TheLawyer.sh
Tilbage

Commission Implementing Regulation (EU) 2026/700of 4 March 2026amending Implementing Regulation (EU) 2024/2651 as regards administrative changes to the Union authorisation of the biocidal product family Taski-Room Care-Suma Family based on Lactic Acid(Text with EEA relevance)

Den Europæiske UnionForordning2026

European Union

Commission Implementing Regulation (EU) 2026/700 of 4 March 2026 amending Implementing Regulation (EU) 2024/2651 as regards administrative changes to the Union authorisation of the biocidal product family Taski-Room Care-Suma Family based on Lactic Acid (Text with EEA relevance) THE EUROPEAN COMMISSION, Having regard to the Treaty on the Functioning of the European Union, Having regard to Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012 concerning the making available on the market and use of biocidal products OJ L 167, 27.6.2012, p. 1, ELI: http://data.europa.eu/eli/reg/2012/528/oj. , and in particular Article 50(2) thereof, Whereas: (1) On 10 October 2024, Commission Implementing Regulation (EU) 2024/2651 Commission Implementing Regulation (EU) 2024/2651 of 10 October 2024 granting a Union authorisation for the biocidal product family Taski-Room Care-Suma Family based on Lactic Acid in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (OJ L, 2024/2651, 11.10.2024, ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj). granted a Union authorisation, under number EU-0031644-0000, to Diversey Europe Operations B.V. for the making available on the market and use of the biocidal product family Taski-Room Care-Suma Family Based on Lactic Acid. The Annex to that Implementing Regulation provides the summary of product characteristics for that biocidal product family. (2) On 9 April 2025, Diversey Europe Operations B.V. submitted to the European Chemicals Agency (the Agency), in accordance with Article 11(1) of Commission Implementing Regulation (EU) No 354/2013 Commission Implementing Regulation (EU) No 354/2013 of 18 April 2013 on changes of biocidal products authorised in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (OJ L 109, 19.4.2013, p. 4, ELI: http://data.europa.eu/eli/reg_impl/2013/354/oj). , a notification of administrative changes to the Union authorisation for the biocidal product family Taski-Room Care-Suma Family Based on Lactic Acid, recorded in the Register for Biocidal Products (Register) under case number BC-KW105377-13. The notified proposed changes to that authorisation concern changes to the address of the authorisation holder and the biocidal product manufacturer. (3) On 28 April 2025, the Agency submitted to the Commission, in accordance with Article 11(3) of Implementing Regulation (EU) No 354/2013, an opinion ECHA Opinion No UAD-C-1818195-15-00/F of 28 April 2025 on the administrative changes of the Union authorisation of the biocidal product family Taski-Room Care-Suma Family Based on Lactic Acid, https://echa.europa.eu/opinions-on-applications-for-union-authorisation. on the notified administrative changes to the Union authorisation for the biocidal product family Taski-Room Care-Suma Family Based on Lactic Acid. In its opinion, the Agency concluded that the proposed changes are administrative changes as referred to in Article 50(3), point (a), of Regulation (EU) No 528/2012 and as specified in Title 1 of the Annex to Implementing Regulation (EU) No 354/2013, and that, after the implementation of the changes, the conditions of Article 19 of Regulation (EU) No 528/2012 will still be met.

(4) On 28 April 2025, the Agency transmitted to the Commission a revised summary of product characteristics for the biocidal product family Taski-Room Care-Suma Family Based on Lactic Acid in all official languages of the Union, covering the administrative changes applied for, in accordance with Article 11(6) of Implementing Regulation (EU) No 354/2013. (5) The Commission concurs with the opinion of the Agency and therefore considers it appropriate to amend the Union authorisation for the biocidal product family Taski-Room Care-Suma Family Based on Lactic Acid to introduce the administrative changes requested by Diversey Europe Operations B.V.. (6) Except for the amendments regarding the proposed administrative changes, all other information included in the summary of product characteristics of Taski-Room Care-Suma Family Based on Lactic Acid, as set out in the Annex to Implementing Regulation (EU) 2024/2651, remains unchanged. (7) In order to enhance clarity and to ease the access of users and interested parties to the consolidated version of the summary of product characteristics which is to be published by the Agency, the Annex to Implementing Regulation (EU) 2024/2651 should be replaced in its entirety. Due to a change in the format used for the generation of the summary of product characteristics in the Register in February 2024, the summary of product characteristics in that Annex should also include some minor editorial and layout changes. (8) Implementing Regulation (EU) 2024/2651 should therefore be amended accordingly, HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Implementing Regulation (EU) 2024/2651 is replaced by the text set out in the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union. This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 4 March 2026. For the Commission The President Ursula von der Leyen

Annex

ANNEX SUMMARY OF PRODUCT CHARACTERISTICS FOR A BIOCIDAL PRODUCT FAMILY Taski-Room Care-Suma Family Based on Lactic Acid Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area PT03: Veterinary hygiene Authorisation number EU-0031644-0000 R4BP asset number EU-0031644-0000 PART I. FIRST INFORMATION LEVEL

  1. ADMINISTRATIVE INFORMATION 1.1. Family name NameTaski-Room Care-Suma Family Based on Lactic Acid 1.2. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area PT03: Veterinary hygiene 1.3. Authorisation holder Name and address of the authorisation holderNameDiversey Europe Operations B.V.AddressDe Corridor 4 (Regulatory team) 3621 ZB Breukelen NLAuthorisation numberEU-0031644-0000R4BP asset numberEU-0031644-0000Date of the authorisation31/10/2024Expiry date of the authorisation30/09/2034

1.4. Manufacturer(s) of the product Name of manufacturerDiversey Europe Operations B.V.Address of manufacturerDe Corridor 4 (Regulatory team) 3621 ZB Breukelen Netherlands (the) Location of manufacturing sites Diversey Europe Operations B.V. site 1 Strada Statale 235 26010 Bagnolo Cremasco (CR) Italy Diversey Europe Operations B.V. site 2 Rembrandtlaan 414 7545 ZW Enschede Netherlands (the) Diversey Europe Operations B.V. site 3 Cotes Park Industrial Estate DE55 4PA Somercotes Alfreton United Kingdom of Great Britain and Northern Ireland (the) Diversey Europe Operations B.V. site 4 Avenida Conde Duque 5, 7 y 9 ; Poligono Industrial La Postura 28343 Valdemoro (Madrid) Spain Diversey Europe Operations B.V. site 5 Morschheimer Strasse 12 67292 Kirchheimbolanden Germany Name of manufacturerMultifill B.V.Address of manufacturerConstructieweg 25-A 3641 SB Mijdrecht Netherlands (the)Location of manufacturing sitesMultifill B.V. site 1 Constructieweg 25-A 3641 SB Mijdrecht Netherlands (the)Name of manufacturerIonic Products LtdAddress of manufacturerBlaris Industrial Estate, Altona Road BT27 5QB Lisburn IrelandLocation of manufacturing sitesIonic Products Ltd site 1 Blaris Industrial Estate, Altona Road BT27 5QB Lisburn IrelandName of manufacturerAerosol Service Sp. z o.o.Address of manufacturerCharnowo 3676-270 Ustka PolandLocation of manufacturing sitesAerosol Service Sp. z o.o. site 1 Charnowo 3676-270 Ustka PolandName of manufacturerOrvema B.V.Address of manufacturerWestkanaaldijk 26-I 3606 AM Maarssen Netherlands (the)Location of manufacturing sitesOrvema B.V. site 1 Westkanaaldijk 26-I 3606 AM Maarssen Netherlands (the)Name of manufacturerCheport spol s.r.o.Address of manufacturerLhotsko 93 76312 Vizovice CzechiaLocation of manufacturing sitesCheport spol s.r.o. site 1 Lhotsko 93 76312 Vizovice Czechia Name of manufacturerHelichem B.V.Address of manufacturerKozakkenberg 5 5951 DL Belfeld Netherlands (the)Location of manufacturing sitesHelichem B.V. site 1 Kozakkenberg 5 5951 DL Belfeld Netherlands (the)Name of manufacturerPluswipes LTDAddress of manufacturerPywell Rd, Willowbrook, East Industrial Estate NN17 5XJ Corby United Kingdom of Great Britain and Northern Ireland (the)Location of manufacturing sitesPluswipes LTD site 1 Pywell Rd, Willowbrook, East Industrial Estate NN17 5XJ Corby United Kingdom of Great Britain and Northern Ireland (the) 1.5. Manufacturer(s) of the active substance(s) Active substanceL-(+)-lactic acidName of manufacturerPurac Biochem bvAddress of manufacturerArkelsedijk 46 4206 AC Gorinchem Netherlands (the)Location of manufacturing sitesPurac Biochem bv site 1 Gran Vial 19-25 08160 Montmelo SpainActive substanceL-(+)-lactic acidName of manufacturerJungbunzlauer S.A.Address of manufacturerZ.I. el Portuaire, B.P. 32 67390 Marckolsheim FranceLocation of manufacturing sitesJungbunzlauer S.A. site 1 Z.I. el Portuaire, B.P. 32 67390 Marckolsheim France 2. PRODUCT FAMILY COMPOSITION AND FORMULATION 2.1. Qualitative and quantitative information on the composition of the family

Common nameIUPAC nameFunctionCAS numberEC numberContent (%)L-(+)-lactic acidActive substance79-33-4201-196-20,352 - 17,6 % (w/w)Methanesulfonic acidNon-active substance75-75-2200-898-60 - 5,11 % (w/w)Alkyl ether carboxylic acidNon-active substance53563-70-50 - 9 % (w/w) Sulphonic acids, C14-17-sec-alkane, sodium saltsNon-active substance97489-15-1307-055-20 - 3 % (w/w)A mixture of: 2-ethylhexyl mono-D-glucopyranoside; 2-ethylhexyl di-D-glucopyranosideNon-active substance414-420-00 - 3,9 % (w/w) 2.2. Type(s) of formulation Formulation type(s) AL Any other liquid SL Soluble concentrate PART II. SECOND INFORMATION LEVEL META SPC(S)

  1. META SPC 1 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 1 identifier IdentifierMeta SPC: Meta SPC 1 1.2. Suffix to the authorisation number Number1-1 1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area PT03: Veterinary hygiene
  2. META SPC 1 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 1 Common nameIUPAC nameFunctionCAS numberEC numberContent (%)L-(+)-lactic acidActive substance79-33-4201-196-217,6 - 17,6 % (w/w)Methanesulfonic acidNon-active substance75-75-2200-898-65,11 - 5,11 % (w/w) Alkyl ether carboxylic acidNon-active substance53563-70-59 - 9 % (w/w)Sulphonic acids, C14-17-sec-alkane, sodium saltsNon-active substance97489-15-1307-055-23 - 3 % (w/w)A mixture of: 2-ethylhexyl mono-D-glucopyranoside; 2-ethylhexyl di-D-glucopyranosideNon-active substance414-420-03,9 - 3,9 % (w/w) 2.2. Type(s) of formulation of the meta SPC 1 Formulation type(s)SL Soluble concentrate
  3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 1 Hazard statements H314: Causes severe skin burns and eye damage. H290: May be corrosive to metals. EUH071: Corrosive to the respiratory tract. Precautionary statements P260: Do not breathe vapours. P280: Wear protective gloves, protective clothing, eye protection, face protection. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a doctor or a physician. P405: Store locked up. P501: Dispose of contents to in accordance with national regulations. P501: Dispose of container to in accordance with national regulations. P234: Keep only in original packaging. P321: Specific treatment (see instruction on this label).
  4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1. Use # 1a - Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport). Product typePT02: Disinfectants and algaecides not intended for direct application to humans or animalsWhere relevant, an exact description of the authorised use-Target organism(s) (including development stage)

Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Enveloped viruses Common name: Enveloped viruses Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport). Application method(s) Method: manual application Detailed description:

  1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
  2. Dipping to wet small objects. Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,38% w/w. This is a 2% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Dilute the product to 2% v/v (2 ml product, add water up to 100 ml). Number and timing of application: Contact time: Bacteria – 5 minutes Yeasts - 15 minutes Enveloped viruses - 5 minutes Category(ies) of usersProfessionalPack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5.0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene; PA - Polyamide) 4.1.1. Use-specific instructions for use Dilute the product with potable water to 2,0% (2 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once. Leave wet for 5 minutes against bacteria and enveloped viruses and 15 minutes against yeasts. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.1.2. Use-specific risk mitigation measures See general directions for use. 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.2. Use description Table 2. Use # 1b – Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport)

Product typePT04: Food and feed areaWhere relevant, an exact description of the authorised use-Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Enveloped viruses only Common name: Enveloped viruses only Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport). Application method(s) Method: manual application Detailed description:

  1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
  2. Dipping to wet small objects. Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,38% w/w. This is a 2% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Dilute the product to 2% v/v (2 ml product, add water up to 100 ml). Number and timing of application: Contact time: 15 minutes Category(ies) of usersProfessionalPack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE, 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 4.2.1. Use-specific instructions for use Dilute the product with potable water to 2,0% (2 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once. Leave wet for 15 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.2.2. Use-specific risk mitigation measures See general directions for use. 4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.3. Use description Table 3. Use # 2 - Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area).

Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area Where relevant, an exact description of the authorised use- Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Scientific name: Enveloped viruses only Common name: Enveloped viruses only Development stage: no data Field(s) of use indoor use Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area). Application method(s) Method: manual application Detailed description: Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,38% w/w. This is a 2% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2). Dilute the product to 2% v/v (2 ml product, add water up to 100 ml). Number and timing of application: Contact time: 5 minutes Category(ies) of usersProfessionalPack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 4.3.1. Use-specific instructions for use Remove gross soiling and pre-clean the surface before applying the product. Dilute the product with potable water to 2,0% (2 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.3.2. Use-specific risk mitigation measures See general directions for use. 4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.4. Use description Table 4. Use # 3 - Disinfection of clean hard non-porous surfaces and small objects in a veterinary area Product typePT03: Veterinary hygieneWhere relevant, an exact description of the authorised use-Target organism(s) (including development stage)

Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of clean hard non-porous surfaces and small objects in a veterinary area. Application method(s) Method: manual application Detailed description:

  1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
  2. Dipping to wet small objects. Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,57% w/w. This is a 3% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected for 5 minutes and apply approx. 19 sprays /m2 or 25 ml/m2 for 30 minutes). Dilute the product to 3% v/v (3 ml product, add water up to 100 ml). Number and timing of application: Contact time: 5 minutes at room temperature (18-25 °C); 30 minutes at 10 °C Category(ies) of usersProfessionalPack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 4.4.1. Use-specific instructions for use Remove gross soiling and pre-clean the surface before applying the product. Dilute the product with potable water to 3,0% (3 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once. Leave wet for 5 minutes at room temperature or for 30 minutes at 10°C. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.4.2. Use-specific risk mitigation measures See general directions for use. 4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.5. Use description Table 5. Use # 4 – Disinfection of hard non-porous surfaces (incl. machines and equipment) with dairy food contact (food, industrial, institutional area) Product typePT04: Food and feed areaWhere relevant, an exact description of the authorised use-Target organism(s) (including development stage)

Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces (incl. machines and equipment) with dairy food contact (food, industrial, institutional area). For example, ice-cream and shake machines, open plant cleaning in food factories or hard surfaces in kitchens. Application method(s) Method: manual application Detailed description:

  1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
  2. Dipping to wet small objects. Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,57% w/w. This is a 3% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Dilute the product to 3% v/v (3 ml product, add water up to 100 ml). Number and timing of application: Contact time: 5 minutes Category(ies) of usersProfessionalPack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 4.5.1. Use-specific instructions for use Dilute the product with potable water to 3,0% (3 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once. Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.5.2. Use-specific risk mitigation measures See general directions for use. 4.5.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.5.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.5.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use.
  3. GENERAL DIRECTIONS FOR USE OF THE META SPC 1 5.1. Instructions for use Comply with the instructions for use. Inform the authorisation holder if the treatment is ineffective. 5.2. Risk mitigation measures Wear protective chemical resistant gloves classified under EN 374 or equivalent, face protection consistent with EN 16321 or equivalent and a coverall consistent with EN 14605 or equivalent when handling the concentrate product (during dilution). The full texts of the EN standards are available in Section 6. Personal protective equipment (PPE) material to be specified by the authorisation holder within the product information. This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act.

Do not breathe vapour. Avoid contact with eyes and skin. Avoid splashes and spills during mixing and loading (dilution). Wash hands after handling. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. If symptoms: Call 112 or an ambulance for medical assistance. If no symptoms: Call a Poison Centre or a doctor. IF ON SKIN: Immediately wash with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor. IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112 or an ambulance for medical assistance. Information to Healthcare personnel/doctor: the eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid. IF SWALLOWED: Immediately rinse mouth. Do NOT induce vomiting. Give something to drink, if exposed person is able to swallow. Call 112 or an ambulance for medical assistance. 5.4. Instructions for safe disposal of the product and its packaging Dispose of unused product, its packaging and all other waste in accordance with local regulations. Do not discharge unused product on the ground, into water sources, into pipes nor down the drains. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Store in original container tightly closed. Store protected from light. Do not store above 40 °C. Shelf- life: 2 years. 6. OTHER INFORMATION The full titles of the EN standards referenced in section 5.2 Risk mitigation measures are: EN 374 - Protective gloves against dangerous chemicals and micro-organisms EN 16321 - Eye and face protection for occupational use EN 14605 - Protective clothing against liquid chemicals - Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]). Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) (OJ L 131, 5.5.1998, p. 11). 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 1 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s)TASKI Sani 4 in 1 PlusMarket area: EUAuthorisation numberEU-0031644-0001 1-1Common nameIUPAC nameFunctionCAS numberEC numberContent (%)L-(+)-lactic acidActive substance79-33-4201-196-217,6 % (w/w)Methanesulfonic acidNon-active substance75-75-2200-898-65,11 % (w/w)Alkyl ether carboxylic acidNon-active substance53563-70-59 % (w/w)Sulphonic acids, C14-17-sec-alkane, sodium saltsNon-active substance97489-15-1307-055-23 % (w/w)A mixture of: 2-ethylhexyl mono-D-glucopyranoside; 2-ethylhexyl di-D-glucopyranosideNon-active substance414-420-03,9 % (w/w)

7.2. Trade name(s), authorisation number and specific composition of each individual product Trade name(s)ANDY MultiPower Conc ProfessionalMarket area: EUANDYSAN MultiPower Conc ProfessionalMarket area: EUCIF MultiPower Conc ProfessionalMarket area: EUCif 4in1 Cleaner Disinfectant ConcentrateMarket area: EUDOMESTOS MultiPower Conc ProfessionalMarket area: EU Domestos 4in1 Cleaner Disinfectant ConcentrateMarket area: EUFLORASZEPT MultiPower Conc ProfessionalMarket area: EUGLORIX MultiPower Conc ProfessionalMarket area: EUGlorix 4in1 Cleaner Disinfectant ConcentrateMarket area: EUJIF MultiPower Conc ProfessionalMarket area: EUKLINEX MultiPower Conc ProfessionalMarket area: EUKlinex 4in1 Cleaner Disinfectant ConcentrateMarket area: EULIFEBUOY MultiPower Conc ProfessionalMarket area: EULYSOFORM MultiPower Conc ProfessionalMarket area: EULysoform 4in1 Cleaner Disinfectant ConcentrateMarket area: EUMetro Prof. 4 in 1 Plus ConcMarket area: EUOPTIMAX 4 in 1 Plus ConcMarket area: EUSAVO MultiPower Conc ProfessionalMarket area: EUSuma San 4in1 D10.7Market area: EUSUPERANDY MultiPower Conc ProfessionalMarket area: EUTASKI Sani 4 in 1 Plus ConcMarket area: EU VISS MultiPower Conc ProfessionalMarket area: EUViss 4in1 Cleaner Disinfectant ConcentrateMarket area: EUWe Clean 4 in 1 Plus ConcMarket area: EUAuthorisation numberEU-0031644-0002 1-1Common nameIUPAC nameFunctionCAS numberEC numberContent (%)L-(+)-lactic acidActive substance79-33-4201-196-217,6 % (w/w)Methanesulfonic acidNon-active substance75-75-2200-898-65,11 % (w/w)Alkyl ether carboxylic acidNon-active substance53563-70-59 % (w/w)Sulphonic acids, C14-17-sec-alkane, sodium saltsNon-active substance97489-15-1307-055-23 % (w/w)A mixture of: 2-ethylhexyl mono-D-glucopyranoside; 2-ethylhexyl di-D-glucopyranosideNon-active substance414-420-03,9 % (w/w) 7.3. Trade name(s), authorisation number and specific composition of each individual product Trade name(s)Divosan Freed ConcMarket area: EUSANO-Premium-PlusMarket area: EUSuma Ice & Shake SanitizerMarket area: EUSure Ice & Shake SanitizerMarket area: EUSure SanitizerMarket area: EUSURE Sanitizer AMarket area: EUTASKI Sani 4 in 1 FREE ConcMarket area: EUTASKI Sani 4 in 1 ZERO ConcMarket area: EU Authorisation numberEU-0031644-0003 1-1Common nameIUPAC nameFunctionCAS numberEC numberContent (%)L-(+)-lactic acidActive substance79-33-4201-196-217,6 % (w/w)Methanesulfonic acidNon-active substance75-75-2200-898-65,11 % (w/w)Alkyl ether carboxylic acidNon-active substance53563-70-59 % (w/w)Sulphonic acids, C14-17-sec-alkane, sodium saltsNon-active substance97489-15-1307-055-23 % (w/w)A mixture of: 2-ethylhexyl mono-D-glucopyranoside; 2-ethylhexyl di-D-glucopyranosideNon-active substance414-420-03,9 % (w/w) 7.4. Trade name(s), authorisation number and specific composition of each individual product Trade name(s)SURE Sanitizer BMarket area: EUAuthorisation numberEU-0031644-0004 1-1Common nameIUPAC nameFunctionCAS numberEC numberContent (%)L-(+)-lactic acidActive substance79-33-4201-196-217,6 % (w/w)Methanesulfonic acidNon-active substance75-75-2200-898-65,11 % (w/w)Alkyl ether carboxylic acidNon-active substance53563-70-59 % (w/w)Sulphonic acids, C14-17-sec-alkane, sodium saltsNon-active substance97489-15-1307-055-23 % (w/w)A mixture of: 2-ethylhexyl mono-D-glucopyranoside; 2-ethylhexyl di-D-glucopyranosideNon-active substance414-420-03,9 % (w/w)

7.5. Trade name(s), authorisation number and specific composition of each individual product Trade name(s)SURE Sanitizer CMarket area: EUSure Sanitizer 4in1Market area: EUSure Sanitizer 4in1 FreshMarket area: EUAuthorisation numberEU-0031644-0005 1-1Common nameIUPAC nameFunctionCAS numberEC numberContent (%)L-(+)-lactic acidActive substance79-33-4201-196-217,6 % (w/w)Methanesulfonic acidNon-active substance75-75-2200-898-65,11 % (w/w)Alkyl ether carboxylic acidNon-active substance53563-70-59 % (w/w)Sulphonic acids, C14-17-sec-alkane, sodium saltsNon-active substance97489-15-1307-055-23 % (w/w)A mixture of: 2-ethylhexyl mono-D-glucopyranoside; 2-ethylhexyl di-D-glucopyranosideNon-active substance414-420-03,9 % (w/w)

  1. META SPC 2 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 2 identifier IdentifierMeta SPC: Meta SPC 2 1.2. Suffix to the authorisation number Number1-2 1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area PT03: Veterinary hygiene
  2. META SPC 2 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 2 Common nameIUPAC nameFunctionCAS numberEC numberContent (%)L-(+)-lactic acidActive substance79-33-4201-196-217,6 - 17,6 % (w/w)Methanesulfonic acidNon-active substance75-75-2200-898-65,11 - 5,11 % (w/w)Alkyl ether carboxylic acidNon-active substance53563-70-59 - 9 % (w/w)Sulphonic acids, C14-17-sec-alkane, sodium saltsNon-active substance97489-15-1307-055-23 - 3 % (w/w)A mixture of: 2-ethylhexyl mono-D-glucopyranoside; 2-ethylhexyl di-D-glucopyranosideNon-active substance414-420-03,9 - 3,9 % (w/w) 2.2. Type(s) of formulation of the meta SPC 2 Formulation type(s)SL Soluble concentrate
  3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 2 Hazard statements H314: Causes severe skin burns and eye damage. H290: May be corrosive to metals. EUH071: Corrosive to the respiratory tract. EUH208: Contains Ethyl 2,3-epoxy-3-phenylbutyrate, Delta-damascone and Damascone. May produce an allergic reaction. Precautionary statements P260: Do not breathe vapours. P280: Wear protective gloves, protective clothing, eye protection, face protection. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a doctor or a physician. P405: Store locked up. P501: Dispose of contents to in accordance with national regulations. P501: Dispose of container to in accordance with national regulations. P234: Keep only in original packaging. P321: Specific treatment (see instruction on this label).
  4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1. Use # 1a - Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport).

Product typePT02: Disinfectants and algaecides not intended for direct application to humans or animalsWhere relevant, an exact description of the authorised use-Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Enveloped viruses Common name: Enveloped viruses Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport). Application method(s) Method: manual application Detailed description:

  1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
  2. Dipping to wet small objects. Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,38% w/w. This is a 2% v/v dilution fo the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Dilute the product to 2% v/v (2 ml product, add water up to 100 ml). Number and timing of application: Contact time: Bacteria – 5 minutes Yeasts - 15 minutes Enveloped viruses - 5 minutes Category(ies) of usersProfessionalPack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide) 4.1.1. Use-specific instructions for use Dilute the product with potable water to 2,0% (2 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once. Leave wet for 5 minutes against bacteria and enveloped viruses and 15 minutes against yeasts. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.1.2. Use-specific risk mitigation measures See general directions for use. 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See general directions for use. 4.2. Use description Table 2. Use # 1b – Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport) Product typePT04: Food and feed areaWhere relevant, an exact description of the authorised use-Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Enveloped viruses only Common name: Enveloped viruses only Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport). Application method(s) Method: manual application Detailed description:

  1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
  2. Dipping to wet small objects. Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,38% w/w. This is a 2% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Dilute the product to 2% v/v (2 ml product, add water up to 100 ml). Number and timing of application: Contact time: 15 minutes Category(ies) of usersProfessionalPack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 4.2.1. Use-specific instructions for use Dilute the product with potable water to 2,0% (2 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once. Leave wet for 15 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.2.2. Use-specific risk mitigation measures See general directions for use. 4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See general directions for use. 4.3. Use description Table 3. Use # 2 – Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area). Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area Where relevant, an exact description of the authorised use-Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Scientific name: Enveloped viruses only Common name: Enveloped viruses only Development stage: no data Field(s) of use indoor use Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area). Application method(s) Method: manual application Detailed description: Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,38% w/w. This is a 2% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2). Dilute the product to 2% v/v (2 ml product, add water up to 100 ml). Number and timing of application: Contact time: 5 minutes Category(ies) of usersprofessional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 4.3.1. Use-specific instructions for use Remove gross soiling and pre-clean the surface before applying the product. Dilute the product with potable water to 2,0% (2 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.3.2. Use-specific risk mitigation measures See general directions for use. 4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use.

4.4. Use description Table 4. Use # 3 - Disinfection of clean hard non-porous surfaces and small objects in a veterinary area Product typePT03: Veterinary hygieneWhere relevant, an exact description of the authorised use-Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of clean hard non-porous surfaces and small objects in a veterinary area. Application method(s) Method: manual application Detailed description:

  1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
  2. Dipping to wet small objects. Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,57% w/w. This is a 3% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected for 5 minutes and apply approx. 19 sprays /m2 or 25 ml/m2 for 30 minutes). Dilute the product to 3% v/v (3 ml product, add water up to 100 ml). Number and timing of application: Contact time: 5 minutes at room temperature (18-25 °C); 30 minutes at 10 °C Category(ies) of usersprofessionalPack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2.0; 2.5; 3.0; 5.0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 4.4.1. Use-specific instructions for use Remove gross soiling and pre-clean the surface before applying the product. Dilute the product with potable water to 3,0% (3 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product.The solution for dipping shall be used only once. Leave wet for 5 minutes at room temperature or for 30 minutes at 10°C. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.4.2. Use-specific risk mitigation measures See general directions for use. 4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See general directions for use. 4.5. Use description Table 5. Use # 4 – Disinfection of hard non-porous surfaces (incl. machines and equipment) with dairy food contact (food, industrial, institutional area) Product typePT04: Food and feed areaWhere relevant, an exact description of the authorised use-Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces (incl. machines and equipment) with dairy food contact (food, industrial, institutional area). For example, ice-cream and shake machines, open plant cleaning in food factories or hard surfaces in kitchens. Application method(s) Method: manual application Detailed description:

  1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
  2. Dipping to wet small objects. Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,57% w/w. This is a 3% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Dilute the product to 3% v/v (3 ml product, add water up to 100 ml). Number and timing of application: Contact time: 5 minutes Category(ies) of usersprofessionalPack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 4.5.1. Use-specific instructions for use Dilute the product with potable water to 3,0% (3 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once. Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.5.2. Use-specific risk mitigation measures See general directions for use. 4.5.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.5.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.5.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See general directions for use. 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 2 5.1. Instructions for use Comply with the instructions for use. Inform the authorisation holder if the treatment is ineffective. 5.2. Risk mitigation measures Wear protective chemical resistant gloves classified under EN 374 or equivalent, face protection consistent with EN 16321 or equivalent and a coverall consistent with EN 14605 or equivalent when handling the concentrate product (during dilution). The full texts of the EN standards are available in Section 6. Personal protective equipment (PPE) material to be specified by the authorisation holder within the product information. This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act. Do not breathe vapour. Avoid contact with eyes and skin. Avoid splashes and spills during mixing and loading (dilution). Wash hands after handling. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. If symptoms: Call 112 or an ambulance for medical assistance. If no symptoms: Call a Poison Centre or a doctor. IF ON SKIN: Immediately wash with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor. IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112 or an ambulance for medical assistance. Information to Healthcare personnel/doctor: the eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid. IF SWALLOWED: Immediately rinse mouth. Do NOT induce vomiting. Give something to drink, if exposed person is able to swallow. Call 112 or an ambulance for medical assistance. 5.4. Instructions for safe disposal of the product and its packaging Dispose of unused product, its packaging and all other waste in accordance with local regulations. Do not discharge unused product on the ground, into water sources, into pipes nor down the drains. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Store in original container tightly closed. Store protected from light. Do not store above 40 °C. Shelf- life: 2 years. 6. OTHER INFORMATION The full titles of the EN standards referenced in section 5.2 Risk mitigation measures are: EN 374 - Protective gloves against dangerous chemicals and micro-organisms EN 16321 - Eye and face protection for occupational use EN 14605 - Protective clothing against liquid chemicals - Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]).

Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) (OJ L 131, 5.5.1998, p. 11). 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 2 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s)Sure Freshener ConcMarket area: EUSure Freshener 7X ConcMarket area: EUSure Sanitiser ConcMarket area: EUSure Sanitiser 2X ConcMarket area: EUTASKI Sani 4 in 1 Freshener ConcMarket area: EUTASKI Sani 4 in 1 Freshener ConcentrateMarket area: EUZenith Freshener ConcMarket area: EUZenith Freshener 7X ConcMarket area: EUZenith Sanitiser ConcMarket area: EU Zenith Sanitiser 2X ConcMarket area: EU7X FRESHENER CONCENTRATEMarket area: EUAuthorisation numberEU-0031644-0006 1-2Common nameIUPAC nameFunctionCAS numberEC numberContent (%)L-(+)-lactic acidActive substance79-33-4201-196-217,6 % (w/w)Methanesulfonic acidNon-active substance75-75-2200-898-65,11 % (w/w)Alkyl ether carboxylic acidNon-active substance53563-70-59 % (w/w)Sulphonic acids, C14-17-sec-alkane, sodium saltsNon-active substance97489-15-1307-055-23 % (w/w)A mixture of: 2-ethylhexyl mono-D-glucopyranoside; 2-ethylhexyl di-D-glucopyranosideNon-active substance414-420-03,9 % (w/w)

  1. META SPC 3 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 3 identifier IdentifierMeta SPC: Meta SPC 3 1.2. Suffix to the authorisation number Number1-3 1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area PT03: Veterinary hygiene
  2. META SPC 3 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 3 Common nameIUPAC nameFunctionCAS numberEC numberContent (%)L-(+)-lactic acidActive substance79-33-4201-196-28,8 - 8,8 % (w/w)Methanesulfonic acidNon-active substance75-75-2200-898-62,56 - 2,56 % (w/w)Alkyl ether carboxylic acidNon-active substance53563-70-54,5 - 4,5 % (w/w) 2.2. Type(s) of formulation of the meta SPC 3 Formulation type(s)SL Soluble concentrate
  3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 3 Hazard statements H314: Causes severe skin burns and eye damage. H290: May be corrosive to metals. EUH071: Corrosive to the respiratory tract. Precautionary statements P260: Do not breathe vapours. P280: Wear protective gloves, protective clothing, eye protection, face protection. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a doctor or a physician. P405: Store locked up. P501: Dispose of contents to in accordance with national regulations.

P501: Dispose of container to in accordance with national regulations. P234: Keep only in original packaging. P321: Specific treatment (see instruction on this label). 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1. Use # 1a - Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport). Product typePT02: Disinfectants and algaecides not intended for direct application to humans or animalsWhere relevant, an exact description of the authorised use-Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Enveloped viruses Common name: Enveloped viruses Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport). Application method(s) Method: manual application Detailed description:

  1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
  2. Dipping to wet small objects. Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,38% w/w. This is a 4% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Dilute the product to 4% v/v (4 ml product, add water up to 100 ml). Number and timing of application: Contact time: Bacteria – 5 minutes Yeasts - 15 minutes Enveloped viruses - 5 minutes Category(ies) of usersprofessionalPack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide) 4.1.1. Use-specific instructions for use Dilute the product with potable water to 4,0% (4 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once. Leave wet for 5 minutes against bacteria and enveloped viruses and 15 minutes against yeasts. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.1.2. Use-specific risk mitigation measures

See general directions for use. 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.2. Use description Table 2. Use # 1b – Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport) Product typePT04: Food and feed areaWhere relevant, an exact description of the authorised use-Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Enveloped viruses only Common name: Enveloped viruses only Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport). Application method(s) Method: manual application Detailed description:

  1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
  2. Dipping to wet small objects. Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,38% w/w. This is a 4% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Dilute the product to 4% v/v (4 ml product, add water up to 100 ml). Number and timing of application: Contact time: 15 minutes Category(ies) of usersprofessionalPack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0.8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5: 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - poylamide). 4.2.1. Use-specific instructions for use Dilute the product with potable water to 4,0% (4 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once. Leave wet for 15 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.

4.2.2. Use-specific risk mitigation measures See general directions for use. 4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.3. Use description Table 3. Use # 2 – Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area). Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area Where relevant, an exact description of the authorised use- Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Scientific name: Enveloped viruses only Common name: Enveloped viruses only Development stage: no data Field(s) of use indoor use Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area). Application method(s) Method: manual application Detailed description: Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,38% w/w. This is a 4% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2). Dilute the product to 4% v/v (4 ml product, add water up to 100 ml). Number and timing of application: Contact time: 5 minutes Category(ies) of usersprofessionalPack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 4.3.1. Use-specific instructions for use Remove gross soiling and pre-clean the surface before applying the product. Dilute the product with potable water to 4,0% (4 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required.Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.3.2. Use-specific risk mitigation measures

See general directions for use. 4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.4. Use description Table 4. Use # 3 - Disinfection of clean hard non-porous surfaces and small objects in a veterinary area Product typePT03: Veterinary hygieneWhere relevant, an exact description of the authorised use-Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of clean hard non-porous surfaces and small objects in a veterinary area. Application method(s) Method: manual application Detailed description:

  1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
  2. Dipping to wet small objects. Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,57% w/w. This is a 6% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected for 5 minutes and apply approx. 19 sprays /m2 or 25 ml/m2 for 30 minutes). Dilute the product to 6% v/v (6 ml product, add water up to 100 ml). Number and timing of application: Contact time: 5 minutes at room temperature (18-25 °C); 30 minutes at 10 °C Category(ies) of usersprofessionalPack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 4.4.1. Use-specific instructions for use Remove gross soiling and pre-clean the surface before applying the product. Dilute the product with potable water to 6,0% (6 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once. Leave wet for 5 minutes at room temperature or for 30 minutes at 10°C. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.

4.4.2. Use-specific risk mitigation measures See general directions for use. 4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.5. Use description Table 5. Use # 4 – Disinfection of hard non-porous surfaces (incl. machines and equipment) with dairy food contact (food, industrial, institutional area) Product typePT04: Food and feed areaWhere relevant, an exact description of the authorised use-Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces (incl. machines and equipment) with dairy food contact (food, industrial, institutional area). For example, ice-cream and shake machines, open plant cleaning in food factories or hard surfaces in kitchens. Application method(s) Method: manual application Detailed description:

  1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
  2. Dipping to wet small objects. Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,57% w/w. This is a 6% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Dilute the product to 6% v/v (6 ml product, add water up to 100 ml). Number and timing of application: Contact time: 5 minutes Category(ies) of usersprofessional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20.0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 4.5.1. Use-specific instructions for use Dilute the product with potable water to 6,0% (6 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once. Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.

4.5.2. Use-specific risk mitigation measures See general directions for use. 4.5.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.5.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.5.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 3 5.1. Instructions for use Comply with the instructions for use. Inform the authorisation holder if the treatment is ineffective. 5.2. Risk mitigation measures Wear protective chemical resistant gloves classified under EN 374 or equivalent, face protection consistent with EN 16321 or equivalent and a coverall consistent with EN 14605 or equivalent when handling the concentrate product (during dilution). The full texts of the EN standards are available in Section 6. Personal protective equipment (PPE) material to be specified by the authorisation holder within the product information. This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act. Do not breathe vapour. Avoid contact with eyes and skin. Avoid splashes and spills during mixing and loading (dilution). Wash hands after handling. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. If symptoms: Call 112 or an ambulance for medical assistance. If no symptoms: Call a Poison Centre or a doctor. IF ON SKIN: Immediately wash with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor. IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112 or an ambulance for medical assistance. Information to Healthcare personnel/doctor: the eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid. IF SWALLOWED: Immediately rinse mouth. Do NOT induce vomiting. Give something to drink, if exposed person is able to swallow. Call 112 or an ambulance for medical assistance. 5.4. Instructions for safe disposal of the product and its packaging Dispose of unused product, its packaging and all other waste in accordance with local regulations. Do not discharge unused product on the ground, into water sources, into pipes nor down the drains. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage

Store in original container tightly closed. Store protected from light. Do not store above 40 °C. Shelf- life: 2 years. 6. OTHER INFORMATION The full titles of the EN standards referenced in section 5.2 Risk mitigation measures are: EN 374 - Protective gloves against dangerous chemicals and micro-organisms EN 16321 - Eye and face protection for occupational use EN 14605 - Protective clothing against liquid chemicals - Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]). Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) (OJ L 131, 5.5.1998, p. 11). 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 3 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s)ANDY MultiPower Plus ProfessionalMarket area: EUANDYSAN MultiPower Plus ProfessionalMarket area: EU CIF MultiPower Plus ProfessionalMarket area: EUDOMESTOS MultiPower Plus ProfessionalMarket area: EUFLORASZEPT MultiPower Plus ProfessionalMarket area: EUGLORIX MultiPower Plus ProfessionalMarket area: EUJIF MultiPower Plus ProfessionalMarket area: EUKLINEX MultiPower Plus ProfessionalMarket area: EULIFEBUOY MultiPower Plus ProfessionalMarket area: EULYSOFORM MultiPower Plus ProfessionalMarket area: EURoom Care R9.1 Des-PlusMarket area: EUSAVO MultiPower Plus ProfessionalMarket area: EUSUPERANDY MultiPower Plus ProfessionalMarket area: EUVISS MultiPower Plus ProfessionalMarket area: EUAuthorisation numberEU-0031644-0007 1-3Common nameIUPAC nameFunctionCAS numberEC numberContent (%)L-(+)-lactic acidActive substance79-33-4201-196-28,8 % (w/w)Methanesulfonic acidNon-active substance75-75-2200-898-62,56 % (w/w)Alkyl ether carboxylic acidNon-active substance53563-70-54,5 % (w/w) 7.2. Trade name(s), authorisation number and specific composition of each individual product Trade name(s)Room Care R9 Des-PlusMarket area: EUAuthorisation numberEU-0031644-0008 1-3Common nameIUPAC nameFunctionCAS numberEC numberContent (%)L-(+)-lactic acidActive substance79-33-4201-196-28,8 % (w/w)Methanesulfonic acidNon-active substance75-75-2200-898-62,56 % (w/w)Alkyl ether carboxylic acidNon-active substance53563-70-54,5 % (w/w)

  1. META SPC 4 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 4 identifier IdentifierMeta SPC: Meta SPC 4 1.2. Suffix to the authorisation number Number1-4 1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area
  2. META SPC 4 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 4 Common nameIUPAC nameFunctionCAS numberEC numberContent (%)L-(+)-lactic acidActive substance79-33-4201-196-20,352 - 0,352 % (w/w)

2.2. Type(s) of formulation of the meta SPC 4 Formulation type(s)AL Any other liquid 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 4 Hazard statementsPrecautionary statements 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1. Use # 1a - Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport). Product typePT02: Disinfectants and algaecides not intended for direct application to humans or animalsWhere relevant, an exact description of the authorised use-Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: enveloped viruses Common name: enveloped viruses Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport). Application method(s) Method: manual application Detailed description:

  1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
  2. Dipping to wet small objects. Application rate(s) and frequency Application Rate: Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). ready to use products Number and timing of application: Contact time: Bacteria – 5 minutes Yeasts - 15 minutes Enveloped viruses - 5 minutes Category(ies) of usersprofessionalPack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Spray bottles, HDPE: 0,75 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide) 4.1.1. Use-specific instructions for use Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in the product to wet the surface. The solution for dipping shall be used only once. Leave wet for 5 minutes against bacteria and enveloped viruses and 15 minutes against yeasts. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.1.2. Use-specific risk mitigation measures See general directions for use. 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

See general directions for use. 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.2. Use description Table 2. Use # 1b – Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport) Product typePT04: Food and feed areaWhere relevant, an exact description of the authorised use-Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Enveloped viruses only Common name: Enveloped viruses only Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport). Application method(s) Method: manual application Detailed description:

  1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
  2. Dipping to wet small objects. Application rate(s) and frequency Application Rate: Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Ready to use products Number and timing of application: Contact time: 15 minutes Category(ies) of usersprofessionalPack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Spray bottles, HDPE: 0,75 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 4.2.1. Use-specific instructions for use Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in the product to wet the surface. The solution for dipping shall be used only once. Leave wet for 15 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.2.2. Use-specific risk mitigation measures See general directions for use. 4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.3.

Use description Table 3. Use # 2 – Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area). Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area Where relevant, an exact description of the authorised use-Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Scientific name: Enveloped viruses only Common name: Enveloped viruses only Development stage: no data Field(s) of use indoor use Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area). Application method(s) Method: manual application Detailed description: Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. Application rate(s) and frequency Application Rate: Apply the product by fully wetting all surface (apply approx. 10 sprays /m2 or 13 ml/m2). Ready to use product Number and timing of application: Contact time: 5 minutes Category(ies) of usersprofessionalPack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Spray bottles, HDPE: 0,75 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 4.3.1. Use-specific instructions for use Remove gross soiling and pre-clean the surface before applying the product. Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.3.2. Use-specific risk mitigation measures See general directions for use. 4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 4 5.1. Instructions for use Comply with the instructions for use. Inform the authorisation holder if the treatment is ineffective. 5.2. Risk mitigation measures Not relevant. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

If medical advice is needed, have product container or label at hand IF IN EYES: If symptoms occur rinse with water. Remove contact lenses, if present and easy to do. Call a POISON CENTRE or a doctor. IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTRE or a doctor. IF SWALLOWED: If symptoms occur call a POISON CENTRE or a doctor. IF INHALED: If symptoms occur call a POISON CENTRE or a doctor. 5.4. Instructions for safe disposal of the product and its packaging Dispose of unused product, its packaging and all other waste in accordance with local regulations. Do not discharge unused product on the ground, into water sources, into pipes nor down the drains. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Store in original container tightly closed. Store protected from light. Do not store above 40 °C. Shelf- life: 2 years. 6. OTHER INFORMATION 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 4 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s)Room Care R9 RTUMarket area: EURoom Care R9.1 DesMarket area: EUAuthorisation numberEU-0031644-0009 1-4Common nameIUPAC nameFunctionCAS numberEC numberContent (%)L-(+)-lactic acidActive substance79-33-4201-196-20,352 % (w/w) 7.2. Trade name(s), authorisation number and specific composition of each individual product Trade name(s)Taski Sani 4 in 1 Plus SprayMarket area: EUAuthorisation numberEU-0031644-0010 1-4 Common nameIUPAC nameFunctionCAS numberEC numberContent (%)L-(+)-lactic acidActive substance79-33-4201-196-20,352 % (w/w) 7.3. Trade name(s), authorisation number and specific composition of each individual product Trade name(s)ANDY MultiPower ProfessionalMarket area: EUANDYSAN MultiPower ProfessionalMarket area: EUCIF MultiPower ProfessionalMarket area: EUCif 4in1 Cleaner DisinfectantMarket area: EUDOMESTOS MultiPower ProfessionalMarket area: EUDomestos 4in1 Cleaner DisinfectantMarket area: EUFLORASZEPT MultiPower ProfessionalMarket area: EUGLORIX MultiPower ProfessionalMarket area: EUGlorix 4in1 Cleaner DisinfectantMarket area: EUJIF MultiPower ProfessionalMarket area: EUKLINEX MultiPower ProfessionalMarket area: EUKlinex 4in1 Cleaner DisinfectantMarket area: EULIFEBUOY MultiPower ProfessionalMarket area: EU LYSOFORM MultiPower ProfessionalMarket area: EULysoform 4in1 Cleaner DisinfectantMarket area: EUMetro Prof. 4 in 1 Plus RTUMarket area: EUOPTIMAX 4 in 1 Plus RTUMarket area: EUSAVO MultiPower ProfessionalMarket area: EUSuma San 4in1 D10.7 SprayMarket area: EUSUPERANDY MultiPower ProfessionalMarket area: EUTaski Sani 4 in 1 Plus RTUMarket area: EUVISS MultiPower ProfessionalMarket area: EUViss 4in1 Cleaner DisinfectantMarket area: EUWe Clean 4 in 1 Plus RTUMarket area: EUAuthorisation numberEU-0031644-0011 1-4Common nameIUPAC nameFunctionCAS numberEC numberContent (%)L-(+)-lactic acidActive substance79-33-4201-196-20,352 % (w/w) 7.4. Trade name(s), authorisation number and specific composition of each individual product

Trade name(s)ANDY MultiPower FREE ProfessionalMarket area: EUANDY MultiPower ZERO ProfessionalMarket area: EUANDYSAN MultiPower FREE ProfessionalMarket area: EU ANDYSAN MultiPower ZERO ProfessionalMarket area: EUCIF MultiPower FREE ProfessionalMarket area: EUCIF MultiPower ZERO ProfessionalMarket area: EUDivosan Freed RTUMarket area: EUDOMESTOS MultiPower FREE ProfessionalMarket area: EUDOMESTOS MultiPower ZERO ProfessionalMarket area: EUFLORASZEPT MultiPower FREE ProfessionalMarket area: EUFLORASZEPT MultiPower ZERO ProfessionalMarket area: EUGLORIX MultiPower FREE ProfessionalMarket area: EUGLORIX MultiPower ZERO ProfessionalMarket area: EUJIF MultiPower FREE ProfessionalMarket area: EUJIF MultiPower ZERO ProfessionalMarket area: EUKLINEX MultiPower FREE ProfessionalMarket area: EUKLINEX MultiPower ZERO ProfessionalMarket area: EULIFEBUOY MultiPower FREE ProfessionalMarket area: EU LIFEBUOY MultiPower ZERO ProfessionalMarket area: EULYSOFORM MultiPower FREE ProfessionalMarket area: EULYSOFORM MultiPower ZERO ProfessionalMarket area: EUSAVO MultiPower FREE ProfessionalMarket area: EUSAVO MultiPower ZERO ProfessionalMarket area: EUSUPERANDY MultiPower FREE ProfessionalMarket area: EUSUPERANDY MultiPower ZERO ProfessionalMarket area: EUSure Sanitizer A-RTUMarket area: EUSure Sanitizer SprayMarket area: EUTASKI Sani 4 in 1 FREEMarket area: EUTASKI Sani 4 in 1 ZEROMarket area: EUVISS MultiPower FREE ProfessionalMarket area: EUVISS MultiPower ZERO ProfessionalMarket area: EUAuthorisation numberEU-0031644-0012 1-4Common nameIUPAC nameFunctionCAS numberEC numberContent (%)L-(+)-lactic acidActive substance79-33-4201-196-20,352 % (w/w) 7.5. Trade name(s), authorisation number and specific composition of each individual product Trade name(s)Sure Sanitizer B-RTUMarket area: EUAuthorisation numberEU-0031644-0013 1-4Common nameIUPAC nameFunctionCAS numberEC numberContent (%)L-(+)-lactic acidActive substance79-33-4201-196-20,352 % (w/w) 7.6. Trade name(s), authorisation number and specific composition of each individual product Trade name(s)Sure Sanitizer C-RTUMarket area: EUSure Sanitizer 4in1 SprayMarket area: EUSure Sanitizer 4in1 Fresh SprayMarket area: EUAuthorisation numberEU-0031644-0014 1-4Common nameIUPAC nameFunctionCAS numberEC numberContent (%)L-(+)-lactic acidActive substance79-33-4201-196-20,352 % (w/w) 7.7. Trade name(s), authorisation number and specific composition of each individual product Trade name(s)Sure Freshener RTUMarket area: EUSure Freshener 7X RTUMarket area: EUSure Sanitiser RTUMarket area: EUSure Sanitiser 2X RTUMarket area: EUTASKI Sani 4 in 1 FreshenerMarket area: EUTaski Sani 4 in 1 FreshenerMarket area: EUZenith Freshener RTUMarket area: EU Zenith Freshener 7X RTUMarket area: EUZenith Sanitiser RTUMarket area: EUZenith Sanitiser 2X RTUMarket area: EUAuthorisation numberEU-0031644-0015 1-4Common nameIUPAC nameFunctionCAS numberEC numberContent (%)L-(+)-lactic acidActive substance79-33-4201-196-20,352 % (w/w)

Metadata

Type
Forordning
År
2026
Ikrafttrædelsesdato
1. januar 1970