Commission Implementing Regulation (EU) 2026/899of 24 April 2026amending Implementing Regulation (EU) 2020/579 as regards administrative changes to the Union authorisation of the biocidal product family HYPRED’s octanoic acid based products(Text with EEA relevance)

Commission Implementing Regulation (EU) 2026/899 of 24 April 2026 amending Implementing Regulation (EU) 2020/579 as regards administrative changes to the Union authorisation of the biocidal product family HYPRED’s octanoic acid based products (Text with EEA relevance) THE EUROPEAN COMMISSION, Having regard to the Treaty on the Functioning of the European Union, Having regard to Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012 concerning the making available on the market and use of biocidal products OJ L 167, 27.6.2012, p. 1, ELI: http://data.europa.eu/eli/reg/2012/528/oj. , and in particular Article 50(2) thereof, Whereas: (1) On 27 April 2020, Commission Implementing Regulation (EU) 2020/579 Commission Implementing Regulation (EU) 2020/579 of 27 April 2020 granting a Union authorisation for the biocidal product family HYPRED’s octanoic acid based products (OJ L 133, 28.4.2020, p. 4, ELI: http://data.europa.eu/eli/reg_impl/2020/579/oj). granted a Union authorisation, under number EU-0021020-0000, to HYPRED SAS for the making available on the market and use of the biocidal product family HYPRED’s octanoic acid based products. The Annex to that Implementing Regulation provides the summary of product characteristics for that biocidal product family. (2) On 5 September 2022, HYPRED SAS submitted to the European Chemicals Agency (the Agency), in accordance with Article 11(1) of Commission Implementing Regulation (EU) 354/2013 Commission Implementing Regulation (EU) No 354/2013 of 18 April 2013 on changes of biocidal products authorised in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (OJ L 109, 19.4.2013, p.4, ELI: http://data.europa.eu/eli/reg_impl/2013/354/oj). , a notification of administrative changes to the Union authorisation for the biocidal product family HYPRED’s octanoic acid based products, as referred to in Title 1 of the Annex to that Regulation. The notification was recorded in the Register for Biocidal Products (Register) under case number BC-SL079611-22. The notified proposed changes to that authorisation concern the addition of trade names, changes of the administrative details for the manufacturing location sites and the addition of manufacturing location sites. (3) On 29 September 2022, the Agency submitted to the Commission, in accordance with Article 11(3) of Implementing Regulation (EU) No 354/2013, an opinion ECHA Opinion N° UAD-C-1613322-44-00/F of 29 September 2022 on the administrative changes of the Union authorisation of the biocidal product family HYPRED’s octanoic acid based products, https://echa.europa.eu/opinions-on-applications-for-union-authorisation. on the notified administrative changes to the Union authorisation for the biocidal product family HYPRED’s octanoic acid based products together with a revised summary of the biocidal product characteristics. In its opinion, the Agency concludes that the proposed changes are administrative changes as referred to in Article 50(3), point (a), of Regulation (EU) No 528/2012 and as specified in Title 1, Sections 1 and 2, of the Annex to Implementing Regulation (EU) No 354/2013, and that, after the implementation of the changes, the conditions of Article 19 of Regulation (EU) No 528/2012 will still be met.

(4) On 13 October 2022, the Agency transmitted to the Commission a revised summary of the product characteristics for the biocidal product family HYPRED’s octanoic acid based products in all official languages of the Union, covering the administrative changes applied for, in accordance with Article 11(6) of Implementing Regulation (EU) No 354/2013. (5) The Commission concurs with the opinion of the Agency and therefore considers it appropriate to amend the Union authorisation for the biocidal product family HYPRED’s octanoic acid based products to introduce the administrative changes requested by HYPRED SAS. (6) Except for the amendments regarding the proposed administrative changes, all other information included in the summary of the biocidal product characteristics of HYPRED’s octanoic acid based products, as set out in the Annex to Implementing Regulation (EU) 2020/579, remains unchanged. (7) In order to enhance clarity and to ease the access of users and interested parties to the consolidated version of the summary of the biocidal product characteristics which is to be published by the Agency, the Annex to Implementing Regulation (EU) 2020/579 should be replaced in its entirety. Due to a change in the format used for the generation of the summary of biocidal product characteristics in the Register in February 2024, the summary of biocidal product characteristics in that Annex should also include some minor editorial and layout changes. (8) Implementing Regulation (EU) 2020/579 should therefore be amended accordingly, HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Implementing Regulation (EU) 2020/579 is replaced by the text set out in the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union. This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 24 April 2026. For the Commission The President Ursula von der Leyen

Annex

ANNEX Summary of product characteristics for a biocidal product family HYPRED‘s octanoic acid based products Product type(s) PT04: Food and feed area Authorisation number EU-0021020-0000 R4BP asset number EU-0021020-0000 PART I FIRST INFORMATION LEVEL

1. ADMINISTRATIVE INFORMATION 1.1. Family name NameHYPRED‘s octanoic acid based products 1.2. Product type(s) Product type(s)PT04: Food and feed area 1.3. Authorisation holder Name and address of the authorisation holderNameHYPRED SASAddress55, boulevard Jules Verger 35803 DINARD FRAuthorisation numberEU-0021020-0000R4BP asset numberEU-0021020-0000Date of the authorisation18 May 2020Expiry date of the authorisation30 April 2030 1.4. Manufacturer(s) of the product Name of manufacturerHYPRED SASAddress of manufacturer55 Boulevard Jules Verger 35803 DINARD FranceLocation of manufacturing sites HYPRED SAS site 1 HYPRED SAS - 55 Boulevard Jules Verger - BP 10180 35803 DINARD France HYPRED SAS site 2 KERSIA POLSKA Sp.z.o.o,. Niepruszewo, ul. Kasztanowa 4 64320 BUK Poland

HYPRED SAS site 3 KERSIA IBERICA S.L Pol. Miguel Eguía C/Zarapuz s/n 31200 ESTELLA (NAVARRA) Spain HYPRED SAS site 4 KERSIA DEUTSCHLAND GmbH Marie-Curie-Straße 23 53332 BORNHEIM – SECHTEM Germany HYPRED SAS site 5 KERSIA ITALIA s.r.l. Strada Montodine-Gombito Loc. Cà Nova 26010 RIPALTA ARPINA (CR) Italy HYPRED SAS site 6 HYPRED SAS (KERSIA Group) - Zone Industrielle Le Roineau 72500 Vaas France HYPRED SAS site 7 KERSIA AUSTRIA GmbH - PFONGAUERSTRAßE 17 5202 NEUMARKT AM WALLERSEE Austria HYPRED SAS site 8 KERSIA DEUTSCHLAND GmbH - OBERBRÜHLSTRAßE 16-18 87700 MEMMINGEN Germany HYPRED SAS site 9 Kilco Holdings Ltd (KERSIA Group) - Broomhouses 2 Industrial Estate Old Glasgow Road DG11 2SD LOCKERBIE United Kingdom of Great Britain and Northern Ireland (the) HYPRED SAS site 10 Kilco (International) Ltd (KERSIA Group) - 1A Trench Road Mallusk Newtownabbey BT36 4TY CO ANTRIM Ireland HYPRED SAS site 11 Medentech Ltd (KERSIA Group) - Clonard Road Y35Y7WY WEXFORD Ireland HYPRED SAS site 12 SOPURA (KERSIA Group) - Parc Paysager de Tyberchamps 14 7180 SENEFFE Belgium HYPRED SAS site 13 SOPURA Quimica (KERSIA Group) - Pol. Ind. La Canaleta Avinguda Júpiter n° 7 25300 TARREGA (LLEIDA) Spain HYPRED SAS site 14 Holchem Laboratories Ltd (KERSIA Group) - Gateway House, Pilsworth Road, Pilsworth Industrial Estate BL9 8RD Bury United Kingdom of Great Britain and Northern Ireland (the) HYPRED SAS site 15 Bio Armor Développement (KERSIA Group) - Zone industrielle de la Gare 22940 PLAINTEL France 1.5. Manufacturer(s) of the active substance(s) Active substanceOctanoic acidName of manufacturerEmery Oleochemicals (M)Address of manufacturerSdn Bhd (63112-D), Lot 4, Jalan Perak, Kawasan Perusahaan 42500 Telok Panglima Garang, Selangor MalaysiaLocation of manufacturing sitesEmery Oleochemicals (M) site 1 Sdn Bhd (63112-D), Lot 4, Jalan Perak, Kawasan Perusahaan 42500 Telok Panglima Garang, Selangor Malaysia 2. PRODUCT FAMILY COMPOSITION AND FORMULATION 2.1. Qualitative and quantitative information on the composition of the family Common nameIUPAC nameFunctionCAS numberEC numberContent (%)Octanoic acidActive substance124-07-2204-677-53 - 10 % (w/w)Methanesulfonic acidNon-active substance75-75-2200-898-60 - 21 % (w/w)L-(+)-Lactic acidNon-active substance79-33-4201-196-20 - 17,6 % (w/w)N,N-dimethyl-1-Decanamine, N-oxidNon-active substance2605-79-0220-020-52,25 - 6 % (w/w)Ethoxylated alcoholEthoxylated alcoholNon-active substance31726-34-8500-077-50 -15 % (w/w) 2.2. Type(s) of formulation Formulation type(s)SL Soluble concentrate PART II SECOND INFORMATION LEVEL META SPC(S)

1. META SPC 1 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 1 identifier IdentifierMeta SPC: meta SPC 1 1.2. Suffix to the authorisation number Number1-1 1.3. Product type(s) Product type(s)PT04: Food and feed area
2. META SPC 1 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 1 Common nameIUPAC nameFunctionCAS numberEC numberContent (%)Octanoic acidActive substance124-07-2204-677-53 - 3 % (w/w)Methanesulfonic acidNon-active substance75-75-2200-898-621 - 21 % (w/w)N,N-dimethyl-1-Decanamine, N-oxidNon-active substance2605-79-0220-020-52,25 - 2,25 % (w/w)Ethoxylated alcoholEthoxylated alcoholNon-active substance31726-34-8500-077-55 - 5 % (w/w)

2.2. Type(s) of formulation of the meta SPC 1 Formulation type(s)SL Soluble concentrate 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 1 Hazard statements H290: May be corrosive to metals. H314: Causes severe skin burns and eye damage. H335: May cause respiratory irritation. H412: Harmful to aquatic life with long lasting effects. Precautionary statements P280: Wear protective gloves. P280: Wear protective clothing. P280: Wear eye protection. P280: Wear face protection. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a POISON CENTER. P501: Dispose of contents local/regional/national/international regulation. P273: Avoid release to the environment. 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1 Use #1.1 - Circulation in dairy industry Product typePT04: Food and feed areaWhere relevant, an exact description of the authorised use-Target organism(s) (including development stage) Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Field(s) of use indoor use Cleaning - disinfection of circuits in dairy industry Application method(s) Method: Closed system : Circulation Detailed description: CIP, circulation Application rate(s) and frequency Application Rate: - Use 1 % product solution for bactericidal activity and 1,5 % product solution for yeasticidal activity Number and timing of application: 1 to 3 cycles per day, and 208 to 360 days per year Category(ies) of usersprofessionalPack sizes and packaging material Opaque jerrycan HDPE 5L Opaque jerrycan HDPE 10L Opaque jerrycan HDPE 22L Opaque drum HDPE 60L Opaque drum HDPE 120L Opaque drum 220L Opaque container HDPE 640L Opaque container HDPE 1000L 4.1.1. Use-specific instructions for use Rinse the circuits with drinking water before disinfection. Apply the product by circulation. Product concentration and contact time: 1 % bactericidal in 5 minutes 1,5 % yeasticidal in 15 minutes Temperature: 40 - 85 °C Final rinse with drinking water. 4.1.2. Use-specific risk mitigation measures See general directions for use 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use 4.2. Use description Table 2 Use# 1.2 - Circulation in farms Product typePT04: Food and feed areaWhere relevant, an exact description of the authorised use-Target organism(s) (including development stage)

Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Field(s) of use indoor use Cleaning - disinfection of milking equipment and milking robots in farms Application method(s) Method: Closed system : Circulation Detailed description: Circulation Application rate(s) and frequency Application Rate: - Use 0,8 % product solution for bactericidal activity and 1,5 % product solution for yeasticidal activity. Number and timing of application: The milk installationis cleaned and disinfected twice a day and the milk tank is cleaned and disinfected once every three days. Category(ies) of usersprofessionalPack sizes and packaging material Opaque jerrycan HDPE 5L Opaque jerrycan HDPE 10L Opaque jerrycan HDPE 22L Opaque drum HDPE 60L Opaque drum HDPE 120L Opaque drum 220L Opaque container HDPE 640L Opaque container HDPE 1000L 4.2.1. Use-specific instructions for use Machines with or without a programmer. 1) After milking, rinse the equipment with warm drinking water. 2) Apply the solution by circulation at an initial recommended temperature of 60 °C minimum to achieve a final temperature of 40-45 °C. Product concentration and contact time : 0,8 % bactericidal in 10 minutes 1,5 % yeasticidal in 15 minutes Do not use at temperature above 75 °C. 3) Rinse with cold drinking water. Use the product twice a day or once a day when alternating with another product. When alternating, use a cleaner-disinfectant or a cleaning product 1 to 4 times per week depending on the temperature reached in the system. Contact your supplier for choosing the alternative product and the frequency of use. Do not mix [name of the authorised product] with an alkaline or chlorinated alkaline product. 4.2.2. Use-specific risk mitigation measures See general directions for use 4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use 4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use 4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 1 5.1. Instructions for use See use specific instructions for use. 5.2. Risk mitigation measures Wear protective chemical resistant gloves, coverall and eye protection during product handling phase (protective material to be specified by the authorisation holder within the product information). Ensure adequate ventilation during the application. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment Take the contaminated clothes and shoes off immediately. Wash them before wearing them again. FIRST AID IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER or doctor/physician.

IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. Immediately call a POISON CENTER or doctor/physician. IF IN EYES: Rinse at once with a soft stream of water for at least 15 minutes, eyes wide open. Remove contact lenses if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTER or doctor/physician. Refer to the Safety Data Sheets available for professional user. It contains an emergency phone number When asking for medical advice keep packaging or label at hand and call a POISON CENTER or doctor/physician. NEVER administer liquids/solids orally to an impaired or unconscious individual; place individual in left sideways position with the head lowered and the knees bent. NEVER LEAVE THE AFFECTED INDIVIDUAL UNATTENDED! 5.4. Instructions for safe disposal of the product and its packaging Do not discharge the product directly to sewer or to the environment. Dispose the product and its packaging in accordance with applicable local and national regulations. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Shelf life: 2 years in HDPE Conditions of storage: keep only in the original packaging. Keep container closed. Do not store at temperature above 40 °C. 6. OTHER INFORMATION A cleaning claim has not been assessed as it is out of the scope of the BPR. 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 1 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s)HYPRACID ONEMarket area: EUDEPTACID BDMarket area: EUprevides®MSMarket area: EUDEPTACID OCTACIPMarket area: EUOCTACID ONEMarket area: EUOCTA-ONEMarket area: EUAuthorisation numberEU-0021020-0001 1-1Common nameIUPAC nameFunctionCAS numberEC numberContent (%)Octanoic acidActive substance124-07-2204-677-53 % (w/w)Methanesulfonic acidNon-active substance75-75-2200-898-621 % (w/w)N,N-dimethyl-1-Decanamine, N-oxidNon-active substance2605-79-0220-020-52,25 % (w/w)Ethoxylated alcoholEthoxylated alcoholNon-active substance31726-34-8500-077-55 % (w/w)

1. META SPC 2 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 2 identifier IdentifierMeta SPC: meta SPC 2 1.2. Suffix to the authorisation number Number1-2 1.3. Product type(s) Product type(s)PT04: Food and feed area
2. META SPC 2 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 2 Common nameIUPAC nameFunctionCAS numberEC numberContent (%)Octanoic acidActive substance124-07-2204-677-510 - 10 % (w/w)Methanesulfonic acidNon-active substance75-75-2200-898-614 - 14 % (w/w)N,N-dimethyl-1-Decanamine, N-oxidNon-active substance2605-79-0220-020-54,5 - 4,5 % (w/w)Ethoxylated alcoholEthoxylated alcoholNon-active substance31726-34-8500-077-515 - 15 % (w/w) 2.2. Type(s) of formulation of the meta SPC 2 Formulation type(s)SL Soluble concentrate
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 2

Hazard statements H290: May be corrosive to metals. H302: Harmful if swallowed. H314: Causes severe skin burns and eye damage. H412: Harmful to aquatic life with long lasting effects. Precautionary statements P280: Wear protective gloves. P280: Wear protective clothing. P280: Wear eye protection. P280: Wear face protection. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a POISON CENTER. P501: Dispose of contents local/regional/national/international regulation. P273: Avoid release to the environment. 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1 Use#2.1 - Circulation Product typePT04: Food and feed areaWhere relevant, an exact description of the authorised use-Target organism(s) (including development stage) Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Field(s) of use indoor use Disinfection of circuits in breweries, dairy and beverage industries Application method(s) Method: Closed system : Circulation Detailed description: CIP, circulation Application rate(s) and frequency Application Rate: - Use 0,4 % product solution for bactericidal activity and 0,6 % product solution for yeasticidal activity. Number and timing of application: 1 to 3 cycles per day, and 208 to 360 days per year Category(ies) of usersprofessionalPack sizes and packaging material Opaque jerrycan HDPE 5L Opaque jerrycan HDPE 10L Opaque jerrycan HDPE 22L Opaque drum HDPE 60L Opaque drum HDPE 120L Opaque drum 220L Opaque container HDPE 640L Opaque container HDPE 1000L 4.1.1. Use-specific instructions for use See general directions for use 4.1.2. Use-specific risk mitigation measures See general directions for use 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 2 5.1. Instructions for use Prior to the application of the product, clean with a detergent and rinse with drinking water. Apply the product by circulation. Product concentration and contact time: 0,4 % bactericidal in 5 minutes 0,6 % yeasticidal in 15 minutes Temperature: 20 - 85 °C Final rinse with drinking water. 5.2. Risk mitigation measures Wear protective chemical resistant gloves, coverall and eye protection during product handling phase (protective material to be specified by the authorisation holder within the product information).

Ensure adequate ventilation during the application. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment Take the contaminated clothes and shoes off immediately. Wash them before wearing them again. FIRST AID IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER or doctor/physician. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. Immediately call a POISON CENTER or doctor/physician. IF IN EYES: Rinse at once with a soft stream of water for at least 15 minutes, eyes wide open. Remove contact lenses if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTER or doctor/physician. Refer to the Safety Data Sheets available for professional user. It contains an emergency phone number. When asking for medical advice keep packaging or label at hand and call a POISON CENTER or doctor/physician. NEVER administer liquids/solids orally to an impaired or unconscious individual; place individual in left sideways position with the head lowered and the knees bent. NEVER LEAVE THE AFFECTED INDIVIDUAL UNATTENDED! 5.4. Instructions for safe disposal of the product and its packaging Do not discharge the product directly to sewer or to the environment. Dispose the product and its packaging in accordance with applicable local and national regulations. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Shelf life: 2 years in HDPE Conditions of storage: keep only in the original packaging. Keep container closed. Keep in a cool place. Do not store at temperature above 40 °C. 6. OTHER INFORMATION 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 2 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s)DEPTACID CCBMarket area: EUAuthorisation numberEU-0021020-0002 1-2Common nameIUPAC nameFunctionCAS numberEC numberContent (%)Octanoic acidActive substance124-07-2204-677-510 % (w/w)Methanesulfonic acidNon-active substance75-75-2200-898-614 % (w/w)N,N-dimethyl-1-Decanamine, N-oxidNon-active substance2605-79-0220-020-54,5 % (w/w)Ethoxylated alcoholEthoxylated alcoholNon-active substance31726-34-8500-077-515 % (w/w)

1. META SPC 3 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 3 identifier IdentifierMeta SPC: meta SPC 3 1.2. Suffix to the authorisation number Number1-3 1.3. Product type(s) Product type(s)PT04: Food and feed area
2. META SPC 3 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 3 Common nameIUPAC nameFunctionCAS numberEC numberContent (%)Octanoic acidActive substance124-07-2204-677-510 - 10 % (w/w)L-(+)-Lactic acidNon-active substance79-33-4201-196-217,6 - 17,6 % (w/w)N,N-dimethyl-1-Decanamine, N-oxidNon-active substance2605-79-0220-020-56 - 6 % (w/w)

2.2. Type(s) of formulation of the meta SPC 3 Formulation type(s)SL Soluble concentrate 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 3 Hazard statements H290: May be corrosive to metals. H314: Causes severe skin burns and eye damage. H412: Harmful to aquatic life with long lasting effects. Precautionary statements P280: Wear protective gloves. P280: Wear protective clothing. P280: Wear eye protection. P280: Wear face protection. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a POISON CENTER. P501: Dispose of contents local/regional/national/international regulation. P273: Avoid release to the environment. 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1 Use#3.1 - Circulation Product typePT04: Food and feed areaWhere relevant, an exact description of the authorised use- Target organism(s) (including development stage) Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Field(s) of use indoor use Disinfection of circuits in breweries, dairy and beverage industries Application method(s) Method: Closed system : Circulation Detailed description: CIP, circulation Application rate(s) and frequency Application Rate: - Use 0,4 % product solution Number and timing of application: 1 to 3 cycles per day, and 208 to 360 days per year Category(ies) of usersprofessionalPack sizes and packaging material Opaque jerrycan HDPE 5L Opaque jerrycan HDPE 10L Opaque jerrycan HDPE 22L Opaque drum HDPE 60L Opaque drum HDPE 120L Opaque drum 220L Opaque container HDPE 640L Opaque container HDPE 1000L 4.1.1. Use-specific instructions for use See general directions for use 4.1.2. Use-specific risk mitigation measures See general directions for use 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 3 5.1. Instructions for use Prior to the application of the product, clean with a detergent and rinse with drinking water. Apply the product by circulation. Product concentration: 0,4 % Contact time: 5 minutes for bactericidal activity 15 minutes for yeasticidal activity Temperature: 20 - 85 °C Final rinse with drinking water. 5.2. Risk mitigation measures Wear protective chemical resistant gloves, coverall and eye protection during product handling phase (protective material to be specified by the authorisation holder within the product information).

Ensure adequate ventilation during the application. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment Take the contaminated clothes and shoes off immediately. Wash them before wearing them again. FIRST AID IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER or doctor/physician. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. Immediately call a POISON CENTER or doctor/physician. IF IN EYES: Rinse at once with a soft stream of water for at least 15 minutes, eyes wide open. Remove contact lenses if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTER or doctor/physician. Refer to the Safety Data Sheets available for professional user. It contains an emergency phone number. When asking for medical advice keep packaging or label at hand and call a POISON CENTER or doctor/physician. NEVER administer liquids/solids orally to an impaired or unconscious individual; place individual in left sideways position with the head lowered and the knees bent. NEVER LEAVE THE AFFECTED INDIVIDUAL UNATTENDED! 5.4. Instructions for safe disposal of the product and its packaging Do not discharge the product directly to sewer or to the environment. Dispose the product and its packaging in accordance with applicable local and national regulations. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Shelf life: 2 years in HDPE Conditions of storage: keep only in the original packaging. Keep container closed. Do not store at temperature above 40 °C. 6. OTHER INFORMATION 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 3 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s)DEPTACID CBMarket area: EUDEPTIL CBMarket area: EUSOPURSAN CBMarket area: EUAuthorisation numberEU-0021020-0003 1-3Common nameIUPAC nameFunctionCAS numberEC numberContent (%)Octanoic acidActive substance124-07-2204-677-510 % (w/w)L-(+)-Lactic acidNon-active substance79-33-4201-196-217,6 % (w/w)N,N-dimethyl-1-Decanamine, N-oxidNon-active substance2605-79-0220-020-56 % (w/w)

1. META SPC 4 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 4 identifier IdentifierMeta SPC: meta SPC 4 1.2. Suffix to the authorisation number Number1-4 1.3. Product type(s) Product type(s)PT04: Food and feed area
2. META SPC 4 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 4 Common nameIUPAC nameFunctionCAS numberEC numberContent (%)Octanoic acidActive substance124-07-2204-677-53 - 3 % (w/w) Methanesulfonic acidNon-active substance75-75-2200-898-621 - 21 % (w/w)N,N-dimethyl-1-Decanamine, N-oxidNon-active substance2605-79-0220-020-53 - 3 % (w/w)Ethoxylated alcoholEthoxylated alcoholNon-active substance31726-34-8500-077-55 - 5 % (w/w)

2.2. Type(s) of formulation of the meta SPC 4 Formulation type(s)SL Soluble concentrate 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 4 Hazard statements H290: May be corrosive to metals. H314: Causes severe skin burns and eye damage. H335: May cause respiratory irritation. H412: Harmful to aquatic life with long lasting effects. Precautionary statements P280: Wear protective gloves. P280: Wear protective clothing. P280: Wear eye protection. P280: Wear face protection. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a POISON CENTER. P501: Dispose of contents local/regional/national/international regulation. P273: Avoid release to the environment. 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1 Use # 4.1 – Separative membranes circulation Product typePT04: Food and feed areaWhere relevant, an exact description of the authorised use- Target organism(s) (including development stage) Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Field(s) of use indoor use Disinfectant or cleaner-disinfectant for membranes used in reverse osmosis and nanofiltration in dairy and beverage industries. Application method(s) Method: Closed system : Circulation Detailed description: Circulation Application rate(s) and frequency Application Rate: - Use 0,75 % product solution if cleaning is applied prior to the disinfection Use 1 % product solution if no cleaning is applied prior to the disinfection Number and timing of application: 1 to 3 cycles per day, and 104 to 312 days per year Category(ies) of usersprofessionalPack sizes and packaging material Opaque jerrycan HDPE 5L Opaque jerrycan HDPE 10L Opaque jerrycan HDPE 22L Opaque drum HDPE 60L Opaque drum HDPE 120L Opaque drum 220L Opaque container HDPE 640L Opaque container HDPE 1000L 4.1.1. Use-specific instructions for use See general directions for use 4.1.2. Use-specific risk mitigation measures See general directions for use 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 4 5.1. Instructions for use Rinse the membranes with drinking water or clean and rinse with drinking water before disinfection. Apply the product by circulation

Product concentration after water rinse: 1 % Product concentration with previous cleaning: 0,75 % Contact time: 5 minutes for bactericidal activity 15 minutes for yeasticidal activity Temperature: 40 – 85 °C Final rinse with drinking water. 5.2. Risk mitigation measures Wear protective chemical resistant gloves, coverall and eye protection during product handling phase (protective material to be specified by the authorisation holder within the product information). Ensure adequate ventilation during the application. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment Take the contaminated clothes and shoes off immediately. Wash them before wearing them again. FIRST AID IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER or doctor/physician. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. Immediately call a POISON CENTER or doctor/physician. IF IN EYES: Rinse at once with a soft stream of water for at least 15 minutes, eyes wide open. Remove contact lenses if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTER or doctor/physician. Refer to the Safety Data Sheets available for professional user. It contains an emergency phone number When asking for medical advice keep packaging or label at hand and call a POISON CENTER or doctor/physician. NEVER administer liquids/solids orally to an impaired or unconscious individual; place individual in left sideways position with the head lowered and the knees bent. NEVER LEAVE THE AFFECTED INDIVIDUAL UNATTENDED! 5.4. Instructions for safe disposal of the product and its packaging Do not discharge the product directly to sewer or to the environment. Dispose the product and its packaging in accordance with applicable local and national regulations. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Shelf life: 2 years in HDPE Conditions of storage: keep only in the original packaging. Keep container closed. Do not store at temperature above 40 °C. 6. OTHER INFORMATION A cleaning claim has not been assessed as it is out of the scope of the BPR. 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 4 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s)DEPTACID WCMMarket area: EUSOPURCLEAN NF WCMMarket area: EUOsmotask ASMarket area: EUAuthorisation numberEU-0021020-0004 1-4Common nameIUPAC nameFunctionCAS numberEC numberContent (%)Octanoic acidActive substance124-07-2204-677-53 % (w/w)Methanesulfonic acidNon-active substance75-75-2200-898-621 % (w/w)N,N-dimethyl-1-Decanamine, N-oxidNon-active substance2605-79-0220-020-53 % (w/w)Ethoxylated alcoholEthoxylated alcoholNon-active substance31726-34-8500-077-55 % (w/w)