1Council Regulation (EU) 2025/2614 of 12 December 2025 amending Regulation (EU) 2021/2283 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products

Council Regulation (EU) 2025/2614 of 12 December 2025 amending Regulation (EU) 2021/2283 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products THE COUNCIL OF THE EUROPEAN UNION, Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof, Having regard to the proposal from the European Commission, Whereas: (1) In order to ensure a sufficient supply of certain agricultural and industrial products which are produced in insufficient quantities in the Union and thereby avoid any disturbances on the market for those products, autonomous tariff quotas of the Union (quotas) were opened by Council Regulation (EU) 2021/2283 Council Regulation (EU) 2021/2283 of 20 December 2021 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products, and repealing Regulation (EU) No 1388/2013 (OJ L 458, 22.12.2021, p. 33, ELI: http://data.europa.eu/eli/reg/2021/2283/oj). . Within the quotas, products can be imported into the Union at reduced or zero duty rates. (2) As it is in the Union’s interest to ensure an adequate supply of certain industrial products and having regard to the fact that identical, equivalent or substitute products are not produced in sufficient quantities within the Union, it is necessary to open quotas with order numbers 09.2032 and 09.2035 at zero duty rates for appropriate quantities of those products. (3) As the scope of the quotas with order numbers 09.2033 and 09.2034 has become inadequate to fulfil the needs of economic operators in the Union, the description of the products covered by those quota order numbers should be modified. Additionally, TARIC codes for the products with those quota order numbers should be modified. (4) For the quota with order number 09.2728, the classification of that product in Annex I to Council Regulation (EEC) No 2658/87 Council Regulation (EEC) No 2658/87 of 23 July 1987 on the tariff and statistical nomenclature and on the Common Customs Tariff (OJ L 256, 7.9.1987, p. 1, ELI: http://data.europa.eu/eli/reg/1987/2658/oj). (the Combined Nomenclature), has changed. Therefore, the applicable Combined Nomenclature code for that quota should be modified. (5) As is it in the Union’s interest to ensure an adequate supply of a certain industrial product, the volume of the quota with order number 09.2551 should be increased. (6) The quotas with order numbers 09.2010, 09.2017, 09.2025, 09.2027, 09.2029 and 09.2031 were initially opened for a period of six months. That period should be extended and the quota volumes concerned should be adapted on an annual basis as it is still in the Union’s interest to maintain those quotas. (7) For the quota with order number 09.2551, the quota should be opened for a period of six months only in order to take into account the potential evolution of the production of those products in the Union. (8) As it is no longer in the Union’s interest to maintain the quotas with order numbers 09.2742, 09.2583, 09.2024, 09.2858, 09.2686, 09.2676, 09.2698, 09.2832, 09.2644, 09.2795, 09.2835 and 09.2736, those quotas should be closed.

(9) Regulation (EU) 2021/2283 should therefore be amended accordingly. (10) In order to avoid any interruption in the application of the quota scheme and to comply with the guidelines set out in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the quotas for the products concerned should apply from 1 January 2026. This Regulation should therefore enter into force as a matter of urgency, HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) 2021/2283 is replaced by the text set out in the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union. It shall apply from 1 January 2026. This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 12 December 2025. For the Council The President S. Lose

Annex

ANNEX

Annex

ANNEX Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013. However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings.. Order numberCN codeTARICDescriptionQuota periodQuota volumeQuota duty rate09.2010ex2912290075Cyclohex-3-ene-1-carbaldehyde (CAS RN 100-50-5) with a purity by weight of 98 % or more1.1.-31.12.155000 kilograms0 %09.2017ex2918110020 L-(+)-lactic acid (CAS RN 79-33-4) with a purity by weight of 99 % or more, for use in the manufacturing of: esters and other derivatives (i.e. products obtained from a chemical reaction with the formation of new intramolecular bonds), or solutions produced under GMP (Good Manufacturing Practice) conditions to be supplied to the pharmaceutical industry 1.1.-31.12.55000 tonnes0 %09.2025ex2933599582Ametoctradin (ISO) (CAS RN 865318-97-4) with a purity by weight of 98 % or more1.1.-31.12.353500 kilograms0 %09.2027ex3815199082Catalyst consisting of organo-metallic compounds of boron, titanium and aluminium, fixed on a support of silicon dioxide, in the form of powder1.1.-31.12.15600 kilograms0 % 09.2029ex8409910015 Cylinder head blank for a four cylinder engine with 10 cores, made of aluminium alloy EN AC-45500, with: no other components, a hardness of 52 HRB or more, casting defects size of not more than 0,4 mm and not more than 10 defects per cm2, a dendrite arm space in combustion chamber of not more than 25 μm, a double deck water jacket design, a weight of 14 kg or more but not more than 19 kg, a length of 506 mm or more but not more than 510 mm, a height of 282 mm or more but not more than 286 mm and a width of 143,7 mm or more but not more than 144,3 mm 1.1.-31.12.200000 pieces0 %09.2031ex8411990045 Turbine ring segments, guide and rotor blades as parts of a stationary gas turbine for power generation or as a mechanical drive made of nickel-based superalloys,

for an operating temperature of more than 600 K but not more than 1600 K, with a length of not more than 500 mm, with a width of not more than 900 mm, with a height of not more than 1300 mm 1.1.-31.12.615000 kilograms0 %09.2032ex2920290035Fosetyl-sodium (ISO)(CAS RN 39148-16-8) in the form of an aqueous solution, containing by weight 39 % or more, but not more than 41 % of fosetyl-sodium1.1.-31.12.521 tonnes0 % 09.2033ex3811290079 Additives, consisting of the reaction products of 1,3,4-thiadiazolidine-2,5-dithione with hydrogen peroxide and tert-nonanethiol, containing by weight: 70 % or more of 2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole (CAS RN 89347-09-1), and 10 % or more of 5-(tert-nonyldithio)- 1,3,4-thiadiazole-2(3H)-thione (CAS RN 97503-12-3), for use in the manufacture of blends of additives for lubricating oils 1.1.-31.12.500 tonnes0 %09.2034 ex90292031 ex90299000 50 50 Clustered instrument panel, communicating via CAN-BUS and/or K-LINE protocols, with: or without stepping motors, analogue or digital pointers and dials, or without microprocessor control board, or without LED indicators or LCD display, showing at least: speed, engine revolutions, engine temperature, fuel level, for use in the manufacture of goods of Chapter 87 1.1.-31.12.160000 pieces0 % 09.2035ex8409910083 Connecting rod for connecting pistons to the crankshaft of a passenger car engine: made of an alloy containing 96 % steel and the remainder being titanium, vanadium, aluminium, chromium, nickel, copper, phosphorus, silicon, sulphur, manganese, with two connecting rod bolts, with a bushing, of a length of 120 mm or more but not more than 160 mm, with a surface roughness corresponding to ISO 4287-1997, for use in the manufacture of spark ignition motor vehicle engines 1.1.-31.12.570000 pieces0 %09.2540ex2917370010Dimethyl terephthalate (CAS RN 120-61-6) with a purity by weight of 95 % or more1.1.-31.12.57500 tonnes0 %09.2541ex29331990732,4-Dihydro-2,5-dimethyl-3H-pyrazol-3-one (CAS RN 2749-59-9) with a purity by weight of 99 % or more1.1.-31.12.150 tonnes0 %09.2542ex3824999297Mixture containing bis[3-(triethoxysilyl)propyl]polysulfides (CAS RN 211519-85-6) with a purity by weight of 84 % or more1.1.-31.12.2000 tonnes0 %09.2543ex2933399913Imazamox (ISO) (CAS RN 114311-32-9) with a purity by weight of 95 % or more1.1.-31.12.300 tonnes0 %09.2544ex2933998023Tebuconazole (ISO) (CAS RN 107534-96-3) with a purity by weight of 95 % or more1.1.-31.12.150 tonnes0 %09.2545ex2922290063Aclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97 % or more1.1.-31.12.4000 tonnes0 %09.2546ex2933399946Fluopicolide (ISO) (CAS RN 239110-15-7) with a content by weight of 97 % or more1.1.-31.12.250 tonnes0 % 09.2547ex2933698013Metribuzin (ISO) (CAS RN 21087-64-9) with a purity by weight of 93 % or more1.1.-31.12.225 tonnes0 %09.2548ex2934999024Flufenacet (ISO) (CAS RN 142459-58-3) with a purity by weight of 95 % or more1.1.-31.12.900 tonnes0 %09.2549ex2934999016Difenoconazole (ISO) (CAS RN 119446-68-3)1.1.-31.12.1000 tonnes0 %09.2550ex2926907031Lambda-cyhalothrin (ISO) (CAS RN 91465-08-6) with a purity by weight of 97 % or more1.1.-31.12.2200 tonnes0 %09.2551ex2905299040Prop-2-yn-1-ol (CAS RN 107-19-7) with a purity by weight of 99 % or more1.1.-30.6.150 tonnes0 %09.2552ex8482990070

Male and female parts of cages, made of flat-rolled steel, with a diameter of 14,5 mm or more but not more than 420 mm, the male part including rivets, the female part including holes, used for manufacturing of deep grove ball bearings 1.1.-31.12.1221 tonnes0 %09.2553ex8482990080 Punched cages of various diameters, made of flat rolled steel, with tensile strength of 270 MPa or more, for the production of tapered roller bearings 1.1.-31.12.8000000 pieces0 % 09.2554 ex85051110 ex85051190 ex85051990 74 74 74 Articles in shape of flat bars, arched bars, quarter sleeves or trapezoid whether or not arched, rounded corners or oblique sides made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy, whether or not overmolded with polymers, whether or not coated or passivated with a surface treatment, with: a length of 5 mm or more, but not more than 60 mm, a width of 5 mm or more, but not more than 40 mm, a thickness of 3 mm or more, but not more than 15 mm, intended to become permanent magnets after magnetisation 1.1.-31.12.460 tonnes0 %09.2555ex8505111076 Articles of an alloy of neodymium, or an alloy of samarium, whether or not coated or passivated with a surface treatment, whether or not covered with zinc, in the shape of rectangles, with: a length of 13,8 mm or more but not more than 45,2 mm, a width of 7,8 mm or more but not more than 25,2 mm, a height of 1,3 mm or more but not more than 4,7 mm, intended to become permanent magnets after magnetisation 1.1.-31.12.350 tonnes0 % 09.2556ex8505111077 Article of an alloy of neodymium, in the form of arched rectangles, whether or not coated or passivated with a surface treatment, with: a width of 9,1 mm or more but not more than 10,5 mm, a length of 20 mm or more but not more than 30,1 mm, intended to become permanent magnets after magnetization 1.1.-31.12.50 tonnes0 %09.2557ex8482990060 Inner or outer rings made of steel, not hardened or not grinded, outer ring with internal raceway(s), inner ring with external raceway(s), with external diameters of: 14 mm or more but not more than 77 mm for the inner ring, 26 mm or more but not more than 101 mm for the outer ring, for use in the manufacture of bearings 1.1.-31.12.2000 pieces0 %09.2558ex8543709087 An electronic sound generator, creating an analogue signal for a device producing the sound of an engine, containing: a printed circuit board with a microprocessor and a sound amplifier, a connector, a plastic housing, with or without a metal holder, for use in the manufacture of goods of Chapter 87 1.1.-31.12.30000 pieces0 % 09.2559 ex85014020 ex85014080 70 70 Electric AC motor, single-phase, whether or not with commutator with a nominal output of 180 W or more, with an input power of 150 W or more but not more than 2700 W, with an external diameter of more than 44,8 but not more than 135,2 mm, with a rated speed of more than 10000 rpm but not more than 50000 rpm, whether or not equipped with air-inducting ventilator, whether or not with mechanical device (pinion, screws, gear connection etc.) on the shaft,

for use in the manufacture of domestic appliances 1.1.-31.12.2000000 pieces0 %09.2560ex8501310085 Power transmission device for controlling the output of exhaust gas turbochargers, consisting of: a DC motor of an output not exceeding 600 W, for usage with a supply voltage of 8 V or more but no more than 48 V, with motor connection (plug-in connection), whether or not with position sensor, whether or not with integrated control and power electronics, whether or not with spring mechanism for resetting the lever, built in a housing with reduction gear and lever attached to the motor drive shaft, or built in a housing with threads integrated into the rotor of the motor for linear movement of the integrated control rod 1.1.-31.12.650000 pieces0 % 09.2561ex3912398560Hypromellose (INN) (CAS RN 9004-65-3), for use in the manufacturing of food supplements or pharmaceuticals1.1.-31.12.2750 tonnes0 %09.2562ex8482990030 Brass cages with the following characteristics: continuously or centrifugally cast, turned, containing by weight 35 % or more, but not more than 38 % of zinc, containing by weight 0,75 % or more, but not more than 1,25 % of lead, containing by weight 1,0 % or more, but not more than 1,4 % of aluminium, and with a tensile strength of 415 Pa or more, of a kind used for the manufacture of ball bearings 1.1.-31.12.550000 pieces0 %09.2564 ex87149110 ex87149110 ex87149110 25 35 77 Frame, constructed from aluminium or aluminium and carbon fibres and artificial resin, for the use in the manufacture of bicycles (including electric bicycles)1.1.-31.12.9600000 pieces0 %09.2565ex2914199070Calcium acetylacetonate (CAS RN 19372-44-2) with a purity by weight of 95 % or more1.1.-31.12.400 tonnes0 %09.2566ex29339980051,4,7,10-Tetraazacyclododecane (CAS RN 294-90-6) with a purity by weight of 96 % or more1.1.-31.12.60 tonnes0 %09.2567ex2903220010Trichloroethylene (CAS RN 79-01-6) with a purity by weight of 99 % or more1.1.-31.12.11885000 kilograms0 % 09.2568ex3824999691 Mixture, in pellet form, containing by weight: 49 % or more but not more than 50 % of bis[3-(triethoxysilyl)propyl] polysulphides (CAS RN 211519-85-6), and 50 % or more but not more than 51 % of carbon black (CAS RN 1333-86-4), of which 75 % by weight or more pass through a sieve with an aperture of 0,60 mm, but not more than 10 % pass through a sieve with an aperture of 0,25 mm (as determined by the ASTM D1511 method) 1.1.-31.12.2100 tonnes0 %09.2569ex8414900080 Turbocharger wheel housing of cast aluminium alloy or cast iron: with a heat resistance up to 400 oC, with a hole of 30 mm or more but not more than 300 mm for the insertion of the compressor wheel, for use in the automotive industry 1.1.-31.12.4000000 pieces0 %09.2570ex8482919010 Rollers with a logarithmic profile and a diameter of 25 mm or more but not more than 70 mm or balls with a diameter of 30 mm but not more than 100 mm, made of 100Cr6 steel or 100CrMnSi6-4 steel (ISO 3290), with a deviation of 0,5 mm or less as determined with the FBHmethod

for use in wind turbine industry 1.1.-31.12.600000 pieces0 % 09.2572 ex52052600 ex52052700 10 10 Raw white single cotton yarn of combed fibres, with an average fibre length of 36,5 mm or more, produced through the compact ring spinning process with pneumatic compression, with a tear strength of 26,5 cN/tex or more (according to ISO 2062:2009, at a speed of 5000 mm/min) 1.1.-31.12.50000 tonnes0 %09.2573ex3913100020 Sodium alginate extracted from brown seaweed (CAS RN 9005-38-3), with a loss on drying of not more than 15 % by weight (4h at 105 oC), a water-insoluble fraction of not more than 2 % by weight, calculated on the dry weight 1.1.-31.12.2000 tonnes0 %09.2574ex8537109173 Multifunctional device (instrument cluster) with: curved TFT LCD display (radius 750 mm) with touch-sensitive surfaces, microprocessors and memory chips, acoustic module and loudspeaker, connections for CAN, 3 x LIN bus, LVDS and Ethernet, for operating various functions (e.g. chassis, lighting) and for situation-related display of vehicle and navigation data (e.g. speed, odometer, charge level of the drive battery), for use in the manufacture of passenger cars powered solely by an electric motor covered by HS subheading 870380 1.1.-31.12.66900 pieces0 % 09.2575ex29239000873-Chloro-2-hydroxypropyl)trimethylammonium chloride (CAS RN 3327-22-8), in the form of an aqueous solution containing by weight 65 % or more but not more than 71 % 3-chloro-2-hydroxypropyl)trimethylammonium chloride1.1.-31.12.9500 tonnes0 %09.2578ex2811198050Sulphamidic acid (CAS RN 5329-14-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of the anti-caking agent silicon dioxide (CAS RN 112926-00-8)1.1.-31.12.27000 tonnes0 %09.2580ex2931900075Hexadecyltrimethoxysilane (CAS RN 16415-12-6) with a purity by weight of at least 95 %, for use in the manufacture of polyethylene1.1.-31.12.165 tonnes0 %09.2585 ex39076100 ex39076900 ex39079980 20 20 70 Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol1.1.-31.12.60000 tonnes2 %09.2593ex29349990675-Chlorothiophene-2-carboxylic acid (CAS RN 24065-33-6)1.1.-31.12.45000 kilograms0 %09.2596ex29309095962-Chloro-4-(methylsulphonyl)-3-((2,2,2-trifluoroethoxy)methyl) benzoic acid (CAS RN 120100-77-8)1.1.-31.12.300 tonnes0 %09.2597ex2930909594Bis[3-(triethoxysilyl)propyl]disulphide (CAS RN 56706-10-6)1.1.-31.12.6000 tonnes0 %09.2598ex2921199975Octadecylamine (CAS RN 124-30-1)1.1.-31.12.400 tonnes0 %09.2599ex2917110040Diethyl oxalate (CAS RN 95-92-1)1.1.-31.12.500 tonnes0 %09.2600ex2712903910Slack wax (CAS RN 64742-61-6)1.1.-31.12.100000 tonnes0 % 09.2602ex2921511910O-phenylenediamine (CAS RN 95-54-5)1.1.-31.12.1800 tonnes0 %09.2617ex29214200894-Fluoro-N-(1-methylethyl)benzeneamine (CAS RN 70441-63-3)1.1.-31.12.500 tonnes0 %09.2628ex7019660010Glass web woven from glass fibre coated in plastic, of a weight of 120 g/m2 (± 10 g/m2), of a type used in rolling insect screens with fixed frames1.1.-31.12.3000000 square meters0 %09.2629ex8302490091Aluminium telescopic handle for use in the manufacture of luggage1.1.-31.12.1500000 pieces0 %09.2634ex2917198040Dodecanedioic acid (CAS RN 693-23-2), of a purity by weight of more than 98,5 %1.1.-31.12.8000 tonnes0 %09.2638ex2915210010Acetic acid (CAS RN 64-19-7) of a purity by weight of 99 % or more1.1.-31.12.1000000 tonnes0 %09.2641ex3913900087

Sodium hyaluronate, non sterile, with: a weight average molecular weight (Mw) of not more than 900000, an endotoxin level of not more than 0,008 Endotoxin units (EU)/mg, an ethanol content of not more than 1 % by weight, an isopropanol content of not more than 0,5 % by weight 1.1.-31.12.300 kilograms0 %09.2645ex3921140020Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) x 100 cm (± 10 cm) x 40 cm (± 5 cm)1.1.-31.12.1700 tonnes0 % 09.2646ex2918290075 Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate (CAS RN 2082-79-3) with: a sieve passing fraction at a mesh width of 500 μm of more than 99 % by weight, and a melting point of 49 oC or more, but not more than 54 oC, for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates) 1.1.-31.12.380 tonnes0 %09.2647ex2918290080 Pentaerythritol tetrakis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS RN 6683-19-8) with: a sieve passing fraction at a mesh width of 250 μm of more than 75 % by weight and at a mesh width of 500 μm of more than 99 % by weight, and a melting point of 110 oC or more, but not more than 125 oC, for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates) 1.1.-31.12.140 tonnes0 %09.2649ex2921290060Bis(2-dimethylaminoethyl)(methyl)amine (CAS RN 3030-47-5)1.1.-31.12.1700 tonnes0 %09.2652ex7410110050Refined copper foil and strips, electrolytically manufactured, with a thickness of 0,015 mm or more but not more than 0,150 mm, used for the manufacture of laminates for Printed Circuit Boards and of Printed Circuit Boards in the printed circuit board industry1.1.-31.12.1020 tonnes0 %09.2658ex29339980735-(Acetoacetylamino)benzimidazolone (CAS RN 26576-46-5)1.1.-31.12.400 tonnes0 %09.2659ex3802900019Soda flux calcinated diatomaceous earth1.1.-31.12.35000 tonnes0 % 09.2661ex3920510050 Sheets of polymethylmethacrylate conforming to standards: EN 4364 (MIL-P-5425E) and DTD5592A, or EN 4365 (MIL-P-8184) and DTD5592A 1.1.-31.12.100 tonnes0 %09.2662ex7410210055 Plates: consisting of at least one layer of fibreglass fabric impregnated with epoxide resin, covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, with a comparative tracking index (CTI) of 600 or more 1.1.-31.12.108000 square meters0 %09.2665ex2916199530Potassium (E,E)-hexa-2,4-dienoate (CAS RN 24634-61-5)1.1.-31.12.8250 tonnes0 %09.2668 ex87149110 ex87149110 ex87149110 21 31 75 Bicycle frame, constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including electric bicycles)1.1.-31.12.600000 pieces0 %09.2671ex3905999081 Poly(vinyl butyral)(CAS RN 63148-65-2):

containing by weight 17,5 % or more, but not more than 20 % of hydroxyl groups, and with a median particle size (D50) of more than 0,6 mm 1.1.-31.12.12500 tonnes0 % 09.2675ex29359090794-[[(2-Methoxybenzoyl)amino]sulfonyl]benzoyl chloride (CAS RN 816431-72-8)1.1.-31.12.1000 tonnes0 %09.267929153200Vinyl acetate (CAS RN 108-05-4)1.1.-31.12.370000 tonnes0 %09.2684ex29163990282,5-Dimethylphenylacetyl chloride (CAS RN 55312-97-5)1.1.-31.12.700 tonnes0 %09.2685ex2929909030Nitroguanidine (CAS RN 556-88-7)1.1.-31.12.6500 tonnes0 %09.2696ex2932209025Decan-5-olide (CAS RN 705-86-2)1.1.-31.12.6000 kilograms0 %09.2697ex2932209030Dodecan-5-olide (CAS RN 713-95-1)1.1.-31.12.6000 kilograms0 %09.2700ex2905120010Propan-1-ol (propyl alcohol) (CAS RN 71-23-8)1.1.-31.12.15000 tonnes0 %09.2704ex29094980202,2,2',2'-Tetrakis(hydroxymethyl)-3,3'-oxydipropan-1-ol (CAS RN 126-58-9)1.1.-31.12.500 tonnes0 %09.2720ex8413910050 Pump head for two cylinder high pressure pump made of forged steel, with: milled threaded fittings with a diameter of 10 mm or more but not more than 36,8 mm, and drilled fuel channels with a diameter of 3,5 mm or more but not more than 10 mm, of a kind used in diesel injection systems 1.1.-31.12.65000 pieces0 % 09.2721ex5906999020 Woven and laminated rubberised textile fabric with the following characteristics: with three layers, one outer layer consists of acrylic fabric, the other outer layer consists of polyester fabric, the middle layer consists of chlorobutyl rubber, the middle layer has a weight of 452 g/m2 or more but not more than 569 g/m2, the textile fabric has a total weight of 952 g/m2 or more but not more than 1159 g/m2, and the textile fabric has a total thickness of 0,8 mm or more but not more than 4 mm, used for the manufacture of the retractable roof of motor vehicles 1.1.-31.12.375000 square meters0 %09.272281041100Unwrought magnesium, containing at least 99,8 % by weight of magnesium1.1.-31.12.120000 tonnes0 %09.2723ex3911901935Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4'-biphenylene) (CAS RNs 25608-64-4 and 25839-81-0) containing by weight not more than 20 % of additives1.1.-31.12.5000 tonnes0 %09.2728ex2915909085Ethyl trifluoroacetate (CAS RN 383-63-1)1.1.-31.12.400 tonnes0 %09.2769ex2917139010Dimethyl sebacate (CAS RN 106-79-6)1.1.-31.12.1000 tonnes0 %09.2806ex2825904030Tungsten trioxide, including blue tungsten oxide (CAS RN 1314-35-8 or CAS RN 39318-18-8)1.1.-31.12.12000 tonnes0 % 09.2812ex2932209077Hexan-6-olide (CAS RN 502-44-3)1.1.-31.12.4000 tonnes0 %09.2814ex3815909076Catalyst consisting of titanium dioxide and tungsten trioxide1.1.-31.12.3000 tonnes0 %09.2816ex3912110020Cellulose acetate flakes1.1.-31.12.75000 tonnes0 %09.2819ex2833250030Copper hydroxide sulfate (Cu4(OH)6(SO4)), hydrate (CAS RN 12527-76-3) with a purity by weight of 98 % or more1.1.-31.12.240000 kilograms0 %09.2820ex3827900010 Mixtures containing by weight: 60 % or more but not more than 90 % of 2-chloropropene (CAS RN 557-98-2), 8 % or more but not more than 14 % of (Z)-1-chloropropene (CAS RN 16136-84-8),

5 % or more but not more than 23 % of 2-chloropropane (CAS RN 75-29-6), not more than 6 % of 3-chloropropene (CAS RN 107-05-1), and not more than 1 % of ethyl chloride (CAS RN 75-00-3) 1.1.-31.12.6000 tonnes0 %09.282827122090Paraffin wax containing by weight less than 0,75 % of oil1.1.-31.12.180000 tonnes0 %09.2830ex2906190040Cyclopropylmethanol (CAS RN 2516-33-8)1.1.-31.12.20 tonnes0 %09.2837ex2903793020Bromochloromethane (CAS RN 74-97-5)1.1.-31.12.600 tonnes0 %09.2839ex29333999092-(2-Pyridyl)ethanol (CAS RN 103-74-2) with a purity by weight of 99 % or more1.1.-31.12.700 tonnes0 % 09.2840ex8104300020 Magnesium powder: of purity by weight of 98 % or more, but not more than 99,5 %, and with a particle size of 0,2 mm or more but not more than 0,8 mm 1.1.-31.12.2000 tonnes0 %09.2842293212002-Furaldehyde (furfuraldehyde)1.1.-31.12.10000 tonnes0 %09.2846ex3907400025Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of not less than 98,5 % by weight, in the form of pellets or granules, with a luminous transmittance of not less than 88,5 %, measured using a test sample with a thickness of 4 mm at a wavelength of λ = 400 nm (according to ISO 13468-2)1.1.-31.12.2000 tonnes0 %09.2848ex5505101010Waste of synthetic fibres (including noils, yarn waste, and garnetted stock) of nylon or other polyamides (PA6 and PA66)1.1.-31.12.10000 tonnes0 %09.2849ex0710806910Mushrooms of the species Auricularia polytricha (uncooked or cooked by steaming or boiling), frozen, for the manufacture of prepared meals1.1.-31.12.700 tonnes0 %09.2851ex2907120010O-cresol (CAS RN 95-48-7) having a purity of not less than 98,5 % by weight1.1.-31.12,20000 tonnes0 %09.2852ex2914290060Cyclopropyl methyl ketone (CAS RN 765-43-5)1.1.-31.12.300 tonnes0 %09.2854ex29241900853-Iodoprop-2-yn-1-yl butylcarbamate (CAS RN 55406-53-6)1.1.-31.12.450 tonnes0 %09.2855ex3910000010Liquid poly(methylhydrosiloxane) with terminal trimethylsilyl groups (CAS RN 63148-57-2) with a purity by weight of 99,9 % or more1.1.-31.12.1000 tonnes0 %09.2856ex29269070842-Nitro-4(trifluoromethyl)benzonitrile (CAS RN 778-94-9)1.1.-31.12.900 tonnes0 %09.2860ex29336980301,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine (CAS RN 15875-13-5)1.1.-31.12.600 tonnes0 % 09.2872ex2833298040Caesium sulphate (CAS RN 10294-54-9) in solid form or as aqueous solution containing by weight 48 % or more but not more than 52 % of caesium sulphate1.1.-31.12.400 tonnes0 %09.2874ex2924297087Paracetamol (INN) (CAS RN 103-90-2)1.1.-31.12.20000 tonnes0 %09.2876ex3811290057 Additives consisting of reaction products of diphenylamine and branched nonenes with: more than 20 % but not more than 50 % by weight 4-monononyldiphenylamine, and more than 50 % but not more than 80 % by weight 4,4'-dinonyldiphenylamine, a total percentage of 2,4-dinonyldiphenylamine and 2,4'-dinonyldiphenylamine of not more than 15 % by weight, used for the manufacture of lubricating oils 1.1.-31.12.900 tonnes0 %09.288938051090Sulphate turpentine1.1.-31.12.25000 tonnes0 %09.2907ex3824999367

Mixture of phytosterols, in the form of powder, containing by weight: 75 % or more of sterols, not more than 25 % of stanols, for use in the manufacture of stanols/sterols or stanol/sterol esters 1.1.-31.12.2500 tonnes0 %09.2908ex3804000010Sodium lignosulphonate (CAS RN 8061-51-6)1.1.-31.12.40000 tonnes0 %09.2910ex8708999775Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 871.1.-31.12.200000 pieces0 % 09.2913 ex24011035 ex24011070 ex24011095 ex24011095 ex24011095 ex24012035 ex24012070 ex24012095 ex24012095 ex24012095 91 10 11 21 91 91 10 11 21 91 Natural unmanufactured tobacco, whether or not cut in regular size, having a custom value of not less than EUR 450 per 100 kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 240210001.1.-31.12.3000 tonnes0 %09.2921ex29221900222-(dimethylamino)ethyl acrylate (CAS RN 2439-35-2) with a purity by weight of 99 % or more1.1.-31.12.14000 tonnes0 %09.2922ex2923900088Aqueous solution containing by weight 78 % or more but not more than 82 % of [2-(acryloyloxy)ethyl]trimethylammonium chloride (CAS RN 44992-01-0)1.1.-31.12.10000 tonnes0 %09.2923ex3808942040 Aqueous solution containing by weight: 10,0 % or more but not more than 11,3 % of 5-chloro-2-methyl-2H-isothiazol-3-one, 3,0 % or more but not more than 4,1 % of 2-methyl-2H-isothiazol-3-one, a combined concentration of isothiazolones (CAS RN 55965-84-9) of 13,0 % or more but not more than 15,4 %, 18 % or more but not more than 22 % of nitrates, calculated as sodium nitrate, and 5 % or more but not more than 8 % of chlorides, calculated as sodium chloride 1.1.-31.12.3000 tonnes0 % 09.2928ex2811220040Silica filler in the form of granules, with a purity by weight of 97 % or more of silicon dioxide1.1.-31.12.1700 tonnes0 %09.2931ex3911901110Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-1,4-phenyleneisopropylidene-1,4-phenylene) (CAS RN 25135-51-7 and CAS RN 25154-01-2), in one of the forms mentioned in note 6(b) to this chapter containing by weight not more than 20 % of additives1.1.-31.12.6300 tonnes0 %09.2933ex29039980301,3-Dichlorobenzene (CAS RN 541-73-1)1.1.-31.12.2600 tonnes0 %09.2935ex3806100010Rosin and resin acids obtained from fresh oleoresins1.1.-31.12.280000 tonnes0 %09.2945ex2940000020D-Xylose (CAS RN 58-86-6)1.1.-31.12.400 tonnes0 %09.2975ex2918300010Benzophenone-3,3',4,4'-tetracarboxylic dianhydride (CAS RN 2421-28-5)1.1.-31.12.1000 tonnes0 %