Commission Delegated Regulation (EU) 2026/50of 12 November 2025amending Delegated Regulation (EU) 2022/1636 as regards the data of the documents exchanged in the context of movement of excise goods

Commission Delegated Regulation (EU) 2026/50 of 12 November 2025 amending Delegated Regulation (EU) 2022/1636 as regards the data of the documents exchanged in the context of movement of excise goods THE EUROPEAN COMMISSION, Having regard to the Treaty on the Functioning of the European Union, Having regard to Council Directive (EU) 2020/262 of 19 December 2019 laying down the general arrangements for excise duty OJ L 58, 27.2.2020, p. 4, ELI: http://data.europa.eu/eli/dir/2020/262/oj. , and in particular Article 29(1) and Article 43(1) thereof, Whereas: (1) Under Directive (EU) 2020/262, the Commission is to establish the structure and content of administrative documents exchanged through the computerised system referred to in Article 1 of Decision (EU) 2020/263 of the European Parliament and of the Council Decision (EU) 2020/263 of the European Parliament and of the Council of 15 January 2020 on computerising the movement and surveillance of excise goods (OJ L 58, 27.2.2020, p. 43, ELI: http://data.europa.eu/eli/dec/2020/263/oj). (the computerised system). (2) The structure and content of those documents is laid down in Annex I and Annex II of Commission Delegated Regulation (EU) 2022/1636 Commission Delegated Regulation (EU) 2022/1636 of 5 July 2022 supplementing Council Directive (EU) 2020/262 by establishing the structure and content of the documents exchanged in the context of movement of excise goods, and establishing a threshold for the losses due to the nature of the goods (OJ L 247, 23.9.2022, p. 2, ELI: http://data.europa.eu/eli/reg_del/2022/1636/oj). to ensure a uniform completion of the necessary formalities and facilitate the supervision of movements of excise goods. (3) Pursuant to Directive (EU) 2020/262, the computerised system was modified to include the movement of excise goods that are exported outside the Union and the movement of excise goods which have been released for consumption in the territory of one Member State that are moved to the territory of another Member State in order to be delivered there for commercial purposes. Following these changes, certain data elements of the administrative documents have become obsolete or required a modification. The computerised system should be revised to correct any inconsistencies that have been detected. (4) Delegated Regulation (EU) 2022/1636 should therefore be amended accordingly, to lay down the changes in the structure and content of the administrative documents. (5) In order to allow Member States adequate time to prepare for those changes, and to align the application date of this Regulation with the date in which the new version of the computerised system referred to in Decision (EU) 2020/263 becomes operational, this Regulation should apply from 12 February 2026, HAS ADOPTED THIS REGULATION:

Article 1

Annex I to Delegated Regulation (EU) 2022/1636 is replaced by the text set out in the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

It shall apply from 12 February 2026. This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 12 November 2025. For the Commission The President Ursula von der Leyen

Annex

ANNEX

Annex

ANNEX I Messages used for the purpose of movements of excise goods under suspension of excise duty or previously released for consumption in the territory of one Member State and moved to the territory of another Member State to be delivered there for commercial purposes EXPLANATORY NOTES

1. The data elements of the electronic messages Where, in accordance with Article 9 of this Regulation, certain requirements of this Annex apply to the fallback documents referred to in Articles 26, 27, 38 and 37 of Directive (EU) 2020/262, the explanatory notes shall apply mutatis mutandis to those documents. exchanged in accordance with Articles 20 to 25 and Articles 36 and 37 of Directive (EU) 2020/262 shall be structured in data groups and, where applicable, data subgroups as set out in Tables 1 to 9 of this Annex. The columns of Tables 1 to 9 shall contain the following information: (a) column A: the numeric code (number) attributed to each data group and data subgroup. Each subgroup follows the sequence number of the data (sub)group of which it forms part (for example: where the data group number is 1, one data subgroup of this group is 1.1 and one data subgroup of this subgroup is 1.1.1); (b) column B: the alphabetic code (letter) attributed to each data element in a data (sub)group; (c) column C: an identification of the data (sub)group or data element; (d) column D: a value for each data (sub)group or data element indicating whether the insertion of the corresponding data is: (i) required (R), meaning that the data must be provided. When a data (sub)group is optional (O) or conditional (C), data elements within that group can still be R when the competent authorities of the Member State have decided that the data in this (sub)group must be completed or when the condition applies; (ii) optional (O), meaning that the insertion of the data is optional for the person submitting the message (the consignor or consignee) except where a Member State has stipulated that the data are required in accordance with the option provided for in column E for some of the optional data (sub)groups or data elements; (iii) conditional (C), meaning that the use of the data (sub)group or data element depends on other data (sub)groups or data elements in the same message; (iv) dependent (D), meaning that the use of the data (sub)group or data element depends on a condition which cannot be checked by the computerised system, as provided for in columns E and F; (e) column E provides the condition(s) for data whose insertion is conditional, specifies the use of the optional and dependent data where applicable and indicates which data must be provided by the competent authorities; (f) column F provides explanations, where necessary, concerning the completion of the message;

(g) column G provides: (i) for some data (sub)groups a number followed by the character x indicating how many times the data (sub)group can be repeated in the message (default = 1); (ii) for each data element, except for data elements indicating the time and/or the date, the characteristics identifying the data type and the data length. The codes for the data types are a for alphabetic, n for numeric and an for alphanumeric. The number following the code provides the admissible data length for the data element concerned. The optional two dots before the length indicator mean that the data have no fixed length, but can have up to a number of digits, as specified by the length indicator. A comma in the data length means that the data can hold decimals, the digit before the comma provides the total length of the attribute, the digit after the comma provides the maximum number of digits after the decimal point; (iii) for data elements indicating the time and/or date, the mention date, time or dateTime, meaning that the date, the time or the date and time must be given using the ISO 8601 standard for representation of dates and time. 2. The following abbreviations are used in Tables 1 to 9: (a) e-AD: electronic administrative document; (b) e-SAD: electronic simplified administrative document; (c) ARC: administrative reference code; (d) SEED: the System for Exchange of Excise Data referred to in Article 19(1) of Council Regulation (EU) No 389/2012 Council Regulation (EU) No 389/2012 of 2 May 2012 on administrative cooperation in the field of excise duties and repealing Regulation (EC) No 2073/2004 (OJ L 121, 8.5.2012, p. 1, ELI: http://data.europa.eu/eli/reg/2012/389/oj). ; (e) EORI Number: Economic Operators Registration and Identification Number; (f) CN Code: Combined Nomenclature Code; (g) MRN: Master Reference Number. Table 1 (referred to in Articles 3 and 4 and in Article 9(1)) Draft electronic (simplified) administrative document and electronic (simplified) administrative document Commission Implementing Regulation (EU) 2022/1637 of 5 July 2022 laying down the rules for the application of Council Directive (EU) 2020/262 as regards the use of documents in the context of movement of excise goods under a duty suspension arrangement and of movement of excise goods after release for consumption, and establishing the form to be used for the exemption certificate (OJ L 247, 23.9.2022, p. 57, ELI: http://data.europa.eu/eli/reg_impl/2022/1637/oj). Council Directive 92/83/EEC of 19 October 1992 on the harmonization of the structures of excise duties on alcohol and alcoholic beverages (OJ L 316, 31.10.1992, p. 21, ELI: http://data.europa.eu/eli/dir/1992/83/oj). Commission Delegated Regulation (EU) 2018/273 of 11 December 2017 supplementing Regulation (EU) No 1308/2013 of the European Parliament and of the Council as regards the scheme of authorisations for vine plantings, the vineyard register, accompanying documents and certification, the inward and outward register, compulsory declarations, notifications and publication of notified information, and supplementing Regulation (EU) No 1306/2013 of the European Parliament and of the Council as regards the relevant checks and penalties, amending Commission Regulations (EC) No 555/2008, (EC) No 606/2009 and (EC) No 607/2009 and repealing Commission Regulation (EC) No 436/2009 and Commission Delegated Regulation (EU) 2015/560 (OJ L 58, 28.2.2018, p. 1, ELI: http://data.europa.eu/eli/reg_del/2018/273/oj).

Regulation (EU) No 1308/2013 of the European Parliament and of the Council of 17 December 2013 establishing a common organisation of the markets in agricultural products and repealing Council Regulations (EEC) No 922/72, (EEC) No 234/79, (EC) No 1037/2001 and (EC) No 1234/2007 (OJ L 347, 20.12.2013, p. 671, ELI: http://data.europa.eu/eli/reg/2013/1308/oj). Regulation (EU) 2019/787 of the European Parliament and of the Council of 17 April 2019 on the definition, description, presentation and labelling of spirit drinks, the use of the names of spirit drinks in the presentation and labelling of another foodstuff, the protection of geographical indications for spirit drinks, the use of ethyl alcohol and distillates of agricultural origin in alcoholic beverages, and repealing Regulation (EC) No 110/2008 (OJ L 130, 17.5.2019, p. 1, ELI: http://data.europa.eu/eli/reg/2019/787/oj). Commission Implementing Regulation (EU) 2021/2266 of 17 December 2021 laying down rules for the application of Council Directive 92/83/EEC as regards the certification and self-certification of independent small producers of alcoholic beverages for excise duty purposes (OJ L 455, 20.12.2021, p. 26, ELI: http://data.europa.eu/eli/reg_impl/2021/2266/oj). Commission Implementing Regulation (EU) 2016/323 of 24 February 2016 laying down detailed rules on cooperation and exchange of information between Member States regarding goods under excise duty suspension pursuant to Council Regulation (EU) No 389/2012 (OJ L 66, 11.3.2016, p. 1, ELI: http://data.europa.eu/eli/reg_impl/2016/323/oj). ABCDEFGATTRIBUTERaSubmission Message TypeR The possible values are: 1Standard submission,2(reserved),3Submission for Duty Paid (to be used for movements of goods already released for consumption). The Submission Message Type must not occur in the e-AD/e-SAD to which an ARC has been assigned, nor in the fallback document referred to in Article 9(1). n1bDeferred Submission FlagDR for submission of an e-AD/e-SAD for a movement that has begun under cover of the fallback document referred to in Article 9(1). Possible values: 0false,1true. The value is false by default. This data element must not occur in the e-AD/e-SAD to which an ARC has been assigned, nor in the fallback document referred to in Article 9(1). n1 1EXCISE MOVEMENTRaDestination Type CodeR Provide the destination of the movement using one of the following values: 1Tax warehouse (Article 16(1), point (a)(i), of Directive (EU) 2020/262),2Registered consignee (Article 16(1), point (a)(ii), of Directive (EU) 2020/262),3Temporary registered consignee Article 16(1), point (a)(ii), and Article 18(3) of Directive (EU) 2020/262),4Direct delivery (Article 16(4) of Directive (EU) 2020/262),5Exempted consignee (Article 16(1), point (a)(iv), of Directive (EU) 2020/262),6Export (point (iii) and (v) of Article 16(1)(a) of Directive (EU) 2020/262),7(reserved),8Unknown destination (consignee unknown; Article 22 of Directive (EU) 2020/262),9Destination – Certified Consignee (Article 33(1) of Directive (EU) 2020/262),10Destination – Temporary Certified Consignee (Articles 33(1) and 35(8) of Directive (EU) 2020/262),11Destination – Return to the place of dispatch of the Consignor (Article 36(5) of Directive (EU) 2020/262).n..2

bJourney TimeRProvide the normal period of time necessary for the journey taking into account the means of transport and the distance involved, expressed in hours (H) or days (D) followed by a two-digit number (examples: H12, or D04). Indication for H shall be less or equal to 24. Indication for D shall be less or equal to the possible values of Maximum Journey Time per Transport Mode Code presented in Code List 12 of Annex II.an3cTransport ArrangementR Identify the person responsible for arranging the first transport using one of the following values: 1Consignor,2Consignee,3Owner of goods,4Other.n1dARCRTo be provided by the competent authorities of the Member State of dispatch upon validation of the draft e-AD/e-SADSee Code list 2 of Annex II.an21eDate and Time of Validation of e-AD/e-SADRTo be provided by the competent authorities of the Member State of dispatch upon validation of the draft e-AD/e-SADThe addressed time is local time.dateTimefSequence NumberRTo be provided by the competent authorities of the Member State of dispatch upon validation of the draft e-AD/e-SAD and for each change of destinationSet to 1 at initial validation and then incremented by 1 in each e-AD/e-SAD generated by the competent authorities of the Member State of dispatch upon each change of destination.n..2gDate and Time of Validation of UpdateCThe date and time of validation of the change of destination message in Table 3, to be provided by the competent authorities of the Member State of dispatch in case of change of destinationThe addressed time is local time.dateTime 2TRADER ConsignorRaTrader Excise NumberRProvide a valid SEED registration number of the authorised warehousekeeper, registered consignor, certified consignor or temporary certified consignor.an13bTrader NameRan..182cStreet NameRan..65dStreet NumberOan..11ePostcodeRan..10fCityRan..50gNAD_LNGRProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a23TRADER Place of DispatchCR if Origin Type Code in box 9d is 1 or 3aTax Warehouse ReferenceCR if Origin Type Code in box 9d is 1Provide a valid SEED registration number of the tax warehouse of dispatch.an13bTrader NameC For box 3b, 3c, 3e and 3f: R if Origin Type Code in box 9d is 3 an..182cStreet NameCan..65dStreet NumberOan..11ePostcodeCan..10fCityCan..50gNAD_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a24OFFICE of Dispatch – ImportCR if Origin Type Code in box 9d is 2aOffice Reference NumberR Provide the code of the customs office responsible for release for free circulation. See Code list 4 of Annex II. an8 5TRADER ConsigneeC R, except for Destination Type Code 8 (See Destination Type Codes in box 1a) aTrader IdentificationC R for Destination Type Code 1, 2, 3, 4, 9, 10 and 11 O for Destination Type Code 6 This data element does not apply for Destination Type Code 5 (See Destination Type Codes in box 1a)

For Destination Type Code: 1, 2, 3, 4, 9 and 10: provide a valid SEED registration number of the authorised warehousekeeper, registered consignee, temporary registered consignee, certified consignee or temporary certified consignee, 6: provide the VAT identification number of the person representing the consignor at the office of export, 11: provide a valid SEED registration number of the consignee, which is the original certified consignor or temporary certified consignor of the movement. an..16bTrader NameRan..182cStreet NameRan..65dStreet NumberOan..11ePostcodeRan..10fCityRan..50gNAD_LNGRProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2hEORI NumberC O for Destination Type Code 6 This data element does not apply for Destination Type Code 1, 2, 3, 4, 5, 8, 9, 10 and 11. (See Destination Type Codes in box 1a) Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(1) of Directive (EU) 2020/262.an..176TRADER COMPLEMENT ConsigneeC R for Destination Type Code 5 (See Destination Type Codes in box 1a) aMember State CodeRProvide the Member State of destination using the Country Code in Code list 3 of Annex II.a2bSerial Number of Certificate of ExemptionOProvide a serial number, if it is mentioned on the excise duty exemption certificate established in Commission Implementing Regulation (EU) 2022/1637.an..255 7TRADER Place of DeliveryC R for Destination Type Code 1, 4, 9 and 10 O for Destination Type Code 2, 3 and 5 Does not apply otherwise. (See Destination Type Codes in box 1a) Provide the actual place of delivery of the excise goods. For Destination Type Code 2, the data group: is O for the e-AD, since the Member State of dispatch can fill in this box with the address of the registered consignee defined in SEED, does not apply for the draft e-AD. aTrader IdentificationC R for Destination Type Code 1, 9 and 10 O for Destination Type Code 2, 3, and 5 (See Destination Type Code in box 1a) For Destination Type Code: 1: provide a valid SEED registration number of the tax warehouse of destination, 2, 3, 5, 9 and 10: provide the VAT identification number or any other identifier. an..16bTrader NameC R for Destination Type Code 1, 2, 3, 5, 9 and 10 O for Destination Type Code 4 (See Destination Type Codes in box 1a) an..182cStreet NameC For box 7c, 7e and 7f: R for Destination Type Code 2, 3, 4, 5, 9 and 10 O for Destination Type Code 1 (See Destination Type Codes in box 1a) an..65dStreet NumberOan..11ePostcodeCan..10fCityCan..50gNAD_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a28OFFICE Place of Delivery – CustomsC R in case of export (Destination Type Code 6) (See Destination Type Codes in box 1a) aOffice Reference NumberR Provide the code of the office of export at which the export declaration will be lodged. See Code list 4 of Annex II. an89e-AD/e-SADRaLocal Reference NumberRA unique serial number assigned to the e-AD/e-SAD by the consignor which identifies the consignment in the records of the consignor.an..22

bInvoice NumberRProvide the number of the invoice relating to the goods. If the invoice has not yet been prepared, the number of the delivery note or any other transport document shall be given.an..35cInvoice DateOThe Member State of dispatch may decide to make this data RThe date of the document shown in box 9b.DatedOrigin Type CodeR The possible values for the origin of the movement are: 1Origin – Tax warehouse (in the situations referred to in Article 16(1)(a) of Directive (EU) 2020/262),2Origin – Import (in the situation referred to in Article 16(1), point (b), of Directive (EU) 2020/262),3Origin – Duty Paid (in the situation referred to in Article 33(1) of Directive (EU) 2020/262).n1eDate of DispatchRThe date at which the movement begins in accordance with Article 19(1) or Article 33(3) of Directive (EU) 2020/262. This date cannot be later than 7 days after the date of submission of the draft e-AD/e-SAD. The date of dispatch can be a date in the past in the case referred to of Article 26 or Article 38 of Directive (EU) 2020/262.DatefTime of DispatchOThe Member State of dispatch may decide to make this data RThe time at which the movement begins in accordance with Article 19(1) or Article 33(3) of Directive (EU) 2020/262. The addressed time is local time.TimegUpstream ARCDTo be provided by the competent authorities of the Member State of dispatch upon validation of new e-ADs following the validation of the message Splitting operation (Table 5) The ARC to be provided is the ARC of the replaced e-AD. See Code list 2 of Annex II. an..21 9.1IMPORT CUSTOMS DECLARATIONCR if Origin Type Code in box 9d is 2 (import)9XaImport Customs Declaration NumberRThe Import Customs Declaration Number shall be provided either by the consignor at the time of submission of the draft e-AD or by the competent authorities of the Member State of dispatch upon validation of the draft e-ADProvide the number(s) of the Import Customs Declaration(s) used for the release for free circulation of the goods concerned.an..2110OFFICE Competent Authority at DispatchRaOffice Reference NumberRProvide the code of the office of the competent authorities in the Member State of dispatch responsible for excise control at the place of dispatch. See Code list 4 of Annex II.an811MOVEMENT GUARANTEERaGuarantor Type CodeRIdentify the person(s) responsible for providing the guarantee using guarantor type code in Code list 5 of Annex II.n..412TRADER GuarantorC R if one of the following Guarantor Type Codes applies: 2, 3, 12, 13, 23, 24, 34, 123, 124, 134, 234 or 1234 (See Guarantor Type Code in Code list 5 of Annex II) Identify the transporter and/or the owner of the goods if they provide the guarantee.2XaTrader Excise NumberOThe Member State of dispatch may decide to make this data RProvide a valid SEED registration number or VAT identification number of the transporter or owner of the excise goods.an13bVAT NumberOan..14cTrader NameC For 12c, d, f and g: O if Trader Excise Number is provided, otherwise R

an..182dStreet NameCan..65eStreet NumberOan..11fPostcodeCan..10gCityCan..50hNAD_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2 13TRANSPORT MODERaTransport Mode CodeR Provide the mode of transport at the time of the start of the movement, using the codes in Code list 6 of Annex II. If Guarantor Type Code is No guarantee is provided according to Article 17(2) and 17(5)(b) of Directive (EU) 2020/262, the Transport Mode Code must be Fixed transport installation or Sea Transport. n..2bComplementary InformationC R if Transport Mode Code is Other Otherwise O Provide a textual description of the mode of transport.an..350cComplementary Information_LNGCR if corresponding text field is usedProvide language code, see Code list 1 of Annex II to define the language used in this data group.a214TRADER Transport ArrangerCR to identify the person responsible for arranging the first transport if value in box 1c is 3 or 4aVAT NumberOThe Member State of dispatch may decide to make this data Ran..14bTrader NameRan..182cStreet NameRan..65dStreet NumberOan..11ePostcodeRan..10fCityRan..50gNAD_LNGRProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a215TRADER First TransporterOThe Member State of dispatch may decide to make this data RIdentify the person carrying out the first transport.aVAT NumberOan..14bTrader NameRan..182cStreet NameRan..65dStreet NumberOan..11 ePostcodeRan..10fCityRan..50gNAD_LNGRProvide language code, see Code list 1 of Annex II to define the language used in this data group.a216TRANSPORT DETAILSR99XaTransport Unit CodeR Provide Transport Unit Code(s) related to the transport mode indicated in box 13a. See Code list 7 of Annex II. n..2bIdentity of Transport UnitsC R if the Transport Unit Code is other than 5 (See box 16a) Enter the registration number of the transport unit(s) when the Transport Unit Code is other than 5.an..35cIdentity of Commercial SealOProvide the identification of the commercial seals, if used to seal the transport unit.an..35dSeal InformationOProvide any additional information concerning those commercial seals (e.g. type of seals used).an..350eSeal Information_LNGCR if corresponding text field is usedProvide language code presented in Code list 1 of Annex II to define the language used in this data group.a2fComplementary InformationOProvide any additional information concerning the transport, e.g. identity of any subsequent transporter, information concerning subsequent transport units.an..350gComplementary Information_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a217E-AD/E-SAD BodyRA separate data group must be used for each product composing the consignment.999xaBody Record Unique ReferenceRProvide a unique sequential number, starting with 1.n..3 bExcise Product CodeR

Provide the applicable Excise Product Code, see Code list 10 of Annex II. If Guarantor Type Code is No guarantee is provided according to Article 17(2) and 17(5)(b) of Directive (EU) 2020/262 the Excise Product Code must be that of an energy product. Excise Product Code S600 is applicable only to e-SAD pursuant to Article 27(1), point (a), of Council Directive 92/83/EEC. an4cCN CodeR Provide the CN Code applicable at the date of dispatch. The value of this data element must be greater than zero. n8dQuantityR Provide quantity (expressed in the unit of measurement associated with the product code – See Code lists 10 and 11 of Annex II). For a movement to a registered consignee referred to in Article 18(3) and certified consignee referred to in Article 35(8) of Directive (EU) 2020/262, the quantity shall not exceed the quantity which it is authorised to receive. For a movement to an exempted organisation referred to in Article 11 of Directive (EU) 2020/262, the quantity shall not exceed the quantity registered in the excise duty exemption certificate. The value of this data element must be greater than zero. n..15,3eGross MassR Provide the gross mass of the consignment (the excise goods with packaging). The value of this data element must be greater than zero. The Gross Mass must be equal to or higher than Net Mass. n..16,6fNet MassR Provide the mass of the excise goods without packaging (for alcohol and alcoholic beverages, energy products and for all tobacco products except cigarettes). The value of this data element must be greater than zero. The Gross Mass must be equal to or higher than Net Mass. n..16,6 gAlcoholic strength by Volume in PercentageCR if applicable for the excise good in question Provide the alcoholic strength (percentage by volume at 20 °C) if applicable in accordance with Code list 10 of Annex II. The value of this data item must be greater than zero. The value of this data item must be greater than 0,5 and less than or equal to 100. n..5,2hDegree PlatoD R if the excise good in question is beer and the Member State of dispatch and/or the Member State of destination tax beer on the basis of degree Plato O if the excise good in question is beer and neither the Member State of dispatch nor the Member State of destination tax beer on the basis of degree Plato Does not apply for anything other than beer. For beer, provide the Degree Plato if the Member State of dispatch and/or the Member State of destination tax beer on that basis. See Code list 10 and 13 of Annex II. In the cases of O, it shall be filled in only if there is a possibility of a change of Destination to a Member State that taxes beer to Degree Plato and the value is missing. The value of this data element must be greater than zero. n..5,2iFiscal MarkOProvide any additional information concerning the fiscal marks required by the Member State of destination.an..350jFiscal Mark_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2kFiscal Mark Used flagDR if fiscal marks are usedProvide 1 if the goods carry or contain fiscal marks or 0 if the goods do not carry or contain fiscal marks.n1lDesignation of OriginO

This box can be used to give certification: (1) in the case of certain wines, relating to the protected designation of origin or geographical indication (PDO or PGI) and the vintage year or the wine-grape variety, in accordance with Articles 24 and 31 of Commission Delegated Regulation (EU) 2018/273. Certification shall be given in the terms mentioned in box 9 of Part I of Annex VII of Delegated Regulation (EU) 2018/273. If the product is a PDO or PGI the terms are followed by the name(s) of the PDO or PGI and its register number(s) as provided for in Article 119(1), point (b), of Regulation (EU) No 1308/2013 of the European Parliament and of the Council; (2) in the case of certain spirit drinks, for which the marketing is relating to the spirit category or categories, geographical indication (GI) and/or the maturation period/age of the product, in accordance with the relevant Union legislation on spirit drinks (in particular Articles 10 and 13(6), Chapter III and Annex I of Regulation (EU) 2019/787 of the European Parliament and of the Council) certification shall be given in the following terms: It is hereby certified that the product described is marketed and labelled in compliance with Regulation (EU) 2019/787. an..350 mDesignation of Origin_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2nSize of ProducerO For alcoholic beverages produced by self-certified independent small producers, the annual production quantity in accordance with Article 5(3) of Commission Implementing Regulation (EU) 2021/2266 shall be provided in case it is intended to claim a reduced excise duty rate in the Member State of destination. The value of this data element shall be greater than zero. n..15oDensityCR if applicable for the excise good in question Provide the density at 15 °C, if applicable in accordance with Code list 10 of Annex II. The value of this data element must be greater than zero. n..5,2pCommercial DescriptionOThe Member State of dispatch may decide to make this data required Provide the commercial description of the goods in order to identify the products transported. For the bulk transport of the wines referred to in paragraphs 1 to 9, 15 and 16 of Part II of Annex VII to Regulation (EU) No 1308/2013 the product description shall contain the optional particulars set out in Article 120 of that Regulation, provided that they are shown on the labelling or that it is planned to show them on the labelling. For any spirit drink, the commercial description shall include its legal name in accordance with Article 10 of Regulation (EU) 2019/787. an..350 qCommercial Description_LNGCR if corresponding text field is usedProvide language code presented in Code list 1 of Annex II to define the language used in this data group.a2rBrand Name of ProductsDR if the excise goods have a brand name. The Member State of dispatch may decide that the brand name of the products transported need not be provided if it is given in the invoice or other commercial document referred to in box 9bProvide the brand name of the goods, if applicable.an..350sBrand Name of Products_LNGCR if corresponding text field is usedProvide language code presented in Code list 1 of Annex II to define the language used in this data group.a2tMaturation Period or Age of ProductsOFor spirit drinks, the maturation period or age must correspond to that indicated in their description, presentation and labelling, as referred to in Article 13(6) of Regulation (EU) 2019/787.an..350uMaturation Period or Age of Products_LNGCR if corresponding text field is usedProvide language code presented in Code list 1 of Annex II to define the language used in this data group.a2vIndependent Small Producers DeclarationO

For alcoholic beverages produced by certified independent small producers, the declaration concerning the type of alcoholic beverage authorised in the certificate in accordance with Article 2 of Implementing Regulation (EU) 2021/2266 shall be added where it is intended to claim a reduced excise duty rate in the Member State of destination. For alcoholic beverages produced by self-certified independent small producers, the declaration concerning the status of the producer in accordance with Article 4, Article 5(1) and Article 5(2) of Implementing Regulation (EU) 2021/2266 shall be added where it is intended to claim a reduced excise duty rate in the Member State of destination. an..350wIndependent Small Producers Declaration_LNGCR if corresponding text field is usedProvide language code presented in Code list 1 of Annex II to define the language used in this data group.a2 17.1PACKAGER99xaKind of Packages CodeRProvide the kind of package using one of the codes in Code list 8 of Annex II.an2bNumber of PackagesCR if marked Countable Provide the number of packages if the packages are countable in accordance with Code list 8 of Annex II. Where the Number of Packages is set to 0, then there shall exist at least one PACKAGE with the same Shipping Marks and Number of Packages with value greater than 0. n..15cIdentity of Commercial SealOProvide the identification of the commercial seals, if used to seal the packages.an..35dSeal InformationOProvide any additional information concerning those commercial seals (e.g. type of seals used).an..350eSeal Information_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2fShipping MarksC R if Number of Packages is 0 O Otherwise an..99917.2WINE PRODUCTDR for wine products included in Part XII of Annex I to Regulation (EU) No 1308/2013aCategory of Wine ProductR For wine products included in Part XII of Annex I to Regulation (EU) No 1308/2013, provide one of the following values: 1Wine without PDO/PGI,2Varietal wine without PDO/PGI,3Wine with PDO or PGI,4Imported wine,5Other.n1 bWine-Growing Zone CodeOR for wine products in bulk (nominal volume of more than 60 litres)Provide the wine-growing zone in which the product transported originates in accordance with Appendix 1 of Annex VII to Regulation (EU) No 1308/2013.n..2cThird Country of OriginCR if Category of Wine Product in box 17.2a is 4 (imported wine)Provide a Country Code as referred in Code list 3 of Annex II other than that of an EU Member State or a territory where Directive (EU) 2020/262 is applicable.a2dOther InformationOan..350eOther Information_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a217.2.1WINE OPERATION CodeDR for wine products in bulk (nominal volume of more than 60 litres)99xaWine Operation CodeRProvide one or several Wine operation Code(s) in accordance with the list in point 2.1.(e)(ii) of part B of Annex V to Delegated Regulation (EU) 2018/273.n..218DOCUMENT CertificateO9xaShort Description of DocumentCR, unless data field 18c or 18e is usedProvide a description of any certificate that relates to the transported goods, for instance certificates related to the Designation of Origin referred to in box 17l.an..350bShort Description of Document_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2cReference of DocumentCR, unless data field 18a or 18e is usedProvide a reference to any certificate that relates to the transported goods.an..350dReference of Document_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2

eDocument TypeCR, unless data field 18a or 18c is usedProvide the document type code presented in Code List 15 of Annex II to Commission Implementing Regulation (EU) 2016/323.an..4fDocument ReferenceCR if Document Type in box 18e is usedan..35 Table 2 (referred to in Article 5) Cancellation of the electronic administrative document (not applicable to e-SAD) ABCDEFG1ATTRIBUTERaDate and Time of Validation of CancellationCTo be provided by the competent authorities of the Member State of dispatch upon validation of the draft cancellation messageThe addressed time is local time.dateTime 2EXCISE MOVEMENT e-ADRaARCRProvide the ARC of the e-AD for which cancellation is requested.an213CANCELLATIONRaCancellation Reason CodeRProvide the reason for cancelling the e-AD, using the codes in Annex II, Code list 9.n1bComplementary InformationC R if Cancellation Reason is 0 O if Cancellation Reason is 1, 2, 3 or 4 (See box 3.a) Provide any additional information concerning the cancellation of the e-AD.an..350cComplementary Information_LNGCR if corresponding text field is usedProvide the language code presented in Annex II, Code list 1 to define the language used in this data group.a2 Table 3 (referred to in Article 6 and Article 9(2)) Messages concerning the change of destination Commission Implementing Regulation (EU) 2015/2447 of 24 November 2015 laying down detailed rules for implementing certain provisions of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code (OJ L 343, 29.12.2015, p. 558, ELI: http://data.europa.eu/eli/reg_impl/2015/2447/oj). ABCDEFG1ATTRIBUTERaDate and Time of Validation of Change of DestinationCTo be provided by the competent authorities of the Member State of dispatch upon validation of the draft change of destination messageThe addressed time is local time.dateTime2e-AD/e-SAD UpdateRaSequence NumberCTo be provided by the competent authorities of the Member State of dispatch upon validation of the draft change of destination messageSet to 1 at initial validation of the e-AD/e-SAD and then incremented by 1 upon each change of destination.n..2 bARCRProvide the ARC of the e-AD/e-SAD of which the destination is changed.an21cJourney timeDR when the journey time changes following the change of destinationProvide the normal period of time necessary for the journey taking into account the means of transport and the distance involved, expressed in hours (H) or days (D) followed by a two-digit number (examples: H12, or D04). Indication for H shall be less or equal to 24. Indication for D shall be less or equal to the possible values of Maximum Journey Time per Transport Mode Code presented in Code list 12 of Annex II.an3dChanged Transport ArrangementDR when the person responsible for arranging the transport changes following the change of destination Identify the person responsible for arranging the transport using one of the following values: 1Consignor,2Consignee,3Owner of goods,4Other.n1eInvoice NumberDR when the invoice changes following the change of destinationProvide the number of the invoice relating to the goods. If the invoice has not yet been prepared, the number of the delivery note or any other transport document shall be given.an..35fInvoice DateOThe Member State of dispatch may decide to make this data R when the Invoice Number changes following the change of destinationThe date of the document shown in box 2e.dategTransport Mode CodeC

R when the Transport Mode changes following the change of destination R if Guarantor Type Code is given and is No guarantee is provided according to Article 17(2) and 17(5)(b) of Directive (EU) 2020/262 O otherwise Provide the mode of transport using the codes in Code list 6 of Annex II. If Guarantor Type Code in box 7a (if given) or in the last e-AD (box 11a of Table 1) or in the last, if any, Change of destination message (box 7b) that indicated change of place of delivery is No guarantee is provided according to Article 17(2) and 17(5)(b) of Directive (EU) 2020/262 the Transport Mode Code must be Fixed transport installation or Sea Transport. n..2 hComplementary InformationCR” if Transport Mode Code is given and is OtherProvide a textual description of the mode of transport.an..350iComplementary Information_LNGCR if corresponding text field is usedProvide language code presented in Code list 1 of Annex II to define the language used in this data group.a23CHANGED DestinationRaDestination Type CodeR Provide the new destination of the movement using one of the following values: 1Tax warehouse (point (i) of Article 16(1)(a) of Directive (EU) 2020/262),2Registered consignee (point (ii) of Article 16(1)(a) of Directive (EU) 2020/262),3Temporary registered consignee (point (ii) of Article 16(1)(a) and Article 18(3) of Directive (EU) 2020/262),4Direct delivery (Article 16(4) of Directive (EU) 2020/262),5(reserved),6Export (point (iii) and (v) of Article 16(1)(a) of Directive (EU) 2020/262),7(reserved),8(reserved),9Destination – Certified Consignee (Article 33(1) of Directive (EU) 2020/262),10Destination – Temporary Certified Consignee (Articles 33(1) and 35(8) of Directive (EU) 2020/262),11Destination – Return to the place of dispatch of the Consignor.n..2 4TRADER New ConsigneeDR when the consignee changes following the change of destinationaTrader IdentificationC R for Destination Type Code 1, 2, 3, 4, 9, 10 and 11 O for Destination Type Code 6 (See Destination Type Codes in box 3a) For Destination Type Code: 1, 2, 3, 4, 9 and 10: provide a valid SEED registration number of the authorised warehousekeeper, registered consignee, certified consignee or temporary certified consignee, 6: provide the VAT identification number of the person representing the consignor at the office of export, 11: provide a valid SEED registration number of the consignee, which is the original certified consignor or temporary certified consignor of the movement. an..16bTrader NameRan..182cStreet NameRan..65dStreet NumberOan..11ePostcodeRan..10fCityRan..50gNAD_LNGRProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2hEORI NumberC O for Destination Type Code 6 This data element does not apply for Destination Type Code 1, 2,3, 4, 9, 10 and 11 (See Destination Type Codes in box 3a) Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(1) of Directive (EU) 2020/262.an..175TRADER Place of DeliveryC

R for Destination Type Code 1, 4, 9 and 10 O for Destination Type Code 2 and 3 Does not apply otherwise (See Destination Type Codes in box 3a) Provide the actual place of delivery of the excise goods. For Destination Type Code 2, the data group: is O after successful validation of the draft change of destination, since the Member State of Dispatch can fill in this box with the address of the Registered Consignee defined in SEED, does not apply for the draft change of destination. aTrader IdentificationC R for Destination Type Code 1, 9 and 10 O for Destination Type Code 2 and 3 (See Destination Type Codes in box 3a) For Destination Type Code: 1: provide a valid SEED registration number of the tax warehouse of destination, 2, 3, 9 and 10: provide the VAT identification number or any other identifier. an..16bTrader NameC R for Destination Type Code 1, 2, 3, 9 and 10 O for Destination Type Code 4 (See Destination Type Codes in box 3a) an..182cStreet NameC For box 5c, 5e and 5f: R for Destination Type Code 2, 3, 4, 9 and 10 O for Destination Type Code 1 (See Destination Type Codes in box 3a) an..65dStreet NumberOan..11ePostcodeCan..10fCityCan..50gNAD_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a26OFFICE Place of Delivery – CustomsC R in case of export (Destination Type Code 6) (See Destination Type Codes in box 3a) aOffice Reference NumberR Provide the code of the office of export at which the export declaration will be lodged in accordance with Article 221(2) of Commission Implementing Regulation (EU) 2015/2447. See Code list 4 of Annex II. Enter a code of a customs office that exists in the customs office list with export role. an87MOVEMENT GUARANTEED O for movements under duty suspension. This data group does not apply to movements of goods already released for consumption aGuarantor Type CodeR Identify the person(s) responsible for providing the guarantee using guarantor type code in Code list 5 of Annex II. If Guarantor Type Code is No guarantee is provided according to Article 17(2) and 17(5)(b) of Directive (EU) 2020/262, the Excise Product Code contained in the last e-AD (box 17b of Table 1) or in the last, if any, Report of receipt/Report of export message (box 7d of Table 6) that indicated partial refusal must be an energy product. n..47.1TRADER GuarantorC R if one of the following Guarantor Type Codes applies: 2, 3, 12, 13, 23, 24, 34, 123, 124, 134, 234 or 1234 (See Guarantor Type Code in Code list 5 of Annex II) Identify the transporter and/or the owner of the goods if they provide the guarantee.2XaTrader Excise NumberOThe Member State of dispatch may decide to make this data RProvide a valid SEED registration number or VAT identification number of the transporter or owner of the excise goods.an13bVAT NumberOan..14cTrader NameC For 7c, d, f and g: O if Trader Excise Number is provided, otherwise R an..182dStreet NameCan..65eStreet NumberOan..11fPostcodeCan..10gCityCan..50hNAD_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a28TRADER New Transport ArrangerCR to identify the person responsible for arranging the transport if the value in box 2d is 3 or 4aVAT NumberOThe Member State of dispatch may decide to make this data Ran..14bTrader NameRan..182

cStreet NameRan..65dStreet NumberOan..11ePostcodeRan..10fCityRan..50gNAD_LNGRProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a29TRADER New TransporterOThe Member State of dispatch may decide to make this data R when the transporter changes following the change of destinationIdentify the new person carrying out the transport.aVAT NumberOan..14bTrader NameRan..182cStreet NameRan..65dStreet NumberOan..11ePostcodeRan..10fCityRan..50gNAD_LNGRProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a210TRANSPORT DETAILSDR when the transport details have changed following the change of destination99xaTransport Unit CodeRProvide Transport Unit Code(s) related to the transport mode indicated in box 2g, see Code list 7 of Annex II.n..2bIdentity of Transport UnitsC R if the Transport Unit Code is other than 5 (See box 10a) Enter the registration number of the transport unit(s) when the Transport Unit Code is other than 5.an..35cIdentity of Commercial SealOProvide the identification of the commercial seals, if used to seal the transport unit.an..35 dSeal InformationOProvide any additional information concerning those commercial seals (e.g. type of seals used).an..350eSeal Information_LNGCR if corresponding text field is usedProvide language code, see Code list 1 of Annex II.a2fComplementary InformationOProvide any additional information concerning the transport, e.g. identity of any subsequent transporter, information concerning subsequent transport units.an..350gComplementary Information_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2 Table 4 (referred to in Articles 6 and 7) Change of destination / splitting of movement ABCDEFG1EXCISE NOTIFICATIONRaNotification TypeRTo be provided by the competent authorities of the Member State of destination (in the case of Notification of Change of Destination) or of the Member State of dispatch (in the case of Notification of splitting) Provide the reason for the notification using one of the following values: 1Change of destination,2Splitting.n1bNotification Date and TimeRTo be provided by the competent authorities of the Member State of destination (in the case of Notification of Change of Destination) or of the Member State of dispatch (in the case of Notification of splitting)The addressed time is local time.dateTime cARCRTo be provided by the competent authorities of the Member State of destination (in the case of Notification of Change of Destination) or of the Member State of dispatch (in the case of Notification of splitting)Provide the ARC of the e-AD or e-SAD (the latter only in case of change of destination) for which the notification is provided.an21dSequence NumberRTo be provided by the competent authorities of the Member State of destination (in the case of Notification of Change of Destination) or of the Member State of dispatch (in the case of Notification of splitting)

Provide the Sequence Number of the e-AD or e-SAD (the latter only in case of change of destination). Set to 1 at initial validation of the e-AD or e-SAD (the latter only in case of change of destination) and then incremented by 1 upon each change of destination. n..22DOWNSTREAM ARCC R if the Notification Type is 2 in box 1a To be provided by the competent authorities of the Member State of dispatch 9xaARCRTo be provided by the competent authorities of the Member State of dispatchan21 Table 5 (referred to in Article 7 and Article 9(2)) Splitting of consignment (not applicable to e-SAD) Commission Delegated Regulation (EU) 2015/2446 of 28 July 2015 supplementing Regulation (EU) No 952/2013 of the European Parliament and of the Council as regards detailed rules concerning certain provisions of the Union Customs Code (OJ L 343, 29.12.2015, p. 1, ELI: http://data.europa.eu/eli/reg_del/2015/2446/oj). ABCDEFG1e-AD SplittingRaUpstream ARCR Provide the ARC of the e-AD to be split. See Code list 2 of Annex II. an21 2MSA of SplittingRaMember State CodeRProvide the Member State in the territory of which is carried out the splitting of the movement using the Member State code in Code list 3 of Annex II.a23e-AD Split DetailsRSplitting is achieved by fully replacing the concerned e-AD by two or several new ones.9xaLocal Reference NumberRA unique serial number assigned to the e-AD by the consignor which identifies the consignment in the records of the consignor.an..22bJourney TimeDR when the journey time changes following the splitting operationProvide the normal period of time necessary for the journey taking into account the means of transport and the distance involved, expressed in hours (H) or days (D) followed by a two-digit number (examples: H12, or D04). Indication for H should be less or equal to 24. Indication for D should be less or equal to the possible values of Maximum Journey Time per Transport Mode Code presented in Code list 12 of Annex II.an3cChanged Transport ArrangementDR when the person responsible for arranging the transport changes following the splitting operation Identify the person responsible for arranging the first transport using one of the following values: 1Consignor,2Consignee,3Owner of goods,4Other.n1 3.1CHANGED DestinationRaDestination Type CodeR Provide the destination of the movement using one of the following values: 1Tax warehouse (point (i) of Article 16(1), point (a) of Directive (EU) 2020/262),2Registered consignee (point (ii) of Article 16(1), point (a), of Directive (EU) 2020/262),3Temporary registered consignee (Article 16(1), point (a)(ii) and Article 18(3) of Directive (EU) 2020/262),4Direct delivery (Article 16(4) of Directive (EU) 2020/262),5(reserved),6Export (Article 16(1), point (a)(iii) and (v), of Directive (EU) 2020/262),7(reserved),8Unknown destination (consignee unknown; Article 22 of Directive (EU) 2020/262).n..23.2TRADER New ConsigneeC O if the Destination Type Code is other than 8 (See Destination Type Codes in box 3.1a)

For Destination Type Code: 1, 2, 3, 4 and 6: Change of the consignee following the splitting operation renders this data group R. aTrader IdentificationC R for Destination Type Code 1, 2, 3 and 4 O for Destination Type Code 6 This data element does not apply for Destination Type Code 8 (See Destination Type Codes in box 3.1a) For Destination Type Code: 1, 2, 3 and 4: provide a valid SEED registration number of the authorised warehousekeeper or registered consignee, 6: provide the VAT identification number of the person representing the consignor at the office of export. an..16bTrader NameRan..182cStreet NameRan..65 dStreet NumberOan..11ePostcodeRan..10fCityRan..50gNAD_LNGRProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2hEORI NumberC O for Destination Type Code 6 This data element does not apply for Destination Type Code 1, 2,3, 4 and 8 (See Destination Type Codes in box 3.1a) Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(1) of Directive (EU) 2020/262.an..173.3TRADER Place of DeliveryC R for Destination Type Code 1 and 4 O for Destination Type Code 3 Does not apply for Destination Type Code 2, 6 and 8 (See Destination Type Codes in box 3.1a) aTrader IdentificationC R for Destination Type Code 1 O for Destination Type Code 2 and 3 Does not apply otherwise. (See Destination Type Codes in box 3.1a) For Destination Type Code: 1: provide a valid SEED registration number of the tax warehouse of destination, 2 and 3: provide the VAT identification number or any other identifier. an..16bTrader NameC R for Destination Type Code 1, 2 and 3 O for Destination Type Code 4 Does not apply otherwise. (See Destination Type Codes in box 3.1a) an..182cStreet NameC For box 3.3c, 3.3e and 3.3f: R for Destination Type Code 2, 3 and 4 O for Destination Type Code 1 Does not apply otherwise. (See Destination Type Codes in box 3.1a) an..65dStreet NumberOan..11ePostcodeCan..10fCityCan..50gNAD_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2 3.4OFFICE Place of Delivery – CustomsC R in case of export (Changed Destination Type Code 6) Does not apply for any other Destination Type Code (See Destination Type Codes in box 3.1a) aOffice Reference NumberR Provide the code of the office of export at which the export declaration will be lodged in accordance with Commission Delegated Regulation (EU) 2015/2446. See Code list 4 of Annex II. an83.5TRADER New Transport ArrangerCR to identify the person responsible for arranging the transport if the value in box 3c is 3 or 4aVAT NumberOThe Member State of dispatch may decide to make this data Ran..14bTrader NameRan..182cStreet NameRan..65dStreet NumberOan..11ePostcodeRan..10fCityRan..50gNAD_LNGRProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a23.6TRADER New TransporterOThe Member State of dispatch may decide to make this data R when the transporter changes following the splitting operationIdentify the person carrying out the new transport.aVAT NumberOan..14bTrader NameRan..182cStreet NameRan..65

dStreet NumberOan..11ePostcodeRan..10fCityRan..50gNAD_LNGRProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a23.7TRANSPORT DETAILSDR when the transport details have changed following the splitting operation99XaTransport Unit CodeRProvide the Transport Unit Code(s). See Code list 7 of Annex II.n..2bIdentity of Transport UnitsC R if the Transport Unit Code is other than 5 (See box 3.7a) Enter the registration number of the transport unit(s) when the Transport Unit Code is other than 5.an..35cIdentity of Commercial SealOProvide the identification of the commercial seals, if used to seal the transport unit.an..35dSeal InformationOProvide any additional information concerning those commercial seals (e.g. type of seals used).an..350eSeal Information_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2fComplementary InformationOProvide any additional information concerning the transport, e.g. identity of any subsequent transporter, information concerning subsequent transport units.an..350gComplementary Information_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2 3.8E-AD BodyRA separate data group must be used for each product composing the consignment.999xaBody Record Unique ReferenceR Provide the Body Record Unique Reference of the product in the original split e-AD. The Body Record Unique Reference must be unique per e-AD Split Details. The value of this data element must be greater than zero. n..3bExcise Product CodeRProvide the applicable excise product code, see Code list 10 of Annex II.an..4cCN CodeR Provide the CN code applicable at the date of submission of the splitting operation. The value of this data element must be greater than zero. n8dQuantityR Provide quantity (expressed in the unit of measurement associated with the product code – See Code lists 10 and 11 of Annex II). For a movement to a registered consignee referred to in Article 18(3) of Directive (EU) 2020/262, the quantity shall not exceed the quantity which he is authorised to receive. For a movement to an exempted organisation referred to in Article 11 of Directive (EU) 2020/262, the quantity shall not exceed the quantity registered in the excise duty exemption certificate. The value of this data element must be greater than zero. n..15,3eGross MassR Provide the gross mass of the consignment (the excise goods with packaging). The value of this data element must be greater than zero. The Gross Mass must be equal to or higher than Net Mass. n..16,6fNet MassR Provide the mass of the excise goods without packaging. The value of this data element must be greater than zero. The Gross Mass must be equal to or higher than Net Mass. n..16,6 iFiscal MarkOProvide any additional information concerning the fiscal marks required by the Member State of destination.an..350jFiscal Mark_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 in Annex II to define the language used in this data group.a2kFiscal Mark Used flagDR if fiscal marks are usedProvide 1 if the goods contain or carry fiscal marks or 0 if the goods do not contain or carry fiscal marks.n1oDensityCR if applicable for the excise good in question

Provide the density at 15 °C, if applicable in accordance with Code list 10 in the table in Annex II. The value of this data element must be greater than zero. n..5,2pCommercial DescriptionOThe Member State of dispatch may decide to make this data requiredProvide the commercial description of the goods in order to identify the products transported.an..350qCommercial Description_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2rBrand Name of ProductsDR if the excise goods have a brand nameProvide the brand name of the goods, if applicable.an..350sBrand Name of Products_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a23.8.1PACKAGER99xaKind of Packages CodeRProvide the kind of package, using one of the codes in Code list 8 of Annex II.an2bNumber of PackagesCR if marked Countable Provide the number of packages if the packages are countable in accordance with Code list 8 of Annex II. In case the Number of Packages is set to 0, then there should exist at least one PACKAGE with the same Shipping Marks and Number of Packages with value greater than 0. n..15 cIdentity of Commercial SealOProvide the identification of the commercial seals, if used to seal the packages.an..35dSeal InformationOProvide any additional information concerning those commercial seals (e.g. type of seals used).an..350eSeal Information_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2fShipping MarksC R if Number of Packages is 0 O Otherwise an..999 Table 6 (referred to in Article 8 and Article 9(3)) Report of receipt / Report of export ABCDEFG1ATTRIBUTERaDate and Time of Validation of Report of Receipt/ExportCTo be provided by the competent authorities of the Member State of destination/export upon validation of the Report of receipt/Report of exportThe addressed time is local time.dateTime2EXCISE MOVEMENTRaARCRProvide the ARC of the e-AD/e-SAD. See Code list 2 of Annex II.an21 bSequence NumberR Provide the sequence number of the e-AD/e-SAD. Set to 1 at initial validation of the e-AD/e-SAD and then incremented by 1 upon each change of destination n..23TRADER ConsigneeRaTrader IdentificationC R for Destination Type Code 1, 2, 3, 4, 9, 10 and 11 O for Destination Type Code 6 Does not apply for Destination Type Code 5 (See Destination Type Codes in box 1a of Table 1) For Destination Type Code: 1, 2, 3, 4, 9 and 10 provide a valid SEED registration number of the authorised warehousekeeper, registered consignee, temporary registered consignee, certified consignee or temporary certified consignee, 6: provide the VAT identification number of the person representing the consignor at the office of export, 11: provide a valid SEED registration number of the consignee, which is the original certified consignor or temporary certified consignor of the movement.

an..16bTrader NameRan..182cStreet NameRan..65dStreet NumberOan..11ePostcodeRan..10fCityRan..50gNAD_LNGRProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2hEORI NumberC O for Destination Type Code 6 This data element does not apply for Destination Type Code 1, 2,3, 4, 5, 8, 9, 10 and 11 (See Destination Type Codes in box 1a of Table 1) Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(1) of Directive (EU) 2020/262.an..17 4TRADER Place of DeliveryC R for Destination Type Code 1 and 4 O for Destination Type Code 2, 3, 5, 9 and 10 Does not apply otherwise (See Destination Type Codes in box 1 a of Table 1) Provide the actual place of delivery of the excise goods.aTrader IdentificationC R for Destination Type Code 1, 9 and 10 O for Destination Type Code 2, 3 and 5 Does not apply otherwise (See Destination Type Codes in box 1a of Table 1) For Destination Type Code: 1: provide a valid SEED registration number of the tax warehouse of destination, 2, 3, 5, 9 and 10: provide the VAT identification number or any other identifier. an..16bTrader NameC R for Destination Type Code 1, 2, 3, 5, 9 and 10 O for Destination Type Code 4 (See Destination Type Codes in box 1a of Table 1) an..182cStreet NameC For box 4c, 4e and 4f: R for Destination Type Code 2, 3, 4, 5, 9 and 10 O for Destination Type Code 1 (See Destination Type Codes in box 1a of Table 1) an..65dStreet NumberOan..11ePostcodeCan..10fCityCan..50gNAD_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a25OFFICE of DestinationC R for Destination Type Code 1, 2, 3, 4, 5, 9, 10 and 11 (See Destination Type Codes in box 1a of Table 1) aOffice Reference NumberRProvide the code of the office of the competent authorities in the Member State of destination responsible for excise control at the place of destination. See Code list 4 of Annex II.n8 6REPORT of Receipt/ExportRaDate of Arrival of the Excise GoodsRThe date at which the movement ends in accordance with Articles 19(2) and 33(4) of Directive (EU) 2020/262.DatebGlobal Conclusion of ReceiptR The possible values are: 1Receipt accepted and satisfactory,2Receipt accepted although unsatisfactory,3Receipt refused,4Receipt partially refused,21Exit accepted and satisfactory,22Exit accepted with minor discrepancies detected,23Exit refused.n..2cComplementary informationOProvide any additional information concerning the receipt of the excise goods.an..350dComplementary information_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a27REPORT of Receipt/Export BODYC R if the value of the Global Conclusion of Receipt is other than 1 and 21 (See box 6b) 999XaBody Record Unique ReferenceR Provide the Body Record Unique Reference of the associated e-AD/e-SAD (box 17a of Table 1) related to the same excise product as in the associated e-AD/e-SAD for which one of the codes other than 1 and 21 is applicable.

The value of this data element must be greater than zero. n..3 bIndicator of Shortage or ExcessDR when a shortage or excess is detected for the body record concerned Possible values are: S = Shortage, E = Excess. a1cObserved Shortage or ExcessCR if indicator in box 7b is given Provide quantity (expressed in the unit of measurement associated with the product code – See Code lists 10 and 11). The value of this data element must be greater than zero. n..15,3dExcise Product CodeRProvide the applicable excise product code, see Code list 10 of Annex II.an4eRefused QuantityC R if the Global Conclusion of Receipt code is 4 (See box 6b) Provide quantity for each body record for which excise goods are refused (expressed in the unit of measurement associated with the product code – see Code lists 10 and 11 of Annex II). The value of this data element must be greater than zero. n..15,37.1UNSATISFACTORY REASOND R for each body record for which the Global Conclusion of Receipt code 2, 3, 4, 22 or 23 applies (See box 6b) 9XaUnsatisfactory ReasonR Possible values are: 0Other,1Excess,2Shortage,3Goods damaged,4Broken seal,5Reported by AES,7Quantity higher than the one on the temporary authorisation.n1 bComplementary InformationC R if Unsatisfactory Reason Code is 0 O if Unsatisfactory Reason Code is 1, 2, 3, 4, 5 or 7 (See box 7.1a) Provide any additional information concerning the receipt of the excise goods.an..350cComplementary Information_LNGCR if corresponding text field is usedProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2 Table 7 (referred to in Article 6a(1)) Notification of accepted export (not applicable to e-SAD) ABCDEFG1ATTRIBUTERaDate and Time of IssuanceRdateTime2TRADER ConsigneeOaTrader IdentificationC O for Destination Type Code 6 (See Destination Type Codes in box 1a of Table 1) Provide the VAT identification number of the person representing the consignor at the office of export.an..16bTrader NameRan..182cStreet NameRan..65dStreet NumberOan..11ePostcodeRan..10fCityRan..50gNAD_LNGRProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2 hEORI NumberC O for Destination Type Code 6 This data element does not apply for Destination Type Code 1, 2, 3, 4, 5, 8, 9, 10 and 11 (See Destination Type Codes in box 1a of Table 1) Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(1) of Directive (EU) 2020/262.an..173EXCISE MOVEMENT E-ADR999XaAdministrative Reference CodeRProvide the ARC of the e-AD. See Code list 2 of Annex II.an21bSequence NumberRThe value of this data element must be greater than zero.n..24CUSTOMS OFFICE Export PlaceOaReference NumberRProvide the code of the office of the competent authorities in the Member State of export responsible for excise control at the place of export. See Code list 4 of Annex II.an85EXPORT DECLARATION ACCEPTANCE/RELEASERaReference Number of Sender Customs OfficeRProvide the code of the office of the competent authorities in the Member State of export responsible for excise control at the place of export. See Code list 4 of Annex II.an8bIdentification of Sender Customs OfficerOan..35cDate of AcceptanceC

R for Export Declaration Acceptance Does not apply for Goods Released for Export (See box 5f) DatedDate of ReleaseC R for Goods Released for Export Does not apply for Export Declaration Acceptance (See box 5f) Date eDocument Reference NumberRProvide a valid MRN or export customs declaration number confirmed against the Customs data.an..21fExport Declaration Acceptance or Goods Released for ExportR Possible values: 0No or False,1Yes or True. 0 corresponds to the acceptance of the export declaration and 1 corresponds to the release of goods for export. n1 Table 8 (referred to in Article 6a(1)) Customs rejection of electronic administrative document (not applicable to e-SAD) ABCDEFG1ATTRIBUTERaDate and Time of IssuanceRdateTime2TRADER ConsigneeOaTrader IdentificationC O for Destination Type Code 6 (See Destination Type Codes in box 1a of Table 1) Provide the VAT identification number of the person representing the consignor at the office of export.an..16bTrader NameRan..182cStreet NameRan..65dStreet NumberOan..11ePostcodeRan..10 fCityRan..50gNAD_LNGRProvide the language code presented in Code list 1 of Annex II to define the language used in this data group.a2hEORI NumberC O for Destination Type Code 6 This data element does not apply for Destination Type Code 1, 2, 3, 4, 5, 8, 9, 10 and 11 (See Destination Type Codes in box 1a of Table 1) Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(1) of Directive (EU) 2020/262an..173CUSTOMS OFFICE Export PlaceOaReference NumberR Provide the code of the office of the competent authorities in the Member State of export responsible for excise control at the place of export. See Code list 4 of Annex II. an84REJECTIONRaRejection Date and TimeRdateTimebRejection Reason CodeR Possible values: 1Import data not found,2The content of the e-AD does not match with import data,3(reserved),4Negative Cross-check result,5Unsatisfactory Control Result at Office of Export,6ARC removed from Export Declaration Amendment (IE513) message,7e-AD Request Rejection,8Pre-Lodged Export Declaration Cancellation/Timer Awaiting for Export Presentation Notification Expiration.n1 5EXPORT DECLARATION INFORMATIONC R for Rejection Reason Code 4 or 5 Does not apply for Rejection Reason Code 1 and 2 (See box 4b) aLocal Reference NumberC R for Rejection Reason Code 4 Does not apply for Rejection Reason Code 5 (See box 4b) an..22bDocument Reference NumberC R for Rejection Reason Code 5 Does not apply for Rejection Reason Code 4 (See box 4b) an..215.1NEGATIVE CROSS-CHECK VALIDATION RESULTSC R for Rejection Reason Code 4 Does not apply otherwise (See box 4b) 999X5.1.1UBR CROSS-CHECK RESULTR999XaAdministrative Reference CodeRProvide the ARC of the e-AD. See Code list 2 of Annex II.an21bBody Record Unique ReferenceRn..3 cDiagnosis CodeR Possible values: 1(reserved),2Body Record Unique Reference does not exist in the e-AD or No corresponding GOODS ITEM in the export declaration,3(reserved),4Weight/mass do not match,5(reserved),6CN codes do not match,7Weight/mass do not match and CN codes do not match.n1dValidation ResultR

Possible values: 0No or False,1Yes or True. Value 0 is used in case of a missing UBR, Value 1 is used in case where a discrepancy has been identified in COMBINED NOMENCLATURE CODE CROSS-CHECK RESULT and/or in NET MASS CROSS-CHECK RESULT. n1eRejection ReasonOan..5125.1.1.1COMBINED NOMENCLATURE CODE CROSS-CHECK RESULTC 5.1.1.1 and/or 5.1.1.2 are R if: the value in box 5.1.1.d is 1 (Validation Result is equal to 1) 5.1.1.1 and 5.1.1.2 do not apply if: the value in box 5.1.1.d is 0 (Validation Result is equal to 0) aValidation ResultR Possible values: 0No or False,1Yes or True. Value 0 is used when the cross-check validation result for 5.1.1.1 is unsuccessful, Value 1 is used when the cross-check validation result is successful. n1bRejection ReasonOan..5125.1.1.2NET MASS CROSS-CHECK RESULTC 5.1.1.1 and/or 5.1.1.2 are R if: the value in box 5.1.1.d is 1 (Validation Result is equal to 1) or 5.1.1.1 and 5.1.1.2 do not apply if: the value in box 5.1.1.d is 0 (Validation Result is equal to 0) aValidation ResultR Possible values: 0No or False,1Yes or True. Value 0 is used when the cross-check validation result for 5.1.1.2 is unsuccessful, Value 1 is used when the cross-check validation result is successful. n1bRejection ReasonOan..512 5.2NON-RELEASE FOR EXPORTC R for Rejection Reason Code 5 Does not apply otherwise (See box 4b) Non-Release for Export, Notification to Member State of Export.aDocument Reference NumberRan..216EXCISE MOVEMENT E-ADC R for Rejection Reason Code 4, 5, 6, 7 or 8 Does not apply otherwise (See box 4b) 999XaAdministrative Reference CodeRProvide the ARC of the e-AD. See Code list 2 of Annex II.an21bSequence NumberRThe value of this data element must be greater than zero.n..27DRAFT E-ADC R for Rejection Reason Code 1 or 2 Does not apply otherwise (See box 4b) aLocal Reference NumberRProvide the Local Reference Number of the import customs declaration.an..22 Table 9 (referred to in Article 6a(2) and Article 9(3)) Export declaration invalidation notification to MSA of Dispatch/Consignor (not applicable to e-SAD) ABCDEFG1EXCISE MOVEMENTR999XaAdministrative Reference CodeRProvide the ARC of the e-AD. See Code list 2 of Annex II.an21bSequence NumberRThe value of this data element must be greater than zero.n..2 1.1EXPORT OPERATIONRaMRNRan18bInvalidation dateRdate1.2CUSTOMS OFFICE OF EXPORTRaReference NumberRProvide the code of the office of the competent authorities in the Member State of export responsible for excise control at the place of export. See Code list 4 of Annex II.an81.3MSA OF EXPORTRaCountry CodeRProvide the Member State in the territory of which the exportation of the excise goods is carried out, using the Country Code in Code list 3 of Annex II.a2