-6110-75-8chloroethylvinyletherAdditiveRubber31 December 2028111068037-39-8chlorosulfonated polyethyleneAdditiveRubber31 December 20341111215-607-81333-82-0chromic anhydrideAdditivePlasticsFor chromium, refer to Annex V.For use as an anchor for polytetrafluoroethylene on aluminium or glass.31 December 20281112491589-22-1cis 1,2-cyclo-hexanedicarboxylic acid, calcium saltAdditivePlastics25031 December 2028111327253-31-2cobalt neodecanoateAdditivePlastics2,5 - expressed as neodecanoic acid. (46) For cobalt, refer to Annex V. 31 December 20311114condensation product of cinnamic aldehyde and hexamethylenediamineAid to polymerisationRubber31 December 20281115condensation product of n-dodecyl alcohol with ethylene oxideAdditivePlasticsFor use as an antistatic agent for polyolefin resins, maximum residual content in the final material (QM) = 1000 mg/kg.31 December 2028 1116condensation products of formaldehyde with melamineAdditivePlastics(15)31 December 20281117condensation products of formaldehyde with ureaMonomer or other reactantPlastics(15)31 December 20281118condensation products of sorbitol and/or ethylene oxideAdditivePlasticsProvided that the product does not release ethylene glycol.31 December 20281119copolymer of methylmethacrylate with divinylbenzeneMonomer or other reactantPlastics31 December 20281120copolymer of methylmethacrylate with styrene, divinylbenzene and 1,3-butylene glycol-dimethacrylateMonomer or other reactantPlastics31 December 20281121copolymer of methylmethacrylate-butadiene-styrene-divinylbenzeneMonomer or other reactantPlastics31 December 2028112254453-03-1copper ethylenediaminetetraacetateAdditivePlasticsEDTA MTCtap = 60 μg/l.For copper, refer to Annex V.31 December 20281123630-372-573728-37-7cyclised rubberAdditiveRubber31 December 2028 1124203-630-6108-93-0cyclohexylalcohol Additive Polymer production aid Rubber31 December 20311125226-733-85459-93-8cyclohexylethylamineMonomer or other reactantRubber31 December 20311126-29965-97-7cyclooctadieneMonomer or other reactantRubber31 December 20281127cyclopentadieneMonomer or other reactantRubber31 December 20311128248-523-527554-26-3di isooctyl phthalateAdditivePlasticsMaximum residual content of the sum of all phthalates in the final material (QM) = 50000 mg/kg.31 December 20281129236-445-413372-18-4dicetyl phthalateAdditivePlastics75For rigid PVC, maximum residual content of the sum of all phthalates in the final material (QM) = 50000 mg/kg.31 December 20281130237-971-714117-96-5distearyl phthalateAdditivePlastics75For rigid PVC, maximum residual content of the sum of all phthalates in the final material (QM) = 50000 mg/kg.31 December 2028 1131diethoxydihydroquinoneMonomer or other reactantRubber50Phenols MTCtap = 50 μg/l.31 December 20281132diethylphthalateAdditivePlastics, rubberMaximum residual content of the sum of all phthalates in the final material (QM) = 50000 mg/kg.31 December 20311133205-450-3141-04-8diisobutyladipateAdditivePlastics, rubber15031 December 20311134247-977-126761-40-0diisodecylphthalateAdditivePlastics, rubberMaximum residual content of the sum of all phthalates in the final material (QM) = 50000 mg/kg.31 December 20281135204-212-6117-82-8dimethoxyethylphthalateAdditivePlasticsMaximum residual content of the sum of all phthalates in the final material (QM) = 50000 mg/kg.31 December 2028

1136dimethyl ester of polycondensed succinic acid with 2-(4-hydroxy-2,2,6,6-tetramethyl-1-piperidyl)-ethanolAdditivePlastics For polyethylene, maximum residual content of the sum of all phthalates in the final material (QM) = 3000 mg/kg. For polypropylene, maximum residual content of the sum of all phthalates in the final material (QM) = 5000 mg/kg. 31 December 20281137248-765-127987-25-3dimethylcyclohexylphthalateAdditivePlasticsMaximum residual content of the sum of all phthalates in the final material (QM) = 50000 mg/kg.31 December 20311138dimethylphenylthiuramAid to polymerisationRubber(42)31 December 20281139203-664-1109-31-9di-n-hexylazelateAdditivePlastics31 December 20281140202-577-697-39-2di-o-tolylguanidineMonomer or other reactantRubber31 December 20311141disproportionated rosin Additive Polymer production aid Rubber31 December 2031 1142distearyl-(4-hydroxy-3-methyl-5-tert-butyl)-benzyl-malonateAdditivePlasticsMaximum residual content in the final material (QM) = 5000 mg/kg.31 December 20281143201-555-384-72-0ethyl phthalyl ethyl glycolateAdditivePlastics31 December 20311144106-90-1acrylic acid, 2,3-epoxypropyl esterAdditiveRubber(21)In rubbers, not for use in products in contact with warm and hot water.31 December 20281145high, medium and low density polyethyleneMonomer or other reactantPlastics31 December 20281146hydrogenated polycyclopentadiene resinMonomer or other reactantPlastics31 December 20281147isodecyl alcohol Additive Polymer production aid Plastics, rubber31 December 20281148lauryldithiopropionateAdditiveRubber31 December 2028 114912068-40-5lithium aluminium silicate (2:1:1)AdditivePlasticsFor aluminium and lithium, refer to Annex V.If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 20281150melamine resins modified with butyl alcoholMonomer or other reactantRubberFor paints and varnishes.31 December 20281151694-91-75-methylene-2-norborneneMonomer or other reactantRubber31 December 20281152639-976-368441-63-4methylhydroxyethylcelluloseAdditivePlastics31 December 20281153-51064-12-1methylpentadieneMonomer or other reactantRubber31 December 20281154n-decyl n-octyl phthalateAdditivePlastics (25) (27) 31 December 20281155di-n-decyl phthalateAdditivePlastics (25) (27) 31 December 20311156Triethanolamine monolaurateAdditivePlasticsUse as an antistatic for polyolefins, maximum residual content in the final material (QM) = 3000 mg/kg.31 December 2028 1157200-820-074-89-5MonomethylamineAdditivePlastics2,5Used with dimethyl carbonate in the manufacture of modified polymethacrylate.31 December 20311158260-982-357843-53-5N,N,N',N'-tetrakis (2-hydroxypropyl)-adipamide Monomer or other reactant Additive Polymer production aid Aid to polymerisation RubberFor the production of polymer dispersions of polyolefins functionalised with acrylic and/or anhydride groups, used as coatings on metals, at a use rate of ≤ 6 % by dry weight of the dispersion.31 December 20311159N-octadecyl-beta (4'-hydroxy-3,5-di-tert-butylenyl)-propionateAdditiveRubber31 December 20281160230-451-07144-65-2ortho-diphenylglycidyl etherAdditivePlasticsFor films of vinyl chloride-vinylidene chloride copolymers, maximum residual content in the final material (QM) = 3000 mg/kg.31 December 2028

1161241-313-417281-74-2palmitoyl benzoyl methaneAdditivePlasticsFor rigid PVC and its copolymers, maximum residual content in the final material (QM) = 5000 mg/kg.31 December 20281162204-259-2118-55-8phenyl salicylateAdditivePlastics31 December 2031116370750-58-2polybetapineneAdditiveRubber31 December 20341164polybutylene terephthalate Additive Polymer production aid Plastics31 December 20371165polychlorotrifluoroethyleneMonomer or other reactantPlastics(38)31 December 20281166polyester derived from the condensation of adipic acid and ethylene glycolMonomer or other reactantPlastics(2)31 December 20281167607-461-224938-37-2polyethylene adipateAdditivePlastics31 December 203411689004-99-3polyethylene glycol monostearateAdditivePlastics(2)Provided that the product does not release mono- and diethylene glycols.31 December 20371169polyethylene glycol terephthalateMonomer or other reactantPlastics(2)31 December 2028 117036221-42-8polypropylene adipateAdditivePlastics31 December 202811719003-20-7polyvinyl acetateMonomer or other reactantPlastics, coatings31 December 20371172polyvinyl butyralMonomer or other reactantPlastics, coatings31 December 20281173polyvinyl chlorideMonomer or other reactantPlastics31 December 20371174polyvinyl ethyl etherAdditivePlastics, adhesives, coatingsViscosity 0,5-0,8 cP at 1 % in benzene at 20 °C.31 December 202811759003-44-5polyvinyl isobutyl etherMonomer or other reactantPlastics31 December 20281176polyvinyl tert-butyl etherMonomer or other reactantPlastics31 December 202811779002-85-1polyvinylidene chlorideMonomer or other reactantPlastics31 December 20371178potassium salt of maleic acid semiesterified with cetyl alcoholAdditivePlastics31 December 2028 1179Reaction product of 4-methylphenol with dicyclopentadiene and subsequent alkylation with isobutylAdditiveRubber150031 December 20281180Reaction product of N-phenyl-N'-(1-3-dimethylbutyl)p-phenylenediamine and tert-C10-C13 glycidyl thioether with predominantly C12 contentAdditiveRubber1,0 - expressed as primary aromatic amines Maximum dosage = 2,4 % (w/w). Only for contact times ≤ 10 min and temperatures ≤ 40 °C. Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 20281181268-213-368037-49-0sodium alkyl (C10-C18) sulfonateAdditivePlastics Use as an antistatic agent in PVC, maximum residual content in the final material (QM) = 15000 mg/kg. Use as an antistatic agent in polystyrene, maximum residual content in the final material (QM) = 25000 mg/kg. Use as an emulsifying agent in PVC and its copolymers, maximum residual content in the final material (QM) = 20000 mg/kg. Use as an emulsifying agent in polystyrene, maximum residual content in the final material (QM) = 50000 mg/kg. 31 December 2028 1182209-406-4577-11-7sodium dioctylsulfosuccinateAdditivePlasticsFor polyethylene, maximum residual content in the final material (QM) = 10000 mg/kg.31 December 20311183sodium dodecylbenzenesulfonateAdditivePlasticsIn the case of gaskets and mastics, maximum residual content in the final material (QM) = 20000 mg/kg.31 December 2031118429704-46-9sodium sulforicinateAdditivePlastics31 December 2028

1185 205-481-2 205-777-1 141-33-3 150-88-9 sodium butylxanthogenateMonomer or other reactantRubber(47)31 December 20281186zinc butylxanthogenateMonomer or other reactantRubber (47) For zinc, refer to Annex V. In rubbers, not for use in products in contact with warm and hot water.31 December 20281187205-440-9140-90-9sodium ethylxanthogenateMonomer or other reactantRubber(47)31 December 20311188zinc ethylxanthogenateMonomer or other reactantRubber (47) For zinc, refer to Annex V. 31 December 20281189sodium isopropylxanthogenateMonomer or other reactantRubber(47)31 December 20281190zinc isopropylxanthogenateMonomer or other reactantRubber (47) For zinc, refer to Annex V. 31 December 20281191sodium methylxanthogenateMonomer or other reactantRubber(47)31 December 20281192zinc methylxanthogenateMonomer or other reactantRubber (47) For zinc, refer to Annex V. 31 December 20281193sodium pentamethylenxanthogenateMonomer or other reactantRubber(47)31 December 2028 1194zinc pentamethylenxanthogenateMonomer or other reactantRubber (47) For zinc, refer to Annex V. 31 December 20281195sodium dibutyldithiocarbamateAid to polymerisationRubber(42)31 December 20311196zinc dibutyldithiocarbamateAid to polymerisationRubber (42) For zinc, refer to Annex V. 31 December 20281197copper dibutyldithiocarbamateAid to polymerisationRubber (42) For copper, refer to Annex V. 31 December 20281198sodium diethyldithiocarbamateAid to polymerisationRubber(42)31 December 2031119913681-87-3copper diethyldithiocarbamateAid to polymerisationRubber (42) For copper, refer to Annex V. 31 December 20281200sodium dimethyldithiocarbamateAid to polymerisationRubber(42)31 December 20311201137-29-1copper dimethyldithiocarbamateAid to polymerisationRubber (42) For copper, refer to Annex V. 31 December 20311202sodium ethylphenyldithiocarbamateAid to polymerisationRubber(42)31 December 2028 1203238-677-114634-93-6zinc ethylphenyldithiocarbamateAid to polymerisationRubber (42) For zinc, refer to Annex V. 31 December 20311204copper ethylphenyldithiocarbamateAid to polymerisationRubber (42) For copper, refer to Annex V. 31 December 2028120513878-54-1zinc pentamethylenedithiocarbamateAid to polymerisationRubber (42) For zinc, refer to Annex V. 31 December 20281206copper pentamethylenedithiocarbamateAid to polymerisationRubber (42) For copper, refer to Annex V. 31 December 20281207232-360-18007-43-0sorbitan sesquioleateAdditivePlastics31 December 20311208229-781-86729-96-0stearyl dithiopropionateAdditiveRubber31 December 20281209stearyl-(3,5-dimethyl-4-hydroxy-benzyl)thioglycolateAdditivePlasticsMaximum residual content in the final material (QM) = 5000 mg/kg.31 December 20281210202-387-395-05-6tetraethylthiuram monosulfide Monomer or other reactant Aid to polymerisation Rubber(42)31 December 20281211203-841-3111-17-1thiodipropionic acidAdditiveRubber(14)31 December 2031 1212triacetinAdditivePlastics31 December 20311213201-071-277-94-1tributylcitrateAdditivePlastics31 December 20311214tris-(2,4-di-tert-butyl phenyl) diphosphiteAdditiveRubberFor the MTCtap values of degradation products, refer to Table 4.31 December 202812151184-84-5vinylsulfonic acidMonomer or other reactantRubber31 December 20281216vinylsulfonic amideMonomer or other reactantRubber31 December 20281217232-723-49010-69-9zinc resinateAdditivePlasticsFor zinc, refer to Annex V.31 December 2028121878-67-12,2'-azobis(isobutyronitrile)Aid to polymerisationPlasticsMaximum dosage = 0,2 % (w/w).31 December 203112192372-21-6tert-butylperoxy isopropyl carbonate

Polymer production aid Aid to polymerisation Plastics0,1Maximum dosage = 0,5 % (w/w).31 December 20311220111-92-2di-n-butylamineAid to polymerisationPlastics, rubber1,031 December 2031 1221113693-69-9 tetramethyl-bis(4-hydroxyphenyl)methane (TMBPF), reaction product with epichlorohydrin (= TMBPF-diglycidyl ether or TMBPF-DGE) Monomer or other reactantCoatingsEpichlorohydrin MTCtap = 0.1 μg/l. (48) (49) 31 December 202812223844-45-9C.I. Food Blue 2 (or: triarylmethane; C.I. No 42090)AdditiveAllAdditional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 203112231934-21-0C.I. Food Yellow 4 (or: tartrazine (E102); C.I. No 19140)AdditiveAllAdditional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 20311224 12227-89-3; 1317-61-9 C.I. Pigment Black 11 (or: iron oxide black; C.I. No 77499)AdditiveAllFor iron, refer to Annex V.31 December 2028 122568186-91-4C.I. Pigment Black 28 (or: copper chromite; C.I. No 77428)AdditiveAllFor chromium and copper, refer to Annex V.31 December 2031122612062-81-6C.I. Pigment Black 33, (or: iron manganese trioxide; C.I. No 77537)AdditiveAllFor iron and manganese, refer to Annex V.31 December 20311227147-14-8C.I. Pigment Blue 15 (or: phthalocyanine blue (incl. 15:1, 15:2, 15:3, 15:4); C.I. No. 74160)AdditiveAllFor copper, refer to Annex V.Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 203112281345-16-0C.I. Pigment Blue 28 (or: cobalt aluminate; C.I. No. 77346)AdditiveAllFor aluminium and cobalt, refer to Annex V.31 December 2031122957455-37-5C.I. Pigment Blue 29 (or: ultramarine blue; C.I. No. 77007)AdditiveAllFor aluminium, refer to Annex V.31 December 2028123068187-11-1C.I. Pigment Blue 36 (or: cobalt chromite; C.I. No. 77343)AdditiveAllFor aluminium, chromium and cobalt, refer to Annex V.31 December 2031 123168412-74-8C.I. Pigment Blue 74 (or: cobalt zinc silicate; C.I. No. 77366)AdditiveAllFor cobalt and zinc, refer to Annex V.31 December 2031123212068-86-9C.I. Pigment Brown 11 (or: magnesium ferrite; C.I. No. 77495)AdditiveAllFor iron, refer to Annex V.31 December 2031123368186-90-3C.I. Pigment Brown 24 (or: chromium antimony titanate; C.I. No. 77310)AdditiveAllFor antimony and chromium, refer to Annex V.31 December 2031123412737-27-8C.I. Pigment Brown 29 (or: chromium iron oxide; C.I. No. 77500)AdditiveAllFor chromium and iron, refer to Annex V.31 December 203112351308-38-9C.I. Pigment Green 17 (or: chromium(III)oxide; C.I. No. 77288)AdditiveAllFor chromium, refer to Annex V.31 December 203112361328-53-6C.I. Pigment Green 7 (or: phthalocyanine green; C.I. No. 74260)AdditiveAllFor copper, refer to Annex V.Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2031

12373520-72-7C.I. Pigment Orange 13 (or: diazo ; C.I. No. 21110)AdditiveAllAdditional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 203112381309-37-1C.I. Pigment Red 101 (or: iron(III)oxide; C.I. No. 77491)AdditiveAll31 December 2031123912656-85-8C.I. Pigment Red 104 (or: lead chromate/molybdate/sulfate; C.I. No. 77605)AdditiveAll31 December 202812403049-71-6C.I. Pigment Red 178 (or: perylene red)AdditiveAllAdditional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2031 1241 40618-31-3 82643-43-4 C.I. Pigment Red 214 (or: condensation azo)AdditiveAllAdditional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2031124252238-92-3C.I. Pigment Red 242 (or: disazo condensation; C.I. No. 20067)AdditiveAll(38)Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028124343035-18-3C.I. Pigment Red 247 (or: monoazo; C.I. No. 15915)AdditiveAllAdditional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2031 12446358-87-8C.I. Pigment Red 38 (or: diazo; C.I. No. 21120)AdditiveAllAdditional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 203112455281-04-9C.I. Pigment Red 57:1 (D & C Red 7) (or: monoazo; C.I. No. 15850:1)AdditiveAllAdditional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2031124612769-96-9C.I. Pigment Violet 15 (or: ultramarine violet; C.I. No. 77007)AdditiveAll31 December 202812476358-30-1C.I. Pigment Violet 23 (or: oxazine; C.I. No. 51319)AdditiveAllAdditional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028 12481345-05-7C.I. Pigment White 5 (or: lithopone (coprecipitate of barium sulfate and zinc sulfide) ; C.I. No. 77115AdditiveAll31 December 202812495590-18-1C.I. Pigment Yellow 110 (or: aminoketone; C.I. No. 56280)AdditiveAllAdditional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 20311250269-103-868187-51-9C.I. Pigment Yellow 119 (or: zinc ferrite; C.I. No. 77496)AdditiveAll31 December 20311251603-331-4129423-54-7C.I. Pigment Yellow 191 (or: monoazo; C.I. No. 18795)AdditiveAllAdditional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 20311252232-353-38007-18-9C.I. Pigment Yellow 53 (or: nickel antimony titanate; C.I. No. 77788)AdditiveAll31 December 2031

12536528-34-3C.I. Pigment Yellow 65 (or: monoazo; C.I. No. 11740)AdditiveAllAdditional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 203112548005-02-5C.I. Solvent Black 7 (or: azine; C.I. No. 50415:1)AdditiveAllAdditional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 20281255201-353-581-48-1C.I. Solvent Violet 13 (or: anthraquinone; C.I. No. 60725)AdditiveAllAdditional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2031 1256109-58-0(2-aminoethyl)carbamic acidAid to polymerisationRubber Only to be used in elastomers having vinylidene fluoride as a monomer. Maximum residual content in the final material (QM) = 30 g/kg. 31 December 2028125736-86-81,1-bis(tert-butylperoxy)cyclohexaneAid to polymerisationRubber0,131 December 2031125895-35-21,3-bis(2-benzothiazolylmercaptomethyl) ureaAid to polymerisationRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 202812592212-81-91,3-bis(tert-butylperoxyisopropyl)benzeneAid to polymerisationRubber0,1In rubbers, not for use in products in contact with warm and hot water.31 December 20311260105-55-51,3-diethylthioureaAid to polymerisationRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 203112617691-02-31,3-divinyltetramethyldisilazaneAdditiveRubber31 December 2031 1262102-78-32-(2,6-dimethylmorpholinothio) benzthiazoleAid to polymerisationRubber(43)In rubbers, not for use in products in contact with warm and hot water.31 December 20281263102-77-22-(morpholinothio)benzothiazoleAid to polymerisationRubber150(43)Maximum residual content in the final material (QM) = 30 g/kg.31 December 2031126487-97-82,6-di-tert-butyl-4-(methoxymethyl)phenolAdditiveRubberFor the MTCtap values of degradation products, refer to Table 4.In rubbers, not for use in products in contact with warm and hot water.31 December 202812652668-47-52,6-di-tert-butyl-4-phenylphenolAdditiveRubberFor the MTCtap values of degradation products, refer to Table 4.In rubbers, not for use in products in contact with warm and hot water.31 December 2028126695-30-72-benzothiazyl-N,N-diethylthiocarbamyl sulfideAid to polymerisationRubber(43)In rubbers, not for use in products in contact with warm and hot water.31 December 2028126796-45-72-mercaptoimidazolineAid to polymerisationRubber2,5Maximum residual content in the final material (QM) = 30 g/kg.31 December 2028 126826511-61-53,3-bis(tert-butylperoxy)butanoic acid, n-butyl esterAid to polymerisationRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 2028126919262-37-44,4'-bis(aminocyclohexyl)methane carbamateAid to polymerisationRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 20281270101-70-24,4'-dimethoxydiphenylamineAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 2028127195-80-74-methyl-m-phenylenediamineAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 2028127215570-10-24-tert-butyl-2-methylthiophenolAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 202812734545-30-64-tert-butylthiophenol, zinc saltAdditiveRubberFor zinc, refer to Annex V.In rubbers, not for use in products in contact with warm and hot water.31 December 2028

1274140-04-5acetylricinoleic acid, butyl esterAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 20311275141-17-3adipic acid, bis[2-(2-butoxyethoxy)-ethyl) esterAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 203112762451-84-5adipic acid, dibenzyl esterAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 20281277105-97-5adipic acid, didecyl esterAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 2028127827178-16-1adipic acid, diisodecyl esterAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 203112791330-86-5adipic acid, diisooctyl esterAdditiveRubber31 December 20311280110-29-2adipic acid, n-decyl n-octyl esterAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 2028 1281123-77-3azodicarbonamideAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 20311282201-255-280-17-1benzenesulfonohydrazideAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 20311283bis(2-hydroxy-3-tert-octyl-5-methylphenyl)methaneAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 20281284246-709-025176-75-4caproic acid, diester with triethyleneglycolAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 20281285203-361-4106-10-5caprylic acid, diester with triethyleneglycolAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 2028128661789-98-8corkAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 2028 12873399-73-3cyclohexylethylamineAid to polymerisationRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 20281288149-82-6dibutyldithiocarbamic acid, N,N-dimethylcyclohexylamine saltAid to polymerisationRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 20281289109-89-7diethylamineAid to polymerisationRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 20311290502-55-6diethylxanthogen disulfideAdditive or polymer production aidRubber(47)In rubbers, not for use in products in contact with warm and hot water.31 December 20281291123-81-9ethyleneglycol bis(mercaptoacetate)Aid to polymerisationRubberMaximum residual content in the final material (QM) = 30 g/kg.31 December 2031129236290-04-7formaldehyde-2-naphthalenesulfonic acid, copolymer, sodium salt Additive Polymer production aid Rubber(15)In rubbers, not for use in products in contact with warm and hot water.31 December 2034 129393-35-4formaldehyde-phenol, copolymerAdditiveRubber(15)The copolymer cannot contain additives that are not listed in the organics EU Positive List.31 December 2028129468476-37-9glue, of animal originAdditive or polymer production aidRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 2028129516941-12-1hexachloroplatinic acidAdditive or polymer production aidRubber31 December 20311296999-97-3hexamethyldisilazaneAdditive or polymer production aidRubber31 December 20311297143-06-6hexamethylenediamine carbamateAid to polymerisationRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 20311298213-680-01000-90-4isopropylxanthogenate, zinc saltAid to polymerisationRubber

(47) For zinc, refer to Annex V. In rubbers, not for use in products in contact with warm and hot water.31 December 20281299106-18-3lauric acid, butyl esterAdditiveRubber31 December 2028 130028693-00-7monochloroacetic acid, ester with 5-(hydroxymethyl)-bicyclo[2.2.1]hept-2-eneMonomer or other reactantRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 20281301montan wax, consisting of: 1) montanic acids C26-C32, 2) esters thereof with ethyleneglycol and/or 1,3-butanediol 3) and/or calcium saltsAdditiveRubber31 December 2028130210591-84-1N,N'-dimethyldiphenylthiuram disulfideAid to polymerisationRubber(42)Maximum residual content in the final material (QM) = 30 g/kg.31 December 20311303N-alkyl(C14-C18)-N,N’,N’-triacetoyl-1,3-diaminopropaneAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 20281304N-phenyl-N’-isohexyl-p-phenylenediamineAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 20281305142-77-8oleic acid, butyl esterAdditiveRubber31 December 2028 13067620-75-9oleic acid, dibutylamine saltAid to polymerisationRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 202813071912-84-1oleic acid, tin(II) saltAid to polymerisationRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 20281308117-97-5pentachlorothiophenol, zinc saltAdditive or polymer production aidRubberFor zinc, refer to Annex V.In rubbers, not for use in products in contact with warm and hot water.31 December 2028130998-77-1pentamethylenedithiocarbamic acid, piperidine saltAid to polymerisationRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 20281310136-04-9pentamethylenedithiocarbamic acid, potassium saltAid to polymerisationRubber (42) For zinc, refer to Annex V. Maximum residual content in the final material (QM) = 30 g/kg.31 December 20281311107-71-1peracetic acid, tert-butyl esterAid to polymerisationRubber0,1In rubbers, not for use in products in contact with warm and hot water.31 December 2031 131289-03-8petrolatumAdditiveRubber31 December 20281313117-84-0phthalic acid, di-n-octyl esterAdditiveRubber300 (25) (27) 31 December 2028131426762-92-5p-menthane hydroperoxideAid to polymerisationRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 20311315p-nonylphenyl phosphite, 2,2-bis(3-tert-butyl-4-hydroxyphenyl) propane esterAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 2028131625101-03-5polypropyleneglycol adipateAdditiveRubber(30)31 December 20371317232-299-08002-13-9rapeseed oilAdditiveRubber31 December 2028131827214-90-0sebacic acid, diisooctyl esterAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 202813192432-87-3sebacic acid, di-n-octyl esterAdditiveRubber31 December 203113201344-08-7sodium polysulfideAdditive or polymer production aidRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 2031

1321soybean oil, sulfur treated (factice)AdditiveRubber25031 December 2028132293-73-2tetrabutylthiuram monosulfideAid to polymerisationRubber(42)In rubbers, not for use in products in contact with warm and hot water.31 December 202813237772-99-8tin chlorideAid to polymerisationRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 2031132419484-26-5tridecyl mercaptanAdditive or polymer production aidRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 20281325117-56-8triethanolamine phosphateAdditiveRubber500Only to be used in mould release agents.31 December 2028 Table 2 European positive lists of groups of starting substances for organic materials EUPL NumberEC NumberCAS NumberFCM substance Number (A)Starting substance group nameTechnical function (B)Drinking water contact materials (C)Maximum Tolerable Concentration at the tap in organic materials (MTCtap, organics) in μg/lTotal Maximum Tolerable Concentration at the tap (MTC(T)tap, organics) in μg/l (D)Conditions of useExpiry dateValue for the starting substanceValues for other relevant chemical species (E)13263alcohols, aliphatic, monohydric, saturated, linear, primary (C4-C22)Monomer or other reactantAll31 December 203113274mixture of (40 % w/w) 2,2,4- trimethylhexane–1,6-diisocyanate and (60 % w/w) 2,4,4-trimethylhexane–1,6-diisocyanateMonomer or other reactantAll(16) Maximum residual content in the final material (QM) = 1 mg/kg in final product expressed as isocyanate moiety. Verification of compliance by residual content per food contact surface area (QMA). 31 December 203413285trialkyl(C5-C15) acetic acid, 2,3- epoxypropyl esterMonomer or other reactantAll0,1Maximum residual content in the final material (QM) = 1 mg/kg in the product expressed as epoxy group. Molecular weight of the epoxy group is 43 Da.31 December 2031 13296trialkyl acetic acid (C7-C17), vinyl estersMonomer or other reactantAll2,5Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method.31 December 203113308acetylated mono- and diglycerides of fatty acidsAdditive or polymer production aidAll(31)31 December 203113319acids, C2-C24, aliphatic, linear, monocarboxylic from natural oils and fats, and their mono-, di- and triglycerol esters (branched fatty acids at naturally occurring levels are included) Polymer production aid Other (processing aid) All31 December 2031133210acids, C2-C24, aliphatic, linear, monocarboxylic, synthetic and their mono-, di- and triglycerol esters Polymer production aid Additive Other (processing aid) All31 December 2031133311acids, aliphatic, monocarboxylic (C6-C22), esters with polyglycerolAdditive or polymer production aidAll31 December 2034 133412acids, fatty, from animal or vegetable food fats and oils Additive or polymer production aid Other (processing aid) All31 December 2031133513alcohols, aliphatic, monohydric, saturated, linear, primary (C4-C24)Additive or polymer production aidAll31 December 2031133614n-alkyl(C10-C13)benzenesulfonic acid

Additive Polymer production aid All150031 December 2031133715alkyl, linear with even number of carbon atoms (C12-C20) dimethylaminesAdditive or polymer production aidAll150031 December 2031133816alkyl(C8-C22)sulfonic acids Additive Polymer production aid All30031 December 2031133917alkyl(C8-C22)sulfuric acids, linear, primary with an even number of carbon atomsAdditive or polymer production aidAll31 December 2031134019N,N-bis(2-hydroxyethyl)alkyl (C8-C18)amine Additive Polymer production aid All(7)31 December 2031134120N,N-bis(2-hydroxyethyl)alkyl (C8-C18)amine hydrochloridesAdditive or polymer production aidAll(7)31 December 2031 134222castor oil, mono- and diglyceridesAdditive or polymer production aidAll31 December 2031134323chlorides of choline esters of coconut oil fatty acidsAdditive or polymer production aidAll45Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method.31 December 2031134425cresols, butylated, styrenatedAdditive or polymer production aidAll60031 December 20311345265,7-di-tert-butyl-3-(3,4- and 2,3-dimethylphenyl)-3H-benzofuran-2-one containing: a) 5,7-di-tert-butyl-3-(3,4-dimethylphenyl)-3H-benzofuran-2-one (80 to 100 % w/ w) and b) 5,7-di-tert-butyl-3-(2,3-dimethylphenyl)-3H-benzofuran-2-one (0 to 20 % w/w)Additive or polymer production aidAll25031 December 20311346279,10-dihydroxy stearic acid and its oligomersAdditive or polymer production aidAll25031 December 2028 134728di-n-octyltin bis(n-alkyl(C10-C16) mercaptoacetate)Additive or polymer production aidAll(10)31 December 2031134831di-n-octyltin dimaleate, esterifiedAdditive or polymer production aidAll(10)31 December 2031134938glass fibresAdditiveAllGlass according to Annex IV.31 December 2031135040glycerol, esters with acetic acidAdditive or polymer production aidAll31 December 2031135141glycerol, esters with acids, aliphatic, saturated, linear, with an even number of carbon atoms (C14-C18) and with acids, aliphatic, unsaturated, linear, with an even number of carbon atoms (C16-C18)Additive or polymer production aidAll31 December 2031135242glycerol, esters with butyric acidAdditive or polymer production aidAll31 December 2031135343glycerol, esters with erucic acidAdditive or polymer production aidAll31 December 2031 135444glycerol, esters with 12-hydroxystearic acidAdditive or polymer production aidAll31 December 2031135545glycerol, esters with lauric acidAdditive or polymer production aidAll31 December 2031135646glycerol, esters with linoleic acidAdditive or polymer production aidAll31 December 2031135747glycerol, esters with myristic acidAdditive or polymer production aidAll31 December 2031135848glycerol, esters with nonanoic acidAdditive or polymer production aidAll31 December 2031135949glycerol, esters with oleic acid Polymer production aid Other (processing aid) All31 December 2031136050glycerol, esters with palmitic acidAdditive or polymer production aidAll31 December 2031136151glycerol, esters with propionic acidAdditive or polymer production aidAll31 December 2031136252glycerol, esters with ricinoleic acidAdditive or polymer production aidAll31 December 2031

136353glycerol, esters with stearic acidAdditive or polymer production aidAll31 December 2031136465mixture of 4-(2-benzoxazolyl)-4′-(5-methyl-2-benzoxazolyl)stilbene, 4,4′-bis(2-benzoxazolyl) stilbene and 4,4′-bis(5-methyl-2-benz oxazolyl)stilbeneAdditiveAllNot more than 0,05 % (w/w) (quantity of substance used/ quantity of the formulation). Mixture obtained from the manufacturing process in the typical ratio of (58-62 %):(23-27 %): (13-17 %).31 December 2031136566mono-n-octyltin tris(alkyl (C10-C16) mercaptoacetate)Additive or polymer production aidAll(11)31 December 2031136667montanic acids and/or their esters with ethyleneglycol and/or with 1,3-butanediol and/or with glycerol Polymer production aid Other (processing aid) All31 December 2031136768phosphoric acid, mono- and di-n-alkyl (C16 and C18) estersAdditive or polymer production aidAll2,531 December 2031 136869phosphorous acid, tris(nonyl-and/ or dinonylphenyl) esterAdditiveAll1500 In the absence of plasticiser, maximum residual content in the final material (QM) = 3000 mg/kg. For butadiene-styrene copolymer, maximum residual content in the final material (QM) = 15000 mg/kg. 31 December 2028136973polyesters of 1,2-propanediol and/ or 1,3- and/or 1,4-butanediol and/ or polypropyleneglycol with adipic acid, which may be end-capped with acetic acid or fatty acids C12-C18 or n-octanol and/or n-decanolAdditive or polymer production aidAll (30) (31) 31 December 2034137078polyethyleneglycol (EO = 1-50) monoalkylether (linear and branched, C8-C20) sulfate, saltsAdditive or polymer production aidAll25031 December 2034 137180powders, flakes and fibres of brass, bronze, copper, stainless steel, tin, iron and alloys of copper, tin and ironAdditiveAllFor relevant elements, refer to Annex V.31 December 2031137289stearic acid, esters with ethyleneglycolAdditive or polymer production aidAll(2)31 December 2031137350-21-599lactic acid Monomer or other reactant Polymer production aid Other (processing aid) All31 December 2034137450-99-7102glucoseMonomer or other reactantAll31 December 2037137557-55-61091,2-propanediol Monomer or other reactant Additive Polymer production aid All31 December 20341376 59-02-9 10191-41-0 110α-tocopherol Polymer production aid Other (processing aid) All31 December 2034137775-56-9135propylene oxideMonomer or other reactantAll0,1Maximum residual content in the final material (QM) = 1 mg/kg in the product.31 December 2028 1378107-01-72242-buteneMonomer or other reactantAll31 December 20341379107-88-02281,3-butanediolMonomer or other reactantAll31 December 20341380 110-98-5 25265-71-8 257dipropyleneglycolMonomer or other reactantAll31 December 20341381138-22-7322lactic acid, butyl esterAdditive or polymer production aidAll31 December 20311382598-32-33573-buten-2-olMonomer or other reactantAll0,1 Only to be used as a co-monomer for the preparation of polymeric additive. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method.

31 December 202813831330-43-4407sodium tetraborateAdditive or polymer production aidAllFor boron, refer to Annex V.31 December 2034 13841332-37-2409iron oxideAdditiveAllFor iron, refer to Annex V.If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 203113853724-65-0467crotonic acid Monomer or other reactant Additive All(34)31 December 202813864080-31-34741-(3-chloroallyl)-3,5,7-triaza-1-azoniaadamantane chlorideAdditive or polymer production aidAll1531 December 20311387501aluminium fibres, flakes and powdersAdditiveAllFor aluminium, refer to Annex V.If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2031 13887631-86-9504silicon dioxide Additive Polymer production aid All For synthetic amorphous silicon dioxide: primary particles of 1 – 100 nm which are aggregated to a size of 0,1 – 1 μm which may form agglomerates within the size distribution of 0,3 μm to the mm size. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 203713897664-93-9511sulfuric acid Additive Polymer production aid AllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2034 13907704-34-9514sulfurAid to polymerisationAll31 December 203413917771-44-0518arachidonic acidMonomer or other reactantAll31 December 202813927772-98-7519sodium thiosulfateAdditive or polymer production aidAll(18)31 December 20341393 9003-11-6 106392-12-5 551poly(ethylene propylene) glycolOther (processing aid)All31 December 2028139463148-62-9575polydimethylsiloxane (MW > 6800 Da) Monomer or other reactant (base oil) Additive Polymer production aid Other (processing aid) AllViscosity at 25 °C not less than 100 cSt (100 × 10-6 m2/s).31 December 2034139510377-51-2588lithium iodideAdditive or polymer production aidAll (6) For lithium, refer to Annex V. 31 December 2031139611104-61-3593cobalt oxideAdditive or polymer production aidAllFor cobalt, refer to Annex V.31 December 2031 139711129-60-5594manganese oxideAdditiveAllFor manganese, refer to Annex V.If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 20311398 12004-14-7 37293-22-4 598calcium sulfoaluminateAdditiveAllFor aluminium, refer to Annex V.If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028139912626-88-9606manganese hydroxideAdditive or polymer production aidAllFor manganese, refer to Annex V.If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2031

140012751-22-3607iron phosphideAdditive or polymer production aidPlasticsFor iron, refer to Annex V.Only to be used in PET polymers and copolymers.31 December 2031140113463-67-7610titanium dioxide Additive Polymer production aid AllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028140217194-00-2625barium hydroxideAdditive or polymer production aidAllFor barium, refer to Annex V.If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2034140325013-16-5635tert-butyl-4-hydroxyanisoleAdditiveAll150031 December 2031 140425322-68-3638polyethyleneglycol Monomer or other reactant Additive Polymer production aid Aid to polymerisation Other (processing aid) All31 December 2034140525513-64-8641mixture of (35-45 % w/w) 1,6-diamino-2,2,4-trimethylhexane and (55-65 % w/w)1,6-diamino-2,4,4-trimethylhexaneMonomer or other reactantAll2,531 December 20341406 68515-48-0 28553-12-0 728phthalic acid, diesters with primary, saturated C8-C10 branched alcohols, more than 60 % C9Additive or polymer production aidAll (25) (31) Only to be used as: (a) plasticiser; or (b) technical support agent in concentrations up to 0,1 % in the product. 31 December 2037 140768855-54-9734diatomaceous earth, soda ash flux-calcinedAdditive or polymer production aidAllIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2034140873138-82-6741resin acids and rosin acids Monomer or other reactant Other (processing aid) All31 December 20311409789hydrogenated homopolymers and/or copolymers made of 1-hexene and/or 1-octene and/or 1-decene and/or 1-dodecene and/or 1-tetradecene (MW: 440–12000)Additive or polymer production aidAll Average molecular weight not less than 440 Da. Viscosity at 100 °C not less than 3,8 cSt (3,8 × 10-6 m2/s). 31 December 2034 1410 90751-07-8 82451-48-7 790poly(6-morpholino-1,3,5-triazine- 2,4-diyl)-[(2,2,6,6-tetramethyl-4- piperidyl)imino)] hexa-methylene- [(2,2,6,6-tetramethyl-4-piperidyl)imino)] Additive Polymer production aid All250 Average molecular weight not less than 2400 Da. Residual content of morpholine < 30 mg/kg, of N,N′-bis(2,2,6,6-tetramethylpiperidin-4-yl)hexane–1,6-diamine < 15000 mg/kg, and of 2,4-dichloro-6-morpholino-1,3,5-triazine < 20 mg/kg. 31 December 20341411799polyethyleneglycol (EO = 1-50) ethers of linear and branched primary (C8-C22) alcohols Polymer production aid Other (processing aid) All90In compliance with the maximum ethylene oxide content as laid down in the purity criteria for food additives in Commission Regulation (EU) No 231/2012.31 December 20371412801acids, C2-C24, aliphatic, linear, monocarboxylic, from natural oils and fats, lithium saltAdditive or polymer production aidAllFor lithium, refer to Annex V.31 December 2031

1413805titanium dioxide, coated with a copolymer of n-octyltrichlorosilane and [aminotris(methylenephosphonic acid), penta sodium salt]Additive or polymer production aidAllThe content of the surface treatment copolymer of the coated titanium dioxide is less than 1 % w/w.31 December 20311414810neopentyl glycol, diesters and monoesters with benzoic acid and 2-ethylhexanoic acidAdditive or polymer production aidAll250(31)31 December 20311415815trimethylolpropane, mixed triesters and diesters with benzoic acid and 2-ethylhexanoic acidAdditive or polymer production aidAll250(31)31 December 20311416878 acids, fatty (C8-C22) from animal or vegetable fats and oils, esters with branched alcohols, aliphatic, monohydric, saturated, primary (C3-C22) Additive or polymer production aidAll31 December 2031 1417879 acids, fatty (C8-C22) from animal or vegetable fats and oils, esters with alcohols, linear, aliphatic, monohydric, saturated, primary (C1-C22) Additive or polymer production aidAll31 December 20311418880acids, fatty (C8-C22), esters with pentaerythritol Polymer production aid Other (processing aid) All31 December 20311419128-44-99021,2-benzisothiazol-3(2H)-one 1,1-dioxide, sodium saltAdditive or polymer production aidAllThe substance shall comply with the specific purity criteria as set out in Commission Regulation (EU) No 231/2012.31 December 20341420924trimethylolpropane, mixed triesters and diesters with n-octanoic and n-decanoic acidsAdditive or polymer production aidPlastics2,5Only for use in PET.31 December 2037 1421939402-02-5974phosphorous acid, mixed 2,4-bis(1,1-dimethylpropyl)phenyl and 4-(1,1-dimethylpropyl)phenyl triestersAdditive or polymer production aidAll 500 - expressed as the sum of the phosphite and phosphate forms of the substance, 4-tert-amylphenol and 2,4-di-tert-amylphenol 50 - for 2,4-di-tert-amylphenol 31 December 203714221046zinc oxide, nanoparticles, coated with [3-(methacryloxy)propyl] trimethoxysilane (EUPL No 0695)Additive or polymer production aidPlasticsFor zinc, refer to Annex V. Only to be used in unplasticised polymers. The restrictions and specifications specified for substance with EUPL Number 0695 shall be respected. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2037 14231053fatty acids, C16-C18 saturated, esters with dipentaerythritolAdditive or polymer production aidAllOnly to be used when produced from a fatty acid precursor that is obtained from edible fats or oils.31 December 20371424 7695-91-2 58-95-7 1055α-tocopherol acetateAdditive or polymer production aidPlastics Only to be used as antioxidant in polyolefins. The substance or its hydrolysis products are authorised food additives and compliance with Article 11(3) of Commission Regulation (EU) No 10/2011 shall be verified. 31 December 203714251062mixture composed of 97 % tetraethyl orthosilicate (TEOS) with CAS No. 78-10-4 and 3 % hexamethyldisilazane (HMDS) with CAS No. 999-97-3Monomer or other reactantAllOnly to be used for the production of recycled PET and at up to 0,12 % (w/w).31 December 2037

14261075montmorillonite clay modified with hexadecyltrimethylammonium bromideAdditive or polymer production aidPlastics Only to be used as an additive at up to 4,0 % w/w in polylactic acid for cold water applications. Can form nanoform platelets thinner than 100 nm in one or two dimensions. Such platelets must be aligned parallel to the polymer surface and fully integrated into the polymer. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 14271077titanium dioxide surface-treated with fluoride-modified aluminaAdditive or polymer production aidAll Only to be used at up to 25,0 % w/w, including in the nanoform. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 20311428castor oil fatty acids, dehydrated Monomer or other reactant Other (processing aid) Rubber, coatings31 December 2034142961790-39-4castor oil fatty acids, hydrogenated Monomer or other reactant Additive Coatings, lubricants31 December 2031 143055965-84-95-chloro-2-methyl-2H-isothiazol-3-one (CAS No. 26172-55-4) and 2-methyl-2H-isothiazol-3-one (CAS No. 2682-20-4), mixture (3:1)Other (in-can preservative)Coatings7,5 Restriction = 0,025 mg/dm2. Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 3.4 and 4.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034143168938-15-8fatty acids, coco hydrogenatedMonomer or other reactantCoatings31 December 20341432110-54-3n-hexane, incl. structural isomers up to 40% (cyclohexane < 3 %) List No. 925-292-5Polymer production aidAll250MTC does not need to be verified when process temperature > 100 °C.31 December 2031143393685-81-5isododecane (main isomer: 2,2’,4,6,6’-pentamethylheptane)Polymer production aidPlastics2,531 December 2034 1434926-099-9stone woolAdditiveRubber Diameter > 1 μm (average diameter 5-30 μm). If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 20311435acrylic acid, esters with alcohols, monohydric, aliphatic, saturated, C1-C18Monomer or other reactantCoatings300 - expressed as acrylic acid(21)31 December 20311436adipic acid, esters with alcohols, monohydric, aliphatic, primary, saturated, (C6-C12)AdditivePlastics31 December 20311437addition products of trivinylcyclohexane and alpha, omega-dihydrogen-polyhydrogenmethyldimethylsiloxanesMonomer or other reactantSiliconeMaximum dosage = 10% (w/w).31 December 2031 1438alkadienes (C3-C8)Monomer or other reactantCoatingsMaximum residual content in the final material (QM) = 1 mg/kg in the product.31 December 20311439alkoxysilanes with functional groups, e.g. vinyl, methacryl, amino or glycidyl groupsPolymer production aidPlasticsMaximum dosage = 0,5 % (w/w) based on the filler, or maximum 0,3 % (w/w) based on the plastic component31 December 20311440alkylarylsulfonic acidPolymer production aidPlasticsMaximum dosage = 3 % (w/w).31 December 20311441alkyl(C8-C18)benzene sulfonates, sodium saltsPolymer production aidRubber(41)31 December 20311442alkyl(C8-C18)naphthalene sulfonates, sodium saltsPolymer production aidRubber(41)31 December 20311443esters of alkyl(C1-C8)-silicic acid or orthosilicic acid with aliphatic monohydric alcohols (C2-C4) and the monomethyl ether of ethanediol (methylglycol) and their condensation productsAid to polymerisationSiliconeMaximum dosage = 3 % (w/w).31 December 2031

1444amide of aliphatic carboxylic acids, C8-C22Polymer production aidSiliconeMaximum dosage = 1,5 % (w/w).31 December 203114453-aminocrotonic acid, esters with butyleneglycolAdditiveCoatings31 December 203114463-aminocrotonic acid, esters with mono- or dihydric alcoholsAdditiveCoatings31 December 20311447carbon fibresAdditiveRubberCarbon fibres according to EUPL Number 2041, Annex IV.31 December 20311448condensation products of ethylene oxide with alcohols (C3-C18), phenolalkyl (C4-C9), and their sulfonated, sulfurated or phosphated derivated Additive Polymer production aid Rubber31 December 20311449cyclic organopolysiloxane with methylgroups, alone or n-alkyl (C2-C32)-groupMonomer or other reactant (base oil)Lubricants31 December 20311450α,ω-dicarboxylic acids (C6-C12), aliphatic, unbranchedMonomer or other reactantAll31 December 2031 1451fatty acids (unbranched, saturated and unsaturated, with an even number of carbon atoms, C8-C22, with a maximum content of 2 % unsaponifiable matter), as compounds with bis(2-hydroxyethyl)amine Additive Polymer production aid Plastics150031 December 20311452fatty acids (unbranched, saturated and unsaturated, with an even number of carbon atoms, C8-C22, with a maximum content of 2 % unsaponifiable matter), amides of Additive Polymer production aid Aid to polymerisation Plastics, rubber31 December 20311453fatty acids (unbranched, saturated and unsaturated, with an even number of carbon atoms, C8-C22, with a maximum content of 2 % unsaponifiable matter), esterified with alcohols, monohydric, primary, unbranched, saturated, C4-C18, as well as oleyl alcohol Additive Polymer production aid Plastics31 December 2031 14549003-36-5formaldehyde, polymer with 2-(chloromethyl)oxirane and phenol (Novolac glycidyl ether, NOGE)Monomer or other reactantCoatings2,5 - expressed as the sum of NOGE and its hydrolysis products bisphenol F MTCtap = 2,5 μg/l epichlorohydrin MTCtap = 0,1 μg/l (15) (49) Only to be used in powder coatings.31 December 20311455glycerol esters with linear fatty acids saturated or not with an even number of carbon C8-C20 and/or adipic acid, citric acid, oxystearin acid and ricinoleic acidAdditiveCoatings31 December 20311456methacrylic acid, esters with alcohols, monohydric, aliphatic saturated, C1-C18Monomer or other reactantRubber300 - expressed as methacrylic acid(22)31 December 20311457mono-n-octyltin tris(maleic acid half ester), prepared with C1-C18, primary, unbranched, saturated alcohols Additive Polymer production aid Plastics(11)31 December 20311458mono-n-octyltin tris[monoalkyl(C1-C18) maleate] Additive Polymer production aid Plastics(11)31 December 2031 1459organopolysiloxanes, containing methylgroups on each silicon atom which can be partially replaced by alkenyl(C2-C32)groups, alkyl (C2-C32)groups, hydroxylgroups, hydrogen, disubstituted alkylamines and/or hydroxylated alkylgroups, acetoxy and/or alkoxy groups and their condensation products with polyethyleneglycol and/or polypropyleneglycol, fluorinated alkylgoups, and phenylgroups

Monomer or other reactant Additive (polymeric) Coatings, silicone31 December 2031 1460organopolysiloxanes, linear and branched, with methyl groups alone and/or n-alkyl(C2-C32)-, and/or phenyl-2, and/or vinyl-, and/or hydroxyl-, and/or alkoxy(C1-C4)-, and/or hydrogen-, and/or carboalkoxyalkyl(-(CH2)2-17-C(O)-O-(CH2)0-17CH3)-, and/or hydroxyalkyl(C1-C3)-groups Monomer or other reactant Additive (polymeric) Rubber, siliconeIt may not contain cyclic polysiloxanes that beside the phenyl group bear a hydrogen atom or a methyl group at the same silicon atom.31 December 20311461organopolysiloxanes, linear or branched, as mentioned PM/REF No. 69848, but in addition with up to max. 5 % hydrogen and/or alkoxy(C2-C4) and/or carboalkoxyalkyl (-(CH2)2-17-C(O)-O-(CH2)0-17CH3)- and/or hydroxyalkyl(C1-C3) groups attached to the silicon atom Monomer or other reactant Additive (polymeric) Rubber, silicone31 December 2031 1462organopolysiloxanes, linear or branched and/or cyclic, with methyl groups alone or with n-alkyl(C2-C32), phenyl and/or hydroxyl groups attached to the silicon atom, and their condensation products with polyethylene and/or polypropyleneglycol Monomer or other reactant Additive (polymeric) Rubber, siliconeIt may not contain cyclic polysiloxanes that beside the phenyl group bear a hydrogen atom or a methyl group at the same silicon atom.31 December 20311463 68083-14-7 73138-88-2 68440-81-3 organopolysiloxanes, linear or branched with methyl- or phenylgroupsMonomer or other reactant (base oil)Plastics, lubricants31 December 20371464 9016-00-6 63148-62-9 68037-74-1 organopolysiloxanes, linear or branched with methylgroupsMonomer or other reactant (base oil)Plastics, lubricants31 December 20311465organopolysiloxanes with vinyl groups attached to the silicon atom Monomer or other reactant Additive (polymeric) Rubber, silicone31 December 2031146664741-56-6petroleum residues, vacuum distilledMonomer or other reactant (resin)Rubber31 December 2031 146792062-05-0petroleum residues, thermal cracked vacuumMonomer or other reactant (resin)Rubber31 December 20311468platinum complexesAid to polymerisationSilicone31 December 20311469polyalcoxyesters of acids, fatty with an even number of carbon (C8-C24)AdditivePlastics31 December 2031147068037-01-4poly 1-decene hydratedMonomer or other reactant (base oil)LubricantsImpurities of hydrocarbons with number of Carbon smaller than 30 not more than 1,5 %, free of naphthene, aromatics and PAH.31 December 20341471polydienic resin, syntheticAdditiveAll31 December 20311472polydimethyl siloxanes and polydimethyl silicones, 3-aminopropyl-group terminated, polymers with 1-isocyanato-3-isocyanatomethyl-3,5,5-trimethylcyclohexane Monomer or other reactant Additive (polymeric) Rubber, silicone(16)Note conditions of use for 1-isocyanato-3-isocyanatomethyl-3,5,5-trimethylcyclohexane (EUPL Number 0410) and 1-amino-3-aminomethyl-3,5,5-trimethylcyclohexane (EUPL Number 0391).31 December 2031 1473 polydimethyl siloxanes and polydimethyl silicones, 3-aminopropyl-group terminated, polymers with

bis(4-isocyanatocyclohexyl)methane Monomer or other reactant Additive (polymeric) Rubber, silicone(16)Note conditions of use for bis(4-isocyanatocyclohexyl)methane (EUPL Number 0420) and bis(4-aminocyclohexyl)methane (EUPL Number 0366).31 December 20311474polyethylene glycol ethers of monohydric aliphatic alcohols (C12-C20) and of alkylphenols (C2-C9)Polymer production aidSilicone31 December 203114759002-98-6polyethyleneimineAdditivePlastics, coatingsFor polypropylene as an anchoring agent: ≤ 0,05 μg/dm2 provided that the product does not release ethyleneimine.31 December 20341476polyethylene oxide (8-14), esterified with lauric acid, oleic acid, ricinoleic acid and/or stearic acid Monomer or other reactant Other Rubber, coatings31 December 20311477polyethylene oxide, molecular weight > 200 (pEO) Additive Polymer production aid Plastics31 December 2031 1478polyethylene oxide(4-14)ether of octyl- and/or nonylphenolPolymer production aidPlastics, rubber25031 December 20311479polyethylene oxide(4-14)ethers of monohydric, primary, unbranched, saturated C12-C18 alcoholsAdditivePlastics25031 December 20311480polypropylene oxide, esterified with lauric acid, oleic acid, ricinoleic acid and/or stearic acid Polymer production aid Aid to polymerisation Plastics31 December 20311481polysaccharidesPolymer production aidRubber31 December 203114829003-53-6polystyrene (with pentane as expansion agent)Monomer or other reactant (resin)Plastics, rubber31 December 20311483polyterpenesAdditiveLubricants31 December 2031148425213-24-5polyvinyl alcohol, manufactured by saponification of polyvinyl acetate, with a degree of saponification ≥ 20 %Polymer production aidPlasticsMaximum dosage = 1 % (w/w).31 December 2034 1485polyvinyl alcohol, partially acetylated with < 20 % acetyl groups and a K-value of > 40Polymer production aidCoatings, silicone31 December 2031148671011-24-0quaternary ammonium compounds, benzyl(hydrogenated tallow alkyl)dimethyl, chlorides, compounds with bentonite Polymer production aid Additive Lubricants31 December 2031148768953-58-2quaternary ammonium compounds, bis(hydrogenated tallow alkyl)dimethyl, salts with bentonite Polymer production aid Additive Lubricants31 December 20311488 reticulated cationic polyalkyleneamine a) epichlorhydric polyamide resin made from diaminopropylmethylamine and epichlorohydrin; b) epichlorhydric polyamide resin made from epichlorohydrin, adipic acid, caprolactam, diethylene triamine and/or ethylene diamine; c) epichlorhydric polyamide resin made from adipic acid, diethylene triamine and epichlorohydrin or a melt of epichlorhydrin and ammoniac; d) epichlorhydric polyamide-polyamide resin made from epichlorohydrin, dimethyladipate and diethylene triamine; e) epichlorhydric polyamide-polyamide resin made from epichlorohydrin, adipamide and diaminopropylmethylamine AdditivePlastics(49)31 December 2031 1489sebacic acid, reaction product with stearylamide, neutralised with calcium hydroxide Polymer production aid Additive Lubricants31 December 20311490silanols, with at least one hydroxyl group and one or more methyl, vinyl or phenyl groups on every silicon atomMonomer or other reactantRubber0,131 December 2031149168988-56-7silicium dioxide, reaction product with trimethylchlorosilane and isopropyl alcoholPolymer production aidLubricants31 December 2031

14929006-65-9silicone oils (organopolysiloxanes with methyl and/or phenyl groups) Monomer or other reactant (base oil) Additive (polymeric) Rubber, coatings, lubricants31 December 20311493sorbitol esters with linear fatty acids, saturated or not, with an even number of carbon C8-C20AdditiveCoatings0,131 December 20311494stearic acid mono or di esters with ethanediol and/or ether bis(2-hydroxyethyl) and/or triethyleneglycolAdditivePlastics31 December 20311495titanic acid, esters with isobutanol, n-butanol and the enolate of ethylacetoacetateAid to polymerisationSilicone31 December 2031149626780-96-12,2,4-trimethyl–1,2-dihydrochinolin (polymerised)AdditiveRubber31 December 20311497trivinyl cyclohexane and α,ω-dihydrogenpolyhydrogenmethyldimethyl-siloxanes, addition products of Monomer or other reactant Additive (polymeric) SiliconeMaximum dosage = 10 % (w/w).31 December 2031 1498urea-formaldehyde condensation products Monomer or other reactant (resin) Additive Polymer production aid Plastics, coatings(15)31 December 20311499vinyl esters of monohydric, saturated, aliphatic carboxylic acids, C2-C20Monomer or other reactantPlastics2,531 December 203115002098907-70-9siloxane and silicone, dimethyl, hydroxyterminated (MW > 7400 Da), ethers with C16-C18 fatty acids esters with pentaerythritol Polymer production aid Other (processing aid) RubberThe polymer may contain siloxane and silicone, dimethyl, hydroxy-terminated (MW > 7400 Da), fatty acids, and C16-C18-fatty acids ester of pentaerythritol.31 December 203115011318-02-1zeolites, natural and synthetic, sodium salts Additive Aid to polymerisation Plastics, rubber, coatingsFor aluminium, refer to Annex V.If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2031 1502hydrocarbons, C10-C14, aromatic content ≤1 %AdditivePlastics, coatingsOnly to be used if the production process temperature is above the boiling point.31 December 20311503921-728-364741-66-8hydrocarbons, C7-C9, isoalkanes, with EC No. 921-728-3, boiling point 90 to 150 °C, negligible solubility in waterAdditiveAllOnly to be used if the production process temperature is above the boiling point.31 December 20311504920-750-064742-49-0hydrocarbons, C7-C9, n-alkanes, isoalkanes, cyclics, with EC No. 920-750-0, boiling point 90 to 165 °C, log Po/w=2.2-5.2, insoluble in waterAdditiveAllOnly to be used if the production process temperature is above the boiling point.31 December 20311505titanium hydroxide (orthotitanic acid)AdditiveAll, except rubberIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2031 1506119345-04-9benzene, 1,1'-oxybis-,tetrapropylene derivatised, sulfonated sodium salts Additive Polymer production aid Coatings450For the MTCtap values of degradation products, refer to Table 4.31 December 2031150761789-44-4castor oil fatty acidsMonomer or other reactantCoatings31 December 2031150861790-37-2tallow oil fatty acidsMonomer or other reactant (base oil)Coatings, lubricants31 December 2031150967762-90-7silicon dioxide, reaction product with polydimethylsiloxane

Additive Polymer production aid Coatings, lubricantsFor synthetic amorphous silicon dioxide, silanated: primary particles of 1–100 nm which are aggregated to a size of 0,1–1 μm and may form agglomerates within the size distribution of 0,3 μm to the mm size.31 December 2031151068308-51-0cotton seed oil fatty acidsMonomer or other reactantCoatings31 December 2031151168424-45-3linseed oil fatty acidsMonomer or other reactantCoatings31 December 2031 151268611-44-9silicon dioxide, reaction product with dimethyldicholorosilane Polymer production aid Additive LubricantsFor synthetic amorphous silicon dioxide, silanated: primary particles of 1–100 nm which are aggregated to a size of 0,1–1 μm and may form agglomerates within the size distribution of 0,3 μm to the mm size.31 December 2031151368909-20-6silicon dioxide, reaction product with hexamethyldisilazane Polymer production aid Additive LubricantsFor synthetic amorphous silicon dioxide, silanated: primary particles of 1–100 nm which are aggregated to a size of 0,1–1 μm and may form agglomerates within the size distribution of 0,3 μm to the mm size.31 December 2031151484625-38-7sunflower oil fatty acidsMonomer or other reactantCoatings31 December 203115159003-35-4phenolformaldehyde resinsAid to polymerisationRubber(15)MW > 1000 Da.31 December 2031151691744-27-3glycerides, mono-, di- and tri castor oil Additive Polymer production aid Coatings31 December 2031 151792044-96-7olive oil fatty acidsMonomer or other reactantCoatings31 December 2031151893165-31-2rapeseed oil fatty acidsMonomer or other reactantCoatings31 December 20311519corn oil fatty acidsMonomer or other reactantCoatings31 December 20311520dicyclopentadiene-indene-styrene-alpha-methylstyrene-vinyltoluene-isobutylene-copolymer, hydrogenated Additive Polymer production aid Coatings25031 December 20311521fish oil fatty acidsMonomer or other reactantCoatings31 December 20311522hempseed oil fatty acidsMonomer or other reactantCoatings31 December 20311523palm oil fatty acidsMonomer or other reactantCoatings31 December 20311524palmkernel oil fatty acidsMonomer or other reactantCoatings31 December 20311525perilla oil fatty acidsMonomer or other reactantCoatings31 December 20311526poppy-seed oil fatty acidsMonomer or other reactantCoatings31 December 20311527pumpkin seed oil fatty acidsMonomer or other reactantCoatings31 December 2031 1528ricinoleic acid, dehydrogenatedMonomer or other reactantCoatings31 December 20311529safflower oil fatty acidsMonomer or other reactantCoatings31 December 20311530sesame oil fatty acidsMonomer or other reactantCoatings31 December 20311531walnut oil fatty acidsMonomer or other reactantCoatings31 December 203115321,4-butanediol, trimethylolpropane, 2,3-butylene glycol, hydroquinone dihydroxydiethylether and their condensation derivatives with propylene oxideMonomer or other reactantPlastics(29)31 December 203115331,5-naphthylenediisocyanate, or 4,4'-diphenylmethanediisocyanate, or toluylenediisocyanateMonomer or other reactantPlastics(16)

Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2031 1534acrylonitrile copolymers with divinylbenzene (except ion exchange resins)AdditivePlastics0,1 - expressed as acrylonitrile monomer31 December 20311535acrylic, fumaric, maleic and methacrylic estersAdditivePlastics(21)31 December 20311536beta amino crotonic acid esters with 1,4-butylene glycol and with C16-C18 fatty alcoholsAdditivePlasticsFor rigid PVC and its copolymers with predominantly plasticiser-free PVC content: maximum dosage = 3 % (w/w).31 December 20311537butylated, styrenated, butylstyrene cresols with an average molecular weight 312AdditivePlasticsMaximum dosage = 0,5 % (w/w).31 December 20311538calcium, lithium, manganese, aluminium, zinc, sodium, potassium, magnesium stearates, palmitates, ricinoleates, heptanoates, octoatesAdditivePlasticsFor aluminium, lithium, manganese and zinc, refer to Annex V.31 December 2031 1539castor oil and its dehydration, hydrogenation and/or condensation products with adipic, sebacic and phthalic acidsAdditivePlastics(27)31 December 20311540claysAdditiveRubber31 December 20311541 condensation products of formaldehyde with: phenol cresol xylenol resorcinol melamine Monomer or other reactantRubber MTCtap for formaldehyde: 0.15 MTCtap for phenols: 0.05 (15)31 December 20311542condensation products of polyoxyethylene-3 with fatty alcohols C10-C18AdditivePlasticsFor polyolefin films: maximum dosage = 1 % (w/w).31 December 20311543copolymers of alpha-methylstyrene with vinyltolueneMonomer or other reactantPlastics31 December 2031 1544copolymers of butadiene with styrene and divinylbenzeneMonomer or other reactantPlastics31 December 20311545copolymers of styrene and/or alpha-methylstyrene with acrylonitrileMonomer or other reactantPlastics0,1 - expressed as acrylonitrile monomer31 December 20311546copolymers of styrene and/or alpha-methylstyrene with butadieneMonomer or other reactantPlastics31 December 20311547copolymers of styrene and/or alpha-methylstyrene with butadiene and acrylonitrileMonomer or other reactantPlastics0,1 - expressed as acrylonitrile monomer31 December 20311548copolymers of styrene and/or alpha-methylstyrene with methylmethacrylateMonomer or other reactantPlastics31 December 20311549copolymers of styrene with divinylbenzene (except ion exchange resins)Monomer or other reactantPlastics31 December 20311550copolymers of tetrafluoroethylene with hexafluoropropyleneMonomer or other reactantPlastics(38)31 December 2028 1551copolymers of vinyl chloride with acrylonitrileMonomer or other reactantPlastics0,1 - expressed as vinyl chloride monomer and acrylonitrileVinyl chloride monomer: maximum residual content in the final material (QM) = 1 mg/kg.31 December 20311552copolymers of vinyl chloride with cetylvinyl etherMonomer or other reactantPlastics0,1 - expressed as vinyl chloride monomer and acrylonitrileVinyl chloride monomer: maximum residual content in the final material (QM) = 1 mg/kg.31 December 20311553copolymers of vinyl chloride with vinyl acetate modified with maleic anhydride and polyvinyl alcoholMonomer or other reactantPlastics0,1 - expressed as vinyl chloride monomer and acrylonitrileVinyl chloride monomer: maximum residual content in the final material (QM) = 1 mg/kg.31 December 20311554copolymers of vinyl chloride with vinylidene chlorideMonomer or other reactantPlastics0,1 - expressed as vinyl chloride monomer and acrylonitrileVinyl chloride monomer: maximum residual content in the final material (QM) = 1 mg/kg.31 December 2031

1555copolymers of vinylidene chloride with acrylonitrileMonomer or other reactantPlastics0,1 - expressed as vinyl chloride monomer and acrylonitrile31 December 20311556cresolsMonomer or other reactantRubberformaldehyde MTCtap = 150 μg/l.31 December 2031155785116-97-8diethylene glycol ester with stearic acidAdditivePlastics31 December 20311558diphenylcarbonate with phosgeneMonomer or other reactantPlastics31 December 20311559emulsion siliconesAdditiveRubberComposition according to silicones.31 December 20311560epoxy resinsOther (used in the casting process to produce cast film or moulding)Plastics31 December 20311561ester products between rosin, maleic and citric acid with C3-C6 polyalkaloidsMonomer or other reactantRubber31 December 2031 1562ester-like condensation products between rosin, maleic acid and citric acid with polyalcohols containing three to six C atoms in the moleculeMonomer or other reactantPlastics31 December 20311563esters of fatty acids with polyglycerolAdditivePlasticsFor PVC and polyolefin stretch films.31 December 20311564esters of glycerol with behenic and arachidic acidsAdditivePlastics31 December 20311565esters of saturated aliphatic acids C6-C22 with saturated aliphatic monohydroxyl alcohols C2-C20, including oleic alcoholAdditivePlasticsMaximum residual content in the final material (QM) = 15000 mg/kg.31 December 20311566ethylene copolymers with buteneMonomer or other reactantPlastics31 December 20311567ethylene copolymers with propyleneMonomer or other reactantPlastics31 December 20311568ethylenediamine with fatty acidMonomer or other reactantPlastics31 December 2031 1569glycerol, esters with caprylic and n-decanoic acidsAdditivePlastics31 December 20311570glycerophthalic resins modified with oil and styrene and/or alpha-methylstyreneMonomer or other reactantPlastics(27)31 December 20311571hexamethylenediamine with adipic and/or sebacic acidMonomer or other reactantPlastics31 December 20311572hydrogenated homopolymers and/or copolymers of 1-decene and/or 1-dodecene and/or 1-octeneAdditivePlastics31 December 20311573iso-octyl-epoxy-stearateAdditivePlastics31 December 20311574linseed oils epoxidised using good industrial practiceAdditivePlasticsFor PVC and PVDC (epoxidised linseed oil iodine number < 6; oxirane oxygen content < 10 %).31 December 20311575maleic resins modified with rosin and abietic acidMonomer or other reactantPlastics, rubber31 December 2031 1576mercaptobenzimidazole and zinc saltsMonomer or other reactantRubberFor zinc, refer to Annex V.Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2031157763231-60-7microcrystalline waxesAdditiveRubber The sample under examination is considered suitable for use if it does not exceed the following absorption limits per centimetre optical pathlength: between 280 and 289 mμ: 0.15; between 290 and 299 mμ: 0.12: between 300 and 359 mμ: 0.08; between 360 and 400 mμ: 0.02.

31 December 2031 1578mixture of dimethyltin-s,s'-bis (isooctylmecraptoacetate) and mono methyltin-s,s'-tris (isooctylmecraptoacetate)AdditivePlastics(9)For use in PVC and rigid PVC copolymers free of plasticisers.31 December 20311579 200-338-0 246-770-3 57-55-6 25265-71-8 mono- and dipropylene glycolsMonomer or other reactantPlastics31 December 20311580 277-291-8

73138-45-1

montanic acid ester with ethanediol and 1,3 butanediolAdditivePlasticsProvided that the product does not release ethylene glycol.31 December 20311581octylalcoholsMonomer or other reactantPlastics, rubber31 December 20311582organopolysiloxanes with 1,2-propanediol groups Monomer or other reactant Additive or polymer production aid Rubber31 December 20311583organopolysiloxanes with 1,3-propanediol groupsMonomer or other reactantRubber31 December 2031 1584organopolysiloxanes with 2,4-toluidene diisocyanate groupsMonomer or other reactantRubber5,0 - expressed as primary aromatic amines(16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 20311585organopolysiloxanes with 2,6-toluidene diisocyanate groupsMonomer or other reactantRubber5,0 - expressed as primary aromatic amines(16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 20311586organopolysiloxanes with ethylene oxide groupsMonomer or other reactantRubber31 December 20311587organopolysiloxanes with fluorinated groupsMonomer or other reactantRubber31 December 20311588organopolysiloxanes with methyl groupsMonomer or other reactantRubber31 December 2031 1589organopolysiloxanes with pentaerythritol groups Monomer or other reactant Additive or polymer production aid Rubber31 December 20311590organopolysiloxanes with phenyl groupsMonomer or other reactantRubber31 December 20311591organopolysiloxanes with propylene oxide groupsMonomer or other reactantRubber31 December 20311592organopolysiloxanes with sorbitol groups Monomer or other reactant Additive or polymer production aid Rubber31 December 20311593organopolysiloxanes with tetrafluoroethylene groupsMonomer or other reactantRubber31 December 20311594organopolysiloxanes with triethylene glycol groupsMonomer or other reactantRubber31 December 20311595organopolysiloxanes with trimethylolpropane groupsMonomer or other reactantRubber31 December 2031 1596organopolysiloxanes with triphenylmethanediisocyanate groupsMonomer or other reactantRubber5,0 - expressed as primary aromatic amines(16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 20311597organopolysiloxanes with vinyl groupsMonomer or other reactantRubber31 December 20311598pentenesMonomer or other reactantRubber31 December 20311599phenolic resins alone or modified with glycerophthalic, epoxy or polyvinyl butyral resins or with butyl alcoholMonomer or other reactantPlasticsFor paints and varnishes.31 December 20311600phenols and/or methylphenols condensed with styrene and/or alpha-methyl-styreneAdditiveRubber31 December 20311601polyacetal resinsAdditiveRubber31 December 2031

1602polyamide resulting from the polymerisation of 1,3,5-benzene tricarbonyl chloride with 1,3-benzene diamineMonomer or other reactantPlastics For film thickness ≤ 4 μm in reverse osmosis/ultrafiltration plants. Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 20311603polyglycolsAdditiveRubber31 December 20311604polymers derived from the esterification of azelaic acid with n-hexyl and 2-ethylhexyl alcoholsAdditivePlastics31 December 20311605polymers of butyl, ethyl and methyl acrylates and methyl methacrylatesMonomer or other reactantPlasticsProduct must be washed with water at room temperature for 2 hours (except films and coatings < 0,2 mm thick).31 December 20311606saturated, unsaturated and hydroxylated fatty acids (C8-C24)AdditiveRubber31 December 2031 1607silica and hydrated silicasAdditiveRubberIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 20311608silicone oils Additive Other (processing aid) Plastics, rubber31 December 20311609sodium pentamethylenedithiocarbamateAid to polymerisationRubber(42)31 December 20311610sorbitol esters with erucic, lauric, linoleic, myristic, oleic, pelargonic, palmitic, ricinoleic, stearic, 12-hydroxystearic acidsAdditivePlastics31 December 20311611soya polymers Monomer or other reactant Additive Plastics31 December 20311612terpenic resins from dipentene, alfapinene, betapineneMonomer or other reactantRubber31 December 2031 1613terpolymers of ethylene, vinyl acetate and carbon monoxideAdditivePlasticsFor use in PVC.31 December 20311614urea resins modified with butyl alcoholMonomer or other reactantRubberFor use in paints and varnishes.31 December 20311615xylenolsMonomer or other reactantRubberformaldehyde MTCtap = 150 μg/l.31 December 20311616alkyl(C8-C18)sulfonic acids, sodium salts Additive Polymer production aid Rubber1500 - expressed as the sum of alkyl(C8-C18)sulfuric and alkyl(C8-C18)benzenesulfonic acids31 December 20311617alkyl(C8-C18)sulfuric acids, sodium salts Additive Polymer production aid Rubber1500 - expressed as the sum of alkyl(C8-C18)sulfuric and alkyl(C8-C18)benzenesulfonic acids31 December 2031 1618chlorobutadienesMonomer or other reactantRubber25031 December 2031161963393-89-5coumarone-indene resinsAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 20311620fatty acids, saturated and unsaturated, with an even number of C-atoms, C8-C22, unsaponifiables content not to exceed 2%, esters with pentaerythritolAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 20311621fatty acids, linear, saturated and unsaturated, with an even number of C-atoms, C8-C22, unsaponifiables content not to exceed 2%Aid to polymerisationRubber31 December 20311622fibres of pure celluloseAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 2031

1623Fibres of regenerated cellulose in accordance with Commission Directive 2007/42/ECAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 2031162482-74-2hydrocarbon waxes, paraffin and microcrystalline (hydrogenated)AdditiveRubber31 December 20311625organopolysiloxanes (silicones), with two methyl groups to each silicon atom, molecular weight 13,5-30Additive or polymer production aidRubber75031 December 203116268020-83-5paraffin mineral oilsAdditiveRubber31 December 20311627phthalic acid, esters with triethyleneglycolAdditiveRubber (2) (27) In rubbers, not for use in products in contact with warm and hot water.31 December 20311628polyethyleneglycol (4-14) ethers of monohydric, linear, saturated, primary alcohols, C12-C18 Additive Polymer production aid Rubber25031 December 2031 1629polyethyleneglycol (4-14) ethers of octyl- and/or nonylphenol Additive Polymer production aid Rubber25031 December 20311630polyethyleneglycol (8-14), esters with lauric, oleic, ricinoleic, and/or stearic acidAdditive or polymer production aidRubber31 December 2031163173398-64-8quaternary ammonium compounds, di-C8-C18-alkyldimethyl, chloridesAdditive or polymer production aidRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 20311632regenerated elastomersAdditiveRubberRegenerated elastomer to the extent that they are derived from rubber that complies with the European positive list for organic materials.31 December 20311633rosin derivativesAdditiveRubber31 December 20311634silanols with at least one hydroxyl group and one or more methyl groups to each silicon atomMonomer or other reactantRubber31 December 2031 1635siloxanes, with one hydrogen atom and one methyl group to each silicon atomMonomer or other reactantSilicone31 December 20311636siloxanes, with two methylgroups to each silicon atom and a vinyl group to the terminal silicon atomsMonomer or other reactantRubber31 December 20311637soot (furnace black and channel black) and other carbon products like graphite and coke powderAdditiveRubber31 December 20311638styrene (2 moles) condensed with 1 mole of a mixture of o-, m- and p-cresols, provided that the Brookfield viscosity of the end product is between 14 and 17 cP at 25 °CAdditiveRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 20281639styrene and/or alfa-methylstyrene and/or -alkene(C3-C12)phenol and/or methylphenol reaction productsAdditiveRubber25031 December 2028 1640thioxylenolsAdditive or polymer production aidRubberIn rubbers, not for use in products in contact with warm and hot water.31 December 20311641tris(mono- and dinonylphenyl) phosphiteAdditiveRubber In rubbers, not for use in products in contact with warm and hot water. Tris(2-hydroxypropyl)amine impurity content not to exceed 1 %. 31 December 20311642hemp fibresCoatingsIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 20281643linen fibresCoatingsIf used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368.31 December 2028

Notes:

1. Note 1: Explanation of the notes in Tables 1 and 2 The meaning of the notes provided in Tables 1 and 2 is as follows: A. Substance numbers under European food contact material (FCM) legislation are provided for information purposes only. B. This column indicates the technical function that the starting substance performs when used in the drinking water contact materials the starting substance is authorised for. C. This column indicates the categories of drinking water contact materials the starting substance is authorised for. D. Total Maximum Tolerable Concentration at the tap (MTC(T)tap, organics) means the maximum permitted concentration of specified substances migrating from organic materials into water intended for human consumption either as (a) total of moiety of the substances as provided under Table 3; or (b) total of the bound or unbound element or ion provided under Annex V. E. Relevant chemical species are those identified in accordance with Section 3, Annex IV to Commission Implementing Decision (EU) 2024/365.
2. Note 2: Scope of an authorisation i. Where a starting substance appearing on the list as an individual entry is also covered by a group entry, the conditions of use and specifications and expiry dates applying to this starting substance shall be those indicated in the individual entry exclusively. ii. Unless stated otherwise in Table 1, the following salts of authorised acids, phenols and alcohols shall be considered covered by that authorisation: aluminium, ammonium, barium, calcium, cobalt, copper, europium, gadolinium, iron, lanthanum, lithium, magnesium, manganese, potassium, sodium, terbium, and zinc. This is subject to compliance with the corresponding MTCtap, organics value for the element or ion shown in Annex V for organic materials. In certain cases, where the safety assessment indicates concerns on the use of the free acids, only the salts should be authorised by indicating in the list the name as … acid(s), salts. iii. Mixtures obtained by mixing authorised starting substances without a chemical reaction of the components shall be considered covered by that authorisation. iv. Where a starting substance appears on the list as its anhydrous form, its approval shall be considered to covers its hydrated form. v. In the case of any natural or synthetic polymeric substance of an authorised monomer or other reactant and that polymeric substance is not used as an additive, that polymeric substance shall be considered covered by the authorisation of that monomer or other reactant. After the first European positive list, only entries for the monomer and other reactant shall be included. vi. In the case of any natural or synthetic polymeric substance of an authorised monomer or other reactant and that polymeric substance has a molecular weight of at least 1000 Da, that polymeric substance shall be considered covered by the authorisation of that monomer or other reactant when used as additives. After the first European positive list, only entries for the monomer and other reactant shall be included.

As an exception, this provision shall not apply to polymers obtained from microbial fermentation. vii. Pre-polymers and natural or synthetic polymers, as well as their mixtures, used as monomer or other reactant incorporated in the polymer shall be considered covered by the authorisation of the monomers or other reactant required to synthesise them. After the first European positive list, only entries for the monomer or other reactant shall be included. As an exception, this provision shall not apply to polymers obtained from microbial fermentation, pre-polymers for organopolysiloxanes used in the manufacture of silicones, rubbers, lubricants and surface treatment for fillers, and pre-polymers for coatings. viii. After the first European positive list, only entries for a polymer shall be included in cases for which points v to vii are not applicable. ix. Organic cementitious constituents authorised on the European positive list of organic cementitious constituents of Annex III may be used in organic materials when used as constituents in cementitious fillers. x. Ceramic compositions authorised on the European positive list of composition for enamels, ceramic and other inorganic materials of Annex IV may be used as fillers in organic materials. xi. Fibres made of metallic compositions authorised on the European positive list of compositions for metallic materials of Annex II may be used in organic materials. xii. Fibres and microballs made of glass compositions authorised on the European positive list of composition for enamels, ceramics and other inorganic materials of Annex IV may be used in organic materials provided that each filament has a diameter above 1 μm and the average diameter of the filaments in the organic material is above 5 μm. xiii. Water may be used as a starting substance in the manufacture of organic materials that come into contact with water intended for human consumption. xiv. An entry in Table 1 covers a nanoform only when it is explicitly stated in the approval of that entry. 3. Note 3: Additional conditions of use i. Only biocidal active substances of Product-type 6 (Preservatives for products during storage) in accordance with Regulation (EU) No 528/2012 may be used as starting substances. ii. Entries in Table 1 and Table 2 which according to their conditions of use are used in organic materials as metallic fibres, shall adhere to the requirements of Annex II. Entries in Table 1 and Table 2 which according to their conditions of use are used in organic materials as ceramic fillers, shall adhere to the requirements of Annex IV. Entries in Table 1 and Table 2 which according to their conditions of use are used in organic materials as glass fibres and microballs, shall adhere to the requirements of Annex IV. Where indicated in Table 1, entries identified with an MTC(T)tap, organics shall comply with the following: Table 3 Total MTC(T)tap, organics values for groups of listed starting substances MTC(T)tap, organics reference in Table 1MTC(T)tap, organics in μg/lMTC(T)tap, organics specification(1)300expressed as acetaldehyde(2)1500expressed as ethyleneglycol(3)1500expressed as maleic acid(4)750expressed as caprolactam(5)150expressed as the sum of the substances(6)50expressed as iodine(7)60expressed as tertiary amine(8)300expressed as the sum of the substances(9)9,0expressed as tin (for methyltin methyltin mercaptoacetates)(10)0,3expressed as tin (for di-n-octyltins)(11)60expressed as tin (for mono-n-octyltins)(12)1500expressed as the sum of the substances(13)75expressed as the sum of the substances(14)250expressed as the sum of the substances and their oxidation products(15)750expressed as formaldehyde(16)0,1expressed as isocyanate moiety(17)2,5expressed as the sum of the substances(18)500expressed as SO2(19)1500expressed as the sum of the substances(20)250expressed as trimellitic acid(21)300expressed as acrylic acid(22)300expressed as methacrylic acid(23)250expressed as the sum of the substances

(24)2,5expressed as the sum of mono-n-dodecyltin tris(isooctylmercaptoacetate), di-n-dodecyltin bis(isooctyl mercaptoacetate), mono-dodecyltin trichloride and di-dodecyltin dichloride) expressed as the sum of mono- and di-dodecyltin chloride(25)90expressed as the sum of the substances(26)250expressed as isophthalic acid(27)375expressed as terephthalic acid(28)2,5expressed as the sum of 6-hydroxyhexanoic acid and caprolactone(29)250expressed as 1,4-butanol(30)1500expressed as the sum of the substances(31)3000expressed as the sum of the substances plus Diisobutyl phthalate, with synonyms 1,2-bis(2-methylpropyl) benzene–1,2-dicarboxylate or DIBP and CAS number 84-69-5 which is not listed as an authorised substance in Table 1. However, it may co-occur with other phthalates as a consequence of its use as an aid to polymerisation and is included in group restrictions(32)0,1expressed as eugenol(33)2,5expressed as 1,3-benzenedimethanamine (hydrolysis product)(34)2,5expressed as crotonic acid(35)30expressed as the sum of phthalic acid, dibutyl ester (DBP), diisobutyl phthalate (DIBP), phthalic acid, benzyl butyl ester (BBP) and phthalic acid, bis(2-ethylhexyl) ester (DEHP) expressed as DEHP equivalents using the following equation: 5×DBP + 4×DIBP + 0.1×BBP + 1×DEHP(36)2,5expressed as the sum of triethanolamine and the hydrochloride adduct expressed as triethanolamine(37)0,1expressed as perchlorate(38)0,05expressed as PFAS Total(39)0,01expressed as Sum of PFAS(40)150expressed as the sum of (di)ethyleneglycol, monoalkyl (C1,C2,C4,C6) ethers and acetic acid, 2-ethoxyethyl ester(41)1500expressed as the sum of sodium salts of alkyl(C8-C18)benzene sulfonates, alkyl(C8-C18)naphthalene sulfonates, alkyl(C8-C18)sulfates and alkyl(C8-C18)sulfonates(42)50expressed as the sum of thiurams and dithiocarbamates (43)100expressed as the sum of benzothiazole-2-thiol (CAS Number 149-30-4, EUPL Number 0910), di(benzothiazole-2-yl) disulphide (CAS Number 120-78-5, EUPL Number 0890), 2-(morpholinothio)benzothiazole (CAS Number 102-77-2), N-tert-butylbenzothiazole-2-sulphenamide (CAS Number 95-31-8, EUPL Number 0854), N-cyclohexylbenzothiazole-2-sulfenamide (CAS Number 95-33-0, EUPL Number 0847), 2-(2,6-dimethylmorpholinothio) benzthiazole (CAS Number 102-78-3) and 2-benzothiazyl-N,N-diethylthiocarbamyl sulphide (CAS Number 95-30-7)(44)0,1expressed as the sum of ethylvinylbenzene and divinylbenzene(45)0,6expressed as the sum of 1,4- and 1,5-hexadiene(46)2,5expressed as neodecanoic acid(47)50expressed as the sum of xanthogenates(48) 10 2,5 expressed as the sum of TMBPF, TMBPF-DGE, TMBPF-DGE·H2O and TMBPF-DGE·2H2O expressed as the sum of TMBPF-DGE·HCl, TMBPF-DGE·2HCl and TMBPF-DGE·HCl·H2O 496expressed as 3-monochlor–1,2-propane-diol Where entries in Table 1 which contain alkylphenol structural moieties are used as stabilisers they may be accompanied by the non-intentionally added substances shown in Table 4 and the MTCtap, organics values shown in the table shall apply to those substances.

Table 4 MTCtap, organics for degradation products of stabilisers with alkylphenol structural moieties that are listed in the European positive list for organic materials EC NumberCAS NumberSubstance nameMaximum Tolerable Concentration at the tap (MTCtap, organics) in μg/l204-598-6123-07-94-ethylphenol0,1202-679-098-54-44-tert-butylphenol2,5211-946-0719-22-22,6-di-tert-butyl-1,4-benzoquinone2,5202-532-096-76-42,4-di-tert-butyl phenol250-19263-36-63,5-di-tert-butyl-4-hydroxy styrene0,1216-592-01620-98-03,5-di-tert-butyl-4-hydroxy benzaldehyde2,5622-532-814035-33-73',5'-bis(tert-butyl)-4'-hydroxyacetophenone2,5 872-478-682304-66-37,9-di-tert-butyl-1-oxaspiro[4.5]deca–6,9-diene–2,8-dione100 228-985-4 243-556-1 6386-38-5 20170-32-5 methyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionic acid 50 as sum

Annex

ANNEX II EUROPEAN POSITIVE LIST OF COMPOSITIONS OF METALLIC MATERIALS AND GROUPS OF COMPOSITIONS FOR METALLIC MATERIALS Table 1 European positive list of individual metallic compositions for metallic materials EUPL NumberMetallic composition category (A)Accepted metallic composition notation(s)Accepted metallic composition constituentsAccepted metallic composition impuritiesRelevant product groupsConditions of useExpiry dateIdentityMinimum concentration (% w/w)Maximum concentration (% w/w)IdentityMaximum concentration (% w/w)1644Copper-Zinc alloysCW501L-DW (CuZn10) Cu Zn 89,0 Remainder 91,0 Fe Ni Pb Sn Each other impurity 0,05 0,2 0,05 0,1 < 0,02 C - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. 31 December 20341645Copper-Zinc alloysCW506L-DW (CuZn33) Cu Zn 66,0 Remainder 68,0 Fe Ni Pb Sn Each other impurity 0,05 0,2 0,05 0,1 < 0,02 B - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. 31 December 20341646Copper-Zinc alloysCW507L-DW (CuZn36) Cu Zn 63,5 Remainder 65,5 Fe Ni Pb Sn Each other impurity 0,05 0,2 0,1 0,1 < 0,02 B - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. 31 December 20341647Copper-Zinc alloysCW508L-DW (CuZn37) Cu Zn 62,0 Remainder 64,0 Al Fe Ni Pb Sn Each other impurity 0,05 0,1 0,2 0,1 0,1 < 0,02 B - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. 31 December 2034 1648Copper-Zinc alloysCW509L-DW (CuZn40) Cu Zn 59,5 Remainder 61,5 Al Fe Ni Pb Sn Each other impurity 0,05 0,2 0,2 0,2 0,2 < 0,02 B - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %; Pb: ≤ 0,2 %. 31 December 20341649Copper-Zinc alloysCW510L-DW (CuZn42) Cu Zn 57,0 Remainder 59,0 Al Fe Ni Pb Sn Each other impurity 0,05 0,3 0,2 0,2 0,3 < 0,02 B - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. 31 December 20341650Copper-Zinc-Aluminium alloysCuZn42Al (CC773S)Cu57,059,0Fe0,3B - D31 December 2034ZnRemainderPb0,2Al0,10,3

Sn Each other impurity 0,3 < 0,02 1651Copper-Zinc-Aluminium-Tin alloysCuZn35Al1.5SnCu64,066,0Fe0,10B - D31 December 2034ZnRemainderMn0,10 Al Sn 1,40 0,50 1,60 0,70 Ni Pb Si Each other impurity 0,10 0,2 0,2 < 0,02 1652Copper-Zinc-Aluminium-Silicon-Iron alloysCuZn35AlSiFeCu62,564,5Ni0,09B - D31 December 2034ZnRemainderPb0,15 Al Si Fe 0,5 0,5 0,04 0,85 0,8 0,1 Sn Each other impurity 0,1 < 0,02 1653Copper-Zinc-Arsenic alloysCW707R (CuZn30As)Cu69,071,0Fe0,05B - D31 December 2034ZnRemainderMn0,1As0,020,06 Pb Sn Each other impurity 0,07 0,05 < 0,02 1654Copper-Zinc-Arsenic-Aluminium alloysCuZn35Al-CCu63,064,5Fe0,3B - D31 December 2034ZnRemainderMn0,1 As Al 0,04 0,2 0,14 0,7 Pb Sn Each other impurity 0,2 0,3 < 0,02 1655Copper-Zinc-Arsenic-Aluminium alloysCW702R (CuZn20Al2As)Cu76,079,0Pb0,05A - B31 December 2034ZnRemainderNi0,1 Al As 1,8 0,02 2,3 0,06 Sb Each other impurity 0,02 < 0,02 1656Copper-Zinc-Arsenic-Antimony-Aluminium alloysCC771S (CuZn36AlAsSb-C)Cu62,065,0Fe0,2B - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. 31 December 2034ZnRemainderMn0,1 As Sb Αl 0,02 0,02 0,45 0,04 0,05 0,7 Ni Pb Sn Each other impurity 0,20 0,2 0,3 < 0,02 1657Copper-Tin-Zinc-Phosphorus-Sulfur alloysCuSn4Zn2PS Cu Sn Zn P S 90,0 3,0 1,0 0,01 0,2 96,0 5,0 3,0 0,1 0,6 Fe Ni Pb Sb Each other impurity 0,3 0,3 0,2 0,1 < 0,02 B - D31 December 20341658Copper-Zinc-Silicon-Phosphorus alloysCW724R (CuZn21Si3P)Cu75,077,0Al0,05B - D31 December 2034ZnRemainderFe0,3 Si P 2,7 0,02 3,5 0,10 Mn Ni Pb Sn Each other impurity 0,05 0,2 0,1 0,3 < 0,02 1659Copper-Zinc-Silicon-Phosphorus alloysCC768S (CuZn21Si3P-C)Cu75,077,0Al0,05B - DB and Zr are used for grain refinement of this alloy. In the final material the content of these two elements shall be < 0,02 %.31 December 2034ZnRemainderFe0,3 Si P 2,7 0,02 3,5 0,10 Mn Ni Pb Sn Each other impurity 0,05 0,2 0,1 0,3 < 0,02 1660Copper-Silicon-Zinc-Manganese-Phosphorus alloysCC245E (CuSi4Zn4MnP-C)CuRemainderAl0,3B - D31 December 2034 Si Zn Mn P 2,5 1,0 0,03 0,05 4,5 7,0 0,09 0,15 Fe Ni Pb Sn Each other impurity 0,3 0,10 0,10 0,3 < 0,02 1661Copper-Silicon-Zinc-Manganese-Phosphorus alloysCC246E (CuSi4Zn9MnP-C)CuRemainderAl0,3B - D31 December 2034 Si Zn Mn P 2,5 7,0 0,03 0,05 4,5 11,0 0,09 0,15 Fe Ni Pb Sn Each other impurity 0,3 0,10 0,10 0,3 < 0,02 1662Copper-Silicon-Zinc-Manganese-Phosphorus alloysCuSi4Zn4MnPCuRemainderAl0,3B - D31 December 2034 Si Zn Mn P 2,5 1,0 0,01 0,05 4,5 7,0 0,09 0,15 Fe Ni Pb Sn Each other impurity 0,3 0,10 0,10 0,3 < 0,02 1663Copper-Silicon-Zinc-Manganese-Phosphorus alloysCuSi4Zn9MnPCuRemainderAl0,3B - D31 December 2034 Si Zn Mn P 2,5 7,0 0,01 0,05 4,5 11,0 0,09 0,15 Fe Ni Pb Sn Each other impurity 0,3 0,10 0,10 0,3 < 0,02 1664Copper-Tin-Phosphorus alloysCW453K (CuSn8)CuRemainderFe0,1C - D31 December 2034 Sn P 7,5 0,02 8,5 0,4 Ni Zn Each other impurity 0,2 0,2 < 0,02 1665Copper-Tin-Lead-Phosphorus alloysCuSn10-C Cu Sn Pb P 88,0 9,0 0,2 0,01 90,0 11,0 1,0 0,2 Fe Mn Ni

S Sb Zn Each other impurity 0,2 0,10 0,2 0,05 0,1 0,5 < 0,02 B - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %; Sb: ≤ 0,1 %; Pb: 0.2 % - 1.0 %; P: 0.01 % - 0.2 %. 31 December 20341666Copper-Nickel-Manganese-Iron alloysCW352 (CuNi10FeMn)CuRemainderEach impurity< 0,02B - DFor use exclusively for fittings and ancillaries for heat exchangers and desalination equipment.31 December 2031 Ni Mn Fe 9,0 0,5 1,0 11,0 1,0 2,0 1667Copper-Nickel-Manganese-Iron alloys CW352H (CuNi10Fe1Mn) CW353H (CuNi30Fe2Mn2) CW354H (CuNi30Mn1Fe) CuRemainderEach impurity< 0,02BFor use exclusively for fittings and ancillaries in desalination plants.31 December 2031 Ni Fe Mn 9,0 1,0 0,5 32,0 2,5 2,5 1668CoppersCW024A (Cu-DHP)Cu99,9Each impurity< 0,02A - DCopper pipes cannot be used with all drinking waters distributed within the EU. Some water compositions (e.g., test water 1 according to EN 15664-1) cause a very high copper release. Member States may restrict the use of copper pipes with certain drinking waters.31 December 2034P0,0150,0401669CoppersCW004A (Cu-ETP)Cu99,90Each impurity< 0,02C - D31 December 2034O0,0401670CoppersCW008A (Cu-OF)Cu99,95Each impurity< 0,02B - D31 December 20341671CoppersCW020A (Cu-PHC)Cu99,95Each impurity< 0,02B - D31 December 2034P0,0010,0061672CoppersCW021A (Cu-HCP)Cu99,95Each impurity< 0,02B - D31 December 2034P0,0020,0071673CoppersCW023A (Cu-DLP)Cu99,90Each impurity< 0,02B - D31 December 2034P0,0050,0131674Tinned copper pipes and tinned copper fittingsCW024A (Cu-DHP) with a tin layer of 1 μm thicknessSn90Impurities of the tin layerA - D31 December 2034Cu10 As Bi Cd Cr Ni Pb Sb Each other impurity 0,01 0,01 0,01 0,01 0,01 0,01 0,01 < 0,02 1675AluminiumAluminiumAl99,0 Fe+Si Cu Others (e.g., Cr, Mg, Mn, Ni, Zn) Each other impurity 1,0 0,10 if Cr and/or Mn ≥ 0,05 %; 0,20 if Cr and/or Mn < 0,05 % 0,1 each < 0,02 B - C For use in access ladders and other minor components, and not for long-term contact, as follows: a) short contact: up to 24 hours at any temperature condition; b) prolonged contact: more than 24 hours at a refrigerated temperature (8 - 12 °C). 31 December 20311676Steel/IronGalvanised steelZn coatingImpurities of the zinc coatingA - D Acceptance is based on results that have been obtained with galvanised steel pipes with lead concentrations between 1,0 % and 0,6 % in the zinc layer, assuming a similar behaviour of pipes with lower lead concentrations. Galvanised steel pipes cannot be used with all drinking waters distributed within the EU. Member States may restrict the use of galvanised steel pipes with certain drinking waters which may cause unacceptable levels of corrosion. 31 December 2034 As Bi Cd Cr Pb Sb Each other impurity 0,02 0,01 0,01 0,02 0,05 0,01 < 0,02 1677Steel/IronCarbon steel according to EN 10025 / EN 10213 / EN 10222FeAl0,05 Carbon steel with protective layer/coating: A - D. Unprotected carbon steel: C2 - D Carbon Steel for pipes and tanks: carbon steel without permanent protective layers (e.g., cementitious mortar linings or organic coatings (e.g. epoxy resins)) is not suitable for use in contact with drinking water.

Carbon Steel for ancillaries: unprotected carbon steel can be used for specific applications (e.g. pumps, valves) and only for small surface in contact with drinking water. 31 December 2034 C Cr Mo Mn Ni 0,02 0,02 0,02 0,02 0,02 0,25 0,30 0,12 1,65 0,50 Cu Nb P S Si Ti V Each other impurity 0,55 0,05 0,03 0,03 0,6 0,05 0,12 < 0,02 1678Steel/IronCast iron according to EN 1561 / EN 1563FeAs0,05C2 Cast iron for pipes and tanks: cast iron without permanent protective layers is not suitable for pipes and fittings in contact with drinking water. Cast iron for ancillaries: unprotected cast iron can be used for specific applications (e.g. pumps, valves) and only for very small surface in contact with drinking water. 31 December 2034 C Cu Cr Mo Mn Ni Si 0,02 0,02 0,02 0,02 0,02 0,02 1.5 4,0 1,0 1,0 1,0 1,0 1,0 3,5 Mg P S Sn V Each other impurity 0,1 0,15 0,1 0,1 0,1 < 0,02 1679Steel/IronStainless steels according to EN 10088 and EN 10283A - D31 December 20341680PlatingsElectroplating of the outer surface (tin plating applied by a galvanic process) Cu Sn B- D (by reference to Cu alloys listed elsewhere in the metallic materials EUPL) Restrictions: (a) Bulk material of components to be tinned: copper alloys approved in the metallic materials EUPL; (b) Layer composition: (i) Cu (ii) Sn; (c) Applied process: galvanic tin plating; (d) Purity of the used anodes: ≥ 99,90 %. 31 December 20311681PlatingsTin/Nickel platings applied by a galvanic process on the external surface Sn Ni 65 33 67 35 B- D (by reference to Cu alloys listed elsewhere in the metallic materials EUPL) Restrictions: (a) Bulk composition of components to be plated: copper alloys approved in the metallic materials EUPL; (b) composition of the plating: Sn (66 ± 1 %) and Ni (34 ± 1 %) (molar ratio 1:1); (c) applied process: galvanic plating; (d) purity of the used nickel-anodes: 99,90 %. 31 December 2031 1682PlatingsElectrolytic Nickel/Chromium platings NI Cr B31 December 20311683Passive compositionsNiCr7030Ni60,0Al0,30B - D31 December 2034 Cr Si 29,0 0,50 32,0 2,0 C Co Cu Fe Mn P S Each other impurity 0,10 1,5 0,50 5,0 1,00 0,020 0,015 < 0,02 1684Passive compositionsNi55Ti45 Ni Ti 54,0 Remainder 56,0Each impurity< 0,02C - D31 December 20341685Passive compositionsTi1 according to ISO 23515:2022TiRemainder C O N H Fe Each other impurity Other impurities in total 0,08 0,18 0,03 0,015 0,20 < 0,1 < 0,4 B - D31 December 20341686Passive compositionsTi2 according to ISO 23515:2022TiRemainder C O N H Fe Each other impurity Other impurities in total 0,08 0,25 0,03 0,015 0,30 < 0,1 < 0,4 B - D31 December 2034 1687Passive compositionsTi3 according to ISO 23515:2022TiRemainder C O N H Fe Each other impurity Other impurities in total 0,08 0,35 0,05 0,015 0,30 < 0,1 < 0,4 B - D31 December 20341688Passive compositionsTi4 according to ISO 23515:2022TiRemainder C O N H Fe Each other impurity Other impurities in total 0,08 0,40 0,05 0,015 0,50 < 0,1 < 0,4 B - D31 December 20341689Passive compositionsTi-6Al-4V according to ISO 23515:2022TiRemainderC0,08B - D31 December 2034

Al V 5,5 3,5 6,75 4,5 O N H Fe Each other impurity Other impurities in total 0,20 0,05 0,015 0,4 < 0,1 < 0,4 1690Passive compositionsTi3.5Al3.0V0.4Mo0.9Ni0.25Pd0.14Ru0.2FeTiRemainderTotal impurities< 0,08B - D31 December 2031 Al V Mo Ni Pd Ru Fe 3,5 3 0,4 0,9 0,25 0,14 0,2 Table 2 European positive list of groups of metallic compositions for metallic materials EUPL NumberMetallic composition category (A)Accepted metallic composition notation(s)Accepted metallic composition constituentsAccepted metallic composition impuritiesRelevant product groupsConditions of useExpiry dateIdentityMinimum concentration (% w/w)Maximum concentration (% w/w)IdentityMaximum concentration (% w/w)1691Copper alloys not elsewhere categorisedOther copper alloys for Product Group D Cu Zn Si P Al Fe Mn Pb Ni As Sb No restriction No restriction No restriction No restriction 3,0 3,0 3,0 1,8 3,0 0,25 0,25 Each other element0,1D31 December 2031 1692Passive compositionsOther passive metallic materials for Product Group DD31 December 20311693Hard brazing alloys and soft soldering alloysHard brazing and soft soldering alloys meeting the maximum concentrations of the specified impurities Pb Sb Cd 0,1 0,1 0,01 B - C taking on account the extension of the final surface that might be exposed to drinking water For capillary brazing/soldering of pipes and fittings. The application of these alloys is critical to how they will behave during use and certain combinations of brazing/soft soldering alloy and parent metals may result in significant release of certain metals into the drinking water. 31 December 2031 Notes:

1. Note 1: Explanation of the notes in Tables 1 and 2 The meaning of the note provided in Tables 1 and 2 is as follows: A. Metallic composition category means a group of metallic compositions with the same metallic composition constituents, the same behaviour in contact with water intended for human consumption and the same restrictions with regard to water composition and/or surface area. A category has a reference material(s) with a controlled composition for which the metal releases are known and reproducible and represents the reasonable worst-case metal releases for the category. They are identified in the ECHA guidance.
2. Note 2: MTCtap, metallics The MTCtap, metallics, used to assess the safety of the use of the compositions listed under Tables 1 and 2 are provided for information purposes under Annex V.

Annex

ANNEX III EUROPEAN POSITIVE LIST OF ORGANIC CONSTITUENTS OF CEMENTITIOUS MATERIALS Table 1 sets out (1) the different categories of generic constituents of cementitious materials that may be used in the preparation of cementitious mixtures and (2) establishes conditions of use for each category. Table 1 List of generic constituents of cementitious materials Generic constituent categoryTypes of specific organic cementitious constituents within the scope of the European positive listsEuropean positive list requirementsCondition of useCementOrganic grinding aids or other organic substances used for the preparation of cementEuropean positive list for cementitious materialsInorganic additionsOrganic grinding aids or other organic substances used for the preparation of inorganic additionsEuropean positive list for cementitious materialsAggregatesNot relevantNot relevantMixing waterNot relevantNot relevantOrganic additionsOrganic substances

European positive list for organic materials European positive list for cementitious materials Starting substances that are authorised in the European positive list for organic materials which are authorised for use in the manufacture of coatings may be used to manufacture organic additions for use in cementitious materialsAdmixturesOrganic substancesEuropean positive list for cementitious materialsFibresOrganic substancesEuropean positive list for organic materialsStarting substances that are authorised in the European positive list for organic materials may be used to manufacture polymer fibres for use in cementitious materialsFormwork release agentsOrganic substancesEuropean positive list for cementitious materialsCuring compoundsOrganic substancesEuropean positive list for cementitious materials Table 2 Positive list of individual organic constituents for cementitious materials EUPL NumberEC NumberCAS NumberOrganic cementitious constituent nameGeneric constituent categoryTechnical functionMaximum Tolerable Concentration at the tap (MTCtap, cementitious) in μg/lTotal Maximum Tolerable Concentration at the tap (MTC(T)tap, cementitious) in μg/l (A)Conditions of useExpiry dateValue for the organic cementitious constituentValues for other relevant chemical species (B)1694514-10-3abietic acidAdmixtures31 December 2028169564-19-7acetic acidAdmixtures31 December 20341696108-24-7acetic anhydrideAdmixtures31 December 203416976419-19-8aminotris(methylphosphonic acid) (ATMP)Admixtures0,1 - expressed as amines31 December 203116981002-89-7ammonium stearateAdmixturesFor ammonium, refer to Annex V.31 December 20281699577-11-7anionic, docusate sodiumAdmixtures31 December 2031170085536-14-7benzenesulfonic acid 4-C10-C13-sec-alk derivsAdmixtures31 December 203117012634-33-51,2-benzoisothiazol-3(2H)-one (BIT)Admixtures, organic additions, formwork release agentsBiocide25Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368.31 December 2034 170214548-60-8benzylalcoholhemiformalAdmixtures31 December 20281703120-32-12-benzyl-4-chloro phenol (Chlorophen)Admixtures, organic additions, formwork release agentsBiocideOnly to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368.31 December 2028170490-43-7biphenyl-2-ol (2-phenylphenol)Admixtures, organic additions, formwork release agentsBiocideOnly to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368.31 December 2031170552-51-72-brom-2-nitropropan–1,3-diol (Bronopol)Admixtures, organic additions, formwork release agentsBiocideOnly to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368.31 December 20311706123-95-5butyl stearateAdmixtures31 December 20281707544-17-2calcium formateAdmixtures31 December 203117088061-52-7calcium lignosulfonateAdmixtures1231 December 2028

17091592-23-0calcium stearateAdmixtures31 December 2031171052627-73-3capric acid (decanoic acid)Admixtures31 December 20281711124-07-2caprylic acid (octanoic acid)Admixtures31 December 203417129000-11-7carboxy methyl celluloseAdmixtures31 December 202817139004-32-4carboxy methyl cellulose, sodium saltAdmixtures31 December 202817149004-34-6celluloseAdmixtures31 December 2028171559-50-7chlorocresolAdmixtures, organic additions, formwork release agentsBiocideOnly to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368.31 December 20311716911-418-655965-55-9Reaction mass of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H-isothiazol-3-one (CIT/MIT)Admixtures, organic additions, formwork release agentsBiocide25 Mixture 5-chloro-2-methyl-2H-isothiazol-3-one (75%) and 2-methyl-4-isothiazolin-3-one (25%). Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 171777-92-9citric acid (anhydrous)Admixtures31 December 203417185949-29-1citric acid, monohydrateAdmixtures31 December 2028171961791-31-9coconut diethanolamide (cocamide DEA)Admixtures31 December 2028172010016-20-3cyclohexapentylose (α-dextrin)Admixtures31 December 203417217585-39-9β-dextrinAdmixtures31 December 2034172214431-43-7dextrin / maltodextrinAdmixtures31 December 2028172350-70-4D-glucitol (sorbitol)Admixtures31 December 2028172410222-01-22,2-dibromo-3-nitrilopropionamide (DBNPA)Admixtures, organic additions, formwork release agentsBiocideOnly to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368.31 December 2028172517603-42-82,3-dihydroxypropyl (dihydrogen phosphate), sodium saltAdmixtures31 December 2028172639354-45-5disodium dodecylethoxylate sulfosuccinateAdmixtures31 December 2028 17271643-20-5dodecyldimethylamine oxideAdmixtures31 December 2031172861791-26-2ethoxylated tallow amineAdmixtures0,1 - expressed as amines31 December 202817299004-57-3cellulose, ethyl etherAdmixtures31 December 202817303586-55-8(ethylenedioxy)-dimethanolAdmixtures, organic additions, formwork release agentsBiocideOnly to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368.31 December 2031173161790-12-3fatty acids, tall oilsAdmixtures31 December 2028173250-00-0formaldehydeAdmixtures, organic additions, formwork release agentsBiocide750Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368.31 December 2028173364-18-6formic acidAdmixtures31 December 2034

17344719-04-4hexahydro-1 3,5-tris(hydroxyethyl)-s-triazine (N-formal)Admixtures, organic additions, formwork release agentsBiocideOnly to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368.31 December 203117359004-62-0cellulose, 2-​hydroxyethyl etherAdmixtures31 December 202817369032-42-2cellulose, 2-​hydroxyethyl methyl etherAdmixtures31 December 2028173737353-59-6hydroxy methyl celluloseAdmixtures31 December 2028173822987-21-9hydroxyethyldiphosphonic acidAdmixtures31 December 202817398061-54-9magnesium lignosulfonateAdmixtures1231 December 2028174068891-01-0melamine formaldehyde, toluenesulfonamide polymerAdmixtures31 December 2034174137206-01-2methyl carboxy methyl celluloseAdmixtures31 December 202817429004-67-5methyl celluloseAdmixtures31 December 202817439004-59-5methyl ethyl celluloseAdmixtures31 December 2028 17449004-65-3cellulose, 2-hydroxypropyl methyl ether (HPMC)Admixtures31 December 202817452682-20-42-methyl-4-isothiazolin-3-one (MIT)Admixtures, organic additions, formwork release agentsBiocide25 Only to be used in aqueous polymer dispersions and emulsions. Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2034174637293-74-6naphthalenesulfonic acid, polymer with formaldehyde, calcium saltAdmixtures31 December 2034174736290-04-72-naphthalenesulfonic acid, polymer with formaldehyde, sodium saltAdmixtures31 December 2028174826530-20-12-n-octyl-4-isothiazolin-3-one (OIT)Admixtures, organic additions, formwork release agentsBiocide25Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, I of Commission Implementing Decision (EU) 2024/368.31 December 20311749112-80-1oleic acidAdmixtures31 December 2028 1750132-27-4o-phenyl-phenate (OPP)Admixtures, organic additions, formwork release agentsBiocideOnly to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368.31 December 20311751111-30-81,5-pentandial (glutaraldehyde)Admixtures, organic additions, formwork release agentsBiocideOnly to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368.31 December 2031175237971-36-12-phosphono-butane 1,2,4-tricarboxylic acidAdmixtures31 December 2031175397105-14-1polycarboxylic acid salt type surfactantAdmixtures31 December 2037175468412-53-3polyethylene glycol branched nonylphenyl ether phosphateAdmixtures31 December 2037175537205-87-1polyethylene glycol nonylphenyl etherAdmixtures31 December 2028175672283-35-3polyoxyalkylene alkylether fatty acidAdmixtures150031 December 2034

175773667-50-2polysaccharide, succinoglycanAdmixturesExopolysaccharide, derived from fermentation of agrobacterium tumefaciens.31 December 2037175896949-22-3polysaccharide, Welan gumAdmixturesExopolysaccharide, derived from fermentation of alcaligenes.31 December 20341759143-18-0potassium oleateAdmixtures31 December 20281760 6381-59-5 304-59-6 potassium sodium tartrateAdmixtures31 December 203117613811-73-2pyridine-2-thiol 1-oxide, sodium saltAdmixtures, organic additions, formwork release agentsBiocideOnly to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368.31 December 20311762127-09-3sodium acetateAdmixtures31 December 2031176315733-22-9sodium p-chloro-m-cresolateAdmixtures, organic additions, formwork release agentsBiocideOnly to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368.31 December 2031176413150-00-0sodium 2-,2-,2-dodecyloxy ethoxy ethyl sulfateAdmixtures150031 December 2028 1765141-53-7sodium formateAdmixtures31 December 2031176631138-65-5sodium glucoheptonateAdmixtures31 December 20311767527-07-1sodium gluconateAdmixtures31 December 20371768137-16-6sodium N-lauroylsarcosinateAdmixtures31 December 20311769151-21-3sodium n-dodecyl sulfateAdmixtures31 December 203117708061-51-6sodium lignosulfonateAdmixtures1231 December 202817719084-06-4sodium naphthalene sulfonic acidAdmixtures31 December 2028177261790-51-0sodium resinateAdmixtures31 December 203117739005-25-8starch, edibleAdmixtures31 December 202817749049-76-7starch hydroxypropyl etherAdmixtures31 December 2028177557-11-4stearic acidAdmixtures31 December 2034177657-50-1sucroseAdmixtures31 December 2028177768131-32-8sulfite liquors (calcium lignosulfonate)Admixtures1231 December 2028 177885586-07-8sulfuric acid, mono-C12-C14-alkyl esters, sodium saltsAdmixtures150031 December 2031177964787-97-9sulfurous acid, monosodium salt, polymer with formaldehyde and 1,3,5-triazine-2,4,6-triamineAdmixtures31 December 203717808029-43-4syrups, hydrolysed starchAdmixtures31 December 2037178168131-37-3syrups, hydrolysed starch, dehydratedAdmixtures31 December 2028178268425-17-2syrups, hydrolysed starch, hydrogenatedAdmixtures Sorbitol (2-5 %), maltitol (9-14 %) and maltotritol (11-16 %). This mixture also contains 67-76 % hydrogenated oligosaccharides in compliance with the purity criteria for maltitol syrup E965(ii) as laid down in Commission Regulation (EU) No 231/2012. 31 December 2034178365997-01-5tall oil, sodium saltAdmixtures31 December 2031178467701-06-8tallow oleineAdmixtures31 December 2031 1785533-74-4tetrahydro–3,5-dimethyl-1,3,5-thiadiazine-2-thioneAdmixtures, organic additions, formwork release agentsBiocideOnly to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368.31 December 202817869014-85-12,4,7,9-tetramethyl-5-decyne–4,7-diol, ethoxylatedAdmixtures31 December 20341787126-71-6triisobutyl phosphateOrganic additions31 December 20311788102-71-6triethanolamine (2,2,2-nitrilotriethanol)Admixtures, grinding aids2,5 - expressed as the sum of triethanolamine and the hydrochloride adduct expressed as triethanolamine31 December 203417892943-75-1triethoxyoctylsilaneAdmixtures31 December 2031

17909014-63-5xylan (rosin wood)Admixtures31 December 20281791107-21-1ethane–1,2-diol1500 - expressed as ethyleneglycol.31 December 2034179211138-66-2xanthan gumAdmixturesMaximum dosage = 0,15 % (w/w) in concrete.31 December 20281793111-42-22,2'-iminodiethanolAdmixturesMaximum dosage = 0,004 % (w/w) in concrete.31 December 20311794111-46-6diethylene glycol1500 - expressed as ethyleneglycol31 December 20341795122-20-3triisopropanolamine (1,1',1''-nitrilopropane-2-ol) (TIPAL)25031 December 20341796141-43-52-aminoethanol2,5Maximum dosage = 0,004 % (w/w) in concrete.31 December 2034179715214-89-82-acrylamido-2-methylpropanesulfonic acid2,531 December 2034179825322-69-4polypropylene glycol31 December 2034 179955965-84-9Reaction mass of 5-chloro-2-methyl–1,2-thiazol-3(2H)-one and 2-methyl-1,2-thiazol-3(2H)-one (3:1) (CIT/MIT)Admixtures, organic additions, formwork release agentsBiocideOnly to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368.31 December 2034180056-81-5glycerol31 December 2034180157-13-6urea31 December 2034180287-69-4tartaric acidAdmixtures31 December 203418039002-89-5polyvinyl alcoholOrganic additions31 December 20371804108-78-12,4,6-triamine-1,3,5-triazine125Maximum dosage = 0,004 % (w/w) in concrete.31 December 20281805126-73-8tributyl phosphateAdmixtures, organic additions, formwork release agentsDefoamerMaximum dosage = 0,004 % (w/w) in concrete.31 December 20281806141-22-0ricinoleic acid210031 December 20281807144-62-7oxalic acid30031 December 2034 180860-00-4edetic acid (EDTA)Maximum dosage = 0,004 % (w/w) in concrete.31 December 2034180968412-29-3hydrolysed starchMaximum dosage = 0,15 % (w/w) in concrete.31 December 202818109000-65-1tragacanth gumMaximum dosage = 0,2 % (w/w) in concrete.31 December 202818112478-10-64-hydroxybutylacrylateOrganic additions31 December 203118129003-01-4polyacrylic acidOrganic additions31 December 203118139003-11-6poly(ethylenepropylene)glycolAdmixtures31 December 20371814100-42-5styrene31 December 202818151007848-63-6tert-decanoic acid, ethenyl ester, polymer with ethene, ethenyl acetate and methyl 2-methyl-2-propenoateOrganic additions31 December 20341816100-97-0hexamethylentetramine750 - expressed as formaldehyde31 December 20341817102782-43-4alcohols, C9-C11, branched and linear, ethoxylated propoxylatedAdmixtures31 December 2028 1818103-11-72-ethylhexyl acrylate2,531 December 2034181910378-23-1mercaptoethanolAdmixtures31 December 20281820104-76-72-ethyl-1-hexanolAdmixtures150031 December 20341821105-59-9N-methyl diethanolamineAdmixtures31 December 20311822106-91-22,3-epoxypropyl methacrylate1,031 December 20281823106-99-0butadiene0,131 December 20281824107-13-1acrylonitrile0,131 December 20281825107-96-0mercaptopropionic acidAdmixtures31 December 20311826108-05-4acetic acid, vinyl ester60031 December 20281827108-31-6maleic anhydride1500 - expressed as maleic acid.31 December 20341828110-16-7maleic acid1500 – expressed as maleic acid.31 December 2034

1829110-63-41,4-butanediol250 - expressed as 1,4-butanediol.31 December 20341830110-97-41,1'-iminodipropan-2-olAdmixtures31 December 20311831111-82-0methyl laurate31 December 20311832111-90-02-(2-ethoxyethoxy)ethanolAdmixtures31 December 20311833112-27-6triethyleneglycol31 December 20341834112-30-1decan-1-ol31 December 20341835112-34-5diethylene glycol monobutyl etherAdmixtures31 December 20341836112-92-5octadecan-1-ol31 December 20311837119-47-16,6'-di-tert-butyl-2,2'-methylenedi-p-cresolAdmixtures7531 December 20281838122-96-3piperazine–1,4-diethanolAdmixtures31 December 20311839123-31-9hydroquinone3031 December 20281840125005-87-0diutan gumAdmixtures31 December 2031 1841126-30-72,2-dimethyl–1,3-propanediol2,531 December 20341842126-86-32,4,7,9-tetramethyldec-5-in–4,7-diolAdmixtures31 December 20311843128-37-02,6-di-tert-butyl-p-cresolOrganic additions15031 December 203418441338-41-6sorbitan monostearate31 December 2034184513463-41-7zinc, bis(1-hydroxy-2(1H)-pyridinethionato-O,S)-, (T-4)-Organic additions0,1For zinc, refer to Annex V.31 December 20281846140-88-5ethyl acrylate300 - expressed as acrylic acid.31 December 20341847141-32-2butyl acrylate300 - expressed as acrylic acid.31 December 20341848141-78-6ethyl acetate31 December 20341849142-31-4sodium octyl sulfate31 December 20311850142-87-0sodium decyl sulfate31 December 2031 1851143-19-19-octadecenoic acid (9Z)-, sodium salt (1:1)Admixtures, organic additions, formwork release agentsAdditive for formwork release agents31 December 20281852143-22-62-(2-(2-butoxyethoxy)ethoxy)ethanolAdmixtures31 December 20311853150413-26-6poly(oxy–1,2-ethanediyl), .alpha.-sulfo-.omega.-(isotridecyloxy)-, sodium salt (1:1)Admixtures31 December 20371854150-76-5hydroquinone methyletherAdmixtures31 December 2031185515763-76-5sodium p-cumenesulfonateAdmixtures31 December 203118561663-39-4tert-butyl acrylate300 - expressed as acrylic acid.31 December 203418571879-09-02,4-dimethyl-6-tert-butyl-phenolAdmixtures31 December 20311858204336-40-3oxirane, methyl-,polymer with oxirane, mono(3,5,5-trimethylhexyl) etherAdmixtures31 December 2034 18592146-71-6vinyl laurate (dodecanoic acid, ethenyl ester)Organic additions31 December 203418602373-38-8butanedioic acid, sulfo-, 1,4-bis(1,3-dimethylbutyl) ester, sodium saltOrganic additions31 December 203118612425-77-62-hexyldecan-1-olAdmixtures31 December 2031186224800-44-0tripropyleneglycol31 December 2034186324937-78-8acetic acid ethenyl ester, polymer with etheneOrganic additions31 December 2034186425190-52-7polypropyleneglycol stearateAdmixtures31 December 2037186525584-83-2hydroxypropyl acrylateAdmixtures31 December 2031186626172-55-45-chloro-2-methyl-2H-isothiazol-3-oneAdmixtures, organic additions, formwork release agentsBiocideOnly to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368.31 December 2028186726221-27-2poly(vinyl alcohol-co-ethylene)Organic additions31 December 2037186826399-02-02-ethylhexyl oleateOrganic additions31 December 2031

186927813-02-12-​propenoic acid, 2-​methyl-​, monoester with 1,​2-​propanediolAdmixtures31 December 2031187028098-03-5octanoic acid, compound with 2-aminoethanol (1:1)Admixtures, organic additions, formwork release agentsAdditive for formwork release agents31 December 2028187129736-24-1acetic acid, 2-hydroxy-2sulfo-, sodium salt (1:2)Organic additions31 December 20311872353752-63-32-propenoic acid, homopolymer, ester with α-methyl-ω-hydroxypoly(oxy–1,2-ethanediyl), graftOrganic additions31 December 2037187336653-82-4hexadecan-1-ol31 December 2034187437208-08-5hydroxybutylcelluloseAdmixtures31 December 20281875300-92-5aluminium distearateFor aluminium, refer to Annex V.31 December 203118764402-30-62-​propanol, 1,​1'-​(methylimino)​bis-Admixtures31 December 2031 187750-81-7ascorbic acid31 December 2028187850985-38-1poly(oxy–1,2-ethanediyl), .alpha.-(4-hydroxybutyl)-.omega.-hydroxyAdmixtures31 December 20341879513-42-82-methyl-2-propen-1-olAdmixtures31 December 2031188051668-30-5oxirane, methyl-, polymer with oxirane, octadecanoateAdmixtures31 December 2037188152383-89-8dodecanoic acid, ethenyl ester, polymer with chloroethene and etheneOrganic additions31 December 2037188252668-97-0oleic acid-polyethyleneglycol-diesterAdmixtures31 December 2037188352933-07-0phosphoric acid, isotridecyl esterAdmixtures31 December 202818845395-50-6 tetrahydro-1,3,4,6-tetrakis(hydroxymethyl) imidazo[4,5-d]imidazole–2,5(1H,3H)-dione Organic additions31 December 2031 1885541-02-6decamethylcyclopentasiloxaneAdmixtures31 December 20281886544-63-8myristic acid31 December 2028188755406-53-63-iodo-2-propynyl butylcarbamateAdmixtures, organic additions, formwork release agentsBiocideOnly to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368.31 December 20311888556-67-2octamethylcyclotetrasiloxaneAdmixtures31 December 20281889557-05-1zinc distearateWater repellentFor zinc, refer to Annex V.31 December 203118905625-90-1N,N'-methylenebismorpholineAdmixtures, organic additions, formwork release agentsBiocide0,1Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368.31 December 2028189156-87-1L-lysin31 December 2037 1892595585-15-2D-glucurono-D-gluco-6-deoxy-L-mannan, acetate, calcium magnesium potassium sodium saltAdmixtures31 December 2028189361791-14-8amines, coco alkyl, ethoxylatedAdmixtures31 December 2028189463330-34-7tert-decanoic acid, ethenyl ester, polymer with ethene and ethenyl acetateOrganic additions31 December 2034189564-17-5ethanol31 December 2034189664742-47-8distillates (petroleum), hydrotreated lightFormwork release agents31 December 2031189764742-48-9naphtha (petroleum), hydrotreated heavy; low boiling point hydrogen treated naphthaFormwork release agents0,131 December 2028189864742-95-6solvent naphtha (petroleum), light arom.Formwork release agents0,131 December 2028189965997-04-8rosin, fumaratedAdmixtures31 December 2031

19006683-19-8pentaerythritol tetrakis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)-propionate]31 December 2034190167-56-1methanol31 December 2034190267-63-02-propanol31 December 2034190368442-68-2benzenamine, N-phenyl-, styrenatedOrganic additions31 December 2031190469011-36-5isotridecanol, ethoxylatedAdmixtures31 December 2031190571-36-31-butanol31 December 2034190672121-88-1D-glucopyranuronic acid, polymer with 6-​deoxy-​L-​mannose, D-​glucose and D-​mannose, calcium potassium sodium salt (Welan gum)Admixtures31 December 2037190774-85-1etheneAdmixtures31 December 2034190875-21-8ethylene oxide0,131 December 2028 190975-91-2tert-butyl hydroperoxide (TBHP)Organic additions31 December 2028191078041-14-2oxirane, methyl-, polymer with oxirane, ether with 1,2,3-propanetriol (3:1), (9Z)-9-octadecenoateAdmixtures31 December 2037191178-51-3tributoxyethyl phosphateAdmixtures, organic additions, formwork release agentsDefoamerMaximum dosage = 0,5 % (w/w) based on the addition or admixture.31 December 2031191279-06-1acrylamide0,131 December 2028191379-10-7acrylic acid300 - expressed as acrylic acid.31 December 2034191479-39-0methacrylamide0,131 December 2034191579-41-4methacrylic acid300 – expressed as methacrylic acid.31 December 203419168002-13-9rape oil31 December 202819178015-86-9carnauba wax31 December 2028 19188028-48-6orange, sweet, extractAdmixtures31 December 203119198028-89-5caramel (color)Admixtures31 December 203119208042-47-5white mineral oil (petroleum)Curing compounds31 December 2031192180-62-6methacrylic acid, methyl ester300 - expressed as methacrylic acid.31 December 20341922818-61-1acrylic acid, monoester with ethyleneglycol300 - expressed as acrylic acid.31 December 2034192382973-76-0poly(oxy–1,2-ethanediyl), a,a'-(2,2-dimethyl–1,3-propanediyl)bis[w-hydroxy-Admixtures31 December 20281924868-18-8sodium tartrateAdmixtures31 December 20311925868-77-92-hydroxyethyl methacrylate300 - expressed as methacrylic acid.31 December 2034 19269003-20-7acetic acid ethenyl ester, homopolymerOrganic additions31 December 203719279003-39-8polyvinylpyrrolidone31 December 203719289004-58-4cellulose, ethyl 2-hydroxyethyl etherAdmixtures31 December 202819299004-64-2cellulose, 2-hydroxypropyl etherAdmixtures31 December 202819309004-74-4poly(oxy–1,2-ethanediyl), α-methyl-ω-hydroxy-Admixtures31 December 203719319004-82-4sodium lauryl ether sulfateAdmixtures31 December 202819329005-00-10stearyl alcohol, ethoxylate (2 EO)Admixtures31 December 203119339005-65-6polyethyleneglycol sorbitan monooleate31 December 202819349032-46-6cellulose, 2-sulfoethyl etherAdmixtures31 December 202819359036-19-5(1,1,3,3-tetramethylbutyl)-phenyl-polyethylenglycolAdmixtures31 December 2028 19369043-30-5isotridecanol, ethoxylatedAdmixtures31 December 20281937923-02-4N-(hydroxymethyl)methacrylamide2,531 December 20341938925-60-0acrylic acid, propylester300 - expressed as acrylic acid.31 December 2028193996-33-3acrylic acid, methyl ester300 - expressed as acrylic acid.31 December 2034194097-65-4itaconic acid31 December 20341941999-61-12-hydroxypropyl acrylate2,5 - expressed as the sum of acrylic acid, 2-hydroxypropyl ester and acrylic acid, 2-hydroxy-isopropyl ester.31 December 2028

1942acetic acid ethenyl ester, polymer with ethene, sodium 2-methyl-2-[(1-oxo-2-propen-1-yl)amino]-1- propanesulfonate and ethenyl tert-decanoateOrganic additions31 December 20341943acrylic acid and methacrylic acid ester of dihydric aliphatic alcohols with chain length C2-C18Admixtures31 December 20281944fatty alcohol ethoxylateAdmixtures31 December 20281945polyethylenglycol ether (EO = 1-50) of linear and branched primary alcoholsAdmixtures31 December 20281946vinyl ether of monohydric aliphatic saturated alcohols with chain length C1-C18Admixtures31 December 2028 1947isothiazolinoneAdmixtures, organic additions, formwork release agentsPreservativeOnly to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368.31 December 2028 Table 3 European positive lists of groups of organic constituents for cementitious materials EUPL NumberEC NumberCAS NumberOrganic cementitious constituent name group nameGeneric constituent categoryTechnical functionMaximum Tolerable Concentration at the tap (MTCtap, cementitious) (μg/l)Total Maximum Tolerable Concentration at the tap (MTC(T)tap, cementitious) in μg/l (A)Conditions of useExpiry dateValue for the organic cementitious constituentValues for other relevant chemical species194868439-45-2alcohols, C6-C12, ethoxylatedAdmixtures31 December 2031194968439-50-9alcohols, C12-C14, ethoxylatedAdmixtures150031 December 2031195068551-12-2alcohols, C12-C16, ethoxylatedAdmixtures150031 December 2031 195196130-61-9alcohols, C9-C11 ethoxylated sulfates, sodium saltsAdmixtures150031 December 2031195268585-34-2alcohols, C10-C16, ethoxylated, sulfates, sodium saltsAdmixtures150031 December 2031195368891-38-3alcohols, C12-C14, ethoxylated, sulfates, sodium saltsAdmixtures150031 December 20311954126950-60-5alcohols, C12-C14, secondaryAdmixtures150031 December 2031195584133-50-6alcohols, C12-C14, secondary ethoxylatedAdmixtures25031 December 2031195668439-57-6alkene (sulfonic acid, C14-C16-alkane hydroxy & C14-C16-alkene sodium salts)Admixtures150031 December 2031195725155-30-0alkyl aryl sulfonate (sodium dodecylbenzenesulfonate)Admixtures150031 December 2031195885117-50-6alkyl benzene sulfonate, sodium (mono C10-C14-alkyl derivatives sodium)Admixtures150031 December 2031 195970592-80-2 & 1643-20-5alkyl dimethylamine oxideAdmixtures150031 December 2031196068585-47-7alkyl sulfate, sodium (mono C10-C16-alkyl esters)Admixtures150031 December 2031196168411-30-3alkylaryl sulfonate (benzenesulfonic acid, C10-C13 derivs, sodium)Admixtures150031 December 2031196268154-99-4alkylpolyethoxypolypropoxy benzyletherAdmixtures31 December 203419637360-53-4aluminium formateAdmixturesFor aluminium, refer to Annex V.31 December 2031196461788-90-7amines, coco alkyldimethyl, N-oxidesAdmixtures0,1 - expressed as amines31 December 2031196572906-11-7alkyl sulfate sodium (mono C9-C13 alkyl esters)Admixtures30031 December 2031196668784-08-7butanedioic acid, sulfo-, C-(2-coco amidoethyl) esters, disodium saltsAdmixtures31 December 2031

196768603-42-9coconut diethanolamide (coco N,N-bis hydroxyethyl)Admixtures31 December 2031196884712-53-8N-coco sulfosuccinamate, disodium (butanoic acid,4-amino-4-oxy-2-sulfo-,N-coco alkyl derivs)Admixtures31 December 2031196967762-90-7dimethyl siloxane reaction products with silicaAdmixtures31 December 2031197067701-03-5fatty acids, C16-C18 (stearic acid)Admixtures31 December 2031197161791-08-0fatty acids, coco, reaction products with ethanolamine, ethoxylatedAdmixtures31 December 2031197250-99-7glucoseAdmixtures31 December 2031197350-21-5lactic acidAdmixtures31 December 2034197491078-68-1naphthalenesulfonic acids, reaction products with formaldehyde, sodium saltsAdmixtures31 December 2031 197568002-63-1quaternary ammonium, C14-C18, alkyltrimethyl chloridesAdmixtures300For ammonium, refer to Annex V.31 December 2031197661789-40-0quaternary ammonium compounds, (carboxymethyl)(3-cocoamidopropyl)dimethyl-hydroxides, inner saltsAdmixtures300For ammonium, refer to Annex V.31 December 2031197773138-82-6, 61790-51-0resin acids and rosin acidsAdmixtures31 December 203119788050-09-7rosinAdmixtures31 December 2034197991648-56-5sodium dodecyl to pentadecyl ether sulfonatesAdmixtures150031 December 2031198025322-68-3polyethylene glycol31 December 2034198157-55-6propane–1,2-diol (1,2 propylene glycol)31 December 2034198275-56-9propylene oxide0,131 December 20281983107-22-2glyoxal31 December 2028 19841000817-22-0 fatty acids, C8-C18 and C18-unsatd., reaction products with diethanolamine and propylene oxide Admixtures, organic additions, formwork release agentsAdditive for formwork release agents31 December 20311985103818-93-5alcohols, C9-C11, ethoxylated propoxylatedAdmixtures31 December 203119861400790-00-2alcohols, C9-C11-branched, ethoxylated propoxylatedAdmixtures31 December 20311987169107-21-5alcohols, C9-C11-branched, ethoxylatedAdmixtures31 December 2031198825085-46-5acetic acid ethenyl ester, polymer with chloroethene and etheneOrganic additions31 December 2037198925213-24-5acetic acid ethenyl ester, polymer with ethenolAdmixturesMW > 1000 Da.31 December 2034199025265-71-81,1'-oxydi-2-propanol, mixture of isomersOrganic additions31 December 203419914080-31-33,5,7-triaza-1-azoniatricyclo[3.3.1.13,7]decane,1-(3-chloro-2-propenyl)-, chloride1531 December 2031 199263148-62-9polydimethylsiloxaneAdmixtures, organic additions, formwork release agentsDefoamerMaximum dosage = 0,5 % (w/w) based on the addition or admixture.31 December 2034199364742-52-5distillates (petroleum), hydrotreated heavy naphthenic; base oil — unspecifiedFormwork release agents0,131 December 2028199464742-53-6distillates (petroleum), hydrotreated light naphthenic; base oil — unspecifiedFormwork release agents0,131 December 2028199564742-55-8distillates (petroleum), hydrotreated light paraffinicCuring compounds0,131 December 2028199664742-56-9distillates (petroleum), solvent-dewaxed light paraffinic; base oil — unspecifiedFormwork release agents0,131 December 2028199766455-15-0alcohol, C10-C14, ethoxylatedAdmixtures31 December 2031199867701-01-3fatty acid, C12-C1831 December 2031

199967701-05-7fatty acid, C16-C18 and C18-unsaturatedAdmixtures, organic additions, formwork release agentsAdditive for formwork release agents31 December 2031200067701-08-0fatty acids, C8-C18 and C18-unsaturatedAdmixtures, organic additions, formwork release agentsAdditive for formwork release agents31 December 2031200167701-26-2glycerides, C12-C18 (triglycerides C12-C18 (even numbered))Admixtures, organic additions, formwork release agentsAdditive for formwork release agents31 December 2031200268131-39-5alcohols, C12-C15, ethoxylatedAdmixtures31 December 2031200368131-40-8alcohols, C11-C15-secondary, ethoxylatedAdmixtures31 December 2031200468154-97-2alcohols, C10-C12, ethoxylated propoxylatedAdmixtures31 December 2031200568439-46-3alcohols, C9-C11, ethoxylatedAdmixtures31 December 2031200668439-49-6polyethyleneglycol (EO = 1-50) ethers of linear and branched primary (C8-C22) alcohols31 December 2034 200768476-78-8molassesAdmixtures31 December 2031200868526-86-3alcohols, C11-C14-IsoAdmixtures31 December 2031200968551-07-5alcohols, C8-C18Admixtures31 December 2031201068611-44-9silane, dichlorodimethyl-, reaction products with silica31 December 2031201168920-66-1alcohols, C16-C18 and C18-unsatd., ethoxylatedAdmixtures31 December 2031201268954-91-6poly(oxy–1,2-ethanediyl), α-(3-carboxy-1-oxosulfopropyl)-ω-hydroxy-, C10-C12-alkyl ethers, disodium saltsAdmixtures31 December 2037201369013-18-9alcohols, C8-C18, ethoxylated propoxylatedAdmixtures31 December 2031201469227-21-0alcohols, C12-C18, ethoxylated propoxylatedAdmixtures31 December 2031201570955-07-6alcohols, tallow, propoxylatedAdmixtures31 December 2031 201671786-60-2ethanol, 2,2'-iminobis-, N-C12-C18-alkyl derivs.Admixtures, organic additions, formwork release agentsAdditive for formwork release agents31 December 2031201778330-21-9alcohols, C11-C14-iso-, C13-rich, ethoxylatedAdmixtures31 December 203120188002-74-2paraffin waxes and hydrocarbon waxesOrganic additions31 December 2031201985409-27-4resin acidAdmixtures31 December 2031202085586-25-0rapeseed oil methyl ester31 December 2031202193-83-4N,N-bis(2-hydroxyethyl)oleamideAdmixtures, organic additions, formwork release agentsAdditive for formwork release agents31 December 2031202297043-91-9alcohols, C9-C16, ethoxylatedAdmixtures31 December 2031rapidmeentfatty acid polyglycol esters31 December 20342024methallylsulfonic acid, salts0,2531 December 2031 2025 polycarboxylate ether made of a combination of the following acrylic acid (CAS No. 79-10-7), and/or poly(oxy–1,2-ethanediyl), α-[4-(ethenyloxy)butyl]-ω-hydroxy- (CAS No. 126682-74-4), and/or poly(oxy–1,2-ethanediyl), α-(3-methyl-3-buten-1-yl)-ω-hydroxy- (CAS No. 110412-77-6), and/or hydroxypropylacrylate (CAS No. 25584-83-2), and/or polyethylene glycol monomethallylether (CAS No. 31497-33-3) Admixtures poly(oxy–1,2-ethanediyl), α-(3-methyl-3-buten-1-yl)-ω-hydroxy- (CAS No. 110412-77-6) MTCtap = 1 μg/l isoprenol MTCtap = 2,5 μg/l Oligomers < 1000 Da < 1 %; residual contents of acrylic acid < 0,05 %;

hydroxypropyl acrylate (CAS No. 25584-83-2) < 0,0025 %; ethylene oxide (CAS No.75-21-8) < 0,0005 %. 31 December 2034 2026melamine sulfonatesAdmixtures31 December 20312027naphthalene sulfonatesAdmixtures31 December 20312028substances releasing formaldehydeAdmixtures, organic additions, formwork release agentsPreservativeOnly to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368.31 December 2031 Notes:

1. Note 1: Explanation of the notes in Tables 2 and 3 i. The meaning of the notes provided in Tables 2 and 3 is as follows: A. Total Maximum Tolerable Concentration at the tap (MTC(T)tap, cementitious) means the maximum permitted concentration of specified substances migrating from cementitious materials into water intended for human consumption as total of the element or ion indicated in Annex 5. B. Relevant chemical species are those identified in accordance with Section 3, Annex IV to Commission Implementing Decision (EU) 2024/365.
2. Note 2: Scope of an authorisation i. Where an organic cementitious constituent appearing on the list as an individual entry is also covered by a group entry, the conditions of use and specifications and expiry dates applying to this organic cementitious constituent shall be those indicated in the individual entry exclusively. ii. Where a organic cementitious constituent appears on the list as its anhydrous form, its approval shall be considered to covers its hydrated form. iii. Unless stated otherwise in Tables 2 and 3, the following salts of authorised acids, phenols and alcohols shall be considered covered by that authorisation: aluminium, ammonium, barium, calcium, cobalt, copper, europium, gadolinium, iron, lanthanum lithium, magnesium, manganese, potassium, sodium, terbium, and zinc. This is subject to compliance with the corresponding MTCtap, cementitious value for the element or ion which is the same as shown in Annex V for cementitious materials. In certain cases, where the safety assessment indicates concerns on the use of the free acids, only the salts should be authorised by indicating in the list the name as … acid(s), salts. iv. For the purposes of the first European positive list of organic cementitious constituents, polymers used as constituents of admixtures which are exclusively manufactured with authorised monomers shall be considered covered by those authorisations. v. After the first European positive list of organic cementitious constituents, in the case of polymer, the entry in the European positive list shall be for the monomer(s) and other reactant(s) used in the polymer, and polymers manufactured from authorised monomer(s) and other reactant(s) shall be considered to be covered by these entries. vi. In the case of polymers used as constituents of fibres or additives, points v to viii of Section 2 of Annex I shall apply mutatis mutandi. vii. Fibres made of metallic compositions approved on the European positive list for metallic materials, are also authorised for use in cementitious materials.

viii. An entry in Table 1 covers a nanoform only when it is explicitly stated in the approval of that entry. 3. Note 3: Additional conditions of use i. Only biocidal active substances of Product-type 6 (Preservatives for products during storage) in accordance with Regulation (EU) No 528/2012 may be used as organic cementitious constituents.

Annex

ANNEX IV EUROPEAN POSITIVE LIST OF COMPOSITIONS OF ENAMELS, CERAMIC AND OTHER INORGANIC MATERIALS Table 1 European positive lists of compositions of enamels, ceramics and other inorganic materials EUPL NumberMaterial categoryMaterial sub-categoryAccepted compositionAccepted inorganic composition constituentsRelevant chemical species to be analysed in the migration waters (A)Maximum Tolerable Concentration at the tap for relevant chemical species (MTCtap, inorganic) in μg/l (A)Conditions of useExpiry dateConstituent identityMinimum concentration (% w/w)Maximum concentration (% w/w)2029EnamelEnamelEnamelSiO22580Al, B, Ba, Cd, Ce, Co, Cr, Cu, Li, Mn, Mo, Ni, Pb, Sb, Sr, Ti, ZrFor elements, refer to Annex V.31 December 2031B2O3020Na2O030K2O010Li2O010CaO010BaO015SrO05,0Sb2O301,0MgO05,0CeO2015ZnO010Al2O305,0CoO05,0NiO03,0CuO03,0MnO205,0 Fe2O305,0MoO305,0P2O505,0SnO205,0TiO2016ZrO2030F010Cr2O303,02030EnamelGlassesBorosilicate glassSiO280100Al, B, Cd, PbFor elements, refer to Annex V.31 December 2031B2O37,013Al2O302,4Na2O02,0K2O02,02031EnamelGlassesSoda-lime glassSiO26085Al, B, Ba, Cd, Ce, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sb, Sr, Ti, ZrFor elements, refer to Annex V.31 December 2031B2O3015Al2O3010,0Na2O015K2O05,0CaO015MgO05,0BaO05,0 SrO01,0Sb2O301,0CeO201,0CoO01,0NiO01,0CuO01,0MnO201,0Fe2O301,0MoO301,0SnO201,0TiO201,0ZrO201,0Cr2O301,02032CeramicsOxide ceramicsAl2O3 and SiO2 ceramicsAl2O3099,99Al, B, Ba, Cd, Cr, Mn, Pb, Sr, Ti, Y, ZrFor elements, refer to Annex V.Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition.31 December 2031SiO2092B2O302,0BaO00,2CaO08,0Cr2O302,0Fe2O304,0K2O03,0 MgO03,0MnO203,5Na2O03,0P2O500,1SrO00,5TiO202,5ZrO203,0Y2O300,42033CeramicsOxide ceramicsZrO2 ceramicsAl2O3095Al, Cd, Hf, Pb, Pr, Ti, Y, ZrFor elements, refer to Annex V.Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition.31 December 2031ZrO25,099HfO202,0MgO04,0CaO00,1Fe2O300,1SiO205,0TiO200,5Y2O308,5Pr2O300,2Na2O00,1K2O00,1 2034CeramicsOxide ceramicsHard ferrite ceramicsFeO/Fe2O38095Al, Ba, Bi, Cd, Cr, Cu, Mn, Ni, Pb, SrFor elements, refer to Annex V.Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition.31 December 2031Al2O303,0BaO012CaO03,0Cr2O300,1Bi2O300,4MnO03,0NiO00,1P2O500,1SiO205,0SrO012MgO00,1Na2O00,1ZnO00,1CuO00,12035CeramicsNon-oxide ceramicsSilicon carbide (SiC) ceramicsSiC78100Al, B, Cd, Ni, Pb, Ti, Y, Zr Benzo-(a)-pyrene Sum of 4 PAHs:Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene

For elements, refer to Annex V. benzo-(a)-pyrene MTCtap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTCtap = 0,01 Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition.31 December 2031Si022Al02,0Al2O305,0B03,0C05,0Ca00,1Fe00,2 Fe2O303,0Na00,1Ni00,1SiO203,0Ti00,2Y2O303,0ZrB2011MgO00,12036CeramicsNon-oxide ceramicsSilicon carbide with free carbon (SISIC-C) ceramicsSiC5590Al, B, Cd, Ni, Pb, Ti Benzo-(a)-pyrene Sum of 4 PAHs: Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene For elements, refer to Annex V. benzo-(a)-pyrene MTCtap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTCtap = 0,01 Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition.31 December 2031C5,040Al00,2B00,5Ca00,1Fe00,2Ni00,1Si2,015SiO202,5Ti00,2 2037CeramicsNon-oxide ceramicsTungsten carbide (WC) ceramicsWC90100Cd, Cr, Mo, Ni, Pb, W Benzo-(a)-pyrene Sum of 4 PAHs: Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene For elements, refer to Annex V. benzo-(a)-pyrene MTCtap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTCtap = 0,01 Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition.31 December 2031Cr3C201,0Mo01,0Ni08,02038CeramicsNon-oxide ceramicsSilicon nitride (SN) ceramicsSi3N47897Al, Cd, La, Pb, Ti, Y, ZrFor elements, refer to Annex V.Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition.31 December 2031Al2O307,0CaO02,0Fe2O301,0La2O306,0MgO04,0SiO207,0TiO205,0Y2O303,0ZrO203,0 2039CeramicsCeramic materials made of carbonGraphitesNo specific composition requirements. The starting materials include lignite, coal or petrol coke, which are mixed with a binding agent such as tar or a plastic resin, and then annealed at 600 °C to 1000 °C. This produces carbon graphites, which are used for applications such as slide bearings, sealing rings or pump components. In another optional manufacturing step, the graphitisation, these carbon graphites are annealed once again at up to 3000 °C. This causes the individual graphite crystals to enlarge, causing an increase in density. Contaminants are burned off to improve purity.Cd, Pb Benzo-(a)-pyrene Sum of 4 PAHs: Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene

For elements, refer to Annex V. benzo-(a)-pyrene MTCtap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTCtap = 0,01 Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. First annealing at 600 °C to 1000 °C; second annealing at up to 3000 °C. For graphites that have been impregnated with an organic resin, the resin should be assessed separately based on the coating guideline.31 December 20312040CeramicsCeramic materials made of carbonAmorphous carbon layerNo specific composition requirements. These coatings may be produced using a number of different methods. This leads to the formation of crystalline layers of graphite and diamond.Cd, Pb Benzo-(a)-pyrene Sum of 4 PAHs: Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene For elements, refer to Annex V. benzo-(a)-pyrene MTCtap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTCtap = 0,01 Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition.31 December 2031 2041CeramicsCeramic materials made of carbonCarbon fibresNo specific composition requirements. These fibres are made of organic fibres, such as viscose or polyacrylonitrile fibres, that are transformed into carbon by pyrolysis.Cd, Pb Benzo-(a)-pyrene Sum of 4 PAHs: Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene For elements, refer to Annex V. benzo-(a)-pyrene MTCtap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTCtap = 0,01 Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition.31 December 20312042Other inorganic materialsMixed metal oxidesMixed metal oxides (MMO) coatings of iridium oxide and tantalum oxideIrO25085No migration tests required for Ir or Ta.Used as coatings of titanium anodes. Maximum layer thickness: 20 μm.31 December 2031Ta2O51550 Notes:

1. Note 1: Explanation of the notes in Table 1 The meaning of the note provided in Table 1 is as follows: A. Relevant chemical species are those identified in accordance in accordance with Section 3, Annex IV to Commission Implementing Decision (EU) 2024/365.
2. Note 2: Additional conditions of use For the purposes of this positive list, for elements of relevance in the migration water corresponding MTCtap, inorganics values shown in Annex V for enamels, ceramic and other inorganic materials shall apply

Annex

ANNEX V MTCTAP FOR METALS OF RELEVANCE IN THE MIGRATION WATER The following is provided for information purposes only: (a) Reference value; (b) Allocation factor; (c) MTCtap for metallic materials. Table 1 MTCtap for metals for the specific material types MetalReference valueOrganic materialsMetallic materialsCementitious materialsEnamels, ceramic and other inorganic materialsMTCtap, organics [μg/l]Allocation factorMTCtap, metallic [μg/l]Allocation factorMTCtap, cementitious [μg/l]Allocation factorMTCtap, inorganic [μg/l]Allocation factorAluminiumAlParametric value in Part C, Annex I of Directive (EU) 2020/21842010%10050%3015%10050%AmmoniumNH4+Parametric value in Part C, Annex I of Directive (EU) 2020/21845010%5010%AntimonySbParametric value in Part B, Annex I of Directive (EU) 2020/21841,010%5,050%1,010%1,010%ArsenicAsParametric value in Part B, Annex I of Directive (EU) 2020/21845,050%1,010%BariumBaSpecific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/20115010%5010%5010% BismuthBiNot availableNot availableNot availableBoronBParametric value in Part B, Annex I of Directive (EU) 2020/218415010%15010%15010%CadmiumCdParametric value in Part B, Annex I of Directive (EU) 2020/21842,550%0,510%0,255%CalciumCaNot applicableCeriumCeNot availableNot availableNot availableChromiumCrParametric value in Part B, Annex I of Directive (EU) 2020/2184, until 12 January 20365,010%2550%5,010%5,010%Parametric value in Part B, Annex I of Directive (EU) 2020/2184, after 12 January 20362,510%1350%2,510%2,510%CobaltCoSpecific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/20112,510%2,510%1350%CopperCuParametric value in Part B, Annex I of Directive (EU) 2020/218420010%180090%20010%20010% EuropiumEuSpecific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/20112,510%2,510%FluorideF-Parametric value in Part B, Annex I of Directive (EU) 2020/218415010%15010%GadoliniumGaSpecific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/20112,510%2,510%HafniumHfNot availableNot availableIronFeParametric value in Part C, Annex I of Directive (EU) 2020/21842010%10050%2010%2010%LanthanumLaSpecific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/20112,510%2,510%1350%LeadPbParametric value in Part B, Annex I of Directive (EU) 2020/21842,550%0,510%0,255%LithiumLiSpecific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/20113010%3010%3010% MagnesiumMgNot applicableManganeseMnParametric value in Part C, Annex I of Directive (EU) 2020/21845,010%2550%5,010%2550%MolybdenumMoNot availableNot availableNot availableNickelNiParametric value in Part B, Annex I of Directive (EU) 2020/21841050%2,010%2,010%PotassiumKNot applicablePraseodymiumPrNot availableNot availableSeleniumSeParametric value in Part B, Annex I of Directive (EU) 2020/21841050%SodiumNaNot applicableStrontiumSrNot availableNot availableTerbiumTbSpecific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/20112,510%TinSnNot availableTitaniumTiNot availableNot availableNot available