Commission Regulation (EU) 2026/361of 19 February 2026amending Regulation (EU) No 582/2011 as regards the emissions type-approval of heavy-duty vehicles with on-board fuel and energy consumption monitoring devices(Text with EEA relevance)

Commission Regulation (EU) 2026/361 of 19 February 2026 amending Regulation (EU) No 582/2011 as regards the emissions type-approval of heavy-duty vehicles with on-board fuel and energy consumption monitoring devices (Text with EEA relevance) THE EUROPEAN COMMISSION, Having regard to the Treaty on the Functioning of the European Union, Having regard to Regulation (EC) No 595/2009 of the European Parliament and of the Council of 18 June 2009 on type-approval of motor vehicles and engines with respect to emissions from heavy duty vehicles (Euro VI) and amending Regulation (EC) No 715/2007 and Directive 2007/46/EC and repealing Directives 80/1269/EEC, 2005/55/EC and 2005/78/EC OJ L 188, 18.7.2009, p. 1, ELI: http://data.europa.eu/eli/reg/2009/595/oj. , and in particular Article 5(4), point (e), thereof, Whereas: (1) While Commission Regulation (EU) No 582/2011 Commission Regulation (EU) No 582/2011 of 25 May 2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI) and amending Annexes I and III to Directive 2007/46/EC of the European Parliament and of the Council (OJ L 167, 25.6.2011, p. 1, ELI: http://data.europa.eu/eli/reg/2011/582/oj). sets out requirements for the approval of heavy-duty vehicles with regard to emissions and Commission Implementing Regulation (EU) 2025/2161 Commission Implementing Regulation (EU) 2025/2161 of 27 October 2025 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the technical requirements of on-board devices for the monitoring and recording of fuel and energy consumption and mileage of certain heavy-duty vehicles, and for determining and recording the payload or total weight thereof (OJ L, 2025/2161, 31.10.2025, ELI: http://data.europa.eu/eli/reg_impl/2025/2161/oj). sets out the technical requirements for determining the CO2 emissions and fuel consumption and on-board mass monitoring of heavy-duty vehicles on the road, the declaration of compliance of the on-board fuel and energy consumption monitoring (OBFCM) device and on-board mass monitoring system (OBMM) should be part of the type-approval system instituted by Regulation (EU) No 582/2011. It is therefore necessary to ensure a link between the emissions type-approval and compliance with the OBFCM requirements and to set out new emissions approval characters to allow for the identification of vehicles fitted with OBFCM devices. (2) While the on-board fuel consumption monitoring should be part of the engine type-approval system instituted by Regulation (EU) No 582/2011, the requirement regarding the determination of the vehicle total mass on-board the vehicle may be fulfilled either by the engine manufacturer or by the manufacturer responsible for the vehicle type-approval. Where the engine manufacturer does not provide for the determination of the vehicle total mass as set out in Implementing Regulation (EU) 2025/2161, the responsibility for the on-board mass monitoring should be on the manufacturer responsible for the installation of the engine into the vehicle.

(3) As the fuel consumption values and CO2 emissions of heavy-duty vehicles resulting from the regulatory test procedures under Commission Regulation (EU) 2017/2400 Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles and amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011 (OJ L 349, 29.12.2017, p. 1, ELI: http://data.europa.eu/eli/reg/2017/2400/oj). is complemented by information recorded by the OBFCM device in accordance with Implementing Regulation (EU) 2025/2161 on the vehicles’ average real-world consumption when the vehicle is driven on the road, and as such information is essential for assessing that the regulatory procedures adequately reflect the average real-world CO2 emissions as well as the quantity of fuel and electric energy consumed, the accuracy of those OBFCM devices should be verified during on-road testing. (4) The necessary information on fuel consumption and emissions from the portable emissions measurement systems (PEMS) test procedure should be recorded to assess the accuracy of the OBFCM device as specified in Implementing Regulation (EU) 2025/2161. (5) Regulation (EU) No 582/2011 should therefore be amended accordingly. (6) The measures provided for in this Regulation are in accordance with the opinion of the Technical Committee – Motor Vehicles, HAS ADOPTED THIS REGULATION:

Article 1

Regulation (EU) No 582/2011 is amended as follows: (1) in Article 3, the following paragraphs 15 and 16 are added: 15. In order to receive an EU type-approval of a vehicle with an approved engine system with regard to emissions, or an EU type-approval of a vehicle with regard to emissions, the manufacturer shall ensure that the requirements set out in Article 2 of Commission Implementing Regulation (EU) 2025/2161 are fulfilled. However, the manufacturer shall not be required to declare that the requirements set out in Article 2 of Implementing Regulation (EU) 2025/2161 are met where that manufacturer indicates in the declaration of compliance set out in point 6.2 of Annex I to that Implementing Regulation that new vehicles of the type to be approved will not be registered, placed on the market or entered into service in the Union on or after the relevant date set out in Table 1 of Annex I to that Implementing Regulation. 16. In order to receive an EU type-approval of an engine system or engine family as a separate technical unit, the manufacturer shall ensure that the requirements set out in Article 2 of Implementing Regulation (EU) 2025/2161 are fulfilled. However, the manufacturer shall not be required to declare that the requirements set out in Article 2 of Implementing Regulation (EU) 2025/2161 are met where that manufacturer indicates in the declaration of compliance set out in point 6.1 of Annex I to that Implementing Regulation that new engines of the type to be approved will not be registered, placed on the market or entered into service in the Union on or after the relevant date set out in Table 1 of Annex I to that Implementing Regulation.

Commission Implementing Regulation (EU) 2025/2161 of 27 October 2025 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the technical requirements of on-board devices for the monitoring and recording of fuel and energy consumption and mileage of certain heavy-duty vehicles, and for determining and recording the payload or total weight thereof (OJ L, 2025/2161, 31.10.2025, ELI: http://data.europa.eu/eli/reg_impl/2025/2161/oj).; (2) in Article 6(1a), the following point (e) is added: (e) the requirements set out in Article 2 of Implementing Regulation (EU) 2025/2161 are met, except where the manufacturer indicated in the declaration of compliance set out in point 6.1 of Annex I to that Implementing Regulation that new engines of the type to be approved will not be registered, sold or put into service in the Union on or after the relevant date set out in Table 1 of Annex I to that Implementing Regulation.; (3) in Article 8(1a), the following point (f) is added: (f) the requirements set out in Article 2 of Implementing Regulation (EU) 2025/2161 are met, except where the manufacturer indicates in the declaration of compliance set out in point 6.2 of Annex I to that Implementing Regulation that new vehicles of the type to be approved will not be registered, sold or put into service in the Union on or after the relevant date set out in Table 1 of Annex I to that Implementing Regulation.; (4) in Article 10(1a), the following point (f) is added: (f) the requirements set out in Article 2 of Implementing Regulation (EU) 2025/2161 are met, except where the manufacturer indicates in the declaration of compliance set out in point 6.2 of Annex I to that Implementing Regulation that new vehicles of the type to be approved will not be registered, sold or put into service in the Union on or after the dates set out in Table 1 of Annex I to that Implementing Regulation.; (5) in Article 13, paragraph 1 is replaced by the following:

1. On request of the approval authority and following in-service testing in accordance with Article 12 of this Regulation or following OBFCM or OBMM verification testing in accordance with Article 4 of Implementing Regulation (EU) 2025/2161, the manufacturer shall submit the plan of remedial measures to the approval authority no later than 60 working days after receipt of the notification from the approval authority. Where the manufacturer can demonstrate to the satisfaction of the approval authority that further time is required to investigate the reason for the non-compliance in order to submit a plan of remedial measures, an extension may be granted. ; (6) in Article 17a, the following paragraphs 5 and 6 are added:
2. With effect from 1 July 2027, national authorities shall, in the case of new vehicles in the scope of Implementing Regulation (EU) 2025/2161 which do not comply with the requirements of this Regulation as amended by Commission Regulation (EU) 2026/361, consider certificates of conformity issued in respect of those vehicles to be no longer valid for the purposes of Article 48 of Regulation (EU) 2018/858 and shall, on grounds relating to emissions, prohibit the registration, making available on the market and entry into service of such vehicles.

1. With effect from 29 May 2029, national authorities shall, in the case of new vehicles and engines, consider certificates of conformity issued in respect of those vehicles to be no longer valid for the purposes of Article 48 of Regulation (EU) 2018/858 and shall, on grounds relating to emissions, prohibit the registration, making available on the market and entry into service of such vehicles, except in the case of replacement engines for in-service vehicles, and engines for vehicles produced by small-volume manufacturers as set out in Regulation (EU) 2024/1257 of the European Parliament and of the Council. By way of derogation from the first subparagraph, with effect from 29 November 2027 for new vehicles of category M1 and N1 falling in the scope of Regulation (EU) 595/2009, national authorities shall consider certificates of conformity issues in respect of those vehicles to be no longer valid for the purposes of Article 48 of Regulation (EU) 2018/858 and shall, on grounds relating to emissions, prohibit the registration, making available on the market and entry into service of such vehicle. By way of derogation from the first subparagraph, with effect from 1 July 2030 for new vehicles of category M1 and N1 constructed by small-volume manufacturers as set out in Regulation (EU) 2024/1257, national authorities shall consider certificates of conformity issues in respect of those vehicles to be no longer valid for the purposes of Article 48 of Regulation (EU) 2018/858 and shall, on grounds relating to emissions, prohibit the registration, making available on the market and entry into service of such vehicle. By way of derogation from the first subparagraph, with effect from 1 July 2031 for new vehicles of category M2, M3, N2, and N3 constructed by small-volume manufacturers as set out in Regulation (EU) 2024/1257, national authorities shall consider certificates of conformity issues in respect of those vehicles to be no longer valid for the purposes of Article 48 of Regulation (EU) 2018/858 and shall, on grounds relating to emissions, prohibit the registration, making available on the market and entry into service of such vehicle. Commission Regulation (EU) 2026/361 of 19 February 2026 amending Regulation (EU) No 582/2011 as regards the emissions type-approval of heavy-duty vehicles with on-board fuel and energy consumption monitoring devices (OJ L, 2026/361, 20.2.2026, ELI: http://data.europa.eu/eli/reg/2026/361/oj). Regulation (EU) 2024/1257 of the European Parliament and of the Council of 24 April 2024 on type-approval of motor vehicles and engines and of systems, components and separate technical units intended for such vehicles, with respect to their emissions and battery durability (Euro 7), amending Regulation (EU) 2018/858 of the European Parliament and of the Council and repealing Regulations (EC) No 715/2007 and (EC) No 595/2009 of the European Parliament and of the Council, Commission Regulation (EU) No 582/2011, Commission Regulation (EU) 2017/1151, Commission Regulation (EU) 2017/2400 and Commission Implementing Regulation (EU) 2022/1362 (OJ L, 2024/1257, 8.5.2024, ELI: http://data.europa.eu/eli/reg/2024/1257/oj)..

Article 2

Annexes I, II and VI to Regulation (EU) No 582/2011 are amended in accordance with the Annex to this Regulation.

Article 3

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union. This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 19 February 2026. For the Commission The President Ursula von der Leyen

Annex

ANNEX (1) In Annex I to Regulation (EU) No 582/2011, Appendix 9 is amended as follows: (a) the paragraph is replaced by the following: Section 3 of the EC type-approval number issued according to Articles 6(1), 8(1) and 10(1) shall be composed by the number of the implementing regulatory act or the latest amending regulatory act applicable to the EC type-approval. The number shall be followed by an alphabetical character reflecting the requirements of OBD and SCR systems in accordance with Table 1, or with an alphabetical character and a typographic character reflecting the requirements of OBD systems, SCR systems and OBFCM in accordance with Table 1.; (b) in Table 1, the sixth row is replaced by the following: ERow general requirement of Table 1 or Table 2Row general requirements of Table 1Row general requirements of Table 2General (13)General (14)Yes10 %Yes1.1.2021 (15)1.1.2022 (15)28.5.2029 (15) (c) in Table 1, the following row is added: E+Row general requirements of Table 1 or Table 2Row general requirements of Table 1Row general requirements of Table 2General (13)General (14)Yes10 %Yes—1.7.2027 (16)28.5.2029 (d) in Table 1, the following key is added: (16) For vehicles falling in the scope of Implementing Regulation (EU) 2025/2161. (2) Annex II to Regulation (EU) No 582/2011 is amended as follows: (a) the following point is inserted after point 10.1.7.1: 10.1.7.1a. Odometer reading at test end [km].; (b) the following point is inserted after point 10.1.7.7: 10.1.7.8. Actual mass of the vehicle for the PEMS test with payload (kg).; (c) the following points are inserted after point 10.1.8.17: 10.1.8a. OBFCM instantaneous measured data (if applicable) 10.1.8a.1. Total fuel consumed (lifetime) (kilograms). 10.1.8a.2. Total distance travelled (lifetime) (kilometres). 10.1.8a.3. Engine fuel rate (g/s). 10.1.8a.4. Vehicle fuel rate (g/s). 10.1.8a.5. Vehicle total mass (kg).; (d) the following points are inserted after point 10.1.10.12a: 10.1.10a. OBFCM values (if applicable) 10.1.10a.1. Total fuel consumed (lifetime) (kilograms) at test start. 10.1.10a.2. Total fuel consumed (lifetime) (kilograms) at test end. 10.1.10a.3. Total distance travelled (lifetime) (kilometres) at test start. 10.1.10a.4. Total distance travelled (lifetime) (kilometres) at test end. 10.1.10a.5. Accumulated Engine fuel rate (g). 10.1.10a.6. Accumulated Vehicle fuel rate (g). 10.1.10a.7. Average of vehicle total mass.; (e) in Appendix 1, in Table 1, under point 2.2, the following rows are added before the table notes:

Total fuel consumed (lifetime) (5)kgOBFCM device or ECUTotal distance travelled (lifetime) (5)kmOBFCM device or ECUEngine fuel rate (5)g/sOBFCM device or ECUVehicle fuel rate (5)g/sOBFCM device or ECUVehicle total mass (5)kgOBFCM device or ECU (f) in Appendix 1, in Table 1, under point 2.2, the following table note is added: (5) Where applicable, for vehicles equipped with an engine with an on-board fuel and/or energy monitoring device in accordance with the requirements under Article 2 of Implementing Regulation (EU) 2025/2161.; (g) in point 2.2 of Appendix 1, the following paragraph is added: The original raw data read out from the OBFCM device or ECU shall be made available to the approval authority and, upon request, to the Commission.; (h) in point 2.4 of Appendix 1, the following point is added: 2.4.8. OBFCM device If an engine of the engine family is installed in a vehicle equipped with an on-board device for the monitoring and recording of fuel and/or energy consumption and mileage of motor vehicles in accordance with the requirements referred to in Article 2 of Implementing Regulation (EU) 2025/2161, then the test engine shall be equipped with that on-board device.; (i) in point 2.6.1 of Appendix 1, the following paragraph is added: Where applicable, the recording of the parameters set out in Table 1 as determined by the OBFCM device shall start at the test start.; (j) in point 2.6.2 of Appendix 1, the following paragraph is added: Where applicable, the recording of the parameters set out in Table 1 as determined by the OBFCM device shall continue throughout the normal in-use operation of the engine.; (k) in point 2.6.3 of Appendix 1, the following paragraph is added: Where applicable, the recording of the parameters set out in Table 1 as determined by the OBFCM device shall end at the test end. The odometer reading shall be recorded at test end.. (3) In Point 5.1 of Appendix 1 of Annex VI to Regulation (EU) No 582/2011, the following point (k) is added: (k) Information about instantaneous measured OBFCM values as described in point 10.1.8a.1 to 10.1.8a.5 of Annex II, and averaged and integrated OBFCM values as described in points 10.1.10a.1 to 10.1.10a.7 of Annex II..