COUNCIL REGULATION (EU) 2025/1292 of 23 June 2025 amending Regulation (EU) 2021/2283 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products ANNEX ‘ANNEX

L_202501292EN.000101.fmx.xml Official Journal of the European Union EN L series 2025/1292 30.6.2025 COUNCIL REGULATION (EU) 2025/1292 of 23 June 2025 amending Regulation (EU) 2021/2283 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products THE COUNCIL OF THE EUROPEAN UNION, Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof, Having regard to the proposal from the European Commission, Whereas: (1) In order to ensure a sufficient supply of certain agricultural and industrial products which are produced in insufficient quantities in the Union and thereby avoid any disturbances on the market for those products, autonomous tariff quotas of the Union (‘quotas’) were opened by Council Regulation (EU) 2021/2283 (1). Within those quotas, products can be imported into the Union at reduced or zero duty rates. (2) As it is in the Union’s interest to ensure an adequate supply of certain industrial products, and having regard to the fact that identical, equivalent or substitute products are not produced in sufficient quantities within the Union, it is necessary to open new quotas with order numbers 09.2010, 09.2017, 09.2024, 09.2025, 09.2027, 09.2029, 09.2031 at zero duty rates for appropriate quantities of those products, as of 1 July 2025. (3) As the scope of the quota with order number 09.2585 has become inadequate to fulfil the needs of economic operators in the Union, TARIC codes 3907 61 00 20 and 3907 69 00 20 should be added to this quota as of 1 July 2025. (4) As it is no longer in the Union’s interest to maintain the quotas with order numbers 09.2563, 09.2808, and 09.2925, those quotas should be closed with effect from 1 July 2025. (5) In response to the Russian Federation’s ongoing war of aggression against Ukraine and the continued involvement of the Republic of Belarus in actions undermining Ukraine’s sovereignty and territorial integrity, the Union has adopted restrictive measures aimed at limiting trade benefits granted to Russia and Belarus. Council Regulation (EU) 2022/2563 (2) introduced an exception to the application of customs duties under autonomous tariff quotas for certain products originating in Russia and Belarus, specifically for quotas with order numbers 09.2600, 09.2742, 09.2698, and 09.2835, covering products falling under TARIC codes ex 2712 90 39 10, ex 2926 10 00 10, ex 3204 17 00 30, and ex 7604 29 10 30, respectively. Given the persistence of the geopolitical situation and the need to reinforce the effectiveness of the Union’s response, it is appropriate to discontinue that exception and to reinstate the application of customs duties on imports originating in Russia and Belarus under those quotas. Taking that measure ensures consistency with the Union’s restrictive trade policy and prevents economic benefits from being conferred upon entities operating in or supporting actions contrary to international law.

(6) Taking into account the amendments to be made and for the sake of clarity, the Annex to Regulation (EU) 2021/2283 should be replaced. (7) Regulation (EU) 2021/2283 should therefore be amended accordingly. (8) In order to avoid any interruption in the application of the quota scheme and to comply with the guidelines set out in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the quotas for the products concerned should apply from 1 July 2025. This Regulation should therefore enter into force as a matter of urgency, HAS ADOPTED THIS REGULATION:

Article 1 Regulation (EU) 2021/2283 is amended as follows: (1) in Article 1, paragraph 4 is replaced by the following: ‘4. The suspension laid down in paragraph 2 does not apply to products originating in Russia or in Belarus, including for quota order numbers 09.2600, 09.2742, 09.2698, and 09.2835. Consequently, imports of such products originating in Russia and Belarus shall be subject to the Common Customs Tariff duties as from 1 July 2025.’ ; (2) the Annex is replaced by the text set out in the Annex to this Regulation.

Article 2 This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union. It shall apply from 1 July 2025. This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Luxembourg, 23 June 2025. For the Council The President C. SIEKIERSKI (1) Council Regulation (EU) 2021/2283 of 20 December 2021 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products, and repealing Regulation (EU) No 1388/2013 (OJ L 458, 22.12.2021, p. 33, ELI: http://data.europa.eu/eli/reg/2021/2283/oj). (2) Council Regulation (EU) 2022/2563 of 19 December 2022 amending Regulation (EU) 2021/2283 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products (OJ L 330, 23.12.2022, p. 109, ELI: http://data.europa.eu/eli/reg/2022/2563/oj). ANNEX ‘ANNEX Order number CN code TARIC Description Quota period Quota volume Quota duty rate 09.2849 ex 0710 80 69 10 Mushrooms of the species Auricularia polytricha (uncooked or cooked by steaming or boiling), frozen, for the manufacture of prepared meals (1) (2) 1.1.-31.12. 700 tonnes 0 % 09.2913 ex 2401 10 35 ex 2401 10 70 ex 2401 10 95 ex 2401 10 95 ex 2401 10 95 ex 2401 20 35 ex 2401 20 70 ex 2401 20 95 ex 2401 20 95 ex 2401 20 95 91 10 11 21 91 91 10 11 21 91 Natural unmanufactured tobacco, whether or not cut in regular size, having a custom value of not less than EUR 450 per 100 kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 2402 10 00 (1) 1.1.-31.12. 3 000 tonnes 0 % 09.2828 2712 20 90 Paraffin wax containing by weight less than 0,75 % of oil 1.1.-31.12. 180 000 tonnes 0 % 09.2600 ex 2712 90 39 10 Slack wax (CAS RN 64742-61-6) 1.1.-31.12. 100 000 tonnes 0 % 09.2578 ex 2811 19 80 50 Sulphamidic acid (CAS RN 5329-14-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of the anti-caking agent silicon dioxide (CAS RN 112926-00-8) 1.1.-31.12. 27 000 tonnes 0 % 09.2928 ex 2811 22 00 40 Silica filler in the form of granules, with a purity by weight of 97 % or more of silicon dioxide 1.1.-31.12. 1 700 tonnes 0 % 09.2806 ex 2825 90 40 30 Tungsten trioxide, including blue tungsten oxide (CAS RN 1314-35-8 or CAS RN 39318-18-8) 1.1.-31.12. 12 000 tonnes 0 % 09.2819 ex 2833 25 00 30 Copper hydroxide sulfate (Cu4(OH)6(SO4)), hydrate (CAS RN 12527-76-3) with a purity by weight of 98 % or more 1.1.-31.12. 240 000 kilograms 0 % 09.2872 ex 2833 29 80 40 Caesium sulphate (CAS RN 10294-54-9) in solid form or as aqueous solution containing by weight 48 % or more but not more than 52 % of caesium sulphate 1.1.-31.12. 400 tonnes 0 % 09.2567 ex 2903 22 00 10 Trichloroethylene (CAS RN 79-01-6) with a purity by weight of 99 % or more 1.1.-31.12. 11 885 000 kilograms 0 % 09.2837 ex 2903 79 30 20 Bromochloromethane (CAS RN 74-97-5)

1.1.-31.12. 600 tonnes 0 % 09.2933 ex 2903 99 80 30 1,3-Dichlorobenzene (CAS RN 541-73-1) 1.1.-31.12. 2 600 tonnes 0 % 09.2700 ex 2905 12 00 10 Propan-1-ol (propyl alcohol) (CAS RN 71-23-8) 1.1.-31.12. 15 000 tonnes 0 % 09.2551 ex 2905 29 90 40 Prop-2-yn-1-ol (CAS RN 107-19-7) with a purity by weight of 99 % or more 1.1.-31.12. 150 tonnes 0 % 09.2830 ex 2906 19 00 40 Cyclopropylmethanol (CAS RN 2516-33-8) 1.1.-31.12. 20 tonnes 0 % 09.2851 ex 2907 12 00 10 O-cresol (CAS RN 95-48-7) having a purity of not less than 98,5 % by weight 1.1.-31.12. 20 000 tonnes 0 % 09.2704 ex 2909 49 80 20 2,2,2′,2′-Tetrakis(hydroxymethyl)-3,3′-oxydipropan-1-ol (CAS RN 126-58-9) 1.1.-31.12. 500 tonnes 0 % 09.2010 ex 2912 29 00 75 Cyclohex-3-ene-1-carbaldehyde (CAS RN 100-50-5) with a purity by weight of 98 % or more 1.7.-31.12. 77 500 kilograms 0 % 09.2565 ex 2914 19 90 70 Calcium acetylacetonate (CAS RN 19372-44-2) with a purity by weight of 95 % or more 1.1.-31.12. 400 tonnes 0 % 09.2852 ex 2914 29 00 60 Cyclopropyl methyl ketone (CAS RN 765-43-5) 1.1.-31.12. 300 tonnes 0 % 09.2638 ex 2915 21 00 10 Acetic acid (CAS RN 64-19-7) of a purity by weight of 99 % or more 1.1.-31.12. 1 000 000 tonnes 0 % 09.2679 2915 32 00 Vinyl acetate (CAS RN 108-05-4) 1.1.-31.12. 370 000 tonnes 0 % 09.2728 ex 2915 90 70 85 Ethyl trifluoroacetate (CAS RN 383-63-1) 1.1.-31.12. 400 tonnes 0 % 09.2665 ex 2916 19 95 30 Potassium (E,E)-hexa-2,4-dienoate (CAS RN 24634-61-5) 1.1.-31.12. 8 250 tonnes 0 % 09.2684 ex 2916 39 90 28 2,5-Dimethylphenylacetyl chloride (CAS RN 55312-97-5) 1.1.-31.12. 700 tonnes 0 % 09.2599 ex 2917 11 00 40 Diethyl oxalate (CAS RN 95-92-1) 1.1.-31.12. 500 tonnes 0 % 09.2769 ex 2917 13 90 10 Dimethyl sebacate (CAS RN 106-79-6) 1.1.-31.12. 1 000 tonnes 0 % 09.2634 ex 2917 19 80 40 Dodecanedioic acid (CAS RN 693-23-2), of a purity by weight of more than 98,5 % 1.1.-31.12. 8 000 tonnes 0 % 09.2540 ex 2917 37 00 10 Dimethyl terephthalate (CAS RN 120-61-6) with a purity by weight of 95 % or more 1.1.-31.12. 57 500 tonnes 0 % 09.2017 ex 2918 11 00 20 L-(+)-lactic acid (CAS RN 79-33-4) with a purity by weight of 99 % or more, for use in the manufacturing of: — esters and other derivatives (i.e. products obtained from a chemical reaction with the formation of new intramolecular bonds), or — solutions produced under GMP (Good Manufacturing Practice) conditions to be supplied to the pharmaceutical industry 1.7.-31.12. 27 500 tonnes 0 % 09.2646 ex 2918 29 00 75 Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate (CAS RN 2082-79-3) with: — a sieve passing fraction at a mesh width of 500 μm of more than 99 % by weight, and — a melting point of 49 oC or more, but not more than 54 oC, for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates) (1) 1.1.-31.12. 380 tonnes 0 % 09.2647 ex 2918 29 00 80 Pentaerythritol tetrakis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS RN 6683-19-8) with: — a sieve passing fraction at a mesh width of 250 μm of more than 75 % by weight and at a mesh width of 500 μm of more than 99 % by weight, and

— a melting point of 110 oC or more, but not more than 125 oC, for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates) (1) 1.1.-31.12. 140 tonnes 0 % 09.2975 ex 2918 30 00 10 Benzophenone-3,3′,4,4′-tetracarboxylic dianhydride (CAS RN 2421-28-5) 1.1.-31.12. 1 000 tonnes 0 % 09.2598 ex 2921 19 99 75 Octadecylamine (CAS RN 124-30-1) 1.1.-31.12. 400 tonnes 0 % 09.2649 ex 2921 29 00 60 Bis(2-dimethylaminoethyl)(methyl)amine (CAS RN 3030-47-5) 1.1.-31.12. 1 700 tonnes 0 % 09.2617 ex 2921 42 00 89 4-Fluoro-N-(1-methylethyl)benzeneamine (CAS RN 70441-63-3) 1.1.-31.12. 500 tonnes 0 % 09.2602 ex 2921 51 19 10 O-phenylenediamine (CAS RN 95-54-5) 1.1.-31.12. 1 800 tonnes 0 % 09.2921 ex 2922 19 00 22 2-(dimethylamino)ethyl acrylate (CAS RN 2439-35-2) with a purity by weight of 99 % or more 1.1.-31.12. 14 000 tonnes 0 % 09.2545 ex 2922 29 00 63 Aclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97 % or more 1.1.-31.12. 4 000 tonnes 0 % 09.2575 ex 2923 90 00 87 3-Chloro-2-hydroxypropyl)trimethylammonium chloride (CAS RN 3327-22-8), in the form of an aqueous solution containing by weight 65 % or more but not more than 71 % 3-chloro-2-hydroxypropyl)trimethylammonium chloride 1.1.-31.12. 9 500 tonnes 0 % 09.2922 ex 2923 90 00 88 Aqueous solution containing by weight 78 % or more but not more than 82 % of [2-(acryloyloxy)ethyl]trimethylammonium chloride (CAS RN 44992-01-0) 1.1.-31.12. 10 000 tonnes 0 % 09.2854 ex 2924 19 00 85 3-Iodoprop-2-yn-1-yl butylcarbamate (CAS RN 55406-53-6) 1.1.-31.12. 450 tonnes 0 % 09.2874 ex 2924 29 70 87 Paracetamol (INN) (CAS RN 103-90-2) 1.1.-31.12. 20 000 tonnes 0 % 09.2742 ex 2926 10 00 10 Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of chapter 55 and heading 6815 (1) 1.1.-31.12. 30 000 tonnes 0 % 09.2583 ex 2926 10 00 30 Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of headings 2921 , 2924 , 3903 , 3906 , 3908 , 3911 and 4002 (1) 1.1.-31.12. 20 000 tonnes 0 % 09.2550 ex 2926 90 70 31 Lambda-cyhalothrin (ISO) (CAS RN 91465-08-6) with a purity by weight of 97 % or more 1.1.-31.12. 2 200 tonnes 0 % 09.2856 ex 2926 90 70 84 2-Nitro-4(trifluoromethyl)benzonitrile (CAS RN 778-94-9) 1.1.-31.12. 900 tonnes 0 % 09.2685 ex 2929 90 90 30 Nitroguanidine (CAS RN 556-88-7) 1.1.-31.12. 6 500 tonnes 0 % 09.2597 ex 2930 90 95 94 Bis[3-(triethoxysilyl)propyl]disulphide (CAS RN 56706-10-6) 1.1.-31.12. 6 000 tonnes 0 % 09.2596 ex 2930 90 95 96 2-Chloro-4-(methylsulphonyl)-3-((2,2,2-trifluoroethoxy)methyl) benzoic acid (CAS RN 120100-77-8) 1.1.-31.12. 300 tonnes 0 % 09.2580 ex 2931 90 00 75 Hexadecyltrimethoxysilane (CAS RN 16415-12-6) with a purity by weight of at least 95 %, for use in the manufacture of polyethylene (1) 1.1.-31.12. 165 tonnes 0 % 09.2842 2932 12 00 2-Furaldehyde (furfuraldehyde) 1.1.-31.12. 10 000 tonnes 0 % 09.2024 ex 2932 19 00 85 2-Methyltetrahydrofuran (CAS RN 96-47-9) with a purity by weight of 99 % or more

1.7.-31.12. 750 tonnes 0 % 09.2696 ex 2932 20 90 25 Decan-5-olide (CAS RN 705-86-2) 1.1.-31.12. 6 000 kilograms 0 % 09.2697 ex 2932 20 90 30 Dodecan-5-olide (CAS RN 713-95-1) 1.1.-31.12. 6 000 kilograms 0 % 09.2812 ex 2932 20 90 77 Hexan-6-olide (CAS RN 502-44-3) 1.1.-31.12. 4 000 tonnes 0 % 09.2858 2932 93 00 Piperonal (CAS RN 120-57-0) 1.1.-31.12. 220 tonnes 0 % 09.2541 ex 2933 19 90 73 2,4-Dihydro-2,5-dimethyl-3H-pyrazol-3-one (CAS RN 2749-59-9) with a purity by weight of 99 % or more 1.1.-31.12. 150 tonnes 0 % 09.2839 ex 2933 39 99 09 2-(2-Pyridyl)ethanol (CAS RN 103-74-2) with a purity by weight of 99 % or more 1.1.-31.12. 700 tonnes 0 % 09.2543 ex 2933 39 99 13 Imazamox (ISO) (CAS RN 114311-32-9) with a purity by weight of 95 % or more 1.1.-31.12. 300 tonnes 0 % 09.2546 ex 2933 39 99 46 Fluopicolide (ISO) (CAS RN 239110-15-7) with a content by weight of 97 % or more 1.1.-31.12. 250 tonnes 0 % 09.2025 ex 2933 59 95 82 Ametoctradin (ISO) (CAS RN 865318-97-4) with a purity by weight of 98 % or more 1.7.-31.12. 353 500 kilograms 0 % 09.2547 ex 2933 69 80 13 Metribuzin (ISO) (CAS RN 21087-64-9) with a purity by weight of 93 % or more 1.1.-31.12. 225 tonnes 0 % 09.2860 ex 2933 69 80 30 1,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine (CAS RN 15875-13-5) 1.1.-31.12. 600 tonnes 0 % 09.2566 ex 2933 99 80 05 1,4,7,10-Tetraazacyclododecane (CAS RN 294-90-6) with a purity by weight of 96 % or more 1.1.-31.12. 60 tonnes 0 % 09.2544 ex 2933 99 80 23 Tebuconazole (ISO) (CAS RN 107534-96-3) with a purity by weight of 95 % or more 1.1.-31.12. 150 tonnes 0 % 09.2658 ex 2933 99 80 73 5-(Acetoacetylamino)benzimidazolone (CAS RN 26576-46-5) 1.1.-31.12. 400 tonnes 0 % 09.2549 ex 2934 99 90 16 Difenoconazole (ISO) (CAS RN 119446-68-3) 1.1.-31.12. 1 000 tonnes 0 % 09.2548 ex 2934 99 90 24 Flufenacet (ISO) (CAS RN 142459-58-3) with a purity by weight of 95 % or more 1.1.-31.12. 900 tonnes 0 % 09.2593 ex 2934 99 90 67 5-Chlorothiophene-2-carboxylic acid (CAS RN 24065-33-6) 1.1.-31.12. 45 000 kilograms 0 % 09.2675 ex 2935 90 90 79 4-[[(2-Methoxybenzoyl)amino]sulfonyl]benzoyl chloride (CAS RN 816431-72-8) 1.1.-31.12. 1 000 tonnes 0 % 09.2945 ex 2940 00 00 20 D-Xylose (CAS RN 58-86-6) 1.1.-31.12. 400 tonnes 0 % 09.2686 ex 3204 11 00 75 Colourant C.I. Disperse Yellow 54 (CAS RN 7576-65-0) and preparations based thereon with a colourant C.I. Disperse Yellow 54 content of 99 % or more by weight 1.1.-31.12. 250 tonnes 0 % 09.2676 ex 3204 17 00 14 Preparations based on Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) with a content thereof of 60 % or more but less than 85 % by weight 1.1.-31.12. 50 tonnes 0 % 09.2698 ex 3204 17 00 30 Colourant C.I. Pigment Red 4 (CAS RN 2814-77-9) and preparations based thereon with a colourant C.I. Pigment Red 4 content of 60 % or more by weight 1.1.-31.12. 150 tonnes 0 % 09.2659 ex 3802 90 00 19 Soda flux calcinated diatomaceous earth 1.1.-31.12. 35 000 tonnes 0 % 09.2908 ex 3804 00 00 10 Sodium lignosulphonate (CAS RN 8061-51-6)

1.1.-31.12. 40 000 tonnes 0 % 09.2889 3805 10 90 Sulphate turpentine 1.1.-31.12. 25 000 tonnes 0 % 09.2935 ex 3806 10 00 10 Rosin and resin acids obtained from fresh oleoresins 1.1.-31.12. 280 000 tonnes 0 % 09.2832 ex 3808 92 90 40 Preparation containing 38 % or more but not more than 50 % by weight of pyrithione zinc (INN) (CAS RN 13463-41-7) in an aqueous dispersion 1.1.-31.12. 500 tonnes 0 % 09.2923 ex 3808 94 20 40 Aqueous solution containing by weight: — 10,0 % or more but not more than 11,3 % of 5-chloro-2-methyl-2H-isothiazol-3-one, — 3,0 % or more but not more than 4,1 % of 2-methyl-2H-isothiazol-3-one, — a combined concentration of isothiazolones (CAS RN 55965-84-9) of 13,0 % or more but not more than 15,4 %, — 18 % or more but not more than 22 % of nitrates, calculated as sodium nitrate, and — 5 % or more but not more than 8 % of chlorides, calculated as sodium chloride 1.1.-31.12. 3 000 tonnes 0 % 09.2876 ex 3811 29 00 57 Additives consisting of reaction products of diphenylamine and branched nonenes with: — more than 20 % but not more than 50 % by weight 4-monononyldiphenylamine, and — more than 50 % but not more than 80 % by weight 4,4′-dinonyldiphenylamine, — a total percentage of 2,4-dinonyldiphenylamine and 2,4′-dinonyldiphenylamine of not more than 15 % by weight, used for the manufacture of lubricating oils (1) 1.1.-31.12. 900 tonnes 0 % 09.2927 ex 3811 29 00 83 Additives containing by weight: — 70 % or more of 2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole (CAS RN 89347-09-1), and — 10 % or more of 5-(tert-nonyldithio)- 1,3,4-thiadiazole-2(3H)-thione (CAS RN 97503-12-3), for use in the manufacture of blends of additives for lubricating oils (1) 1.1.-31.12. 500 tonnes 0 % 09.2027 ex 3815 19 90 82 Catalyst consisting of organo-metallic compounds of boron, titanium and aluminium, fixed on a support of silicon dioxide, in the form of powder 1.7.-31.12. 7 800 kilograms 0 % 09.2814 ex 3815 90 90 76 Catalyst consisting of titanium dioxide and tungsten trioxide 1.1.-31.12. 3 000 tonnes 0 % 09.2644 ex 3824 99 92 77 Preparation containing by weight: — 55 % or more but not more than 78 % of dimethyl gluterate (CAS RN 1119-40-0), — 10 % or more but not more than 30 % of dimethyl adipate (CAS RN 627-93-0), and — not more than 35 % of dimethyl succinate (CAS RN 106-65-0) 1.1.-31.12. 10 000 tonnes 0 % 09.2542 ex 3824 99 92 97 Mixture containing bis[3-(triethoxysilyl)propyl]polysulfides (CAS RN 211519-85-6) with a purity by weight of 84 % or more 1.1.-31.12. 2 000 tonnes 0 % 09.2907 ex 3824 99 93 67 Mixture of phytosterols, in the form of powder, containing by weight: — 75 % or more of sterols, — not more than 25 % of stanols, for use in the manufacture of stanols/sterols or stanol/sterol esters (1) 1.1.-31.12. 2 500 tonnes 0 % 09.2568 ex 3824 99 96 91 Mixture, in pellet form, containing by weight: — 49 % or more but not more than 50 % of bis[3-(triethoxysilyl)propyl] polysulphides (CAS RN 211519-85-6), and — 50 % or more but not more than 51 % of carbon black (CAS RN 1333-86-4),

of which 75 % by weight or more pass through a sieve with an aperture of 0,60 mm, but not more than 10 % pass through a sieve with an aperture of 0,25 mm (as determined by the ASTM D1511 method) 1.1.-31.12. 2 100 tonnes 0 % 09.2820 ex 3827 90 00 10 Mixtures containing by weight: — 60 % or more but not more than 90 % of 2-chloropropene (CAS RN 557-98-2), — 8 % or more but not more than 14 % of (Z)-1-chloropropene (CAS RN 16136-84-8), — 5 % or more but not more than 23 % of 2-chloropropane (CAS RN 75-29-6), — not more than 6 % of 3-chloropropene (CAS RN 107-05-1), and — not more than 1 % of ethyl chloride (CAS RN 75-00-3) 1.1.-31.12. 6 000 tonnes 0 % 09.2671 ex 3905 99 90 81 Poly(vinyl butyral)(CAS RN 63148-65-2): — containing by weight 17,5 % or more, but not more than 20 % of hydroxyl groups, and — with a median particle size (D50) of more than 0,6 mm 1.1.-31.12. 12 500 tonnes 0 % 09.2846 ex 3907 40 00 25 Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of not less than 98,5 % by weight, in the form of pellets or granules, with a luminous transmittance of not less than 88,5 %, measured using a test sample with a thickness of 4 mm at a wavelength of λ = 400 nm (according to ISO 13468-2) 1.1.-31.12. 2 000 tonnes 0 % (1)09.2585 ex 3907 61 00 ex 3907 69 00 ex 3907 99 80 20 20 70 Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol 1.1.-31.12. 60 000 tonnes 2 % 09.2855 ex 3910 00 00 10 Liquid poly(methylhydrosiloxane) with terminal trimethylsilyl groups (CAS RN 63148-57-2) with a purity by weight of 99,9 % or more 1.1.-31.12. 1 000 tonnes 0 % 09.2931 ex 3911 90 11 10 Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-1,4-phenyleneisopropylidene-1,4-phenylene) (CAS RN 25135-51-7 and CAS RN 25154-01-2), in one of the forms mentioned in note 6(b) to this chapter containing by weight not more than 20 % of additives 1.1.-31.12. 6 300 tonnes 0 % 09.2723 ex 3911 90 19 35 Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4′-biphenylene) (CAS RNs 25608-64-4 and 25839-81-0) containing by weight not more than 20 % of additives 1.1.-31.12. 5 000 tonnes 0 % 09.2816 ex 3912 11 00 20 Cellulose acetate flakes 1.1.-31.12. 75 000 tonnes 0 % 09.2561 ex 3912 39 85 60 Hypromellose (INN) (CAS RN 9004-65-3), for use in the manufacturing of food supplements or pharmaceuticals (1) 1.1.-31.12. 2 750 tonnes 0 % 09.2573 ex 3913 10 00 20 Sodium alginate extracted from brown seaweed (CAS RN 9005-38-3), with — a loss on drying of not more than 15 % by weight (4h at 105 oC), — a water-insoluble fraction of not more than 2 % by weight, calculated on the dry weight 1.1.-31.12. 2 000 tonnes 0 % 09.2641 ex 3913 90 00 87 Sodium hyaluronate, non sterile, with: — a weight average molecular weight (Mw) of not more than 900 000 , — an endotoxin level of not more than 0,008 Endotoxin units (EU)/mg, — an ethanol content of not more than 1 % by weight, — an isopropanol content of not more than 0,5 % by weight

1.1.-31.12. 300 kilograms 0 % 09.2661 ex 3920 51 00 50 Sheets of polymethylmethacrylate conforming to standards: — EN 4364 (MIL-P-5425E) and DTD5592A, or — EN 4365 (MIL-P-8184) and DTD5592A 1.1.-31.12. 100 tonnes 0 % 09.2645 ex 3921 14 00 20 Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) x 100 cm (± 10 cm) x 40 cm (± 5 cm) 1.1.-31.12. 1 700 tonnes 0 % 09.2572 ex 5205 26 00 ex 5205 27 00 10 10 Raw white single cotton yarn — of combed fibres, — with an average fibre length of 36,5 mm or more, — produced through the compact ring spinning process with pneumatic compression, — with a tear strength of 26,5 cN/tex or more (according to ISO 2062:2009, at a speed of 5 000 mm/min) 1.1.-31.12. 50 000 tonnes 0 % 09.2848 ex 5505 10 10 10 Waste of synthetic fibres (including noils, yarn waste, and garnetted stock) of nylon or other polyamides (PA6 and PA66) 1.1.-31.12. 10 000 tonnes 0 % 09.2721 ex 5906 99 90 20 Woven and laminated rubberised textile fabric with the following characteristics: — with three layers, — one outer layer consists of acrylic fabric, — the other outer layer consists of polyester fabric, — the middle layer consists of chlorobutyl rubber, — the middle layer has a weight of 452 g/m2 or more but not more than 569 g/m2, — the textile fabric has a total weight of 952 g/m2 or more but not more than 1 159 g/m2, and — the textile fabric has a total thickness of 0,8 mm or more but not more than 4 mm, used for the manufacture of the retractable roof of motor vehicles (1) 1.1.-31.12. 375 000 square meters 0 % 09.2628 ex 7019 66 00 10 Glass web woven from glass fibre coated in plastic, of a weight of 120 g/m2(± 10 g/m2), of a type used in rolling insect screens with fixed frames 1.1.-31.12. 3 000 000 square meters 0 % 09.2652 ex 7410 11 00 50 Refined copper foil and strips, electrolytically manufactured, with a thickness of 0,015 mm or more but not more than 0,150 mm, used for the manufacture of laminates for Printed Circuit Boards and of Printed Circuit Boards in the printed circuit board industry (1) 1.1.-31.12. 1 020 tonnes 0 % 09.2662 ex 7410 21 00 55 Plates: — consisting of at least one layer of fibreglass fabric impregnated with epoxide resin, — covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, — with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, — with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, — with a comparative tracking index (CTI) of 600 or more 1.1.-31.12. 108 000 square meters 0 % 09.2795 7601 20 30 7601 20 40 Slabs and billets of unwrought aluminium alloys 1.1.-31.12. 573 000 tonnes 4 % 09.2835 ex 7604 29 10 30 Aluminium alloy rods with a diameter of 300,1 mm or more, but not more than 533,4 mm 1.1.-31.12. 1 000 tonnes 0 % 09.2736 ex 7607 11 90 ex 7607 11 90 ex 7607 11 90 ex 7607 11 90 75 77 78

79 Aluminium and magnesium alloy strip or foil: — of an alloy conforming to standards 5182-H19 or 5052-H19, — in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm, — of a thickness (tolerance -0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm, — of a width (tolerance ±0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, — having a camber tolerance of not more than 0,4 mm/750 mm, — of a flatness measurement: I-unit ±4, — having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, and — of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %, for use in the manufacture of slats for blinds (1) 1.1.-31.12. 600 tonnes 0 % 09.2722 8104 11 00 Unwrought magnesium, containing at least 99,8 % by weight of magnesium 1.1.-31.12. 120 000 tonnes 0 % 09.2840 ex 8104 30 00 20 Magnesium powder: — of purity by weight of 98 % or more, but not more than 99,5 %, and — with a particle size of 0,2 mm or more but not more than 0,8 mm 1.1.-31.12. 2 000 tonnes 0 % 09.2629 ex 8302 49 00 91 Aluminium telescopic handle for use in the manufacture of luggage (1) 1.1.-31.12. 1 500 000 pieces 0 % 09.2029 ex 8409 91 00 15 Cylinder head blank for a four cylinder engine with 10 cores, made of aluminium alloy EN AC-45500, with: — no other components, — a hardness of 52 HRB or more, — casting defects size of not more than 0,4 mm and not more than 10 defects per cm2, — a dendrite arm space in combustion chamber of not more than 25 μm, — a double deck water jacket design, — a weight of 14 kg or more but not more than 19 kg, — a length of 506 mm or more but not more than 510 mm, — a height of 282 mm or more but not more than 286 mm and — a width of 143,7 mm or more but not more than 144,3 mm 1.7.-31.12. 100 000 pieces 0 % 09.2031 ex 8411 99 00 45 Turbine ring segments, guide and rotor blades as parts of a stationary gas turbine for power generation or as a mechanical drive — made of nickel-based superalloys, — for an operating temperature of more than 600 K but not more than 1 600 K, — with a length of not more than 500 mm, — with a width of not more than 900 mm, — with a height of not more than 1 300 mm 1.7.-31.12. 615 000 kilograms 0 % 09.2720 ex 8413 91 00 50 Pump head for two cylinder high pressure pump made of forged steel, with: — milled threaded fittings with a diameter of 10 mm or more but not more than 36,8 mm, and — drilled fuel channels with a diameter of 3,5 mm or more but not more than 10 mm, of a kind used in diesel injection systems 1.1.-31.12. 65 000 pieces 0 % 09.2569 ex 8414 90 00 80 Turbocharger wheel housing of cast aluminium alloy or cast iron: — with a heat resistance up to 400 oC, — with a hole of 30 mm or more but not more than 300 mm for the insertion of the compressor wheel, for use in the automotive industry (1) 1.1.-31.12. 4 000 000 pieces 0 % 09.2570 ex 8482 91 90 10 Rollers with a logarithmic profile and a diameter of 25 mm or more but not more than 70 mm or balls with a diameter of 30 mm but not more than 100 mm,

— made of 100Cr6 steel or 100CrMnSi6-4 steel (ISO 3290), — with a deviation of 0,5 mm or less as determined with the FBHmethod for use in wind turbine industry (1) 1.1.-31.12. 600 000 pieces 0 % 09.2562 ex 8482 99 00 30 Brass cages with the following characteristics: — continuously or centrifugally cast, — turned, — containing by weight 35 % or more, but not more than 38 % of zinc, — containing by weight 0,75 % or more, but not more than 1,25 % of lead, — containing by weight 1,0 % or more, but not more than 1,4 % of aluminium, and — with a tensile strength of 415 Pa or more, of a kind used for the manufacture of ball bearings 1.1.-31.12. 550 000 pieces 0 % 09.2557 ex 8482 99 00 60 Inner or outer rings made of steel, not hardened or not grinded, outer ring with internal raceway(s), inner ring with external raceway(s), with external diameters of: — 14 mm or more but not more than 77 mm for the inner ring, — 26 mm or more but not more than 101 mm for the outer ring, for use in the manufacture of bearings (1) 1.1.-31.12. 2 000 pieces 0 % 09.2552 ex 8482 99 00 70 Male and female parts of cages, — made of flat-rolled steel, — with a diameter of 14,5 mm or more but not more than 420 mm, — the male part including rivets, — the female part including holes, used for manufacturing of deep grove ball bearings (1) 1.1.-31.12. 1 221 tonnes 0 % 09.2553 ex 8482 99 00 80 Punched cages of various diameters, — made of flat rolled steel, — with tensile strength of 270 MPa or more, for the production of tapered roller bearings (1) 1.1.-31.12. 8 000 000 pieces 0 % 09.2560 ex 8501 31 00 85 Power transmission device for controlling the output of exhaust gas turbochargers, consisting of: — a DC motor of an output not exceeding 600 W, — for usage with a supply voltage of 8 V or more but no more than 48 V, — with motor connection (plug-in connection), — whether or not with position sensor, — whether or not with integrated control and power electronics, — whether or not with spring mechanism for resetting the lever, — built in a housing with reduction gear and lever attached to the motor drive shaft, or — built in a housing with threads integrated into the rotor of the motor for linear movement of the integrated control rod 1.1.-31.12. 650 000 pieces 0 % 09.2559 ex 8501 40 20 ex 8501 40 80 70 70 Electric AC motor, single-phase, whether or not with commutator — with a nominal output of 180 W or more, — with an input power of 150 W or more but not more than 2 700 W, — with an external diameter of more than 44,8 but not more than 135,2 mm, — with a rated speed of more than 10 000 rpm but not more than 50 000 rpm, — whether or not equipped with air-inducting ventilator, — whether or not with mechanical device (pinion, screws, gear connection etc.) on the shaft, for use in the manufacture of domestic appliances (1) 1.1.-31.12. 2 000 000 pieces 0 % 09.2554 ex 8505 11 10 ex 8505 11 90 ex 8505 19 90 74 74 74 Articles in shape of flat bars, arched bars, quarter sleeves or trapezoid whether or not arched, rounded corners or oblique sides made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy,

— whether or not overmolded with polymers, — whether or not coated or passivated with a surface treatment, with: — a length of 5 mm or more, but not more than 60 mm, — a width of 5 mm or more, but not more than 40 mm, — a thickness of 3 mm or more, but not more than 15 mm, intended to become permanent magnets after magnetisation 1.1.-31.12. 460 tonnes 0 % 09.2555 ex 8505 11 10 76 Articles of an alloy of neodymium, or an alloy of samarium, — whether or not coated or passivated with a surface treatment, — whether or not covered with zinc, — in the shape of rectangles, with: — a length of 13,8 mm or more but not more than 45,2 mm, — a width of 7,8 mm or more but not more than 25,2 mm, — a height of 1,3 mm or more but not more than 4,7 mm, intended to become permanent magnets after magnetisation 1.1.-31.12. 350 tonnes 0 % 09.2556 ex 8505 11 10 77 Article of an alloy of neodymium, in the form of arched rectangles, whether or not coated or passivated with a surface treatment, with: — a width of 9,1 mm or more but not more than 10,5 mm, — a length of 20 mm or more but not more than 30,1 mm, intended to become permanent magnets after magnetization 1.1.-31.12. 50 tonnes 0 % 09.2574 ex 8537 10 91 73 Multifunctional device (instrument cluster) with: — curved TFT LCD display (radius 750 mm) with touch-sensitive surfaces, — microprocessors and memory chips, — acoustic module and loudspeaker, — connections for CAN, 3 x LIN bus, LVDS and Ethernet, — for operating various functions (e.g. chassis, lighting) and — for situation-related display of vehicle and navigation data (e.g. speed, odometer, charge level of the drive battery), for use in the manufacture of passenger cars powered solely by an electric motor covered by HS subheading 8703 80 (1) 1.1.-31.12. 66 900 pieces 0 % 09.2558 ex 8543 70 90 87 An electronic sound generator, creating an analog signal for a device producing the sound of an engine, containing: — a printed circuit board with a microprocessor and a sound amplifier, — a connector, — a plastic housing, — with or without a metal holder, for use in the manufacture of goods of Chapter 87 (1) 1.1.-31.12. 30 000 pieces 0 % 09.2910 ex 8708 99 97 75 Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 87 (1) 1.1.-31.12. 200 000 pieces 0 % 09.2668 ex 8714 91 10 ex 8714 91 10 ex 8714 91 10 21 31 75 Bicycle frame, constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including electric bicycles) (1) 1.1.-31.12. 600 000 pieces 0 % 09.2564 ex 8714 91 10 ex 8714 91 10 ex 8714 91 10 25 35 77 Frame, constructed from aluminium or aluminium and carbon fibres and artificial resin, for the use in the manufacture of bicycles (including electric bicycles) (1) 1.1.-31.12. 9 600 000 pieces 0 % 09.2579 ex 9029 20 31 ex 9029 90 00 40 40 Clustered instrument panel with: — stepping motors, — analog pointers and dials,

— or without microprocessor control board, — or without LED indicators or LCD display, — showing at least: — speed, — engine revolutions, — engine temperature, — the fuel level, — communicating via CAN-BUS and/or K-LINE protocols, for use in the manufacture of goods of Chapter 87 (1) 1.1.-31.12. 160 000 pieces 0 % (1) Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013. (2) However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings. (1) TARIC codes ex 3907610020 and ex 3907690020 shall apply from 1 July 2025.’. ELI: http://data.europa.eu/eli/reg/2025/1292/oj ISSN 1977-0677 (electronic edition)